![[first]](../icons/first.png){kind=icon}
![[previous]](../icons/n_left.png){kind=icon}
![[next]](../icons/n_right.png){kind=icon}
![[last]](../icons/last.png){kind=icon}
![[top]](../icons/n_top.png){kind=icon}
![[bottom]](../icons/bottom.png){kind=icon}
![[index]](../icons/index.png){kind=icon}
![[help]](../icons/help.png){kind=icon}
*/
1 /* e2100.c: A Cabletron E2100 series ethernet driver for linux. */
2 /*
3 Written 1993-1994 by Donald Becker.
4
5 Copyright 1994 by Donald Becker.
6 Copyright 1993 United States Government as represented by the
7 Director, National Security Agency. This software may be used and
8 distributed according to the terms of the GNU Public License,
9 incorporated herein by reference.
10
11 This is a driver for the Cabletron E2100 series ethercards.
12
13 The Author may be reached as becker@cesdis.gsfc.nasa.gov, or
14 C/O Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771
15
16 The E2100 series ethercard is a fairly generic shared memory 8390
17 implementation. The only unusual aspect is the way the shared memory
18 registers are set: first you do an inb() in what is normally the
19 station address region, and the low three bits of next outb() *address*
20 is used as the write value for that register. Either someone wasn't
21 too used to dem bit en bites, or they were trying to obfusicate the
22 programming interface.
23
24 There is an additional complication when setting the window on the packet
25 buffer. You must first do a read into the packet buffer region with the
26 low 8 address bits the address setting the page for the start of the packet
27 buffer window, and then do the above operation. See mem_on() for details.
28
29 One bug on the chip is that even a hard reset won't disable the memory
30 window, usually resulting in a hung machine if mem_off() isn't called.
31 If this happens, you must power down the machine for about 30 seconds.
32 */
33
34 static char *version =
35 "e2100.c:v1.01 7/21/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
36
37 #include <linux/config.h>
38 #include <linux/kernel.h>
39 #include <linux/sched.h>
40 #include <linux/errno.h>
41 #include <linux/string.h>
42 #include <asm/io.h>
43 #include <asm/system.h>
44 #include <linux/ioport.h>
45
46 #include <linux/netdevice.h>
47 #include "8390.h"
48
49 static int e21_probe_list[] = {0x300, 0x280, 0x380, 0x220, 0};
50
51 /* Offsets from the base_addr.
52 Read from the ASIC register, and the low three bits of the next outb()
53 address is used to set the cooresponding register. */
54 #define E21_NIC_OFFSET 0 /* Offset to the 8390 NIC. */
55 #define E21_ASIC 0x10
56 #define E21_MEM_ENABLE 0x10
57 #define E21_MEM_ON 0x05 /* Enable memory in 16 bit mode. */
58 #define E21_MEM_ON_8 0x07 /* Enable memory in 8 bit mode. */
59 #define E21_MEM_BASE 0x11
60 #define E21_IRQ_LOW 0x12 /* The low three bits of the IRQ number. */
61 #define E21_IRQ_HIGH 0x14 /* The high IRQ bit and media select ... */
62 #define E21_MEDIA 0x14 /* (alias). */
63 #define E21_ALT_IFPORT 0x02 /* Set to use the other (BNC,AUI) port. */
64 #define E21_BIG_MEM 0x04 /* Use a bigger (64K) buffer (we don't) */
65 #define E21_SAPROM 0x10 /* Offset to station address data. */
66 #define E21_IO_EXTENT 0x20
67
68 extern inline void mem_on(short port, volatile char *mem_base,
/* ![[next]](../icons/right.png)
![[first]](../icons/n_first.png)
![[top]](../icons/top.png)
*/
69 unsigned char start_page )
70 {
71 /* This is a little weird: set the shared memory window by doing a
72 read. The low address bits specify the starting page. */
73 mem_base[start_page];
74 inb(port + E21_MEM_ENABLE);
75 outb(E21_MEM_ON, port + E21_MEM_ENABLE + E21_MEM_ON);
76 }
77
78 extern inline void mem_off(short port)
/* ![[previous]](../icons/left.png)
*/
79 {
80 inb(port + E21_MEM_ENABLE);
81 outb(0x00, port + E21_MEM_ENABLE);
82 }
83
84 /* In other drivers I put the TX pages first, but the E2100 window circuitry
85 is designed to have a 4K Tx region last. The windowing circuitry wraps the
86 window at 0x2fff->0x0000 so that the packets at e.g. 0x2f00 in the RX ring
87 appear contiguously in the window. */
88 #define E21_RX_START_PG 0x00 /* First page of RX buffer */
89 #define E21_RX_STOP_PG 0x30 /* Last page +1 of RX ring */
90 #define E21_BIG_RX_STOP_PG 0xF0 /* Last page +1 of RX ring */
91 #define E21_TX_START_PG E21_RX_STOP_PG /* First page of TX buffer */
92
93 int e2100_probe(struct device *dev);
94 int e21_probe1(struct device *dev, int ioaddr);
95
96 static int e21_open(struct device *dev);
97 static void e21_reset_8390(struct device *dev);
98 static int e21_block_input(struct device *dev, int count,
99 char *buf, int ring_offset);
100 static void e21_block_output(struct device *dev, int count,
101 const unsigned char *buf, const start_page);
102 static int e21_close(struct device *dev);
103
104
105 /* Probe for the E2100 series ethercards. These cards have an 8390 at the
106 base address and the station address at both offset 0x10 and 0x18. I read
107 the station address from offset 0x18 to avoid the dataport of NE2000
108 ethercards, and look for Ctron's unique ID (first three octets of the
109 station address).
