1 #defineDISABLED_OPTIONS 0
2 /* 3 * sound/configure.c - Configuration program for the Linux Sound Driver 4 * 5 * Copyright by Hannu Savolainen 1993 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions are 9 * met: 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 2. 11 * Redistributions in binary form must reproduce the above copyright notice, 12 * this list of conditions and the following disclaimer in the documentation 13 * and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY 16 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 17 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 18 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 19 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 21 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 22 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 */ 28
29 #include <stdio.h>
30
31 #defineB(x) (1 << (x))
32
33 /* 34 * Option numbers 35 */ 36
37 #defineOPT_PAS 0
38 #defineOPT_SB 1
39 #defineOPT_ADLIB 2
40 #defineOPT_LAST_MUTUAL 2
41
42 #defineOPT_GUS 3
43 #defineOPT_MPU401 4
44 #defineOPT_UART6850 5
45 #defineOPT_PSS 6
46 #defineOPT_GUS16 7
47 #defineOPT_GUSMAX 8
48 #defineOPT_MSS 9
49 #defineOPT_SSCAPE 10
50 #defineOPT_TRIX 11
51 #defineOPT_MAD16 12
52
53 #defineOPT_HIGHLEVEL 13 /* This must be same than the next one */ 54 #defineOPT_SBPRO 13
55 #defineOPT_SB16 14
56 #defineOPT_AEDSP16 15
57 #defineOPT_AUDIO 16
58 #define OPT_MIDI_AUTO 17
59 #defineOPT_MIDI 18
60 #defineOPT_YM3812_AUTO 19
61 #defineOPT_YM3812 20
62 #defineOPT_SEQUENCER 21
63 #defineOPT_LAST 21 /* Last defined OPT number */ 64
65 #defineANY_DEVS (B(OPT_AUDIO)|B(OPT_MIDI)|B(OPT_SEQUENCER)|B(OPT_GUS)| \
66 B(OPT_MPU401)|B(OPT_PSS)|B(OPT_GUS16)|B(OPT_GUSMAX)| \
67 B(OPT_MSS)|B(OPT_SSCAPE)|B(OPT_UART6850)|B(OPT_TRIX)| \
68 B(OPT_MAD16))
69 #defineAUDIO_CARDS (B (OPT_PSS) | B (OPT_SB) | B (OPT_PAS) | B (OPT_GUS) | \
70 B (OPT_MSS) | B (OPT_GUS16) | B (OPT_GUSMAX) | B (OPT_TRIX) | \
71 B (OPT_SSCAPE)| B(OPT_MAD16))
72 #defineMIDI_CARDS (B (OPT_PSS) | B (OPT_SB) | B (OPT_PAS) | B (OPT_MPU401) | \
73 B (OPT_GUS) | B (OPT_TRIX) | B (OPT_SSCAPE)|B(OPT_MAD16))
74 /* 75 * Options that have been disabled for some reason (incompletely implemented 76 * and/or tested). Don't remove from this list before looking at file 77 * experimental.txt for further info. 78 */ 79
80 typedefstruct 81 { 82 unsignedlongconditions;
83 unsignedlongexclusive_options;
84 charmacro[20];
85 intverify;
86 intalias;
87 intdefault_answ;
88 } 89
90 hw_entry;
91
92
93 /* 94 * The rule table for the driver options. The first field defines a set of 95 * options which must be selected before this entry can be selected. The 96 * second field is a set of options which are not allowed with this one. If 97 * the fourth field is zero, the option is selected without asking 98 * confirmation from the user. 99 * 100 * With this version of the rule table it is possible to select just one type of 101 * hardware. 102 * 103 * NOTE! Keep the following table and the questions array in sync with the 104 * option numbering! 105 */ 106
107 hw_entryhw_table[] =
108 { 109 /* 110 * 0 111 */ 112 {0, 0, "PAS", 1, 0, 0},
113 {0, 0, "SB", 1, 0, 0},
114 {0, B (OPT_PAS) | B (OPT_SB), "ADLIB", 1, 0, 0},
115
116 {0, 0, "GUS", 1, 0, 0},
117 {0, 0, "MPU401", 1, 0, 0},
118 {0, 0, "UART6850", 1, 0, 0},
119 {0, 0, "PSS", 1, 0, 0},
120 {B (OPT_GUS), 0, "GUS16", 1, 0, 0},
121 {B (OPT_GUS), B (OPT_GUS16), "GUSMAX", 1, 0, 0},
122 {0, 0, "MSS", 1, 0, 0},
123 {0, 0, "SSCAPE", 1, 0, 0},
124 {0, 0, "TRIX", 1, 0, 0},
125 {0, 0, "MAD16", 1, 0, 0},
126
127 {B (OPT_SB), B (OPT_PAS), "SBPRO", 1, 0, 1},
128 {B (OPT_SB) | B (OPT_SBPRO), B (OPT_PAS), "SB16", 1, 0, 1},
129 {B (OPT_SBPRO) | B (OPT_MSS) | B (OPT_MPU401), 0, "AEDSP16", 1, 0, 0},
130 {AUDIO_CARDS, 0, "AUDIO", 1, 0, 1},
131 {B (OPT_MPU401), 0, "MIDI_AUTO", 0, OPT_MIDI, 0},
132 {MIDI_CARDS, 0, "MIDI", 1, 0, 1},
133 {B (OPT_ADLIB), 0, "YM3812_AUTO", 0, OPT_YM3812, 0},
134 {B (OPT_PSS) | B (OPT_SB) | B (OPT_PAS) | B (OPT_ADLIB) | B (OPT_MSS) | B (OPT_PSS), B (OPT_YM3812_AUTO), "YM3812", 1, 0, 1},
135 {B (OPT_MIDI) | B (OPT_YM3812) | B (OPT_YM3812_AUTO) | B (OPT_GUS), 0, "SEQUENCER", 0, 0, 1} 136 };
137
138 char *questions[] =
139 { 140 "ProAudioSpectrum 16 support",
141 "SoundBlaster support",
142 "Generic OPL2/OPL3 FM synthesizer support",
143 "Gravis Ultrasound support",
144 "MPU-401 support (NOT for SB16)",
145 "6850 UART Midi support",
146 "PSS (ECHO-ADI2111) support",
147 "16 bit sampling option of GUS (_NOT_ GUS MAX)",
148 "GUS MAX support",
149 "Microsoft Sound System support",
150 "Ensoniq Soundscape support",
151 "MediaTriX AudioTriX Pro support",
152 "Support for MAD16 and/or Mozart based cards",
153
154 "SoundBlaster Pro support",
155 "SoundBlaster 16 support",
156 "Audio Excel DSP 16 initialization support",
157 "/dev/dsp and /dev/audio supports (usually required)",
158 "This should not be asked",
159 "MIDI interface support",
160 "This should not be asked",
161 "FM synthesizer (YM3812/OPL-3) support",
162 "/dev/sequencer support",
163 "Is the sky really falling"
