taglinefilesource code
printk300boot/head.Scall _printk
printk45drivers/FPU-emu/errors.cprintk("Unimplemented FPU Opcode at eip=%p : %02x ",
printk49drivers/FPU-emu/errors.cprintk("%02x (%02x+%d)\n", FPU_modrm, FPU_modrm & 0xf8, FPU_modrm & 7);
printk51drivers/FPU-emu/errors.cprintk("/%d\n", (FPU_modrm >> 3) & 7);
printk74drivers/FPU-emu/errors.cif ( partial_status & SW_Backward )    printk("SW: backward compatibility\n");
printk75drivers/FPU-emu/errors.cif ( partial_status & SW_C3 )          printk("SW: condition bit 3\n");
printk76drivers/FPU-emu/errors.cif ( partial_status & SW_C2 )          printk("SW: condition bit 2\n");
printk77drivers/FPU-emu/errors.cif ( partial_status & SW_C1 )          printk("SW: condition bit 1\n");
printk78drivers/FPU-emu/errors.cif ( partial_status & SW_C0 )          printk("SW: condition bit 0\n");
printk79drivers/FPU-emu/errors.cif ( partial_status & SW_Summary )     printk("SW: exception summary\n");
printk80drivers/FPU-emu/errors.cif ( partial_status & SW_Stack_Fault ) printk("SW: stack fault\n");
printk81drivers/FPU-emu/errors.cif ( partial_status & SW_Precision )   printk("SW: loss of precision\n");
printk82drivers/FPU-emu/errors.cif ( partial_status & SW_Underflow )   printk("SW: underflow\n");
printk83drivers/FPU-emu/errors.cif ( partial_status & SW_Overflow )    printk("SW: overflow\n");
printk84drivers/FPU-emu/errors.cif ( partial_status & SW_Zero_Div )    printk("SW: divide by zero\n");
printk85drivers/FPU-emu/errors.cif ( partial_status & SW_Denorm_Op )   printk("SW: denormalized operand\n");
printk86drivers/FPU-emu/errors.cif ( partial_status & SW_Invalid )     printk("SW: invalid operation\n");
printk89drivers/FPU-emu/errors.cprintk("At %p: %02x ", (void *) FPU_ORIG_EIP, byte1);
printk91drivers/FPU-emu/errors.cprintk("%02x (%02x+%d)\n", FPU_modrm, FPU_modrm & 0xf8, FPU_modrm & 7);
printk93drivers/FPU-emu/errors.cprintk("/%d, mod=%d rm=%d\n",
printk96drivers/FPU-emu/errors.cprintk(" SW: b=%d st=%ld es=%d sf=%d cc=%d%d%d%d ef=%d%d%d%d%d%d\n",
printk107drivers/FPU-emu/errors.cprintk(" CW: ic=%d rc=%ld%ld pc=%ld%ld iem=%d     ef=%d%d%d%d%d%d\n",
printk126drivers/FPU-emu/errors.cprintk("st(%d)  %c .0000 0000 0000 0000         ",
printk134drivers/FPU-emu/errors.cprintk("st(%d)  %c .%04lx %04lx %04lx %04lx e%+-6ld ", i,
printk143drivers/FPU-emu/errors.cprintk("Whoops! Error in errors.c      ");
printk146drivers/FPU-emu/errors.cprintk("%s\n", tag_desc[(int) (unsigned) r->tag]);
printk149drivers/FPU-emu/errors.cprintk("[data] %c .%04lx %04lx %04lx %04lx e%+-6ld ",
printk156drivers/FPU-emu/errors.cprintk("%s\n", tag_desc[(int) (unsigned) FPU_loaded_data.tag]);
printk267drivers/FPU-emu/errors.cprintk(FPU_VERSION" "__DATE__" (C) W. Metzenthen.\n");
printk278drivers/FPU-emu/errors.cprintk("FP Exception: %s!\n", exception_names[i].name);
printk282drivers/FPU-emu/errors.cprintk("FP emulator: Unknown Exception: 0x%04x!\n", n);
printk286drivers/FPU-emu/errors.cprintk("FP emulator: Internal error type 0x%04x\n", int_type);
printk45drivers/FPU-emu/exception.h#define  EXCEPTION(x)  { printk("exception in %s at line %d\n", \
printk163drivers/FPU-emu/fpu_entry.cprintk("ERROR: wm-FPU-emu is not RE-ENTRANT!\n");
printk194drivers/FPU-emu/fpu_entry.cprintk("math_emulate: %04x:%08lx\n",FPU_CS,FPU_EIP);
printk240drivers/FPU-emu/fpu_entry.cprintk("FPU emulator: Unknown prefix byte 0x%02x\n", code & 0xff);
printk537drivers/FPU-emu/fpu_entry.cprintk("%d FP instr., current=0x%04x\n", count, code);
printk618drivers/FPU-emu/fpu_entry.cprintk("ERROR: wm-FPU-emu math_abort failed!\n");
printk132drivers/FPU-emu/poly_sin.cprintk("\nEXP=%d, MS=%08x, LS=%08x\n", result->exp,
printk141drivers/FPU-emu/poly_sin.cprintk("\n***CORRECTING ILLEGAL RESULT*** in poly_sin() computation\n");
printk142drivers/FPU-emu/poly_sin.cprintk("EXP=%d, MS=%08x, LS=%08x\n", result->exp,
printk244drivers/block/blk.hprintk(DEVICE_NAME " I/O error\n");
printk245drivers/block/blk.hprintk("dev %04lX, sector %lu\n",
printk262drivers/block/blk.hprintk("end_request: buffer-list destroyed\n");
printk181drivers/block/cdu31a.cprintk("Sony CD-ROM request error: invalid device.\n");
printk945drivers/block/cdu31a.cprintk("Sony CDROM Read error: 0x%2.2x\n", res_reg[1]);
printk1045drivers/block/cdu31a.cprintk("Sony CDROM error 0x%2.2x (read_subcode)\n",
printk1165drivers/block/cdu31a.cprintk("Sony CDROM error 0x%2.2x (CDROMSTART)\n", res_reg[1]);
printk1183drivers/block/cdu31a.cprintk("Sony CDROM error 0x%2.2x (CDROMSTOP)\n", res_reg[1]);
printk1194drivers/block/cdu31a.cprintk("Sony CDROM error 0x%2.2x (CDROMPAUSE)\n", res_reg[1]);
printk1229drivers/block/cdu31a.cprintk("Sony CDROM error 0x%2.2x (CDROMRESUME)\n", res_reg[1]);
printk1250drivers/block/cdu31a.cprintk("Sony CDROM error 0x%2.2x (CDROMPLAYMSF)\n", res_reg[1]);
printk1393drivers/block/cdu31a.cprintk("Params: %x %x %x %x %x %x %x\n", params[0], params[1],
printk1395drivers/block/cdu31a.cprintk("Sony CDROM error 0x%2.2x (CDROMPLAYTRKIND\n", res_reg[1]);
printk1423drivers/block/cdu31a.cprintk("Sony CDROM error 0x%2.2x (CDROMVOLCTRL)\n", res_reg[1]);
printk1437drivers/block/cdu31a.cprintk("Sony CDROM error 0x%2.2x (CDROMEJECT)\n", res_reg[1]);
printk1473drivers/block/cdu31a.cprintk("Sony CDROM error 0x%2.2x (scd_open, spin up)\n", res_reg[1]);
printk1498drivers/block/cdu31a.cprintk("Sony CDROM error 0x%2.2x (scd_open, read toc)\n", res_reg[1]);
printk1679drivers/block/cdu31a.cprintk("Unable to get major %d for CDU-31a\n", MAJOR_NR);
printk1686drivers/block/cdu31a.cprintk("Sony I/F CDROM : %8.8s %16.16s %8.8s with %s load mechanism\n",
printk1691drivers/block/cdu31a.cprintk("  using %d byte buffer", sony_buffer_size);
printk1694drivers/block/cdu31a.cprintk(", capable of audio playback");
printk1696drivers/block/cdu31a.cprintk("\n");
printk1707drivers/block/cdu31a.cprintk("  Unable to set mechanical parameters: 0x%2.2x\n", res_reg[1]);
printk397drivers/block/floppy.cprintk("floppy_changed: not a floppy\n");
printk491drivers/block/floppy.cprintk("Unable to send byte to FDC\n");
printk507drivers/block/floppy.cprintk("floppy_stat reply overrun\n");
printk515drivers/block/floppy.cprintk("Getstatus times out\n");
printk527drivers/block/floppy.cprintk(DEVICE_NAME ": no current request\n");
printk557drivers/block/floppy.cprintk(DEVICE_NAME ": Invalid data rate for perpendicular mode!\n");
printk564drivers/block/floppy.cprintk(DEVICE_NAME ": perpendicular mode not supported by this FDC.\n");
printk586drivers/block/floppy.cprintk(DEVICE_NAME ": FIFO enabled\n");
printk605drivers/block/floppy.cprintk(" -- FDC reply errror");
printk608drivers/block/floppy.cprintk(": track %d, head %d, sector %d", reply_buffer[3],
printk630drivers/block/floppy.cprintk(DEVICE_NAME ": Drive %d is write protected\n", current_drive);
printk635drivers/block/floppy.cprintk(DEVICE_NAME ": Over/Underrun - retrying\n");
printk639drivers/block/floppy.cprintk(DEVICE_NAME " %d: ", ST0 & ST0_DS);
printk641drivers/block/floppy.cprintk("Recalibrate failed!");
printk643drivers/block/floppy.cprintk("data CRC error");
printk646drivers/block/floppy.cprintk("CRC error");
printk650drivers/block/floppy.cprintk("sector not found");
printk653drivers/block/floppy.cprintk("probe failed...");
printk655drivers/block/floppy.cprintk("wrong cylinder");
printk657drivers/block/floppy.cprintk("bad cylinder");
printk659drivers/block/floppy.cprintk("unknown error. ST[0..3] are: 0x%x 0x%x 0x%x 0x%x\n", ST0, ST1, ST2, ST3);
printk661drivers/block/floppy.cprintk("\n");
printk669drivers/block/floppy.cprintk(DEVICE_NAME ": Invalid FDC command given!\n");
printk673drivers/block/floppy.cprintk(DEVICE_NAME ": Abnormal termination caused by polling\n");
printk685drivers/block/floppy.cprintk("Auto-detected floppy type %s in fd%d\n",
printk753drivers/block/floppy.cprintk(DEVICE_NAME ": seek failed\n");
printk819drivers/block/floppy.cprintk(DEVICE_NAME ": unexpected interrupt\n");
printk881drivers/block/floppy.cprintk("Reset-floppy called\n");
printk943drivers/block/floppy.cprintk("Disk type is undefined after disk "
printk1008drivers/block/floppy.cprintk("FDC access conflict!");
printk1059drivers/block/floppy.cprintk("do_fd_request: unknown command\n");
printk1245drivers/block/floppy.cprintk("fd%d is %s",drive,base->name);
printk1248drivers/block/floppy.cprintk("fd%d is unknown type %d",drive,code);
printk1254drivers/block/floppy.cprintk("Floppy drive(s): ");
printk1259drivers/block/floppy.cprintk(", ");
printk1263drivers/block/floppy.cprintk("\n");
printk1295drivers/block/floppy.cprintk("floppy_release with fd_ref == 0");
printk1324drivers/block/floppy.cprintk(DEVICE_NAME ": weird interrupt ignored (%d)\n", result());
printk1355drivers/block/floppy.cprintk("Unable to get major %d for floppy\n",MAJOR_NR);
printk1364drivers/block/floppy.cprintk("Unable to grab IRQ%d for the floppy driver\n", FLOPPY_IRQ);
printk1366drivers/block/floppy.cprintk("Unable to grab DMA%d for the floppy driver\n", FLOPPY_DMA);
printk1371drivers/block/floppy.cprintk(DEVICE_NAME ": FDC failed to return version byte\n");
printk1376drivers/block/floppy.cprintk(DEVICE_NAME ": FDC version 0x%x\n", fdc_version);
printk67drivers/block/genhd.cprintk(" %s%c%d", hd->major_name,
printk103drivers/block/genhd.cprintk("Partition check:\n");
printk107drivers/block/genhd.cprintk("  unable to read partition table of device %04x\n",dev);
printk110drivers/block/genhd.cprintk("  %s%c:", hd->major_name, 'a'+(minor >> hd->minor_shift));
printk118drivers/block/genhd.cprintk(" %s%c%d", hd->major_name,'a'+(minor >> hd->minor_shift), i);
printk122drivers/block/genhd.cprintk(" <");
printk124drivers/block/genhd.cprintk(" >");
printk140drivers/block/genhd.cprintk(" %s%c%d", hd->major_name,
printk146drivers/block/genhd.cprintk(" bad partition table");
printk147drivers/block/genhd.cprintk("\n");
printk136drivers/block/hd.cprintk("HD: win_result: status = 0x%02x\n",i);
printk139drivers/block/hd.cprintk("HD: win_result: error = 0x%02x\n",hd_error);
printk228drivers/block/hd.cprintk("HD controller times out, status = 0x%02x\n",c);
printk236drivers/block/hd.cprintk("HD-controller reset\n");
printk241drivers/block/hd.cprintk("HD-controller still busy\n");
printk243drivers/block/hd.cprintk("HD-controller reset failed: %02x\n",hd_error);
printk278drivers/block/hd.cprintk("Unexpected HD interrupt\n");
printk332drivers/block/hd.cprintk("HD: read_intr: status = 0x%02x\n",i);
printk335drivers/block/hd.cprintk("HD: read_intr: error = 0x%02x\n",hd_error);
printk349drivers/block/hd.cprintk("hd%d : sector = %d, %d remaining to buffer = %08x\n",
printk383drivers/block/hd.cprintk("HD: write_intr: status = 0x%02x\n",i);
printk386drivers/block/hd.cprintk("HD: write_intr: error = 0x%02x\n",hd_error);
printk430drivers/block/hd.cprintk("HD timeout\n");
printk434drivers/block/hd.cprintk("hd : too many errors.\n");
printk468drivers/block/hd.cprintk("hd%d : attempted read for sector %d past end of device at sector %d.\n",
printk481drivers/block/hd.cprintk("hd%d : cyl = %d, head = %d, sector = %d, buffer = %08x\n",
printk507drivers/block/hd.cprintk("HD: do_hd_request: no DRQ\n");
printk693drivers/block/hd.cprintk("hd.c: ST-506 interface disk with more than 16 heads detected,\n");
printk694drivers/block/hd.cprintk("  probably due to non-standard sector translation. Giving up.\n");
printk695drivers/block/hd.cprintk("  (disk %d: cyl=%d, sect=%d, head=%d)\n", i,
printk708drivers/block/hd.cprintk("hd.c: unable to get IRQ%d for the harddisk driver\n",HD_IRQ);
printk734drivers/block/hd.cprintk("Unable to get major %d for harddisk\n",MAJOR_NR);
printk195drivers/block/ll_rw_blk.cprintk("Bad block dev command, must be R/W/RA/WA\n");
printk307drivers/block/ll_rw_blk.cprintk("Trying to read nonexistent block-device %04x (%d)\n",dev,page*8);
printk313drivers/block/ll_rw_blk.cprintk("Can't page to read-only device 0x%X\n",dev);
printk358drivers/block/ll_rw_blk.cprintk(
printk375drivers/block/ll_rw_blk.cprintk(
printk383drivers/block/ll_rw_blk.cprintk("Can't write to read-only device 0x%X\n",bh[0]->b_dev);
printk431drivers/block/ll_rw_blk.cprintk("ll_rw_swap_file: trying to swap nonexistent block-device\n");
printk436drivers/block/ll_rw_blk.cprintk("ll_rw_swap: bad block dev command, must be R/W");
printk440drivers/block/ll_rw_blk.cprintk("Can't swap to read-only device 0x%X\n",dev);
printk117drivers/block/mcd.cprintk("mcd: Mitsumi CD-ROM request error: invalid device.\n");
printk292drivers/block/mcd.cprintk("play: %02x:%02x.%02x to %02x:%02x.%02x\n",
printk338drivers/block/mcd.cprintk("play: %02x:%02x.%02x to %02x:%02x.%02x\n",
printk452drivers/block/mcd.cprintk("VOL %d %d\n", volctrl.channel0 & 0xFF, volctrl.channel1 & 0xFF);
printk470drivers/block/mcd.cprintk("%02X %02X %02X %02X\n", a, b, c, d);
printk475drivers/block/mcd.cprintk("F8 -> %02X\n", i & 0xFF);
printk524drivers/block/mcd.cprintk("<int-%02X>", st);
printk552drivers/block/mcd.cprintk("mcd: bad cmd %d\n", CURRENT -> cmd);
printk581drivers/block/mcd.cprintk("mcd: read failed after %d tries\n", MCD_RETRY_ATTEMPTS);
printk610drivers/block/mcd.cprintk("mcd: status timed out\n");
printk626drivers/block/mcd.cprintk("mcd: disk removed\n");
printk664drivers/block/mcd.cprintk("mcd: set mode timed out\n");
printk702drivers/block/mcd.cprintk("mcd: read failed\n");
printk704drivers/block/mcd.cprintk("got 0xB %02X\n", inb(MCDPORT(0)) & 0xFF);
printk715drivers/block/mcd.cprintk("mcd: data timeout, retrying\n");
printk755drivers/block/mcd.cprintk("mcd: no disk in drive\n");
printk816drivers/block/mcd.cprintk("mcd: Unable to get major %d for Mitsumi CD-ROM\n",
printk822drivers/block/mcd.cprintk("mcd: Init failed, I/O port (%X) already in use\n",
printk842drivers/block/mcd.cprintk("mcd: Init failed. No mcd device at 0x%x irq %d\n",
printk851drivers/block/mcd.cprintk("mcd: mitsumi get version failed at 0x%d\n",
printk856drivers/block/mcd.cprintk("mcd: Mitsumi version : %02X %c %x\n",
printk869drivers/block/mcd.cprintk("mcd: Unable to get IRQ%d for Mitsumi CD-ROM\n", MCD_INTR_NR);
printk874drivers/block/mcd.cprintk("mcd: Mitsumi CD-ROM Drive present at addr %x, irq %d\n",
printk1029drivers/block/mcd.cprintk("mcd: getValue timeout\n");
printk1129drivers/block/mcd.cprintk("Disk Info: first %d last %d length %02x:%02x.%02x first %02x:%02x.%02x\n",
printk1211drivers/block/mcd.cprintk("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X    %02X:%02X.%02X\n",
printk1216drivers/block/mcd.cprintk("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X    %02X:%02X.%02X\n",
printk81drivers/block/ramdisk.cprintk("RAMDISK: Unable to get major %d.\n", MEM_MAJOR);
printk113drivers/block/ramdisk.cprintk("RAMDISK: %d bytes, starting at 0x%x\n",
printk131drivers/block/ramdisk.cprintk("RAMDISK: I/O error while looking for super block!\n");
printk142drivers/block/ramdisk.cprintk("RAMDISK: trying old-style RAM image.\n");
printk147drivers/block/ramdisk.cprintk("RAMDISK: image too big! (%d/%d blocks)\n",
printk151drivers/block/ramdisk.cprintk("RAMDISK: Loading %d blocks into RAM disk", nblocks);
printk161drivers/block/ramdisk.cprintk("RAMDISK: I/O error on block %d, aborting!\n", 
printk167drivers/block/ramdisk.cif (!(nblocks-- & 15)) printk(".");
printk172drivers/block/ramdisk.cprintk("\ndone\n");
printk88drivers/block/xd.cprintk("xd_init: unable to get major number %d\n",MAJOR_NR);
printk98drivers/block/xd.cprintk("xd_init: detected a%s controller (type %d) at address %p\n",xd_sigs[controller].name,controller,address);
printk103drivers/block/xd.cprintk("xd_init: detected %d hard drive%s (using IRQ%d & DMA%d)\n",xd_drives,xd_drives == 1 ? "" : "s",xd_irq,xd_dma);
printk105drivers/block/xd.cprintk("xd_init: drive %d geometry - heads = %d, cylinders = %d, sectors = %d\n",i,xd_info[i].heads,xd_info[i].cylinders,xd_info[i].sectors);
printk109drivers/block/xd.cprintk("xd_init: unable to get DMA%d\n",xd_dma);
printk114drivers/block/xd.cprintk("xd_init: unable to get IRQ%d\n",xd_irq);
printk193drivers/block/xd.cdefault:  printk("do_xd_request: unknown request\n"); break;
printk285drivers/block/xd.cprintk("xd_readwrite: operation = %s, drive = %d, buffer = 0x%X, block = %d, count = %d\n",operation == READ ? "read" : "write",drive,buffer,block,count);
printk298drivers/block/xd.cprintk("xd_readwrite: drive = %d, head = %d, cylinder = %d, sector = %d, count = %d\n",drive,head,cylinder,sector,temp);
printk305drivers/block/xd.ccase 1: printk("xd_readwrite: timeout, recalibrating drive\n"); xd_recalibrate(drive); return (0);
printk307drivers/block/xd.ccase 0: printk("xd_readwrite: drive error, code = 0x%X",sense[0] & 0x0F); break;
printk308drivers/block/xd.ccase 1: printk("xd_readwrite: controller error, code = 0x%X",sense[0] & 0x0F); break;
printk309drivers/block/xd.ccase 2: printk("xd_readwrite: command error, code = 0x%X",sense[0] & 0x0F); break;
printk310drivers/block/xd.ccase 3: printk("xd_readwrite: miscellaneous error, code = 0x%X",sense[0] & 0x0F); break;
printk313drivers/block/xd.cprintk(" - drive = %d, head = %d, cylinder = %d, sector = %d\n",sense[1] & 0xE0,sense[1] & 0x1F,((sense[2] & 0xC0) << 2) | sense[3],sense[2] & 0x3F);
printk315drivers/block/xd.cprintk(" - no valid disk address\n");
printk330drivers/block/xd.cprintk("xd_recalibrate: warning! error recalibrating, controller may be unstable\n");
printk338drivers/block/xd.cprintk("xd_interrupt_handler: interrupt detected\n");
printk344drivers/block/xd.cprintk("xd_interrupt_handler: unexpected interrupt\n");
printk353drivers/block/xd.cprintk("xd_setup_dma: using PIO, transfer overlaps 64k boundary\n");
printk366drivers/block/xd.cprintk("xd_setup_dma: using PIO, cannot DMA above 16 meg\n");
printk401drivers/block/xd.cprintk("xd_command: command = 0x%X, mode = 0x%X, indata = 0x%X, outdata = 0x%X, sense = 0x%X\n",command,mode,indata,outdata,sense);
printk446drivers/block/xd.cprintk("xd_command: warning! sense command failed!\n");
printk450drivers/block/xd.cprintk("xd_command: completed with csb = 0x%X\n",csb);
printk475drivers/block/xd.cdefault:        printk("xd_dtc_init_controller: unsupported BIOS address %p\n",address);
printk504drivers/block/xd.cprintk("xd_dtc_init_drive: error setting step rate for drive %d\n",drive);
printk507drivers/block/xd.cprintk("xd_dtc_init_drive: error reading geometry for drive %d\n",drive);
printk519drivers/block/xd.cdefault:        printk("xd_wd_init_controller: unsupported BIOS address %p\n",address);
printk548drivers/block/xd.cprintk("xd_wd_init_drive: error reading geometry for drive %d\n",drive);  
printk558drivers/block/xd.cdefault:  printk("xd_seagate_init_controller: unsupported BIOS address %p\n",address);
printk580drivers/block/xd.cprintk("xd_seagate_init_drive: error reading geometry from drive %d\n",drive);
printk636drivers/block/xd.cprintk("xd_setparam: error setting characteristics for drive %d\n",drive);
printk162drivers/char/atixlmouse.cprintk("\nATI Inport ");
printk176drivers/char/atixlmouse.cprintk("Bus mouse detected and installed.\n");
printk238drivers/char/busmouse.cprintk("Logitech Bus mouse detected and installed.\n");
printk968drivers/char/console.cprintk("con_write: illegal tty (%d)\n", currcons);
printk1443drivers/char/console.cprintk("Console: %s %s %ldx%ld, %d virtual consoles\n",
printk244drivers/char/keyboard.cprintk("keyboard: unknown scancode e0 %02x\n", scancode);
printk250drivers/char/keyboard.cprintk("keyboard: scancode (%02x) not in range 00 - %2x\n", scancode, E0_BASE - 1);
printk352drivers/char/keyboard.cprintk("\n");
printk353drivers/char/keyboard.cprintk("EIP: %04x:%08lx",0xffff & pt_regs->cs,pt_regs->eip);
printk355drivers/char/keyboard.cprintk(" ESP: %04x:%08lx",0xffff & pt_regs->ss,pt_regs->esp);
printk356drivers/char/keyboard.cprintk(" EFLAGS: %08lx\n",pt_regs->eflags);
printk357drivers/char/keyboard.cprintk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
printk359drivers/char/keyboard.cprintk("ESI: %08lx EDI: %08lx EBP: %08lx",
printk361drivers/char/keyboard.cprintk(" DS: %04x ES: %04x FS: %04x GS: %04x\n",
printk64drivers/char/lp.cprintk("lp success after %d counts.\n",count);
printk147drivers/char/lp.cprintk("lp%d out of paper\n", minor);
printk151drivers/char/lp.cprintk("lp%d off-line\n", minor);
printk155drivers/char/lp.cprintk("lp%d printer error\n", minor);
printk220drivers/char/lp.cprintk("lp%d out of paper\n", minor);
printk228drivers/char/lp.cprintk("lp%d off-line\n", minor);
printk237drivers/char/lp.cprintk("lp%d on fire\n", minor);
printk253drivers/char/lp.cprintk("lp sleeping at %d characters for %d jiffies\n",
printk306drivers/char/lp.cprintk("lp%d unable to use interrupt %d, error %d\n", minor, irq, ret);
printk338drivers/char/lp.cprintk("lp%d ioctl, cmd: 0x%x, arg: 0x%x\n", minor, cmd, arg);
printk437drivers/char/lp.cprintk("unable to get major %d for line printer\n", LP_MAJOR);
printk450drivers/char/lp.cprintk("lp_init: lp%d exists (%d), ", offset, testvalue);
printk452drivers/char/lp.cprintk("using IRQ%d\n", LP_IRQ(offset));
printk454drivers/char/lp.cprintk("using polling driver\n");
printk459drivers/char/lp.cprintk("lp_init: no lp devices found\n");
printk394drivers/char/mem.cprintk("unable to get major %d for memory devs\n", MEM_MAJOR);
printk96drivers/char/mouse.cprintk("unable to get major %d for mouse devices\n",
printk174drivers/char/msbusmouse.cprintk("Microsoft BusMouse detected and installed.\n");
printk250drivers/char/psaux.cprintk("Warning: Mouse device busy in release_qp()\n");
printk254drivers/char/psaux.cprintk("Warning: Mouse device busy in release_qp()\n");
printk321drivers/char/psaux.cprintk("Error: Mouse device busy in open_qp()\n");
printk445drivers/char/psaux.cprintk("Probing 82C710 mouse port device.\n");
printk447drivers/char/psaux.cprintk("82C710 type pointing device detected -- driver installed.\n");
printk457drivers/char/psaux.cprintk("PS/2 auxiliary pointing device detected -- driver installed.\n");
printk364drivers/char/serial.cprintk("DR...");
printk402drivers/char/serial.cprintk("THRE...");
printk415drivers/char/serial.cprintk("DDCD...");
printk427drivers/char/serial.cprintk("CTS tx start...");
printk436drivers/char/serial.cprintk("CTS tx stop...");
printk501drivers/char/serial.cprintk("recheck_count = %d\n", recheck_count);
printk701drivers/char/serial.cprintk("unlinking serial port %d from irq %d....", info->line,
printk716drivers/char/serial.cprintk("linking serial port %d into irq %d...", info->line,
printk985drivers/char/serial.cprintk("throttle tty%d: %d (%d, %d)....\n", DEV_TO_SL(tty->line),
printk1303drivers/char/serial.cprintk("Wild interrupt?  (IRQ %d)\n", i);
printk1437drivers/char/serial.cprintk("rs_close ttys%d, count = %d\n", info->line, info->count);
printk1526drivers/char/serial.cprintk("block_til_ready before block: ttys%d, count = %d\n",
printk1557drivers/char/serial.cprintk("block_til_ready blocking: ttys%d, count = %d\n",
printk1567drivers/char/serial.cprintk("block_til_ready after blocking: ttys%d, count = %d\n",
printk1596drivers/char/serial.cprintk("rs_open ttys%d, count = %d\n", info->line, info->count);
printk1662drivers/char/serial.cprintk("Serial driver version 3.96 with");
printk1664drivers/char/serial.cprintk(" AST_FOURPORT");
printk1668drivers/char/serial.cprintk(" ACCENT_ASYNC");
printk1672drivers/char/serial.cprintk(" HUB-6");
printk1676drivers/char/serial.cprintk (" AUTO_IRQ");
printk1680drivers/char/serial.cprintk(" enabled\n");
printk1682drivers/char/serial.cprintk(" no serial options enabled\n");
printk1918drivers/char/serial.cprintk("tty%02d%s at 0x%04x (irq = %d)", info->line, 
printk1923drivers/char/serial.cprintk(" is a 8250\n");
printk1926drivers/char/serial.cprintk(" is a 16450\n");
printk1929drivers/char/serial.cprintk(" is a 16550\n");
printk1932drivers/char/serial.cprintk(" is a 16550A\n");
printk1935drivers/char/serial.cprintk("\n");
printk368drivers/char/tpqic02.cprintk(TPQIC_NAME ": %s\n", s);
printk410drivers/char/tpqic02.cprintk(TPQIC_NAME ": sense: %s\n", exception_list[n].msg);
printk569drivers/char/tpqic02.cprintk(TPQIC_NAME ": reset failed!\n");
printk571drivers/char/tpqic02.cprintk(TPQIC_NAME ": reset successful\n");
printk674drivers/char/tpqic02.cTPQDEB({printk("wait_for_ready: additional timeout: %d\n", spin_t);})
printk797drivers/char/tpqic02.cprintk(TPQIC_NAME ": reading status bytes: ");
printk813drivers/char/tpqic02.cprintk("[%1d]=0x%x  ", q-stp, (unsigned) (*q) & 0xff);
printk832drivers/char/tpqic02.cprintk("\n");
printk877drivers/char/tpqic02.cprintk("\n" TPQIC_NAME ": %2d:");
printk878drivers/char/tpqic02.cprintk(" %2x", vus[i] & 0xff);
printk880drivers/char/tpqic02.cprintk("\n");
printk895drivers/char/tpqic02.cprintk(TPQIC_NAME ": tp_sense(ignore=0x%x) enter\n", ignore);
printk911drivers/char/tpqic02.cprintk(TPQIC_NAME ": tp_sense: status: %x, error count: %d, underruns: %d\n",
printk914drivers/char/tpqic02.cprintk(TPQIC_NAME ": tp_sense: no errors at all, soft error count: %d, underruns: %d\n",
printk976drivers/char/tpqic02.cprintk(TPQIC_NAME ": Waiting for (re-)wind to finish: stat=0x%x\n", stat);
printk1011drivers/char/tpqic02.cprintk(TPQIC_NAME ": ll_do_qic_cmd(%x, %d) failed\n", cmd, timeout);
