![[first]](../icons/first.png){kind=icon}
![[previous]](../icons/n_left.png){kind=icon}
![[next]](../icons/n_right.png){kind=icon}
![[last]](../icons/last.png){kind=icon}
![[top]](../icons/n_top.png){kind=icon}
![[bottom]](../icons/bottom.png){kind=icon}
![[index]](../icons/index.png){kind=icon}
![[help]](../icons/help.png){kind=icon}
*/
1 static const char *version =
2 "de600.c: $Revision: 1.40 $, Bjorn Ekwall (bj0rn@blox.se)\n";
3 /*
4 * de600.c
5 *
6 * Linux driver for the D-Link DE-600 Ethernet pocket adapter.
7 *
8 * Portions (C) Copyright 1993, 1994 by Bjorn Ekwall
9 * The Author may be reached as bj0rn@blox.se
10 *
11 * Based on adapter information gathered from DE600.ASM by D-Link Inc.,
12 * as included on disk C in the v.2.11 of PC/TCP from FTP Software.
13 * For DE600.asm:
14 * Portions (C) Copyright 1990 D-Link, Inc.
15 * Copyright, 1988-1992, Russell Nelson, Crynwr Software
16 *
17 * Adapted to the sample network driver core for linux,
18 * written by: Donald Becker <becker@super.org>
19 * C/O Supercomputing Research Ctr., 17100 Science Dr., Bowie MD 20715
20 *
21 * compile-command:
22 * "gcc -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer \
23 * -m486 -c de600.c
24 *
25 **************************************************************/
26 /*
27 * This program is free software; you can redistribute it and/or modify
28 * it under the terms of the GNU General Public License as published by
29 * the Free Software Foundation; either version 2, or (at your option)
30 * any later version.
31 *
32 * This program is distributed in the hope that it will be useful,
33 * but WITHOUT ANY WARRANTY; without even the implied warranty of
34 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
35 * GNU General Public License for more details.
36 *
37 * You should have received a copy of the GNU General Public License
38 * along with this program; if not, write to the Free Software
39 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
40 *
41 **************************************************************/
42 /* Add another "; SLOW_DOWN_IO" here if your adapter won't work OK: */
43 #define DE600_SLOW_DOWN SLOW_DOWN_IO; SLOW_DOWN_IO; SLOW_DOWN_IO
44
45 /*
46 * If you still have trouble reading/writing to the adapter,
47 * modify the following "#define": (see <asm/io.h> for more info)
48 #define REALLY_SLOW_IO
49 */
50 #define SLOW_IO_BY_JUMPING /* Looks "better" than dummy write to port 0x80 :-) */
51
52 /*
53 * If you want to enable automatic continuous checking for the DE600,
54 * keep this #define enabled.
55 * It doesn't cost much per packet, so I think it is worth it!
56 * If you disagree, comment away the #define, and live with it...
57 *
58 */
59 #define CHECK_LOST_DE600
60
61 /*
62 * Enable this #define if you want the adapter to do a "ifconfig down" on
63 * itself when we have detected that something is possibly wrong with it.
64 * The default behaviour is to retry with "adapter_init()" until success.
65 * This should be used for debugging purposes only.
66 * (Depends on the CHECK_LOST_DE600 above)
67 *
68 */
69 #define SHUTDOWN_WHEN_LOST
70
71 /*
72 * See comment at "de600_rspace()"!
73 * This is an *ugly* hack, but for now it achieves its goal of
74 * faking a TCP flow-control that will not flood the poor DE600.
75 *
76 * Tricks TCP to announce a small max window (max 2 fast packets please :-)
77 *
78 * Comment away at your own risk!
79 *
80 * Update: Use the more general per-device maxwindow parameter instead.
