This source file includes following definitions.
- can_select_option
- think_positively
- ask_value
- rebuild_file
- use_old_config
- build_defines
- main
- bin2hex
1 #define DISABLED_OPTIONS (B(OPT_PNP))
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29 #include <stdio.h>
30 #include <unistd.h>
31 #include <stdlib.h>
32
33 #define B(x) (1 << (x))
34
35
36
37
38
39 #define OPT_PAS 0
40 #define OPT_SB 1
41 #define OPT_ADLIB 2
42 #define OPT_LAST_MUTUAL 2
43
44 #define OPT_GUS 3
45 #define OPT_MPU401 4
46 #define OPT_UART6850 5
47 #define OPT_PSS 6
48 #define OPT_GUS16 7
49 #define OPT_GUSMAX 8
50 #define OPT_MSS 9
51 #define OPT_SSCAPE 10
52 #define OPT_TRIX 11
53 #define OPT_MAD16 12
54 #define OPT_CS4232 13
55 #define OPT_MAUI 14
56 #define OPT_PNP 15
57
58 #define OPT_HIGHLEVEL 16
59 #define OPT_SBPRO 16
60 #define OPT_SB16 17
61 #define OPT_AEDSP16 18
62 #define OPT_AUDIO 19
63 #define OPT_MIDI_AUTO 20
64 #define OPT_MIDI 21
65 #define OPT_YM3812_AUTO 22
66 #define OPT_YM3812 23
67 #define OPT_SEQUENCER 24
68 #define OPT_LAST 24
69
70
71 #define ANY_DEVS (B(OPT_AUDIO)|B(OPT_MIDI)|B(OPT_SEQUENCER)|B(OPT_GUS)| \
72 B(OPT_MPU401)|B(OPT_PSS)|B(OPT_GUS16)|B(OPT_GUSMAX)| \
73 B(OPT_MSS)|B(OPT_SSCAPE)|B(OPT_UART6850)|B(OPT_TRIX)| \
74 B(OPT_MAD16)|B(OPT_CS4232)|B(OPT_MAUI))
75 #define AUDIO_CARDS (B (OPT_PSS) | B (OPT_SB) | B (OPT_PAS) | B (OPT_GUS) | \
76 B (OPT_MSS) | B (OPT_GUS16) | B (OPT_GUSMAX) | B (OPT_TRIX) | \
77 B (OPT_SSCAPE)| B(OPT_MAD16) | B(OPT_CS4232))
78 #define MIDI_CARDS (B (OPT_PSS) | B (OPT_SB) | B (OPT_PAS) | B (OPT_MPU401) | \
79 B (OPT_GUS) | B (OPT_TRIX) | B (OPT_SSCAPE)|B(OPT_MAD16) | \
80 B (OPT_CS4232)|B(OPT_MAUI))
81 #define MPU_DEVS (B(OPT_PSS)|B(OPT_SSCAPE)|B(OPT_TRIX)|B(OPT_MAD16)|\
82 B(OPT_CS4232)|B(OPT_PNP)|B(OPT_MAUI))
83 #define AD1848_DEVS (B(OPT_GUS16)|B(OPT_MSS)|B(OPT_PSS)|B(OPT_GUSMAX)|\
84 B(OPT_SSCAPE)|B(OPT_TRIX)|B(OPT_MAD16)|B(OPT_CS4232)|\
85 B(OPT_PNP))
86
87
88
89
90
91
92 typedef struct
93 {
94 unsigned long conditions;
95 unsigned long exclusive_options;
96 char macro[20];
97 int verify;
98 int alias;
99 int default_answ;
100 }
101
102 hw_entry;
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119 hw_entry hw_table[] =
120 {
121
122
123
124 {0, 0, "PAS", 1, 0, 0},
125 {0, 0, "SB", 1, 0, 0},
126 {0, B (OPT_PAS) | B (OPT_SB), "ADLIB", 1, 0, 0},
127
128 {0, 0, "GUS", 1, 0, 0},
129 {0, 0, "MPU401", 1, 0, 0},
130 {0, 0, "UART6850", 1, 0, 0},
131 {0, 0, "PSS", 1, 0, 0},
132 {B (OPT_GUS), 0, "GUS16", 1, 0, 0},
133 {B (OPT_GUS), B (OPT_GUS16), "GUSMAX", 1, 0, 0},
134 {0, 0, "MSS", 1, 0, 0},
135 {0, 0, "SSCAPE", 1, 0, 0},
136 {0, 0, "TRIX", 1, 0, 0},
137 {0, 0, "MAD16", 1, 0, 0},
138 {0, 0, "CS4232", 1, 0, 0},
139 {0, 0, "MAUI", 1, 0, 0},
140 {0, 0, "PNP", 1, 0, 0},
141
142 {B (OPT_SB), B (OPT_PAS), "SBPRO", 1, 0, 1},
143 {B (OPT_SB) | B (OPT_SBPRO), B (OPT_PAS), "SB16", 1, 0, 1},
144 {B (OPT_SBPRO) | B (OPT_MSS) | B (OPT_MPU401), 0, "AEDSP16", 1, 0, 0},
145 {AUDIO_CARDS, 0, "AUDIO", 1, 0, 1},
146 {B (OPT_MPU401) | B (OPT_MAUI), 0, "MIDI_AUTO", 0, OPT_MIDI, 0},
147 {MIDI_CARDS, 0, "MIDI", 1, 0, 1},
148 {B (OPT_ADLIB), 0, "YM3812_AUTO", 0, OPT_YM3812, 0},
149 {B (OPT_PSS) | B (OPT_SB) | B (OPT_PAS) | B (OPT_ADLIB) | B (OPT_MSS) | B (OPT_PSS), B (OPT_YM3812_AUTO), "YM3812", 1, 0, 1},
150 {B (OPT_MIDI) | B (OPT_YM3812) | B (OPT_YM3812_AUTO) | B (OPT_GUS), 0, "SEQUENCER", 0, 0, 1}
151 };
152
153 char *questions[] =
154 {
155 "ProAudioSpectrum 16 support",
156 "SoundBlaster support",
157 "Generic OPL2/OPL3 FM synthesizer support",
158 "Gravis Ultrasound support",
159 "MPU-401 support (NOT for SB16)",
160 "6850 UART Midi support",
161 "PSS (ECHO-ADI2111) support",
162 "16 bit sampling option of GUS (_NOT_ GUS MAX)",
163 "GUS MAX support",
164 "Microsoft Sound System support",
165 "Ensoniq Soundscape support",
166 "MediaTriX AudioTriX Pro support",
167 "Support for MAD16 and/or Mozart based cards",
168 "Support for Crystal CS4232 based (PnP) cards",
169 "Support for Turtle Beach Wave Front (Maui, Tropez) synthesizers",
170 "Support for PnP soundcards (_EXPERIMENTAL_)",
171
172 "SoundBlaster Pro support",
173 "SoundBlaster 16 support",
174 "Audio Excel DSP 16 initialization support",
175 "/dev/dsp and /dev/audio supports (usually required)",
176 "This should not be asked",
177 "MIDI interface support",
178 "This should not be asked",
179 "FM synthesizer (YM3812/OPL-3) support",
180 "/dev/sequencer support",
181 "Is the sky really falling"
182 };
183
184 struct kludge
185 {
186 char *name;
187 int mask;
188 }
189 extra_options[] =
190 {
191 {
192 "MPU_EMU", MPU_DEVS
193 }
194 ,
195 {
196 "AD1848", AD1848_DEVS
197 }
198 ,
199 {
200 NULL, 0
201 }
202 };
203
204 char *oldconf = "/etc/soundconf";
205
206 int old_config_used = 0;
207
208 unsigned long selected_options = 0;
209 int sb_dma = 0;
210
211 void build_defines (void);
212
213 #include "hex2hex.h"
214 int bin2hex (char *path, char *target, char *varname);
215
216 int
217 can_select_option (int nr)
218 {
219
220 if (hw_table[nr].conditions)
221 if (!(hw_table[nr].conditions & selected_options))
222 return 0;
223
224 if (hw_table[nr].exclusive_options)
225 if (hw_table[nr].exclusive_options & selected_options)
226 return 0;
227
228 if (DISABLED_OPTIONS & B (nr))
229 return 0;
230
231 return 1;
232 }
233
234 int
235 think_positively (int def_answ)
236 {
237 char answ[512];
238 int len;
239
240 if ((len = read (0, answ, sizeof (answ))) < 1)
241 {
242 fprintf (stderr, "\n\nERROR! Cannot read stdin\n");
243
244 perror ("stdin");
245 printf ("#undef CONFIGURE_SOUNDCARD\n");
246 printf ("#undef KERNEL_SOUNDCARD\n");
247 exit (-1);
248 }
249
250 if (len < 2)
251
252
253 return def_answ;
254
255 answ[len - 1] = 0;
256
257 if (!strcmp (answ, "y") || !strcmp (answ, "Y"))
258 return 1;
259
260 return 0;
261 }
262
263 int
264 ask_value (char *format, int default_answer)