printk1047drivers/char/tpqic02.cprintk(TPQIC_NAME ": Exception persist in ll_do_qic_cmd[1](%x, %d)", cmd, timeout);
printk1054drivers/char/tpqic02.cprintk(TPQIC_NAME ": ll_do_qic_cmd: send_qic02_cmd failed, stat = 0x%x\n", stat);
printk1068drivers/char/tpqic02.cprintk(TPQIC_NAME ": Exception persist in ll_do_qic_cmd[2](%x, %d)\n", cmd, timeout);
printk1076drivers/char/tpqic02.cprintk(TPQIC_NAME ": ll_do_qic_cmd %x: wait failed, stat == 0x%x\n", cmd, stat);
printk1179drivers/char/tpqic02.cprintk(TPQIC_NAME ": rewind failed in do_qic_cmd(). stat=0x%2x", stat);
printk1488drivers/char/tpqic02.cTPQDEB({printk(TPQIC_NAME ": doing_read==%d, doing_write==%d\n", doing_read, doing_write);})
printk1533drivers/char/tpqic02.cprintk(TPQIC_NAME ": start_dma: init %s failed\n",
printk1552drivers/char/tpqic02.cprintk(TPQIC_NAME ": requested unknown mode %d\n", mode);
printk1646drivers/char/tpqic02.cprintk("time-out in %s driver\n", TPQIC_NAME);
printk1700drivers/char/tpqic02.cprintk("@");
printk1718drivers/char/tpqic02.cprintk("      status %02x\n", stat);
printk1743drivers/char/tpqic02.cprintk(TPQIC_NAME ": dma_residue == %x !!!\n", i);
printk1766drivers/char/tpqic02.cprintk(TPQIC_NAME ": Unexpected interrupt, stat == %x\n",
printk1819drivers/char/tpqic02.cprintk(TPQIC_NAME ": request READ, minor=%x, buf=%lx, count=%x, pos=%x, flags=%x\n",
printk1836drivers/char/tpqic02.cprintk(TPQIC_NAME ": read: verify_area(WRITE, %lx, %x) failed\n", buf, count);
printk1852drivers/char/tpqic02.cprintk("read: return_read_eof==%d, reported_read_eof==%d, total_bytes_done==%d\n", return_read_eof, reported_read_eof, total_bytes_done);
printk1914drivers/char/tpqic02.cprintk("Trouble: stat==%02x\n", stat);
printk1930drivers/char/tpqic02.cprintk(TPQIC_NAME ": read(): return_read_eof=%d, status_eof_detected=YES. return_read_eof:=YES\n", return_read_eof);
printk1988drivers/char/tpqic02.cprintk(TPQIC_NAME ": request WRITE, minor=%x, buf=%lx, count=%x, pos=%x, flags=%x\n",
printk2013drivers/char/tpqic02.cprintk(TPQIC_NAME ": write: verify_area(READ, %lx, %x) failed\n", buf, count);
printk2110drivers/char/tpqic02.cprintk(TPQIC_NAME ": status_bytes_wr %x, buf %x, total_bytes_done %x, count %x\n", status_bytes_wr, buf, total_bytes_done, count);
printk2137drivers/char/tpqic02.cprintk("tape_qic02_open: dev=%x, flags=%x     ", dev, flags);
printk2244drivers/char/tpqic02.cprintk(TPQIC_NAME ": format: %s%s\n", (dens!=0)? "QIC-" : "", format_names[dens]);
printk2295drivers/char/tpqic02.cprintk("tape_qic02_release: dev=%x\n", dev);
printk2340drivers/char/tpqic02.cprintk(TPQIC_NAME ": ioctl(%4x, %4x, %4x)\n", dev_maj, iocmd, ioarg);
printk2348drivers/char/tpqic02.cprintk(TPQIC_NAME ": Oops! Wrong device?\n");
printk2382drivers/char/tpqic02.cprintk("OP op=%4x, count=%4x\n", operation.mt_op, operation.mt_count);
printk2410drivers/char/tpqic02.cprintk("GET ");
printk2438drivers/char/tpqic02.cprintk("POS ");
printk2517drivers/char/tpqic02.cprintk(TPQIC_NAME ": IRQ %d, DMA %d, IO %xh, IFC %s, %s, %s\n",
printk2549drivers/char/tpqic02.cprintk(TPQIC_NAME ": can't allocate IRQ%d for QIC-02 tape\n",
printk2556drivers/char/tpqic02.cprintk(TPQIC_NAME ": can't allocate DMA%d for QIC-02 tape\n",
printk2563drivers/char/tpqic02.cprintk(TPQIC_NAME ": internal error: tpstatus struct incorrect!\n");
printk2567drivers/char/tpqic02.cprintk(TPQIC_NAME ": internal error: DMA buffer size out of range\n");
printk2571drivers/char/tpqic02.cprintk(TPQIC_NAME ": DMA buffers: %u blocks", NR_BLK_BUF);
printk2578drivers/char/tpqic02.cprintk(", at address 0x%lx (0x%lx)\n", buffaddr, (unsigned long) &tape_qic02_buf);
printk2582drivers/char/tpqic02.cprintk(TPQIC_NAME ": DMA buffer *must* be in lower 16MB\n");
printk2589drivers/char/tpqic02.cprintk(TPQIC_NAME ": Unable to get chrdev major %d\n",
printk169drivers/char/tty_io.cprintk("tty_write_flush: bit already cleared\n");
printk180drivers/char/tty_io.cprintk("tty_read_flush: bit already cleared\n");
printk485drivers/char/tty_io.cprintk("copy_to_cooked: called with NULL tty\n");
printk489drivers/char/tty_io.cprintk("copy_to_cooked: tty %d has null write routine\n",
printk1001drivers/char/tty_io.cprintk("tty_read: bad pseudo-major nr #%d\n", MAJOR(dev));
printk1035drivers/char/tty_io.cprintk("tty_write: pseudo-major != TTY_MAJOR\n");
printk1200drivers/char/tty_io.cprintk("release_dev: tty_table[%d] was NULL\n", dev);
printk1204drivers/char/tty_io.cprintk("release_dev: tty_termios[%d] was NULL\n", dev);
printk1211drivers/char/tty_io.cprintk("release_dev: pty pair(%d) was NULL\n", dev);
printk1215drivers/char/tty_io.cprintk("release_dev: pty pair(%d) termios was NULL\n", dev);
printk1219drivers/char/tty_io.cprintk("release_dev: bad pty pointers\n");
printk1228drivers/char/tty_io.cprintk("release_dev: bad tty slave count (dev = %d): %d\n",
printk1234drivers/char/tty_io.cprintk("release_dev: bad tty_table[%d]->count: %d\n",
printk1308drivers/char/tty_io.cprintk("Bad major #%d in tty_open\n", MAJOR(inode->i_rdev));
printk1366drivers/char/tty_io.cprintk("tty_release: tty pseudo-major != TTY_MAJOR\n");
printk1371drivers/char/tty_io.cprintk("tty_release: bad f_rdev\n");
printk1384drivers/char/tty_io.cprintk("tty_select: tty pseudo-major != TTY_MAJOR\n");
printk1390drivers/char/tty_io.cprintk("tty_select: tty struct for dev %d was NULL\n", dev);
printk27drivers/char/tty_ioctl.c# define  PRINTK(x)  printk (x)
printk144drivers/char/tty_ioctl.cprintk("Warning?!? termios_locked is NULL.\n");
printk421drivers/char/tty_ioctl.cprintk("tty_ioctl: tty pseudo-major != TTY_MAJOR\n");
printk185drivers/net/3c501.cprintk("%s: 3c501 probe failed to detect IRQ line.\n", dev->name);
printk198drivers/net/3c501.cprintk("%s: 3c501 EtherLink at %#x, using %sIRQ %d, melting ethernet.\n",
printk202drivers/net/3c501.cprintk("%s", version);
printk248drivers/net/3c501.cprintk("%s: Doing el_open()...", dev->name);
printk252drivers/net/3c501.cprintk("interrupt busy, exiting el_open().\n");
printk263drivers/net/3c501.cprintk("finished el_open().\n");
printk274drivers/net/3c501.cprintk(" transmitter busy, deferred.\n");
printk278drivers/net/3c501.cprintk ("%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",
printk310drivers/net/3c501.cprintk("%s: el_start_xmit(%d)...", dev->name, skb->len);
printk314drivers/net/3c501.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk334drivers/net/3c501.cprintk(" queued xmit.\n");
printk353drivers/net/3c501.cprintk (EL_NAME ": irq %d for unknown device\n", irq);
printk362drivers/net/3c501.cprintk("%s: el_interrupt() aux=%#02x", dev->name, axsr);
printk364drivers/net/3c501.cprintk("%s: Reentering the interrupt driver!\n", dev->name);
printk371drivers/net/3c501.cprintk(" txsr=%02x gp=%04x rp=%04x", txsr, inw(GP_LOW),
printk375drivers/net/3c501.cprintk("%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x"
printk382drivers/net/3c501.cprintk("%s: Transmit failed 16 times, ethernet jammed?\n",
printk388drivers/net/3c501.cprintk(" retransmitting after a collision.\n");
printk398drivers/net/3c501.cprintk(" Tx succeeded %s\n",
printk406drivers/net/3c501.cprintk(" rxsr=%02x txsr=%02x rp=%04x", rxsr, inb(TX_STATUS),
printk414drivers/net/3c501.cif (el_debug > 5) printk(" runt.\n");
printk419drivers/net/3c501.cprintk("%s: No packet seen, rxsr=%02x **resetting 3c501***\n",
printk424drivers/net/3c501.cprintk(".\n");
printk447drivers/net/3c501.cprintk(" el_receive %d.\n", pkt_len);
printk451drivers/net/3c501.cprintk("%s: bogus packet, length=%d\n", dev->name, pkt_len);
printk461drivers/net/3c501.cprintk("%s: Memory squeeze, dropping packet.\n", dev->name);
printk491drivers/net/3c501.cprintk("3c501 reset...");
printk517drivers/net/3c501.cprintk("%s: Shutting down ethercard at %#x.\n", dev->name, ioaddr);
printk123drivers/net/3c503.cprintk("3c503 probe at %#3x:", ioaddr);
printk129drivers/net/3c503.cprintk("  not found.\n");
printk138drivers/net/3c503.cprintk(" %2.2X", (station_addr[i] = inb(ioaddr + i)));
printk143drivers/net/3c503.cprintk("  3C503 not found.\n");
printk158drivers/net/3c503.cif (ei_debug > 2) printk(" memory jumpers %2.2x ", membase_reg);
printk188drivers/net/3c503.cprintk(" memory failure or memory address conflict.\n");
printk204drivers/net/3c503.cprintk("\n3c503: memory params start=%#5x rstart=%#5x end=%#5x rend=%#5x.\n",
printk219drivers/net/3c503.cprintk("\n3c503: configured interrupt %d invalid, using autoIRQ.\n",
printk231drivers/net/3c503.cprintk("\n%s: %s with shared memory at %#6x-%#6x,\n",
printk234drivers/net/3c503.cprintk("\n%s: %s using programmed I/O (REJUMPER for SHARED MEMORY).\n",
printk237drivers/net/3c503.cprintk(version);
printk296drivers/net/3c503.cprintk("%s: Resetting the 3c503 board...", dev->name);
printk297drivers/net/3c503.cprintk("%#x=%#02x %#x=%#02x %#x=%#02x...", E33G_IDCFR, inb(E33G_IDCFR),
printk304drivers/net/3c503.cif (ei_debug > 1) printk("done\n");
printk353drivers/net/3c503.cprintk("%s: 3c503 send_packet() bad memory copy @ %#5x.\n",
printk356drivers/net/3c503.cprintk("%s: 3c503 send_packet() good memory copy @ %#5x.\n",
printk374drivers/net/3c503.cprintk("%s: FIFO blocked in el2_block_output (at %d of %d, bc=%d).\n",
printk399drivers/net/3c503.cprintk("%s: 3c503 block_input() @ %#5x+%x=%5x.\n",
printk408drivers/net/3c503.cprintk("%s: 3c503 block_input() @ %#5x+%x=%5x.\n",
printk426drivers/net/3c503.cprintk("%s: FIFO blocked in el2_block_input() (at %d of %d, bc=%d).\n",
printk331drivers/net/3c507.cprintk("%s: 3c507 at %#x,", dev->name, ioaddr);
printk340drivers/net/3c507.cprintk ("unable to get IRQ %d (irqval=%d).\n", irq, irqval);
printk351drivers/net/3c507.cprintk(" %02x", dev->dev_addr[i]);
printk374drivers/net/3c507.cprintk("%s: Warning, this version probably only works with 64K of"
printk384drivers/net/3c507.cprintk(", IRQ %d, %sternal xcvr, memory %#x-%#x.\n", dev->irq,
printk388drivers/net/3c507.cprintk(version);
printk459drivers/net/3c507.cprintk("%s: transmit timed out, %s?  ", dev->name,
printk464drivers/net/3c507.cif (net_debug > 1) printk("Resetting board.\n");
printk469drivers/net/3c507.cif (net_debug > 1) printk("Kicking board.\n");
printk497drivers/net/3c507.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk531drivers/net/3c507.cprintk ("net_interrupt(): irq %d for unknown device.\n", irq);
printk543drivers/net/3c507.cprintk("%s: 3c507 interrupt, status %4.4x.\n", dev->name, status);
printk554drivers/net/3c507.cif (net_debug > 5)  printk("Couldn't reap %#x.\n", lp->tx_reap);
printk570drivers/net/3c507.cprintk("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status);
printk580drivers/net/3c507.cprintk("Received packet, rx_head %04x.\n", lp->rx_head);
printk589drivers/net/3c507.cprintk("%s: Command unit stopped, status %04x, restarting.\n",
printk602drivers/net/3c507.cprintk("%s: Rx unit stopped, status %04x, restarting.\n",
printk746drivers/net/3c507.cprintk("%s: i82586 initialization timed out with status %04x,"
printk758drivers/net/3c507.cprintk("%s: Initialized 82586, status %04x.\n", dev->name,
printk801drivers/net/3c507.cprintk("%s: 3c507 @%x send length = %d, tx_block %3x, next %3x.\n",
printk829drivers/net/3c507.cprintk("%s: Rx frame at %#x corrupted, status %04x cmd %04x"
printk850drivers/net/3c507.cprintk("%s: Memory squeeze, dropping packet.\n", dev->name);
printk204drivers/net/3c509.cprintk("%s: 3c509 at %#3.3x   tag %d, %s port, address ",
printk210drivers/net/3c509.cprintk(" %2.2x", dev->dev_addr[i]);
printk211drivers/net/3c509.cprintk(", IRQ %d.\n", dev->irq);
printk218drivers/net/3c509.cprintk(version);
printk289drivers/net/3c509.cprintk("  3c509 EEPROM word %d %#4.4x.\n", index, word);
printk308drivers/net/3c509.cprintk("%s: Opening, IRQ %d   status@%x %4.4x.\n", dev->name,
printk348drivers/net/3c509.cprintk("%s: Opened 3c509  IRQ %d  status %4.4x.\n",
printk365drivers/net/3c509.cprintk("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
printk391drivers/net/3c509.cprintk("%s: el3_start_xmit(lenght = %d) called, status %4.4x.\n",
printk399drivers/net/3c509.cprintk("%s: Missed interrupt, status then %04x now %04x"
printk412drivers/net/3c509.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk438drivers/net/3c509.cprintk("    Tx status %4.4x.\n", tx_status);
printk458drivers/net/3c509.cprintk ("el3_interrupt(): irq %d for unknown device.\n", irq);
printk463drivers/net/3c509.cprintk("%s: Re-entering the interrupt handler.\n", dev->name);
printk470drivers/net/3c509.cprintk("%s: interrupt, status %4.4x.\n", dev->name, status);
printk479drivers/net/3c509.cprintk("  TX room bit was handled.\n");
printk489drivers/net/3c509.cprintk("%s: Infinite loop in interrupt, status %4.4x.\n",
printk498drivers/net/3c509.cprintk("%s: exiting interrupt, status %4.4x.\n", dev->name,
printk528drivers/net/3c509.cprintk("   Updating the statistics.\n");
printk559drivers/net/3c509.cprintk("     In rx_packet(), status %4.4x, rx_status %4.4x.\n",
printk582drivers/net/3c509.cprintk("     Receiving packet size %d status %4.4x.\n",
printk603drivers/net/3c509.cprintk("   dev_rint() happy, status %4.4x.\n",
printk607drivers/net/3c509.cprintk("  Waiting for 3c509 to discard packet, status %x.\n",
printk610drivers/net/3c509.cprintk("   discarded packet, status %4.4x.\n",
printk614drivers/net/3c509.cprintk("%s: receive buffers full.\n", dev->name);
printk619drivers/net/3c509.cprintk("%s: Couldn't allocate a sk_buff of size %d.\n",
printk625drivers/net/3c509.cprintk("  Waiting for 3c509 to discard packet, status %x.\n",
printk630drivers/net/3c509.cprintk("     Exiting rx_packet(), status %4.4x, rx_status %4.4x.\n",
printk662drivers/net/3c509.cprintk("%s: Shutting down ethercard.\n", dev->name);
printk110drivers/net/8390.cprintk("%s: Opening a non-existent physical device\n", dev->name);
printk142drivers/net/8390.cprintk("%s: transmit timed out, TX status %#2x, ISR %#2x.\n",
printk147drivers/net/8390.cprintk("%s: Possible IRQ conflict on IRQ%d?", dev->name, dev->irq);
printk149drivers/net/8390.cprintk("%s: Possible network cable problem?\n", dev->name);
printk153drivers/net/8390.cprintk("\n");
printk181drivers/net/8390.cprintk("%s: Attempt to reenter critical zone%s.\n",
printk199drivers/net/8390.cprintk("%s: idle transmitter tx2=%d, lasttx=%d, txing=%d.\n",
printk206drivers/net/8390.cprintk("%s: idle transmitter, tx1=%d, lasttx=%d, txing=%d.\n",
printk213drivers/net/8390.cprintk("%s: No packet buffer space for ping-pong use.\n",
printk266drivers/net/8390.cprintk ("net_interrupt(): irq %d for unknown device.\n", irq);
printk274drivers/net/8390.cprintk(ei_local->irqlock
printk288drivers/net/8390.cprintk("%s: interrupt(isr=%#2.2x).\n", dev->name,
printk323drivers/net/8390.cprintk("%s: unknown interrupt %#2x\n", dev->name, interrupts);
printk345drivers/net/8390.cprintk("%s: bogus last_tx_buffer %d, tx1=%d.\n",
printk359drivers/net/8390.cprintk("%s: bogus last_tx_buffer %d, tx2=%d.\n",
printk372drivers/net/8390.cprintk("%s: unexpected TX-done interrupt, lasttx=%d.\n",
printk426drivers/net/8390.cprintk("%s: mismatched read page pointers %2x vs %2x.\n",
printk453drivers/net/8390.cprintk("%s: bogus packet header, status=%#2x nxpg=%#2x sz=%#x (at %#4x)\n",
printk460drivers/net/8390.cprintk("%s:  setting next frame to %#2x (nxt=%#2x, rx_frm.nx=%#2x rx_frm.stat=%#2x).\n",
printk468drivers/net/8390.cprintk("%s: recovery failed, resetting at packet #%d..",
printk473drivers/net/8390.cprintk("restarting.\n");
printk480drivers/net/8390.cprintk("%s: bogus packet size, status=%#2x nxpg=%#2x size=%#x\n",
printk489drivers/net/8390.cprintk("%s: Couldn't allocate a sk_buff of size %d.\n",
printk517drivers/net/8390.cprintk("%s: bogus packet, status=%#2x nxpg=%#2x size=%d\n",
printk526drivers/net/8390.cprintk("%s: next frame inconsistency, %#2x..", dev->name, next_frame);
printk554drivers/net/8390.cprintk("%s: Receiver overrun.\n", dev->name);
printk565drivers/net/8390.cprintk("%s: reset did not complete at ei_rx_overrun.\n",
printk621drivers/net/8390.cprintk(version);
printk738drivers/net/8390.cprintk("%s: trigger_send() called with the transmitter busy.\n",
printk173drivers/net/at1700.cprintk("AT1700 signature match failed at %d (%04x vs. %04x)\n",
printk187drivers/net/at1700.cprintk ("AT1700 found at %#3x, but it's unusable due to a conflict on"
printk192drivers/net/at1700.cprintk("%s: AT1700 found at %#3x, IRQ %d, address ", dev->name,
printk201drivers/net/at1700.cprintk("%04x", eeprom_val);
printk216drivers/net/at1700.cprintk(" %s interface (%04x).\n", porttype[(dev->if_port>>3) & 3],
printk242drivers/net/at1700.cprintk(version);
printk379drivers/net/at1700.cprintk("%s: transmit timed out with status %04x, %s?\n", dev->name,
printk382drivers/net/at1700.cprintk("%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n",
printk416drivers/net/at1700.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk422drivers/net/at1700.cprintk("%s: Transmitting a packet of length %d.\n", dev->name,
printk464drivers/net/at1700.cprintk ("at1700_interrupt(): irq %d for unknown device.\n", irq);
printk475drivers/net/at1700.cprintk("%s: Interrupt with status %04x.\n", dev->name, status);
printk514drivers/net/at1700.cprintk("%s: Rxing packet mode %02x status %04x.\n",
printk536drivers/net/at1700.cprintk("%s: The AT1700 claimed a very large packet, size %d.\n",
printk544drivers/net/at1700.cprintk("%s: Memory squeeze, dropping packet (len %d).\n",
printk560drivers/net/at1700.cprintk("%s: Rxed packet of length %d: ", dev->name, pkt_len);
printk562drivers/net/at1700.cprintk(" %02x", ((unsigned char*)(skb + 1))[i]);
printk563drivers/net/at1700.cprintk(".\n");
printk594drivers/net/at1700.cprintk("%s: Exint Rx packet with mode %02x after %d ticks.\n", 
printk83drivers/net/auto_irq.cprintk(" Spurious interrupt on IRQ %d\n", i);
printk59drivers/net/d_link.c#define PRINTK(x) if (d_link_debug >= 2) printk x
printk321drivers/net/d_link.cprintk ("%s: unable to get IRQ %d\n", dev->name, D_LINK_IRQ);
printk418drivers/net/d_link.cprintk("%s: transmit timed out (%d), %s?\n",
printk478drivers/net/d_link.cprintk("%s: bogus interrupt %d\n", dev?dev->name:"DE-600", irq);
printk578drivers/net/d_link.cprintk("%s: Bogus packet size %d.\n", dev->name, size);
printk584drivers/net/d_link.cprintk("%s: Couldn't allocate a sk_buff of size %d.\n",
printk604drivers/net/d_link.cprintk("%s: receive buffers full.\n", dev->name);
printk617drivers/net/d_link.cprintk("%s: D-Link DE-600 pocket adapter", dev->name);
printk620drivers/net/d_link.cprintk(version);
printk629drivers/net/d_link.cprintk(": not at I/O %#3x.\n", DATA_PORT);
printk654drivers/net/d_link.cprintk(" not identified in the printer port\n");
printk658drivers/net/d_link.cprintk(", Ethernet Address: %2.2X", dev->dev_addr[0]);
printk660drivers/net/d_link.cprintk(":%2.2X",dev->dev_addr[i]);
printk661drivers/net/d_link.cprintk("\n");
printk349drivers/net/eexpress.cprintk("%s: EtherExpress at %#x,", dev->name, ioaddr);
printk359drivers/net/eexpress.cprintk(" rejected (invalid address %04x%04x%04x).\n",
printk370drivers/net/eexpress.cprintk(" %02x", dev->dev_addr[i]);
printk384drivers/net/eexpress.cprintk(", IRQ %d, Interface %s.\n", dev->irq, ifmap[dev->if_port]);
printk397drivers/net/eexpress.cprintk(version);
printk485drivers/net/eexpress.cprintk("%s: transmit timed out, %s?  ", dev->name,
printk491drivers/net/eexpress.cif (net_debug > 1) printk("Resetting board.\n");
printk496drivers/net/eexpress.cif (net_debug > 1) printk("Kicking board.\n");
printk524drivers/net/eexpress.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk558drivers/net/eexpress.cprintk ("net_interrupt(): irq %d for unknown device.\n", irq);
printk569drivers/net/eexpress.cprintk("%s: EExp interrupt, status %4.4x.\n", dev->name, status);
printk581drivers/net/eexpress.cif (net_debug > 5)  printk("Couldn't reap %#x.\n", lp->tx_reap);
printk597drivers/net/eexpress.cprintk("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status);
printk607drivers/net/eexpress.cprintk("Received packet, rx_head %04x.\n", lp->rx_head);
printk616drivers/net/eexpress.cprintk("%s: Command unit stopped, status %04x, restarting.\n",
printk629drivers/net/eexpress.cprintk("%s: Rx unit stopped, status %04x, restarting.\n",
printk641drivers/net/eexpress.cprintk("%s: EExp exiting interrupt, status %4.4x.\n", dev->name,
printk800drivers/net/eexpress.cprintk("%s: i82586 initialization timed out with status %04x, cmd %04x.\n",
printk811drivers/net/eexpress.cprintk("%s: Initialized 82586, status %04x.\n", dev->name,
printk898drivers/net/eexpress.cprintk("%s: EExp @%x send length = %d, tx_block %3x, next %3x, "
printk932drivers/net/eexpress.cprintk("%s: Rx frame at %#x corrupted, status %04x cmd %04x"
printk953drivers/net/eexpress.cprintk("%s: Memory squeeze, dropping packet.\n", dev->name);
printk986drivers/net/eexpress.cprintk("%s: Rx next frame at %#x is %#x instead of %#x.\n", dev->name,
printk999drivers/net/eexpress.cprintk("%s: Rx buf link mismatch, at %04x link %04x instead of %04x.\n",
printk114drivers/net/hp.cprintk("%s: %s at %#3x,", dev->name, ei_status.name, ioaddr);
printk117drivers/net/hp.cprintk(" %2.2x", station_addr[i] = inb(ioaddr + i));
printk136drivers/net/hp.cprintk(" selecting IRQ %d.\n", dev->irq);
printk142drivers/net/hp.cprintk(" no free IRQ lines.\n");
printk149drivers/net/hp.cprintk (" unable to get IRQ %d.\n", dev->irq);
printk159drivers/net/hp.cprintk(version);
printk175drivers/net/hp.cif (ei_debug > 1) printk("resetting the 8390 time=%d...", jiffies);
printk186drivers/net/hp.cprintk("jiffy failure (t=%d)...", jiffies);
printk194drivers/net/hp.cprintk("%s: hp_reset_8390() did not complete.\n", dev->name);
printk197drivers/net/hp.cif (ei_debug > 1) printk("8390 reset done (%d).", jiffies);
printk233drivers/net/hp.cprintk("%s: RX transfer address mismatch, %#4.4x vs. %#4.4x (actual).\n",
printk290drivers/net/hp.cprintk("%s: TX Transfer address mismatch, %#4.4x vs. %#4.4x.\n",
printk227drivers/net/lance.cprintk("lance_init(%#x, %#x).\n", mem_start, mem_end);
printk267drivers/net/lance.cprintk("%s: LANCE at %#3x,", dev->name, ioaddr);
printk272drivers/net/lance.cprintk(" %2.2x", dev->dev_addr[i] = inb(ioaddr + i));
printk287drivers/net/lance.cprintk(" **ERROR** LANCE Rx and Tx rings not on even boundary.\n");
printk296drivers/net/lance.cprintk(lp->old_lance ? " original LANCE (%04x)" : " PCnet-ISA LANCE (%04x)",
printk320drivers/net/lance.cprintk(" HP J2405A IRQ %d DMA %d.\n", dev->irq, dev->dma);
printk339drivers/net/lance.cprintk(", probed IRQ %d, fixed at DMA %d.\n", dev->irq, dev->dma);
printk341drivers/net/lance.cprintk(", failed to detect IRQ line.\n");
printk345drivers/net/lance.cprintk(" assigned IRQ %d DMA %d.\n", dev->irq, dev->dma);
printk356drivers/net/lance.cprintk(version);
printk406drivers/net/lance.cprintk("%s: lance_open() irq %d dma %d tx/rx rings %#x/%#x init %#x.\n",
printk433drivers/net/lance.cprintk("%s: LANCE open after %d ticks, init block %#x csr0 %4.4x.\n",
printk481drivers/net/lance.cprintk("%s: transmit timed out, status %4.4x, resetting.\n",
printk488drivers/net/lance.cprintk(" Ring data dump: dirty_tx %d cur_tx %d cur_rx %d.",
printk491drivers/net/lance.cprintk("%s %08x %04x %04x", i & 0x3 ? "" : "\n ",
printk495drivers/net/lance.cprintk(" %s%08x %04x %04x", i & 0x3 ? "" : "\n ",
printk498drivers/net/lance.cprintk("\n");
printk528drivers/net/lance.cprintk("%s: lance_start_xmit() called, csr0 %4.4x.\n", dev->name,
printk536drivers/net/lance.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk559drivers/net/lance.cprintk("%s: bouncing a high-memory packet (%#x).\n",
printk593drivers/net/lance.cprintk ("lance_interrupt(): irq %d for unknown device.\n", irq);
printk600drivers/net/lance.cprintk("%s: Re-entering the interrupt handler.\n", dev->name);
printk611drivers/net/lance.cprintk("%s: interrupt  csr0=%#2.2x new csr=%#2.2x.\n",
printk667drivers/net/lance.cprintk("out-of-sync dirty pointer, %d vs. %d.\n",
printk684drivers/net/lance.cprintk("%s: exiting interrupt, csr%d=%#4.4x.\n",
printk716drivers/net/lance.cprintk("%s: Memory squeeze, deferring packet.\n", dev->name);
printk765drivers/net/lance.cprintk("%s: Shutting down ethercard, status was %2.2x.\n",
printk127drivers/net/ne.cprintk("NE*000 ethercard probe at %#3x:", ioaddr);
printk174drivers/net/ne.cprintk(" %2.2x", SA_prom[i]);
printk178drivers/net/ne.cprintk(" %2.2x", SA_prom[i]);
printk202drivers/net/ne.cprintk(" not found.\n");
printk215drivers/net/ne.cprintk(" autoirq is %d", dev->irq);
printk226drivers/net/ne.cprintk (" unable to get IRQ %d (irqval=%d).\n", dev->irq, irqval);
printk238drivers/net/ne.cprintk("\n%s: %s found at %#x, using IRQ %d.\n",
printk242drivers/net/ne.cprintk(version);
printk270drivers/net/ne.cif (ei_debug > 1) printk("resetting the 8390 t=%d...", jiffies);
printk277drivers/net/ne.cprintk("%s: ne_reset_8390() did not complete.\n", dev->name);
printk295drivers/net/ne.cprintk("%s: DMAing conflict in ne_block_input."
printk331drivers/net/ne.cprintk("%s: RX transfer address mismatch,"
printk353drivers/net/ne.cprintk("%s: DMAing conflict in ne_block_output."