81 */
82 #undef FAKE_SMALL_MAX
83
84 /* use 0 for production, 1 for verification, >2 for debug */
85 #ifdef DE600_DEBUG
86 #define PRINTK(x) if (de600_debug >= 2) printk x
87 #else
88 #define DE600_DEBUG 0
89 #define PRINTK(x) /**/
90 #endif
91 unsigned int de600_debug = DE600_DEBUG;
92
93 #include <linux/module.h>
94
95 #include <linux/kernel.h>
96 #include <linux/sched.h>
97 #include <linux/types.h>
98 #include <linux/fcntl.h>
99 #include <linux/string.h>
100 #include <linux/interrupt.h>
101 #include <linux/ioport.h>
102 #include <asm/io.h>
103 #include <linux/in.h>
104 #include <linux/ptrace.h>
105 #include <asm/system.h>
106 #include <linux/errno.h>
107
108 #include <linux/inet.h>
109 #include <linux/netdevice.h>
110 #include <linux/etherdevice.h>
111 #include <linux/skbuff.h>
112
113 #ifdef FAKE_SMALL_MAX
114 static unsigned long de600_rspace(struct sock *sk);
115 #include <net/sock.h>
116 #endif
117
118 #define netstats enet_statistics
119 typedef unsigned char byte;
120
121 /**************************************************
122 * *
123 * Definition of D-Link Ethernet Pocket adapter *
124 * *
125 **************************************************/
126 /*
127 * D-Link Ethernet pocket adapter ports
128 */
129 /*
130 * OK, so I'm cheating, but there are an awful lot of
131 * reads and writes in order to get anything in and out
132 * of the DE-600 with 4 bits at a time in the parallel port,
133 * so every saved instruction really helps :-)
134 *
135 * That is, I don't care what the device struct says
136 * but hope that Space.c will keep the rest of the drivers happy.
137 */
138 #ifndef DE600_IO
139 #define DE600_IO 0x378
140 #endif
141
142 #define DATA_PORT (DE600_IO)
143 #define STATUS_PORT (DE600_IO + 1)
144 #define COMMAND_PORT (DE600_IO + 2)
145
146 #ifndef DE600_IRQ
147 #define DE600_IRQ 7
148 #endif
149 /*
150 * It really should look like this, and autoprobing as well...
151 *
152 #define DATA_PORT (dev->base_addr + 0)
153 #define STATUS_PORT (dev->base_addr + 1)
154 #define COMMAND_PORT (dev->base_addr + 2)
155 #define DE600_IRQ dev->irq
156 */
157
158 /*
159 * D-Link COMMAND_PORT commands
160 */
161 #define SELECT_NIC 0x04 /* select Network Interface Card */
162 #define SELECT_PRN 0x1c /* select Printer */
163 #define NML_PRN 0xec /* normal Printer situation */
164 #define IRQEN 0x10 /* enable IRQ line */
165
166 /*
167 * D-Link STATUS_PORT
168 */
169 #define RX_BUSY 0x80
170 #define RX_GOOD 0x40
171 #define TX_FAILED16 0x10
172 #define TX_BUSY 0x08
173
174 /*
175 * D-Link DATA_PORT commands
176 * command in low 4 bits
177 * data in high 4 bits
178 * select current data nibble with HI_NIBBLE bit
179 */
180 #define WRITE_DATA 0x00 /* write memory */
181 #define READ_DATA 0x01 /* read memory */
182 #define STATUS 0x02 /* read status register */
183 #define COMMAND 0x03 /* write command register (see COMMAND below) */
184 #define NULL_COMMAND 0x04 /* null command */
185 #define RX_LEN 0x05 /* read received packet length */
186 #define TX_ADDR 0x06 /* set adapter transmit memory address */
187 #define RW_ADDR 0x07 /* set adapter read/write memory address */
188 #define HI_NIBBLE 0x08 /* read/write the high nibble of data,
189 or-ed with rest of command */
190
191 /*
192 * command register, accessed through DATA_PORT with low bits = COMMAND