265 {
266 char answ[512];
267 int len, num;
268
269 play_it_again_Sam:
270
271 if ((len = read (0, answ, sizeof (answ))) < 1)
272 {
273 fprintf (stderr, "\n\nERROR! Cannot read stdin\n");
274
275 perror ("stdin");
276 printf ("#undef CONFIGURE_SOUNDCARD\n");
277 printf ("#undef KERNEL_SOUNDCARD\n");
278 exit (-1);
279 }
280
281 if (len < 2)
282
283
284 return default_answer;
285
286 answ[len - 1] = 0;
287
288 if (sscanf (answ, format, &num) != 1)
289 {
290 fprintf (stderr, "Illegal format. Try again: ");
291 goto play_it_again_Sam;
292 }
293
294 return num;
295 }
296
297 void
298 rebuild_file (char *line)
299 {
300 char *method, *new, *old, *var, *p;
301
302 method = p = line;
303
304 while (*p && *p != ' ')
305 p++;
306 *p++ = 0;
307
308 old = p;
309 while (*p && *p != ' ')
310 p++;
311 *p++ = 0;
312
313 new = p;
314 while (*p && *p != ' ')
315 p++;
316 *p++ = 0;
317
318 var = p;
319 while (*p && *p != ' ')
320 p++;
321 *p++ = 0;
322
323 fprintf (stderr, "Rebuilding file %s (%s %s)\n", new, method, old);
324
325 if (strcmp (method, "bin2hex") == 0)
326 {
327 if (!bin2hex (old, new, var))
328 {
329 fprintf (stderr, "Rebuild failed\n");
330 exit (-1);
331 }
332 }
333 else if (strcmp (method, "hex2hex") == 0)
334 {
335 if (!hex2hex (old, new, var))
336 {
337 fprintf (stderr, "Rebuild failed\n");
338 exit (-1);
339 }
340 }
341 else
342 {
343 fprintf (stderr, "Failed to build '%s' - unknown method %s\n",
344 new, method);
345 exit (-1);
346 }
347 }
348
349 int
350 use_old_config (char *filename)
351 {
352 char buf[1024];
353 int i = 0;
354
355 FILE *oldf;
356
357 fprintf (stderr, "Copying old configuration from %s\n", filename);
358
359 if ((oldf = fopen (filename, "r")) == NULL)
360 {
361 fprintf (stderr, "Couldn't open previous configuration file\n");
362 perror (filename);
363 return 0;
364 }
365
366 while (fgets (buf, 1024, oldf) != NULL)
367 {
368 char tmp[100];
369
370 if (buf[0] != '#')
371 {
372 printf ("%s", buf);
373
374 strncpy (tmp, buf, 8);
375 tmp[8] = 0;
376
377 if (strcmp (tmp, "/*build ") == 0)
378 rebuild_file (&buf[8]);
379
380 continue;
381 }
382
383 strncpy (tmp, buf, 8);
384 tmp[8] = 0;
385
386 if (strcmp (tmp, "#define ") == 0)
387 {
388 char *id = &buf[8];
389
390 i = 0;
391 while (id[i] && id[i] != ' ' &&
392 id[i] != '\t' && id[i] != '\n')
393 i++;
394
395 strncpy (tmp, id, i);
396 tmp[i] = 0;
397
398 if (strcmp (tmp, "SELECTED_SOUND_OPTIONS") == 0)
399 continue;
400
401 tmp[8] = 0;
402 if (strcmp (tmp, "EXCLUDE_") == 0)
403 continue;
404
405 printf ("%s", buf);
406 continue;
407 }
408
409 if (strcmp (tmp, "#undef ") == 0)
410 {
411 char *id = &buf[8];
412
413 i = 0;
414 while (id[i] && id[i] != ' ' &&
415 id[i] != '\t' && id[i] != '\n')
416 i++;
417
418 strncpy (tmp, id, i);
419 tmp[i] = 0;
420
421 tmp[8] = 0;
422 if (strcmp (tmp, "EXCLUDE_") != 0)
423 continue;
424 strncpy (tmp, &id[8], i - 8);
425 tmp[i - 8] = 0;
426
427 for (i = 0; i <= OPT_LAST; i++)
428 if (strcmp (hw_table[i].macro, tmp) == 0)
429 {
430 selected_options |= (1 << i);
431 break;
432 }
433 continue;
434 }
435
436 printf ("%s", buf);
437 }
438 fclose (oldf);
439
440 for (i = 0; i <= OPT_LAST; i++)
441 if (!hw_table[i].alias)
442 if (selected_options & B (i))
443 printf ("#undef EXCLUDE_%s\n", hw_table[i].macro);
444 else
445 printf ("#define EXCLUDE_%s\n", hw_table[i].macro);
446
447
448 printf ("\n");
449
450 i = 0;
451
452 while (extra_options[i].name != NULL)
453 {
454 if (selected_options & extra_options[i].mask)
455 printf ("#undef EXCLUDE_%s\n", extra_options[i].name);
456 else
457 printf ("#define EXCLUDE_%s\n", extra_options[i].name);
458 i++;
459 }
460
461 printf ("\n");
462
463 printf ("#define SELECTED_SOUND_OPTIONS\t0x%08x\n", selected_options);
464 fprintf (stderr, "Old configuration copied.\n");
465
466 build_defines ();
467 old_config_used = 1;
468 return 1;
469 }
470
471 void
472 build_defines (void)
473 {
474 FILE *optf;
475 int i;
476
477 if ((optf = fopen (".defines", "w")) == NULL)
478 {
479 perror (".defines");
480 exit (-1);
481 }
482
483
484 for (i = 0; i <= OPT_LAST; i++)
485 if (!hw_table[i].alias)
486 if (selected_options & B (i))
487 fprintf (optf, "CONFIG_%s=y\n", hw_table[i].macro);
488
489
490 fprintf (optf, "\n");
491
492 i = 0;
493
494 while (extra_options[i].name != NULL)
495 {
496 if (selected_options & extra_options[i].mask)
497 fprintf (optf, "CONFIG_%s=y\n", extra_options[i].name);
498 i++;
499 }
500
501 fprintf (optf, "\n");
502 fclose (optf);
503 }
504
505 int
506 main (int argc, char *argv[])
507 {
508 int i, num, def_size, full_driver = 1;
509 char answ[10];
510 int sb_base = 0;
511 char old_config_file[200];
512
513 fprintf (stderr, "\nConfiguring the sound support\n\n");
514
515 if (getuid () != 0)
516 {
517 char *home;
518
519 if ((home = getenv ("HOME")) != NULL)
520 {
521 sprintf (old_config_file, "%s/.soundconf", home);
522 oldconf = old_config_file;
523 }
524 }
525
526 if (argc > 1)
527 {
528 if (strcmp (argv[1], "-o") == 0 &&
529 use_old_config (oldconf))
530 exit (0);
531 }
532
533 if (access (oldconf, R_OK) == 0)
534 {
535 fprintf (stderr, "Old configuration exists in %s. Use it (y/n) ? ",
536 oldconf);
537 if (think_positively (1))
538 if (use_old_config (oldconf))
539 exit (0);
540
541 }
542
543 printf ("/*\tGenerated by configure. Don't edit!!!!\t*/\n\n");
544
545 {
546
547
548
549
550 full_driver = 0;
551
552 for (i = 0; i <= OPT_LAST; i++)
553 if (can_select_option (i))
554 {
555 if (!(selected_options & B (i)))
556
557
558 if (!hw_table[i].verify)
559 {
560 if (hw_table[i].alias)
561 selected_options |= B (hw_table[i].alias);
562 else
563 selected_options |= B (i);
564 }
565 else
566 {
567 int def_answ = hw_table[i].default_answ;
568
569 fprintf (stderr,
570 def_answ ? " %s (y/n) ? " : " %s (n/y) ? ",
571 questions[i]);
572 if (think_positively (def_answ))
573 if (hw_table[i].alias)