printk406drivers/net/ne.cprintk("%s: Tx packet transfer address mismatch,"
printk74drivers/net/net_init.cprintk("WARNING: Unable to get major %d for the network devices.\n",
printk110drivers/net/plip.c#define PRINTK(x) printk x
printk115drivers/net/plip.c#define PRINTK2(x) printk x
printk183drivers/net/plip.cprintk(version), version_shown++;
printk213drivers/net/plip.cprintk("%s: configured for parallel port at %#3x, IRQ %d.\n",
printk272drivers/net/plip.cprintk("%s: transmit timed out\n", dev->name);
printk505drivers/net/plip.cprintk("%s: rcv buff full.\n", dev->name);
printk635drivers/net/plip.cprintk("%s: packet too big, %d.\n", dev->name, length);
printk172drivers/net/skeleton.cprintk("%s: %s found at %#3x, IRQ %d.\n", dev->name,
printk188drivers/net/skeleton.cprintk(" autoirq is %d", dev->irq);
printk196drivers/net/skeleton.cprintk ("%s: unable to get IRQ %d (irqval=%d).\n", dev->name,
printk207drivers/net/skeleton.cprintk(version);
printk302drivers/net/skeleton.cprintk("%s: transmit timed out, %s?\n", dev->name,
printk330drivers/net/skeleton.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk359drivers/net/skeleton.cprintk ("net_interrupt(): irq %d for unknown device.\n", irq);
printk415drivers/net/skeleton.cprintk("%s: Memory squeeze, dropping packet.\n", dev->name);
printk626drivers/net/slhc.cif (inet_debug == DBG_SLIP) printk("\runcomp: change %x len %d\n", changes, len);
printk703drivers/net/slhc.cprintk("\t%ld Cmp, %ld Uncmp, %ld Bad, %ld Tossed\n",
printk715drivers/net/slhc.cprintk("\t%ld Cmp, %ld Uncmp, %ld AsIs, %ld NotTCP\n",
printk720drivers/net/slhc.cprintk("\t%10ld Searches, %10ld Misses\n",
printk89drivers/net/slip.cprintk("\r%s -> %s seq %lx ack %lx len %d\n",
printk94drivers/net/slip.cprintk("\r*****\n");
printk95drivers/net/slip.cprintk("%p %d\n", ptr, len);
printk101drivers/net/slip.cprintk("SLIP: %s->", in_ntoa(ip->saddr));
printk102drivers/net/slip.cprintk("%s\n", in_ntoa(ip->daddr));
printk103drivers/net/slip.cprintk(" len %u ihl %u ver %u ttl %u prot %u",
printk106drivers/net/slip.cif (ip->tos != 0) printk(" tos %u", ip->tos);
printk108drivers/net/slip.cprintk(" id %u offs %u", ntohs(ip->id), doff);
printk110drivers/net/slip.cif (ntohs(ip->frag_off) & IPF_DF) printk(" DF");
printk111drivers/net/slip.cif (ntohs(ip->frag_off) & IPF_MF) printk(" MF");
printk112drivers/net/slip.cprintk("\n*****\n");
printk121drivers/net/slip.cprintk("%d:", len);
printk123drivers/net/slip.cprintk(" %x", *cp++);
printk126drivers/net/slip.cprintk("\n\n");
printk240drivers/net/slip.cprintk("Unable to grow slip buffers. MTU change cancelled.\n");
printk429drivers/net/slip.cprintk("slip: truncating oversized transmit packet!\n");
printk567drivers/net/slip.cprintk("AX25 Encap: Non IP frame to encapsulate directed\n");
printk790drivers/net/slip.cprintk ("SLIP: received wrong character\n");
printk1015drivers/net/slip.cprintk("rbuff %02x %02x %02x %02x\n",
printk1125drivers/net/slip.cprintk("SLIP: version %s (%d channels)\n",
printk1127drivers/net/slip.cprintk("CSLIP: code copyright 1989 Regents of the University of California\n");
printk1129drivers/net/slip.cprintk("AX25: KISS encapsulation enabled\n");
printk1141drivers/net/slip.cprintk("ERROR: %d\n", i);
printk99drivers/net/smc-ultra.cprintk("%s: SMC Ultra at %#3x,", dev->name, ioaddr);
printk101drivers/net/smc-ultra.cprintk(" %2.2X", station_addr[i] = inb(ioaddr + 8 + i));
printk117drivers/net/smc-ultra.cprintk(", failed to detect IRQ line.\n");
printk152drivers/net/smc-ultra.cprintk(",%s IRQ %d memory %#x-%#x.\n", eeprom_irq ? "" : "assigned ",
printk155drivers/net/smc-ultra.cprintk(version);
printk189drivers/net/smc-ultra.cif (ei_debug > 1) printk("resetting Ultra, t=%d...", jiffies);
printk194drivers/net/smc-ultra.cif (ei_debug > 1) printk("reset done\n");
printk240drivers/net/smc-ultra.cprintk("%s: Shutting down ethercard.\n", dev->name);
printk105drivers/net/wd.cprintk("%s: WD80x3 at %#3x, ", dev->name, ioaddr);
printk107drivers/net/wd.cprintk(" %2.2X", station_addr[i] = inb(ioaddr + 8 + i));
printk159drivers/net/wd.cprintk("\nWD80?3: Bus width conflict, %d (probe) != %d (reg report).",
printk174drivers/net/wd.cprintk(" assigning address %#lx", dev->mem_start);
printk209drivers/net/wd.cprintk(" autoirq is %d", dev->irq);
printk220drivers/net/wd.cprintk (" unable to get IRQ %d.\n", dev->irq);
printk239drivers/net/wd.cprintk(" %s, IRQ %d, shared memory at %#lx-%#lx.\n",
printk242drivers/net/wd.cprintk(version);
printk277drivers/net/wd.cif (ei_debug > 1) printk("resetting the WD80x3 t=%lu...", jiffies);
printk285drivers/net/wd.cif (ei_debug > 1) printk("reset done\n");
printk349drivers/net/wd.cprintk("%s: Shutting down ethercard.\n", dev->name);
printk312drivers/scsi/NCR5380.cprintk(" %s", signals[i].name);
printk315drivers/scsi/NCR5380.cprintk(" %s", basrs[i].name);
printk318drivers/scsi/NCR5380.cprintk(" %s", icrs[i].name);
printk321drivers/scsi/NCR5380.cprintk(" %s", mrs[i].name);
printk322drivers/scsi/NCR5380.cprintk("\n");
printk349drivers/scsi/NCR5380.cprintk("scsi%d : REQ not asserted, phase unknown.\n", 
printk354drivers/scsi/NCR5380.cprintk("scsi%d : phase %s\n", instance->host_no, phases[i].name);
printk530drivers/scsi/NCR5380.cprintk("scsi : NCR5380_all_init()\n");
printk617drivers/scsi/NCR5380.cprintk(" generic options"
printk644drivers/scsi/NCR5380.cprintk(" USLEEP, USLEEP_POLL=%d USLEEP_SLEEP=%d", USLEEP_POLL, USLEEP_SLEEP);
printk646drivers/scsi/NCR5380.cprintk(" generic release=%d", NCR5380_PUBLIC_RELEASE);
printk697drivers/scsi/NCR5380.cprintk("scsi%d : WARNING : support for multiple outstanding commands enabled\n"
printk739drivers/scsi/NCR5380.cprintk("scsi%d : WRITE attempted with NO_WRITE debugging flag set\n",
printk776drivers/scsi/NCR5380.cprintk("scsi%d : command added to %s of queue\n", instance->host_no,
printk824drivers/scsi/NCR5380.cprintk("scsi%d : not connected\n", instance->host_no);
printk852drivers/scsi/NCR5380.cprintk("scsi%d : main() : command for target %d lun %d removed from issue_queue\n",
printk873drivers/scsi/NCR5380.cprintk("scsi%d : main(): select() failed, returned to issue_queue\n",
printk890drivers/scsi/NCR5380.cprintk("scsi%d : main() : performing information transfer\n",
printk895drivers/scsi/NCR5380.cprintk("scsi%d : main() : done set false\n", instance->host_no);
printk921drivers/scsi/NCR5380.cprintk("scsi : NCR5380 irq %d triggered\n", irq);
printk941drivers/scsi/NCR5380.cprintk("scsi%d : SEL interrupt\n", instance->host_no);
printk948drivers/scsi/NCR5380.cprintk("scsi%d : PARITY interrupt\n", instance->host_no);
printk960drivers/scsi/NCR5380.cprintk("scsi : unknown interrupt\n");
printk1015drivers/scsi/NCR5380.cprintk("scsi%d : starting arbitration, id = %d\n", instance->host_no,
printk1034drivers/scsi/NCR5380.cprintk("scsi%d : arbitration complete\n", instance->host_no);
printk1054drivers/scsi/NCR5380.cprintk("scsi%d : lost arbitration, deasserting MR_ARBITRATE\n", 
printk1066drivers/scsi/NCR5380.cprintk("scsi%d : lost arbitration, deasserting ICR_ASSERT_SEL\n", 
printk1080drivers/scsi/NCR5380.cprintk("scsi%d : won arbitration\n", instance->host_no);
printk1127drivers/scsi/NCR5380.cprintk("scsi%d : selecting target %d\n", instance->host_no, cmd->target);
printk1153drivers/scsi/NCR5380.cprintk("scsi%d : target did not respond within 250ms\n", 
printk1178drivers/scsi/NCR5380.cprintk("scsi%d : target %d selected, going into MESSAGE OUT phase.\n",
printk1210drivers/scsi/NCR5380.cprintk("scsi%d : nexus established.\n", instance->host_no);
printk1273drivers/scsi/NCR5380.cprintk("scsi%d : REQ detected\n", instance->host_no);
printk1279drivers/scsi/NCR5380.cprintk("scsi%d : phase mismatch\n", instance->host_no);
printk1328drivers/scsi/NCR5380.cprintk("scsi%d : req false, handshake complete\n", instance->host_no);
printk1338drivers/scsi/NCR5380.cprintk("scsi%d : residual %d\n", instance->host_no, c);
printk1485drivers/scsi/NCR5380.cprintk("scsi%d : NDEBUG_NO_DATAOUT set, attempted DATAOUT aborted\n",
printk1502drivers/scsi/NCR5380.cprintk("scsi%d : %d bytes and %d buffers left\n",
printk1529drivers/scsi/NCR5380.cprintk("scsi%d : switching target %d lun %d to slow handshake\n",
printk1571drivers/scsi/NCR5380.cprintk("scsi%d : target %d lun %d linked command complete.\n",
printk1581drivers/scsi/NCR5380.cprintk("scsi%d : target %d lun %d linked command complete, no next_link\n"
printk1594drivers/scsi/NCR5380.cprintk("scsi%d : target %d lun %d linked request done, calling scsi_done().\n",
printk1605drivers/scsi/NCR5380.cprintk("scsi%d : command for target %d, lun %d completed\n",
printk1623drivers/scsi/NCR5380.cprintk("scsi%d : performing request sense\n", 
printk1644drivers/scsi/NCR5380.cprintk("scsi%d : REQUEST SENSE added to head of issue queue\n");
printk1672drivers/scsi/NCR5380.cprintk("scsi%d : command for target %d lun %d was moved from connected to"
printk1740drivers/scsi/NCR5380.cprintk("scsi%d : issued command, sleeping until %ul\n", instance->host_no,
printk1755drivers/scsi/NCR5380.cprintk("scsi%d : unknown phase\n", instance->host_no);
printk1767drivers/scsi/NCR5380.cprintk("scsi%d : poll timed out, sleeping until %ul\n", instance->host_no,
printk1809drivers/scsi/NCR5380.cprintk("scsi%d : reselect\n", instance->host_no);
printk1857drivers/scsi/NCR5380.cprintk("scsi%d : expecting IDENTIFY message, got ",
printk1887drivers/scsi/NCR5380.cprintk("scsi%d : warning : target bitmask %02x lun %d tag %d not in disconnect_queue.\n",
printk1890drivers/scsi/NCR5380.cprintk("scsi%d : warning : target bitmask %02x lun %d not in disconnect_queue.\n",
printk1911drivers/scsi/NCR5380.cprintk"scsi%d : nexus established, target = %d, lun = %d, tag = %d\n",
printk1998drivers/scsi/NCR5380.cprintk("scsi%d : abort called\n", instance->host_no);
printk2014drivers/scsi/NCR5380.cprintk("scsi%d : abort removed command from issue queue.\n", 
printk2035drivers/scsi/NCR5380.cprintk("scsi%d : abort failed, command connected.\n", instance->host_no);
printk2070drivers/scsi/NCR5380.cprintk("scsi%d : aborting disconnected command.\n", instance->host_no);
printk2077drivers/scsi/NCR5380.cprintk("scsi%d : nexus restablished.\n", instance->host_no);
printk2113drivers/scsi/NCR5380.cprintk("scsi%d : warning : SCSI command probably completed successfully\n"
printk440drivers/scsi/aha152x.cprintk("aha152x: RESET IN\n");
printk512drivers/scsi/aha152x.cprintk("aha152x: Probing: ");
printk516drivers/scsi/aha152x.cprintk("processing commandline: ");
printk520drivers/scsi/aha152x.cprintk("\naha152x: %s\n", setup_str );
printk521drivers/scsi/aha152x.cprintk("aha152x: usage: aha152x=<PORTBASE>,<IRQ>,<SCSI ID>,<RECONNECT>\n");
printk535drivers/scsi/aha152x.cprintk("unknown portbase 0x%03x\n", port_base);
printk541drivers/scsi/aha152x.cprintk("portbase 0x%03x fails probe\n", port_base);
printk550drivers/scsi/aha152x.cprintk("illegal IRQ %d\n", interrupt_level);
printk556drivers/scsi/aha152x.cprintk("illegal SCSI ID %d\n", this_host);
printk562drivers/scsi/aha152x.cprintk("reconnect %d should be 0 or 1\n", can_disconnect);
printk565drivers/scsi/aha152x.cprintk("ok, ");
printk570drivers/scsi/aha152x.cprintk("BIOS test: ");
printk583drivers/scsi/aha152x.cprintk("failed\n");
printk586drivers/scsi/aha152x.cprintk("ok, ");
printk590drivers/scsi/aha152x.cprintk("porttest: ");
printk596drivers/scsi/aha152x.cprintk("failed\n");
printk604drivers/scsi/aha152x.cprintk("ok, ");
printk617drivers/scsi/aha152x.cprintk("auto configuration: ok, ");
printk634drivers/scsi/aha152x.cprintk("detection complete\n");
printk647drivers/scsi/aha152x.cprintk("aha152x: bad IRQ %d.\n", interrupt_level);
printk648drivers/scsi/aha152x.cprintk("         Contact author.\n");
printk652drivers/scsi/aha152x.cprintk( "aha152x: IRQ %d already in use. Configure another.\n",
printk656drivers/scsi/aha152x.cprintk( "\naha152x: Unexpected error code on requesting IRQ %d.\n",
printk658drivers/scsi/aha152x.cprintk("         Contact author.\n");
printk677drivers/scsi/aha152x.cprintk("aha152x: vital data: PORTBASE=0x%03x, IRQ=%d, SCSI ID=%d, reconnect=%s, parity=enabled\n",
printk704drivers/scsi/aha152x.cprintk("\naha152x: info()\n");
printk719drivers/scsi/aha152x.cprintk("aha152x: queue(), ");
printk725drivers/scsi/aha152x.cprintk( "SCpnt (target = %d lun = %d cmnd = 0x%02x pieces = %d size = %u), ",
printk770drivers/scsi/aha152x.cprintk("i+ (%d), ", commands );
printk790drivers/scsi/aha152x.cprintk( "aha152x: interrupt driven driver; use aha152x_queue()\n" );
printk805drivers/scsi/aha152x.cprintk("aha152x: abort(), SCpnt=0x%08x, ", (unsigned long) SCpnt );
printk845drivers/scsi/aha152x.cprintk("bus busy but no current command, ");
printk877drivers/scsi/aha152x.cprintk("aha152x: bus busy but no current command\n");
printk934drivers/scsi/aha152x.cprintk("aha152x: reset(), bus not free: SCSI RESET OUT\n");
printk980drivers/scsi/aha152x.cprintk("\naha152x: biosparam(), ");
printk985drivers/scsi/aha152x.cprintk("dev=%x, size=%d, ", dev, size);
printk995drivers/scsi/aha152x.cprintk("bios geometry: head=%d, sec=%d, cyl=%d\n",
printk997drivers/scsi/aha152x.cprintk("WARNING: check, if the bios geometry is correct.\n");
printk1014drivers/scsi/aha152x.cprintk("\naha152x: done(), ");
printk1021drivers/scsi/aha152x.cprintk("done(%x), ", error);
printk1035drivers/scsi/aha152x.cprintk("ok (%d), ", commands);
printk1043drivers/scsi/aha152x.cprintk("BUS FREE loop, ");
printk1048drivers/scsi/aha152x.cprintk("BUS FREE\n");
printk1055drivers/scsi/aha152x.cprintk("calling scsi_done, ");
printk1059drivers/scsi/aha152x.cprintk("done returned, ");
printk1080drivers/scsi/aha152x.cprintk("\naha152x: intr(), ");
printk1107drivers/scsi/aha152x.cprintk("i+, ");
printk1121drivers/scsi/aha152x.cprintk("reselected, ");
printk1133drivers/scsi/aha152x.cprintk("SELID=%02x, target=%d, ", GETPORT(SELID), target );
printk1146drivers/scsi/aha152x.cprintk("target doesn't enter MSGI to identify (phase=%02x)\n", i);
printk1157drivers/scsi/aha152x.cprintk("target=%d, inbound message (%02x) != IDENTIFY\n",
printk1166drivers/scsi/aha152x.cprintk("identify=%02x, lun=%d, ", identify_msg, identify_msg & 0x3f );
printk1171drivers/scsi/aha152x.cprintk("d-, ");
printk1179drivers/scsi/aha152x.cprintk("lun=%d, ", identify_msg & 0x3f );
printk1203drivers/scsi/aha152x.cprintk("i-, ");
printk1209drivers/scsi/aha152x.cprintk("issueing command, ");
printk1214drivers/scsi/aha152x.cprintk("selecting %d, ", current_SC->target); 
printk1236drivers/scsi/aha152x.cprintk("aha152x: ignoring spurious interrupt, nothing to do\n");
printk1265drivers/scsi/aha152x.cprintk("aha152x: passing bus free condition\n");
printk1282drivers/scsi/aha152x.cprintk("SELDO (SELID=%x), ", GETPORT(SELID));
printk1290drivers/scsi/aha152x.cprintk("(ABORT) target selected, ");
printk1312drivers/scsi/aha152x.cprintk("SELTO, ");
printk1330drivers/scsi/aha152x.cprintk("(ABORT) selection timeout, ");
printk1362drivers/scsi/aha152x.cprintk("MESSAGE OUT, ");
printk1368drivers/scsi/aha152x.cprintk("ABORT, ");
printk1380drivers/scsi/aha152x.cprintk("IDENTIFY (reconnect=%s;lun=%d), ", 
printk1388drivers/scsi/aha152x.cprintk("REJECT, ");
printk1436drivers/scsi/aha152x.cprintk("COMMAND, ");
printk1441drivers/scsi/aha152x.cprintk("aha152x: P_CMD: %d(%d) bytes left in FIFO, resetting\n",
printk1457drivers/scsi/aha152x.cprintk("waiting, ");
printk1467drivers/scsi/aha152x.cprintk("DFIFOEMP, outsw (%d words), ",
printk1477drivers/scsi/aha152x.cprintk("FCNT=%d, STCNT=%d, ", GETPORT(FIFOSTAT), GETSTCNT() );
printk1494drivers/scsi/aha152x.cprintk("sent %d/%d command bytes, ", GETSTCNT(),
printk1505drivers/scsi/aha152x.cprintk("MESSAGE IN, ");
printk1519drivers/scsi/aha152x.cprintk("target disconnected, ");
printk1529drivers/scsi/aha152x.cprintk("inbound message ( COMMAND COMPLETE ), ");
printk1536drivers/scsi/aha152x.cprintk("inbound message ( MESSAGE REJECT ), ");
printk1542drivers/scsi/aha152x.cprintk("inbound message ( SAVE DATA POINTERS ), ");
printk1551drivers/scsi/aha152x.cprintk("inbound message ( EXTENDED MESSAGE ), ");
printk1560drivers/scsi/aha152x.cprintk("length (%d), ", i);
printk1564drivers/scsi/aha152x.cprintk("code ( ");
printk1577drivers/scsi/aha152x.cprintk("MODIFY DATA POINTER ");
printk1583drivers/scsi/aha152x.cprintk("SYNCHRONOUS DATA TRANSFER REQUEST ");
printk1589drivers/scsi/aha152x.cprintk("EXTENDED IDENTIFY ");
printk1594drivers/scsi/aha152x.cprintk("WIDE DATA TRANSFER REQUEST ");
printk1601drivers/scsi/aha152x.cprintk("reserved (%d) ", code );
printk1603drivers/scsi/aha152x.cprintk("vendor specific (%d) ", code);
printk1609drivers/scsi/aha152x.cprintk(" ), data ( ");
printk1614drivers/scsi/aha152x.cprintk("%x ", GETPORT(SCSIBUS) );
printk1620drivers/scsi/aha152x.cprintk(" ), ");
printk1631drivers/scsi/aha152x.cprintk("unsupported inbound message %x, ", current_SC->SCp.Message);
printk1648drivers/scsi/aha152x.cprintk("d+, ");
printk1666drivers/scsi/aha152x.cprintk("STATUS, ");
printk1674drivers/scsi/aha152x.cprintk("aha152x: passing STATUS phase");
printk1681drivers/scsi/aha152x.cprintk("inbound status ");
printk1683drivers/scsi/aha152x.cprintk(", ");
printk1692drivers/scsi/aha152x.cprintk("DATA IN, ");
printk1696drivers/scsi/aha152x.cprintk("aha152x: P_DATAI: %d(%d) bytes left in FIFO, resetting\n",
printk1715drivers/scsi/aha152x.cprintk("expecting data, ");
printk1732drivers/scsi/aha152x.cprintk("last transfer, ");
printk1738drivers/scsi/aha152x.cprintk("fifodata=%d, ", fifodata);
printk1752drivers/scsi/aha152x.cprintk("data_count=%d, ", data_count);
printk1774drivers/scsi/aha152x.cprintk("data on last transfer (%d bytes: ",
printk1778drivers/scsi/aha152x.cprintk("%2x ", *data++);
printk1779drivers/scsi/aha152x.cprintk("), ");
printk1805drivers/scsi/aha152x.cprintk("aha152x: more data than expected (%d bytes)\n",
printk1811drivers/scsi/aha152x.cprintk("fifo empty, ");
printk1813drivers/scsi/aha152x.cprintk("something left in fifo, ");
printk1819drivers/scsi/aha152x.cprintk("left buffers (buffers=%d, bytes=%d), ",
printk1830drivers/scsi/aha152x.cprintk("got %d bytes, ", GETSTCNT());
printk1842drivers/scsi/aha152x.cprintk("DATA OUT, ");
printk1845drivers/scsi/aha152x.cprintk("got data to send (bytes=%d, buffers=%d), ",
printk1852drivers/scsi/aha152x.cprintk("%d(%d) left in FIFO, ", GETPORT(FIFOSTAT), GETPORT(SSTAT2) & (SFULL|SFCNT) );
printk1872drivers/scsi/aha152x.cprintk("sending data (left: bytes=%d, buffers=%d), waiting, ",
printk1881drivers/scsi/aha152x.cprintk("data_count=%d, ", data_count);
printk1905drivers/scsi/aha152x.cprintk("fifo (%d bytes), transfered (%d bytes), ",
printk1937drivers/scsi/aha152x.cprintk("left data (bytes=%d, buffers=%d), fifos (bytes=%d), transfer incomplete, resetting fifo, ",
printk1949drivers/scsi/aha152x.cprintk("waiting for SCSI fifo to get empty, ");
printk1955drivers/scsi/aha152x.cprintk("ok, ");
printk1959drivers/scsi/aha152x.cprintk("left data (bytes=%d, buffers=%d) ",
printk1973drivers/scsi/aha152x.cprintk("sent %d data bytes, ", GETSTCNT() );
printk1983drivers/scsi/aha152x.cprintk("unexpected BUS FREE, ");
printk1995drivers/scsi/aha152x.cprintk("PARITY error in DATA phase, ");
printk2005drivers/scsi/aha152x.cprintk("aha152x: unexpected phase\n");
printk2012drivers/scsi/aha152x.cprintk("command done.\n");
printk2029drivers/scsi/aha152x.cprintk("done returned (DID_OK: Status=%x; Message=%x).\n",
printk2056drivers/scsi/aha152x.cprintk("\naha152x_panic: %s\n", msg);
printk2069drivers/scsi/aha152x.cprintk("\n%s: ", current_SC ? "on bus" : "waiting");
printk2072drivers/scsi/aha152x.cprintk("SCSISEQ ( ");
printk2073drivers/scsi/aha152x.cif( s & TEMODEO )     printk("TARGET MODE ");
printk2074drivers/scsi/aha152x.cif( s & ENSELO )      printk("SELO ");
printk2075drivers/scsi/aha152x.cif( s & ENSELI )      printk("SELI ");
printk2076drivers/scsi/aha152x.cif( s & ENRESELI )    printk("RESELI ");
printk2077drivers/scsi/aha152x.cif( s & ENAUTOATNO )  printk("AUTOATNO ");
printk2078drivers/scsi/aha152x.cif( s & ENAUTOATNI )  printk("AUTOATNI ");
printk2079drivers/scsi/aha152x.cif( s & ENAUTOATNP )  printk("AUTOATNP ");
printk2080drivers/scsi/aha152x.cif( s & SCSIRSTO )    printk("SCSIRSTO ");
printk2081drivers/scsi/aha152x.cprintk(");");
printk2083drivers/scsi/aha152x.cprintk(" SCSISIG ( ");
printk2088drivers/scsi/aha152x.cprintk("DATA OUT");
printk2091drivers/scsi/aha152x.cprintk("DATA IN");
printk2094drivers/scsi/aha152x.cprintk("COMMAND"); 
printk2097drivers/scsi/aha152x.cprintk("STATUS"); 
printk2100drivers/scsi/aha152x.cprintk("MESSAGE OUT");
printk2103drivers/scsi/aha152x.cprintk("MESSAGE IN");
printk2106drivers/scsi/aha152x.cprintk("*illegal*");
printk2110drivers/scsi/aha152x.cprintk(" ); ");
printk2112drivers/scsi/aha152x.cprintk("INTSTAT ( %s ); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo");
printk2114drivers/scsi/aha152x.cprintk("SSTAT ( ");
printk2116drivers/scsi/aha152x.cif( s & TARGET )   printk("TARGET ");
printk2117drivers/scsi/aha152x.cif( s & SELDO )    printk("SELDO ");
printk2118drivers/scsi/aha152x.cif( s & SELDI )    printk("SELDI ");
printk2119drivers/scsi/aha152x.cif( s & SELINGO )  printk("SELINGO ");
printk2120drivers/scsi/aha152x.cif( s & SWRAP )    printk("SWRAP ");
printk2121drivers/scsi/aha152x.cif( s & SDONE )    printk("SDONE ");
printk2122drivers/scsi/aha152x.cif( s & SPIORDY )  printk("SPIORDY ");
printk2123drivers/scsi/aha152x.cif( s & DMADONE )  printk("DMADONE ");
printk2126drivers/scsi/aha152x.cif( s & SELTO )     printk("SELTO ");
printk2127drivers/scsi/aha152x.cif( s & ATNTARG )   printk("ATNTARG ");
printk2128drivers/scsi/aha152x.cif( s & SCSIRSTI )  printk("SCSIRSTI ");
printk2129drivers/scsi/aha152x.cif( s & PHASEMIS )  printk("PHASEMIS ");
printk2130drivers/scsi/aha152x.cif( s & BUSFREE )   printk("BUSFREE ");
printk2131drivers/scsi/aha152x.cif( s & SCSIPERR )  printk("SCSIPERR ");
printk2132drivers/scsi/aha152x.cif( s & PHASECHG )  printk("PHASECHG ");
printk2133drivers/scsi/aha152x.cif( s & REQINIT )   printk("REQINIT ");
printk2134drivers/scsi/aha152x.cprintk("); ");
printk2137drivers/scsi/aha152x.cprintk("SSTAT ( ");
printk2141drivers/scsi/aha152x.cif( s & TARGET )    printk("TARGET ");
printk2142drivers/scsi/aha152x.cif( s & SELDO )     printk("SELDO ");
printk2143drivers/scsi/aha152x.cif( s & SELDI )     printk("SELDI ");
printk2144drivers/scsi/aha152x.cif( s & SELINGO )   printk("SELINGO ");
printk2145drivers/scsi/aha152x.cif( s & SWRAP )     printk("SWRAP ");
printk2146drivers/scsi/aha152x.cif( s & SDONE )     printk("SDONE ");
printk2147drivers/scsi/aha152x.cif( s & SPIORDY )   printk("SPIORDY ");
printk2148drivers/scsi/aha152x.cif( s & DMADONE )   printk("DMADONE ");
printk2152drivers/scsi/aha152x.cif( s & SELTO )     printk("SELTO ");
printk2153drivers/scsi/aha152x.cif( s & ATNTARG )   printk("ATNTARG ");
printk2154drivers/scsi/aha152x.cif( s & SCSIRSTI )  printk("SCSIRSTI ");
printk2155drivers/scsi/aha152x.cif( s & PHASEMIS )  printk("PHASEMIS ");
printk2156drivers/scsi/aha152x.cif( s & BUSFREE )   printk("BUSFREE ");
printk2157drivers/scsi/aha152x.cif( s & SCSIPERR )  printk("SCSIPERR ");
printk2158drivers/scsi/aha152x.cif( s & PHASECHG )  printk("PHASECHG ");
printk2159drivers/scsi/aha152x.cif( s & REQINIT )   printk("REQINIT ");
printk2160drivers/scsi/aha152x.cprintk("); ");
printk2162drivers/scsi/aha152x.cprintk("SXFRCTL0 ( ");
printk2165drivers/scsi/aha152x.cif( s & SCSIEN )    printk("SCSIEN ");
printk2166drivers/scsi/aha152x.cif( s & DMAEN )     printk("DMAEN ");
printk2167drivers/scsi/aha152x.cif( s & CH1 )       printk("CH1 ");
printk2168drivers/scsi/aha152x.cif( s & CLRSTCNT )  printk("CLRSTCNT ");
printk2169drivers/scsi/aha152x.cif( s & SPIOEN )    printk("SPIOEN ");
printk2170drivers/scsi/aha152x.cif( s & CLRCH1 )    printk("CLRCH1 ");
printk2171drivers/scsi/aha152x.cprintk("); ");
printk2173drivers/scsi/aha152x.cprintk("SIGNAL ( ");
printk2176drivers/scsi/aha152x.cif( s & ATNI )  printk("ATNI ");
printk2177drivers/scsi/aha152x.cif( s & SELI )  printk("SELI ");
printk2178drivers/scsi/aha152x.cif( s & BSYI )  printk("BSYI ");
printk2179drivers/scsi/aha152x.cif( s & REQI )  printk("REQI ");
printk2180drivers/scsi/aha152x.cif( s & ACKI )  printk("ACKI ");
printk2181drivers/scsi/aha152x.cprintk("); ");
printk2183drivers/scsi/aha152x.cprintk("SELID ( %02x ), ", GETPORT(SELID) );
printk2185drivers/scsi/aha152x.cprintk("SSTAT2 ( ");
printk2188drivers/scsi/aha152x.cif( s & SOFFSET)  printk("SOFFSET ");
printk2189drivers/scsi/aha152x.cif( s & SEMPTY)   printk("SEMPTY ");
printk2190drivers/scsi/aha152x.cif( s & SFULL)    printk("SFULL ");
printk2191drivers/scsi/aha152x.cprintk("); SFCNT ( %d ); ", s & (SFULL|SFCNT) );
printk2194drivers/scsi/aha152x.cprintk("SSTAT4 ( ");
printk2196drivers/scsi/aha152x.cif( s & SYNCERR)   printk("SYNCERR ");
printk2197drivers/scsi/aha152x.cif( s & FWERR)     printk("FWERR ");
printk2198drivers/scsi/aha152x.cif( s & FRERR)     printk("FRERR ");
printk2199drivers/scsi/aha152x.cprintk("); ");
printk2202drivers/scsi/aha152x.cprintk("FCNT ( %d ); ", GETPORT(FIFOSTAT) );
printk2204drivers/scsi/aha152x.cprintk("DMACNTRL0 ( ");
printk2206drivers/scsi/aha152x.cprintk( "%s ", s & _8BIT      ? "8BIT"  : "16BIT" );
printk2207drivers/scsi/aha152x.cprintk( "%s ", s & DMA        ? "DMA"   : "PIO"   );
printk2208drivers/scsi/aha152x.cprintk( "%s ", s & WRITE_READ ? "WRITE" : "READ"  );
printk2209drivers/scsi/aha152x.cif( s & ENDMA )    printk("ENDMA ");
printk2210drivers/scsi/aha152x.cif( s & INTEN )    printk("INTEN ");
printk2211drivers/scsi/aha152x.cif( s & RSTFIFO )  printk("RSTFIFO ");
printk2212drivers/scsi/aha152x.cif( s & SWINT )    printk("SWINT ");
printk2213drivers/scsi/aha152x.cprintk("); ");
printk2217drivers/scsi/aha152x.cprintk("DMACNTRL1 ( ");
printk2220drivers/scsi/aha152x.cif( s & PWRDWN )    printk("PWRDN ");
printk2221drivers/scsi/aha152x.cprintk("); ");
printk2224drivers/scsi/aha152x.cprintk("STK ( %d ); ", s & 0xf);
printk2226drivers/scsi/aha152x.cprintk("DMASTAT (");
printk2228drivers/scsi/aha152x.cif( s & ATDONE )     printk("ATDONE ");
printk2229drivers/scsi/aha152x.cif( s & WORDRDY )    printk("WORDRDY ");
printk2230drivers/scsi/aha152x.cif( s & DFIFOFULL )  printk("DFIFOFULL ");
printk2231drivers/scsi/aha152x.cif( s & DFIFOEMP )   printk("DFIFOEMP ");
printk2232drivers/scsi/aha152x.cprintk(")");
printk2236drivers/scsi/aha152x.cprintk("\n");
printk2247drivers/scsi/aha152x.cprintk("enabled interrupts ( ");
printk2250drivers/scsi/aha152x.cif( s & ENSELDO )    printk("ENSELDO ");
printk2251drivers/scsi/aha152x.cif( s & ENSELDI )    printk("ENSELDI ");
printk2252drivers/scsi/aha152x.cif( s & ENSELINGO )  printk("ENSELINGO ");
printk2253drivers/scsi/aha152x.cif( s & ENSWRAP )    printk("ENSWRAP ");
printk2254drivers/scsi/aha152x.cif( s & ENSDONE )    printk("ENSDONE ");
printk2255drivers/scsi/aha152x.cif( s & ENSPIORDY )  printk("ENSPIORDY ");
printk2256drivers/scsi/aha152x.cif( s & ENDMADONE )  printk("ENDMADONE ");
printk2259drivers/scsi/aha152x.cif( s & ENSELTIMO )    printk("ENSELTIMO ");
printk2260drivers/scsi/aha152x.cif( s & ENATNTARG )    printk("ENATNTARG ");
printk2261drivers/scsi/aha152x.cif( s & ENPHASEMIS )   printk("ENPHASEMIS ");
printk2262drivers/scsi/aha152x.cif( s & ENBUSFREE )    printk("ENBUSFREE ");
printk2263drivers/scsi/aha152x.cif( s & ENSCSIPERR )   printk("ENSCSIPERR ");
printk2264drivers/scsi/aha152x.cif( s & ENPHASECHG )   printk("ENPHASECHG ");
printk2265drivers/scsi/aha152x.cif( s & ENREQINIT )    printk("ENREQINIT ");
printk2266drivers/scsi/aha152x.cprintk(")\n");
printk2280drivers/scsi/aha152x.cprintk("aha152x: entering %s() (%x)\n", func, jiffies);
printk2283drivers/scsi/aha152x.cprintk("%s should leave first.\n", should_leave);
printk2295drivers/scsi/aha152x.cprintk("\naha152x: leaving %s() (%x)\n", func, jiffies);
printk2298drivers/scsi/aha152x.cprintk("aha152x: %s already left.\n", should_leave);
printk2315drivers/scsi/aha152x.cprintk("0x%08x: target=%d; lun=%d; cmnd=( ",
printk2319drivers/scsi/aha152x.cprintk("%02x ", ptr->cmnd[i]);
printk2321drivers/scsi/aha152x.cprintk("); residual=%d; buffers=%d; phase |",
printk2324drivers/scsi/aha152x.cif( ptr->SCp.phase & not_issued   )  printk("not issued|");
printk2325drivers/scsi/aha152x.cif( ptr->SCp.phase & in_selection )  printk("in selection|");
printk2326drivers/scsi/aha152x.cif( ptr->SCp.phase & disconnected )  printk("disconnected|");
printk2327drivers/scsi/aha152x.cif( ptr->SCp.phase & aborted      )  printk("aborted|");
printk2328drivers/scsi/aha152x.cif( ptr->SCp.phase & sent_ident   )  printk("send_ident|");
printk2331drivers/scsi/aha152x.cprintk("; in other(");
printk2335drivers/scsi/aha152x.cprintk("DATA OUT");
printk2338drivers/scsi/aha152x.cprintk("DATA IN");
printk2341drivers/scsi/aha152x.cprintk("COMMAND");
printk2344drivers/scsi/aha152x.cprintk("STATUS");
printk2347drivers/scsi/aha152x.cprintk("MESSAGE OUT");
printk2350drivers/scsi/aha152x.cprintk("MESSAGE IN");
printk2353drivers/scsi/aha152x.cprintk("*illegal*");
printk2356drivers/scsi/aha152x.cprintk(")");
printk2358drivers/scsi/aha152x.cprintk("; phaseend");
printk2360drivers/scsi/aha152x.cprintk("; next=0x%08x\n", (unsigned long) ptr->host_scribble);
printk2371drivers/scsi/aha152x.cprintk("QUEUE STATUS:\nissue_SC:\n");
printk2375drivers/scsi/aha152x.cprintk("current_SC:\n");
printk2379drivers/scsi/aha152x.cprintk("none\n");
printk2381drivers/scsi/aha152x.cprintk("disconnected_SC:\n");
printk101drivers/scsi/aha1542.cprintk("aha1542_out failed(%d): ", len+1); aha1542_stat();
printk114drivers/scsi/aha1542.cprintk("aha1542_in failed(%d): ", len+1); aha1542_stat();
printk157drivers/scsi/aha1542.cDEB(printk("Aha1542: %x %x\n", hosterr, scsierr));
printk168drivers/scsi/aha1542.cprintk("makecode: unknown hoststatus %x\n", hosterr);
printk273drivers/scsi/aha1542.cprintk("aha1542_intr_handle: ");
printk274drivers/scsi/aha1542.cif (!(flag&ANYINTR)) printk("no interrupt?");
printk275drivers/scsi/aha1542.cif (flag&MBIF) printk("MBIF ");
printk276drivers/scsi/aha1542.cif (flag&MBOA) printk("MBOF ");
printk277drivers/scsi/aha1542.cif (flag&HACC) printk("HACC ");
printk278drivers/scsi/aha1542.cif (flag&SCRD) printk("SCRD ");
printk279drivers/scsi/aha1542.cprintk("status %02x\n", inb(STATUS(shost->io_port)));
printk302drivers/scsi/aha1542.cprintk("aha1542.c: Unsupported BIOS options enabled."