193 */
194 #define RX_ALL 0x01 /* PROMISCUOUS */
195 #define RX_BP 0x02 /* default: BROADCAST & PHYSICAL ADDRESS */
196 #define RX_MBP 0x03 /* MULTICAST, BROADCAST & PHYSICAL ADDRESS */
197
198 #define TX_ENABLE 0x04 /* bit 2 */
199 #define RX_ENABLE 0x08 /* bit 3 */
200
201 #define RESET 0x80 /* set bit 7 high */
202 #define STOP_RESET 0x00 /* set bit 7 low */
203
204 /*
205 * data to command register
206 * (high 4 bits in write to DATA_PORT)
207 */
208 #define RX_PAGE2_SELECT 0x10 /* bit 4, only 2 pages to select */
209 #define RX_BASE_PAGE 0x20 /* bit 5, always set when specifying RX_ADDR */
210 #define FLIP_IRQ 0x40 /* bit 6 */
211
212 /*
213 * D-Link adapter internal memory:
214 *
215 * 0-2K 1:st transmit page (send from pointer up to 2K)
216 * 2-4K 2:nd transmit page (send from pointer up to 4K)
217 *
218 * 4-6K 1:st receive page (data from 4K upwards)
219 * 6-8K 2:nd receive page (data from 6K upwards)
220 *
221 * 8K+ Adapter ROM (contains magic code and last 3 bytes of Ethernet address)
222 */
223 #define MEM_2K 0x0800 /* 2048 */
224 #define MEM_4K 0x1000 /* 4096 */
225 #define MEM_6K 0x1800 /* 6144 */
226 #define NODE_ADDRESS 0x2000 /* 8192 */
227
228 #define RUNT 60 /* Too small Ethernet packet */
229
230 /**************************************************
231 * *
232 * End of definition *
233 * *
234 **************************************************/
235
236 /*
237 * Index to functions, as function prototypes.
238 */
239 /* Routines used internally. (See "convenience macros") */
240 static byte de600_read_status(struct device *dev);
241 static byte de600_read_byte(unsigned char type, struct device *dev);
242
243 /* Put in the device structure. */
244 static int de600_open(struct device *dev);
245 static int de600_close(struct device *dev);
246 static struct netstats *get_stats(struct device *dev);
247 static int de600_start_xmit(struct sk_buff *skb, struct device *dev);
248
249 /* Dispatch from interrupts. */
250 static void de600_interrupt(int irq, struct pt_regs *regs);
251 static int de600_tx_intr(struct device *dev, int irq_status);
252 static void de600_rx_intr(struct device *dev);
253
254 /* Initialization */
255 static void trigger_interrupt(struct device *dev);
256 int de600_probe(struct device *dev);
257 static int adapter_init(struct device *dev);
258
259 /*
260 * D-Link driver variables:
261 */
262 static volatile int rx_page = 0;
263
264 #define TX_PAGES 2
265 static volatile int tx_fifo[TX_PAGES];
266 static volatile int tx_fifo_in = 0;
267 static volatile int tx_fifo_out = 0;
268 static volatile int free_tx_pages = TX_PAGES;
269 static int was_down = 0;
270
271 /*
272 * Convenience macros/functions for D-Link adapter
273 */
274
275 #define select_prn() outb_p(SELECT_PRN, COMMAND_PORT); DE600_SLOW_DOWN
276 #define select_nic() outb_p(SELECT_NIC, COMMAND_PORT); DE600_SLOW_DOWN
277
278 /* Thanks for hints from Mark Burton <markb@ordern.demon.co.uk> */
279 #define de600_put_byte(data) ( \
280 outb_p(((data) << 4) | WRITE_DATA , DATA_PORT), \
281 outb_p(((data) & 0xf0) | WRITE_DATA | HI_NIBBLE, DATA_PORT))
282
283 /*
284 * The first two outb_p()'s below could perhaps be deleted if there
285 * would be more delay in the last two. Not certain about it yet...