574 selected_options |= B (hw_table[i].alias);
575 else
576 selected_options |= B (i);
577 }
578 }
579 }
580
581 if (selected_options & B (OPT_SBPRO))
582 {
583 fprintf (stderr, "Do you want support for the mixer of SG NX Pro ? ");
584 if (think_positively (0))
585 printf ("#define __SGNXPRO__\n");
586 }
587
588 if (selected_options & B (OPT_SB))
589 {
590 fprintf (stderr, "Do you want support for the MV Jazz16 (ProSonic etc.) ? ");
591 if (think_positively (0))
592 {
593 printf ("#define JAZZ16\n");
594 do
595 {
596 fprintf (stderr, "\tValid 16 bit DMA channels for ProSonic/Jazz 16 are\n");
597 fprintf (stderr, "\t1, 3, 5 (default), 7\n");
598 fprintf (stderr, "\tEnter 16bit DMA channel for Prosonic : ");
599 num = ask_value ("%d", 5);
600 }
601 while (num != 1 && num != 3 && num != 5 && num != 7);
602 fprintf (stderr, "ProSonic 16 bit DMA set to %d\n", num);
603 printf ("#define JAZZ_DMA16 %d\n", num);
604
605 fprintf (stderr, "Do you have SoundMan Wave (n/y) ? ");
606
607 if (think_positively (0))
608 {
609 printf ("#define SM_WAVE\n");
610
611 midi0001_again:
612 fprintf
613 (stderr,
614 "Logitech SoundMan Wave has a microcontroller which must be initialized\n"
615 "before MIDI emulation works. This is possible only if the microcode\n"
616 "file is compiled into the driver.\n"
617 "Do you have access to the MIDI0001.BIN file (y/n) ? ");
618 if (think_positively (1))
619 {
620 char path[512];
621
622 fprintf (stderr,
623 "Enter full name of the MIDI0001.BIN file (pwd is sound): ");
624 scanf ("%s", path);
625 fprintf (stderr, "including microcode file %s\n", path);
626
627 if (!bin2hex (path, "smw-midi0001.h", "smw_ucode"))
628 {
629 fprintf (stderr, "couldn't open %s file\n",
630 path);
631 fprintf (stderr, "try again with correct path? ");
632 if (think_positively (1))
633 goto midi0001_again;
634 }
635 else
636 {
637 printf ("#define SMW_MIDI0001_INCLUDED\n");
638 printf ("/*build bin2hex %s smw-midi0001.h smw_ucode */\n", path);
639 }
640 }
641 }
642 }
643 }
644
645 if (selected_options & B (OPT_SBPRO))
646 {
647 fprintf (stderr, "\n\nThe Logitech SoundMan Games supports 44 kHz in stereo\n"
648 "while the standard SB Pro supports just 22 kHz/stereo\n"
649 "You have an option to enable the SM Games mode.\n"
650 "However do enable it only if you are _sure_ that your\n"
651 "card is a SM Games. Enabling this feature with a\n"
652 "plain old SB Pro _will_ cause troubles with stereo mode.\n"
653 "\n"
654 "DANGER! Read the above once again before answering 'y'\n"
655 "Answer 'n' in case you are unsure what to do!\n");
656 fprintf (stderr, "Do you have a Logitech SoundMan Games (n/y) ? ");
657 if (think_positively (0))
658 printf ("#define SM_GAMES\n");
659 }
660
661 if (selected_options & B (OPT_SB16))
662 selected_options |= B (OPT_SBPRO);
663
664 if (selected_options & B (OPT_AEDSP16))
665 {
666 int sel1 = 0;
667
668 if (selected_options & B (OPT_SBPRO))
669 {
670 fprintf (stderr, "Do you want support for the Audio Excel SoundBlaster pro mode ? ");
671 if (think_positively (1))
672 {
673 printf ("#define AEDSP16_SBPRO\n");
674 sel1 = 1;
675 }
676 }
677
678 if ((selected_options & B (OPT_MSS)) && (sel1 == 0))
679 {
680 fprintf (stderr, "Do you want support for the Audio Excel Microsoft Sound System mode? ");
681 if (think_positively (1))
682 {
683 printf ("#define AEDSP16_MSS\n");
684 sel1 = 1;
685 }
686 }
687
688 if (sel1 == 0)
689 {
690 printf ("#undef CONFIGURE_SOUNDCARD\n");
691 printf ("#undef KERNEL_SOUNDCARD\n");
692 fprintf (stderr, "ERROR!!!!!\nYou loose: you must select at least one mode when using Audio Excel!\n");
693 exit (-1);
694 }
695 if (selected_options & B (OPT_MPU401))
696 printf ("#define AEDSP16_MPU401\n");
697 }
698
699 if (selected_options & B (OPT_PSS))
700 {
701 genld_again:
702 fprintf
703 (stderr,
704 "if you wish to emulate the soundblaster and you have a DSPxxx.LD.\n"
705 "then you must include the LD in the kernel.\n"
706 "Do you wish to include a LD (y/n) ? ");
707 if (think_positively (1))
708 {
709 char path[512];
710
711 fprintf (stderr,
712 "Enter the path to your LD file (pwd is sound): ");
713 scanf ("%s", path);
714 fprintf (stderr, "including LD file %s\n", path);
715
716 if (!bin2hex (path, "synth-ld.h", "pss_synth"))
717 {
718 fprintf (stderr, "couldn't open %s as the ld file\n",
719 path);
720 fprintf (stderr, "try again with correct path? ");
721 if (think_positively (1))
722 goto genld_again;
723 }
724 else
725 {
726 printf ("#define PSS_HAVE_LD\n");
727 printf ("/*build bin2hex %s synth-ld.h pss_synth */\n", path);
728 }
729 }
730 else
731 {
732 FILE *sf = fopen ("synth-ld.h", "w");
733
734 fprintf (sf, "/* automaticaly generated by configure */\n");
735 fprintf (sf, "unsigned char pss_synth[1];\n"
736 "#define pss_synthLen 0\n");
737 fclose (sf);
738 }
739 }
740
741 if (selected_options & B (OPT_TRIX))
742 {
743 hex2hex_again:
744 fprintf (stderr, "MediaTriX audioTriX Pro has a onboard microcontroller\n"
745 "which needs to be initialized by downloading\n"
746 "the code from file TRXPRO.HEX in the DOS driver\n"
747 "directory. If you don't have the TRXPRO.HEX handy\n"
748 "you may skip this step. However SB and MPU-401\n"
749 "modes of AudioTriX Pro will not work without\n"
750 "this file!\n"
751 "\n"
752 "Do you want to include TRXPRO.HEX in your kernel (y/n) ? ");
753
754 if (think_positively (1))
755 {
756 char path[512];
757
758 fprintf (stderr,
759 "Enter the path to your TRXPRO.HEX file (pwd is sound): ");
760 scanf ("%s", path);
761 fprintf (stderr, "including HEX file %s\n", path);
762
763 if (!hex2hex (path, "trix_boot.h", "trix_boot"))
764 goto hex2hex_again;
765 printf ("/*build hex2hex %s trix_boot.h trix_boot */\n", path);
766 printf ("#define INCLUDE_TRIX_BOOT\n");
767 }
768 }
769
770 if (!(selected_options & ANY_DEVS))
771 {
772 printf ("#undef CONFIGURE_SOUNDCARD\n");
773 printf ("#undef KERNEL_SOUNDCARD\n");