110 */
111
112 int e2100_probe(struct device *dev)
/* */
113 {
114 int *port;
115 int base_addr = dev->base_addr;
116
117 if (base_addr > 0x1ff) /* Check a single specified location. */
118 return e21_probe1(dev, base_addr);
119 else if (base_addr != 0) /* Don't probe at all. */
120 return ENXIO;
121
122 for (port = e21_probe_list; *port; port++) {
123 if (check_region(*port, E21_IO_EXTENT))
124 continue;
125 if (e21_probe1(dev, *port) == 0)
126 return 0;
127 }
128
129 return ENODEV;
130 }
131
132 int e21_probe1(struct device *dev, int ioaddr)
/* */
133 {
134 int i, status;
135 unsigned char *station_addr = dev->dev_addr;
136
137 /* First check the station address for the Ctron prefix. */
138 if (inb(ioaddr + E21_SAPROM + 0) != 0x00
139 || inb(ioaddr + E21_SAPROM + 1) != 0x00
140 || inb(ioaddr + E21_SAPROM + 2) != 0x1d)
141 return ENODEV;
142
143 /* Verify by making certain that there is a 8390 at there. */
144 outb(E8390_NODMA + E8390_STOP, ioaddr);
145 SLOW_DOWN_IO;
146 status = inb(ioaddr);
147 if (status != 0x21 && status != 0x23)
148 return ENODEV;
149
150 /* Grab the region so we can find a different board if IRQ select fails. */
151 snarf_region(ioaddr, E21_IO_EXTENT);
152
153 /* Read the station address PROM. */
154 for (i = 0; i < 6; i++)
155 station_addr[i] = inb(ioaddr + E21_SAPROM + i);
156
157 inb(ioaddr + E21_MEDIA); /* Point to media selection. */
158 outb(0, ioaddr + E21_ASIC); /* and disable the secondary interface. */
159
160 printk("%s: E21** at %#3x,", dev->name, ioaddr);
161 for (i = 0; i < 6; i++)
162 printk(" %02X", station_addr[i]);
163
164 if (dev->irq < 2) {
165 int irqlist[] = {15,11,10,12,5,9,3,4}, i;
166 for (i = 0; i < 8; i++)
167 if (request_irq (irqlist[i], NULL) != -EBUSY) {
168 dev->irq = irqlist[i];
169 break;
170 }
171 if (i >= 8) {
172 printk(" unable to get IRQ %d.\n", dev->irq);
173 return EAGAIN;
174 }
175 } else if (dev->irq == 2) /* Fixup luser bogosity: IRQ2 is really IRQ9 */
176 dev->irq = 9;
177
178 /* The 8390 is at the base address. */
179 dev->base_addr = ioaddr;
180
181 ethdev_init(dev);
182
183 ei_status.name = "E2100";
184 ei_status.word16 = 1;
185 ei_status.tx_start_page = E21_TX_START_PG;
186 ei_status.rx_start_page = E21_RX_START_PG;
187 ei_status.stop_page = E21_RX_STOP_PG;
188 ei_status.saved_irq = dev->irq;
189
190 /* Check the media port used. The port can be passed in on the
191 low mem_end bits. */
192 if (dev->mem_end & 15)
193 dev->if_port = dev->mem_end & 7;
194 else {
195 dev->if_port = 0;
196 inb(ioaddr + E21_MEDIA); /* Turn automatic media detection on. */
197 for(i = 0; i < 6; i++)
198 if (station_addr[i] != inb(ioaddr + E21_SAPROM + 8 + i)) {
199 dev->if_port = 1;
200 break;
201 }
202 }
203
204 /* Never map in the E21 shared memory unless you are actively using it.