164 };
165
166 unsignedlongselected_options = 0;
167 intsb_dma = 0;
168
169 #include "hex2hex.h"
170 intbin2hex (char *path, char *target, char *varname);
171
172 int 173 can_select_option (intnr)
/* */ 174 { 175 #if 0
176 switch (nr)
177 { 178 case 0:
179 fprintf (stderr, "The SoundBlaster, AdLib and ProAudioSpectrum\n"
180 "CARDS cannot be installed at the same time.\n\n"
181 "However the PAS16 has a SB emulator so you could select"
182 "the SoundBlaster DRIVER with it.\n");
183 fprintf (stderr, " - ProAudioSpectrum 16\n");
184 fprintf (stderr, " - SoundBlaster / SB Pro\n");
185 fprintf (stderr, " (Could be selected with a PAS16 also)\n");
186 fprintf (stderr, " - AdLib\n");
187 fprintf (stderr, "\nDon't enable SoundBlaster if you have GUS at 0x220!\n\n");
188 break;
189
190 caseOPT_LAST_MUTUAL + 1:
191 fprintf (stderr, "\nThe following cards should work with any other cards.\n"
192 "CAUTION! Don't enable MPU-401 if you don't have it.\n");
193 break;
194
195 caseOPT_HIGHLEVEL:
196 fprintf (stderr, "\nSelect one or more of the following options\n");
197 break;
198
199
200 } 201 #endif 202
203 if (hw_table[nr].conditions)
204 if (!(hw_table[nr].conditions & selected_options))
205 return 0;
206
207 if (hw_table[nr].exclusive_options)
208 if (hw_table[nr].exclusive_options & selected_options)
209 return 0;
210
211 if (DISABLED_OPTIONS & B (nr))
212 return 0;
213
214 return 1;
215 } 216
217 int 218 think_positively (intdef_answ)
/* */ 219 { 220 charansw[512];
221 intlen;
222
223 if ((len = read (0, &answ, sizeof (answ))) < 1)
224 { 225 fprintf (stderr, "\n\nERROR! Cannot read stdin\n");
226
227 perror ("stdin");
228 printf ("#undef CONFIGURE_SOUNDCARD\n");
229 printf ("#undef KERNEL_SOUNDCARD\n");
230 exit (-1);
231 } 232
233 if (len < 2) /* 234 * There is an additional LF at the end 235 */ 236 returndef_answ;
237
238 answ[len - 1] = 0;
239
240 if (!strcmp (answ, "y") || !strcmp (answ, "Y"))
241 return 1;
242
243 return 0;
244 } 245
246 int 247 ask_value (char *format, intdefault_answer)
/* */ 248 { 249 charansw[512];
250 intlen, num;
251
252 play_it_again_Sam:
253
254 if ((len = read (0, &answ, sizeof (answ))) < 1)
255 { 256 fprintf (stderr, "\n\nERROR! Cannot read stdin\n");
257
258 perror ("stdin");
259 printf ("#undef CONFIGURE_SOUNDCARD\n");
260 printf ("#undef KERNEL_SOUNDCARD\n");
261 exit (-1);
262 } 263
264 if (len < 2) /* 265 * There is an additional LF at the end 266 */ 267 returndefault_answer;
268
269 answ[len - 1] = 0;
270
271 if (sscanf (answ, format, &num) != 1)
272 { 273 fprintf (stderr, "Illegal format. Try again: ");
274 gotoplay_it_again_Sam;
275 } 276
277 returnnum;
278 } 279
280 int 281 main (intargc, char *argv[])
/* */ 282 { 283 inti, num, def_size, full_driver = 1;
284 charansw[10];
285
286 printf ("/*\tGenerated by configure. Don't edit!!!!\t*/\n\n");
287
288 fprintf (stderr, "\nConfiguring the sound support\n\n");
289 #if 0
290 /* 291 * The full driver appeared to be impossible to compile and boot. 292 * There are too much supported cards now. 293 */ 294 fprintf (stderr, "Do you want to include full version of the sound driver (n/y) ? ");
295
296 if (think_positively (0))
297 { 298 /* 299 * Select all but some most dangerous cards. These cards are difficult to 300 * detect reliably or conflict with some other cards (SCSI, Mitsumi) 301 */ 302 selected_options = 0xffffffff &
303 ~(B (OPT_MPU401) | B (OPT_UART6850) | B (OPT_PSS)) &
304 ~DISABLED_OPTIONS;
305
306 fprintf (stderr, "Note! MPU-401, PSS and 6850 UART drivers not enabled\n");
307 full_driver = 1;
308 } 309 else 310 #endif 311 { 312 #if 0
313 fprintf (stderr, "Do you want to DISABLE the Sound Driver (n/y) ?");
314 if (think_positively (0))
315 { 316 printf ("#undef CONFIGURE_SOUNDCARD\n");
317 printf ("#undef KERNEL_SOUNDCARD\n");
318 exit (0);
319 } 320 #endif 321 /* 322 * Partial driver 323 */ 324
325 full_driver = 0;
326
327 for (i = 0; i <= OPT_LAST; i++)
328 if (can_select_option (i))
329 { 330 if (!(selected_options & B (i))) /* 331 * Not selected yet 332 */ 333 if (!hw_table[i].verify)
334 { 335 if (hw_table[i].alias)
336 selected_options |= B (hw_table[i].alias);
337 else 338 selected_options |= B (i);
339 } 340 else 341 { 342 intdef_answ = hw_table[i].default_answ;
343
344 fprintf (stderr,
345 def_answ ? " %s (y/n) ? " : " %s (n/y) ? ",
346 questions[i]);
347 if (think_positively (def_answ))
348 if (hw_table[i].alias)
349 selected_options |= B (hw_table[i].alias);
350 else 351 selected_options |= B (i);
352 } 353 } 354 } 355
356 if (selected_options & B (OPT_SBPRO))
357 { 358 fprintf (stderr, "Do you want support for the mixer of SG NX Pro ? ");
359 if (think_positively (0))
360 printf ("#define __SGNXPRO__\n");
361 } 362
363 if (selected_options & B (OPT_SB))
364 { 365 fprintf (stderr, "Do you want support for the MV Jazz16 (ProSonic etc.) ? ");
366 if (think_positively (0))
367 { 368 printf ("#define JAZZ16\n");
369 do 370 { 371 fprintf (stderr, "\tValid 16 bit DMA channels for ProSonic/Jazz 16 are\n");
372 fprintf (stderr, "\t1, 3, 5 (default), 7\n");