774 fprintf (stderr, "\n*** This combination is useless. Sound driver disabled!!! ***\n\n");
775 exit (0);
776 }
777 else
778 printf ("#define KERNEL_SOUNDCARD\n");
779
780 for (i = 0; i <= OPT_LAST; i++)
781 if (!hw_table[i].alias)
782 if (selected_options & B (i))
783 printf ("#undef EXCLUDE_%s\n", hw_table[i].macro);
784 else
785 printf ("#define EXCLUDE_%s\n", hw_table[i].macro);
786
787
788 printf ("\n");
789
790 i = 0;
791
792 while (extra_options[i].name != NULL)
793 {
794 if (selected_options & extra_options[i].mask)
795 printf ("#undef EXCLUDE_%s\n", extra_options[i].name);
796 else
797 printf ("#define EXCLUDE_%s\n", extra_options[i].name);
798 i++;
799 }
800
801 printf ("\n");
802
803
804
805 build_defines ();
806
807
808
809
810 if (selected_options & B (OPT_AEDSP16))
811 {
812 fprintf (stderr, "\nI/O base for Audio Excel DSP 16 ?\n"
813 "Warning:\n"
814 "If you are using Audio Excel SoundBlaster emulation,\n"
815 "you must use the same I/O base for Audio Excel and SoundBlaster.\n"
816 "The factory default is 220 (other possible value is 240)\n"
817 "Enter the Audio Excel DSP 16 I/O base: ");
818
819 num = ask_value ("%x", 0x220);
820 fprintf (stderr, "Audio Excel DSP 16 I/O base set to %03x\n", num);
821 printf ("#define AEDSP16_BASE 0x%03x\n", num);
822 }
823
824 if ((selected_options & B (OPT_SB)) && selected_options & (B (OPT_AUDIO) | B (OPT_MIDI)))
825 {
826 fprintf (stderr, "\nI/O base for SB?\n"
827 "The factory default is 220\n"
828 "Enter the SB I/O base: ");
829
830 sb_base = num = ask_value ("%x", 0x220);
831 fprintf (stderr, "SB I/O base set to %03x\n", num);
832 printf ("#define SBC_BASE 0x%03x\n", num);
833
834 fprintf (stderr, "\nIRQ number for SoundBlaster?\n"
835 "The IRQ address is defined by the jumpers on your card.\n"
836 "The factory default is either 5 or 7 (depending on the model).\n"
837 "Valid values are 9(=2), 5, 7 and 10.\n"
838 "Enter the value: ");
839
840 num = ask_value ("%d", 7);
841 if (num != 9 && num != 5 && num != 7 && num != 10)
842 {
843
844 fprintf (stderr, "*** Illegal input! ***\n");
845 num = 7;
846 }
847 fprintf (stderr, "SoundBlaster IRQ set to %d\n", num);
848
849 printf ("#define SBC_IRQ %d\n", num);
850
851 if (selected_options & (B (OPT_SBPRO) | B (OPT_PAS)))
852 {
853 fprintf (stderr, "\nDMA channel for SoundBlaster?\n"
854 "For SB 1.0, 1.5 and 2.0 this MUST be 1\n"
855 "SB Pro supports DMA channels 0, 1 and 3 (jumper)\n"
856 "For SB16 give the 8 bit DMA# here\n"
857 "The default value is 1\n"
858 "Enter the value: ");
859
860 num = ask_value ("%d", 1);
861 if (num < 0 || num > 3)
862 {
863
864 fprintf (stderr, "*** Illegal input! ***\n");
865 num = 1;
866 }
867 fprintf (stderr, "SoundBlaster DMA set to %d\n", num);
868 printf ("#define SBC_DMA %d\n", num);
869 sb_dma = num;
870 }
871
872 if (selected_options & B (OPT_SB16))
873 {
874
875 fprintf (stderr, "\n16 bit DMA channel for SoundBlaster 16?\n"
876 "Possible values are 5, 6 or 7\n"
877 "The default value is 6\n"
878 "Enter the value: ");
879
880 num = ask_value ("%d", 6);
881 if ((num < 5 || num > 7) && (num != sb_dma))
882 {
883
884 fprintf (stderr, "*** Illegal input! ***\n");
885 num = 6;
886 }
887 fprintf (stderr, "SoundBlaster DMA set to %d\n", num);
888 printf ("#define SB16_DMA %d\n", num);
889
890 fprintf (stderr, "\nI/O base for SB16 Midi?\n"
891 "Possible values are 300 and 330\n"
892 "The factory default is 330\n"
893 "Enter the SB16 Midi I/O base: ");
894
895 num = ask_value ("%x", 0x330);
896 fprintf (stderr, "SB16 Midi I/O base set to %03x\n", num);
897 printf ("#define SB16MIDI_BASE 0x%03x\n", num);
898 }
899 }
900
901 if (selected_options & B (OPT_PAS))
902 {
903
904 if (selected_options & (B (OPT_AUDIO) | B (OPT_MIDI)))
905 {
906 fprintf (stderr, "\nIRQ number for ProAudioSpectrum?\n"
907 "The recommended value is the IRQ used under DOS.\n"
908 "Please refer to the ProAudioSpectrum User's Guide.\n"
909 "The default value is 10.\n"
910 "Enter the value: ");
911
912 num = ask_value ("%d", 10);
913 if (num == 6 || num < 3 || num > 15 || num == 2)
914
915
916 {
917
918 fprintf (stderr, "*** Illegal input! ***\n");
919 num = 10;
920 }
921 fprintf (stderr, "ProAudioSpectrum IRQ set to %d\n", num);
922 printf ("#define PAS_IRQ %d\n", num);
923 }
924
925 if (selected_options & B (OPT_AUDIO))
926 {
927 fprintf (stderr, "\nDMA number for ProAudioSpectrum?\n"
928 "The recommended value is the DMA channel under DOS.\n"
929 "Please refer to the ProAudioSpectrum User's Guide.\n"
930 "The default value is 3\n"
931 "Enter the value: ");
932
933 num = ask_value ("%d", 3);
934 if (num == 4 || num < 0 || num > 7)
935 {
936
937 fprintf (stderr, "*** Illegal input! ***\n");
938 num = 3;
939 }
940 fprintf (stderr, "\nProAudioSpectrum DMA set to %d\n", num);
941 printf ("#define PAS_DMA %d\n", num);
942 }
943 fprintf (stderr, "\nEnable Joystick port on ProAudioSpectrum (n/y) ? ");
944 if (think_positively (0))
945 printf ("#define PAS_JOYSTICK_ENABLE\n");
946
947 fprintf (stderr, "PAS16 could be noisy with some mother boards\n"
948 "There is a command line switch (was it :T?)\n"
949 "in the DOS driver for PAS16 which solves this.\n"
950 "Don't enable this feature unless you have problems!\n"
951 "Do you have to use this switch with DOS (y/n) ?");
952 if (think_positively (0))
953 printf ("#define BROKEN_BUS_CLOCK\n");
954 }
955
956 if (selected_options & B (OPT_GUS))
957 {
958 fprintf (stderr, "\nI/O base for Gravis Ultrasound?\n"
959 "Valid choices are 210, 220, 230, 240, 250 or 260\n"
960 "The factory default is 220\n"
961 "Enter the GUS I/O base: ");
962
963 num = ask_value ("%x", 0x220);
964 if ((num > 0x260) || ((num & 0xf0f) != 0x200) || ((num & 0x0f0) > 0x060))
965 {
966
967 fprintf (stderr, "*** Illegal input! ***\n");
968 num = 0x220;
969 }
970
971 if ((selected_options & B (OPT_SB)) && (num == sb_base))
972 {
