tag	line	file	source code
PORT	108	drivers/net/ni65.c	#define writereg(val,reg) {outw(reg,PORT+L_ADDRREG);inw(PORT+L_ADDRREG); \
PORT	109	drivers/net/ni65.c	outw(val,PORT+L_DATAREG);inw(PORT+L_DATAREG);}
PORT	110	drivers/net/ni65.c	#define readreg(reg) (outw(reg,PORT+L_ADDRREG),inw(PORT+L_ADDRREG),\
PORT	111	drivers/net/ni65.c	inw(PORT+L_DATAREG))
PORT	112	drivers/net/ni65.c	#define writedatareg(val) {outw(val,PORT+L_DATAREG);inw(PORT+L_DATAREG);}
PORT	165	drivers/net/ni65.c	outw(0,PORT+L_RESET); /* that's the hard way */
PORT	211	drivers/net/ni65.c	station_addr[i] = dev->dev_addr[i] = inb(PORT+L_EBASE+i);
PORT	220	drivers/net/ni65.c	dev->irq = irqtab[(inw(PORT+L_CONFIG)>>2)&3];
PORT	222	drivers/net/ni65.c	dev->dma = dmatab[inw(PORT+L_CONFIG)&3];
PORT	319	drivers/net/ni65.c	outw(0,PORT+L_RESET); /* first: reset the card */
PORT	320	drivers/net/ni65.c	if(inw(PORT+L_DATAREG) != 0x4)
PORT	322	drivers/net/ni65.c	printk("%s: can't RESET ni6510 card: %04x\n",dev->name,(int) inw(PORT+L_DATAREG));
PORT	378	drivers/net/ni65.c	if(inw(PORT+L_DATAREG) & CSR0_IDON) break; /* init ok ? */
PORT	382	drivers/net/ni65.c	printk("%s: can't init am7990, status: %04x\n",dev->name,(int) inw(PORT+L_DATAREG));
PORT	408	drivers/net/ni65.c	csr0 = inw(PORT+L_DATAREG);
PORT	522	drivers/net/ni65.c	printk("%s: lance-status: %04x\n",dev->name,(int) inw(PORT+L_DATAREG));
PORT	313	drivers/scsi/aha152x.h	#define SETPORT(PORT, VAL)  \
PORT	314	drivers/scsi/aha152x.h	outb( (VAL), (PORT) )
PORT	316	drivers/scsi/aha152x.h	#define SETPORTP(PORT, VAL)  \
PORT	317	drivers/scsi/aha152x.h	outb_p( (VAL), (PORT) )
PORT	319	drivers/scsi/aha152x.h	#define SETPORTW(PORT, VAL)  \
PORT	320	drivers/scsi/aha152x.h	outw( (VAL), (PORT) )
PORT	322	drivers/scsi/aha152x.h	#define GETPORT(PORT)  \
PORT	323	drivers/scsi/aha152x.h	inb( PORT )
PORT	325	drivers/scsi/aha152x.h	#define GETPORTW(PORT)  \
PORT	326	drivers/scsi/aha152x.h	inw( PORT )
PORT	328	drivers/scsi/aha152x.h	#define SETBITS(PORT, BITS)  \
PORT	329	drivers/scsi/aha152x.h	outb( (inb(PORT) | (BITS)), (PORT) )
PORT	331	drivers/scsi/aha152x.h	#define CLRBITS(PORT, BITS)  \
PORT	332	drivers/scsi/aha152x.h	outb( (inb(PORT) & ~(BITS)), (PORT) )
PORT	334	drivers/scsi/aha152x.h	#define CLRSETBITS(PORT, CLR, SET)  \
PORT	335	drivers/scsi/aha152x.h	outb( (inb(PORT) & ~(CLR)) | (SET) , (PORT) )
PORT	337	drivers/scsi/aha152x.h	#define TESTHI(PORT, BITS)  \
PORT	338	drivers/scsi/aha152x.h	((inb(PORT) & (BITS)) == BITS)
PORT	340	drivers/scsi/aha152x.h	#define TESTLO(PORT, BITS)  \
PORT	341	drivers/scsi/aha152x.h	((inb(PORT) & (BITS)) == 0)
PORT	125	drivers/sound/sscape.c	OUTB (reg, PORT (ODIE_ADDR));
PORT	126	drivers/sound/sscape.c	val = INB (PORT (ODIE_DATA));
PORT	137	drivers/sound/sscape.c	OUTB (reg, PORT (ODIE_ADDR));
PORT	138	drivers/sound/sscape.c	OUTB (data, PORT (ODIE_DATA));
PORT	145	drivers/sound/sscape.c	OUTB (0x00, PORT (HOST_CTRL));  /* Put the board to the host mode */
PORT	151	drivers/sound/sscape.c	OUTB (0x03, PORT (HOST_CTRL));  /* Put the board to the MIDI mode */
PORT	169	drivers/sound/sscape.c	if (INB (PORT (HOST_CTRL)) & TX_READY)
PORT	178	drivers/sound/sscape.c	OUTB (data[i], PORT (HOST_DATA));
PORT	201	drivers/sound/sscape.c	if (INB (PORT (HOST_CTRL)) & RX_READY)
PORT	210	drivers/sound/sscape.c	data = INB (PORT (HOST_DATA));
PORT	512	drivers/sound/sscape.c	OUTB (0x00, PORT (HOST_CTRL));
PORT	513	drivers/sound/sscape.c	OUTB (0x00, PORT (MIDI_CTRL));
PORT	529	drivers/sound/sscape.c	if (INB (PORT (HOST_DATA)) == 0xff)  /* OBP startup acknowledge */
PORT	545	drivers/sound/sscape.c	if (INB (PORT (HOST_DATA)) == 0xfe)  /* Host startup acknowledge */
PORT	981	drivers/sound/sscape.c	if ((save = INB (PORT (ODIE_ADDR))) & 0xf0)
PORT	984	drivers/sound/sscape.c	OUTB (0x00, PORT (ODIE_ADDR));
PORT	985	drivers/sound/sscape.c	if (INB (PORT (ODIE_ADDR)) != 0x00)
PORT	988	drivers/sound/sscape.c	OUTB (0xff, PORT (ODIE_ADDR));
PORT	989	drivers/sound/sscape.c	if (INB (PORT (ODIE_ADDR)) != 0x0f)
PORT	992	drivers/sound/sscape.c	OUTB (save, PORT (ODIE_ADDR));