tag | line | file | source code |
DPRINT | 541 | drivers/block/ataflop.c | DPRINT(( "wpstat[%d] = %d\n", drive, stat )); |
DPRINT | 586 | drivers/block/ataflop.c | DPRINT(("FDC irq, status = %02x handler = %08lx\n",status,(unsigned long)handler)); |
DPRINT | 590 | drivers/block/ataflop.c | DPRINT(("FDC irq, no handler\n")); |
DPRINT | 642 | drivers/block/ataflop.c | DPRINT(("do_format( dr=%d tr=%d he=%d offs=%d )\n", |
DPRINT | 721 | drivers/block/ataflop.c | DPRINT(("do_fd_action\n")); |
DPRINT | 775 | drivers/block/ataflop.c | DPRINT(("fd_calibrate\n")); |
DPRINT | 789 | drivers/block/ataflop.c | DPRINT(("fd_calibrate_done()\n")); |
DPRINT | 822 | drivers/block/ataflop.c | DPRINT(("fd_seek() to track %d\n",ReqTrack)); |
DPRINT | 837 | drivers/block/ataflop.c | DPRINT(("fd_seek_done()\n")); |
DPRINT | 874 | drivers/block/ataflop.c | DPRINT(("fd_rwsec(), Sec=%d, Access=%c\n",ReqSector, ReqCmd == WRITE ? 'w' : 'r' )); |
DPRINT | 1007 | drivers/block/ataflop.c | DPRINT(("fd_readtrack_check(): done\n")); |
DPRINT | 1019 | drivers/block/ataflop.c | DPRINT(("fd_readtrack_check(): not yet finished\n")); |
DPRINT | 1030 | drivers/block/ataflop.c | DPRINT(("fd_rwsec_done()\n")); |
DPRINT | 1155 | drivers/block/ataflop.c | DPRINT(("fd_writetrack() Tr=%d Si=%d\n", ReqTrack, ReqSide )); |
DPRINT | 1212 | drivers/block/ataflop.c | DPRINT(("fd_writetrack_done()\n")); |
DPRINT | 1267 | drivers/block/ataflop.c | DPRINT(("finish_fdc: dummy seek started\n")); |
DPRINT | 1284 | drivers/block/ataflop.c | DPRINT(("finish_fdc_done entered\n")); |
DPRINT | 1306 | drivers/block/ataflop.c | DPRINT(("finish_fdc() finished\n")); |
DPRINT | 1412 | drivers/block/ataflop.c | DPRINT(("Request params: Si=%d Tr=%d Se=%d Data=%08lx\n",ReqSide, |
DPRINT | 1421 | drivers/block/ataflop.c | DPRINT(("redo_fd_request: CURRENT=%08lx CURRENT->dev=%04x CURRENT->sector=%ld\n", |
DPRINT | 1505 | drivers/block/ataflop.c | DPRINT(("do_fd_request for pid %d\n",current->pid)); |
DPRINT | 1757 | drivers/block/ataflop.c | DPRINT (("Weird, open called with filp=0\n")); |
DPRINT | 1763 | drivers/block/ataflop.c | DPRINT(("fd_open: type=%d\n",type)); |
DPRINT | 622 | drivers/block/floppy.c | DPRINT("reschedule timeout "); |
DPRINT | 686 | drivers/block/floppy.c | DPRINT("WARNING disk change called early\n"); |
DPRINT | 690 | drivers/block/floppy.c | DPRINT("probing disk change on unselected drive\n"); |
DPRINT | 716 | drivers/block/floppy.c | DPRINT("Disk type is undefined after " |
DPRINT | 751 | drivers/block/floppy.c | DPRINT("calling disk change from set_dor\n"); |
DPRINT | 850 | drivers/block/floppy.c | DPRINT("FDC access conflict!\n"); |
DPRINT | 939 | drivers/block/floppy.c | DPRINT("calling disk change from watchdog\n"); |
DPRINT | 944 | drivers/block/floppy.c | DPRINT("disk removed during i/o\n"); |
DPRINT | 1159 | drivers/block/floppy.c | DPRINT("Invalid data rate for perpendicular mode!\n"); |
DPRINT | 1176 | drivers/block/floppy.c | DPRINT("perpendicular mode not supported by this FDC.\n"); |
DPRINT | 1341 | drivers/block/floppy.c | DPRINT("-- FDC reply error"); |
DPRINT | 1353 | drivers/block/floppy.c | DPRINT("Drive is write protected\n"); |
DPRINT | 1361 | drivers/block/floppy.c | DPRINT("Over/Underrun - retrying\n"); |
DPRINT | 1364 | drivers/block/floppy.c | DPRINT(""); |
DPRINT | 1395 | drivers/block/floppy.c | DPRINT("Invalid FDC command given!\n"); |