286 */
287 #define de600_put_command(cmd) ( \
288 outb_p(( rx_page << 4) | COMMAND , DATA_PORT), \
289 outb_p(( rx_page & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT), \
290 outb_p(((rx_page | cmd) << 4) | COMMAND , DATA_PORT), \
291 outb_p(((rx_page | cmd) & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT))
292
293 #define de600_setup_address(addr,type) ( \
294 outb_p((((addr) << 4) & 0xf0) | type , DATA_PORT), \
295 outb_p(( (addr) & 0xf0) | type | HI_NIBBLE, DATA_PORT), \
296 outb_p((((addr) >> 4) & 0xf0) | type , DATA_PORT), \
297 outb_p((((addr) >> 8) & 0xf0) | type | HI_NIBBLE, DATA_PORT))
298
299 #define rx_page_adr() ((rx_page & RX_PAGE2_SELECT)?(MEM_6K):(MEM_4K))
300
301 /* Flip bit, only 2 pages */
302 #define next_rx_page() (rx_page ^= RX_PAGE2_SELECT)
303
304 #define tx_page_adr(a) (((a) + 1) * MEM_2K)
305
306 static inline byte
307 de600_read_status(struct device *dev)
/* ![[next]](../icons/right.png)
![[first]](../icons/n_first.png)
![[top]](../icons/top.png)
*/
308 {
309 byte status;
310
311 outb_p(STATUS, DATA_PORT);
312 status = inb(STATUS_PORT);
313 outb_p(NULL_COMMAND | HI_NIBBLE, DATA_PORT);
314
315 return status;
316 }
317
318 static inline byte
319 de600_read_byte(unsigned char type, struct device *dev) { /* dev used by macros */
/* ![[previous]](../icons/left.png)
*/
320 byte lo;
321
322 (void)outb_p((type), DATA_PORT);
323 lo = ((unsigned char)inb(STATUS_PORT)) >> 4;
324 (void)outb_p((type) | HI_NIBBLE, DATA_PORT);
325 return ((unsigned char)inb(STATUS_PORT) & (unsigned char)0xf0) | lo;
326 }
327
328 /*
329 * Open/initialize the board. This is called (in the current kernel)
330 * after booting when 'ifconfig <dev->name> $IP_ADDR' is run (in rc.inet1).
331 *
332 * This routine should set everything up anew at each open, even
333 * registers that "should" only need to be set once at boot, so that
334 * there is a non-reboot way to recover if something goes wrong.
335 */
336 static int
337 de600_open(struct device *dev)
/* */
338 {
339 if (request_irq(DE600_IRQ, de600_interrupt, 0, "de600")) {
340 printk ("%s: unable to get IRQ %d\n", dev->name, DE600_IRQ);
341 return 1;
342 }
343 irq2dev_map[DE600_IRQ] = dev;
344
345 MOD_INC_USE_COUNT;
346 dev->start = 1;
347 if (adapter_init(dev)) {
348 return 1;
349 }
350
351 return 0;
352 }
353
354 /*
355 * The inverse routine to de600_open().
356 */
357 static int
358 de600_close(struct device *dev)
/* */
359 {
360 select_nic();
361 rx_page = 0;
362 de600_put_command(RESET);
363 de600_put_command(STOP_RESET);
364 de600_put_command(0);
365 select_prn();
366
367 if (dev->start) {
368 free_irq(DE600_IRQ);
369 irq2dev_map[DE600_IRQ] = NULL;
370 dev->start = 0;
371 MOD_DEC_USE_COUNT;
372 }
373 return 0;
374 }
375
376 static struct netstats *
377 get_stats(struct device *dev)
/* */
378 {
379 return (struct netstats *)(dev->priv);
380 }
381
382 static inline void
383 trigger_interrupt(struct device *dev)
/* */
384 {
385 de600_put_command(FLIP_IRQ);
386 select_prn();
387 DE600_SLOW_DOWN;
388 select_nic();
389 de600_put_command(0);
390 }
391
392 /*
393 * Copy a buffer to the adapter transmit page memory.
394 * Start sending.
395 */
396 static int
397 de600_start_xmit(struct sk_buff *skb, struct device *dev)
/* */
398 {
399 int transmit_from;
400 int len;
401 int tickssofar;
402 byte *buffer = skb->data;
403
404 /*
405 * If some higher layer thinks we've missed a
406 * tx-done interrupt we are passed NULL.
