root/arch/m68k/fpsp040/x_operr.S

/* [previous][next][first][last][top][bottom][index][help] */
   1 |
   2 |       x_operr.sa 3.5 7/1/91
   3 |
   4 |       fpsp_operr --- FPSP handler for operand error exception
   5 |
   6 |       See 68040 User's Manual pp. 9-44f
   7 |
   8 | Note 1: For trap disabled 040 does the following:
   9 | If the dest is a fp reg, then an extended precision non_signaling
  10 | NAN is stored in the dest reg.  If the dest format is b, w, or l and
  11 | the source op is a NAN, then garbage is stored as the result (actually
  12 | the upper 32 bits of the mantissa are sent to the integer unit). If
  13 | the dest format is integer (b, w, l) and the operr is caused by
  14 | integer overflow, or the source op is inf, then the result stored is
  15 | garbage.
  16 | There are three cases in which operr is incorrectly signaled on the 
  17 | 040.  This occurs for move_out of format b, w, or l for the largest 
  18 | negative integer (-2^7 for b, -2^15 for w, -2^31 for l).
  19 |
  20 |         On opclass = 011 fmove.(b,w,l) that causes a conversion
  21 |         overflow -> OPERR, the exponent in wbte (and fpte) is:
  22 |               byte    56 - (62 - exp)
  23 |               word    48 - (62 - exp)
  24 |               long    32 - (62 - exp)
  25 |
  26 |                       where exp = (true exp) - 1
  27 |
  28 |  So, wbtemp and fptemp will contain the following on erroneously
  29 |         signalled operr:
  30 |                       fpts = 1
  31 |                       fpte = $4000  (15 bit externally)
  32 |               byte    fptm = $ffffffff ffffff80
  33 |               word    fptm = $ffffffff ffff8000
  34 |               long    fptm = $ffffffff 80000000
  35 |
  36 | Note 2: For trap enabled 040 does the following:
  37 | If the inst is move_out, then same as Note 1.
  38 | If the inst is not move_out, the dest is not modified.
  39 | The exceptional operand is not defined for integer overflow 
  40 | during a move_out.
  41 |
  42 
  43 |               Copyright (C) Motorola, Inc. 1990
  44 |                       All Rights Reserved
  45 |
  46 |       THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA 
  47 |       The copyright notice above does not evidence any  
  48 |       actual or intended publication of such source code.
  49 
  50 X_OPERR:        |idnt    2,1 | Motorola 040 Floating Point Software Package
  51 
  52         |section        8
  53 
  54         .include "fpsp.h"
  55 
  56         |xref   mem_write
  57         |xref   real_operr
  58         |xref   real_inex
  59         |xref   get_fline
  60         |xref   fpsp_done
  61         |xref   reg_dest
  62 
  63         .global fpsp_operr
  64 fpsp_operr:
  65 |
  66         link            %a6,#-LOCAL_SIZE
  67         fsave           -(%a7)
  68         moveml          %d0-%d1/%a0-%a1,USER_DA(%a6)
  69         fmovemx %fp0-%fp3,USER_FP0(%a6)
  70         fmoveml %fpcr/%fpsr/%fpiar,USER_FPCR(%a6)
  71 
  72 |
  73 | Check if this is an opclass 3 instruction.
  74 |  If so, fall through, else branch to operr_end
  75 |
  76         btstb   #TFLAG,T_BYTE(%a6)
  77         beqs    operr_end
  78 
  79 |
  80 | If the destination size is B,W,or L, the operr must be 
  81 | handled here.
  82 |
  83         movel   CMDREG1B(%a6),%d0
  84         bfextu  %d0{#3:#3},%d0  |0=long, 4=word, 6=byte
  85         cmpib   #0,%d0          |determine size; check long
  86         beq     operr_long
  87         cmpib   #4,%d0          |check word
  88         beq     operr_word
  89         cmpib   #6,%d0          |check byte
  90         beq     operr_byte
  91 
  92 |
  93 | The size is not B,W,or L, so the operr is handled by the 
  94 | kernel handler.  Set the operr bits and clean up, leaving
  95 | only the integer exception frame on the stack, and the 
  96 | fpu in the original exceptional state.
