root/drivers/scsi/Config.in

/* */

comment 'SCSI support type (disk, tape, CDrom)'

dep_tristate 'SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
dep_tristate 'SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
dep_tristate 'SCSI CDROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
dep_tristate 'SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI

comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'

bool 'Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN

bool 'Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS

mainmenu_option next_comment
comment 'SCSI low-level drivers'

dep_tristate 'AdvanSys SCSI support' CONFIG_SCSI_ADVANSYS $CONFIG_SCSI
dep_tristate 'Adaptec AHA152X support' CONFIG_SCSI_AHA152X $CONFIG_SCSI
dep_tristate 'Adaptec AHA1542 support' CONFIG_SCSI_AHA1542 $CONFIG_SCSI
dep_tristate 'Adaptec AHA1740 support' CONFIG_SCSI_AHA1740 $CONFIG_SCSI
dep_tristate 'Adaptec AHA274X/284X/294X support' CONFIG_SCSI_AIC7XXX $CONFIG_SCSI
dep_tristate 'BusLogic SCSI support' CONFIG_SCSI_BUSLOGIC $CONFIG_SCSI
dep_tristate 'DTC3180/3280 SCSI support' CONFIG_SCSI_DTC3280 $CONFIG_SCSI
dep_tristate 'EATA-DMA (DPT, NEC, ATT, Olivetti) support' CONFIG_SCSI_EATA_DMA $CONFIG_SCSI
dep_tristate 'EATA-PIO (old DPT PM2001, PM2012A) support' CONFIG_SCSI_EATA_PIO $CONFIG_SCSI
dep_tristate 'UltraStor 14F/34F support' CONFIG_SCSI_U14_34F $CONFIG_SCSI
dep_tristate 'Future Domain 16xx SCSI support' CONFIG_SCSI_FUTURE_DOMAIN $CONFIG_SCSI
dep_tristate 'Generic NCR5380/53c400 SCSI support' CONFIG_SCSI_GENERIC_NCR5380 $CONFIG_SCSI
if [ "$CONFIG_SCSI_GENERIC_NCR5380" != "n" ]; then
        bool '   Enable NCR53c400 extensions' CONFIG_SCSI_GENERIC_NCR53C400
        choice 'NCR5380/53c400 mapping method (use Port for T130B)' \
                "Port CONFIG_SCSI_G_NCR5380_PORT \
                Memory CONFIG_SCSI_G_NCR5380_MEM" Port
fi
if [ "$CONFIG_PCI" = "y" ]; then
  dep_tristate 'NCR53c7,8xx SCSI support'  CONFIG_SCSI_NCR53C7xx $CONFIG_SCSI
  if [ "$CONFIG_SCSI_NCR53C7xx" != "n" ]; then
    bool '   always negotiate synchronous transfers' CONFIG_SCSI_NCR53C7xx_sync
    bool '   allow FAST-SCSI [10MHz]' CONFIG_SCSI_NCR53C7xx_FAST
    bool '   allow DISCONNECT' CONFIG_SCSI_NCR53C7xx_DISCONNECT
  fi
fi
dep_tristate 'Always IN2000 SCSI support (test release)' CONFIG_SCSI_IN2000 $CONFIG_SCSI
dep_tristate 'PAS16 SCSI support' CONFIG_SCSI_PAS16 $CONFIG_SCSI
dep_tristate 'QLOGIC SCSI support' CONFIG_SCSI_QLOGIC $CONFIG_SCSI
dep_tristate 'Seagate ST-02 and Future Domain TMC-8xx SCSI support' CONFIG_SCSI_SEAGATE $CONFIG_SCSI
dep_tristate 'Trantor T128/T128F/T228 SCSI support' CONFIG_SCSI_T128 $CONFIG_SCSI
dep_tristate 'UltraStor SCSI support' CONFIG_SCSI_ULTRASTOR $CONFIG_SCSI
dep_tristate '7000FASST SCSI support' CONFIG_SCSI_7000FASST $CONFIG_SCSI
dep_tristate 'EATA ISA/EISA (DPT PM2011/021/012/022/122/322) support' CONFIG_SCSI_EATA $CONFIG_SCSI
dep_tristate 'NCR53c406a SCSI support' CONFIG_SCSI_NCR53C406A $CONFIG_SCSI
dep_tristate 'IOMEGA Parallel Port ZIP drive SCSI support' CONFIG_SCSI_PPA $CONFIG_SCSI
bool 'AM53/79C974 PCI SCSI support' CONFIG_SCSI_AM53C974
#dep_tristate 'SCSI debugging host adapter' CONFIG_SCSI_DEBUG $CONFIG_SCSI
endmenu

/* */