include/linux/tty.h

/* */
   1 #ifndef _LINUX_TTY_H
   2 #define _LINUX_TTY_H
   3 
   4 /*
   5  * 'tty.h' defines some structures used by tty_io.c and some defines.
   6  */
   7 
   8 #ifdef __KERNEL__
   9 #include <linux/fs.h>
  10 #include <linux/termios.h>
  11 #include <linux/tqueue.h>
  12 #include <linux/tty_driver.h>
  13 #include <linux/tty_ldisc.h>
  14 
  15 #include <asm/system.h>
  16 
  17 
  18 /*
  19  * Note: don't mess with NR_PTYS until you understand the tty minor 
  20  * number allocation game...
  21  * (Note: the *_driver.minor_start values 1, 64, 128, 192 are
  22  * hardcoded at present.)
  23  */
  24 #define MIN_NR_CONSOLES 1       /* must be at least 1 */
  25 #define MAX_NR_CONSOLES 63      /* serial lines start at 64 */
  26 #define MAX_NR_USER_CONSOLES 63 /* must be root to allocate above this */
  27                 /* Note: the ioctl VT_GETSTATE does not work for
  28                    consoles 16 and higher (since it returns a short) */
  29 #define NR_PTYS         256
  30 #define NR_LDISCS       16
  31 
  32 /*
  33  * These are set up by the setup-routine at boot-time:
  34  */
  35 
  36 struct screen_info {
  37         unsigned char  orig_x;
  38         unsigned char  orig_y;
  39         unsigned char  unused1[2];
  40         unsigned short orig_video_page;
  41         unsigned char  orig_video_mode;
  42         unsigned char  orig_video_cols;
  43         unsigned short orig_video_ega_ax;
  44         unsigned short orig_video_ega_bx;
  45         unsigned short orig_video_ega_cx;
  46         unsigned char  orig_video_lines;
  47         unsigned char  orig_video_isVGA;
  48         unsigned short orig_video_points;
  49 };
  50 
  51 extern struct screen_info screen_info;
  52 
  53 #define ORIG_X                  (screen_info.orig_x)
  54 #define ORIG_Y                  (screen_info.orig_y)
  55 #define ORIG_VIDEO_PAGE         (screen_info.orig_video_page)
  56 #define ORIG_VIDEO_MODE         (screen_info.orig_video_mode)
  57 #define ORIG_VIDEO_COLS         (screen_info.orig_video_cols)
  58 #define ORIG_VIDEO_EGA_AX       (screen_info.orig_video_ega_ax)
  59 #define ORIG_VIDEO_EGA_BX       (screen_info.orig_video_ega_bx)
  60 #define ORIG_VIDEO_EGA_CX       (screen_info.orig_video_ega_cx)
  61 #define ORIG_VIDEO_LINES        (screen_info.orig_video_lines)
  62 #define ORIG_VIDEO_ISVGA        (screen_info.orig_video_isVGA)
  63 #define ORIG_VIDEO_POINTS       (screen_info.orig_video_points)
  64 
  65 #define VIDEO_TYPE_MDA          0x10    /* Monochrome Text Display      */
  66 #define VIDEO_TYPE_CGA          0x11    /* CGA Display                  */
  67 #define VIDEO_TYPE_EGAM         0x20    /* EGA/VGA in Monochrome Mode   */
  68 #define VIDEO_TYPE_EGAC         0x21    /* EGA in Color Mode            */
  69 #define VIDEO_TYPE_VGAC         0x22    /* VGA+ in Color Mode           */
  70 
  71 #define VIDEO_TYPE_TGAC         0x40    /* DEC TGA */
  72 
  73 /*
  74  * This character is the same as _POSIX_VDISABLE: it cannot be used as
  75  * a c_cc[] character, but indicates that a particular special character
  76  * isn't in use (eg VINTR has no character etc)
  77  */
  78 #define __DISABLED_CHAR '\0'
  79 
  80 /*
  81  * This is the flip buffer used for the tty driver.  The buffer is
  82  * located in the tty structure, and is used as a high speed interface
  83  * between the tty driver and the tty line discipline.