printk317drivers/scsi/aha1542.cprintk("aha1542_command: returning %x (status %d)\n", 
printk325drivers/scsi/aha1542.cprintk("...done %d %d\n",mbo, mbi);
printk331drivers/scsi/aha1542.cprintk("aha1542_intr_handle: Unexpected interrupt\n");
printk356drivers/scsi/aha1542.cif(errstatus) printk("(aha1542 error:%x %x %x) ",errstatus, 
printk364drivers/scsi/aha1542.cDEB(printk("aha1542_intr_handle: sense:"));
printk367drivers/scsi/aha1542.cprintk("%02x ", ccb[mbo].cdb[ccb[mbo].cdblen+i]);
printk368drivers/scsi/aha1542.cprintk("\n");
printk377drivers/scsi/aha1542.cDEB(if (errstatus) printk("aha1542_intr_handle: returning %6x\n", errstatus));
printk411drivers/scsi/aha1542.cprintk("Wrong buffer length supplied for request sense (%d)\n",bufflen);
printk428drivers/scsi/aha1542.cprintk("aha1542_queuecommand: dev %d cmd %02x pos %d len %d ", target, *cmd, i, bufflen);
printk430drivers/scsi/aha1542.cprintk("aha1542_command: dev %d cmd %02x pos %d len %d ", target, *cmd, i, bufflen);
printk432drivers/scsi/aha1542.cprintk("aha1542_queuecommand: dumping scsi cmd:");
printk433drivers/scsi/aha1542.cfor (i = 0; i < (COMMAND_SIZE(*cmd)); i++) printk("%02x ", cmd[i]);
printk434drivers/scsi/aha1542.cprintk("\n");
printk462drivers/scsi/aha1542.cprintk("Sending command (%d %x)...",mbo, done);
printk495drivers/scsi/aha1542.cprintk("Bad segment list supplied to aha1542.c (%d, %d)\n",SCpnt->use_sg,i);
printk497drivers/scsi/aha1542.cprintk("%d: %x %x %d\n",i,(unsigned int) sgpnt[i].address, (unsigned int) sgpnt[i].alt_address,
printk500drivers/scsi/aha1542.cprintk("cptr %x: ",(unsigned int) cptr);
printk502drivers/scsi/aha1542.cfor(i=0;i<18;i++) printk("%02x ", ptr[i]);
printk513drivers/scsi/aha1542.cprintk("cptr %x: ",cptr);
printk515drivers/scsi/aha1542.cfor(i=0;i<18;i++) printk("%02x ", ptr[i]);
printk530drivers/scsi/aha1542.cprintk("aha1542_command: sending.. ");
printk532drivers/scsi/aha1542.cprintk("%02x ", ((unchar *)&ccb[mbo])[i]);
printk537drivers/scsi/aha1542.cDEB(printk("aha1542_queuecommand: now waiting for interrupt "); aha1542_stat());
printk544drivers/scsi/aha1542.cprintk("aha1542_queuecommand: done can't be NULL\n");
printk558drivers/scsi/aha1542.cDEB(printk("aha1542_command: ..calling aha1542_queuecommand\n"));
printk589drivers/scsi/aha1542.cprintk("aha1542_detect: failed setting up mailboxes\n");
printk608drivers/scsi/aha1542.cprintk("aha1542_detect: query board settings\n");
printk622drivers/scsi/aha1542.cprintk("DMA priority 0 not available for Adaptec driver\n");
printk630drivers/scsi/aha1542.cprintk("Unable to determine Adaptec DMA priority.  Disabling board\n");
printk653drivers/scsi/aha1542.cprintk("Unable to determine Adaptec IRQ level.  Disabling board\n");
printk674drivers/scsi/aha1542.cprintk("aha1542_detect: query card type\n");
printk685drivers/scsi/aha1542.cprintk("aha1542.c: Emulation mode not supported for AHA 174N hardware.\n");
printk701drivers/scsi/aha1542.cDEB(printk("aha1542_detect: \n"));
printk726drivers/scsi/aha1542.cprintk("aha1542_detect: setting bus on/off-time failed\n");
printk734drivers/scsi/aha1542.cprintk("Configuring Adaptec at IO:%x, IRQ %d",base_io, irq_level);
printk736drivers/scsi/aha1542.cprintk(", DMA priority %d", dma_chan);
printk737drivers/scsi/aha1542.cprintk("\n");
printk744drivers/scsi/aha1542.cDEB(printk("aha1542_detect: enable interrupt channel %d\n", irq_level));
printk747drivers/scsi/aha1542.cprintk("Unable to allocate IRQ for adaptec controller.\n");
printk753drivers/scsi/aha1542.cprintk("Unable to allocate DMA channel for Adaptec.\n");
printk772drivers/scsi/aha1542.cDEB(printk(" *** READ CAPACITY ***\n"));
printk782drivers/scsi/aha1542.cprintk("aha_detect: LU %d sector_size %d device_size %d\n",
printk787drivers/scsi/aha1542.cDEB(printk(" *** NOW RUNNING MY OWN TEST *** \n"));
printk825drivers/scsi/aha1542.cDEB(printk("aha1542_abort\n"));
printk845drivers/scsi/aha1542.cDEB(printk("aha1542_reset called\n"));
printk80drivers/scsi/aha1740.cprintk("makecode from %x,%x,%x,%x %x,%x,%x,%x",status[0],status[1],status[2],status[3],
printk118drivers/scsi/aha1740.cprintk("aha1740.c: WARNING: AHA1740 queue overflow!\n");
printk153drivers/scsi/aha1740.cprintk("aha1740: Board detected, but EBCNTRL = %x, so disabled it.\n",
printk161drivers/scsi/aha1740.cprintk("aha1740: Board detected, but not in enhanced mode, so disabled it.\n");
printk184drivers/scsi/aha1740.cDEB(printk("aha1740_intr top of loop.\n"));
printk212drivers/scsi/aha1740.cDEB(if (errstatus) printk("aha1740_intr_handle: returning %6x\n", errstatus));
printk220drivers/scsi/aha1740.cprintk("aha1740 hardware failure!\n");
printk223drivers/scsi/aha1740.cprintk("aha1740 asynchronous event: %02x %02x %02x %02x %02x\n",adapstat,
printk253drivers/scsi/aha1740.cprintk("Wrong buffer length supplied for request sense (%d)\n",bufflen);
printk268drivers/scsi/aha1740.cprintk("aha1740_queuecommand: dev %d cmd %02x pos %d len %d ", target, *cmd, i, bufflen);
printk269drivers/scsi/aha1740.cprintk("scsi cmd:");
printk270drivers/scsi/aha1740.cfor (i = 0; i < (COMMAND_SIZE(*cmd)); i++) printk("%02x ", cmd[i]);
printk271drivers/scsi/aha1740.cprintk("\n");
printk296drivers/scsi/aha1740.cprintk("Sending command (%d %x)...",ecbno, done);
printk330drivers/scsi/aha1740.cprintk("cptr %x: ",cptr);
printk332drivers/scsi/aha1740.cfor(i=0;i<24;i++) printk("%02x ", ptr[i]);
printk353drivers/scsi/aha1740.cprintk("aha1740_command: sending.. ");
printk355drivers/scsi/aha1740.cprintk("%02x ", ((unchar *)&ecb[ecbno])[i]);
printk357drivers/scsi/aha1740.cprintk("\n");
printk371drivers/scsi/aha1740.cDEB(printk("aha1740[%d] critical section\n",ecbno));
printk375drivers/scsi/aha1740.cprintk("aha1740[%d]_mbxout wait!\n",ecbno);
printk386drivers/scsi/aha1740.cprintk("aha1740[%d]_attn wait!\n",ecbno);
printk392drivers/scsi/aha1740.cDEB(printk("aha1740[%d] request queued.\n",ecbno));
printk395drivers/scsi/aha1740.cprintk("aha1740_queuecommand: done can't be NULL\n");
printk431drivers/scsi/aha1740.cDEB(printk("aha1740_detect: \n"));
printk455drivers/scsi/aha1740.cprintk("Configuring Adaptec at IO:%x, IRQ %d\n",base,
printk458drivers/scsi/aha1740.cDEB(printk("aha1740_detect: enable interrupt channel %d\n", irq_level));
printk462drivers/scsi/aha1740.cprintk("Unable to allocate IRQ for adaptec controller.\n");
printk479drivers/scsi/aha1740.cDEB(printk("aha1740_abort called\n"));
printk489drivers/scsi/aha1740.cDEB(printk("aha1740_reset called\n"));
printk496drivers/scsi/aha1740.cDEB(printk("aha1740_biosparam\n"));
printk79drivers/scsi/constants.cprintk("%s(0x%02x) ", reserved, opcode); 
printk82drivers/scsi/constants.cprintk("%s(0x%02x) ", unknown, opcode); 
printk85drivers/scsi/constants.cprintk("%s(0x%02x) ", vendor, opcode); 
printk88drivers/scsi/constants.cprintk("%s ",table[opcode & 0x31]);
printk93drivers/scsi/constants.cprintk("0x%02x ", opcode);
printk101drivers/scsi/constants.cprintk("%02x ", command[i]);
printk102drivers/scsi/constants.cprintk("\n");
printk117drivers/scsi/constants.cprintk("%s ",statuses[status]);
printk119drivers/scsi/constants.cprintk("0x%0x ", status); 
printk377drivers/scsi/constants.cprintk("extra data not valid ");
printk379drivers/scsi/constants.cif (sense_buffer[2] & 0x80) printk( "FMK ");
printk380drivers/scsi/constants.cif (sense_buffer[2] & 0x40) printk( "EOM ");
printk381drivers/scsi/constants.cif (sense_buffer[2] & 0x20) printk( "ILI ");
printk394drivers/scsi/constants.cprintk("%s error ", error);
printk397drivers/scsi/constants.cif (sense_buffer[2] & 0x80) printk( "FMK ");
printk398drivers/scsi/constants.cif (sense_buffer[2] & 0x40) printk( "EOM ");
printk399drivers/scsi/constants.cif (sense_buffer[2] & 0x20) printk( "ILI ");
printk400drivers/scsi/constants.cprintk( "%s%x: sense key %s\n", devclass, dev, snstext[sense_buffer[2] & 0x0f]);
printk402drivers/scsi/constants.cprintk("%s%x: sns = %2x %2x\n", devclass, dev, sense_buffer[0], sense_buffer[2]);
printk413drivers/scsi/constants.cprintk("Additional sense indicates %s\n", additional[i].text);
printk419drivers/scsi/constants.cprintk("Additional sense indicates ");
printk420drivers/scsi/constants.cprintk(additional2[i].text, sense_buffer[13]);
printk421drivers/scsi/constants.cprintk("\n");
printk424drivers/scsi/constants.cprintk("ASC=%2x ASCQ=%2x\n", sense_buffer[12], sense_buffer[13]);
printk430drivers/scsi/constants.cprintk("%s%x: old sense key %s\n", devclass, dev, snstext[sense_buffer[0] & 0x0f]);
printk433drivers/scsi/constants.cprintk("%s%x: sns = %2x %2x\n", devclass, dev, sense_buffer[0], sense_buffer[2]);
printk435drivers/scsi/constants.cprintk("Non-extended sense class %d code 0x%0x ", sense_class, code);
printk441drivers/scsi/constants.cprintk("0x%02x ", sense_buffer[i]);
printk478drivers/scsi/constants.cprintk("Extended Message code %s arguments ", 
printk480drivers/scsi/constants.cprintk("%s " extended_msgs[msg[2]]),
printk486drivers/scsi/constants.cprintk("%02x ", msg[i]);
printk490drivers/scsi/constants.cprintk("Identify disconnect %sallowed %s %d ",
printk495drivers/scsi/constants.cprintk("%02x ", msg[0]);
printk502drivers/scsi/constants.cprintk(one_byte_msgs[msg[0]]);
printk504drivers/scsi/constants.cprintk("reserved (%02x) ", msg[0]);
printk506drivers/scsi/constants.cprintk("%02x ", msg[0]);
printk513drivers/scsi/constants.cprintk("%s %02x ", two_byte_msgs[msg[0] - 0x20], 
printk516drivers/scsi/constants.cprintk("reserved two byte (%02x %02x) ", 
printk519drivers/scsi/constants.cprintk("%02x %02x", msg[0], msg[1]);
printk524drivers/scsi/constants.cprintk(reserved);
printk526drivers/scsi/constants.cprintk("%02x ", msg[0]);
printk360drivers/scsi/fdomain.cprintk( "%s", fdomain_16x0_info() );
printk361drivers/scsi/fdomain.cprintk( "Future Domain: BIOS version %d.%d, %s\n",
printk367drivers/scsi/fdomain.cprintk( "Future Domain: BIOS at %x; port base at %x; using IRQ %d\n",
printk370drivers/scsi/fdomain.cprintk( "Future Domain: BIOS at %x; port base at %x; *NO* IRQ\n",
printk397drivers/scsi/fdomain.cprintk( " (%x%x),",
printk425drivers/scsi/fdomain.cprintk( " Options = %x\n", options );
printk467drivers/scsi/fdomain.cprintk( "fdomain_16x0_detect()," );
printk472drivers/scsi/fdomain.cprintk( " %x(%x),", (unsigned)addresses[i], (unsigned)bios_base );
printk486drivers/scsi/fdomain.cprintk( " FAILED: NO BIOS\n" );
printk504drivers/scsi/fdomain.cprintk( " %x,", port_base );
printk525drivers/scsi/fdomain.cif (bios_major != 2) printk( " RAM FAILED, " );
printk548drivers/scsi/fdomain.cprintk( " %x,", port_base );
printk556drivers/scsi/fdomain.cprintk( " FAILED: NO PORT\n" );
printk581drivers/scsi/fdomain.cprintk( "Future Domain: LOOPBACK TEST FAILED, FAILING DETECT!\n" );
printk604drivers/scsi/fdomain.cprintk( "Future Domain: IRQ %d is bad!\n", interrupt_level );
printk605drivers/scsi/fdomain.cprintk( "               This shouldn't happen!\n" );
printk606drivers/scsi/fdomain.cprintk( "               Send mail to faith@cs.unc.edu\n" );
printk608drivers/scsi/fdomain.cprintk( "Future Domain: IRQ %d is already in use!\n",
printk610drivers/scsi/fdomain.cprintk( "               Please use another IRQ!\n" );
printk612drivers/scsi/fdomain.cprintk( "Future Domain: Error getting IRQ %d\n", interrupt_level );
printk613drivers/scsi/fdomain.cprintk( "               This shouldn't happen!\n" );
printk614drivers/scsi/fdomain.cprintk( "               Send mail to faith@cs.unc.edu\n" );
printk618drivers/scsi/fdomain.cprintk( "Future Domain: IRQ %d requested from kernel\n",
printk646drivers/scsi/fdomain.cprintk( "Future Domain detection routine scanning for devices:\n" );
printk657drivers/scsi/fdomain.cprintk( "     SCSI ID %d: ", i );
printk659drivers/scsi/fdomain.cprintk( "%c", buf[j] >= 20 ? buf[j] : ' ' );
printk670drivers/scsi/fdomain.cprintk( "%lu MB (%lu byte blocks)",
printk676drivers/scsi/fdomain.cprintk ("\n" );
printk717drivers/scsi/fdomain.cprintk( "fdomain_arbitrate()\n" );
printk735drivers/scsi/fdomain.cprintk( "Arbitration failed, status = %x\n", status );
printk738drivers/scsi/fdomain.cprintk( "Future Domain: Arbitration failed, status = %x", status );
printk768drivers/scsi/fdomain.cif (!target) printk( "Selection failed\n" );
printk771drivers/scsi/fdomain.cif (!target) printk( "Future Domain: Selection failed" );
printk807drivers/scsi/fdomain.cprintk( "Spurious interrupt, in_command = %d, current_SC = %x\n",
printk816drivers/scsi/fdomain.cprintk( "Interrupt after abort, ignoring\n" );
printk830drivers/scsi/fdomain.cprintk( " AFAIL " );
printk854drivers/scsi/fdomain.cprintk( " SFAIL " );
printk860drivers/scsi/fdomain.cprintk( " AltSel " );
printk887drivers/scsi/fdomain.cprintk( "CMD = %x,",
printk906drivers/scsi/fdomain.cprintk( "Status = %x, ", current_SC->SCp.Status );
printk910drivers/scsi/fdomain.cprintk( "Future Domain: target = %d, command = %x, "
printk923drivers/scsi/fdomain.cprintk( "Message = %x, ", current_SC->SCp.Message );
printk928drivers/scsi/fdomain.cprintk( "Future Domain: Message = %x\n",
printk1103drivers/scsi/fdomain.cprintk( "DC=%d, ", data_count ) ;
printk1109drivers/scsi/fdomain.cprintk( "%d OUT, ", data_count );
printk1136drivers/scsi/fdomain.cprintk( "DC=%d, ", data_count );
printk1142drivers/scsi/fdomain.cprintk( "%d IN, ", data_count );
printk1166drivers/scsi/fdomain.cprintk( " ** IN DONE %d ** ", current_SC->SCp.have_data_in );
printk1190drivers/scsi/fdomain.cprintk( "Future Domain: REQUEST SENSE "
printk1197drivers/scsi/fdomain.cprintk( "BEFORE MY_DONE. . ." );
printk1202drivers/scsi/fdomain.cprintk( "RETURNING.\n" );
printk1225drivers/scsi/fdomain.cprintk( "queue: target = %d cmnd = 0x%02x pieces = %d size = %u\n",
printk1303drivers/scsi/fdomain.ccase in_arbitration: printk( "arbitration " ); break;
printk1304drivers/scsi/fdomain.ccase in_selection:   printk( "selection " );   break;
printk1305drivers/scsi/fdomain.ccase in_other:       printk( "other " );       break;
printk1306drivers/scsi/fdomain.cdefault:             printk( "unknown " );     break;
printk1309drivers/scsi/fdomain.cprintk( "(%d), target = %d cmnd = 0x%02x pieces = %d size = %u\n",
printk1315drivers/scsi/fdomain.cprintk( "sent_command = %d, have_data_in = %d, timeout = %d\n",
printk1320drivers/scsi/fdomain.cprintk( "in_interrupt_flag = %d\n", in_interrupt_flag );
printk1334drivers/scsi/fdomain.cprintk( "IMR = 0x%04x", imr );
printk1336drivers/scsi/fdomain.cprintk( " (masked)" );
printk1337drivers/scsi/fdomain.cprintk( ", IRR = 0x%04x, ISR = 0x%04x\n", irr, isr );
printk1339drivers/scsi/fdomain.cprintk( "SCSI Status      = 0x%02x\n", inb( SCSI_Status_port ) );
printk1340drivers/scsi/fdomain.cprintk( "TMC Status       = 0x%02x", inb( TMC_Status_port ) );
printk1342drivers/scsi/fdomain.cprintk( " (interrupt)" );
printk1343drivers/scsi/fdomain.cprintk( "\n" );
printk1344drivers/scsi/fdomain.cprintk( "Interrupt Status = 0x%02x", inb( Interrupt_Status_port ) );
printk1346drivers/scsi/fdomain.cprintk( " (enabled)" );
printk1347drivers/scsi/fdomain.cprintk( "\n" );
printk1349drivers/scsi/fdomain.cprintk( "FIFO Status      = 0x%02x\n", inb( port_base + FIFO_Status ) );
printk1350drivers/scsi/fdomain.cprintk( "Int. Condition   = 0x%02x\n",
printk1353drivers/scsi/fdomain.cprintk( "Configuration 1  = 0x%02x\n", inb( port_base + Configuration1 ) );
printk1355drivers/scsi/fdomain.cprintk( "Configuration 2  = 0x%02x\n",
printk1363drivers/scsi/fdomain.cprintk( "Future Domain: Abort " );
printk1369drivers/scsi/fdomain.cprintk( " (not in command)\n" );
printk1375drivers/scsi/fdomain.cprintk( " code = %d\n", code );
printk1404drivers/scsi/fdomain.cprintk( "Future Domain: SCSI Bus Reset\n" );
printk100drivers/scsi/g_NCR5380.cprintk("generic_NCR5380_setup : usage ncr5380=port,irq,dma\n");
printk146drivers/scsi/g_NCR5380.cprintk("scsi%d : IRQ%d not free, interrupts disabled\n", 
printk152drivers/scsi/g_NCR5380.cprintk("scsi%d : interrupts not enabled. for better interactive performance,\n", hostno);
printk153drivers/scsi/g_NCR5380.cprintk("scsi%d : please jumper the board for a free IRQ.\n", hostno);
printk156drivers/scsi/g_NCR5380.cprintk("scsi%d : at port %d", instance->host_no, instance->io_port);
printk158drivers/scsi/g_NCR5380.cprintk (" interrupts disabled");
printk160drivers/scsi/g_NCR5380.cprintk (" irq %d", instance->irq);
printk161drivers/scsi/g_NCR5380.cprintk(" options CAN_QUEUE=%d  CMD_PER_LUN=%d release=%d",
printk164drivers/scsi/g_NCR5380.cprintk("\n");
printk187drivers/scsi/hosts.cprintk("Register %x %x: %d %d\n", retval, retval->hostt, i, j);
printk242drivers/scsi/hosts.cprintk ("scsi%d : %s\n",
printk246drivers/scsi/hosts.cprintk ("scsi : %d hosts.\n", count);
printk264drivers/scsi/pas16.cprintk("pas16_setup : usage pas16=io_port,irq\n");
printk312drivers/scsi/pas16.cprintk("scsi%d : probing io_port %04x\n", hostno, (unsigned int) bases[current_base].io_port);
printk319drivers/scsi/pas16.cprintk("scsi%d : detected board.\n", hostno);
printk326drivers/scsi/pas16.cprintk("scsi%d : io_port = %04x\n", hostno, (unsigned int) io_port);
printk344drivers/scsi/pas16.cprintk("scsi%d : IRQ%d not free, interrupts disabled\n", 
printk350drivers/scsi/pas16.cprintk("scsi%d : interrupts not enabled. for better interactive performance,\n", hostno);
printk351drivers/scsi/pas16.cprintk("scsi%d : please jumper the board for a free IRQ.\n", hostno);
printk355drivers/scsi/pas16.cprintk("scsi%d : irq = %d\n", hostno, instance->irq);
printk358drivers/scsi/pas16.cprintk("scsi%d : at 0x%04x", instance->host_no, (int) 
printk361drivers/scsi/pas16.cprintk (" interrupts disabled");
printk363drivers/scsi/pas16.cprintk (" irq %d", instance->irq);
printk364drivers/scsi/pas16.cprintk(" options CAN_QUEUE=%d  CMD_PER_LUN=%d release=%d",
printk367drivers/scsi/pas16.cprintk("\n");
printk431drivers/scsi/pas16.cprintk("scsi%d : watchdog timer fired in NCR5480_pread()\n",
printk463drivers/scsi/pas16.cprintk("scsi%d : watchdog timer fired in NCR5480_pwrite()\n",
printk168drivers/scsi/pas16.h(((unsigned char) printk("scsi%d : read register %d at io_port %04x\n"\
printk172drivers/scsi/pas16.h(printk("scsi%d : write %02x to register %d at io_port %04x\n",   \
printk175drivers/scsi/scsi.cprintk ("scan_scsis_done(%d, %06x)\n", SCpnt->host, SCpnt->result);
printk250drivers/scsi/scsi.cprintk("scsi: scan SCSIS id %d lun %d\n", dev, lun);
printk251drivers/scsi/scsi.cprintk("scsi: return code %08x\n", SCmd.result);
printk269drivers/scsi/scsi.cprintk("scsi: performing INQUIRY\n");
printk296drivers/scsi/scsi.cprintk("scsi: INQUIRY successful\n");
printk298drivers/scsi/scsi.cprintk("scsi: INQUIRY failed with code %08x\n");
printk338drivers/scsi/scsi.cprintk("scsi: unknown type %d\n", type);
printk354drivers/scsi/scsi.cprintk("Detected scsi tape st%d at scsi%d, id %d, lun %d\n", MAX_ST,
printk359drivers/scsi/scsi.cprintk("Detected scsi CD-ROM sr%d at scsi%d, id %d, lun %d\n", MAX_SR,
printk365drivers/scsi/scsi.cprintk("Detected scsi disk sd%d at scsi%d, id %d, lun %d\n", MAX_SD,
printk429drivers/scsi/scsi.cprintk("Unlocked floptical drive.\n");
printk462drivers/scsi/scsi.cprintk("scsi : detected ");
printk464drivers/scsi/scsi.cprintk("%d SCSI disk%s ", MAX_SD, (MAX_SD != 1) ? "s" : "");
printk467drivers/scsi/scsi.cprintk("%d tape%s ", MAX_ST, (MAX_ST != 1) ? "s" : "");
printk470drivers/scsi/scsi.cprintk("%d CD-ROM drive%s ", MAX_SR, (MAX_SR != 1) ? "s" : "");
printk472drivers/scsi/scsi.cprintk("total.\n");
printk496drivers/scsi/scsi.cprintk("SCSI host %d timed out - aborting command\n",
printk502drivers/scsi/scsi.cprintk("SCSI host %d abort() timed out - reseting\n",
printk637drivers/scsi/scsi.cprintk("Attempt to allocate device index %d, target %d, lun %d\n",
printk721drivers/scsi/scsi.cprintk("internal_cmnd (host = %d, target = %d, command = %08x, buffer =  %08x, \n"
printk728drivers/scsi/scsi.cprintk("queuecommand : routine at %08x\n", 
printk737drivers/scsi/scsi.cprintk("command() :  routine at %08x\n", host->hostt->command);
printk744drivers/scsi/scsi.cprintk("done(host = %d, result = %04x) : routine at %08x\n", host->host_no, temp, done);
printk749drivers/scsi/scsi.cprintk("leaving internal_cmnd()\n");
printk794drivers/scsi/scsi.cprintk ("scsi_do_cmd (host = %d, target = %d, buffer =%08x, "
printk798drivers/scsi/scsi.cprintk ("%02x  ", ((unsigned char *) cmnd)[i]); 
printk799drivers/scsi/scsi.cprintk("\n");
printk867drivers/scsi/scsi.cprintk ("Leaving scsi_do_cmd()\n");
printk882drivers/scsi/scsi.cprintk("scsi: reset(%d)\n", SCpnt->host->host_no);
printk889drivers/scsi/scsi.cprintk("performing request sense\n");
printk915drivers/scsi/scsi.cprintk("scsi%d : ", SCpnt->host->host_no);
printk917drivers/scsi/scsi.cprintk("\n");
printk987drivers/scsi/scsi.cprintk("In scsi_done(host = %d, result = %06x)\n", host->host_no, result);
printk1007drivers/scsi/scsi.cprintk("scsi%d : target %d lun %d request sense failed, performing reset.\n", 
printk1027drivers/scsi/scsi.cprintk ("In scsi_done, GOOD status, COMMAND COMPLETE, parsing sense information.\n");
printk1038drivers/scsi/scsi.cprintk("NO SENSE.  status = REDO\n");
printk1047drivers/scsi/scsi.cprintk("SENSE SUGGEST REMAP or SUGGEST RETRY - status = MAYREDO\n");
printk1055drivers/scsi/scsi.cprintk("SENSE SUGGEST ABORT - status = FINISHED");
printk1062drivers/scsi/scsi.cprintk ("Internal error %s %d \n", __FILE__, 
printk1069drivers/scsi/scsi.cprintk("COMMAND COMPLETE message returned, status = FINISHED. \n");
printk1111drivers/scsi/scsi.cprintk("scsi%d : RESERVATION CONFLICT performing reset.\n", 
printk1121drivers/scsi/scsi.cprintk ("Internal error %s %d \n"
printk1133drivers/scsi/scsi.cprintk("Host returned DID_TIME_OUT - ");
printk1139drivers/scsi/scsi.cprintk("Aborting\n");
printk1146drivers/scsi/scsi.cprintk ("Retrying.\n");
printk1158drivers/scsi/scsi.cprintk("Couldn't connect.\n");
printk1209drivers/scsi/scsi.cprintk("In MAYREDO, allowing %d retries, have %d\n",
printk1218drivers/scsi/scsi.cprintk("scsi%d : reseting for second half of retries.\n",
printk1253drivers/scsi/scsi.cprintk("Calling done function - at address %08x\n", SCpnt->done);
printk1326drivers/scsi/scsi.cprintk("Danger Will Robinson! - SCSI bus for host %d is being reset.\n",host->host_no);
printk1504drivers/scsi/scsi.cprintk("SMalloc: %d %x ",len, dma_malloc_buffer + (i << 13) + (j << 9));
printk1519drivers/scsi/scsi.cprintk("Sfree %x %d\n",obj, len);
printk1666drivers/scsi/scsi.cprintk("  Vendor: ");
printk1670drivers/scsi/scsi.cprintk("%c", data[i]);
printk1672drivers/scsi/scsi.cprintk(" ");
printk1675drivers/scsi/scsi.cprintk("  Model: ");
printk1679drivers/scsi/scsi.cprintk("%c", data[i]);
printk1681drivers/scsi/scsi.cprintk(" ");
printk1684drivers/scsi/scsi.cprintk("  Rev: ");
printk1688drivers/scsi/scsi.cprintk("%c", data[i]);