973 fprintf (stderr, "FATAL ERROR!!!!!!!!!!!!!!\n"
974 "\t0x220 cannot be used if SoundBlaster is enabled.\n"
975 "\tRun the config again.\n");
976 printf ("#undef CONFIGURE_SOUNDCARD\n");
977 printf ("#undef KERNEL_SOUNDCARD\n");
978 exit (-1);
979 }
980 fprintf (stderr, "GUS I/O base set to %03x\n", num);
981 printf ("#define GUS_BASE 0x%03x\n", num);
982
983 fprintf (stderr, "\nIRQ number for Gravis UltraSound?\n"
984 "The recommended value is the IRQ used under DOS.\n"
985 "Please refer to the Gravis Ultrasound User's Guide.\n"
986 "The default value is 15.\n"
987 "Enter the value: ");
988
989 num = ask_value ("%d", 15);
990 if (num == 6 || num < 3 || num > 15 || num == 2)
991
992
993 {
994
995 fprintf (stderr, "*** Illegal input! ***\n");
996 num = 15;
997 }
998 fprintf (stderr, "Gravis UltraSound IRQ set to %d\n", num);
999 printf ("#define GUS_IRQ %d\n", num);
1000
1001 fprintf (stderr, "\nDMA number for Gravis UltraSound?\n"
1002 "The recommended value is the DMA channel under DOS.\n"
1003 "Please refer to the Gravis Ultrasound User's Guide.\n"
1004 "The default value is 6\n"
1005 "Enter the value: ");
1006
1007 num = ask_value ("%d", 6);
1008 if (num == 4 || num < 0 || num > 7)
1009 {
1010 fprintf (stderr, "*** Illegal input! ***\n");
1011 num = 6;
1012 }
1013 fprintf (stderr, "\nGravis UltraSound DMA set to %d\n", num);
1014 printf ("#define GUS_DMA %d\n", num);
1015
1016 fprintf (stderr, "\nSecond DMA channel for GUS (optional)?\n"
1017 "The default value is 7 (-1 disables)\n"
1018 "Enter the value: ");
1019
1020 num = ask_value ("%d", 7);
1021 if (num > 7)
1022 {
1023 fprintf (stderr, "*** Illegal input! ***\n");
1024 num = 7;
1025 }
1026
1027 fprintf (stderr, "\nGUS DMA2 set to %d\n", num);
1028 printf ("#define GUS_DMA2 %d\n", num);
1029
1030 if (selected_options & B (OPT_GUS16))
1031 {
1032 fprintf (stderr, "\nI/O base for GUS16 (GUS 16 bit sampling option)?\n"
1033 "The factory default is 530\n"
1034 "Other possible values are 604, E80 or F40\n"
1035 "Enter the GUS16 I/O base: ");
1036
1037 num = ask_value ("%x", 0x530);
1038 fprintf (stderr, "GUS16 I/O base set to %03x\n", num);
1039 printf ("#define GUS16_BASE 0x%03x\n", num);
1040
1041 fprintf (stderr, "\nIRQ number for GUS16?\n"
1042 "Valid numbers are: 3, 4, 5, 7, or 9(=2).\n"
1043 "The default value is 7.\n"
1044 "Enter the value: ");
1045
1046 num = ask_value ("%d", 7);
1047 if (num == 6 || num < 3 || num > 15)
1048 {
1049 fprintf (stderr, "*** Illegal input! ***\n");
1050 num = 7;
1051 }
1052 fprintf (stderr, "GUS16 IRQ set to %d\n", num);
1053 printf ("#define GUS16_IRQ %d\n", num);
1054
1055 fprintf (stderr, "\nDMA number for GUS16?\n"
1056 "The default value is 3\n"
1057 "Enter the value: ");
1058
1059 num = ask_value ("%d", 3);
1060 if (num < 0 || num > 3)
1061 {
1062 fprintf (stderr, "*** Illegal input! ***\n");
1063 num = 3;
1064 }
1065 fprintf (stderr, "\nGUS16 DMA set to %d\n", num);
1066 printf ("#define GUS16_DMA %d\n", num);
1067 }
1068 }
1069
1070 if (selected_options & B (OPT_MPU401))
1071 {
1072 fprintf (stderr, "\nI/O base for MPU-401?\n"
1073 "The factory default is 330\n"
1074 "Enter the MPU-401 I/O base: ");
1075
1076 num = ask_value ("%x", 0x330);
1077 fprintf (stderr, "MPU-401 I/O base set to %03x\n", num);
1078 printf ("#define MPU_BASE 0x%03x\n", num);
1079
1080 fprintf (stderr, "\nIRQ number for MPU-401?\n"
1081 "Valid numbers are: 3, 4, 5, 7 and 9(=2).\n"
1082 "The default value is 9.\n"
1083 "Enter the value: ");
1084
1085 num = ask_value ("%d", 9);
1086 if (num == 6 || num < 3 || num > 15)
1087 {
1088
1089 fprintf (stderr, "*** Illegal input! ***\n");
1090 num = 5;
1091 }
1092 fprintf (stderr, "MPU-401 IRQ set to %d\n", num);
1093 printf ("#define MPU_IRQ %d\n", num);
1094 }
1095
1096 if (selected_options & B (OPT_MAUI))
1097 {
1098 fprintf (stderr, "\nI/O base for TB Maui (MIDI I/O of TB Tropez)?\n"
1099 "The factory default is 330\n"
1100 "Valid alternatives are 210, 230, 260, 290, 300, 320, 338 and 330\n"
1101 "Enter the Maui/Tropez MIDI I/O base: ");
1102
1103 num = ask_value ("%x", 0x330);
1104 fprintf (stderr, "Maui I/O base set to %03x\n", num);
1105 printf ("#define MAUI_BASE 0x%03x\n", num);
1106
1107 fprintf (stderr, "\nIRQ number for TB Maui (TB Tropez MIDI)?\n"
1108 "Valid numbers are: 5, 9, 12 and 15.\n"
1109 "The default value is 9.\n"
1110 "Enter the value: ");
1111
1112 num = ask_value ("%d", 9);
1113 if (num == 6 || num < 3 || num > 15)
1114 {
1115
1116 fprintf (stderr, "*** Illegal input! ***\n");
1117 num = 5;
1118 }
1119 fprintf (stderr, "Maui/Tropez MIDI IRQ set to %d\n", num);
1120 printf ("#define MAUI_IRQ %d\n", num);
1121 }
1122
1123 if (selected_options & B (OPT_UART6850))
1124 {
1125 fprintf (stderr, "\nI/O base for 6850 UART Midi?\n"
1126 "Be carefull. No defaults.\n"
1127 "Enter the 6850 UART I/O base: ");
1128
1129 num = ask_value ("%x", 0);
1130 if (num == 0)
1131 {
1132
1133
1134
1135 printf ("#define EXCLUDE_UART6850\n");
1136 }
1137 else
1138 {
1139 fprintf (stderr, "6850 UART I/O base set to %03x\n", num);
1140 printf ("#define U6850_BASE 0x%03x\n", num);
1141
1142 fprintf (stderr, "\nIRQ number for 6850 UART?\n"
1143 "Valid numbers are: 3, 4, 5, 7 and 9(=2).\n"
1144 "The default value is 5.\n"
1145 "Enter the value: ");
1146
1147 num = ask_value ("%d", 5);
1148 if (num == 6 || num < 3 || num > 15)
1149 {
1150
1151 fprintf (stderr, "*** Illegal input! ***\n");
1152 num = 5;
1153 }
1154 fprintf (stderr, "6850 UART IRQ set to %d\n", num);
1155 printf ("#define U6850_IRQ %d\n", num);
1156 }
1157 }
1158
1159 if (selected_options & B (OPT_PSS))
1160 {
1161 fprintf (stderr, "\nI/O base for PSS?\n"
1162 "The factory default is 220 (240 also possible)\n"
1163 "Enter the PSS I/O base: ");
1164
1165 num = ask_value ("%x", 0x220);
1166 fprintf (stderr, "PSS I/O base set to %03x\n", num);
1167 printf ("#define PSS_BASE 0x%03x\n", num);