407 * Caution: dev_tint() handles the cli()/sti() itself.
408 */
409
410 if (skb == NULL) {
411 dev_tint(dev);
412 return 0;
413 }
414
415 if (free_tx_pages <= 0) { /* Do timeouts, to avoid hangs. */
416 tickssofar = jiffies - dev->trans_start;
417
418 if (tickssofar < 5)
419 return 1;
420
421 /* else */
422 printk("%s: transmit timed out (%d), %s?\n",
423 dev->name,
424 tickssofar,
425 "network cable problem"
426 );
427 /* Restart the adapter. */
428 if (adapter_init(dev)) {
429 return 1;
430 }
431 }
432
433 /* Start real output */
434 PRINTK(("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages));
435
436 if ((len = skb->len) < RUNT)
437 len = RUNT;
438
439 cli();
440 select_nic();
441 tx_fifo[tx_fifo_in] = transmit_from = tx_page_adr(tx_fifo_in) - len;
442 tx_fifo_in = (tx_fifo_in + 1) % TX_PAGES; /* Next free tx page */
443
444 #ifdef CHECK_LOST_DE600
445 /* This costs about 40 instructions per packet... */
446 de600_setup_address(NODE_ADDRESS, RW_ADDR);
447 de600_read_byte(READ_DATA, dev);
448 if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) {
449 if (adapter_init(dev)) {
450 sti();
451 return 1;
452 }
453 }
454 #endif
455
456 de600_setup_address(transmit_from, RW_ADDR);
457 for ( ; len > 0; --len, ++buffer)
458 de600_put_byte(*buffer);
459
460 if (free_tx_pages-- == TX_PAGES) { /* No transmission going on */
461 dev->trans_start = jiffies;
462 dev->tbusy = 0; /* allow more packets into adapter */
463 /* Send page and generate a faked interrupt */
464 de600_setup_address(transmit_from, TX_ADDR);
465 de600_put_command(TX_ENABLE);
466 }
467 else {
468 dev->tbusy = !free_tx_pages;
469 select_prn();
470 }
471
472 sti(); /* interrupts back on */
473
474 #ifdef FAKE_SMALL_MAX
475 /* This will "patch" the socket TCP proto at an early moment */
476 if (skb->sk && (skb->sk->protocol == IPPROTO_TCP) &&
477 (skb->sk->prot->rspace != &de600_rspace))
478 skb->sk->prot->rspace = de600_rspace; /* Ugh! */
479 #endif
480
481 dev_kfree_skb (skb, FREE_WRITE);
482
483 return 0;
484 }
485
486 /*
487 * The typical workload of the driver:
488 * Handle the network interface interrupts.
489 */
490 static void
491 de600_interrupt(int irq, struct pt_regs * regs)
/* */
492 {
493 struct device *dev = irq2dev_map[irq];
494 byte irq_status;
495 int retrig = 0;
496 int boguscount = 0;
497
498 /* This might just as well be deleted now, no crummy drivers present :-) */
499 if ((dev == NULL) || (dev->start == 0) || (DE600_IRQ != irq)) {
500 printk("%s: bogus interrupt %d\n", dev?dev->name:"DE-600", irq);
501 return;
502 }
503
504 dev->interrupt = 1;
505 select_nic();
506 irq_status = de600_read_status(dev);
507
508 do {
509 PRINTK(("de600_interrupt (%02X)\n", irq_status));
510
511 if (irq_status & RX_GOOD)
512 de600_rx_intr(dev);
513 else if (!(irq_status & RX_BUSY))
514 de600_put_command(RX_ENABLE);
515
516 /* Any transmission in progress? */
517 if (free_tx_pages < TX_PAGES)
518 retrig = de600_tx_intr(dev, irq_status);
519 else
520 retrig = 0;
521
522 irq_status = de600_read_status(dev);
523 } while ( (irq_status & RX_GOOD) || ((++boguscount < 100) && retrig) );
524 /*
525 * Yeah, it _looks_ like busy waiting, smells like busy waiting
526 * and I know it's not PC, but please, it will only occur once
527 * in a while and then only for a loop or so (< 1ms for sure!)