printk1690drivers/scsi/scsi.cprintk(" ");
printk1693drivers/scsi/scsi.cprintk("\n");
printk1697drivers/scsi/scsi.cprintk("  Type:   %s ",
printk1699drivers/scsi/scsi.cprintk("                 ANSI SCSI revision: %02x", data[2] & 0x07);
printk1701drivers/scsi/scsi.cprintk(" CCS\n");
printk1703drivers/scsi/scsi.cprintk("\n");
printk459drivers/scsi/scsi.hprintk(DEVICE_NAME " I/O error: dev %04x, sector %lu\n",
printk476drivers/scsi/scsi.hprintk("end_scsi_request: buffer-list destroyed\n");
printk47drivers/scsi/scsi_debug.cif (bufflen != 1024) {printk("%d", bufflen); panic("(1)Bad bufflen");};      \
printk53drivers/scsi/scsi_debug.c{  printk("Wrong bh block# %d %d ",bh->b_blocknr, block);  \
printk62drivers/scsi/scsi_debug.cprintk("Dev #s %x %x ",SCpnt->request.dev, target);      \
printk68drivers/scsi/scsi_debug.cif (bufflen != 1024 && (!SCpnt->use_sg)) {printk("%x %d\n ",bufflen, SCpnt->use_sg); panic("Bad bufflen");};     \
printk78drivers/scsi/scsi_debug.c{  printk("Wrong bh block# %d %d ",SCpnt->request.bh->b_blocknr, block);  \
printk99drivers/scsi/scsi_debug.cprintk("use_sg: %d",SCpnt->use_sg);
printk104drivers/scsi/scsi_debug.cprintk(":%x %x %d\n",sgpnt[i].alt_address, sgpnt[i].address, sgpnt[i].length);
printk105drivers/scsi/scsi_debug.cif (lpnt) printk(" (Alt %x) ",lpnt[15]);
printk108drivers/scsi/scsi_debug.cprintk("nosg: %x %x %d\n",SCpnt->request.buffer, SCpnt->buffer,
printk111drivers/scsi/scsi_debug.cif (lpnt) printk(" (Alt %x) ",lpnt[15]);
printk115drivers/scsi/scsi_debug.cif ((i & 7) == 0) printk("\n");
printk116drivers/scsi/scsi_debug.cprintk("%x ",*lpnt++);
printk118drivers/scsi/scsi_debug.cprintk("\n");
printk122drivers/scsi/scsi_debug.cif ((i & 7) == 0) printk("\n");
printk123drivers/scsi/scsi_debug.cprintk("%x ",*lpnt++);
printk126drivers/scsi/scsi_debug.cprintk("\n");
printk129drivers/scsi/scsi_debug.cif ((i & 7) == 0) printk("\n");
printk130drivers/scsi/scsi_debug.cprintk("%x ",*lpnt++);
printk132drivers/scsi/scsi_debug.cprintk("\n");
printk134drivers/scsi/scsi_debug.cprintk("DMA free %d sectors.\n", dma_free_sectors);
printk165drivers/scsi/scsi_debug.cprintk("Request sense...\n");
printk168drivers/scsi/scsi_debug.cprintk("scsi_debug: Requesting sense buffer (%x %x %x %d):", SCpnt, buff, done, bufflen);
printk169drivers/scsi/scsi_debug.cfor(i=0;i<12;i++) printk("%d ",sense_buffer[i]);
printk170drivers/scsi/scsi_debug.cprintk("\n");
printk180drivers/scsi/scsi_debug.cif(cmd[4]) printk("Medium removal inhibited...");
printk181drivers/scsi/scsi_debug.celse printk("Medium removal enabled...");
printk185drivers/scsi/scsi_debug.cprintk("Inquiry...(%x %d)\n", buff, bufflen);
printk196drivers/scsi/scsi_debug.cprintk("Test unit ready.\n");
printk202drivers/scsi/scsi_debug.cprintk("Read Capacity\n");
printk215drivers/scsi/scsi_debug.cprintk("Read...");
printk222drivers/scsi/scsi_debug.cprintk("(r%d)",SCpnt->request.nr_sectors);
printk252drivers/scsi/scsi_debug.cif (SCpnt->use_sg) printk("Block %x (%d %d)\n",block, SCpnt->request.nr_sectors,
printk265drivers/scsi/scsi_debug.cprintk("scsi_debug: Filling sense buffer:");
printk266drivers/scsi/scsi_debug.cfor(i=0;i<12;i++) printk("%d ",sense_buffer[i]);
printk267drivers/scsi/scsi_debug.cprintk("\n");
printk297drivers/scsi/scsi_debug.cprintk("Write\n");
printk304drivers/scsi/scsi_debug.cprintk("(w%d)",SCpnt->request.nr_sectors);
printk313drivers/scsi/scsi_debug.cprintk("%x %x :",block,  *((unsigned long *) (buff+60)));
printk321drivers/scsi/scsi_debug.cprintk("Unknown command %d\n",*cmd);
printk338drivers/scsi/scsi_debug.cDEB(printk("scsi_debug_queuecommand: now waiting for interrupt "););
printk340drivers/scsi/scsi_debug.cprintk("scsi_debug_queuecommand: Two concurrent queuecommand?\n");
printk345drivers/scsi/scsi_debug.cprintk("scsi_debug_queuecommand: done cant be NULL\n");
printk359drivers/scsi/scsi_debug.cprintk("Sending command (%d %x %d %d)...", i, done, timeout[i],jiffies);
printk375drivers/scsi/scsi_debug.cDEB(printk("scsi_debug_command: ..calling scsi_debug_queuecommand\n"));
printk435drivers/scsi/scsi_debug.cprintk("scsi_debug_intr_handle: Unexpected interrupt\n"); 
printk440drivers/scsi/scsi_debug.cprintk("In intr_handle...");
printk441drivers/scsi/scsi_debug.cprintk("...done %d %x %d %d\n",i , my_done, to, jiffies);
printk442drivers/scsi/scsi_debug.cprintk("In intr_handle: %d %x %x\n",i, SCtmp, my_done);
printk447drivers/scsi/scsi_debug.cprintk("Called done.\n");
printk466drivers/scsi/scsi_debug.cDEB(printk("scsi_debug_abort\n"));
printk494drivers/scsi/scsi_debug.cDEB(printk("scsi_debug_reset called\n"));
printk109drivers/scsi/scsi_ioctl.celse printk("SCSI device (ioctl) reports ILLEGAL REQUEST.\n");
printk113drivers/scsi/scsi_ioctl.cprintk("Device not ready.  Make sure there is a disc in the drive.\n");
printk120drivers/scsi/scsi_ioctl.cprintk("Disc change detected.\n");
printk124drivers/scsi/scsi_ioctl.cprintk("SCSI CD error: host %d id %d lun %d return code = %x\n",
printk129drivers/scsi/scsi_ioctl.cprintk("\tSense class %x, sense error %x, extended sense %x\n",
printk211drivers/scsi/scsi_ioctl.cprintk("scsi_ioctl : device %d.  command = ", dev->id);
printk213drivers/scsi/scsi_ioctl.cprintk("%02x ", cmd[i]);
printk214drivers/scsi/scsi_ioctl.cprintk("\nbuffer =");
printk216drivers/scsi/scsi_ioctl.cprintk("%02x ", buf[i]);
printk217drivers/scsi/scsi_ioctl.cprintk("\n");
printk218drivers/scsi/scsi_ioctl.cprintk("inlen = %d, outlen = %d, cmdlen = %d\n",
printk220drivers/scsi/scsi_ioctl.cprintk("buffer = %d, cmd_in = %d\n", buffer, cmd_in);
printk144drivers/scsi/sd.cprintk("sd%d : rw_intr(%d, %d)\n", MINOR(SCpnt->request.dev), SCpnt->host->host_no, result);
printk156drivers/scsi/sd.cprintk("sd%d : %d sectors remain.\n", MINOR(SCpnt->request.dev), SCpnt->request.nr_sectors);
printk157drivers/scsi/sd.cprintk("use_sg is %d\n ",SCpnt->use_sg);
printk165drivers/scsi/sd.cprintk(":%x %x %d\n",sgpnt[i].alt_address, sgpnt[i].address, sgpnt[i].length);
printk177drivers/scsi/sd.cprintk("nosg: %x %x %d\n",SCpnt->request.buffer, SCpnt->buffer,
printk198drivers/scsi/sd.cprintk("sd%d : handling page request, no buffer\n",
printk221drivers/scsi/sd.cprintk("err: %x %x %d\n",SCpnt->request.buffer, SCpnt->buffer,
printk231drivers/scsi/sd.cprintk("nosgerr: %x %x %d\n",SCpnt->request.buffer, SCpnt->buffer,
printk292drivers/scsi/sd.cprintk("SCSI disk error : host %d id %d lun %d return code = %x\n",
printk398drivers/scsi/sd.cprintk("Doing sd request, dev = %d, block = %d\n", dev, block);
printk421drivers/scsi/sd.cprintk("sd%d : real dev = /dev/sd%d, block = %d\n", MINOR(SCpnt->request.dev), dev, block);
printk465drivers/scsi/sd.cprintk("Warning: SCSI DMA buffer space running low.  Using non scatter-gather I/O.\n");
printk494drivers/scsi/sd.cprintk("Warning - running *really* short on DMA buffers\n");
printk523drivers/scsi/sd.cprintk("Warning: Running low on SCSI DMA buffers");
printk557drivers/scsi/sd.cprintk("sd%d : %s %d/%d 512 byte blocks.\n", MINOR(SCpnt->request.dev),
printk624drivers/scsi/sd.cprintk("SCSI disk request error: invalid device.\n");
printk707drivers/scsi/sd.cprintk( "sd%d: Spinning up disk...", i );
printk729drivers/scsi/sd.cprintk( "." );
printk734drivers/scsi/sd.cprintk( "not responding...\n" );
printk736drivers/scsi/sd.cprintk( "ready\n" );
printk791drivers/scsi/sd.cprintk ("sd%d : READ CAPACITY failed.\n"
printk800drivers/scsi/sd.cprintk("sd%d : extended sense code = %1x \n", i, SCpnt->sense_buffer[2] & 0xf);
printk802drivers/scsi/sd.cprintk("sd%d : sense not available. \n", i);
printk804drivers/scsi/sd.cprintk("sd%d : block size assumed to be 512 bytes, disk size 1GB.  \n", i);
printk829drivers/scsi/sd.cprintk ("sd%d : unsupported sector size %d.\n",
printk834drivers/scsi/sd.cprintk ("scsi : deleting disk entry.\n");
printk865drivers/scsi/sd.cprintk("Unable to get major %d for SCSI disk\n",MAJOR_NR);
printk943drivers/scsi/sd.cprintk("Device busy for revalidation (usage=%d)\n", USAGE);
printk256drivers/scsi/seagate.cprintk("scsi%d : borken calibrated to %dK/sec, %d cycles per transfer\n", 
printk267drivers/scsi/seagate.cprintk("scsi%d : borken timeout\n", hostno);
printk291drivers/scsi/seagate.cprintk("Autodetecting seagate ST0x\n");
printk296drivers/scsi/seagate.cprintk ("ERROR : seagate_st0x_detect() called twice.\n");
printk314drivers/scsi/seagate.cprintk("Base address overridden to %x, controller type is %s\n",
printk346drivers/scsi/seagate.cprintk("ST0x detected. Base address = %x, cr = %x, dr = %x\n", base_address, st0x_cr_sr, st0x_dr);
printk354drivers/scsi/seagate.cprintk("scsi%d : unable to allocate IRQ%d\n",
printk367drivers/scsi/seagate.cprintk("ST0x not detected.\n");
printk466drivers/scsi/seagate.cprintk("scsi%d : seagate_reconnect_intr() called\n", hostno);
printk470drivers/scsi/seagate.cprintk("scsi%d: unexpected interrupt.\n", hostno);
printk475drivers/scsi/seagate.cprintk("scsi%d : internal_command("
printk487drivers/scsi/seagate.cprintk("scsi%d : done_fn(%d,%08x)", hostno, 
printk496drivers/scsi/seagate.cprintk("done_fn() not defined.\n");
printk539drivers/scsi/seagate.cprintk("scsi%d : using linked commands, current I_T_L nexus is ",
printk545drivers/scsi/seagate.cprintk("correct\n");
printk550drivers/scsi/seagate.cprintk("incorrect\n");
printk622drivers/scsi/seagate.cprintk ("scsi%d : target = %d, command = ", hostno, target);
printk624drivers/scsi/seagate.cprintk("\n");
printk630drivers/scsi/seagate.cprintk("scsi%d : reconnecting\n", hostno);
printk634drivers/scsi/seagate.cprintk("scsi%d : connected, can reconnect\n", hostno);
printk637drivers/scsi/seagate.cprintk("scsi%d : connected to wrong target, can reconnect\n",
printk642drivers/scsi/seagate.cprintk("scsi%d : allowed to reconnect\n", hostno);
printk645drivers/scsi/seagate.cprintk("scsi%d : not allowed to reconnect\n", hostno);
printk662drivers/scsi/seagate.cprintk("scsi%d : phase RESELECT \n", hostno);
printk680drivers/scsi/seagate.cprintk("scsi%d : RESELECT timed out while waiting for IO .\n",
printk694drivers/scsi/seagate.cprintk("scsi%d : detected reconnect request to different target.\n" 
printk702drivers/scsi/seagate.cprintk("scsi%d : Unexpected reselect interrupt.  Data bus = %d\n",
printk735drivers/scsi/seagate.cprintk("scsi%d : RESELECT timed out while waiting for SEL.\n",
printk763drivers/scsi/seagate.cprintk ("scsi%d : phase = BUS FREE \n", hostno);
printk789drivers/scsi/seagate.cprintk("scsi%d : phase = SELECTION\n", hostno);
printk817drivers/scsi/seagate.cprintk("scsi%d : arbitration lost\n", hostno);
printk819drivers/scsi/seagate.cprintk("scsi%d : arbitration timeout.\n", hostno);
printk826drivers/scsi/seagate.cprintk("scsi%d : arbitration complete\n", hostno);
printk856drivers/scsi/seagate.cprintk("seagate_st0x_timeout : %d            \r",temp);
printk859drivers/scsi/seagate.cprintk("Done.                                             \n");
printk860drivers/scsi/seagate.cprintk("scsi%d : status = %02x, seagate_st0x_timeout = %d, aborted = %02x \n", 
printk870drivers/scsi/seagate.cprintk ("scsi%d : NO CONNECT with target %d, status = %x \n", 
printk885drivers/scsi/seagate.cprintk("scsi%d : BST asserted after we've been aborted.\n",
printk899drivers/scsi/seagate.cprintk("scsi%d : scatter gather requested, using %d buffers.\n",
printk902drivers/scsi/seagate.cprintk("scsi%d : buffer %d address = %08x length = %d\n",
printk912drivers/scsi/seagate.cprintk("scsi%d : scatter gather not requested.\n", hostno);
printk920drivers/scsi/seagate.cprintk("scsi%d : len = %d\n", hostno, len);
printk959drivers/scsi/seagate.cprintk("scsi%d : phase = INFORMATION TRANSFER\n", hostno);
printk980drivers/scsi/seagate.cprintk("scsi%d : got parity error\n", hostno);
printk994drivers/scsi/seagate.cprintk("scsi%d : phase = DATA OUT\n",
printk998drivers/scsi/seagate.cprintk("scsi%d : phase = DATA IN\n",
printk1002drivers/scsi/seagate.cprintk("scsi%d : phase = COMMAND OUT\n",
printk1006drivers/scsi/seagate.cprintk("scsi%d : phase = STATUS IN\n",
printk1010drivers/scsi/seagate.cprintk("scsi%d : phase = MESSAGE OUT\n",
printk1014drivers/scsi/seagate.cprintk("scsi%d : phase = MESSAGE IN\n",
printk1018drivers/scsi/seagate.cprintk("scsi%d : phase = UNKNOWN\n",
printk1035drivers/scsi/seagate.cprintk("scsi%d: underflow to target %d lun %d \n", 
printk1049drivers/scsi/seagate.cprintk("scsi%d : FAST transfer, underflow = %d, transfersize = %d\n"
printk1077drivers/scsi/seagate.cprintk("scsi%d : FAST transfer complete len = %d data = %08x\n", 
printk1147drivers/scsi/seagate.cprintk("scsi%d : next scatter-gather buffer len = %d address = %08x\n",
printk1176drivers/scsi/seagate.cprintk("scsi%d : FAST transfer, underflow = %d, transfersize = %d\n"
printk1204drivers/scsi/seagate.cprintk("scsi%d: transfered += %d\n", hostno, transfersize);
printk1209drivers/scsi/seagate.cprintk("scsi%d : FAST transfer complete len = %d data = %08x\n", 
printk1218drivers/scsi/seagate.cprintk("scsi%d: transfered += %d\n", hostno, len);
printk1281drivers/scsi/seagate.cprintk("scsi%d: transfered -= %d\n", hostno, len);
printk1293drivers/scsi/seagate.cprintk("scsi%d : next scatter-gather buffer len = %d address = %08x\n",
printk1333drivers/scsi/seagate.cprintk("scsi%d : sent IDENTIFY message.\n", hostno);
printk1343drivers/scsi/seagate.cprintk("scsi%d : sent ABORT message to cancle incorrect I_T_L nexus.\n", hostno);
printk1347drivers/scsi/seagate.cprintk("correct\n");
printk1351drivers/scsi/seagate.cprintk("scsi%d : target %d requested MSGOUT, sent NOP message.\n", hostno, target);
printk1368drivers/scsi/seagate.cprintk("scsi%d : disconnected.\n", hostno);
printk1381drivers/scsi/seagate.cprintk("scsi%d : command complete.\n", hostno);
printk1387drivers/scsi/seagate.cprintk("scsi%d : abort message.\n", hostno);
printk1397drivers/scsi/seagate.cprintk("scsi%d : pointers saved.\n", hostno);
printk1407drivers/scsi/seagate.cprintk("scsi%d : pointers restored.\n", hostno);
printk1423drivers/scsi/seagate.cprintk("scsi%d : IDENTIFY message received from id %d, lun %d.\n",
printk1435drivers/scsi/seagate.cprintk("scsi%d : unknown message %d from target %d.\n",
printk1443drivers/scsi/seagate.cprintk("scsi%d : unknown phase.\n", hostno); 
printk1461drivers/scsi/seagate.cprintk("scsi%d : Transfered %d bytes\n", hostno, transfered);
printk1466drivers/scsi/seagate.cprintk("Buffer : \n");
printk1468drivers/scsi/seagate.cprintk ("%02x  ", ((unsigned char *) data)[i]);  /* WDE mod */
printk1469drivers/scsi/seagate.cprintk("\n");
printk1471drivers/scsi/seagate.cprintk("scsi%d : status = ", hostno);
printk1473drivers/scsi/seagate.cprintk("message = %02x\n", message);
printk1508drivers/scsi/seagate.cprintk("scsi%d : keeping I_T_L nexus established for linked command.\n", 
printk1527drivers/scsi/seagate.cprintk("scsi%d : closing I_T_L nexus.\n", hostno);
printk1539drivers/scsi/seagate.cprintk("scsi%d : exiting seagate_st0x_queue_command() with reconnect enabled.\n",
printk1572drivers/scsi/seagate.cprintk("In seagate_st0x_reset()\n");
printk1591drivers/scsi/seagate.cprintk("SCSI bus reset.\n");
printk1676drivers/scsi/seagate.cprintk("scsi%d : heads = %d cylinders = %d sectors = %d total = %d formatted = %d\n",
printk192drivers/scsi/sg.cprintk("unexpected done for sg %d\n",dev);
printk224drivers/scsi/sg.cprintk("sg_write: sleeping on pending request\n");
printk249drivers/scsi/sg.cprintk("allocating device\n");
printk259drivers/scsi/sg.cprintk("device allocated\n");
printk270drivers/scsi/sg.cprintk("do cmd\n");
printk275drivers/scsi/sg.cprintk("done cmd\n");
printk299drivers/scsi/sg.cprintk("Unable to get major %d for generic SCSI device\n",
printk306drivers/scsi/sg.cprintk("sg: Init generic device.\n");
printk86drivers/scsi/sr.cprintk("CD-ROM request error: invalid device.\n");
printk119drivers/scsi/sr.cprintk("sr.c done: %x %x\n",result, SCpnt->request.bh->b_data);
printk168drivers/scsi/sr.cprintk("(%x %x %x) ",SCpnt->request.bh, SCpnt->request.nr_sectors, 
printk216drivers/scsi/sr.cprintk("CD-ROM error: Drive reports ILLEGAL REQUEST.\n");
printk223drivers/scsi/sr.cprintk("CD-ROM error: Drive reports %d.\n", SCpnt->sense_buffer[2]);        
printk232drivers/scsi/sr.cprintk("CDROM not ready.  Make sure you have a disc in the drive.\n");
printk241drivers/scsi/sr.cprintk("SCSI CD error : host %d id %d lun %d return code = %03x\n", 
printk459drivers/scsi/sr.cprintk("Warning - running *really* short on DMA buffers\n");
printk503drivers/scsi/sr.cprintk("Warning: Running low on SCSI DMA buffers");
printk516drivers/scsi/sr.cprintk("SG: %d %d %d %d %d *** ",SCpnt->use_sg, SCpnt->request.sector,
printk521drivers/scsi/sr.cprintk("SGlist: %d %x %x %x\n", count,
printk601drivers/scsi/sr.cprintk("ReadCD: %d %d %d %d\n",block, realcount, buffer, this_count);
printk602drivers/scsi/sr.cprintk("Use sg: %d\n", SCpnt->use_sg);
printk603drivers/scsi/sr.cprintk("Dumping command: ");
printk604drivers/scsi/sr.cfor(i=0; i<12; i++) printk("%2.2x ", cmd[i]);
printk605drivers/scsi/sr.cprintk("\n");
printk692drivers/scsi/sr.cprintk ("scd%d : unsupported sector size %d.\n",
printk707drivers/scsi/sr.cprintk("Unable to get major %d for SCSI-CD\n",MAJOR_NR);
printk724drivers/scsi/sr.cprintk("Scd sectorsize = %d bytes\n", scsi_CDs[i].sector_size);
printk65drivers/scsi/sr_ioctl.cprintk("Disc change detected.\n");
printk68drivers/scsi/sr_ioctl.cprintk("CDROM not ready.  Make sure there is a disc in the drive.\n");
printk71drivers/scsi/sr_ioctl.cprintk("CDROM (ioctl) reports ILLEGAL REQUEST.\n");
printk74drivers/scsi/sr_ioctl.cprintk("SCSI CD error: host %d id %d lun %d return code = %03x\n", 
printk79drivers/scsi/sr_ioctl.cprintk("\tSense class %x, sense error %x, extended sense %x\n",
printk292drivers/scsi/sr_ioctl.cprintk ("Hosed while obtaining audio mode page\n");
printk311drivers/scsi/sr_ioctl.cprintk ("Hosed while obtaining mask for audio mode page\n");
printk123drivers/scsi/st.cprintk("st?: Illegal interrupt device %x\n", st_nbr);
printk139drivers/scsi/st.cprintk("st%d: Error: %x\n", dev, result);
printk187drivers/scsi/st.cprintk("st%d: Async write error %x.\n", dev,
printk203drivers/scsi/st.cprintk("st%d: Flushing %d bytes.\n", dev, transfer);
printk223drivers/scsi/st.cprintk("st%d: Error on flush:\n", dev);
printk287drivers/scsi/st.cprintk("st%d: Device already in use.\n", dev);
printk296drivers/scsi/st.cprintk("st%d: No free buffers.\n", dev);
printk314drivers/scsi/st.cprintk("st%d: Tape request not allocated", dev);
printk352drivers/scsi/st.cprintk("st%d: No tape.\n", dev);
printk354drivers/scsi/st.cprintk("st%d: Error %x.\n", dev, SCpnt->result);
printk377drivers/scsi/st.cprintk("st%d: Block limits %d - %d bytes.\n", dev, scsi_tapes[dev].min_block,
printk384drivers/scsi/st.cprintk("st%d: Can't read block limits.\n", dev);
printk402drivers/scsi/st.cprintk("st%d: No Mode Sense.\n", dev);
printk410drivers/scsi/st.cprintk("st%d: Mode sense. Length %d, medium %x, WBS %x, BLL %d\n", dev,
printk421drivers/scsi/st.cprintk("st%d: Density %x, tape length: %x, blocksize: %d, drv buffer: %d\n", dev,
printk430drivers/scsi/st.cprintk("st%d: Blocksize %d too large for buffer.\n", dev,
printk454drivers/scsi/st.cprintk("st%d: Block size: %d, buffer size: %d (%d blocks).\n", dev,
printk462drivers/scsi/st.cprintk( "st%d: Write protected\n", dev);
printk488drivers/scsi/st.cprintk("st%d: File length %d bytes.\n", dev, filp->f_pos);
printk506drivers/scsi/st.cprintk("st%d: Error on write filemark.\n", dev);
printk515drivers/scsi/st.cprintk("st%d: Buffer flushed, EOF written\n", dev);
printk548drivers/scsi/st.cprintk("st%d: Incorrect device.\n", dev);
printk571drivers/scsi/st.cprintk("st%d: Async write error %x.\n", dev,
printk631drivers/scsi/st.cprintk("st%d: Error on write:\n", dev);
printk712drivers/scsi/st.cprintk("st%d: Incorrect device.\n", dev);
printk729drivers/scsi/st.cprintk("st%d: EOF flag up. Bytes %d\n", dev,
printk772drivers/scsi/st.cprintk("st%d: Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n", dev,
printk792drivers/scsi/st.cprintk("st%d: Incorrect block size.\n", dev);
printk803drivers/scsi/st.cprintk("st%d: EOM detected (%d blocks read).\n", dev,
printk817drivers/scsi/st.cprintk("st%d: EOF detected (%d blocks read, transferred %d bytes).\n",
printk824drivers/scsi/st.cprintk("st%d: Tape error. Sense key %x\n", dev,
printk850drivers/scsi/st.cprintk("st%d: EOF up. Left %d, needed %d.\n", dev,
printk907drivers/scsi/st.cprintk("st%d: Spacing tape forward %d files.\n", dev,
printk923drivers/scsi/st.cprintk("st%d: Spacing tape backward %d files.\n", dev, (-ltmp));
printk933drivers/scsi/st.cprintk("st%d: Spacing tape forward %d blocks.\n", dev,
printk948drivers/scsi/st.cprintk("st%d: Spacing tape backward %d blocks.\n", dev, (-ltmp));
printk960drivers/scsi/st.cprintk("st%d: Writing %d filemarks.\n", dev,
printk971drivers/scsi/st.cprintk("st%d: Rewinding tape.\n", dev);
printk981drivers/scsi/st.cprintk("st%d: Unloading tape.\n", dev);
printk986drivers/scsi/st.cprintk("st%d: No op on tape.\n", dev);
printk998drivers/scsi/st.cprintk("st%d: Retensioning tape.\n", dev);
printk1005drivers/scsi/st.cprintk("st%d: Spacing to end of recorded medium.\n", dev);
printk1014drivers/scsi/st.cprintk("st%d: Erasing tape.\n", dev);
printk1038drivers/scsi/st.cprintk("st%d: Seeking tape to block %d.\n", dev, arg);
printk1050drivers/scsi/st.cprintk("st%d: Illegal block size.\n", dev);
printk1077drivers/scsi/st.cprintk("st%d: Setting block size to %d bytes.\n", dev,
printk1082drivers/scsi/st.cprintk("st%d: Setting density code to %x.\n", dev,
printk1085drivers/scsi/st.cprintk("st%d: Setting drive buffer code to %d.\n",
printk1090drivers/scsi/st.cprintk("st%d: Unknown st_ioctl command %x.\n", dev, cmd_in);
printk1160drivers/scsi/st.cprintk("st%d: Incorrect device.\n", dev);
printk1199drivers/scsi/st.cprintk("st%d: get tape position.\n", dev);
printk1235drivers/scsi/st.cprintk("st%d: Can't read tape position.\n", dev);
printk1294drivers/scsi/st.cprintk("Unable to get major %d for SCSI tapes\n",MAJOR_NR);
printk1300drivers/scsi/st.cprintk("st: Init tape.\n");
printk1323drivers/scsi/st.cprintk("st: Buffer address: %x\n", st_buffers[i]);
printk167drivers/scsi/t128.cprintk("t128_setup : usage t128=address,irq\n");
printk210drivers/scsi/t128.cprintk("scsi%d : probing address %08x\n", hostno, (unsigned int) bases[current_base].address);
printk218drivers/scsi/t128.cprintk("scsi%d : detected board.\n", hostno);
printk225drivers/scsi/t128.cprintk("scsi%d : base = %08x\n", hostno, (unsigned int) base);
printk243drivers/scsi/t128.cprintk("scsi%d : IRQ%d not free, interrupts disabled\n", 
printk249drivers/scsi/t128.cprintk("scsi%d : interrupts not enabled. for better interactive performance,\n", hostno);