1168
1169 #if YOU_WANT_TO_WASTE_RESOURCES
1170 fprintf (stderr, "\nIRQ number for PSS?\n"
1171 "Valid numbers are: 3, 4, 5, 7, 9(=2) or 10.\n"
1172 "The default value is 10.\n"
1173 "Enter the value: ");
1174
1175 num = ask_value ("%d", 10);
1176 if (num == 6 || num < 3 || num > 15)
1177 {
1178 fprintf (stderr, "*** Illegal input! ***\n");
1179 num = 7;
1180 }
1181 fprintf (stderr, "PSS IRQ set to %d\n", num);
1182 printf ("#define PSS_IRQ %d\n", num);
1183
1184 fprintf (stderr, "\nDMA number for ECHO-PSS?\n"
1185 "The default value is 5\n"
1186 "Valid values are 5, 6 and 7\n"
1187 "Enter the value: ");
1188
1189 num = ask_value ("%d", 5);
1190 if (num < 5 || num > 7)
1191 {
1192 fprintf (stderr, "*** Illegal input! ***\n");
1193 num = 5;
1194 }
1195 fprintf (stderr, "\nECHO-PSS DMA set to %d\n", num);
1196 printf ("#define PSS_DMA %d\n", num);
1197 #endif
1198
1199 fprintf (stderr, "\nMSS (MS Sound System) I/O base for the PSS card?\n"
1200 "The factory default is 530\n"
1201 "Other possible values are 604, E80 or F40\n"
1202 "Enter the MSS I/O base: ");
1203
1204 num = ask_value ("%x", 0x530);
1205 fprintf (stderr, "PSS/MSS I/O base set to %03x\n", num);
1206 printf ("#define PSS_MSS_BASE 0x%03x\n", num);
1207
1208 fprintf (stderr, "\nIRQ number for the MSS mode of PSS ?\n"
1209 "Valid numbers are: 7, 9(=2), 10 and 11.\n"
1210 "The default value is 11.\n"
1211 "Enter the value: ");
1212
1213 num = ask_value ("%d", 11);
1214 if (num == 6 || num < 3 || num > 15)
1215 {
1216 fprintf (stderr, "*** Illegal input! ***\n");
1217 num = 11;
1218 }
1219 fprintf (stderr, "PSS/MSS IRQ set to %d\n", num);
1220 printf ("#define PSS_MSS_IRQ %d\n", num);
1221
1222 fprintf (stderr, "\nMSS DMA number for PSS?\n"
1223 "Valid values are 0, 1 and 3.\n"
1224 "The default value is 3\n"
1225 "Enter the value: ");
1226
1227 num = ask_value ("%d", 3);
1228 if (num == 4 || num < 0 || num > 7)
1229 {
1230 fprintf (stderr, "*** Illegal input! ***\n");
1231 num = 3;
1232 }
1233 fprintf (stderr, "\nPSS/MSS DMA set to %d\n", num);
1234 printf ("#define PSS_MSS_DMA %d\n", num);
1235
1236 fprintf (stderr, "\nMIDI I/O base for PSS?\n"
1237 "The factory default is 330\n"
1238 "Enter the PSS MIDI I/O base: ");
1239
1240 num = ask_value ("%x", 0x330);
1241 fprintf (stderr, "PSS/MIDI I/O base set to %03x\n", num);
1242 printf ("#define PSS_MPU_BASE 0x%03x\n", num);
1243
1244 fprintf (stderr, "\nIRQ number for PSS MIDI?\n"
1245 "Valid numbers are: 3, 4, 5, 7 and 9(=2).\n"
1246 "The default value is 9.\n"
1247 "Enter the value: ");
1248
1249 num = ask_value ("%d", 9);
1250 if (num == 6 || num < 3 || num > 15)
1251 {
1252
1253 fprintf (stderr, "*** Illegal input! ***\n");
1254 num = 5;
1255 }
1256 fprintf (stderr, "PSS MIDI IRQ set to %d\n", num);
1257 printf ("#define PSS_MPU_IRQ %d\n", num);
1258 }
1259
1260 if (selected_options & B (OPT_MSS))
1261 {
1262 fprintf (stderr, "\nI/O base for MSS (MS Sound System)?\n"
1263 "The factory default is 530\n"
1264 "Other possible values are 604, E80 or F40\n"
1265 "Enter the MSS I/O base: ");
1266
1267 num = ask_value ("%x", 0x530);
1268 fprintf (stderr, "MSS I/O base set to %03x\n", num);
1269 printf ("#define MSS_BASE 0x%03x\n", num);
1270
1271 fprintf (stderr, "\nIRQ number for MSS?\n"
1272 "Valid numbers are: 7, 9(=2), 10 and 11.\n"
1273 "The default value is 10.\n"
1274 "Enter the value: ");
1275
1276 num = ask_value ("%d", 10);
1277 if (num == 6 || num < 3 || num > 15)
1278 {
1279 fprintf (stderr, "*** Illegal input! ***\n");
1280 num = 7;
1281 }
1282 fprintf (stderr, "MSS IRQ set to %d\n", num);
1283 printf ("#define MSS_IRQ %d\n", num);
1284
1285 fprintf (stderr, "\nDMA number for MSS?\n"
1286 "Valid values are 0, 1 and 3.\n"
1287 "The default value is 3\n"
1288 "Enter the value: ");
1289
1290 num = ask_value ("%d", 3);
1291 if (num == 4 || num < 0 || num > 7)
1292 {
1293 fprintf (stderr, "*** Illegal input! ***\n");
1294 num = 3;
1295 }
1296 fprintf (stderr, "\nMSS DMA set to %d\n", num);
1297 printf ("#define MSS_DMA %d\n", num);
1298 }
1299
1300 if (selected_options & B (OPT_SSCAPE))
1301 {
1302 int reveal_spea;
1303
1304 fprintf (stderr, "\n(MIDI) I/O base for Ensoniq Soundscape?\n"
1305 "The factory default is 330\n"
1306 "Other possible values are 320, 340 or 350\n"
1307 "Enter the Soundscape I/O base: ");
1308
1309 num = ask_value ("%x", 0x330);
1310 fprintf (stderr, "Soundscape I/O base set to %03x\n", num);
1311 printf ("#define SSCAPE_BASE 0x%03x\n", num);
1312
1313 fprintf (stderr, "Is your SoundScape card made/marketed by Reveal or Spea? ");
1314 reveal_spea = think_positively (0);
1315 if (reveal_spea)
1316 printf ("#define REVEAL_SPEA\n");
1317
1318 fprintf (stderr, "\nIRQ number for Soundscape?\n");
1319
1320 if (reveal_spea)
1321 fprintf (stderr, "Check valid interrupts from the manual of your card.\n");
1322 else
1323 fprintf (stderr, "Valid numbers are: 5, 7, 9(=2) and 10.\n");
1324
1325 fprintf (stderr, "The default value is 9.\n"
1326 "Enter the value: ");
1327
1328 num = ask_value ("%d", 9);
1329 if (num == 6 || num < 3 || num > 15)
1330 {
1331 fprintf (stderr, "*** Illegal input! ***\n");
1332 num = 9;
1333 }
1334 fprintf (stderr, "Soundscape IRQ set to %d\n", num);
1335 printf ("#define SSCAPE_IRQ %d\n", num);
1336
1337 fprintf (stderr, "\nDMA number for Soundscape?\n"
1338 "Valid values are 1 and 3 (sometimes 0)"
1339 "The default value is 3\n"
1340 "Enter the value: ");
1341
1342 num = ask_value ("%d", 3);
1343 if (num == 4 || num < 0 || num > 7)
1344 {
1345 fprintf (stderr, "*** Illegal input! ***\n");
1346 num = 3;
1347 }
1348 fprintf (stderr, "\nSoundscape DMA set to %d\n", num);
1349 printf ("#define SSCAPE_DMA %d\n", num);
1350
1351 fprintf (stderr, "\nMSS (MS Sound System) I/O base for the SSCAPE card?\n"
1352 "The factory default is 534\n"
1353 "Other possible values are 608, E84 or F44\n"
