This source file includes following definitions.
- ms_mouse_interrupt
- fasync_mouse
- release_mouse
- open_mouse
- write_mouse
- read_mouse
- mouse_select
- init_module
- cleanup_module
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33 #ifdef MODULE
34 #include <linux/module.h>
35 #include <linux/version.h>
36 #else
37 #define MOD_INC_USE_COUNT
38 #define MOD_DEC_USE_COUNT
39 #endif
40
41 #include <linux/kernel.h>
42 #include <linux/sched.h>
43 #include <linux/busmouse.h>
44 #include <linux/signal.h>
45 #include <linux/errno.h>
46 #include <linux/mouse.h>
47
48 #include <asm/io.h>
49 #include <asm/segment.h>
50 #include <asm/system.h>
51 #include <asm/irq.h>
52
53 static struct mouse_status mouse;
54
55 static void ms_mouse_interrupt(int irq, struct pt_regs * regs)
56 {
57 char dx, dy;
58 unsigned char buttons;
59
60 outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT);
61 outb((inb(MS_MSE_DATA_PORT) | 0x20), MS_MSE_DATA_PORT);
62
63 outb(MS_MSE_READ_X, MS_MSE_CONTROL_PORT);
64 dx = inb(MS_MSE_DATA_PORT);
65
66 outb(MS_MSE_READ_Y, MS_MSE_CONTROL_PORT);
67 dy = inb(MS_MSE_DATA_PORT);
68
69 outb(MS_MSE_READ_BUTTONS, MS_MSE_CONTROL_PORT);
70 buttons = ~(inb(MS_MSE_DATA_PORT)) & 0x07;
71
72 outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT);
73 outb((inb(MS_MSE_DATA_PORT) & 0xdf), MS_MSE_DATA_PORT);
74
75 if (dx != 0 || dy != 0 || buttons != mouse.buttons || ((~buttons) & 0x07)) {
76 mouse.buttons = buttons;
77 mouse.dx += dx;
78 mouse.dy += dy;
79 mouse.ready = 1;
80 wake_up_interruptible(&mouse.wait);
81 if (mouse.fasyncptr)
82 kill_fasync(mouse.fasyncptr, SIGIO);
83 }
84 }
85
86 static int fasync_mouse(struct inode *inode, struct file *filp, int on)
87 {
88 int retval;
89
90 retval = fasync_helper(inode, filp, on, &mouse.fasyncptr);
91 if (retval < 0)
92 return retval;
93 return 0;
94 }
95
96 static void release_mouse(struct inode * inode, struct file * file)
97 {
98 MS_MSE_INT_OFF();
99 mouse.active = mouse.ready = 0;
100 free_irq(MOUSE_IRQ);
101 fasync_mouse(inode, file, 0);
102 }
103
104 static int open_mouse(struct inode * inode, struct file * file)
105 {
106 if (!mouse.present)
107 return -EINVAL;
108 if (mouse.active)
109 return -EBUSY;
110 mouse.active = 1;
111 mouse.ready = mouse.dx = mouse.dy = 0;
112 mouse.buttons = 0x80;
113 if (request_irq(MOUSE_IRQ, ms_mouse_interrupt, 0, "MS Busmouse")) {
114 mouse.active = 0;
115 return -EBUSY;
116 }
117 outb(MS_MSE_START, MS_MSE_CONTROL_PORT);
118 MS_MSE_INT_ON();
119 return 0;
120 }
121
122
123 static int write_mouse(struct inode * inode, struct file * file, const char * buffer, int count)
124 {
125 return -EINVAL;
126 }
127
128 static int read_mouse(struct inode * inode, struct file * file, char * buffer, int count)
129 {
130 int i, dx, dy;
131
132 if (count < 3)
133 return -EINVAL;
134 if (!mouse.ready)
135 return -EAGAIN;
136 put_user(mouse.buttons | 0x80, buffer);
137 dx = mouse.dx < -127 ? -127 : mouse.dx > 127 ? 127 : mouse.dx;
138 dy = mouse.dy < -127 ? 127 : mouse.dy > 127 ? -127 : -mouse.dy;
139 put_user((char)dx, buffer + 1);
140 put_user((char)dy, buffer + 2);
141 for (i = 3; i < count; i++)
142 put_user(0x00, buffer + i);
143 mouse.dx -= dx;
144 mouse.dy += dy;
145 mouse.ready = 0;
146 return i;
147 }
148
149 static int mouse_select(struct inode *inode, struct file *file, int sel_type, select_table * wait)
150 {
151 if (sel_type != SEL_IN)
152 return 0;
153 if (mouse.ready)
154 return 1;
155 select_wait(&mouse.wait,wait);
156 return 0;
157 }
158
159 struct file_operations ms_bus_mouse_fops = {
160 NULL,
161 read_mouse,
162 write_mouse,
163 NULL,
164 mouse_select,
165 NULL,
166 NULL,
167 open_mouse,
168 release_mouse,
169 NULL,
170 fasync_mouse,
171 };
172
173 static struct mouse ms_bus_mouse = {
174 MICROSOFT_BUSMOUSE, "msbusmouse", &ms_bus_mouse_fops
175 };
176
177 #ifdef MODULE
178 char kernel_version[] = UTS_RELEASE;
179
180 int init_module(void)
181 #else
182 unsigned long ms_bus_mouse_init(unsigned long kmem_start)
183 #endif
184 {
185 int mse_byte, i;
186
187 mouse.present = mouse.active = mouse.ready = 0;
188 mouse.buttons = 0x80;
189 mouse.dx = mouse.dy = 0;
190 mouse.wait = NULL;
191 if (inb_p(MS_MSE_SIGNATURE_PORT) == 0xde) {
192
193 mse_byte = inb_p(MS_MSE_SIGNATURE_PORT);
194
195 for (i = 0; i < 4; i++) {
196 if (inb_p(MS_MSE_SIGNATURE_PORT) == 0xde) {
197 if (inb_p(MS_MSE_SIGNATURE_PORT) == mse_byte)
198 mouse.present = 1;
199 else
200 mouse.present = 0;
201 } else
202 mouse.present = 0;
203 }
204 }
205 if (mouse.present == 0) {
206 #ifdef MODULE
207 return -EIO;
208 #else
209 return kmem_start;
210 #endif
211 }
212 MS_MSE_INT_OFF();
213 printk("Microsoft BusMouse detected and installed.\n");
214 mouse_register(&ms_bus_mouse);
215 #ifdef MODULE
216 return 0;
217 #else
218 return kmem_start;
219 #endif
220 }
221
222 #ifdef MODULE
223 void cleanup_module(void)
224 {
225 if (MOD_IN_USE)
226 printk("msbusmouse: in use, remove delayed\n");
227 mouse_deregister(&ms_bus_mouse);
228 }
229 #endif
230