printk250drivers/scsi/t128.cprintk("scsi%d : please jumper the board for a free IRQ.\n", hostno);
printk254drivers/scsi/t128.cprintk("scsi%d : irq = %d\n", hostno, instance->irq);
printk257drivers/scsi/t128.cprintk("scsi%d : at 0x%08x", instance->host_no, (int) 
printk260drivers/scsi/t128.cprintk (" interrupts disabled");
printk262drivers/scsi/t128.cprintk (" irq %d", instance->irq);
printk263drivers/scsi/t128.cprintk(" options CAN_QUEUE=%d  CMD_PER_LUN=%d release=%d",
printk266drivers/scsi/t128.cprintk("\n");
printk334drivers/scsi/t128.cprintk("scsi%d : watchdog timer fired in NCR5480_pread()\n",
printk371drivers/scsi/t128.cprintk("scsi%d : watchdog timer fired in NCR5480_pwrite()\n",
printk145drivers/scsi/t128.h(((unsigned char) printk("scsi%d : read register %d at address %08x\n"\
printk149drivers/scsi/t128.hprintk("scsi%d : write %02x to register %d at address %08x\n",   \
printk340drivers/scsi/ultrastor.cprintk(fmt, command, &config->mscp[command], config->mscp_free);
printk363drivers/scsi/ultrastor.cprintk("US14F: detect: called\n");
printk372drivers/scsi/ultrastor.cprintk("Ultrastor I/O space already in use\n");
printk383drivers/scsi/ultrastor.cprintk("US14F: detect: testing port address %03X\n", config.port_address);
printk390drivers/scsi/ultrastor.cprintk("US14F: detect: wrong product ID 0 - %02X\n", in_byte);
printk392drivers/scsi/ultrastor.cprintk("US14F: detect: no adapter at port %03X\n", config.port_address);
printk406drivers/scsi/ultrastor.cprintk("US14F: detect: wrong product ID 1 - %02X\n", in_byte);
printk408drivers/scsi/ultrastor.cprintk("US14F: detect: no adapter at port %03X\n", config.port_address);
printk423drivers/scsi/ultrastor.cprintk("US14F: detect: no port address found!\n");
printk430drivers/scsi/ultrastor.cprintk("US14F: detect: adapter found at port address %03X\n",
printk462drivers/scsi/ultrastor.cprintk("US14F: detect: not detected.\n");
printk471drivers/scsi/ultrastor.cprintk("US14F: detect: consistancy check failed\n");
printk482drivers/scsi/ultrastor.cprintk("US14F: detect: detect succeeded\n"
printk501drivers/scsi/ultrastor.cprintk("Unable to allocate IRQ%u for UltraStor controller.\n",
printk506drivers/scsi/ultrastor.cprintk("Unable to allocate DMA channel %u for UltraStor controller.\n",
printk512drivers/scsi/ultrastor.cprintk("UltraStor driver version" VERSION ".  Using %d SG lists.\n",
printk523drivers/scsi/ultrastor.cprintk("US24F: detect");
printk542drivers/scsi/ultrastor.cprintk("U24F: found disabled card in slot %u\n", i);
printk547drivers/scsi/ultrastor.cprintk("U24F: found card in slot %u\n", i);
printk566drivers/scsi/ultrastor.cprintk("U24F: invalid IRQ\n");
printk571drivers/scsi/ultrastor.cprintk("Unable to allocate IRQ%u for UltraStor controller.\n",
printk586drivers/scsi/ultrastor.cprintk("US24F: detect: detect succeeded\n"
printk610drivers/scsi/ultrastor.cprintk("UltraStor driver version " VERSION ".  Using %d SG lists.\n",
printk757drivers/scsi/ultrastor.cprintk("USx4F: queuecommand: aborted\n");
printk792drivers/scsi/ultrastor.cprintk("USx4F: queuecommand: returning\n");
printk863drivers/scsi/ultrastor.cprintk("Ux4F: abort while completed command pending\n");
printk893drivers/scsi/ultrastor.cprintk(out, ogm_status, ogm_addr, icm_status, icm_addr);
printk910drivers/scsi/ultrastor.cprintk("abort: command mismatch, %x != %x\n",
printk934drivers/scsi/ultrastor.cprintk("US14F: reset: called\n");
printk1015drivers/scsi/ultrastor.cprintk("Ux4F interrupt: bad MSCP address %x\n", (unsigned int) mscp);
printk1028drivers/scsi/ultrastor.cprintk("US24F: ICM status %x for MSCP %d (%x)\n", icm_status,
printk1036drivers/scsi/ultrastor.cprintk("UltraStor abort command failed\n");
printk1058drivers/scsi/ultrastor.cprintk("MSCP %d (%x): no command\n", mscp_index, (unsigned int) mscp);
printk1108drivers/scsi/ultrastor.cprintk("Ux4 interrupt: MSCP %d (%x) aborted = %d\n",
printk1116drivers/scsi/ultrastor.cprintk("US14F: interrupt: unexpected interrupt\n");
printk1119drivers/scsi/ultrastor.cprintk("Ux4F: multiple commands completed\n");
printk1122drivers/scsi/ultrastor.cprintk("USx4F: interrupt: returning\n");
printk130drivers/scsi/wd7000.cprintk("wd7000_out WAIT failed(%d): ", len+1);
printk194drivers/scsi/wd7000.cDEB(printk("wd7000_scb_out: %06x");)
printk202drivers/scsi/wd7000.cDEB(printk(" using OGMB %x",ogmb));
printk212drivers/scsi/wd7000.cDEB(printk(", scb is %x",scbptr);)
printk215drivers/scsi/wd7000.cDEB(printk(", no free OGMBs.\n");)
printk227drivers/scsi/wd7000.cDEB(printk(", awaiting interrupt.\n");)
printk231drivers/scsi/wd7000.cDEB(printk(", WAIT timed out.\n");)
printk278drivers/scsi/wd7000.cprintk("\nSCSI command error: SCSI %02x host %04x return %d",
printk287drivers/scsi/wd7000.cDEB(printk("wd7000_scsi_done: %06x\n",SCpnt);)
printk301drivers/scsi/wd7000.cDEB(printk("wd7000_intr_handle: intr stat = %02x",flag);)
printk304drivers/scsi/wd7000.cDEB(printk("\nwd7000_intr_handle: phantom interrupt...\n");)
printk312drivers/scsi/wd7000.cDEB(printk("wd7000_intr_handle: free outgoing mailbox\n");)
printk323drivers/scsi/wd7000.cprintk(" ICMB %d posted for SCB/ICB %06x, status %02x, vue %02x",
printk348drivers/scsi/wd7000.cDEB(printk(".\n");)
printk372drivers/scsi/wd7000.cDEB(printk("request_bufflen is %x, bufflen is %x\n",\
printk383drivers/scsi/wd7000.cprintk("Using scatter/gather with %d elements.\n",SCpnt->use_sg);
printk407drivers/scsi/wd7000.cDEB(printk("Using %d bytes for %d scatter/gather blocks\n",\
printk450drivers/scsi/wd7000.cDEB(printk("wd7000_init: Power-on Diagnostics finished\n");)
printk487drivers/scsi/wd7000.cprintk("WD-7000 initialized.\n");
printk537drivers/scsi/wd7000.cprintk("WD-7000 detected.\n");
printk584drivers/scsi/wd7000.cprintk("wd7000_abort: Scsi_Cmnd = 0x%08x, code = %d ", SCpnt, i);
printk585drivers/scsi/wd7000.cprintk("id %d lun %d cdb", SCpnt->target, SCpnt->lun);
printk587drivers/scsi/wd7000.cfor (j=0; j < COMMAND_SIZE(*cdbj);  j++)  printk(" %02x", *(cdbj++));
printk588drivers/scsi/wd7000.cprintk(" result %08x\n", SCpnt->result);
printk602drivers/scsi/wd7000.cprintk("wd7000_reset\n");
printk45drivers/sound/dev_table.cprintk ("snd%d",
printk51drivers/sound/dev_table.cprintk (" at 0x%3x irq %d drq %d\n",
printk108drivers/sound/dev_table.cprintk("sound_setup(%d) called\n", ints[0]);
printk147drivers/sound/dev_table.cprintk("Sound: Invalid setup parameter 0x%08x\n", val);
printk13drivers/sound/dma.h#define deb_outb(x,y) {printk("out %02x, %02x\n", x, y);outb(x,y);}
printk115drivers/sound/dmabuf.cprintk ("SOUND: Invalid PCM parameters[%d] sr=%lu, nc=%lu, sz=%lu\n",
printk200drivers/sound/dmabuf.cprintk ("PCM device %d not installed.\n", dev);
printk209drivers/sound/dmabuf.cprintk ("DSP device %d not initialized\n", dev);
printk241drivers/sound/dmabuf.cprintk("Sound: Reset failed - Can't reopen device\n");
printk361drivers/sound/dmabuf.cprintk ("Sound: DMA timed out\n");
printk517drivers/sound/dmabuf.cprintk ("Soundcard warning: DMA not activated %d/%d\n",
printk526drivers/sound/dmabuf.cprintk ("Sound: DMA timed out\n");
printk549drivers/sound/dmabuf.cprintk ("Soundcard warning: DMA buffers out of sync %d != %d\n", buff_no, dev_qtail[dev]);
printk601drivers/sound/dmabuf.cprintk ("sound: Invalid DMA mode for device %d\n", dev);
printk609drivers/sound/dmabuf.cprintk ("sound: Invalid DMA mode for device %d\n", dev);
printk756drivers/sound/dmabuf.cprintk ("Unable to grab DMA%d for the audio driver\n", chan);
printk66drivers/sound/gus_card.cprintk (" WARNING! GUS found at %03x, config was %03x ", io_addr, hw_config->io_base);
printk127drivers/sound/gus_card.cprintk ("T");
printk61drivers/sound/gus_midi.cprintk ("GUS: Midi busy\n");
printk274drivers/sound/gus_midi.cprintk ("Midi framing error\n");
printk276drivers/sound/gus_midi.cprintk ("GUS: Midi input overrun\n");
printk679drivers/sound/gus_wave.cprintk ("Warning! GUS IRQ not selected\n");
printk686drivers/sound/gus_wave.cprintk ("Warning! GUS DMA not selected\n");
printk808drivers/sound/gus_wave.cprintk ("GUS: Undefined patch %d for voice %d\n", instr_no, voice);
printk814drivers/sound/gus_wave.cprintk ("GUS: Sample #%d not loaded for patch %d (voice %d)\n", sample_no, instr_no, voice);
printk1060drivers/sound/gus_wave.cprintk ("GUS: Invalid voice\n");
printk1117drivers/sound/gus_wave.cprintk ("GUS: Patch %d not defined for note %d\n", patch, note_num);
printk1165drivers/sound/gus_wave.cprintk ("GUS: Sample address error\n");
printk1277drivers/sound/gus_wave.cprintk ("GUS Error: Invalid patch format (key) 0x%04x\n", format);
printk1283drivers/sound/gus_wave.cprintk ("GUS Error: Patch header too short\n");
printk1291drivers/sound/gus_wave.cprintk ("GUS: Sample table full\n");
printk1306drivers/sound/gus_wave.cprintk ("GUS: Invalid patch number %d\n", instr);
printk1312drivers/sound/gus_wave.cprintk ("GUS Warning: Patch record too short (%d<%lu)\n",
printk1319drivers/sound/gus_wave.cprintk ("GUS: Invalid sample length %lu\n", patch.len);
printk1327drivers/sound/gus_wave.cprintk ("GUS: Invalid loop start\n");
printk1333drivers/sound/gus_wave.cprintk ("GUS: Invalid loop end\n");
printk1349drivers/sound/gus_wave.cprintk ("GUS: Sample (16 bit) too long %lu\n", patch.len);
printk1483drivers/sound/gus_wave.cprintk ("GUS: DMA Transfer timed out\n");
printk1752drivers/sound/gus_wave.cprintk ("GUS: DMA mode not enabled. Device not supported\n");
printk1921drivers/sound/gus_wave.cprintk ("GUS Warning: PCM buffers out of sync\n");
printk2021drivers/sound/gus_wave.cprintk ("GUS Error: 16 bit recording not supported\n");
printk2320drivers/sound/gus_wave.cprintk (" <Gravis UltraSound %luk>", gus_mem_size / 1024);
printk2324drivers/sound/gus_wave.cprintk ("ERROR! Invalid IRQ#%d. GUS Disabled", irq);
printk2330drivers/sound/gus_wave.cprintk ("ERROR! Invalid DMA#%d. GUS Disabled", dma);
printk2338drivers/sound/gus_wave.cprintk ("GUS Error: Too many synthesizers\n");
printk2355drivers/sound/gus_wave.cprintk ("GUS: Too many PCM devices available\n");
printk56drivers/sound/midibuf.cprintk ("Midi: MPU-401 compatible Midi interface not present\n");
printk126drivers/sound/mpu401.cprintk ("MPU-401: Midi busy\n");
printk171drivers/sound/mpu401.cprintk ("MPU-401: Timeout\n");
printk253drivers/sound/mpu401.cprintk (" <Roland MPU-401>");
printk133drivers/sound/opl3.cprintk ("FM Error: Invalid instrument number %d\n", ins.channel);
printk246drivers/sound/opl3.cDEB (printk ("Kill note %d\n", voice));
printk276drivers/sound/opl3.cprintk ("FM warning: Invalid patch format field (key) 0x%04x\n", instr->key);
printk469drivers/sound/opl3.cprintk (
printk730drivers/sound/opl3.cprintk ("FM Error: Patch record too short\n");
printk738drivers/sound/opl3.cprintk ("FM Error: Invalid instrument number %d\n", ins.channel);
printk769drivers/sound/opl3.cDEB (printk ("Aftertouch %d\n", voice));
printk903drivers/sound/opl3.cprintk (" <Yamaha OPL-3 FM>");
printk925drivers/sound/opl3.cprintk (" <Yamaha 2-OP FM>");
printk71drivers/sound/pas2_card.cprintk ("    PAS2: %s.\n", foo);
printk172drivers/sound/pas2_card.cprintk ("PAS2: Invalid IRQ %d", pas_irq);
printk180drivers/sound/pas2_card.cprintk ("PAS2: Invalid IRQ %d", pas_irq);
printk187drivers/sound/pas2_card.cprintk ("PAS2: Invalid DMA selection %d", hw_config->dma);
printk195drivers/sound/pas2_card.cprintk ("PAS2: Invalid DMA selection %d", hw_config->dma);
printk247drivers/sound/pas2_card.cprintk("\n\nPAS16 Warning: Invalid SB DMA %d\n\n",
printk251drivers/sound/pas2_card.cprintk("\n\nPAS16 Warning: Invalid SB IRQ %d\n\n",
printk320drivers/sound/pas2_card.cprintk (" <%s rev %d>", pas_model_names[(int) pas_model], pas_read (BOARD_REV_ID));
printk61drivers/sound/pas2_midi.cprintk ("PAS2: Midi busy\n");
printk282drivers/sound/pas2_midi.cprintk ("MIDI framing error\n");
printk286drivers/sound/pas2_midi.cprintk ("MIDI output overrun %02x,%02x,%d \n", pas_read (MIDI_FIFO_STATUS), stat, ofifo_bytes);
printk120drivers/sound/pas2_mixer.cTRACE (printk ("static int pas_mixer_set(int whichDev = %d, unsigned int level = %X)\n", whichDev, level));
printk398drivers/sound/pas2_mixer.cTRACE (printk ("pas2_mixer.c: void pas_mixer_reset(void)\n"));
printk409drivers/sound/pas2_mixer.cTRACE (printk ("pas2_mixer.c: int pas_mixer_ioctl(unsigned int cmd = %X, unsigned int arg = %X)\n", cmd, arg));
printk128drivers/sound/pas2_pcm.cTRACE (printk ("pas2_pcm.c: static int pas_pcm_ioctl(unsigned int cmd = %X, unsigned int arg = %X)\n", cmd, arg));
printk191drivers/sound/pas2_pcm.cTRACE (printk ("pas2_pcm.c: static void pas_pcm_reset(void)\n"));
printk201drivers/sound/pas2_pcm.cTRACE (printk ("pas2_pcm.c: static int pas_pcm_open(int mode = %X)\n", mode));
printk222drivers/sound/pas2_pcm.cTRACE (printk ("pas2_pcm.c: static void pas_pcm_close(void)\n"));
printk240drivers/sound/pas2_pcm.cTRACE (printk ("pas2_pcm.c: static void pas_pcm_output_block(char *buf = %P, int count = %X)\n", buf, count));
printk287drivers/sound/pas2_pcm.cTRACE (printk ("pas2_pcm.c: static void pas_pcm_start_input(char *buf = %P, int count = %X)\n", buf, count));
printk354drivers/sound/pas2_pcm.cTRACE (printk ("pas2_pcm.c: long pas_pcm_init(long mem_start = %X)\n", mem_start));
printk386drivers/sound/pas2_pcm.cprintk ("PAS2: Too many PCM devices available\n");
printk419drivers/sound/pas2_pcm.cprintk ("PAS: Unexpected PCM interrupt\n");
printk91drivers/sound/patmgr.cprintk ("PATMGR%d: Invalid read count\n", dev);
printk128drivers/sound/patmgr.cprintk ("PATMGR%d: Write count < 4\n", dev);
printk148drivers/sound/patmgr.cprintk ("PATMGR%d: Invalid write count\n", dev);
printk184drivers/sound/patmgr.cprintk ("  PATMGR: Server %d mbox full. Why?\n", dev);
printk232drivers/sound/patmgr.cprintk ("  PATMGR: Server %d mbox full. Why?\n", dev);
printk104drivers/sound/sb_dsp.cprintk ("SoundBlaster: DSP Command(%02x) Timeout.\n", val);
printk105drivers/sound/sb_dsp.cprintk ("IRQ conflict???\n");
printk151drivers/sound/sb_dsp.cprintk ("+");
printk153drivers/sound/sb_dsp.cprintk ("%02x", data);
printk158drivers/sound/sb_dsp.cprintk ("SoundBlaster: Unexpected interrupt\n");
printk244drivers/sound/sb_dsp.cprintk ("SB Warning: High speed DSP not possible simultaneously with MIDI output\n");
printk305drivers/sound/sb_dsp.cprintk ("SB Warning: Stereo DSP not possible simultaneously with MIDI output\n");
printk340drivers/sound/sb_dsp.cprintk ("SB Error: Unable to start (high speed) DAC\n");
printk352drivers/sound/sb_dsp.cprintk ("SB Error: Unable to start DAC\n");
printk386drivers/sound/sb_dsp.cprintk ("SB Error: Unable to start (high speed) ADC\n");
printk398drivers/sound/sb_dsp.cprintk ("SB Error: Unable to start ADC\n");
printk462drivers/sound/sb_dsp.cprintk ("*** SB Error: Irq %d already in use\n", sbc_irq);
printk477drivers/sound/sb_dsp.cprintk ("SB Warning: IRQ%d test not passed!", sbc_irq);
printk493drivers/sound/sb_dsp.cprintk ("SB Error: SoundBlaster board not installed\n");
printk499drivers/sound/sb_dsp.cprintk ("SB: PCM not possible during MIDI input\n");
printk510drivers/sound/sb_dsp.cprintk("SB Warning: Incorrect IRQ setting %d\n",
printk520drivers/sound/sb_dsp.cprintk ("SB: DMA Busy\n");
printk699drivers/sound/sb_dsp.cprintk (" <%s>", sb_dsp_operations.name);
printk711drivers/sound/sb_dsp.cprintk ("SB: Too many DSP devices available\n");
printk68drivers/sound/sb_midi.cprintk ("SB Error: MIDI hardware not installed\n");
printk75drivers/sound/sb_midi.cprintk ("SoundBlaster: Midi input not currently supported\n");
printk89drivers/sound/sb_midi.cprintk ("SB Error: Midi output not possible during stereo or high speed audio\n");
printk140drivers/sound/sb_midi.cprintk ("SB Error: Unable to send a MIDI byte\n");
printk154drivers/sound/sb_midi.cprintk ("SoundBlaster: MIDI input not implemented.\n");
printk341drivers/sound/sb_mixer.cprintk("SB Warning: Unsupported mixer type\n");
printk163drivers/sound/sequencer.cDEB (printk ("sequencer_write(dev=%d, count=%d)\n", dev, count));
printk224drivers/sound/sequencer.cprintk ("Sequencer Error: Nonexistent MIDI device %d\n", dev);
printk234drivers/sound/sequencer.cprintk ("Sequencer Error: Unable to open Midi #%d\n", dev);
printk470drivers/sound/sequencer.cDEB (printk ("sequencer_open(dev=%d)\n", dev));
printk474drivers/sound/sequencer.cprintk ("Soundcard: Sequencer not initialized\n");
printk494drivers/sound/sequencer.cprintk ("Sequencer busy\n");
printk506drivers/sound/sequencer.cprintk ("Sequencer: Warning! Cannot open synth device #%d\n", i);
printk522drivers/sound/sequencer.cprintk ("Sequencer: No Midi devices. Input not possible\n");
printk585drivers/sound/sequencer.cDEB (printk ("sequencer_release(dev=%d)\n", dev));
printk701drivers/sound/sequencer.cprintk ("Sequencer Warning: Unexpected sleeping process\n");
printk216drivers/sound/soundcard.cDEB (printk ("sound_read(dev=%d, count=%d)\n", dev, count));
printk240drivers/sound/soundcard.cprintk ("Sound: Undefined minor device %d\n", dev);
printk254drivers/sound/soundcard.cDEB (printk ("sound_write(dev=%d, count=%d)\n", dev, count));
printk290drivers/sound/soundcard.cDEB (printk ("sound_open(dev=%d) : usecount=%d\n", dev, sbc_devices[dev].usecount));
printk294drivers/sound/soundcard.cprintk ("Invalid minor device %d\n", dev);
printk300drivers/sound/soundcard.cprintk ("SoundCard Error: The soundcard system has not been configured\n");
printk329drivers/sound/soundcard.cprintk ("Soundcard not installed\n");
printk354drivers/sound/soundcard.cprintk ("Invalid minor device %d\n", dev);
printk372drivers/sound/soundcard.cDEB (printk ("sound_release(dev=%d)\n", dev));
printk403drivers/sound/soundcard.cprintk ("Sound error: Releasing unknown device 0x%02x\n", dev);
printk419drivers/sound/soundcard.cDEB (printk ("sound_ioctl(dev=%d, cmd=0x%x, arg=0x%x)\n", dev, cmd, arg));
printk467drivers/sound/soundcard.cDEB (printk ("sound_select(dev=%d, type=0x%x)\n", dev, sel_type));
printk563drivers/sound/soundcard.cprintk ("Sound: IRQ%d already in use\n", interrupt_level);
printk136fs/binfmt_elf.cprintk("Using ELF interpreter %s\n", elf_interpreter);
printk147fs/binfmt_elf.cprintk("Interpreter: %x %x %x\n",N_MAGIC(ex), ex.a_text,ex.a_data);
printk111fs/buffer.cprintk ("Warning (IO error) - orphaned block %08x on %04x\n",
printk263fs/buffer.cprintk("VFS: Disk change detected on device %d/%d\n",
printk366fs/buffer.cprintk("VFS: Wrong blocksize on device %d/%d\n",
printk533fs/buffer.cprintk("VFS: brelse: Trying to free free buffer\n");
printk545fs/buffer.cprintk("VFS: bread: READ error on device %d/%d\n",
printk577fs/buffer.cprintk("VFS: breada: READ error on device %d/%d\n",
printk874fs/buffer.cprintk("VFS: grow_buffers: size = %d\n",size);
printk761fs/exec.cprintk("N_TXTOFF < BLOCK_SIZE. Please convert binary.");
printk766fs/exec.cprintk("N_TXTOFF != BLOCK_SIZE. See a.out.h.");
printk789fs/exec.cprintk("%s: executable not page aligned\n", current->comm);
printk868fs/exec.cprintk("N_TXTOFF < BLOCK_SIZE. Please convert library\n");
printk88fs/ext/dir.cprintk ("ext_readdir: bad dir entry, skipping\n");
printk89fs/ext/dir.cprintk ("dev=%d, dir=%d, offset=%d, rec_len=%d, name_len=%d\n",
printk83fs/ext/file.cprintk("ext_file_read: inode = NULL\n");
printk87fs/ext/file.cprintk("ext_file_read: mode = %07o\n",inode->i_mode);
printk204fs/ext/file.cprintk("ext_file_write: inode = NULL\n");
printk208fs/ext/file.cprintk("ext_file_write: mode = %07o\n",inode->i_mode);
printk53fs/ext/freelists.cprintk("trying to free block on non-existent device\n");
printk59fs/ext/freelists.cprintk("trying to free block not in datazone\n");
printk70fs/ext/freelists.cprintk("ext_free_block: block full, skipping to %d\n", block);
printk98fs/ext/freelists.cprintk("trying to get new block from non-existent device\n");
printk110fs/ext/freelists.cprintk("ext_new_block: block empty, skipping to %d\n", efb->next);
printk125fs/ext/freelists.cprintk ("ext_new_block: blk = %d\n", j);
printk126fs/ext/freelists.cprintk("allocating block not in data zone\n");
printk133fs/ext/freelists.cprintk("new_block: cannot get block");
printk141fs/ext/freelists.cprintk("ext_new_block: allocating block %d\n", j);
printk163fs/ext/freelists.cprintk ("ext_count_free: error while reading free blocks list\n");
printk173fs/ext/freelists.cprintk("ext_count_free_blocks: stored = %d, computed = %d\n",
printk194fs/ext/freelists.cprintk("free_inode: inode has no device\n");
printk198fs/ext/freelists.cprintk("free_inode: inode has count=%d\n",inode->i_count);
printk202fs/ext/freelists.cprintk("free_inode: inode has nlink=%d\n",inode->i_nlink);
printk206fs/ext/freelists.cprintk("free_inode: inode on non-existent device\n");
printk215fs/ext/freelists.cprintk("free_inode: inode 0 or non-existent inode\n");
printk224fs/ext/freelists.cprintk("ext_free_inode: inode full, skipping to %d\n", ino);
printk269fs/ext/freelists.cprintk("ext_free_inode: inode empty, skipping to %d\n", efi->next);
printk273fs/ext/freelists.cprintk ("efi->next = %d\n", efi->next);
printk301fs/ext/freelists.cprintk("ext_new_inode : allocating inode %d\n", inode->i_ino);
printk324fs/ext/freelists.cprintk ("u.ext_sb.s_firstfreeinodenumber = %d, ino = %d\n", 
printk330fs/ext/freelists.cprintk ("ext_count_free_inodes: error while reading free inodes list\n");
printk341fs/ext/freelists.cprintk("ext_count_free_inodes: stored = %d, computed = %d\n",
printk69fs/ext/inode.cprintk("EXT-fs: unable to read superblock\n");
printk90fs/ext/inode.cprintk("VFS: Can't find an extfs filesystem on dev 0x%04x.\n",
printk99fs/ext/inode.cprintk("ext_read_super: unable to read first free block\n");
printk109fs/ext/inode.cprintk("ext_read_super: unable to read first free inode block\n");
printk122fs/ext/inode.cprintk("EXT-fs: get root inode failed\n");
printk134fs/ext/inode.cprintk ("ext_write_super: bread failed\n");
printk182fs/ext/inode.cprintk("ext_bmap: block<0");
printk186fs/ext/inode.cprintk("ext_bmap: block>big");
printk309fs/ext/inode.cprintk("ext_getblk: block<0\n");
printk313fs/ext/inode.cprintk("ext_getblk: block>big\n");
printk434fs/ext/inode.cprintk ("IO error syncing ext inode [%04x:%08x]\n",
printk128fs/ext/namei.cprintk ("ext_find_entry: bad dir entry\n");
printk129fs/ext/namei.cprintk ("dev=%d, dir=%d, offset=%d, rec_len=%d, name_len=%d\n",
printk225fs/ext/namei.cprintk ("ext_add_entry: skipping to next block\n");
printk257fs/ext/namei.cprintk ("ext_add_entry : creating next block\n");
printk276fs/ext/namei.cprintk ("ext_addr_entry: bad dir entry\n");
printk277fs/ext/namei.cprintk ("dev=%d, dir=%d, offset=%d, rec_len=%d, name_len=%d\n",
printk481fs/ext/namei.cprintk("warning - bad directory on dev %04x\n",inode->i_dev);
printk488fs/ext/namei.cprintk("warning - bad directory on dev %04x\n",inode->i_dev);
