tag | line | file | source code |
TRACEx1 | 82 | drivers/char/ftape/calibr.c | TRACEx1(4, "inb() duration: %d nsec", timediff(t0, t1)); |
TRACEx1 | 342 | drivers/char/ftape/ecc.c | TRACEx1(1, "Error: size of long is %d bytes", (int) sizeof(long)); |
TRACEx1 | 544 | drivers/char/ftape/ecc.c | TRACEx1(1, "Error: long is of size %d", (int) sizeof(long)); |
TRACEx1 | 381 | drivers/char/ftape/fdc-io.c | TRACEx1(4, "turning motor %d on", unit); |
TRACEx1 | 383 | drivers/char/ftape/fdc-io.c | TRACEx1(4, "turning motor %d off", unit); |
TRACEx1 | 661 | drivers/char/ftape/fdc-io.c | TRACEx1(4, "destination was: %d, resetting FDC...", track); |
TRACEx1 | 949 | drivers/char/ftape/fdc-io.c | TRACEx1(-1, "FDC lock command failed, stat = 0x%02x", stat); |
TRACEx1 | 1138 | drivers/char/ftape/fdc-io.c | TRACEx1(2, "FC-%c0 controller found", '0' + fc_type); |
TRACEx1 | 1190 | drivers/char/ftape/fdc-io.c | TRACEx1(-1, "Unable to grab IRQ%d for ftape driver", fdc.irq); |
TRACEx1 | 1195 | drivers/char/ftape/fdc-io.c | TRACEx1(-1, "Unable to grab DMA%d for ftape driver", fdc.dma); |
TRACEx1 | 124 | drivers/char/ftape/fdc-isr.c | TRACEx1(fdc_mode == fdc_reading_id ? 6 : 5, |
TRACEx1 | 129 | drivers/char/ftape/fdc-isr.c | TRACEx1(5, "abnormal completion %s", *fdc_mode_txt); |
TRACEx1 | 154 | drivers/char/ftape/fdc-isr.c | TRACEx1(5, "invalid completion %s", *fdc_mode_txt); |
TRACEx1 | 158 | drivers/char/ftape/fdc-isr.c | TRACEx1(5, "ready change %s", *fdc_mode_txt); |
TRACEx1 | 261 | drivers/char/ftape/fdc-isr.c | TRACEx1(4, "unexpected DMA residue: 0x%04x", dma_residue); |
TRACEx1 | 263 | drivers/char/ftape/fdc-isr.c | TRACEx1(6, "DMA residue = 0x%04x", dma_residue); |
TRACEx1 | 278 | drivers/char/ftape/fdc-isr.c | TRACEx1(5, "%d Sector(s) transferred", buff->sector_count); |
TRACEx1 | 280 | drivers/char/ftape/fdc-isr.c | TRACEx1(5, "Sector %d not found", SECTOR(buff->sector_offset)); |
TRACEx1 | 283 | drivers/char/ftape/fdc-isr.c | TRACEx1(5, "Error in sector %d", SECTOR(buff->sector_offset)); |
TRACEx1 | 289 | drivers/char/ftape/fdc-isr.c | TRACEx1(4, "Unexpected error at sector %d", SECTOR(buff->sector_offset)); |
TRACEx1 | 341 | drivers/char/ftape/fdc-isr.c | TRACEx1(4, "qic-pause failed, status = %d", result); |
TRACEx1 | 366 | drivers/char/ftape/fdc-isr.c | TRACEx1(4, "qic-stop failed, status = %d", result); |
TRACEx1 | 439 | drivers/char/ftape/fdc-isr.c | TRACEx1(1, "couldn't start %s-ahead", (write) ? "write" : "read"); |
TRACEx1 | 447 | drivers/char/ftape/fdc-isr.c | TRACEx1(5, "all input buffers %s, pausing tape", |
TRACEx1 | 455 | drivers/char/ftape/fdc-isr.c | TRACEx1(5, "no %s allowed, stopping tape", |
TRACEx1 | 476 | drivers/char/ftape/fdc-isr.c | TRACEx1(4, "%s error, will retry", |
TRACEx1 | 501 | drivers/char/ftape/fdc-isr.c | TRACEx1(1, "bug: sector_offset = %d", buff->sector_offset); |
TRACEx1 | 513 | drivers/char/ftape/fdc-isr.c | TRACEx1(4, "at sector %d", SECTOR(i)); |