  97 |
  98 operr_end:
  99         bsetb           #operr_bit,FPSR_EXCEPT(%a6)
 100         bsetb           #aiop_bit,FPSR_AEXCEPT(%a6)
 101 
 102         moveml          USER_DA(%a6),%d0-%d1/%a0-%a1
 103         fmovemx USER_FP0(%a6),%fp0-%fp3
 104         fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
 105         frestore        (%a7)+
 106         unlk            %a6
 107         bral            real_operr
 108 
 109 operr_long:
 110         moveql  #4,%d1          |write size to d1
 111         moveb   STAG(%a6),%d0   |test stag for nan
 112         andib   #0xe0,%d0               |clr all but tag
 113         cmpib   #0x60,%d0               |check for nan
 114         beq     operr_nan       
 115         cmpil   #0x80000000,FPTEMP_LO(%a6) |test if ls lword is special
 116         bnes    chklerr         |if not equal, check for incorrect operr
 117         bsr     check_upper     |check if exp and ms mant are special
 118         tstl    %d0
 119         bnes    chklerr         |if d0 is true, check for incorrect operr
 120         movel   #0x80000000,%d0 |store special case result
 121         bsr     operr_store
 122         bra     not_enabled     |clean and exit
 123 |
 124 |       CHECK FOR INCORRECTLY GENERATED OPERR EXCEPTION HERE
 125 |
 126 chklerr:
 127         movew   FPTEMP_EX(%a6),%d0
 128         andw    #0x7FFF,%d0     |ignore sign bit
 129         cmpw    #0x3FFE,%d0     |this is the only possible exponent value
 130         bnes    chklerr2
 131 fixlong:
 132         movel   FPTEMP_LO(%a6),%d0
 133         bsr     operr_store
 134         bra     not_enabled
 135 chklerr2:
 136         movew   FPTEMP_EX(%a6),%d0
 137         andw    #0x7FFF,%d0     |ignore sign bit
 138         cmpw    #0x4000,%d0
 139         bcc     store_max       |exponent out of range
 140 
 141         movel   FPTEMP_LO(%a6),%d0
 142         andl    #0x7FFF0000,%d0 |look for all 1's on bits 30-16
 143         cmpl    #0x7FFF0000,%d0
 144         beqs    fixlong
 145 
 146         tstl    FPTEMP_LO(%a6)
 147         bpls    chklepos
 148         cmpl    #0xFFFFFFFF,FPTEMP_HI(%a6)
 149         beqs    fixlong
 150         bra     store_max
 151 chklepos:
 152         tstl    FPTEMP_HI(%a6)
 153         beqs    fixlong
 154         bra     store_max
 155 
 156 operr_word:
 157         moveql  #2,%d1          |write size to d1
 158         moveb   STAG(%a6),%d0   |test stag for nan
 159         andib   #0xe0,%d0               |clr all but tag
 160         cmpib   #0x60,%d0               |check for nan
 161         beq     operr_nan       
 162         cmpil   #0xffff8000,FPTEMP_LO(%a6) |test if ls lword is special
 163         bnes    chkwerr         |if not equal, check for incorrect operr
 164         bsr     check_upper     |check if exp and ms mant are special
 165         tstl    %d0
 166         bnes    chkwerr         |if d0 is true, check for incorrect operr
 167         movel   #0x80000000,%d0 |store special case result
 168         bsr     operr_store
 169         bra     not_enabled     |clean and exit
 170 |
 171 |       CHECK FOR INCORRECTLY GENERATED OPERR EXCEPTION HERE
 172 |
 173 chkwerr:
 174         movew   FPTEMP_EX(%a6),%d0
 175         andw    #0x7FFF,%d0     |ignore sign bit
 176         cmpw    #0x3FFE,%d0     |this is the only possible exponent value
 177         bnes    store_max
 178         movel   FPTEMP_LO(%a6),%d0
 179         swap    %d0
 180         bsr     operr_store
 181         bra     not_enabled
 182 
 183 operr_byte:
 184         moveql  #1,%d1          |write size to d1