1354 "Enter the MSS I/O base: ");
1355
1356 num = ask_value ("%x", 0x534);
1357 fprintf (stderr, "SSCAPE/MSS I/O base set to %03x\n", num);
1358 printf ("#define SSCAPE_MSS_BASE 0x%03x\n", num);
1359
1360 fprintf (stderr, "\nIRQ number for the MSS mode of SSCAPE ?\n");
1361 if (reveal_spea)
1362 fprintf (stderr, "Valid numbers are: 5, 7, 9(=2) and 15.\n");
1363 else
1364 fprintf (stderr, "Valid numbers are: 5, 7, 9(=2) and 10.\n");
1365 fprintf (stderr, "The default value is 5.\n"
1366 "Enter the value: ");
1367
1368 num = ask_value ("%d", 5);
1369 if (num == 6 || num < 3 || num > 15)
1370 {
1371 fprintf (stderr, "*** Illegal input! ***\n");
1372 num = 10;
1373 }
1374 fprintf (stderr, "SSCAPE/MSS IRQ set to %d\n", num);
1375 printf ("#define SSCAPE_MSS_IRQ %d\n", num);
1376
1377 fprintf (stderr, "\nMSS DMA number for SSCAPE?\n"
1378 "Valid values are 0, 1 and 3.\n"
1379 "The default value is 3\n"
1380 "Enter the value: ");
1381
1382 num = ask_value ("%d", 3);
1383 if (num == 4 || num < 0 || num > 7)
1384 {
1385 fprintf (stderr, "*** Illegal input! ***\n");
1386 num = 3;
1387 }
1388 fprintf (stderr, "\nSSCAPE/MSS DMA set to %d\n", num);
1389 printf ("#define SSCAPE_MSS_DMA %d\n", num);
1390 }
1391 if (selected_options & B (OPT_TRIX))
1392 {
1393
1394 fprintf (stderr, "\nWindows Sound System I/O base for the AudioTriX card?\n"
1395 "The factory default is 530\n"
1396 "Other possible values are 604, E80 or F40\n"
1397 "Enter the MSS I/O base: ");
1398
1399 num = ask_value ("%x", 0x530);
1400 fprintf (stderr, "AudioTriX MSS I/O base set to %03x\n", num);
1401 printf ("#define TRIX_BASE 0x%03x\n", num);
1402
1403 fprintf (stderr, "\nIRQ number for the WSS mode of AudioTriX ?\n"
1404 "Valid numbers are: 5, 7, 9(=2), 10 and 11.\n"
1405 "The default value is 11.\n"
1406 "Enter the value: ");
1407
1408 num = ask_value ("%d", 11);
1409 if (num != 5 && num != 7 && num != 9 && num != 10 && num != 11)
1410 {
1411 fprintf (stderr, "*** Illegal input! ***\n");
1412 num = 11;
1413 }
1414 fprintf (stderr, " AudioTriX WSS IRQ set to %d\n", num);
1415 printf ("#define TRIX_IRQ %d\n", num);
1416
1417 fprintf (stderr, "\nWSS DMA number for AudioTriX?\n"
1418 "Valid values are 0, 1 and 3.\n"
1419 "The default value is 3\n"
1420 "Enter the value: ");
1421
1422 num = ask_value ("%d", 3);
1423 if (num != 0 && num != 1 && num != 3)
1424 {
1425 fprintf (stderr, "*** Illegal input! ***\n");
1426 num = 3;
1427 }
1428 fprintf (stderr, "\nAudioTriX/WSS DMA set to %d\n", num);
1429 printf ("#define TRIX_DMA %d\n", num);
1430
1431 fprintf (stderr, "\nSecond (capture) DMA number for AudioTriX?\n"
1432 "Valid values are 0, 1 and 3.\n"
1433 "The default value is 0\n"
1434 "(-1 disables the second DMA)\n"
1435 "Enter the value: ");
1436
1437 num = ask_value ("%d", 0);
1438 if (num != 0 && num != 1 && num != 3 || num != -1)
1439 {
1440 fprintf (stderr, "*** Illegal input! ***\n");
1441 num = 0;
1442 }
1443 fprintf (stderr, "\nAudioTriX/WSS DMA2 set to %d\n", num);
1444 printf ("#define TRIX_DMA2 %d\n", num);
1445
1446 fprintf (stderr, "\nSoundBlaster I/O address for the AudioTriX card?\n"
1447 "The factory default is 220\n"
1448 "Other possible values are 200, 210, 230, 240, 250, 260 and 270\n"
1449 "Enter the MSS I/O base: ");
1450
1451 num = ask_value ("%x", 0x220);
1452 fprintf (stderr, "AudioTriX SB I/O base set to %03x\n", num);
1453 printf ("#define TRIX_SB_BASE 0x%03x\n", num);
1454
1455 fprintf (stderr, "\nIRQ number for the SB mode of AudioTriX ?\n"
1456 "Valid numbers are: 3, 4, 5 and 7.\n"
1457 "The default value is 7.\n"
1458 "Enter the value: ");
1459
1460 num = ask_value ("%d", 7);
1461 if (num != 3 && num != 4 && num != 5 && num != 7)
1462 {
1463 fprintf (stderr, "*** Illegal input! ***\n");
1464 num = 7;
1465 }
1466 fprintf (stderr, " AudioTriX SB IRQ set to %d\n", num);
1467 printf ("#define TRIX_SB_IRQ %d\n", num);
1468
1469 fprintf (stderr, "\nSB DMA number for AudioTriX?\n"
1470 "Valid values are 1 and 3.\n"
1471 "The default value is 1\n"
1472 "Enter the value: ");
1473
1474 num = ask_value ("%d", 1);
1475 if (num != 1 && num != 3)
1476 {
1477 fprintf (stderr, "*** Illegal input! ***\n");
1478 num = 1;
1479 }
1480 fprintf (stderr, "\nAudioTriX/SB DMA set to %d\n", num);
1481 printf ("#define TRIX_SB_DMA %d\n", num);
1482
1483 fprintf (stderr, "\nMIDI (MPU-401) I/O address for the AudioTriX card?\n"
1484 "The factory default is 330\n"
1485 "Other possible values are 330, 370, 3B0 and 3F0\n"
1486 "Enter the MPU I/O base: ");
1487
1488 num = ask_value ("%x", 0x330);
1489 fprintf (stderr, "AudioTriX MIDI I/O base set to %03x\n", num);
1490 printf ("#define TRIX_MPU_BASE 0x%03x\n", num);
1491
1492 fprintf (stderr, "\nMIDI IRQ number for the AudioTriX ?\n"
1493 "Valid numbers are: 3, 4, 5, 7 and 9(=2).\n"
1494 "The default value is 5.\n"
1495 "Enter the value: ");
1496
1497 num = ask_value ("%d", 5);
1498 if (num != 3 && num != 4 && num != 5 && num != 7 && num != 9)
1499 {
1500 fprintf (stderr, "*** Illegal input! ***\n");
1501 num = 5;
1502 }
1503 fprintf (stderr, " AudioTriX MIDI IRQ set to %d\n", num);
1504 printf ("#define TRIX_MPU_IRQ %d\n", num);
1505 }
1506
1507 if (selected_options & B (OPT_CS4232))
1508 {
1509 int dma1;
1510
1511 fprintf (stderr, "\nWindows Sound System I/O base for CS4232?\n"
1512 "The factory default is 534\n"
1513 "Other possible values are 608, E84 or F44\n"
1514 "Enter the MSS I/O base: ");
1515
1516 num = ask_value ("%x", 0x534);
1517 fprintf (stderr, "CS4232 MSS I/O base set to %03x\n", num);
1518 printf ("#define CS4232_BASE 0x%03x\n", num);
1519
1520 fprintf (stderr, "\nIRQ number for the WSS mode of CS4232 ?\n"
1521 "Valid numbers are: 5, 7, 9(=2), 11, 12 or 15.\n"
1522 "The default value is 11.\n"
1523 "Enter the value: ");
1524
1525 num = ask_value ("%d", 11);
1526 if (num != 5 && num != 7 && num != 9 && num != 11 && num != 12 || num != 15)