TRACEx1 | 521 | drivers/char/ftape/fdc-isr.c | TRACEx1(4, "after sector %d", SECTOR(i)); |
TRACEx1 | 586 | drivers/char/ftape/fdc-isr.c | TRACEx1(4, "aborting %s", fdc_mode_txt); |
TRACEx1 | 590 | drivers/char/ftape/fdc-isr.c | TRACEx1(5, "this is retry nr %d", buff->retry); |
TRACEx1 | 610 | drivers/char/ftape/fdc-isr.c | TRACEx1(2, "deleted data in sector %d", |
TRACEx1 | 698 | drivers/char/ftape/fdc-isr.c | TRACEx1(5, "aborting %s", fdc_mode_txt); |
TRACEx1 | 702 | drivers/char/ftape/fdc-isr.c | TRACEx1(5, "this is retry nr %d", buff->retry); |
TRACEx1 | 746 | drivers/char/ftape/fdc-isr.c | TRACEx1(1, "Warning: unexpected irq during: %s", |
TRACEx1 | 804 | drivers/char/ftape/fdc-isr.c | TRACEx1(5, "hiding interrupt while %s", wait_intr ? "waiting" : "active"); |
TRACEx1 | 808 | drivers/char/ftape/fdc-isr.c | TRACEx1(7, "isr() duration: %5d usec", t0); |
TRACEx1 | 214 | drivers/char/ftape/ftape-bsm.c | TRACEx1(6, "bad segment at sector: %6d", sector & 0x7fffff); |
TRACEx1 | 217 | drivers/char/ftape/ftape-bsm.c | TRACEx1(6, "bad sector: %6d", sector); |
TRACEx1 | 246 | drivers/char/ftape/ftape-bsm.c | TRACEx1(3, "%d Kb usable on this tape", |
TRACEx1 | 251 | drivers/char/ftape/ftape-bsm.c | TRACEx1(2, "%d bad sectors", total_bad); |
TRACEx1 | 261 | drivers/char/ftape/ftape-ctl.c | TRACEx1(2, "drive wakeup method: %s", |
TRACEx1 | 371 | drivers/char/ftape/ftape-ctl.c | TRACEx1(-1, " Vendor id : 0x%04x", drive_type.vendor_id); |
TRACEx1 | 372 | drivers/char/ftape/ftape-ctl.c | TRACEx1(-1, " Wakeup method : %s", methods[drive_type.wake_up].name); |
TRACEx1 | 380 | drivers/char/ftape/ftape-ctl.c | TRACEx1(3, "tape drive type: %s", drive_type.name); |
TRACEx1 | 456 | drivers/char/ftape/ftape-ctl.c | TRACEx1(-1, "drive : %s", drive_type.name); |
TRACEx1 | 458 | drivers/char/ftape/ftape-ctl.c | TRACEx1(-1, "has max tape speed of %d ips", drive_type.speed); |
TRACEx1 | 470 | drivers/char/ftape/ftape-ctl.c | TRACEx1(4, "seek timeout: %d sec", (timeout.seek + 500) / 1000); |
TRACEx1 | 471 | drivers/char/ftape/ftape-ctl.c | TRACEx1(4, "rewind timeout: %d sec", (timeout.rewind + 500) / 1000); |
TRACEx1 | 675 | drivers/char/ftape/ftape-ctl.c | TRACEx1(5, "called with ioctl command: 0x%08x", command); |
TRACEx1 | 682 | drivers/char/ftape/ftape-ctl.c | TRACEx1(5, "calling MTIOCTOP command: 0x%08x", krnl_arg.mtop.mt_op); |
TRACEx1 | 770 | drivers/char/ftape/ftape-ctl.c | TRACEx1(2, "tracing set to %d", tracing); |
TRACEx1 | 119 | drivers/char/ftape/ftape-eof.c | TRACEx1(4, "tape label = `%s'", label); |
TRACEx1 | 130 | drivers/char/ftape/ftape-eof.c | TRACEx1(4, "format version = %d", ftape_fmt_version); |
TRACEx1 | 284 | drivers/char/ftape/ftape-eof.c | TRACEx1(5, "segment out of range: %d", segment); |
TRACEx1 | 326 | drivers/char/ftape/ftape-eof.c | TRACEx1(5, "old label: `%s'", (char *) (buffer + 30)); |
TRACEx1 | 332 | drivers/char/ftape/ftape-eof.c | TRACEx1(5, "new label: `%s'", (char *) (buffer + 30)); |