 185         moveb   STAG(%a6),%d0   |test stag for nan
 186         andib   #0xe0,%d0               |clr all but tag
 187         cmpib   #0x60,%d0               |check for nan
 188         beqs    operr_nan       
 189         cmpil   #0xffffff80,FPTEMP_LO(%a6) |test if ls lword is special
 190         bnes    chkberr         |if not equal, check for incorrect operr
 191         bsr     check_upper     |check if exp and ms mant are special
 192         tstl    %d0
 193         bnes    chkberr         |if d0 is true, check for incorrect operr
 194         movel   #0x80000000,%d0 |store special case result
 195         bsr     operr_store
 196         bra     not_enabled     |clean and exit
 197 |
 198 |       CHECK FOR INCORRECTLY GENERATED OPERR EXCEPTION HERE
 199 |
 200 chkberr:
 201         movew   FPTEMP_EX(%a6),%d0
 202         andw    #0x7FFF,%d0     |ignore sign bit
 203         cmpw    #0x3FFE,%d0     |this is the only possible exponent value
 204         bnes    store_max
 205         movel   FPTEMP_LO(%a6),%d0
 206         asll    #8,%d0
 207         swap    %d0
 208         bsr     operr_store
 209         bra     not_enabled
 210 
 211 |
 212 | This operr condition is not of the special case.  Set operr
 213 | and aiop and write the portion of the nan to memory for the
 214 | given size.
 215 |
 216 operr_nan:
 217         orl     #opaop_mask,USER_FPSR(%a6) |set operr & aiop
 218 
 219         movel   ETEMP_HI(%a6),%d0       |output will be from upper 32 bits
 220         bsr     operr_store
 221         bra     end_operr
 222 |
 223 | Store_max loads the max pos or negative for the size, sets
 224 | the operr and aiop bits, and clears inex and ainex, incorrectly
 225 | set by the 040.
 226 |
 227 store_max:
 228         orl     #opaop_mask,USER_FPSR(%a6) |set operr & aiop
 229         bclrb   #inex2_bit,FPSR_EXCEPT(%a6)
 230         bclrb   #ainex_bit,FPSR_AEXCEPT(%a6)
 231         fmovel  #0,%FPSR
 232         
 233         tstw    FPTEMP_EX(%a6)  |check sign
 234         blts    load_neg
 235         movel   #0x7fffffff,%d0
 236         bsr     operr_store
 237         bra     end_operr
 238 load_neg:
 239         movel   #0x80000000,%d0
 240         bsr     operr_store
 241         bra     end_operr
 242 
 243 |
 244 | This routine stores the data in d0, for the given size in d1,
 245 | to memory or data register as required.  A read of the fline
 246 | is required to determine the destination.
 247 |
 248 operr_store:
 249         movel   %d0,L_SCR1(%a6) |move write data to L_SCR1
 250         movel   %d1,-(%a7)      |save register size
 251         bsrl    get_fline       |fline returned in d0
 252         movel   (%a7)+,%d1
 253         bftst   %d0{#26:#3}             |if mode is zero, dest is Dn
 254         bnes    dest_mem
 255 |
 256 | Destination is Dn.  Get register number from d0. Data is on
 257 | the stack at (a7). D1 has size: 1=byte,2=word,4=long/single
 258 |
 259         andil   #7,%d0          |isolate register number
 260         cmpil   #4,%d1
 261         beqs    op_long         |the most frequent case
 262         cmpil   #2,%d1
 263         bnes    op_con
 264         orl     #8,%d0
 265         bras    op_con
 266 op_long:
 267         orl     #0x10,%d0
 268 op_con:
 269         movel   %d0,%d1         |format size:reg for reg_dest
 270         bral    reg_dest        |call to reg_dest returns to caller
 271 |                               ;of operr_store
 272 |
 273 | Destination is memory.  Get <ea> from integer exception frame
 274 | and call mem_write.