528 */
529
530 /* Enable adapter interrupts */
531 dev->interrupt = 0;
532 select_prn();
533
534 if (retrig)
535 trigger_interrupt(dev);
536
537 sti();
538 return;
539 }
540
541 static int
542 de600_tx_intr(struct device *dev, int irq_status)
/* */
543 {
544 /*
545 * Returns 1 if tx still not done
546 */
547
548 mark_bh(NET_BH);
549 /* Check if current transmission is done yet */
550 if (irq_status & TX_BUSY)
551 return 1; /* tx not done, try again */
552
553 /* else */
554 /* If last transmission OK then bump fifo index */
555 if (!(irq_status & TX_FAILED16)) {
556 tx_fifo_out = (tx_fifo_out + 1) % TX_PAGES;
557 ++free_tx_pages;
558 ((struct netstats *)(dev->priv))->tx_packets++;
559 dev->tbusy = 0;
560 }
561
562 /* More to send, or resend last packet? */
563 if ((free_tx_pages < TX_PAGES) || (irq_status & TX_FAILED16)) {
564 dev->trans_start = jiffies;
565 de600_setup_address(tx_fifo[tx_fifo_out], TX_ADDR);
566 de600_put_command(TX_ENABLE);
567 return 1;
568 }
569 /* else */
570
571 return 0;
572 }
573
574 /*
575 * We have a good packet, get it out of the adapter.
576 */
577 static void
578 de600_rx_intr(struct device *dev)
/* */
579 {
580 struct sk_buff *skb;
581 int i;
582 int read_from;
583 int size;
584 register unsigned char *buffer;
585
586 cli();
587 /* Get size of received packet */
588 size = de600_read_byte(RX_LEN, dev); /* low byte */
589 size += (de600_read_byte(RX_LEN, dev) << 8); /* high byte */
590 size -= 4; /* Ignore trailing 4 CRC-bytes */
591
592 /* Tell adapter where to store next incoming packet, enable receiver */
593 read_from = rx_page_adr();
594 next_rx_page();
595 de600_put_command(RX_ENABLE);
596 sti();
597
598 if ((size < 32) || (size > 1535)) {
599 printk("%s: Bogus packet size %d.\n", dev->name, size);
600 if (size > 10000)
601 adapter_init(dev);
602 return;
603 }
604
605 skb = dev_alloc_skb(size+2);
606 sti();
607 if (skb == NULL) {
608 printk("%s: Couldn't allocate a sk_buff of size %d.\n",
609 dev->name, size);
610 return;
611 }
612 /* else */
613
614 skb->dev = dev;
615 skb_reserve(skb,2); /* Align */
616
617 /* 'skb->data' points to the start of sk_buff data area. */
618 buffer = skb_put(skb,size);
619
620 /* copy the packet into the buffer */
621 de600_setup_address(read_from, RW_ADDR);
622 for (i = size; i > 0; --i, ++buffer)
623 *buffer = de600_read_byte(READ_DATA, dev);
624
625 ((struct netstats *)(dev->priv))->rx_packets++; /* count all receives */
626
627 skb->protocol=eth_type_trans(skb,dev);
628
629 netif_rx(skb);
630 /*
631 * If any worth-while packets have been received, netif_rx()
632 * has done a mark_bh(INET_BH) for us and will work on them
633 * when we get to the bottom-half routine.