373 fprintf (stderr, "\tEnter 16bit DMA channel for Prosonic : ");
374 num = ask_value ("%d", 5);
375 } 376 while (num != 1 && num != 3 && num != 5 && num != 7);
377 fprintf (stderr, "ProSonic 16 bit DMA set to %d\n", num);
378 printf ("#define JAZZ_DMA16 %d\n", num);
379
380 fprintf (stderr, "Do you have SoundMan Wave (n/y) ? ");
381
382 if (think_positively (0))
383 { 384 printf ("#define SM_WAVE\n");
385
386 midi0001_again:
387 fprintf 388 (stderr,
389 "Logitech SoundMan Wave has a microcontroller which must be initialized\n"
390 "before MIDI emulation works. This is possible only if the microcode\n"
391 "file is compiled into the driver.\n"
392 "Do you have access to the MIDI0001.BIN file (y/n) ? ");
393 if (think_positively (1))
394 { 395 charpath[512];
396
397 fprintf (stderr,
398 "Enter full name of the MIDI0001.BIN file (pwd is sound): ");
399 scanf ("%s", path);
400 fprintf (stderr, "including microcode file %s\n", path);
401
402 if (!bin2hex (path, "smw-midi0001.h", "smw_ucode"))
403 { 404 fprintf (stderr, "couldn't open %s file\n",
405 path);
406 fprintf (stderr, "try again with correct path? ");
407 if (think_positively (1))
408 gotomidi0001_again;
409 } 410 else 411 printf ("#define SMW_MIDI0001_INCLUDED\n");
412 } 413 } 414 } 415 } 416
417 if (selected_options & B (OPT_SBPRO))
418 { 419 fprintf (stderr, "\n\nThe Logitech SoundMan Games supports 44 kHz in stereo\n"
420 "while the standard SB Pro supports just 22 kHz/stereo\n"
421 "You have an option to enable the SM Games mode.\n"
422 "However do enable it only if you are _sure_ that your\n"
423 "card is a SM Games. Enabling this feature with a\n"
424 "plain old SB Pro _will_ cause troubles with stereo mode.\n"
425 "\n"
426 "DANGER! Read the above once again before answering 'y'\n"
427 "Answer 'n' in case you are unsure what to do!\n");
428 fprintf (stderr, "Do you have a Logitech SoundMan Games (n/y) ? ");
429 if (think_positively (0))
430 printf ("#define SM_GAMES\n");
431 } 432
433 if (selected_options & B (OPT_SB16))
434 selected_options |= B (OPT_SBPRO);
435
436 if (selected_options & B (OPT_AEDSP16))
437 { 438 intsel1 = 0;
439
440 if (selected_options & B (OPT_SBPRO))
441 { 442 fprintf (stderr, "Do you want support for the Audio Excel SoundBlaster pro mode ? ");
443 if (think_positively (1))
444 { 445 printf ("#define AEDSP16_SBPRO\n");
446 sel1 = 1;
447 } 448 } 449
450 if ((selected_options & B (OPT_MSS)) && (sel1 == 0))
451 { 452 fprintf (stderr, "Do you want support for the Audio Excel Microsoft Sound System mode? ");
453 if (think_positively (1))
454 { 455 printf ("#define AEDSP16_MSS\n");
456 sel1 = 1;
457 } 458 } 459
460 if (sel1 == 0)
461 { 462 printf ("#undef CONFIGURE_SOUNDCARD\n");
463 printf ("#undef KERNEL_SOUNDCARD\n");
464 fprintf (stderr, "ERROR!!!!!\nYou loose: you must select at least one mode when using Audio Excel!\n");
465 exit (-1);
466 } 467 if (selected_options & B (OPT_MPU401))
468 printf ("#define AEDSP16_MPU401\n");
469 } 470
471 if (selected_options & B (OPT_PSS))
472 { 473 genld_again:
474 fprintf 475 (stderr,
476 "if you wish to emulate the soundblaster and you have a DSPxxx.LD.\n"
477 "then you must include the LD in the kernel.\n"
478 "Do you wish to include a LD (y/n) ? ");
479 if (think_positively (1))
480 { 481 charpath[512];
482
483 fprintf (stderr,
484 "Enter the path to your LD file (pwd is sound): ");
485 scanf ("%s", path);
486 fprintf (stderr, "including LD file %s\n", path);
487
488 if (!bin2hex (path, "synth-ld.h", "pss_synth"))
489 { 490 fprintf (stderr, "couldn't open %s as the ld file\n",
491 path);
492 fprintf (stderr, "try again with correct path? ");
493 if (think_positively (1))
494 gotogenld_again;
495 } 496 } 497 else 498 { 499 FILE *sf = fopen ("synth-ld.h", "w");
500
501 fprintf (sf, "/* automaticaly generated by configure */\n");
502 fprintf (sf, "unsigned char pss_synth[1];\n"
503 "#define pss_synthLen 0\n");
504 fclose (sf);
505 } 506 } 507
508 if (selected_options & B (OPT_TRIX))
509 { 510 hex2hex_again:
511 fprintf (stderr, "MediaTriX audioTriX Pro has a onboard microcontroller\n"
512 "which needs to be initialized by downloading\n"
513 "the code from file TRXPRO.HEX in the DOS driver\n"
514 "directory. If you don't have the TRXPRO.HEX handy\n"
515 "you may skip this step. However SB and MPU-401\n"
516 "modes of AudioTriX Pro will not work without\n"
517 "this file!\n"
518 "\n"
519 "Do you want to include TRXPRO.HEX in your kernel (y/n) ? ");
520
521 if (think_positively (1))
522 { 523 charpath[512];
524
525 fprintf (stderr,
526 "Enter the path to your TRXPRO.HEX file (pwd is sound): ");
527 scanf ("%s", path);
528 fprintf (stderr, "including HEX file %s\n", path);
529
530 if (!hex2hex (path, "trix_boot.h", "static unsigned char trix_boot"))
531 gotohex2hex_again;
532 printf ("#define INCLUDE_TRIX_BOOT\n");
533 } 534 } 535
536 if (!(selected_options & ANY_DEVS))
537 { 538 printf ("#undef CONFIGURE_SOUNDCARD\n");
539 printf ("#undef KERNEL_SOUNDCARD\n");
540 fprintf (stderr, "\n*** This combination is useless. Sound driver disabled!!! ***\n\n");
541 exit (0);