  84  */
  85 #define TTY_FLIPBUF_SIZE 512
  86 
  87 struct tty_flip_buffer {
  88         struct tq_struct tqueue;
  89         unsigned char   char_buf[2*TTY_FLIPBUF_SIZE];
  90         char            flag_buf[2*TTY_FLIPBUF_SIZE];
  91         char            *char_buf_ptr;
  92         unsigned char   *flag_buf_ptr;
  93         int             count;
  94         int             buf_num;
  95 };
  96 
  97 /*
  98  * When a break, frame error, or parity error happens, these codes are
  99  * stuffed into the flags buffer.
 100  */
 101 #define TTY_NORMAL      0
 102 #define TTY_BREAK       1
 103 #define TTY_FRAME       2
 104 #define TTY_PARITY      3
 105 #define TTY_OVERRUN     4
 106 
 107 #define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR])
 108 #define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT])
 109 #define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE])
 110 #define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL])
 111 #define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF])
 112 #define TIME_CHAR(tty) ((tty)->termios->c_cc[VTIME])
 113 #define MIN_CHAR(tty) ((tty)->termios->c_cc[VMIN])
 114 #define SWTC_CHAR(tty) ((tty)->termios->c_cc[VSWTC])
 115 #define START_CHAR(tty) ((tty)->termios->c_cc[VSTART])
 116 #define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP])
 117 #define SUSP_CHAR(tty) ((tty)->termios->c_cc[VSUSP])
 118 #define EOL_CHAR(tty) ((tty)->termios->c_cc[VEOL])
 119 #define REPRINT_CHAR(tty) ((tty)->termios->c_cc[VREPRINT])
 120 #define DISCARD_CHAR(tty) ((tty)->termios->c_cc[VDISCARD])
 121 #define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE])
 122 #define LNEXT_CHAR(tty) ((tty)->termios->c_cc[VLNEXT])
 123 #define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2])
 124 
 125 #define _I_FLAG(tty,f)  ((tty)->termios->c_iflag & (f))
 126 #define _O_FLAG(tty,f)  ((tty)->termios->c_oflag & (f))
 127 #define _C_FLAG(tty,f)  ((tty)->termios->c_cflag & (f))
 128 #define _L_FLAG(tty,f)  ((tty)->termios->c_lflag & (f))
 129 
 130 #define I_IGNBRK(tty)   _I_FLAG((tty),IGNBRK)
 131 #define I_BRKINT(tty)   _I_FLAG((tty),BRKINT)
 132 #define I_IGNPAR(tty)   _I_FLAG((tty),IGNPAR)
 133 #define I_PARMRK(tty)   _I_FLAG((tty),PARMRK)
 134 #define I_INPCK(tty)    _I_FLAG((tty),INPCK)
 135 #define I_ISTRIP(tty)   _I_FLAG((tty),ISTRIP)
 136 #define I_INLCR(tty)    _I_FLAG((tty),INLCR)
 137 #define I_IGNCR(tty)    _I_FLAG((tty),IGNCR)
 138 #define I_ICRNL(tty)    _I_FLAG((tty),ICRNL)
 139 #define I_IUCLC(tty)    _I_FLAG((tty),IUCLC)
 140 #define I_IXON(tty)     _I_FLAG((tty),IXON)
 141 #define I_IXANY(tty)    _I_FLAG((tty),IXANY)
 142 #define I_IXOFF(tty)    _I_FLAG((tty),IXOFF)
 143 #define I_IMAXBEL(tty)  _I_FLAG((tty),IMAXBEL)
 144 
 145 #define O_OPOST(tty)    _O_FLAG((tty),OPOST)
 146 #define O_OLCUC(tty)    _O_FLAG((tty),OLCUC)
 147 #define O_ONLCR(tty)    _O_FLAG((tty),ONLCR)
 148 #define O_OCRNL(tty)    _O_FLAG((tty),OCRNL)
 149 #define O_ONOCR(tty)    _O_FLAG((tty),ONOCR)
 150 #define O_ONLRET(tty)   _O_FLAG((tty),ONLRET)
 151 #define O_OFILL(tty)    _O_FLAG((tty),OFILL)
 152 #define O_OFDEL(tty)    _O_FLAG((tty),OFDEL)
 153 #define O_NLDLY(tty)    _O_FLAG((tty),NLDLY)
 154 #define O_CRDLY(tty)    _O_FLAG((tty),CRDLY)
 155 #define O_TABDLY(tty)   _O_FLAG((tty),TABDLY)
