tag | line | file | source code |
ctrl | 181 | drivers/char/scc.c | OutReg(scc->ctrl, reg, (scc->wreg[reg] = val)); |
ctrl | 187 | drivers/char/scc.c | OutReg(scc->ctrl, reg, (scc->wreg[reg] |= val)); |
ctrl | 193 | drivers/char/scc.c | OutReg(scc->ctrl, reg, (scc->wreg[reg] &= ~val)); |
ctrl | 457 | drivers/char/scc.c | default : printk("scc_isr(): unknown interrupt status (addr %4.4x, state %2.2x)\n",scc->ctrl,vector); |
ctrl | 504 | drivers/char/scc.c | Outb(scc->ctrl,0x38); /* Reset Highest IUS" opcode to WR0 */ |
ctrl | 594 | drivers/char/scc.c | Outb(scc->ctrl,RES_Tx_P); /* reset pending int */ |
ctrl | 602 | drivers/char/scc.c | Outb(scc->ctrl, RES_Tx_CRC); /* reset CRC generator */ |
ctrl | 607 | drivers/char/scc.c | Outb(scc->ctrl, RES_EOM_L); |
ctrl | 663 | drivers/char/scc.c | status = InReg(scc->ctrl,R0); |
ctrl | 681 | drivers/char/scc.c | OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */ |
ctrl | 703 | drivers/char/scc.c | Outb(scc->ctrl, RES_Tx_P); |
ctrl | 704 | drivers/char/scc.c | Outb(scc->ctrl, RES_EXT_INT); /* reset ext/status interrupts */ |
ctrl | 715 | drivers/char/scc.c | Outb(scc->ctrl, RES_Tx_P); /* just to be sure */ |
ctrl | 724 | drivers/char/scc.c | Outb(scc->ctrl,RES_EXT_INT); |
ctrl | 781 | drivers/char/scc.c | status = InReg(scc->ctrl,R1); /* read receiver status */ |
ctrl | 813 | drivers/char/scc.c | Outb(scc->ctrl,ERR_RES); |
ctrl | 849 | drivers/char/scc.c | OutReg(scc->ctrl, R14, SSBR|scc->wreg[R14]); /* DPLL source = BRG */ |
ctrl | 850 | drivers/char/scc.c | OutReg(scc->ctrl, R14, SNRZI|scc->wreg[R14]); /* DPLL NRZI mode */ |
ctrl | 911 | drivers/char/scc.c | OutReg(scc->ctrl, R14, DISDPLL); |
ctrl | 925 | drivers/char/scc.c | if((InReg(scc->ctrl,R0)) & DCD) /* DCD is now ON */ |
ctrl | 933 | drivers/char/scc.c | Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ |
ctrl | 934 | drivers/char/scc.c | Outb(scc->ctrl,RES_EXT_INT); /* must be done twice */ |
ctrl | 936 | drivers/char/scc.c | scc->status = InReg(scc->ctrl,R0); /* read initial status */ |
ctrl | 966 | drivers/char/scc.c | Outb(scc->ctrl + 4, Option | (tx? 0x80 : 0)); |
ctrl | 1544 | drivers/char/scc.c | if (!scc->ctrl) continue; |
ctrl | 1548 | drivers/char/scc.c | Outb(scc->ctrl, 0); |
ctrl | 1549 | drivers/char/scc.c | OutReg(scc->ctrl,R9,FHWRES); /* force hardware reset */ |
ctrl | 1672 | drivers/char/scc.c | Outb(scc->ctrl,0); /* Make sure pointer is written */ |
ctrl | 1819 | drivers/char/scc.c | | ((InReg(scc->ctrl,R0) & DCD) ? TIOCM_CAR : 0) |
ctrl | 1820 | drivers/char/scc.c | | ((InReg(scc->ctrl,R0) & CTS) ? TIOCM_CTS : 0); |
ctrl | 2192 | drivers/char/scc.c | register io_port ctrl; |
ctrl | 2243 | drivers/char/scc.c | ctrl = SCC_ctrl[chip * 2]; |
ctrl | 2244 | drivers/char/scc.c | if (!ctrl) continue; |
ctrl | 2254 | drivers/char/scc.c | check_region(ctrl, 1); |
ctrl | 2256 | drivers/char/scc.c | Outb(ctrl, 0); |
ctrl | 2257 | drivers/char/scc.c | OutReg(ctrl,R13,0x55); /* is this chip realy there? */ |
ctrl | 2259 | drivers/char/scc.c | if (InReg(ctrl,R13) != 0x55 ) |
ctrl | 2267 | drivers/char/scc.c | SCC_Info[2*chip ].ctrl = SCC_ctrl[2*chip]; |
ctrl | 2272 | drivers/char/scc.c | SCC_Info[2*chip+1].ctrl = SCC_ctrl[2*chip+1]; |
ctrl | 2288 | drivers/char/scc.c | SCC_Info[chan].ctrl? "found" : "missing"); |
ctrl | 2290 | drivers/char/scc.c | if (SCC_Info[chan].ctrl == 0) |
ctrl | 183 | drivers/sound/mpu401.c | int ctrl = msg[1]; |
ctrl | 185 | drivers/sound/mpu401.c | if (ctrl < 32) |
ctrl | 187 | drivers/sound/mpu401.c | devc->controls[ctrl] = (msg[2] & 0x7f) << 7; |
ctrl | 191 | drivers/sound/mpu401.c | ctrl -= 32; |
ctrl | 192 | drivers/sound/mpu401.c | devc->controls[ctrl] = |
ctrl | 193 | drivers/sound/mpu401.c | (devc->controls[ctrl] & ~0x7f) | (msg[2] & 0x7f); |
ctrl | 196 | drivers/sound/mpu401.c | msg[1], devc->controls[ctrl])); |
ctrl | 56 | drivers/sound/pas2_midi.c | unsigned char ctrl; |
ctrl | 80 | drivers/sound/pas2_midi.c | ctrl = 0; |
ctrl | 86 | drivers/sound/pas2_midi.c | ctrl |= M_C_ENA_INPUT_IRQ;/* |
ctrl | 94 | drivers/sound/pas2_midi.c | ctrl |= M_C_ENA_OUTPUT_IRQ | /* |
ctrl | 100 | drivers/sound/pas2_midi.c | pas_write (ctrl, |
ctrl | 232 | include/linux/scc.h | io_port ctrl; /* I/O address of CONTROL register */ |