542 } 543 else 544 printf ("#define KERNEL_SOUNDCARD\n");
545
546 for (i = 0; i <= OPT_LAST; i++)
547 if (!hw_table[i].alias)
548 if (selected_options & B (i))
549 printf ("#undef EXCLUDE_%s\n", hw_table[i].macro);
550 else 551 printf ("#define EXCLUDE_%s\n", hw_table[i].macro);
552
553
554 /* 555 * IRQ and DMA settings 556 */ 557 printf ("\n");
558
559 #ifdefined(linux)
560 if (selected_options & B (OPT_AEDSP16))
561 { 562 fprintf (stderr, "\nI/O base for Audio Excel DSP 16 ?\n"
563 "Warning:\n"
564 "If you are using Audio Excel SoundBlaster emulation,\n"
565 "you must use the same I/O base for Audio Excel and SoundBlaster.\n"
566 "The factory default is 220 (other possible value is 240)\n"
567 "Enter the Audio Excel DSP 16 I/O base: ");
568
569 num = ask_value ("%x", 0x220);
570 fprintf (stderr, "Audio Excel DSP 16 I/O base set to %03x\n", num);
571 printf ("#define AEDSP16_BASE 0x%03x\n", num);
572 } 573
574 if ((selected_options & B (OPT_SB)) && selected_options & (B (OPT_AUDIO) | B (OPT_MIDI)))
575 { 576 fprintf (stderr, "\nI/O base for SB?\n"
577 "The factory default is 220\n"
578 "Enter the SB I/O base: ");
579
580 num = ask_value ("%x", 0x220);
581 fprintf (stderr, "SB I/O base set to %03x\n", num);
582 printf ("#define SBC_BASE 0x%03x\n", num);
583
584 fprintf (stderr, "\nIRQ number for SoundBlaster?\n"
585 "The IRQ address is defined by the jumpers on your card.\n"
586 "The factory default is either 5 or 7 (depending on the model).\n"
587 "Valid values are 9(=2), 5, 7 and 10.\n"
588 "Enter the value: ");
589
590 num = ask_value ("%d", 7);
591 if (num != 9 && num != 5 && num != 7 && num != 10)
592 { 593
594 fprintf (stderr, "*** Illegal input! ***\n");
595 num = 7;
596 } 597 fprintf (stderr, "SoundBlaster IRQ set to %d\n", num);
598
599 printf ("#define SBC_IRQ %d\n", num);
600
601 if (selected_options & (B (OPT_SBPRO) | B (OPT_PAS)))
602 { 603 fprintf (stderr, "\nDMA channel for SoundBlaster?\n"
604 "For SB 1.0, 1.5 and 2.0 this MUST be 1\n"
605 "SB Pro supports DMA channels 0, 1 and 3 (jumper)\n"
606 "For SB16 give the 8 bit DMA# here\n"
607 "The default value is 1\n"
608 "Enter the value: ");
609
610 num = ask_value ("%d", 1);
611 if (num < 0 || num > 3)
612 { 613
614 fprintf (stderr, "*** Illegal input! ***\n");
615 num = 1;
616 } 617 fprintf (stderr, "SoundBlaster DMA set to %d\n", num);
618 printf ("#define SBC_DMA %d\n", num);
619 sb_dma = num;
620 } 621
622 if (selected_options & B (OPT_SB16))
623 { 624
625 fprintf (stderr, "\n16 bit DMA channel for SoundBlaster 16?\n"
626 "Possible values are 5, 6 or 7\n"
627 "The default value is 6\n"
628 "Enter the value: ");
629
630 num = ask_value ("%d", 6);
631 if ((num < 5 || num > 7) && (num != sb_dma))
632 { 633
634 fprintf (stderr, "*** Illegal input! ***\n");
635 num = 6;
636 } 637 fprintf (stderr, "SoundBlaster DMA set to %d\n", num);
638 printf ("#define SB16_DMA %d\n", num);
639
640 fprintf (stderr, "\nI/O base for SB16 Midi?\n"
641 "Possible values are 300 and 330\n"
642 "The factory default is 330\n"
643 "Enter the SB16 Midi I/O base: ");
644
645 num = ask_value ("%x", 0x330);
646 fprintf (stderr, "SB16 Midi I/O base set to %03x\n", num);
647 printf ("#define SB16MIDI_BASE 0x%03x\n", num);
648 } 649 } 650
651 if (selected_options & B (OPT_PAS))
652 { 653
654 if (selected_options & (B (OPT_AUDIO) | B (OPT_MIDI)))
655 { 656 fprintf (stderr, "\nIRQ number for ProAudioSpectrum?\n"
657 "The recommended value is the IRQ used under DOS.\n"
658 "Please refer to the ProAudioSpectrum User's Guide.\n"
659 "The default value is 10.\n"
660 "Enter the value: ");
661
662 num = ask_value ("%d", 10);
663 if (num == 6 || num < 3 || num > 15 || num == 2) /* 664 * Illegal 665 */ 666 { 667
668 fprintf (stderr, "*** Illegal input! ***\n");
669 num = 10;
670 } 671 fprintf (stderr, "ProAudioSpectrum IRQ set to %d\n", num);
672 printf ("#define PAS_IRQ %d\n", num);
673 } 674
675 if (selected_options & B (OPT_AUDIO))
676 { 677 fprintf (stderr, "\nDMA number for ProAudioSpectrum?\n"
678 "The recommended value is the DMA channel under DOS.\n"
679 "Please refer to the ProAudioSpectrum User's Guide.\n"
680 "The default value is 3\n"
681 "Enter the value: ");
682
683 num = ask_value ("%d", 3);
684 if (num == 4 || num < 0 || num > 7)
685 { 686
687 fprintf (stderr, "*** Illegal input! ***\n");
688 num = 3;
689 } 690 fprintf (stderr, "\nProAudioSpectrum DMA set to %d\n", num);
691 printf ("#define PAS_DMA %d\n", num);
692 } 693 fprintf (stderr, "\nEnable Joystick port on ProAudioSpectrum (n/y) ? ");
694 if (think_positively (0))
695 printf ("#define PAS_JOYSTICK_ENABLE\n");
696
697 fprintf (stderr, "PAS16 could be noisy with some mother boards\n"
698 "There is a command line switch (was it :T?)\n"
699 "in the DOS driver for PAS16 which solves this.\n"
700 "Don't enable this feature unless you have problems!\n"
701 "Do you have to use this switch with DOS (y/n) ?");
702 if (think_positively (0))
703 printf ("#define BROKEN_BUS_CLOCK\n");
704 } 705
706 if (selected_options & B (OPT_GUS))
707 { 708 fprintf (stderr, "\nI/O base for Gravis Ultrasound?\n"