 156 #define O_BSDLY(tty)    _O_FLAG((tty),BSDLY)
 157 #define O_VTDLY(tty)    _O_FLAG((tty),VTDLY)
 158 #define O_FFDLY(tty)    _O_FLAG((tty),FFDLY)
 159 
 160 #define C_BAUD(tty)     _C_FLAG((tty),CBAUD)
 161 #define C_CSIZE(tty)    _C_FLAG((tty),CSIZE)
 162 #define C_CSTOPB(tty)   _C_FLAG((tty),CSTOPB)
 163 #define C_CREAD(tty)    _C_FLAG((tty),CREAD)
 164 #define C_PARENB(tty)   _C_FLAG((tty),PARENB)
 165 #define C_PARODD(tty)   _C_FLAG((tty),PARODD)
 166 #define C_HUPCL(tty)    _C_FLAG((tty),HUPCL)
 167 #define C_CLOCAL(tty)   _C_FLAG((tty),CLOCAL)
 168 #define C_CIBAUD(tty)   _C_FLAG((tty),CIBAUD)
 169 #define C_CRTSCTS(tty)  _C_FLAG((tty),CRTSCTS)
 170 
 171 #define L_ISIG(tty)     _L_FLAG((tty),ISIG)
 172 #define L_ICANON(tty)   _L_FLAG((tty),ICANON)
 173 #define L_XCASE(tty)    _L_FLAG((tty),XCASE)
 174 #define L_ECHO(tty)     _L_FLAG((tty),ECHO)
 175 #define L_ECHOE(tty)    _L_FLAG((tty),ECHOE)
 176 #define L_ECHOK(tty)    _L_FLAG((tty),ECHOK)
 177 #define L_ECHONL(tty)   _L_FLAG((tty),ECHONL)
 178 #define L_NOFLSH(tty)   _L_FLAG((tty),NOFLSH)
 179 #define L_TOSTOP(tty)   _L_FLAG((tty),TOSTOP)
 180 #define L_ECHOCTL(tty)  _L_FLAG((tty),ECHOCTL)
 181 #define L_ECHOPRT(tty)  _L_FLAG((tty),ECHOPRT)
 182 #define L_ECHOKE(tty)   _L_FLAG((tty),ECHOKE)
 183 #define L_FLUSHO(tty)   _L_FLAG((tty),FLUSHO)
 184 #define L_PENDIN(tty)   _L_FLAG((tty),PENDIN)
 185 #define L_IEXTEN(tty)   _L_FLAG((tty),IEXTEN)
 186 
 187 /*
 188  * Where all of the state associated with a tty is kept while the tty
 189  * is open.  Since the termios state should be kept even if the tty
 190  * has been closed --- for things like the baud rate, etc --- it is
 191  * not stored here, but rather a pointer to the real state is stored
 192  * here.  Possible the winsize structure should have the same
 193  * treatment, but (1) the default 80x24 is usually right and (2) it's
 194  * most often used by a windowing system, which will set the correct
 195  * size each time the window is created or resized anyway.
 196  * IMPORTANT: since this structure is dynamically allocated, it must
 197  * be no larger than 4096 bytes.  Changing TTY_BUF_SIZE will change
 198  * the size of this structure, and it needs to be done with care.
 199  *                                              - TYT, 9/14/92
 200  */
 201 struct tty_struct {
 202         int     magic;
 203         struct tty_driver driver;
 204         struct tty_ldisc ldisc;
 205         struct termios *termios, *termios_locked;
 206         int pgrp;
 207         int session;
 208         kdev_t  device;
 209         unsigned long flags;
 210         int count;
 211         struct winsize winsize;
 212         unsigned char stopped:1, hw_stopped:1, packet:1;
 213         unsigned char ctrl_status;
 214 
 215         struct tty_struct *link;
 216         struct fasync_struct *fasync;
 217         struct tty_flip_buffer flip;
 218         int max_flip_cnt;
 219         struct wait_queue *write_wait;
 220         struct wait_queue *read_wait;
 221         void *disc_data;
 222         void *driver_data;
 223 
 224 #define N_TTY_BUF_SIZE 4096
 225         
 226         /*
 227          * The following is data for the N_TTY line discipline.  For
 228          * historical reasons, this is included in the tty structure.