205 Also, the shared memory has effective only one setting -- spread all
206 over the 128K region! */
207 if (dev->mem_start == 0)
208 dev->mem_start = 0xd0000;
209
210 #ifdef notdef
211 /* These values are unused. The E2100 has a 2K window into the packet
212 buffer. The window can be set to start on any page boundary. */
213 dev->rmem_start = dev->mem_start + TX_PAGES*256;
214 dev->mem_end = dev->rmem_end = dev->mem_start + 2*1024;
215 #endif
216
217 printk(", IRQ %d, %s media, memory @ %#lx.\n", dev->irq,
218 dev->if_port ? "secondary" : "primary", dev->mem_start);
219
220 if (ei_debug > 0)
221 printk(version);
222
223 ei_status.reset_8390 = &e21_reset_8390;
224 ei_status.block_input = &e21_block_input;
225 ei_status.block_output = &e21_block_output;
226 dev->open = &e21_open;
227 dev->stop = &e21_close;
228 NS8390_init(dev, 0);
229
230 return 0;
231 }
232
233 static int
234 e21_open(struct device *dev)
/* */
235 {
236 short ioaddr = dev->base_addr;
237
238 if (irqaction (dev->irq, &ei_sigaction)) {
239 return EBUSY;
240 }
241 irq2dev_map[dev->irq] = dev;
242
243 /* Set the interrupt line and memory base on the hardware. */
244 inb(ioaddr + E21_IRQ_LOW);
245 outb(0, ioaddr + E21_ASIC + (dev->irq & 7));
246 inb(ioaddr + E21_IRQ_HIGH); /* High IRQ bit, and if_port. */
247 outb(0, ioaddr + E21_ASIC + (dev->irq > 7 ? 1:0)
248 + (dev->if_port ? E21_ALT_IFPORT : 0));
249 inb(ioaddr + E21_MEM_BASE);
250 outb(0, ioaddr + E21_ASIC + ((dev->mem_start >> 17) & 7));
251
252 return ei_open(dev);
253 }
254
255 static void
256 e21_reset_8390(struct device *dev)
/* */
257 {
258 short ioaddr = dev->base_addr;
259
260 outb(0x01, ioaddr);
261 if (ei_debug > 1) printk("resetting the E2180x3 t=%ld...", jiffies);
262 ei_status.txing = 0;
263
264 /* Set up the ASIC registers, just in case something changed them. */
265
266 if (ei_debug > 1) printk("reset done\n");
267 return;
268 }
269
270 /* Block input and output are easy on shared memory ethercards.
271 The E21xx makes block_input() especially easy by wrapping the top
272 ring buffer to the bottom automatically. */
273 static int
274 e21_block_input(struct device *dev, int count, char *buf, int ring_offset)
/* */
275 {
276 short ioaddr = dev->base_addr;
277 char *shared_mem = (char *)dev->mem_start;
278 int start_page = (ring_offset>>8);
279
280 mem_on(ioaddr, shared_mem, start_page);
281
282 /* We'll always get a 4 byte header read first. */
283 if (count == 4)
284 ((int*)buf)[0] = ((int*)shared_mem)[0];
285 else
286 memcpy(buf, shared_mem + (ring_offset & 0xff), count);
287
288 /* Turn off memory access: we would need to reprogram the window anyway. */
289 mem_off(ioaddr);
290
291 return 0;
292 }
293
294 static void
295 e21_block_output(struct device *dev, int count, const unsigned char *buf,
/* */
296 int start_page)
297 {
298 short ioaddr = dev->base_addr;
299 volatile char *shared_mem = (char *)dev->mem_start;
300
301 /* Set the shared memory window start by doing a read, with the low address
302 bits specifing the starting page. */
303 *(shared_mem + start_page);
304 mem_on(ioaddr, shared_mem, start_page);
305
306 memcpy((char*)shared_mem, buf, count);
307 mem_off(ioaddr);
308 }
309
310 static int
311 e21_close(struct device *dev)
/* ![[last]](../icons/n_last.png)
*/
312 {
313 short ioaddr = dev->base_addr;
314
315 if (ei_debug > 1)
316 printk("%s: Shutting down ethercard.\n", dev->name);
317
318 free_irq(dev->irq);
319 dev->irq = ei_status.saved_irq;
320
321 /* Shut off the interrupt line and secondary interface. */
322 inb(ioaddr + E21_IRQ_LOW);
323 outb(0, ioaddr + E21_ASIC);
324 inb(ioaddr + E21_IRQ_HIGH); /* High IRQ bit, and if_port. */
325 outb(0, ioaddr + E21_ASIC);
326
327 irq2dev_map[dev->irq] = NULL;
328
329 NS8390_init(dev, 0);
330
331 /* Double-check that the memory has been turned off, because really
332 really bad things happen if it isn't. */
333 mem_off(ioaddr);
334
335 return 0;
336 }
337
338 #ifdef HAVE_DEVLIST
339 struct netdev_entry e21_drv =
340 {"e21", e21_probe1, E21_IO_EXTENT, e21_probe_list};
341 #endif
342
343
344 /*
345 * Local variables:
346 * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c e2100.c"
347 * version-control: t
348 * tab-width: 4
349 * kept-new-versions: 5
350 * End:
351 */
![[bottom]](../icons/n_bottom.png){kind=icon}
*/