709 "Valid choices are 210, 220, 230, 240, 250 or 260\n"
710 "The factory default is 220\n"
711 "Enter the GUS I/O base: ");
712
713 num = ask_value ("%x", 0x220);
714 if ((num > 0x260) || ((num & 0xf0f) != 0x200) || ((num & 0x0f0) > 0x060))
715 { 716
717 fprintf (stderr, "*** Illegal input! ***\n");
718 num = 0x220;
719 } 720
721 if ((selected_options & B (OPT_SB)) && (num == 0x220))
722 { 723 fprintf (stderr, "FATAL ERROR!!!!!!!!!!!!!!\n"
724 "\t0x220 cannot be used if SoundBlaster is enabled.\n"
725 "\tRun the config again.\n");
726 printf ("#undef CONFIGURE_SOUNDCARD\n");
727 printf ("#undef KERNEL_SOUNDCARD\n");
728 exit (-1);
729 } 730 fprintf (stderr, "GUS I/O base set to %03x\n", num);
731 printf ("#define GUS_BASE 0x%03x\n", num);
732
733 fprintf (stderr, "\nIRQ number for Gravis UltraSound?\n"
734 "The recommended value is the IRQ used under DOS.\n"
735 "Please refer to the Gravis Ultrasound User's Guide.\n"
736 "The default value is 15.\n"
737 "Enter the value: ");
738
739 num = ask_value ("%d", 15);
740 if (num == 6 || num < 3 || num > 15 || num == 2) /* 741 * Invalid 742 */ 743 { 744
745 fprintf (stderr, "*** Illegal input! ***\n");
746 num = 15;
747 } 748 fprintf (stderr, "Gravis UltraSound IRQ set to %d\n", num);
749 printf ("#define GUS_IRQ %d\n", num);
750
751 fprintf (stderr, "\nDMA number for Gravis UltraSound?\n"
752 "The recommended value is the DMA channel under DOS.\n"
753 "Please refer to the Gravis Ultrasound User's Guide.\n"
754 "The default value is 6\n"
755 "Enter the value: ");
756
757 num = ask_value ("%d", 6);
758 if (num == 4 || num < 0 || num > 7)
759 { 760 fprintf (stderr, "*** Illegal input! ***\n");
761 num = 6;
762 } 763 fprintf (stderr, "\nGravis UltraSound DMA set to %d\n", num);
764 printf ("#define GUS_DMA %d\n", num);
765
766 if (selected_options & B (OPT_GUSMAX))
767 { 768 fprintf (stderr, "\nSecond DMA channel for GUS MAX (optional)?\n"
769 "The default value is 7 (0 disables)\n"
770 "Enter the value: ");
771
772 num = ask_value ("%d", 7);
773 if (num > 0)
774 { 775 if (num > 7)
776 { 777 fprintf (stderr, "*** Illegal input! ***\n");
778 num = 7;
779 } 780
781 fprintf (stderr, "\nGUSMAX DMA set to %d\n", num);
782 printf ("#define GUSMAX_DMA %d\n", num);
783 } 784 } 785
786 if (selected_options & B (OPT_GUS16))
787 { 788 fprintf (stderr, "\nI/O base for GUS16 (GUS 16 bit sampling option)?\n"
789 "The factory default is 530\n"
790 "Other possible values are 604, E80 or F40\n"
791 "Enter the GUS16 I/O base: ");
792
793 num = ask_value ("%x", 0x530);
794 fprintf (stderr, "GUS16 I/O base set to %03x\n", num);
795 printf ("#define GUS16_BASE 0x%03x\n", num);
796
797 fprintf (stderr, "\nIRQ number for GUS16?\n"
798 "Valid numbers are: 3, 4, 5, 7, or 9(=2).\n"
799 "The default value is 7.\n"
800 "Enter the value: ");
801
802 num = ask_value ("%d", 7);
803 if (num == 6 || num < 3 || num > 15)
804 { 805 fprintf (stderr, "*** Illegal input! ***\n");
806 num = 7;
807 } 808 fprintf (stderr, "GUS16 IRQ set to %d\n", num);
809 printf ("#define GUS16_IRQ %d\n", num);
810
811 fprintf (stderr, "\nDMA number for GUS16?\n"
812 "The default value is 3\n"
813 "Enter the value: ");
814
815 num = ask_value ("%d", 3);
816 if (num < 0 || num > 3)
817 { 818 fprintf (stderr, "*** Illegal input! ***\n");
819 num = 3;
820 } 821 fprintf (stderr, "\nGUS16 DMA set to %d\n", num);
822 printf ("#define GUS16_DMA %d\n", num);
823 } 824 } 825
826 if (selected_options & B (OPT_MPU401))
827 { 828 fprintf (stderr, "\nI/O base for MPU-401?\n"
829 "The factory default is 330\n"
830 "Enter the MPU-401 I/O base: ");
831
832 num = ask_value ("%x", 0x330);
833 fprintf (stderr, "MPU-401 I/O base set to %03x\n", num);
834 printf ("#define MPU_BASE 0x%03x\n", num);
835
836 fprintf (stderr, "\nIRQ number for MPU-401?\n"
837 "Valid numbers are: 3, 4, 5, 7 and 9(=2).\n"
838 "The default value is 9.\n"
839 "Enter the value: ");
840
841 num = ask_value ("%d", 9);
842 if (num == 6 || num < 3 || num > 15)
843 { 844
845 fprintf (stderr, "*** Illegal input! ***\n");
846 num = 5;
847 } 848 fprintf (stderr, "MPU-401 IRQ set to %d\n", num);
849 printf ("#define MPU_IRQ %d\n", num);
850 } 851
852 if (selected_options & B (OPT_UART6850))
853 { 854 fprintf (stderr, "\nI/O base for 6850 UART Midi?\n"
855 "Be carefull. No defaults.\n"
856 "Enter the 6850 UART I/O base: ");
857
858 num = ask_value ("%x", 0);
859 if (num == 0)
860 { 861 /* 862 * Invalid value entered 863 */ 864 printf ("#define EXCLUDE_UART6850\n");
865 } 866 else 867 { 868 fprintf (stderr, "6850 UART I/O base set to %03x\n", num);
869 printf ("#define U6850_BASE 0x%03x\n", num);
870
871 fprintf (stderr, "\nIRQ number for 6850 UART?\n"
872 "Valid numbers are: 3, 4, 5, 7 and 9(=2).\n"
873 "The default value is 5.\n"
874 "Enter the value: ");
875
876 num = ask_value ("%d", 5);
877 if (num == 6 || num < 3 || num > 15)
878 { 879
880 fprintf (stderr, "*** Illegal input! ***\n");
881 num = 5;
882 } 883 fprintf (stderr, "6850 UART IRQ set to %d\n", num);
884 printf ("#define U6850_IRQ %d\n", num);
885 } 886 } 887
888 if (selected_options & B (OPT_PSS))