634 */
635 }
636
637 int
638 de600_probe(struct device *dev)
/* */
639 {
640 int i;
641 static struct netstats de600_netstats;
642 /*dev->priv = kmalloc(sizeof(struct netstats), GFP_KERNEL);*/
643
644 printk("%s: D-Link DE-600 pocket adapter", dev->name);
645 /* Alpha testers must have the version number to report bugs. */
646 if (de600_debug > 1)
647 printk(version);
648
649 /* probe for adapter */
650 rx_page = 0;
651 select_nic();
652 (void)de600_read_status(dev);
653 de600_put_command(RESET);
654 de600_put_command(STOP_RESET);
655 if (de600_read_status(dev) & 0xf0) {
656 printk(": not at I/O %#3x.\n", DATA_PORT);
657 return ENODEV;
658 }
659
660 /*
661 * Maybe we found one,
662 * have to check if it is a D-Link DE-600 adapter...
663 */
664
665 /* Get the adapter ethernet address from the ROM */
666 de600_setup_address(NODE_ADDRESS, RW_ADDR);
667 for (i = 0; i < ETH_ALEN; i++) {
668 dev->dev_addr[i] = de600_read_byte(READ_DATA, dev);
669 dev->broadcast[i] = 0xff;
670 }
671
672 /* Check magic code */
673 if ((dev->dev_addr[1] == 0xde) && (dev->dev_addr[2] == 0x15)) {
674 /* OK, install real address */
675 dev->dev_addr[0] = 0x00;
676 dev->dev_addr[1] = 0x80;
677 dev->dev_addr[2] = 0xc8;
678 dev->dev_addr[3] &= 0x0f;
679 dev->dev_addr[3] |= 0x70;
680 } else {
681 printk(" not identified in the printer port\n");
682 return ENODEV;
683 }
684
685 #if 0 /* Not yet */
686 if (check_region(DE600_IO, 3)) {
687 printk(", port 0x%x busy\n", DE600_IO);
688 return EBUSY;
689 }
690 #endif
691 request_region(DE600_IO, 3, "de600");
692
693 printk(", Ethernet Address: %02X", dev->dev_addr[0]);
694 for (i = 1; i < ETH_ALEN; i++)
695 printk(":%02X",dev->dev_addr[i]);
696 printk("\n");
697
698 /* Initialize the device structure. */
699 /*dev->priv = kmalloc(sizeof(struct netstats), GFP_KERNEL);*/
700 dev->priv = &de600_netstats;
701
702 memset(dev->priv, 0, sizeof(struct netstats));
703 dev->get_stats = get_stats;
704
705 dev->open = de600_open;
706 dev->stop = de600_close;
707 dev->hard_start_xmit = &de600_start_xmit;
708
709 ether_setup(dev);
710
711 dev->flags&=~IFF_MULTICAST;
712
713 select_prn();
714 return 0;
715 }
716
717 static int
718 adapter_init(struct device *dev)
/* */
719 {
720 int i;
721 long flags;
722
723 save_flags(flags);
724 cli();
725
726 select_nic();
727 rx_page = 0; /* used by RESET */
728 de600_put_command(RESET);
729 de600_put_command(STOP_RESET);
730 #ifdef CHECK_LOST_DE600
731 /* Check if it is still there... */
732 /* Get the some bytes of the adapter ethernet address from the ROM */
733 de600_setup_address(NODE_ADDRESS, RW_ADDR);
734 de600_read_byte(READ_DATA, dev);
735 if ((de600_read_byte(READ_DATA, dev) != 0xde) ||
736 (de600_read_byte(READ_DATA, dev) != 0x15)) {
737 /* was: if (de600_read_status(dev) & 0xf0) { */
738 printk("Something has happened to the DE-600! Please check it"
739 #ifdef SHUTDOWN_WHEN_LOST
740 " and do a new ifconfig"
741 #endif /* SHUTDOWN_WHEN_LOST */
742 "!\n");
743 #ifdef SHUTDOWN_WHEN_LOST
744 /* Goodbye, cruel world... */
745 dev->flags &= ~IFF_UP;
746 de600_close(dev);
747 #endif /* SHUTDOWN_WHEN_LOST */
748 was_down = 1;
749 dev->tbusy = 1; /* Transmit busy... */
750 restore_flags(flags);
751 return 1; /* failed */
752 }
753 #endif /* CHECK_LOST_DE600 */
754 if (was_down) {
755 printk("Thanks, I feel much better now!\n");
756 was_down = 0;
757 }
758
759 dev->tbusy = 0; /* Transmit busy... */
760 dev->interrupt = 0;
761 tx_fifo_in = 0;
762 tx_fifo_out = 0;
763 free_tx_pages = TX_PAGES;
764
765 /* set the ether address. */
766 de600_setup_address(NODE_ADDRESS, RW_ADDR);
767 for (i = 0; i < ETH_ALEN; i++)
768 de600_put_byte(dev->dev_addr[i]);
769
770 /* where to start saving incoming packets */
771 rx_page = RX_BP | RX_BASE_PAGE;
772 de600_setup_address(MEM_4K, RW_ADDR);
773 /* Enable receiver */
774 de600_put_command(RX_ENABLE);
775 select_prn();
776 restore_flags(flags);
777
778 return 0; /* OK */
779 }
780
781 #ifdef FAKE_SMALL_MAX
782 /*
783 * The new router code (coming soon 8-) ) will fix this properly.