printk505fs/ext/namei.cprintk ("empty_dir: bad dir entry\n");
printk506fs/ext/namei.cprintk ("dev=%d, dir=%d, offset=%d, rec_len=%d, name_len=%d\n",
printk566fs/ext/namei.cprintk("empty directory has nlink!=2 (%d)\n",inode->i_nlink);
printk606fs/ext/namei.cprintk("Deleting nonexistent file (%04x:%d), %d\n",
printk252fs/ext/truncate.cprintk("ext_release not implemented\n");
printk241fs/ext2/balloc.cprintk ("ext2_free_block: nonexistent device");
printk319fs/ext2/balloc.cprintk ("ext2_new_block: nonexistent device");
printk537fs/ext2/balloc.cprintk ("ext2_count_free_block: "
printk552fs/ext2/balloc.cprintk ("Cannot load bitmap for group %d\n", i);
printk554fs/ext2/balloc.cprintk ("group %d: stored = %d, counted = %lu\n",
printk564fs/ext2/balloc.cprintk("ext2_count_free_blocks: stored = %lu, computed = %lu, %lu\n",
printk105fs/ext2/dcache.cprintk ("%s: cache status\n", func_name);
printk107fs/ext2/dcache.cprintk ("dev:%04x, dir=%4lu, name=%s\n",
printk216fs/ext2/dcache.cprintk ("dcache_lookup (%04x, %lu, %s, %d)\n", dev, dir, our_name, len);
printk230fs/ext2/dcache.cprintk ("dcache_lookup: %s,hit,inode=%lu,hits=%d,misses=%d\n",
printk238fs/ext2/dcache.cprintk ("dcache_lookup: %s,miss,hits=%d,misses=%d\n",
printk261fs/ext2/dcache.cprintk ("dcache_add (%04x, %lu, %s, %d, %lu)\n",
printk321fs/ext2/dcache.cprintk ("dcache_remove (%04x, %lu, %s, %d)\n", dev, dir, name, len);
printk87fs/ext2/file.cprintk ("ext2_file_read: inode = NULL\n");
printk216fs/ext2/file.cprintk("ext2_file_write: inode = NULL\n");
printk210fs/ext2/ialloc.cprintk ("ext2_free_inode: inode has no device\n");
printk214fs/ext2/ialloc.cprintk ("ext2_free_inode: inode has count=%d\n",
printk219fs/ext2/ialloc.cprintk ("ext2_free_inode: inode has nlink=%d\n",
printk224fs/ext2/ialloc.cprintk("ext2_free_inode: inode on nonexistent device\n");
printk518fs/ext2/ialloc.cprintk ("ext2_count_free_inodes: Descriptor not loaded\n");
printk530fs/ext2/ialloc.cprintk ("Cannot load inode bitmap for group %d (bitmap = %d)\n",
printk533fs/ext2/ialloc.cprintk ("group %d: stored = %d, counted = %lu\n",
printk543fs/ext2/ialloc.cprintk("ext2_count_free_inodes: stored = %lu, computed = %lu, %lu\n",
printk488fs/ext2/inode.cprintk ("IO error syncing ext2 inode [%04x:%08lx]\n",
printk44fs/ext2/super.cprintk (
printk80fs/ext2/super.cprintk (
printk141fs/ext2/super.cprintk ("Cannot read descriptor blocks while converting !\n");
printk194fs/ext2/super.cprintk ("EXT2-fs: Unrecognized mount option %s\n", this_char);
printk227fs/ext2/super.cprintk ("EXT2-fs: unable to read superblock\n");
printk244fs/ext2/super.cprintk ("VFS: Can't find an ext2 filesystem on dev 0x%04x.\n",
printk268fs/ext2/super.cprintk ("EXT2-fs: Magic mismatch, very weird !\n");
printk298fs/ext2/super.cprintk ("EXT2-fs: trying to mount a pre-0.2b file"
printk302fs/ext2/super.cprintk ("EXT2-fs: mounting a pre 0.2b file system, "
printk308fs/ext2/super.cprintk ("EXT2-fs: cannot convert a read-only fs\n");
printk315fs/ext2/super.cprintk ("EXT2-fs: conversion failed !!!\n");
printk318fs/ext2/super.cprintk ("EXT2-fs: conversion succeeded !!!\n");
printk327fs/ext2/super.cprintk ("VFS: Can't find an ext2 filesystem on dev 0x%04x.\n",
printk336fs/ext2/super.cprintk ("VFS: Unsupported blocksize on dev 0x%04x.\n",
printk345fs/ext2/super.cprintk ("EXT2-fs: fragsize %lu != blocksize %lu (not supported yet)\n",
printk362fs/ext2/super.cprintk ("EXT2-fs: file system is too big\n");
printk374fs/ext2/super.cprintk ("EXT2-fs: unable to read group descriptors\n");
printk396fs/ext2/super.cprintk ("EXT2-fs: get root inode failed\n");
printk416fs/ext2/super.cprintk ("EXT2-fs warning: mounting unchecked file system, "
printk419fs/ext2/super.cprintk ("EXT2-fs warning: mounting file system with errors, "
printk422fs/ext2/super.cprintk ("EXT2-fs warning: maximal mount count reached, "
printk425fs/ext2/super.cprintk ("[EXT II FS %s, %s, bs=%lu, fs=%lu, gc=%lu, bpg=%lu, ipg=%lu]\n",
printk505fs/ext2/super.cprintk ("EXT2-fs warning: remounting unchecked fs, "
printk508fs/ext2/super.cprintk ("EXT2-fs warning: remounting fs with errors, "
printk511fs/ext2/super.cprintk ("EXT2-fs warning: maximal mount count reached, "
printk323fs/ext2/truncate.cprintk ("ext2_release not implemented\n");
printk351fs/hpfs/hpfs_fs.cprintk("HPFS: syntax error in mount options.  Not mounted.\n");
printk391fs/hpfs/hpfs_fs.cprintk("HPFS: hpfs_read_super: Not HPFS\n");
printk432fs/hpfs/hpfs_fs.cprintk("HPFS: Proceeding, but operation may be unreliable\n");
printk482fs/hpfs/hpfs_fs.cprintk("HPFS: hpfs_read_super: inode get failed\n");
printk495fs/hpfs/hpfs_fs.cprintk("HPFS: "
printk524fs/hpfs/hpfs_fs.cprintk("HPFS: %s %s. Please %s\n", p1, p2, p3);
printk628fs/hpfs/hpfs_fs.cprintk("HPFS: read_inode: bad ino\n");
printk688fs/hpfs/hpfs_fs.cprintk("HPFS: read_inode: no fnode\n");
printk825fs/hpfs/hpfs_fs.cprintk("HPFS: bit map pointer missing\n");
printk1083fs/hpfs/hpfs_fs.cprintk("HPFS: bplus_lookup: sector not found\n");
printk1590fs/hpfs/hpfs_fs.cprintk("HPFS: missing fnode\n");
printk1597fs/hpfs/hpfs_fs.cprintk("HPFS: map_fnode: bad fnode pointer\n");
printk1612fs/hpfs/hpfs_fs.cprintk("HPFS: missing anode\n");
printk1619fs/hpfs/hpfs_fs.cprintk("HPFS: map_anode: bad anode pointer\n");
printk1634fs/hpfs/hpfs_fs.cprintk("HPFS: missing dnode\n");
printk1641fs/hpfs/hpfs_fs.cprintk("HPFS: map_dnode: bad dnode pointer\n");
printk1657fs/hpfs/hpfs_fs.cprintk("HPFS: map_sector: read error\n");
printk1671fs/hpfs/hpfs_fs.cprintk("HPFS: map_4sectors: unaligned read\n");
printk1711fs/hpfs/hpfs_fs.cprintk("HPFS: map_4sectors: read error\n");
printk277fs/inode.cprintk("VFS: inode busy on removed device %d/%d\n", MAJOR(dev), MINOR(dev));
printk305fs/inode.cprintk("VFS: iput: trying to free free inode\n");
printk306fs/inode.cprintk("VFS: device %d/%d, inode %lu, mode=0%07o\n",
printk366fs/inode.cprintk("VFS: No free inodes - contact Linus\n");
printk385fs/inode.cprintk ("VFS: get_empty_inode: bad free inode count.\n");
printk89fs/isofs/dir.cprintk("Block, offset: %x %x %x\n",
printk165fs/isofs/dir.cprintk("Backlink not properly set.\n");
printk204fs/isofs/dir.cprintk("Nchar: %d\n",i);
printk125fs/isofs/file.cprintk("isofs_file_read: inode = NULL\n");
printk129fs/isofs/file.cprintk("isofs_file_read: mode = %07o\n",inode->i_mode);
printk44fs/isofs/inode.cprintk("Outstanding mallocs:%d, outstanding buffers: %d\n", 
printk160fs/isofs/inode.cprintk("isofs_read_super: bread failed, dev 0x%x iso_blknum %d\n",
printk197fs/isofs/inode.cprintk("Unable to identify CD-ROM format.\n");
printk207fs/isofs/inode.cprintk("Multi-volume disks not (yet) supported.\n");
printk216fs/isofs/inode.cprintk("Multi-volume disks not (yet) supported.\n");
printk238fs/isofs/inode.cprintk("1 <<Block bits != Block size\n");
printk244fs/isofs/inode.cprintk("Max size:%ld   Log zone size:%ld\n",
printk247fs/isofs/inode.cprintk("First datazone:%ld   Root inode number %d\n",
printk250fs/isofs/inode.cif(high_sierra) printk("Disc in High Sierra format.\n");
printk267fs/isofs/inode.cprintk("get root inode failed\n");
printk316fs/isofs/inode.cprintk("_isofs_bmap: block<0");
printk380fs/isofs/inode.cprintk("Warning: defective cdrom.  Enabling \"cruft\" mount option.\n");
printk395fs/isofs/inode.cprintk("Multi volume CD somehow got mounted.\n");
printk399fs/isofs/inode.cprintk("Interleaved files not (yet) supported.\n");
printk407fs/isofs/inode.cprintk("Extended attributes present for ISO file (%ld).\n",
printk415fs/isofs/inode.cprintk("File unit size != 0 for ISO file (%ld).\n",inode->i_ino);
printk421fs/isofs/inode.cprintk("Unusual flag settings for ISO file (%ld %x).\n",
printk426fs/isofs/inode.cprintk("Get inode %d: %d %d: %d\n",inode->i_ino, block, 
printk460fs/isofs/inode.cprintk("Inode: %x extent: %x\n",inode->i_ino, inode->u.isofs_i.i_first_extent);
printk531fs/isofs/inode.cprintk(".. Directory not in first block"
printk545fs/isofs/inode.cprintk("Parent dir:%x\n",parent_dir);
printk624fs/isofs/inode.cprintk("Resultant Inode %d\n",result);
printk43fs/isofs/namei.cif (len <= 2) printk("Match: %d %d %s %d %d \n",len,dlen,compare,de->name[0], dlen);
printk143fs/isofs/namei.cprintk("Doing .. (%d %d)",
printk194fs/isofs/namei.cprintk("Backlink not properly set.\n");
printk217fs/isofs/namei.cprintk("lookup: %x %d\n",dir->i_ino, len);
printk77fs/isofs/rock.cprintk("Unable to read rock-ridge attributes\n");    \
printk125fs/isofs/rock.cprintk("RR: CL\n");
printk134fs/isofs/rock.cprintk("RR: PL\n");
printk193fs/isofs/rock.cprintk("Unsupported NM flag settings (%d)\n",rr->u.NM.flags);
printk216fs/isofs/rock.cprintk("RR: RE (%x)\n", inode->i_ino);
printk274fs/isofs/rock.cprintk("ISO9660 Extensions: ");
printk276fs/isofs/rock.cfor(p=0;p<rr->u.ER.len_id;p++) printk("%c",rr->u.ER.data[p]);
printk278fs/isofs/rock.cprintk("\n");
printk321fs/isofs/rock.cprintk("Symlink component flag not implemented\n");
printk332fs/isofs/rock.cprintk("Attempt to read inode for relocated directory\n");
printk336fs/isofs/rock.cprintk("RR CL (%x)\n",inode->i_ino);
printk456fs/isofs/rock.cprintk("Symlink component flag not implemented (%d)\n",slen);
printk74fs/minix/bitmap.cprintk("trying to free block on nonexistent device\n");
printk79fs/minix/bitmap.cprintk("trying to free block not in datazone\n");
printk91fs/minix/bitmap.cprintk("minix_free_block: nonexistent bitmap buffer\n");
printk95fs/minix/bitmap.cprintk("free_block (%04x:%d): bit already cleared\n",sb->s_dev,block);
printk106fs/minix/bitmap.cprintk("trying to get new block from nonexistent device\n");
printk118fs/minix/bitmap.cprintk("new_block: bit already set");
printk127fs/minix/bitmap.cprintk("new_block: cannot get block");
printk151fs/minix/bitmap.cprintk("free_inode: inode has no device\n");
printk155fs/minix/bitmap.cprintk("free_inode: inode has count=%d\n",inode->i_count);
printk159fs/minix/bitmap.cprintk("free_inode: inode has nlink=%d\n",inode->i_nlink);
printk163fs/minix/bitmap.cprintk("free_inode: inode on nonexistent device\n");
printk167fs/minix/bitmap.cprintk("free_inode: inode 0 or nonexistent inode\n");
printk172fs/minix/bitmap.cprintk("free_inode: nonexistent imap in superblock\n");
printk177fs/minix/bitmap.cprintk("free_inode: bit %lu already cleared.\n",ino);
printk203fs/minix/bitmap.cprintk("new_inode: bit already set");
printk77fs/minix/file.cprintk("minix_file_read: inode = NULL\n");
printk81fs/minix/file.cprintk("minix_file_read: mode = %07o\n",inode->i_mode);
printk196fs/minix/file.cprintk("minix_file_write: inode = NULL\n");
printk200fs/minix/file.cprintk("minix_file_write: mode = %07o\n",inode->i_mode);
printk66fs/minix/inode.cprintk("MINIX-fs: unable to read superblock\n");
printk91fs/minix/inode.cprintk("VFS: Can't find a minix filesystem on dev 0x%04x.\n",
printk117fs/minix/inode.cprintk("MINIX-fs: bad superblock or unable to read bitmaps\n");
printk129fs/minix/inode.cprintk("MINIX-fs: get root inode failed\n");
printk171fs/minix/inode.cprintk("minix_bmap: block<0");
printk175fs/minix/inode.cprintk("minix_bmap: block>big");
printk285fs/minix/inode.cprintk("minix_getblk: block<0");
printk289fs/minix/inode.cprintk("minix_getblk: block>big");
printk330fs/minix/inode.cprintk("Bad inode number on dev 0x%04x: %d is out of range\n",
printk338fs/minix/inode.cprintk("Major problem: unable to read inode from dev 0x%04x\n",
printk378fs/minix/inode.cprintk("Bad inode number on dev 0x%04x: %d is out of range\n",
printk386fs/minix/inode.cprintk("unable to read i-node block\n");
printk426fs/minix/inode.cprintk ("IO error syncing minix inode [%04x:%08lx]\n",
printk427fs/minix/namei.cprintk("Bad directory on device %04x\n",inode->i_dev);
printk470fs/minix/namei.cprintk("empty directory has nlink!=2 (%d)\n",inode->i_nlink);
printk520fs/minix/namei.cprintk("Deleting nonexistent file (%04x:%lu), %d\n",
printk33fs/msdos/fat.cprintk("bread in fat_access failed\n");
printk44fs/msdos/fat.cprintk("bread in fat_access failed\n");
printk125fs/msdos/fat.cprintk("cache lookup: <%d,%d> %d (%d,%d) -> ",inode->i_dev,inode->i_ino,cluster,
printk134fs/msdos/fat.cprintk("cache hit: %d (%d)\n",walk->file_cluster,*d_clu);
printk139fs/msdos/fat.cprintk("cache miss\n");
printk151fs/msdos/fat.cprintk("<%d,%d>(%d,%d) ",walk->device,walk->ino,
printk153fs/msdos/fat.celse printk("-- ");
printk155fs/msdos/fat.cprintk("\n");
printk165fs/msdos/fat.cprintk("cache add: <%d,%d> %d (%d)\n",inode->i_dev,inode->i_ino,f_clu,d_clu);
printk172fs/msdos/fat.cprintk("FAT cache corruption");
printk269fs/msdos/fat.cprintk("fat_free: skipped EOF\n");
printk91fs/msdos/file.cprintk("msdos_file_read: inode = NULL\n");
printk95fs/msdos/file.cprintk("msdos_file_read: mode = %07o\n",inode->i_mode);
printk145fs/msdos/file.cprintk("msdos_file_write: inode = NULL\n");
printk149fs/msdos/file.cprintk("msdos_file_write: mode = %07o\n",inode->i_mode);
printk35fs/msdos/inode.cprintk("Invalid link (0x%X): expected 0x%X, got 0x%X\n",
printk167fs/msdos/inode.cprintk("MSDOS bread failed\n");
printk222fs/msdos/inode.cprintk("[MS-DOS FS Rel. 12,FAT %d,check=%c,conv=%c,"
printk226fs/msdos/inode.cprintk("[me=0x%x,cs=%d,#f=%d,fs=%d,fl=%d,ds=%d,de=%d,data=%d,"
printk235fs/msdos/inode.cprintk("VFS: Can't find a valid MSDOS filesystem on dev 0x%04x.\n",
printk255fs/msdos/inode.cprintk("get root inode failed\n");
printk336fs/msdos/inode.cprintk("dev = 0x%04X, ino = %ld\n",inode->i_dev,inode->i_ino);
printk350fs/msdos/inode.cprintk("directory %d: i_nlink == 0\n",inode->i_ino);
printk360fs/msdos/inode.cprintk("Directory %ld: bad FAT\n",
printk399fs/msdos/inode.cprintk("dev = 0x%04X, ino = %ld\n",inode->i_dev,inode->i_ino);
printk36fs/msdos/misc.cprintk("Filesystem panic (dev 0x%04X, mounted on 0x%04X:%ld)\n  %s\n",
printk39fs/msdos/misc.cprintk("  File system has been set read-only\n");
printk62fs/msdos/misc.cprintk("Invalid conversion mode - defaulting to "
printk125fs/msdos/misc.cprintk("free cluster: %d\n",nr);
printk140fs/msdos/misc.cprintk("set to %x\n",fat_access(inode->i_sb,nr,-1));
printk153fs/msdos/misc.cprintk("last = %d\n",last);
printk161fs/msdos/misc.cif (last) printk("next set to %d\n",fat_access(inode->i_sb,last,-1));
printk168fs/msdos/misc.cprintk("zeroing sector %d\n",sector);
printk174fs/msdos/misc.cprintk("getblk failed\n");
printk184fs/msdos/misc.cprintk("msdos_sread failed\n");
printk202fs/msdos/misc.cprintk("size is %d now (%x)\n",inode->i_size,inode);
printk283fs/msdos/misc.cprintk("Directory sread (sector %d) failed\n",sector);
printk411fs/msdos/misc.cprintk("raw_scan_nonroot: start=%d\n",start);
printk425fs/msdos/misc.cprintk("next start: %d\n",start);
printk228fs/msdos/namei.cprintk("[");
printk230fs/msdos/namei.cprintk("%d ",start);
printk233fs/msdos/namei.cprintk("ERROR");
printk238fs/msdos/namei.cprintk("]\n");
printk99fs/nfs/dir.cprintk("nfs_readdir: inode is NULL or not a directory\n");
printk297fs/nfs/dir.cprintk("nfs_lookup: inode is NULL or not a directory\n");
printk338fs/nfs/dir.cprintk("nfs_create: inode is NULL or not a directory\n");
printk372fs/nfs/dir.cprintk("nfs_mknod: inode is NULL or not a directory\n");
printk403fs/nfs/dir.cprintk("nfs_mkdir: inode is NULL or not a directory\n");
printk427fs/nfs/dir.cprintk("nfs_rmdir: inode is NULL or not a directory\n");
printk447fs/nfs/dir.cprintk("nfs_unlink: inode is NULL or not a directory\n");
printk469fs/nfs/dir.cprintk("nfs_symlink: inode is NULL or not a directory\n");
printk496fs/nfs/dir.cprintk("nfs_link: old inode is NULL\n");
printk502fs/nfs/dir.cprintk("nfs_link: dir is NULL or not a directory\n");
printk527fs/nfs/dir.cprintk("nfs_rename: old inode is NULL or not a directory\n");
printk533fs/nfs/dir.cprintk("nfs_rename: new inode is NULL or not a directory\n");
printk566fs/nfs/dir.cprintk("nfs_refresh_inode: inode or fattr is NULL\n");
printk570fs/nfs/dir.cprintk("nfs_refresh_inode: inode number mismatch\n");
printk74fs/nfs/file.cprintk("nfs_file_read: inode = NULL\n");
printk78fs/nfs/file.cprintk("nfs_file_read: read from non-file, mode %07o\n",
printk125fs/nfs/file.cprintk("nfs_file_write: inode = NULL\n");
printk129fs/nfs/file.cprintk("nfs_file_write: write to non-file, mode %07o\n",
printk71fs/nfs/inode.cprintk("nfs_read_super: missing data argument\n");
printk77fs/nfs/inode.cprintk("nfs warning: mount version %s than kernel\n",
printk81fs/nfs/inode.cprintk("nfs_read_super: invalid file descriptor\n");
printk86fs/nfs/inode.cprintk("nfs_read_super: not a socket\n");
printk123fs/nfs/inode.cprintk("nfs_read_super: get root inode failed\n");
printk138fs/nfs/inode.cprintk("nfs_statfs: statfs error = %d\n", -error);
printk169fs/nfs/inode.cprintk("nfs_fhget: super block is NULL\n");
printk176fs/nfs/inode.cprintk("nfs_fhget: getattr error = %d\n", -error);
printk182fs/nfs/inode.cprintk("nfs_fhget: iget failed\n");
printk187fs/nfs/inode.cprintk("nfs_fhget: unexpected inode from iget\n");
printk31fs/nfs/proc.c#define PRINTK if (proc_debug) printk
printk33fs/nfs/proc.c#define PRINTK if (0) printk
printk268fs/nfs/proc.cprintk("nfs_proc_readlink: giant pathname\n");
printk302fs/nfs/proc.cprintk("nfs_proc_read: giant data size\n"); 
printk557fs/nfs/proc.cprintk("nfs_proc_readdir: giant filename\n");
printk643fs/nfs/proc.cprintk("nfs_rpc_verify: not an RPC reply: %d\n", n);
printk647fs/nfs/proc.cprintk("nfs_rpc_verify: RPC call rejected: %d\n", n);
printk654fs/nfs/proc.cprintk("nfs_rpc_verify: bad RPC authentication type: %d\n", n);
printk658fs/nfs/proc.cprintk("nfs_rpc_verify: giant auth size\n");
printk663fs/nfs/proc.cprintk("nfs_rpc_verify: RPC call failed: %d\n", n);
printk714fs/nfs/proc.cprintk("nfs_stat_to_errno: bad nfs status return value: %d\n", stat);
printk62fs/nfs/sock.cprintk("nfs_rpc_call: socki_lookup failed\n");
printk86fs/nfs/sock.cprintk("nfs_rpc_call: send error = %d\n", result);
printk110fs/nfs/sock.cprintk("NFS server %s not responding, "
printk119fs/nfs/sock.cprintk("NFS server %s not responding, "
printk137fs/nfs/sock.cprintk("nfs_rpc_call: bad select ready\n");
printk143fs/nfs/sock.cprintk("nfs_rpc_call: server playing coy\n");
printk148fs/nfs/sock.cprintk("nfs_rpc_call: recv error = %d\n",
printk155fs/nfs/sock.cprintk("NFS server %s OK\n", server_name);
printk159fs/nfs/sock.cprintk("nfs_rpc_call: XID mismatch\n");
printk424fs/open.cprintk("VFS: Close: file count is 0\n");
printk408fs/proc/array.cprintk("get_maps: end(%d) < sz(%d)\n", end, sz);
printk55fs/proc/inode.cprintk("get root inode failed\n");
printk18fs/stat.cprintk("VFS: Warning: %s using old stat() call. Recompile your binary.\n",
printk113fs/super.cprintk("VFS: Root device %d/%d: prepare for armageddon\n",
printk120fs/super.cprintk("VFS: Mounted device %d/%d - tssk, tssk\n",
printk141fs/super.cprintk("VFS: on device %d/%d: get_fs_type(%s) failed\n",
printk195fs/super.cprintk("VFS: put_unnamed_dev: freeing unused device %d/%d\n",
printk222fs/super.cprintk("VFS: umount(%d/%d): mounted inode has i_mount=NULL\n",
printk497fs/super.cprintk(KERN_NOTICE "VFS: Insert root floppy and press ENTER\n");
printk511fs/super.cprintk ("VFS: Mounted root (%s filesystem)%s.\n",
printk123fs/xiafs/bitmap.cprintk("XIA-FS: bad inode/zone number (%s %d)\n", WHERE_ERR);
printk143fs/xiafs/bitmap.cprintk("XIA-FS: read bitmap failed (%s %d)\n", WHERE_ERR);
printk227fs/xiafs/bitmap.cprintk(INTERN_ERR);
printk232fs/xiafs/bitmap.cprintk("XIA-FS: bad zone number (%s %d)\n", WHERE_ERR);
printk245fs/xiafs/bitmap.cprintk("XIA-FS: dev %04x"
printk258fs/xiafs/bitmap.cprintk(INTERN_ERR);
printk271fs/xiafs/bitmap.cprintk("XIA-FS: I/O error (%s %d)\n", WHERE_ERR);
printk275fs/xiafs/bitmap.cprintk(INTERN_ERR);
printk295fs/xiafs/bitmap.cprintk("XIA-FS: bad inode (%s %d)\n", WHERE_ERR);
printk305fs/xiafs/bitmap.cprintk("XIA-FS: dev %04x"
printk91fs/xiafs/dir.cprintk("XIA-FS: bad directory entry (%s %d)\n", WHERE_ERR);
printk114fs/xiafs/dir.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk80fs/xiafs/file.cprintk("XIA-FS: inode = NULL (%s %d)\n", WHERE_ERR);
printk84fs/xiafs/file.cprintk("XIA-FS: mode != regular (%s %d)\n", WHERE_ERR);
printk197fs/xiafs/file.cprintk("XIA-FS: inode = NULL (%s %d)\n", WHERE_ERR);
printk201fs/xiafs/file.cprintk("XIA-FS: mode != regular (%s %d)\n", WHERE_ERR);
printk74fs/xiafs/inode.cprintk("XIA-FS: read super_block failed (%s %d)\n", WHERE_ERR);
printk84fs/xiafs/inode.cprintk("VFS: Can't find a xiafs filesystem on dev 0x%04x.\n",
printk154fs/xiafs/inode.cprintk("XIA-FS: read bitmaps failed (%s %d)\n", WHERE_ERR);
printk190fs/xiafs/inode.cprintk("XIA-FS: block < 0 (%s %d)\n", WHERE_ERR);
printk194fs/xiafs/inode.cprintk("XIA-FS: zone > big (%s %d)\n", WHERE_ERR);
printk320fs/xiafs/inode.cprintk("XIA-FS: zone < 0 (%s %d)\n", WHERE_ERR);
printk325fs/xiafs/inode.cprintk("XIA-FS: zone > big (%s %d)\n", WHERE_ERR);
printk373fs/xiafs/inode.cprintk("XIA-FS: bad inode number (%s %d)\n", WHERE_ERR);
printk380fs/xiafs/inode.cprintk("XIA-FS: read i-node zone failed (%s %d)\n", WHERE_ERR);
printk427fs/xiafs/inode.cprintk("XIA-FS: write_inode on a read-only filesystem (%s %d)\n", WHERE_ERR);
printk434fs/xiafs/inode.cprintk("XIA-FS: bad inode number (%s %d)\n", WHERE_ERR);
printk442fs/xiafs/inode.cprintk("XIA-FS: read i-node zone failed (%s %d)\n", WHERE_ERR);
printk493fs/xiafs/inode.cprintk ("IO error syncing xiafs inode [%04X:%lu]\n",
printk71fs/xiafs/namei.cprintk("XIA-FS: bad dir size (%s %d)\n", WHERE_ERR);
printk82fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk108fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk166fs/xiafs/namei.cprintk("XIA-FS: bad dir size (%s %d)\n", WHERE_ERR);
printk178fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk200fs/xiafs/namei.cprintk("XIA-FS: bad directory entry (%s %d)\n", WHERE_ERR);
printk236fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk411fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk420fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk426fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk432fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk449fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk472fs/xiafs/namei.cprintk("XIA-FS: bad directory entry (%s %d)\n", WHERE_ERR);
printk478fs/xiafs/namei.cprintk("XIA-FS: bad directory entry (%s %d)\n", WHERE_ERR);
printk519fs/xiafs/namei.cprintk("XIA-FS: empty directory has nlink!=2 (%s %d)\n", WHERE_ERR);
printk565fs/xiafs/namei.cprintk("XIA-FS: Deleting nonexistent file (%s %d)\n", WHERE_ERR);
printk25ibcs/emulate.cprintk("lcall 7,xxx: eax = %08lx\n",regs->eax);
printk61include/linux/ext2_fs.hprintk ("EXT2-fs DEBUG (%s, %d): %s:", \
printk63include/linux/ext2_fs.hprintk (f, ## a); \
printk55include/linux/kernel.hasmlinkage int printk(const char * fmt, ...)