889 { 890 fprintf (stderr, "\nI/O base for PSS?\n"
891 "The factory default is 220 (240 also possible)\n"
892 "Enter the PSS I/O base: ");
893
894 num = ask_value ("%x", 0x220);
895 fprintf (stderr, "PSS I/O base set to %03x\n", num);
896 printf ("#define PSS_BASE 0x%03x\n", num);
897
898 fprintf (stderr, "\nIRQ number for PSS?\n"
899 "Valid numbers are: 3, 4, 5, 7, 9(=2) or 10.\n"
900 "The default value is 10.\n"
901 "Enter the value: ");
902
903 num = ask_value ("%d", 10);
904 if (num == 6 || num < 3 || num > 15)
905 { 906 fprintf (stderr, "*** Illegal input! ***\n");
907 num = 7;
908 } 909 fprintf (stderr, "PSS IRQ set to %d\n", num);
910 printf ("#define PSS_IRQ %d\n", num);
911
912 fprintf (stderr, "\nDMA number for ECHO-PSS?\n"
913 "The default value is 5\n"
914 "Valid values are 5, 6 and 7\n"
915 "Enter the value: ");
916
917 num = ask_value ("%d", 5);
918 if (num < 5 || num > 7)
919 { 920 fprintf (stderr, "*** Illegal input! ***\n");
921 num = 5;
922 } 923 fprintf (stderr, "\nECHO-PSS DMA set to %d\n", num);
924 printf ("#define PSS_DMA %d\n", num);
925
926 fprintf (stderr, "\nMSS (MS Sound System) I/O base for the PSS card?\n"
927 "The factory default is 530\n"
928 "Other possible values are 604, E80 or F40\n"
929 "Enter the MSS I/O base: ");
930
931 num = ask_value ("%x", 0x530);
932 fprintf (stderr, "PSS/MSS I/O base set to %03x\n", num);
933 printf ("#define PSS_MSS_BASE 0x%03x\n", num);
934
935 fprintf (stderr, "\nIRQ number for the MSS mode of PSS ?\n"
936 "Valid numbers are: 7, 9(=2), 10 and 11.\n"
937 "The default value is 11.\n"
938 "Enter the value: ");
939
940 num = ask_value ("%d", 11);
941 if (num == 6 || num < 3 || num > 15)
942 { 943 fprintf (stderr, "*** Illegal input! ***\n");
944 num = 11;
945 } 946 fprintf (stderr, "PSS/MSS IRQ set to %d\n", num);
947 printf ("#define PSS_MSS_IRQ %d\n", num);
948
949 fprintf (stderr, "\nMSS DMA number for PSS?\n"
950 "Valid values are 0, 1 and 3.\n"
951 "The default value is 3\n"
952 "Enter the value: ");
953
954 num = ask_value ("%d", 3);
955 if (num == 4 || num < 0 || num > 7)
956 { 957 fprintf (stderr, "*** Illegal input! ***\n");
958 num = 3;
959 } 960 fprintf (stderr, "\nPSS/MSS DMA set to %d\n", num);
961 printf ("#define PSS_MSS_DMA %d\n", num);
962
963 fprintf (stderr, "\nMIDI I/O base for PSS?\n"
964 "The factory default is 330\n"
965 "Enter the PSS MIDI I/O base: ");
966
967 num = ask_value ("%x", 0x330);
968 fprintf (stderr, "PSS/MIDI I/O base set to %03x\n", num);
969 printf ("#define PSS_MPU_BASE 0x%03x\n", num);
970
971 fprintf (stderr, "\nIRQ number for PSS MIDI?\n"
972 "Valid numbers are: 3, 4, 5, 7 and 9(=2).\n"
973 "The default value is 9.\n"
974 "Enter the value: ");
975
976 num = ask_value ("%d", 9);
977 if (num == 6 || num < 3 || num > 15)
978 { 979
980 fprintf (stderr, "*** Illegal input! ***\n");
981 num = 5;
982 } 983 fprintf (stderr, "PSS MIDI IRQ set to %d\n", num);
984 printf ("#define PSS_MPU_IRQ %d\n", num);
985 } 986
987 if (selected_options & B (OPT_MSS))
988 { 989 fprintf (stderr, "\nI/O base for MSS (MS Sound System)?\n"
990 "The factory default is 530\n"
991 "Other possible values are 604, E80 or F40\n"
992 "Enter the MSS I/O base: ");
993
994 num = ask_value ("%x", 0x530);
995 fprintf (stderr, "MSS I/O base set to %03x\n", num);
996 printf ("#define MSS_BASE 0x%03x\n", num);
997
998 fprintf (stderr, "\nIRQ number for MSS?\n"
999 "Valid numbers are: 7, 9(=2), 10 and 11.\n"
1000 "The default value is 10.\n"
1001 "Enter the value: ");
1002
1003 num = ask_value ("%d", 10);
1004 if (num == 6 || num < 3 || num > 15)
1005 {1006 fprintf (stderr, "*** Illegal input! ***\n");
1007 num = 7;
1008 }1009 fprintf (stderr, "MSS IRQ set to %d\n", num);
1010 printf ("#define MSS_IRQ %d\n", num);
1011
1012 fprintf (stderr, "\nDMA number for MSS?\n"
1013 "Valid values are 0, 1 and 3.\n"
1014 "The default value is 3\n"
1015 "Enter the value: ");
1016
1017 num = ask_value ("%d", 3);
1018 if (num == 4 || num < 0 || num > 7)
1019 {1020 fprintf (stderr, "*** Illegal input! ***\n");
1021 num = 3;
1022 }1023 fprintf (stderr, "\nMSS DMA set to %d\n", num);
1024 printf ("#define MSS_DMA %d\n", num);
1025 }1026
1027 if (selected_options & B (OPT_SSCAPE))
1028 {1029 intreveal_spea;
1030
1031 fprintf (stderr, "\n(MIDI) I/O base for Ensoniq Soundscape?\n"
1032 "The factory default is 330\n"
1033 "Other possible values are 320, 340 or 350\n"
1034 "Enter the Soundscape I/O base: ");
1035
1036 num = ask_value ("%x", 0x330);
1037 fprintf (stderr, "Soundscape I/O base set to %03x\n", num);
1038 printf ("#define SSCAPE_BASE 0x%03x\n", num);
1039
1040 fprintf (stderr, "Is your SoundScape card made/marketed by Reveal or Spea? ");
1041 reveal_spea = think_positively (0);
1042 if (reveal_spea)
1043 printf ("#define REVEAL_SPEA\n");
1044
1045 fprintf (stderr, "\nIRQ number for Soundscape?\n");
1046
1047 if (reveal_spea)
1048 fprintf (stderr, "Check valid interrupts from the manual of your card.\n");
1049 else1050 fprintf (stderr, "Valid numbers are: 5, 7, 9(=2) and 10.\n");
1051
1052 fprintf (stderr, "The default value is 9.\n"
1053 "Enter the value: ");