TRACEx1 | 424 | drivers/char/ftape/ftape-eof.c | TRACEx1(-1, "new tape label = \"%s\"", &buffer[30]); |
TRACEx1 | 476 | drivers/char/ftape/ftape-eof.c | TRACEx1(5, "eom found at segment %d", eom); |
TRACEx1 | 496 | drivers/char/ftape/ftape-eof.c | TRACEx1(5, "tape positioned at segment %d", ftape_seg_pos); |
TRACEx1 | 529 | drivers/char/ftape/ftape-eof.c | TRACEx1(1, "seek reached %s of tape", |
TRACEx1 | 533 | drivers/char/ftape/ftape-eof.c | TRACEx1(5, "tape repositioned to segment %d", ftape_seg_pos); |
TRACEx1 | 168 | drivers/char/ftape/ftape-io.c | TRACEx1(1, "bug - recursion for command: %d", command); |
TRACEx1 | 173 | drivers/char/ftape/ftape-io.c | TRACEx1(5, "called with parameter = %d", command - 2); |
TRACEx1 | 177 | drivers/char/ftape/ftape-io.c | TRACEx1(-1, "bug - bad command: %d", command); |
TRACEx1 | 189 | drivers/char/ftape/ftape-io.c | TRACEx1(5, "%s", qic117_cmds[command].name); |
TRACEx1 | 219 | drivers/char/ftape/ftape-io.c | TRACEx1(4, "command %d issued while not ready", command); |
TRACEx1 | 235 | drivers/char/ftape/ftape-io.c | TRACEx1(4, "command %d issued while error pending", command); |
TRACEx1 | 555 | drivers/char/ftape/ftape-io.c | TRACEx1(-1, "%sFatal ERROR:", |
TRACEx1 | 557 | drivers/char/ftape/ftape-io.c | TRACEx1(-1, "%s ...", ftape_errors[*error].message); |
TRACEx1 | 563 | drivers/char/ftape/ftape-io.c | TRACEx1(-1, "... caused by command \'%s\'", |
TRACEx1 | 614 | drivers/char/ftape/ftape-io.c | TRACEx1(8, "report tape status result = %02x", status); |
TRACEx1 | 714 | drivers/char/ftape/ftape-io.c | TRACEx1(4, "got old 8 bit id: %04x", *id); |
TRACEx1 | 718 | drivers/char/ftape/ftape-io.c | TRACEx1(4, "got 8 bit id: %04x", *id); |
TRACEx1 | 722 | drivers/char/ftape/ftape-io.c | TRACEx1(4, "got 16 bit id: %04x", *id); |
TRACEx1 | 734 | drivers/char/ftape/ftape-io.c | TRACEx1(4, "CMS rom version: %d", version); |
TRACEx1 | 746 | drivers/char/ftape/ftape-io.c | TRACEx1(4, "CMS signature: %02x", sign); |
TRACEx1 | 760 | drivers/char/ftape/ftape-io.c | TRACEx1(4, "CMS status: %d", sign); |
TRACEx1 | 798 | drivers/char/ftape/ftape-io.c | TRACEx1(4, "Select Rate command is%s supported", |
TRACEx1 | 818 | drivers/char/ftape/ftape-io.c | TRACEx1(4, "%sb/s data rate not supported by the fdc", |
TRACEx1 | 846 | drivers/char/ftape/ftape-io.c | TRACEx1(4, "could not set %sb/s data rate", rates[new_rate].text); |
TRACEx1 | 854 | drivers/char/ftape/ftape-io.c | TRACEx1(2, "unknown length QIC-%s tape", |
TRACEx1 | 905 | drivers/char/ftape/ftape-io.c | TRACEx1(5, "seeking track %d", track); |
TRACEx1 | 83 | drivers/char/ftape/ftape-read.c | TRACEx1(5, "bad_map = 0x%08lx", bad_map); |
TRACEx1 | 84 | drivers/char/ftape/ftape-read.c | TRACEx1(5, "src_map = 0x%08lx", src_map); |
TRACEx1 | 103 | drivers/char/ftape/ftape-read.c | TRACEx1(5, "dst_map = 0x%08lx", dst_map); |