 275 |
 276 dest_mem:
 277         leal    L_SCR1(%a6),%a0 |put ptr to write data in a0
 278         movel   EXC_EA(%a6),%a1 |put user destination address in a1
 279         movel   %d1,%d0         |put size in d0
 280         bsrl    mem_write
 281         rts
 282 |
 283 | Check the exponent for $c000 and the upper 32 bits of the 
 284 | mantissa for $ffffffff.  If both are true, return d0 clr
 285 | and store the lower n bits of the least lword of FPTEMP
 286 | to d0 for write out.  If not, it is a real operr, and set d0.
 287 |
 288 check_upper:
 289         cmpil   #0xffffffff,FPTEMP_HI(%a6) |check if first byte is all 1's
 290         bnes    true_operr      |if not all 1's then was true operr
 291         cmpiw   #0xc000,FPTEMP_EX(%a6) |check if incorrectly signalled
 292         beqs    not_true_operr  |branch if not true operr
 293         cmpiw   #0xbfff,FPTEMP_EX(%a6) |check if incorrectly signalled
 294         beqs    not_true_operr  |branch if not true operr
 295 true_operr:
 296         movel   #1,%d0          |signal real operr
 297         rts
 298 not_true_operr:
 299         clrl    %d0             |signal no real operr
 300         rts
 301 
 302 |
 303 | End_operr tests for operr enabled.  If not, it cleans up the stack
 304 | and does an rte.  If enabled, it cleans up the stack and branches
 305 | to the kernel operr handler with only the integer exception
 306 | frame on the stack and the fpu in the original exceptional state
 307 | with correct data written to the destination.
 308 |
 309 end_operr:
 310         btstb           #operr_bit,FPCR_ENABLE(%a6)
 311         beqs            not_enabled
 312 enabled:
 313         moveml          USER_DA(%a6),%d0-%d1/%a0-%a1
 314         fmovemx USER_FP0(%a6),%fp0-%fp3
 315         fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
 316         frestore        (%a7)+
 317         unlk            %a6
 318         bral            real_operr
 319 
 320 not_enabled:
 321 |
 322 | It is possible to have either inex2 or inex1 exceptions with the
 323 | operr.  If the inex enable bit is set in the FPCR, and either
 324 | inex2 or inex1 occurred, we must clean up and branch to the
 325 | real inex handler.
 326 |
 327 ck_inex:
 328         moveb   FPCR_ENABLE(%a6),%d0
 329         andb    FPSR_EXCEPT(%a6),%d0
 330         andib   #0x3,%d0
 331         beq     operr_exit
 332 |
 333 | Inexact enabled and reported, and we must take an inexact exception.
 334 |
 335 take_inex:
 336         moveb           #INEX_VEC,EXC_VEC+1(%a6)
 337         movel           USER_FPSR(%a6),FPSR_SHADOW(%a6)
 338         orl             #sx_mask,E_BYTE(%a6)
 339         moveml          USER_DA(%a6),%d0-%d1/%a0-%a1
 340         fmovemx USER_FP0(%a6),%fp0-%fp3
 341         fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
 342         frestore        (%a7)+
 343         unlk            %a6
 344         bral            real_inex
 345 |
 346 | Since operr is only an E1 exception, there is no need to frestore
 347 | any state back to the fpu.
 348 |
 349 operr_exit:
 350         moveml          USER_DA(%a6),%d0-%d1/%a0-%a1
 351         fmovemx USER_FP0(%a6),%fp0-%fp3
 352         fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
 353         unlk            %a6
 354         bral            fpsp_done
 355 
 356         |end

/* [previous][next][first][last][top][bottom][index][help] */