1054
1055 num = ask_value ("%d", 9);
1056 if (num == 6 || num < 3 || num > 15)
1057 {1058 fprintf (stderr, "*** Illegal input! ***\n");
1059 num = 9;
1060 }1061 fprintf (stderr, "Soundscape IRQ set to %d\n", num);
1062 printf ("#define SSCAPE_IRQ %d\n", num);
1063
1064 fprintf (stderr, "\nDMA number for Soundscape?\n"
1065 "Valid values are 1 and 3 (sometimes 0)"
1066 "The default value is 3\n"
1067 "Enter the value: ");
1068
1069 num = ask_value ("%d", 3);
1070 if (num == 4 || num < 0 || num > 7)
1071 {1072 fprintf (stderr, "*** Illegal input! ***\n");
1073 num = 3;
1074 }1075 fprintf (stderr, "\nSoundscape DMA set to %d\n", num);
1076 printf ("#define SSCAPE_DMA %d\n", num);
1077
1078 fprintf (stderr, "\nMSS (MS Sound System) I/O base for the SSCAPE card?\n"
1079 "The factory default is 534\n"
1080 "Other possible values are 608, E84 or F44\n"
1081 "Enter the MSS I/O base: ");
1082
1083 num = ask_value ("%x", 0x534);
1084 fprintf (stderr, "SSCAPE/MSS I/O base set to %03x\n", num);
1085 printf ("#define SSCAPE_MSS_BASE 0x%03x\n", num);
1086
1087 fprintf (stderr, "\nIRQ number for the MSS mode of SSCAPE ?\n");
1088 if (reveal_spea)
1089 fprintf (stderr, "Valid numbers are: 5, 7, 9(=2) and 15.\n");
1090 else1091 fprintf (stderr, "Valid numbers are: 5, 7, 9(=2) and 10.\n");
1092 fprintf (stderr, "The default value is 5.\n"
1093 "Enter the value: ");
1094
1095 num = ask_value ("%d", 5);
1096 if (num == 6 || num < 3 || num > 15)
1097 {1098 fprintf (stderr, "*** Illegal input! ***\n");
1099 num = 10;
1100 }1101 fprintf (stderr, "SSCAPE/MSS IRQ set to %d\n", num);
1102 printf ("#define SSCAPE_MSS_IRQ %d\n", num);
1103
1104 fprintf (stderr, "\nMSS DMA number for SSCAPE?\n"
1105 "Valid values are 0, 1 and 3.\n"
1106 "The default value is 3\n"
1107 "Enter the value: ");
1108
1109 num = ask_value ("%d", 3);
1110 if (num == 4 || num < 0 || num > 7)
1111 {1112 fprintf (stderr, "*** Illegal input! ***\n");
1113 num = 3;
1114 }1115 fprintf (stderr, "\nSSCAPE/MSS DMA set to %d\n", num);
1116 printf ("#define SSCAPE_MSS_DMA %d\n", num);
1117 }1118 if (selected_options & B (OPT_TRIX))
1119 {1120
1121 fprintf (stderr, "\nWindows Sound System I/O base for the AudioTriX card?\n"
1122 "The factory default is 530\n"
1123 "Other possible values are 604, E80 or F40\n"
1124 "Enter the MSS I/O base: ");
1125
1126 num = ask_value ("%x", 0x530);
1127 fprintf (stderr, "AudioTriX MSS I/O base set to %03x\n", num);
1128 printf ("#define TRIX_BASE 0x%03x\n", num);
1129
1130 fprintf (stderr, "\nIRQ number for the WSS mode of AudioTriX ?\n"
1131 "Valid numbers are: 5, 7, 9(=2), 10 and 11.\n"
1132 "The default value is 11.\n"
1133 "Enter the value: ");
1134
1135 num = ask_value ("%d", 11);
1136 if (num != 5 && num != 7 && num != 9 && num != 10 && num != 11)
1137 {1138 fprintf (stderr, "*** Illegal input! ***\n");
1139 num = 11;
1140 }1141 fprintf (stderr, " AudioTriX WSS IRQ set to %d\n", num);
1142 printf ("#define TRIX_IRQ %d\n", num);
1143
1144 fprintf (stderr, "\nWSS DMA number for AudioTriX?\n"
1145 "Valid values are 0, 1 and 3.\n"
1146 "The default value is 3\n"
1147 "Enter the value: ");
1148
1149 num = ask_value ("%d", 3);
1150 if (num != 0 && num != 1 && num != 3)
1151 {1152 fprintf (stderr, "*** Illegal input! ***\n");
1153 num = 3;
1154 }1155 fprintf (stderr, "\nAudioTriX/WSS DMA set to %d\n", num);
1156 printf ("#define TRIX_DMA %d\n", num);
1157
1158 fprintf (stderr, "\nSoundBlaster I/O address for the AudioTriX card?\n"
1159 "The factory default is 220\n"
1160 "Other possible values are 200, 210, 230, 240, 250, 260 and 270\n"
1161 "Enter the MSS I/O base: ");
1162
1163 num = ask_value ("%x", 0x220);
1164 fprintf (stderr, "AudioTriX SB I/O base set to %03x\n", num);
1165 printf ("#define TRIX_SB_BASE 0x%03x\n", num);
1166
1167 fprintf (stderr, "\nIRQ number for the SB mode of AudioTriX ?\n"
1168 "Valid numbers are: 3, 4, 5 and 7.\n"
1169 "The default value is 7.\n"
1170 "Enter the value: ");
1171
1172 num = ask_value ("%d", 7);
1173 if (num != 3 && num != 4 && num != 5 && num != 7)
1174 {1175 fprintf (stderr, "*** Illegal input! ***\n");
1176 num = 7;
1177 }1178 fprintf (stderr, " AudioTriX SB IRQ set to %d\n", num);
1179 printf ("#define TRIX_SB_IRQ %d\n", num);
1180
1181 fprintf (stderr, "\nSB DMA number for AudioTriX?\n"
1182 "Valid values are 1 and 3.\n"
1183 "The default value is 1\n"
1184 "Enter the value: ");
1185
1186 num = ask_value ("%d", 1);
1187 if (num != 1 && num != 3)
1188 {1189 fprintf (stderr, "*** Illegal input! ***\n");
1190 num = 1;
1191 }1192 fprintf (stderr, "\nAudioTriX/SB DMA set to %d\n", num);
1193 printf ("#define TRIX_SB_DMA %d\n", num);
1194
1195 fprintf (stderr, "\nMIDI (MPU-401) I/O address for the AudioTriX card?\n"
1196 "The factory default is 330\n"
1197 "Other possible values are 330, 370, 3B0 and 3F0\n"
1198 "Enter the MPU I/O base: ");
1199
1200 num = ask_value ("%x", 0x330);
1201 fprintf (stderr, "AudioTriX MIDI I/O base set to %03x\n", num);
1202 printf ("#define TRIX_MPU_BASE 0x%03x\n", num);
1203
1204 fprintf (stderr, "\nMIDI IRQ number for the AudioTriX ?\n"