TRACEx1 | 344 | drivers/char/ftape/ftape-read.c | TRACEx1(1, "Error: segment %d unreachable", segment_id); |
TRACEx1 | 489 | drivers/char/ftape/ftape-read.c | TRACEx1(1, "calculated tape length is %d ft", tape_len); |
TRACEx1 | 633 | drivers/char/ftape/ftape-read.c | TRACEx1(4, "read_segment result: %d", result); |
TRACEx1 | 655 | drivers/char/ftape/ftape-read.c | TRACEx1(1, "verify_area failed, exitcode = %d", result); |
TRACEx1 | 129 | drivers/char/ftape/ftape-rw.c | TRACEx1(5, "data offset = %d sectors", buff->data_offset); |
TRACEx1 | 140 | drivers/char/ftape/ftape-rw.c | TRACEx1(5, "segment: %d", buff->segment_id); |
TRACEx1 | 195 | drivers/char/ftape/ftape-rw.c | TRACEx1(5, "setting up for retry nr %d", buff->retry); |
TRACEx1 | 200 | drivers/char/ftape/ftape-rw.c | TRACEx1(5, "skipping %d sectors", offset); |
TRACEx1 | 252 | drivers/char/ftape/ftape-rw.c | TRACEx1(5, "tape at logical %s", location.bot ? "bot" : "eot"); |
TRACEx1 | 253 | drivers/char/ftape/ftape-rw.c | TRACEx1(5, "segment = %d", location.segment); |
TRACEx1 | 485 | drivers/char/ftape/ftape-rw.c | TRACEx1(5, "warning: zero or negative count: %d", count); |
TRACEx1 | 497 | drivers/char/ftape/ftape-rw.c | TRACEx1(4, "skipping %d segment(s)", count); |
TRACEx1 | 501 | drivers/char/ftape/ftape-rw.c | TRACEx1(4, "backing up %d segment(s)", count); |
TRACEx1 | 573 | drivers/char/ftape/ftape-rw.c | TRACEx1(5, "fast skipping %d segments", count); |
TRACEx1 | 594 | drivers/char/ftape/ftape-rw.c | TRACEx1(5, "read_id failed, retry (%d)", failures); |
TRACEx1 | 615 | drivers/char/ftape/ftape-rw.c | TRACEx1(4, "clipped overshoot to %d", overshoot); |
TRACEx1 | 622 | drivers/char/ftape/ftape-rw.c | TRACEx1(4, "missed segment %d while skipping", prev_segment + 1); |
TRACEx1 | 701 | drivers/char/ftape/ftape-rw.c | TRACEx1(4, "clipped min_rewind to %d", min_rewind); |
TRACEx1 | 713 | drivers/char/ftape/ftape-rw.c | TRACEx1(4, "clipped overshoot to %d", overshoot); |
TRACEx1 | 724 | drivers/char/ftape/ftape-rw.c | TRACEx1(5, "ftape_read_id failed, retry (%d)", failures); |
TRACEx1 | 815 | drivers/char/ftape/ftape-rw.c | TRACEx1(4, "tape stopped for unknown reason ! status = 0x%02x", |
TRACEx1 | 833 | drivers/char/ftape/ftape-rw.c | TRACEx1(5, "tape is positioned at segment %d", location.segment); |
TRACEx1 | 221 | drivers/char/ftape/ftape-write.c | TRACEx1(1, "warning: %d hard error(s) in written segment", |
TRACEx1 | 223 | drivers/char/ftape/ftape-write.c | TRACEx1(4, "hard_error_map = 0x%08lx", buffer[tail].hard_error_map); |
TRACEx1 | 320 | drivers/char/ftape/ftape-write.c | TRACEx1(2, "write error, retry %d", retry); |
TRACEx1 | 147 | drivers/char/ftape/kernel-interface.c | TRACEx1(3, "ftape_init @ 0x%p", ftape_init); |
TRACEx1 | 204 | drivers/char/ftape/kernel-interface.c | TRACEx1(3, "removed dma-buffer #%d", n); |
TRACEx1 | 206 | drivers/char/ftape/kernel-interface.c | TRACEx1(1, "dma-buffer #%d == NULL (bug?)", n); |