printk402include/linux/sched.hprintk("add_wait_queue (%08x): wait->next = %08x\n",pc,(unsigned long) wait->next);
printk448include/linux/sched.hprintk("removed wait_queue not on list.\n");
printk449include/linux/sched.hprintk("list = %08x, queue = %08x\n",(unsigned long) p, (unsigned long) wait);
printk451include/linux/sched.hprintk("eip = %08x\n",ok);
printk226init/main.cprintk("Calibrating delay loop.. ");
printk238init/main.cprintk("ok - %lu.%02lu BogoMips (tm)\n",
printk244init/main.cprintk("failed\n");
printk328init/main.cprintk("387 failed: trying to reset\n");
printk409init/main.cprintk("Checking 386/387 coupling... ");
printk420init/main.cprintk("Ok, fpu using %s error reporting.\n",
printk425init/main.cprintk("No coprocessor found and no math emulation present.\n");
printk426init/main.cprintk("Giving up.\n");
printk432init/main.cprintk(linux_banner);
printk445ipc/sem.cprintk ("semop : no undo for op %d\n", i);
printk479ipc/sem.cprintk ("sem_exit undo list error id=%d\n", u->semid);
printk163ipc/shm.cprintk ("shm nono: killseg called on unused seg id=%d\n", id);
printk175ipc/shm.cprintk ("shm nono: killseg shp->pages=NULL. id=%d\n", id);
printk488ipc/shm.cprintk("detach: shm segment (id=%d) attach list inconsistent\n",id);
printk561ipc/shm.cprintk("shm_fork: unused id=%d PANIC\n", id);
printk585ipc/shm.cprintk ("shm_no_page: id=%d too big. proc mem corruptedn", id);
printk590ipc/shm.cprintk ("shm_no_page: id=%d invalid. Race.\n", id);
printk595ipc/shm.cprintk ("shm_no_page : too large page index. id=%d\n", id);
printk685ipc/shm.cprintk ("shm_swap: id=%ld does not match shmd\n", id);
printk690ipc/shm.cprintk ("shm_swap: too large idx=%ld id=%ld PANIC\n",idx, id);
printk695ipc/shm.cprintk("shm_swap: bad pgtbl! id=%ld start=%lx idx=%ld\n", 
printk80kernel/dma.cprintk("Trying to free DMA%d\n", dmanr);
printk85kernel/dma.cprintk("Trying to free free DMA%d\n", dmanr);
printk85kernel/exit.cprintk("task releasing itself\n");
printk133kernel/exit.cprintk("Warning, pid %d's parent link is bad\n",
printk136kernel/exit.cprintk("Warning, pid %d's child link is bad\n",
printk139kernel/exit.cprintk("Warning, pid %d's ys link is bad\n",
printk142kernel/exit.cprintk("Warning, pid %d's os link is bad\n",
printk145kernel/exit.cprintk("Warning, pid %d parent link points to self\n",
printk148kernel/exit.cprintk("Warning, pid %d child link points to self\n",
printk151kernel/exit.cprintk("Warning, pid %d ys link points to self\n",
printk154kernel/exit.cprintk("Warning, pid %d os link points to self\n",
printk158kernel/exit.cprintk(
printk163kernel/exit.cprintk(
printk169kernel/exit.cprintk(
printk174kernel/exit.cprintk(
printk180kernel/exit.cprintk(
printk184kernel/exit.cprintk(
printk37kernel/ioport.cprintk("%4d [%3x]: ", 64*i, 64*i);
printk38kernel/ioport.cprintk("%s ", ios(current->tss.io_bitmap[j++]));
printk40kernel/ioport.cprintk("%s", ios(current->tss.io_bitmap[j++]));
printk41kernel/ioport.cprintk("\n");
printk124kernel/ioport.cprintk("io: from=%d num=%d %s\n", from, num, (turn_on ? "on" : "off"));
printk110kernel/irq.cprintk ("irq.c:bad bottom half entry\n");
printk268kernel/irq.cprintk("Trying to free IRQ%d\n",irq);
printk272kernel/irq.cprintk("Trying to free free IRQ%d\n",irq);
printk327kernel/irq.cprintk("Unable to get IRQ2 for cascade\n");
printk329kernel/irq.cprintk("Unable to get IRQ13 for math-error handler\n");
printk62kernel/module.cprintk("module `%s' (%lu pages @ 0x%08lx) created\n",
printk90kernel/module.cprintk( "initializing module `%s', %d (0x%x) bytes\n",
printk100kernel/module.cprintk( "  init enty @ 0x%08lx, cleanup entry @ 0x%08lx\n",
printk28kernel/panic.cprintk(KERN_EMERG "Kernel panic: %s\n",buf);
printk30kernel/panic.cprintk(KERN_EMERG "In swapper task - not syncing\n");
printk171kernel/sched.cprintk("math-emulation not enabled and no coprocessor found.\n");
printk172kernel/sched.cprintk("killing %s.\n",current->comm);
printk310kernel/sched.cprintk("wait_queue is bad (eip = %08lx)\n",((unsigned long *) q)[-1]);
printk311kernel/sched.cprintk("        q = %p\n",q);
printk312kernel/sched.cprintk("       *q = %p\n",*q);
printk313kernel/sched.cprintk("      tmp = %p\n",tmp);
printk336kernel/sched.cprintk("wait_queue is bad (eip = %08lx)\n",((unsigned long *) q)[-1]);
printk337kernel/sched.cprintk("        q = %p\n",q);
printk338kernel/sched.cprintk("       *q = %p\n",*q);
printk339kernel/sched.cprintk("      tmp = %p\n",tmp);
printk510kernel/sched.cprintk("Clock: inserting leap second 23:59:60 GMT\n");
printk519kernel/sched.cprintk("Clock: deleting leap second 23:59:59 GMT\n");
printk741kernel/sched.cprintk("%-8s %3d ", p->comm, (p == current) ? -nr : nr);
printk743kernel/sched.cprintk(stat_nam[p->state]);
printk745kernel/sched.cprintk(" ");
printk747kernel/sched.cprintk(" %08lX ", ((unsigned long *)p->tss.esp)[2]);
printk748kernel/sched.cprintk("%5lu %5d %6d ",
printk751kernel/sched.cprintk("%5d ", p->p_cptr->pid);
printk753kernel/sched.cprintk("      ");
printk755kernel/sched.cprintk("%7d", p->p_ysptr->pid);
printk757kernel/sched.cprintk("       ");
printk759kernel/sched.cprintk(" %5d\n", p->p_osptr->pid);
printk761kernel/sched.cprintk("\n");
printk768kernel/sched.cprintk("                         free                        sibling\n");
printk769kernel/sched.cprintk("  task             PC    stack   pid father child younger older\n");
printk135kernel/sys.cprintk("no vm86_info: BAD\n");
printk70kernel/traps.cprintk("%s: %04lx\n", str, err & 0xffff);
printk71kernel/traps.cprintk("EIP:    %04x:%08lx\nEFLAGS: %08lx\n", 0xffff & regs->cs,regs->eip,regs->eflags);
printk72kernel/traps.cprintk("eax: %08lx   ebx: %08lx   ecx: %08lx   edx: %08lx\n",
printk74kernel/traps.cprintk("esi: %08lx   edi: %08lx   ebp: %08lx\n",
printk76kernel/traps.cprintk("ds: %04x   es: %04x   fs: %04x   gs: %04x\n",
printk79kernel/traps.cprintk("Pid: %d, process nr: %d\n", current->pid, 0xffff & i);
printk81kernel/traps.cprintk("%02x ",0xff & get_seg_byte(regs->cs,(i+(char *)regs->eip)));
printk82kernel/traps.cprintk("\n");
printk120kernel/traps.cprintk("Uhhuh. NMI received. Dazed and confused, but trying to continue\n");
printk121kernel/traps.cprintk("You probably have a hardware problem with your RAM chips\n");
printk287lib/malloc.cprintk("DEB_MALLOC allocating %s block 0x%x (head 0x%x) from %s:%d, magic %x\n",
printk293lib/malloc.cprintk("DEB_MALLOC got %x:%x-byte block, wanted %x, from %s:%d, last %s:%d\n",
printk303lib/malloc.cprintk("DEB_MALLOC used 0x%x:%x(%x) while free, from %s:%d\n",
printk312lib/malloc.cprintk("DEB_MALLOC overran 0x%x:%d while free, from %s:%d\n",retval,hd->size,hd->file,hd->line);
printk327lib/malloc.cprintk("kmalloc called with impossibly large argument (%d)\n", len);
printk345lib/malloc.cprintk("DEB_MALLOC Using free block of 0x%x at %s:%d, by %s:%d, wasOK %s:%d\n",
printk354lib/malloc.cprintk("DEB_MALLOC size for 0x%x given as %d, stored %d, at %s:%d, wasOK %s:%d\n",
printk361lib/malloc.cprintk("DEB_MALLOC overran block 0x%x:%d, at %s:%d, wasOK %s:%d\n",
printk400lib/malloc.cprintk("DEB_MALLOC dup free of 0x%x at %s:%d by %s:%d, wasOK %s:%d\n",
printk407lib/malloc.cprintk("DEB_MALLOC size for 0x%x given as %d, stored %d, at %s:%d, wasOK %s:%d\n",
printk415lib/malloc.cprintk("DEB_MALLOC overran block 0x%x:%d, at %s:%d, from %s:%d, wasOK %s:%d\n",
printk446lib/malloc.cprintk("Bad address passed to kernel kfree_s(%p, %d)\n",obj, size);
printk448lib/malloc.cprintk("Offending code: %s:%d\n",deb_file,deb_line);
printk450lib/malloc.cprintk("Offending eip: %08x\n",((unsigned long *) &obj)[-1]);
printk123mm/kmalloc.cprintk ("Cannot use %d bytes out of %d in order = %d block mallocs\n",
printk158mm/kmalloc.cprintk ("kmalloc: I refuse to allocate %d bytes (for now max = %d).\n",
printk166mm/kmalloc.cprintk ("kmalloc of too large a block (%d bytes).\n",size);
printk199mm/kmalloc.cprintk ("Problem: block on freelist at %08lx isn't free.\n",(long)p);
printk213mm/kmalloc.cprintk ("Couldn't get a free page.....\n");
printk217mm/kmalloc.cprintk ("Got page %08x to use for %d byte mallocs....",(long)page,sz);
printk235mm/kmalloc.cprintk ("%d blocks per page\n",page->nfree);
printk251mm/kmalloc.cprintk ("Hey. This is very funny. I tried %d times to allocate a whole\n"
printk278mm/kmalloc.cprintk ("kfree of non-kmalloced memory: %p, next= %p, order=%d\n",
printk285mm/kmalloc.cprintk ("Trying to free pointer at %p with wrong size: %d instead of %lu.\n",
printk302mm/kmalloc.cprintk ("Page %p already on freelist dazed and confused....\n", page);
printk315mm/kmalloc.cprintk ("Freeing page %08x.\n", (long)page);
printk330mm/kmalloc.cprintk ("Ooops. page %p doesn't show on freelist.\n", page);
printk76mm/memory.cprintk("\nout of memory\n");
printk92mm/memory.cprintk("Bad page table: [%p]=%08lx\n",page_dir,pg_table);
printk132mm/memory.cprintk("Trying to clear kernel page-directory: not good\n");
printk166mm/memory.cprintk("task[0] (swapper) killed: unable to recover\n");
printk171mm/memory.cprintk("Trying to free kernel page-directory: not good\n");
printk230mm/memory.cprintk("copy_page_tables: bad page table: "
printk279mm/memory.cprintk("unmap_page_range called with wrong alignment\n");
printk295mm/memory.cprintk("unmap_page_range: bad page directory.");
printk332mm/memory.cprintk("zeromap_page_range: mask = %08x\n",mask);
printk338mm/memory.cprintk("zeromap_page_range: from = %08lx\n",from);
printk395mm/memory.cprintk("remap_page_range: mask = %08x\n",mask);
printk400mm/memory.cprintk("remap_page_range: from = %08lx, to=%08lx\n",from,to);
printk476mm/memory.cprintk("put_page: prot = %08x\n",prot);
printk478mm/memory.cprintk("put_page: trying to put page %08lx at %08lx\n",page,address);
printk485mm/memory.cprintk("put_page: bad page directory entry\n");
printk492mm/memory.cprintk("put_page: page already exists\n");
printk512mm/memory.cprintk("put_dirty_page: trying to put page %08lx at %08lx\n",page,address);
printk514mm/memory.cprintk("mem_map disagrees with %08lx at %08lx\n",page,address);
printk531mm/memory.cprintk("put_dirty_page: page already exists\n");
printk598mm/memory.cprintk("do_wp_page: bogus page at address %08lx (%08lx)\n",address,old_page);
printk603mm/memory.cprintk("do_wp_page: bogus page-table at address %08lx (%08lx)\n",address,pte);
printk648mm/memory.cprintk("bad page directory entry %08lx\n",page);
printk809mm/memory.cprintk("get_empty_pgtable: bad page-directory entry \n");
printk819mm/memory.cprintk("get_empty_pgtable: bad page-directory entry \n");
printk918mm/memory.cprintk("This processor honours the WP bit even when in supervisor mode. Good.\n");
printk921mm/memory.cprintk("Unable to handle kernel paging WP error");
printk923mm/memory.cprintk("Unable to handle kernel NULL pointer dereference");
printk926mm/memory.cprintk("Unable to handle kernel paging request");
printk927mm/memory.cprintk(" at address %08lx\n",address);
printk986mm/memory.cprintk("Mem-info:\n");
printk987mm/memory.cprintk("Free pages:      %6dkB\n",nr_free_pages<<(PAGE_SHIFT-10));
printk988mm/memory.cprintk("Secondary pages: %6dkB\n",nr_secondary_pages<<(PAGE_SHIFT-10));
printk989mm/memory.cprintk("Free swap:       %6dkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
printk990mm/memory.cprintk("Buffer memory:   %6dkB\n",buffermem>>10);
printk991mm/memory.cprintk("Buffer heads:    %6d\n",nr_buffer_heads);
printk992mm/memory.cprintk("Buffer blocks:   %6d\n",nr_buffers);
printk1003mm/memory.cprintk("%d pages of RAM\n",total);
printk1004mm/memory.cprintk("%d free pages\n",free);
printk1005mm/memory.cprintk("%d reserved pages\n",reserved);
printk1006mm/memory.cprintk("%d pages shared\n",shared);
printk1108mm/memory.cprintk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data)\n",
printk1197mm/memory.cprintk("Free inode %x:%d (%d)\n",area->vm_inode->i_dev, 
printk185mm/mmap.cprintk("unmap_fixup: area=%lx-%lx, unmap %lx-%lx!!\n",
printk373mm/mmap.cprintk("insert_vm_struct: ins area %lx-%lx in area %lx-%lx\n",
printk64mm/swap.cprintk("Internal error: bad swap-device\n");
printk70mm/swap.cprintk("rw_swap_page: weirdness\n");
printk74mm/swap.cprintk("Trying to swap to unused swap-device\n");
printk90mm/swap.cprintk("rw_swap_page: bad swap file\n");
printk95mm/swap.cprintk("re_swap_page: no swap file or device\n");
printk97mm/swap.cprintk("rw_swap_page: lock already cleared\n");
printk136mm/swap.cprintk("Trying to duplicate nonexistent swap-page\n");
printk141mm/swap.cprintk("swap_free: weirdness\n");
printk145mm/swap.cprintk("swap_duplicate: trying to duplicate unused page\n");
printk163mm/swap.cprintk("Trying to free nonexistent swap-page\n");
printk169mm/swap.cprintk("swap_free: weirdness\n");
printk173mm/swap.cprintk("Trying to free swap from unused swap-device\n");
printk183mm/swap.cprintk("swap_free: swap-space map bad (entry %08lx)\n",entry);
printk188mm/swap.cprintk("swap_free: lock already cleared\n");
printk199mm/swap.cprintk("trying to swap in present page\n");
printk203mm/swap.cprintk("No swap page in swap_in\n");
printk359mm/swap.cprintk("swap_out: bad page-table at pg_dir[%d]: %08lx\n",
printk445mm/swap.cprintk("bad page-table at pg_dir[%d]: %08x\n",
printk532mm/swap.cprintk("Trying to free free memory (%08lx): memory probabably corrupted\n",addr);
printk533mm/swap.cprintk("PC = %08lx\n",*(((unsigned long *)&addr)-1));
printk560mm/swap.cprintk("Free page %08lx has mem_map = %d\n", \
printk563mm/swap.cprintk("Result = 0x%08lx - memory map destroyed\n", result); \
printk567mm/swap.cprintk(#nr " is %d, but " #queue " is empty\n",nr); \
printk767mm/swap.cprintk("Unable to start swapping: out of memory :-)\n");
printk773mm/swap.cprintk("Unable to find swap-space signature\n");
printk791mm/swap.cprintk("Empty swap-file\n");
printk811mm/swap.cprintk("Adding Swap: %dk swap-space\n",j<<2);
printk132mm/vmalloc.cprintk("Trying to vfree() bad address (%p)\n", addr);
printk143mm/vmalloc.cprintk("Trying to vfree() nonexistent vm area (%p)\n", addr);
printk25net/ddi.c#   define PRINTK(x)  printk x
printk158net/inet/arp.cprintk("ARP: ");
printk160net/inet/arp.cprintk("(null)\n");
printk168net/inet/arp.cprintk("op ");
printk169net/inet/arp.cprintk(arp_cmds[idx], len);
printk175net/inet/arp.cprintk("   hrd = "); printk(arp_types[idx].name, len);
printk176net/inet/arp.cprintk("   pro = 0x%04X\n", htons(arp->ar_pro));
printk177net/inet/arp.cprintk("   hlen = %d plen = %d\n", arp->ar_hln, arp->ar_pln);
printk186net/inet/arp.cprintk("   sender HA = %s ", arp_types[idx].print(ptr, arp->ar_hln));
printk188net/inet/arp.cprintk("  PA = %s\n", in_ntoa(*(unsigned long *) ptr));
printk190net/inet/arp.cprintk("   target HA = %s ", arp_types[idx].print(ptr, arp->ar_hln));
printk192net/inet/arp.cprintk("  PA = %s\n", in_ntoa(*(unsigned long *) ptr));
printk279net/inet/arp.cprintk("ARP: no memory available for ARP REPLY!\n");
printk290net/inet/arp.cprintk("ARP: cannot create HW frame header for REPLY !\n");
printk343net/inet/arp.cprintk("ARP: ARPing my own IP address %s !\n", in_ntoa(paddr));
printk435net/inet/arp.cprintk("ARP: no memory available for new ARP entry!\n");
printk584net/inet/arp.cprintk("ARP: No memory available for REQUEST %s\n", in_ntoa(paddr));
printk694net/inet/arp.cprintk("ARP: add: will not add entry for 0.0.0.0 !\n");
printk733net/inet/arp.cprintk("ARP: arp_queue skb already on queue magic=%X.\n", skb->magic);
printk823net/inet/arp.cprintk("ARP: SETARP: requested PA is 0.0.0.0 !\n");
printk424net/inet/dev.cprintk("dev.c: dev_queue_xmit: dev = NULL\n");
printk443net/inet/dev.cprintk("bad priority in dev_queue_xmit.\n");
printk514net/inet/dev.cprintk("INET: dev_rint: no longer dropping packets.\n");
printk520net/inet/dev.cprintk("dev_rint: packet dropped on %s (no memory) !\n",
printk905net/inet/dev.cprintk("NET: ioctl(SIOCGIFMEM, 0x%08X)\n", (int)arg);
printk909net/inet/dev.cprintk("NET: ioctl(SIOCSIFMEM, 0x%08X)\n", (int)arg);
printk943net/inet/dev.cprintk("INET: Warning: old-style ioctl(IP_SET_DEV) called!\n");
printk971net/inet/dev.cprintk("%s: adding HOST route of %8.8lx.\n", dev->name,
printk976net/inet/dev.cprintk("%s: adding GATEWAY route of %8.8lx.\n",
printk1013net/inet/dev.cprintk("AF_INET: DDI \"%s\" linked to stream \"%s\"\n",
printk89net/inet/eth.cprintk("eth: SRC = %s ", eth_print(eth->h_source));
printk90net/inet/eth.cprintk("DST = %s ", eth_print(eth->h_dest));
printk91net/inet/eth.cprintk("TYPE = %04X\n", ntohs(eth->h_proto));
printk131net/inet/eth.cprintk("Erk: protocol %X got into an arp request state!\n",type);
printk72net/inet/icmp.cprintk("ICMP: type = %d, code = %d, checksum = %X\n",
printk74net/inet/icmp.cprintk("      gateway = %s\n", in_ntoa(icmph->un.gateway));
printk159net/inet/icmp.cprintk("ICMP: %s:%d: protocol unreachable.\n",
printk167net/inet/icmp.cprintk("ICMP: %s: fragmentation needed and DF set.\n",
printk171net/inet/icmp.cprintk("ICMP: %s: Source Route Failed.\n", in_ntoa(iph->daddr));
printk222net/inet/icmp.cprintk("ICMP: cannot handle TOS redirects yet!\n");
printk260net/inet/icmp.cprintk("ICMP: Could not build IP Header for ICMP ECHO Response\n");
printk324net/inet/icmp.cprintk("ICMP: Could not build IP Header for ICMP ADDRESS Response\n");
printk377net/inet/icmp.cprintk("ICMP: failed checksum from %s!\n", in_ntoa(saddr));
printk82net/inet/ip.cprintk("IP: ihl=%d, version=%d, tos=%d, tot_len=%d\n",
printk84net/inet/ip.cprintk("    id=%X, ttl=%d, prot=%d, check=%X\n",
printk86net/inet/ip.cprintk("    frag_off=%d\n", ip->frag_off);
printk87net/inet/ip.cprintk("    soucre=%s ", in_ntoa(ip->saddr));
printk88net/inet/ip.cprintk("dest=%s\n", in_ntoa(ip->daddr));
printk89net/inet/ip.cprintk("    ----\n");
printk96net/inet/ip.cprintk("    %04X: ", addr);
printk99net/inet/ip.cprintk("%02X ", (*ptr & 0xFF));
printk103net/inet/ip.cprintk("   ");
printk110net/inet/ip.cprintk("  \"%s\"\n", buff);
printk112net/inet/ip.cprintk("    ----\n\n");
printk521net/inet/ip.cprintk("IP: frag_create: no memory left !\n");
printk659net/inet/ip.cprintk("IP: create: no memory left !\n");
printk669net/inet/ip.cprintk("IP: create: no memory left !\n");
printk679net/inet/ip.cprintk("IP: create: no memory left !\n");
printk752net/inet/ip.cprintk("IP: queue_glue: no memory for glueing queue 0x%X\n", (int) qp);
printk782net/inet/ip.cprintk("Invalid fragment list: Fragment over size.\n");
printk1018net/inet/ip.cprintk("IP: frag: no memory for new fragment!\n");
printk1150net/inet/ip.cprintk("\nIP: No memory available for IP forward\n");
printk1225net/inet/ip.cprintk("Machine %x tried to use us as a forwarder to %x but we have forwarding disabled!\n",
printk1247net/inet/ip.cprintk("\nIP: *** datagram fragmentation not yet implemented ***\n");
printk1248net/inet/ip.cprintk("    SRC = %s   ", in_ntoa(iph->saddr));
printk1249net/inet/ip.cprintk("    DST = %s (ignored)\n", in_ntoa(iph->daddr));
printk1346net/inet/ip.cprintk("IP: ip_queue_xmit dev = NULL\n");
printk1385net/inet/ip.cprintk("IP: ***bug sk->send_tail == NULL != sk->send_head\n");
printk1427net/inet/ip.cprintk("ip_retransmit: NULL device bug!\n");
printk1488net/inet/ip.cprintk("Backoff < 0!\n");
printk1500net/inet/ip.cprintk("Overloaded backoff!\n");
printk99net/inet/proc.cprintk("oops, too many %s sockets for netinfo.\n",
printk55net/inet/route.cprintk("RT: %06lx NXT=%06lx FLAGS=0x%02x\n",
printk57net/inet/route.cprintk("    TARGET=%s ", in_ntoa(rt->rt_dst));
printk58net/inet/route.cprintk("GW=%s ", in_ntoa(rt->rt_gateway));
printk59net/inet/route.cprintk("    DEV=%s USE=%ld REF=%d\n",
printk61net/inet/skbuff.cprintk("File: %s Line %d, found a freed skb lurking in the undergrowth!\n",
printk63net/inet/skbuff.cprintk("skb=%p, real size=%ld, claimed size=%ld, magic=%d, list=%p, free=%d\n",
printk68net/inet/skbuff.cprintk("File: %s Line %d, passed a non skb!\n", file,line);
printk69net/inet/skbuff.cprintk("skb=%p, real size=%ld, claimed size=%ld, magic=%d, list=%p, free=%d\n",
printk74net/inet/skbuff.cprintk("File: %s Line %d, Dubious size setting!\n",file,line);
printk75net/inet/skbuff.cprintk("skb=%p, real size=%ld, claimed size=%ld, magic=%d, list=%p\n",
printk91net/inet/skbuff.cprintk("Suspicious queue head: sk_buff on list!\n");
printk119net/inet/skbuff.cprintk("Suspicious queue tail: sk_buff on list!\n");
printk178net/inet/skbuff.cprintk("Dequeued packet has invalid list pointer\n");
printk198net/inet/skbuff.cprintk("insert before unlisted item!\n");
printk200net/inet/skbuff.cprintk("inserted item is already on a list.\n");
printk225net/inet/skbuff.cprintk("append before unlisted item!\n");
printk227net/inet/skbuff.cprintk("append item is already on a list.\n");
printk380net/inet/skbuff.cprintk("kfree_skb: skb = NULL\n");
printk385net/inet/skbuff.cprintk("Warning: kfree_skb passed an skb that nobody set the free flag on!\n");
printk387net/inet/skbuff.cprintk("Warning: kfree_skb passed an skb still on a list.\n");
printk106net/inet/sock.cprintk("  print_sk(NULL)\n");
printk109net/inet/sock.cprintk("  wmem_alloc = %lu\n", sk->wmem_alloc);
printk110net/inet/sock.cprintk("  rmem_alloc = %lu\n", sk->rmem_alloc);
printk111net/inet/sock.cprintk("  send_head = %p\n", sk->send_head);
printk112net/inet/sock.cprintk("  state = %d\n",sk->state);
printk113net/inet/sock.cprintk("  wback = %p, rqueue = %p\n", sk->wback, sk->rqueue);
printk114net/inet/sock.cprintk("  wfront = %p\n", sk->wfront);
printk115net/inet/sock.cprintk("  daddr = %lX, saddr = %lX\n", sk->daddr,sk->saddr);
printk116net/inet/sock.cprintk("  num = %d", sk->num);
printk117net/inet/sock.cprintk(" next = %p\n", sk->next);
printk118net/inet/sock.cprintk("  send_seq = %ld, acked_seq = %ld, copied_seq = %ld\n",
printk120net/inet/sock.cprintk("  rcv_ack_seq = %ld, window_seq = %ld, fin_seq = %ld\n",
printk122net/inet/sock.cprintk("  prot = %p\n", sk->prot);
printk123net/inet/sock.cprintk("  pair = %p, back_log = %p\n", sk->pair,sk->back_log);
printk124net/inet/sock.cprintk("  inuse = %d , blog = %d\n", sk->inuse, sk->blog);
printk125net/inet/sock.cprintk("  dead = %d delay_acks=%d\n", sk->dead, sk->delay_acks);
printk126net/inet/sock.cprintk("  retransmits = %ld, timeout = %d\n", sk->retransmits, sk->timeout);
printk127net/inet/sock.cprintk("  cong_window = %d, packets_out = %d\n", sk->cong_window,
printk129net/inet/sock.cprintk("  urg = %d shutdown=%d\n", sk->urg, sk->shutdown);
printk137net/inet/sock.cprintk("  print_skb(NULL)\n");
printk140net/inet/sock.cprintk("  prev = %p, next = %p\n", skb->prev, skb->next);
printk141net/inet/sock.cprintk("  sk = %p link3 = %p\n", skb->sk, skb->link3);
printk142net/inet/sock.cprintk("  mem_addr = %p, mem_len = %lu\n", skb->mem_addr, skb->mem_len);
printk143net/inet/sock.cprintk("  used = %d free = %d\n", skb->used,skb->free);
printk272net/inet/sock.cprintk("sock.c: remove_sock: sk1 == NULL\n");
printk277net/inet/sock.cprintk("sock.c: remove_sock: sk1->prot == NULL\n");
printk336net/inet/sock.cprintk("sock.c:destroy_sock write queue with bad magic(%X)\n",
printk398net/inet/sock.cprintk("cleaning back_log. \n");
printk452net/inet/sock.cprintk("Warning: sock->data = NULL: %d\n" ,__LINE__);
printk489net/inet/sock.cprintk("Warning: sock->data = NULL: %d\n" ,__LINE__);
printk587net/inet/sock.cprintk("Warning: sock->data = NULL: %d\n" ,__LINE__);
printk680net/inet/sock.cprintk("Warning: sock->data = NULL: %d\n" ,__LINE__);
printk950net/inet/sock.cprintk("Warning: sock->data = NULL: %d\n" ,__LINE__);
printk1031net/inet/sock.cprintk("Warning: sock->data = NULL: %d\n" ,__LINE__);
printk1115net/inet/sock.cprintk("Warning: sock->data = NULL: %d\n" ,__LINE__);
printk1137net/inet/sock.cprintk("Warning sock.c:sk1->err <= 0.  Returning non-error.\n");
printk1200net/inet/sock.cprintk("Warning: sock->data = NULL: %d\n" ,__LINE__);
printk1228net/inet/sock.cprintk("Warning: sock->data = NULL: %d\n" ,__LINE__);
printk1251net/inet/sock.cprintk("Warning: sock->data = NULL: %d\n" ,__LINE__);
printk1273net/inet/sock.cprintk("Warning: sock->data = NULL: %d\n" ,__LINE__);
printk1301net/inet/sock.cprintk("Warning: sock->data = NULL: %d\n" ,__LINE__);
printk1329net/inet/sock.cprintk("Warning: sock->data = NULL: %d\n" ,__LINE__);
printk1360net/inet/sock.cprintk("Warning: sock->data = NULL: %d\n" ,__LINE__);
printk1394net/inet/sock.cprintk("Warning: sock->data = NULL: %d\n" ,__LINE__);
printk1414net/inet/sock.cprintk("Warning: sock->data = NULL: %d\n" ,__LINE__);
printk1435net/inet/sock.cprintk("AF_INET: Warning: sock->data = NULL: %d\n" , __LINE__);
printk1459net/inet/sock.cprintk("AF_INET: ioctl(SIOCATMARK, 0x%08X)\n",(void *) arg);
printk1655net/inet/sock.cprintk("sock.c: release_sock sk == NULL\n");
printk1782net/inet/sock.cprintk("Swansea University Computer Society Net2Debugged [1.27]\n");
printk1785net/inet/sock.cprintk("%s: cannot register major device %d!\n",
printk1801net/inet/sock.cprintk("IP Protocols: ");
printk1807net/inet/sock.cprintk("%s%s",p->name,tmp?", ":"\n");
printk111net/inet/tcp.cprintk("TCP header:\n");
printk113net/inet/tcp.cprintk("    source=%d, dest=%d, seq =%ld, ack_seq = %ld\n",
printk116net/inet/tcp.cprintk("    fin=%d, syn=%d, rst=%d, psh=%d, ack=%d, urg=%d res1=%d res2=%d\n",
printk119net/inet/tcp.cprintk("    window = %d, check = %d urg_ptr = %d\n",
printk121net/inet/tcp.cprintk("    doff = %d\n", th->doff);
printk122net/inet/tcp.cprintk("    options = %d %d %d %d\n", ptr[0], ptr[1], ptr[2], ptr[3]);
printk264net/inet/tcp.cprintk("tcp_readable: %p - ",sk);
printk269net/inet/tcp.cprintk("empty\n");
printk288net/inet/tcp.cprintk("tcp_read: possible read_queue corruption.\n");
printk310net/inet/tcp.cprintk("got %lu bytes.\n",amount);
printk330net/inet/tcp.cprintk("select in");
printk333net/inet/tcp.cprintk("-select out");
printk338net/inet/tcp.cprintk("-select ok data\n");
printk346net/inet/tcp.cprintk("-select ok error");
printk352net/inet/tcp.cprintk("-select ok down\n");
printk357net/inet/tcp.cprintk("-select fail\n");
printk613net/inet/tcp.cif (inet_debug == DBG_SLIP) printk("\rtcp_ack: malloc failed\n");
printk629net/inet/tcp.cif (inet_debug == DBG_SLIP) printk("\rtcp_ack: build_header failed\n");
printk664net/inet/tcp.cprintk("\rtcp_ack: seq %lx ack %lx\n", sequence, ack);
printk795net/inet/tcp.cprintk("TCP: **bug**: \"copy\" <= 0!!\n");
printk1055net/inet/tcp.cprintk("cleaning rbuf for sk=%p\n", sk);
printk1087net/inet/tcp.cprintk("sk->rspace = %lu, was %d\n", sk->prot->rspace(sk),
printk1300net/inet/tcp.cprintk("read: EAGAIN\n");
printk1335net/inet/tcp.cprintk("Read wait sleep\n");
printk1338net/inet/tcp.cprintk("Read wait wakes\n");
printk1935net/inet/tcp.cprintk("Clean rcv queue\n");
printk1943net/inet/tcp.cprintk("Cleaned.\n");
printk2078net/inet/tcp.cprintk("tcp.c skb with bad magic(%X) on write queue. Squashing "
printk2260net/inet/tcp.cprintk("INET: tcp.c: *** bug send_list out of order.\n");
printk2459net/inet/tcp.cprintk("skb1=%p :", skb1);
printk2460net/inet/tcp.cprintk("skb1->h.th->seq = %ld: ", skb1->h.th->seq);
printk2461net/inet/tcp.cprintk("skb->h.th->seq = %ld\n",skb->h.th->seq);
printk2462net/inet/tcp.cprintk("copied_seq = %ld acked_seq = %ld\n", sk->copied_seq,
printk2513net/inet/tcp.cprintk("*** tcp.c:tcp_data bug acked < copied\n");
printk2565net/inet/tcp.cprintk("Ack queued.\n");
printk2584net/inet/tcp.cprintk("INET: tcp.c:tcp_data memory leak detected.\n");
printk2616net/inet/tcp.cprintk("Data wakeup.\n");
printk2957net/inet/tcp.cif (inet_debug == DBG_SLIP) printk("\rtcp_rcv: bad checksum\n");
printk3058net/inet/tcp.cif (inet_debug == DBG_SLIP) printk("\rtcp_rcv: not in seq\n");
printk118net/inet/timer.cprintk ("non dead socket in time_done\n");
printk223net/inet/timer.cprintk ("net timer expired - reason unknown, sk=%08X\n", (int)sk);
printk76net/inet/udp.cprintk("(NULL)\n");
printk79net/inet/udp.cprintk("UDP: source = %d, dest = %d\n", ntohs(uh->source), ntohs(uh->dest));
printk80net/inet/udp.cprintk("     len = %d, check = %d\n", ntohs(uh->len), ntohs(uh->check));
printk276net/inet/udp.cprintk("UDP: send: length %d > mtu %d (ignored)\n", len, dev->mtu);
printk97net/inet/utils.cprintk(buff);
printk93net/socket.cprintk(buff);
printk146net/socket.cprintk("socket.c: uhhuh. stale inode->i_socket pointer\n");
printk150net/socket.cprintk("socket.c: uhhuh. Found socket despite no inode->i_socket pointer\n");
printk193net/socket.cprintk("NET: sock_alloc: no more inodes\n");
printk277net/socket.cprintk("NET: sock_read: can't find socket for inode!\n");
printk292net/socket.cprintk("NET: sock_write: can't find socket for inode!\n");
printk318net/socket.cprintk("NET: sock_ioctl: can't find socket for inode!\n");
printk334net/socket.cprintk("NET: sock_select: can't find socket for inode!\n");
printk356net/socket.cprintk("NET: sock_close: can't find socket for inode!\n");
printk464net/socket.cprintk("sock_socket: no more sockets\n");
printk605net/socket.cprintk("NET: sock_accept: no more sockets\n");
printk1076net/socket.cprintk("NET: cannot register major device %d!\n", SOCKET_MAJOR);
printk72net/unix/proc.cprintk("UNIX: netinfo: oops, too many sockets.\n");
printk110net/unix/sock.cprintk(buff);
printk133net/unix/sock.cprintk("UNIX: Badd addr family %d>\n", sockun->sun_family);
printk135net/unix/sock.cprintk("UNIX: Bad addr len %d>\n", sockaddr_len);
printk139net/unix/sock.cprintk("\"%s\"[%lu]\n", buf, sockaddr_len + UN_PATH_OFFSET);
printk296net/unix/sock.cprintk("UNIX: create: can't allocate buffer\n");
printk300net/unix/sock.cprintk("UNIX: create: can't get page!\n");
printk329net/unix/sock.cprintk("UNIX: release: socket link mismatch!\n");
printk371net/unix/sock.cprintk("UNIX: bind: already bound!\n");
printk393net/unix/sock.cprintk("UNIX: bind: can't open socket %s\n", fname);
printk605net/unix/sock.cprintk("UNIX: read: AVAIL IS NEGATIVE!!!\n");
printk673net/unix/sock.cprintk("UNIX: write: SPACE IS NEGATIVE!!!\n");
printk836net/unix/sock.cprintk("UNIX: cannot link streams!\n");
printk891net/unix/sock.cprintk("%s: cannot register major device %d!\n",