1205 "Valid numbers are: 3, 4, 5, 7 and 9(=2).\n"
1206 "The default value is 5.\n"
1207 "Enter the value: ");
1208
1209 num = ask_value ("%d", 5);
1210 if (num != 3 && num != 4 && num != 5 && num != 7 && num != 9)
1211 {1212 fprintf (stderr, "*** Illegal input! ***\n");
1213 num = 5;
1214 }1215 fprintf (stderr, " AudioTriX MIDI IRQ set to %d\n", num);
1216 printf ("#define TRIX_MPU_IRQ %d\n", num);
1217 }1218
1219 if (selected_options & B (OPT_MAD16))
1220 {1221 fprintf (stderr, "\n*** Options for the MAD16 and Mozart based cards ***\n\n");
1222
1223 fprintf (stderr, "\nWindows Sound System I/O base for the MAD16/Mozart card?\n"
1224 "The factory default is 530\n"
1225 "Other possible values are 604, E80 or F40\n"
1226 "(Check which ones are supported by your card!!!!!!)\n"
1227 "Enter the MSS I/O base: ");
1228
1229 num = ask_value ("%x", 0x530);
1230 fprintf (stderr, "MAD16 MSS I/O base set to %03x\n", num);
1231 printf ("#define MAD16_BASE 0x%03x\n", num);
1232
1233 fprintf (stderr, "\nIRQ number for the WSS mode of MAD16/Mozart ?\n"
1234 "Valid numbers are: 7, 9(=2), 10 and 11.\n"
1235 "The default value is 11.\n"
1236 "Enter the value: ");
1237
1238 num = ask_value ("%d", 11);
1239 if (num != 7 && num != 9 && num != 10 && num != 11)
1240 {1241 fprintf (stderr, "*** Illegal input! ***\n");
1242 num = 11;
1243 }1244 fprintf (stderr, " MAD16 WSS IRQ set to %d\n", num);
1245 printf ("#define MAD16_IRQ %d\n", num);
1246
1247 fprintf (stderr, "\nWSS DMA number for MAD16/Mozart?\n"
1248 "Valid values are 0, 1 and 3.\n"
1249 "The default value is 3\n"
1250 "Enter the value: ");
1251
1252 num = ask_value ("%d", 3);
1253 if (num != 0 && num != 1 && num != 3)
1254 {1255 fprintf (stderr, "*** Illegal input! ***\n");
1256 num = 3;
1257 }1258 fprintf (stderr, "\nMAD16/WSS DMA set to %d\n", num);
1259 printf ("#define MAD16_DMA %d\n", num);
1260
1261 fprintf (stderr, "\nMIDI (MPU-401) I/O address for the MAD16 card?\n"
1262 "(MPU401 is not supported by Mozart and 82C928)\n"
1263 "(This is the second MIDI port in TB Tropez)\n"
1264 "The factory default is 330 (use 0 to disable)\n"
1265 "Other possible values are 330, 320, 310 and 300\n"
1266 "Enter the MPU I/O base: ");
1267
1268 num = ask_value ("%x", 0x330);
1269 if (num == 0)
1270 fprintf (stderr, "MAD16/Mozart MIDI port disabled\n");
1271 else1272 {1273 fprintf (stderr, "MAD16 MIDI I/O base set to %03x\n", num);
1274 printf ("#define MAD16_MPU_BASE 0x%03x\n", num);
1275
1276 fprintf (stderr, "\nMIDI IRQ number for the MAD16 ?\n"
1277 "Valid numbers are: 5, 7, 9(=2) and 10.\n"
1278 "The default value is 5.\n"
1279 "Enter the value: ");
1280
1281 num = ask_value ("%d", 5);
1282 if (num != 3 && num != 4 && num != 5 && num != 7 && num != 9)
1283 {1284 fprintf (stderr, "*** Illegal input! ***\n");
1285 num = 5;
1286 }1287 fprintf (stderr, " MAD16 MIDI IRQ set to %d\n", num);
1288 printf ("#define MAD16_MPU_IRQ %d\n", num);
1289 }1290 }1291 #endif1292
1293 if (selected_options & B (OPT_AUDIO))
1294 {1295 def_size = 65536;
1296
1297 fprintf (stderr, "\nSelect the DMA buffer size (4096, 16384, 32768 or 65536 bytes)\n"
1298 "%d is recommended value for this configuration.\n"
1299 "Enter the value: ", def_size);
1300
1301 num = ask_value ("%d", def_size);
1302 if (num != 4096 && num != 16384 && num != 32768 && num != 65536)
1303 {1304
1305 fprintf (stderr, "*** Illegal input! ***\n");
1306 num = def_size;
1307 }1308 fprintf (stderr, "The DMA buffer size set to %d\n", num);
1309 printf ("#define DSP_BUFFSIZE %d\n", num);
1310 }1311
1312 printf ("#define SELECTED_SOUND_OPTIONS\t0x%08x\n", selected_options);
1313 fprintf (stderr, "The sound driver is now configured.\n");
1314
1315 #ifdefined(SCO) || defined(ISC) || defined(SYSV)
1316 fprintf (stderr, "Remember to update the System file\n");
1317 #endif1318
1319 exit (0);
1320 }1321
1322 int1323 bin2hex (char *path, char *target, char *varname)
/* */1324 {1325 intfd;
1326 intcount;
1327 charc;
1328 inti = 0;
1329
1330 if ((fd = open (path, 0)) > 0)
1331 {1332 FILE *sf = fopen (target, "w");
1333
1334 fprintf (sf, "/* automaticaly generated by configure */\n");
1335 fprintf (sf, "static unsigned char %s[] = {\n", varname);
1336 while (1)
1337 {1338 count = read (fd, &c, 1);
1339 if (count == 0)
1340 break;
1341 if (i != 0 && (i % 10) == 0)
1342 fprintf (sf, "\n");
1343 fprintf (sf, "0x%02x,", c & 0xFFL);
1344 i++;
1345 }1346 fprintf (sf, "};\n"
1347 "#define %sLen %d\n", varname, i);
1348 fclose (sf);
1349 close (fd);
1350 return 1;
1351 }1352
1353 return 0;
1354 }
![[first]](../icons/first.png){kind=icon}
![[previous]](../icons/n_left.png){kind=icon}
![[next]](../icons/n_right.png){kind=icon}
![[last]](../icons/last.png){kind=icon}
![[top]](../icons/n_top.png){kind=icon}
![[bottom]](../icons/bottom.png){kind=icon}
![[index]](../icons/index.png){kind=icon}
![[help]](../icons/help.png){kind=icon}
*/
![[next]](../icons/right.png)
![[first]](../icons/n_first.png)
![[top]](../icons/top.png)
![[previous]](../icons/left.png)
![[last]](../icons/n_last.png)
![[bottom]](../icons/n_bottom.png){kind=icon}