DPRINT | 1399 | drivers/block/floppy.c | DPRINT("Abnormal termination caused by polling\n"); |
DPRINT | 1477 | drivers/block/floppy.c | DPRINT("seek failed\n"); |
DPRINT | 1486 | drivers/block/floppy.c | DPRINT("clearing NEWCHANGE flag because of effective seek\n"); |
DPRINT | 1511 | drivers/block/floppy.c | DPRINT("checking whether disk is write protected\n"); |
DPRINT | 1530 | drivers/block/floppy.c | DPRINT("calling disk change from seek\n"); |
DPRINT | 1625 | drivers/block/floppy.c | DPRINT("clearing NEWCHANGE flag because of second recalibrate\n"); |
DPRINT | 1660 | drivers/block/floppy.c | DPRINT("unexpected interrupt\n"); |
DPRINT | 1832 | drivers/block/floppy.c | DPRINT("floppy timeout\n"); |
DPRINT | 1882 | drivers/block/floppy.c | DPRINT("calling disk change from floppy_ready\n"); |
DPRINT | 1907 | drivers/block/floppy.c | DPRINT("setting NEWCHANGE in floppy_start\n"); |
DPRINT | 2185 | drivers/block/floppy.c | DPRINT("request list destroyed in floppy request done\n"); |
DPRINT | 2215 | drivers/block/floppy.c | DPRINT("request list destroyed in floppy request done\n"); |
DPRINT | 2367 | drivers/block/floppy.c | DPRINT("in copy buffer\n"); |
DPRINT | 2422 | drivers/block/floppy.c | DPRINT("bh=null in copy buffer after copy\n"); |
DPRINT | 2466 | drivers/block/floppy.c | DPRINT("make_raw_rw_request: unknown command\n"); |
DPRINT | 2584 | drivers/block/floppy.c | DPRINT("zero dma transfer attempted from make_raw_request\n"); |
DPRINT | 2620 | drivers/block/floppy.c | DPRINT("internal error offset !=0 on write\n"); |
DPRINT | 2666 | drivers/block/floppy.c | DPRINT("buffer overrun in schedule dma\n"); |
DPRINT | 2680 | drivers/block/floppy.c | DPRINT("buffer overrun in direct transfer\n"); |
DPRINT | 2683 | drivers/block/floppy.c | DPRINT("more sectors than bytes\n"); |
DPRINT | 2688 | drivers/block/floppy.c | DPRINT("zero dma transfer attempted from make_raw_request\n"); |
DPRINT | 2732 | drivers/block/floppy.c | DPRINT("disk absent or changed during operation\n"); |
DPRINT | 2739 | drivers/block/floppy.c | DPRINT("no autodetectable formats\n"); |
DPRINT | 2812 | drivers/block/floppy.c | DPRINT("setting NEWCHANGE in poll_drive\n"); |
DPRINT | 3108 | drivers/block/floppy.c | DPRINT("calling disk change from raw_cmd ioctl\n"); |
DPRINT | 3312 | drivers/block/floppy.c | DPRINT("obsolete eject ioctl\n"); |
DPRINT | 3313 | drivers/block/floppy.c | DPRINT("please use floppycontrol --eject\n"); |
DPRINT | 3547 | drivers/block/floppy.c | DPRINT("floppy_release with fd_ref == 0"); |
DPRINT | 3568 | drivers/block/floppy.c | DPRINT("Weird, open called with filp=0\n"); |
DPRINT | 3616 | drivers/block/floppy.c | DPRINT("Unable to allocate DMA memory\n"); |
DPRINT | 3666 | drivers/block/floppy.c | DPRINT("check_floppy_change: not a floppy\n"); |
DPRINT | 3863 | drivers/block/floppy.c | DPRINT("Configuring drives for inverted dcl\n"); |
DPRINT | 3887 | drivers/block/floppy.c | DPRINT("wrong number of parameter for cmos\n"); |
DPRINT | 3892 | drivers/block/floppy.c | DPRINT("bad drive for set_cmos\n"); |
DPRINT | 3961 | drivers/block/floppy.c | DPRINT("allowed options are:"); |
DPRINT | 3966 | drivers/block/floppy.c | DPRINT("botched floppy option\n"); |
DPRINT | 3967 | drivers/block/floppy.c | DPRINT("Read linux/drivers/block/README.fd\n"); |
DPRINT | 4068 | drivers/block/floppy.c | DPRINT("no floppy controllers found\n"); |