784 */
785 #define DE600_MIN_WINDOW 1024
786 #define DE600_MAX_WINDOW 2048
787 #define DE600_TCP_WINDOW_DIFF 1024
788 /*
789 * Copied from "net/inet/sock.c"
790 *
791 * Sets a lower max receive window in order to achieve <= 2
792 * packets arriving at the adapter in fast succession.
793 * (No way that a DE-600 can keep up with a net saturated
794 * with packets homing in on it :-( )
795 *
796 * Since there are only 2 receive buffers in the DE-600
797 * and it takes some time to copy from the adapter,
798 * this is absolutely necessary for any TCP performance whatsoever!
799 *
800 * Note that the returned window info will never be smaller than
801 * DE600_MIN_WINDOW, i.e. 1024
802 * This differs from the standard function, that can return an
803 * arbitrarily small window!
804 */
805 #define min(a,b) ((a)<(b)?(a):(b))
806 static unsigned long
807 de600_rspace(struct sock *sk)
/* */
808 {
809 int amt;
810
811 if (sk != NULL) {
812 /*
813 * Hack! You might want to play with commenting away the following line,
814 * if you know what you do!
815 sk->max_unacked = DE600_MAX_WINDOW - DE600_TCP_WINDOW_DIFF;
816 */
817
818 if (sk->rmem_alloc >= sk->rcvbuf-2*DE600_MIN_WINDOW) return(0);
819 amt = min((sk->rcvbuf-sk->rmem_alloc)/2/*-DE600_MIN_WINDOW*/, DE600_MAX_WINDOW);
820 if (amt < 0) return(0);
821 return(amt);
822 }
823 return(0);
824 }
825 #endif
826
827 #ifdef MODULE
828 static char nullname[8];
829 static struct device de600_dev = {
830 nullname, 0, 0, 0, 0, 0, 0, 0, 0, 0, NULL, de600_probe };
831
832 int
833 init_module(void)
/* */
834 {
835 if (register_netdev(&de600_dev) != 0)
836 return -EIO;
837 return 0;
838 }
839
840 void
841 cleanup_module(void)
/* ![[last]](../icons/n_last.png)
*/
842 {
843 unregister_netdev(&de600_dev);
844 release_region(DE600_IO, 3);
845 }
846 #endif /* MODULE */
847 /*
848 * Local variables:
849 * kernel-compile-command: "gcc -D__KERNEL__ -Ilinux/include -I../../net/inet -Wall -Wstrict-prototypes -O2 -m486 -c de600.c"
850 * module-compile-command: "gcc -D__KERNEL__ -DMODULE -Ilinux/include -I../../net/inet -Wall -Wstrict-prototypes -O2 -m486 -c de600.c"
851 * compile-command: "gcc -D__KERNEL__ -DMODULE -Ilinux/include -I../../net/inet -Wall -Wstrict-prototypes -O2 -m486 -c de600.c"
852 * End:
853 */
![[bottom]](../icons/n_bottom.png){kind=icon}
*/