 229          */
 230         unsigned int column;
 231         unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
 232         unsigned char closing:1;
 233         unsigned short minimum_to_wake;
 234         unsigned overrun_time;
 235         int num_overrun;
 236         unsigned long process_char_map[256/(8*sizeof(unsigned long))];
 237         char *read_buf;
 238         int read_head;
 239         int read_tail;
 240         int read_cnt;
 241         unsigned long read_flags[N_TTY_BUF_SIZE/(8*sizeof(unsigned long))];
 242         int canon_data;
 243         unsigned long canon_head;
 244         unsigned int canon_column;
 245 };
 246 
 247 /* tty magic number */
 248 #define TTY_MAGIC               0x5401
 249 
 250 /*
 251  * These bits are used in the flags field of the tty structure.
 252  * 
 253  * So that interrupts won't be able to mess up the queues,
 254  * copy_to_cooked must be atomic with respect to itself, as must
 255  * tty->write.  Thus, you must use the inline functions set_bit() and
 256  * clear_bit() to make things atomic.
 257  */
 258 #define TTY_THROTTLED 0
 259 #define TTY_IO_ERROR 1
 260 #define TTY_SLAVE_CLOSED 2
 261 #define TTY_EXCLUSIVE 3
 262 #define TTY_DEBUG 4
 263 #define TTY_DO_WRITE_WAKEUP 5
 264 #define TTY_PUSH 6
 265 #define TTY_CLOSING 7
 266 
 267 #define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
 268 
 269 extern void tty_write_flush(struct tty_struct *);
 270 
 271 extern struct termios tty_std_termios;
 272 extern struct tty_struct * redirect;
 273 extern struct tty_ldisc ldiscs[];
 274 extern int fg_console;
 275 extern struct wait_queue * keypress_wait;
 276 
 277 extern unsigned long con_init(unsigned long);
 278 
 279 extern int rs_init(void);
 280 extern int lp_init(void);
 281 extern int pty_init(void);
 282 extern int tty_init(void);
 283 extern int vcs_init(void);
 284 extern int cy_init(void);
 285 extern int stl_init(void);
 286 extern int stli_init(void);
 287 
 288 extern int tty_paranoia_check(struct tty_struct *tty, kdev_t device,
 289                               const char *routine);
 290 extern char *_tty_name(struct tty_struct *tty, char *buf);
 291 extern char *tty_name(struct tty_struct *tty);
 292 extern void tty_wait_until_sent(struct tty_struct * tty, int timeout);
 293 extern int tty_check_change(struct tty_struct * tty);
 294 extern void stop_tty(struct tty_struct * tty);
 295 extern void start_tty(struct tty_struct * tty);
 296 extern int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc);
 297 extern int tty_register_driver(struct tty_driver *driver);
 298 extern int tty_unregister_driver(struct tty_driver *driver);
 299 extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
 300                              int buflen);
 301 
 302 extern int is_orphaned_pgrp(int pgrp);
 303 extern int is_ignored(int sig);
 304 extern int tty_signal(int sig, struct tty_struct *tty);
 305 extern void tty_hangup(struct tty_struct * tty);
 306 extern void tty_vhangup(struct tty_struct * tty);
 307 extern void tty_unhangup(struct file *filp);
 308 extern int tty_hung_up_p(struct file * filp);
 309 extern void do_SAK(struct tty_struct *tty);
 310 extern void disassociate_ctty(int priv);
 311 
 312 /* n_tty.c */
 313 extern struct tty_ldisc tty_ldisc_N_TTY;
 314 
 315 /* tty_ioctl.c */
 316 extern int n_tty_ioctl(struct tty_struct * tty, struct file * file,
 317                        unsigned int cmd, unsigned long arg);
 318 
 319 /* serial.c */
 320 
 321 extern int  rs_open(struct tty_struct * tty, struct file * filp);
 322 
 323 /* pty.c */
 324 
 325 extern int  pty_open(struct tty_struct * tty, struct file * filp);
 326 
 327 /* console.c */
 328 
 329 extern int con_open(struct tty_struct * tty, struct file * filp);
 330 extern void update_screen(int new_console);
 331 
 332 /* vt.c */
 333 
 334 extern int vt_ioctl(struct tty_struct *tty, struct file * file,
 335                     unsigned int cmd, unsigned long arg);
 336 
 337 #endif /* __KERNEL__ */
 338 #endif
/* */
root/include/linux/tty.h

INCLUDED FROM