1527 {
1528 fprintf (stderr, "*** Illegal input! ***\n");
1529 num = 11;
1530 }
1531 fprintf (stderr, " CS4232 WSS IRQ set to %d\n", num);
1532 printf ("#define CS4232_IRQ %d\n", num);
1533
1534 fprintf (stderr, "\nWSS DMA number for CS4232?\n"
1535 "Valid values are 0, 1 and 3.\n"
1536 "The default value is 0\n"
1537 "(select the lowes possible one if you want to\n"
1538 "use full duplex mode)\n"
1539 "Enter the value: ");
1540
1541 num = ask_value ("%d", 0);
1542 if (num != 0 && num != 1 && num != 3)
1543 {
1544 fprintf (stderr, "*** Illegal input! ***\n");
1545 num = 0;
1546 }
1547 fprintf (stderr, "\nCS4232/WSS DMA set to %d\n", num);
1548 printf ("#define CS4232_DMA %d\n", num);
1549 dma1 = num;
1550
1551 fprintf (stderr, "\n Second WSS DMA number for CS4232?\n"
1552 "Valid values are 0, 1 and 3.\n"
1553 "The default value is 3\n"
1554 "Enter the value (-1 disables duplex mode): ");
1555
1556 num = ask_value ("%d", 3);
1557 if (num == dma1 || (num != -1 && num != 0 && num != 1 && num != 3))
1558 {
1559 fprintf (stderr, "*** Illegal input! ***\n");
1560 num = 3;
1561 }
1562 fprintf (stderr, "\nCS4232/WSS DMA2 set to %d\n", num);
1563 printf ("#define CS4232_DMA2 %d\n", num);
1564
1565 fprintf (stderr, "\nMIDI (MPU-401) I/O address for the CS4232 card?\n"
1566 "The factory default is 330\n"
1567 "Other possible values are 330, 370, 3B0 and 3F0\n"
1568 "Enter the MPU I/O base: ");
1569
1570 num = ask_value ("%x", 0x330);
1571 fprintf (stderr, "CS4232 MIDI I/O base set to %03x\n", num);
1572 printf ("#define CS4232_MPU_BASE 0x%03x\n", num);
1573
1574 fprintf (stderr, "\nMIDI IRQ number for CS4232?\n"
1575 "Valid numbers are: 5, 7, 9(=2), 11, 12 or 15.\n"
1576 "The default value is 5.\n"
1577 "Enter the value: ");
1578
1579 num = ask_value ("%d", 5);
1580 if (num != 5 && num != 7 && num != 9 && num != 11 && num != 12 || num != 15)
1581 {
1582 fprintf (stderr, "*** Illegal input! ***\n");
1583 num = 5;
1584 }
1585 fprintf (stderr, " CS4232 MIDI IRQ set to %d\n", num);
1586 printf ("#define CS4232_MPU_IRQ %d\n", num);
1587 }
1588
1589 if (selected_options & B (OPT_MAD16))
1590 {
1591 fprintf (stderr, "\n*** Options for the MAD16 and Mozart based cards ***\n\n");
1592
1593 fprintf (stderr, "\nWindows Sound System I/O base for the MAD16/Mozart card?\n"
1594 "The factory default is 530\n"
1595 "Other possible values are 604, E80 or F40\n"
1596 "(Check which ones are supported by your card!!!!!!)\n"
1597 "Enter the MSS I/O base: ");
1598
1599 num = ask_value ("%x", 0x530);
1600 fprintf (stderr, "MAD16 MSS I/O base set to %03x\n", num);
1601 printf ("#define MAD16_BASE 0x%03x\n", num);
1602
1603 if ((sb_base == 0x220 && (num == 0x530 || num == 0x480)) ||
1604 (sb_base == 0x240 && (num == 0xf40 || num == 0x604)))
1605 {
1606 fprintf (stderr, "FATAL ERROR!!!!!!!!!!!!!!\n"
1607 "\tThis I/O port selection makes MAD16/Mozart\n"
1608 "\tto use 0x%03x as the SB port.\n"
1609 "\tThis conflicts with the true SB card.\n"
1610 "\tRun the config again and select another I/O base.\n",
1611 sb_base);
1612 printf ("#undef CONFIGURE_SOUNDCARD\n");
1613 printf ("#undef KERNEL_SOUNDCARD\n");
1614 exit (-1);
1615 }
1616
1617 fprintf (stderr, "\nIRQ number for the WSS mode of MAD16/Mozart ?\n"
1618 "Valid numbers are: 7, 9(=2), 10 and 11.\n"
1619 "The default value is 11.\n"
1620 "Enter the value: ");
1621
1622 num = ask_value ("%d", 11);
1623 if (num != 7 && num != 9 && num != 10 && num != 11)
1624 {
1625 fprintf (stderr, "*** Illegal input! ***\n");
1626 num = 11;
1627 }
1628 fprintf (stderr, " MAD16 WSS IRQ set to %d\n", num);
1629 printf ("#define MAD16_IRQ %d\n", num);
1630
1631 fprintf (stderr, "\nWSS DMA (playback) number for MAD16/Mozart?\n"
1632 "Valid values are 0, 1 and 3.\n"
1633 "The default value is 3\n"
1634 "Enter the value: ");
1635
1636 num = ask_value ("%d", 3);
1637 if (num != 0 && num != 1 && num != 3)
1638 {
1639 fprintf (stderr, "*** Illegal input! ***\n");
1640 num = 3;
1641 }
1642 fprintf (stderr, "\nMAD16/WSS DMA set to %d\n", num);
1643 printf ("#define MAD16_DMA %d\n", num);
1644
1645 num = (num == 0) ? 1 : 0;
1646
1647 fprintf (stderr, "\nMAD16/Mozart supports full duplex mode if the\n"
1648 "card has a suitable codec chip (CS423x or AD1845).\n"
1649 "This mode requires another DMA channel (DMA%d)\n"
1650 "Do you want to enable this mode? (n/y)", num);
1651
1652 if (think_positively (0))
1653 {
1654 fprintf (stderr, "\nMAD16/WSS capture DMA set to %d\n", num);
1655 printf ("#define MAD16_DMA2 %d\n", num);
1656 }
1657 else
1658 printf ("#define MAD16_DMA2 -1\n");
1659
1660
1661 fprintf (stderr, "\nMIDI (MPU-401/SB) I/O address for the MAD16 card?\n"
1662 "(This is the second MIDI port in TB Tropez)\n"
1663 "Other possible values are 330, 320, 310 and 300\n"
1664 "For 82C928 and Mozart you may use any nonzero value\n"
1665 "since the driver ignores this setting.\n"
1666 "The factory default is 330 (use 0 to disable)\n"
1667 "Enter the MIDI I/O base: ");
1668
1669 num = ask_value ("%x", 0x330);
1670 if (num == 0)
1671 fprintf (stderr, "MAD16/Mozart MIDI port disabled\n");
1672 else
1673 {
1674 fprintf (stderr, "MAD16 MIDI I/O base set to %03x\n", num);
1675 printf ("#define MAD16_MPU_BASE 0x%03x\n", num);
1676
1677 fprintf (stderr, "\nMIDI IRQ number for the MAD16 ?\n"
1678 "Valid numbers are: 5, 7, 9(=2) and 10.\n"
1679 "The default value is 5.\n"
1680 "Enter the value: ");
1681
1682 num = ask_value ("%d", 5);
1683 if (num != 3 && num != 4 && num != 5 && num != 7 && num != 9)
1684 {
1685 fprintf (stderr, "*** Illegal input! ***\n");
1686 num = 5;
1687 }
1688 fprintf (stderr, " MAD16 MIDI IRQ set to %d\n", num);
1689 printf ("#define MAD16_MPU_IRQ %d\n", num);
1690 }
1691 }
1692
1693 if (selected_options & B (OPT_AUDIO))
1694 {
1695 def_size = 65536;
1696
1697 fprintf (stderr, "\nSelect the DMA buffer size (4096, 16384, 32768 or 65536 bytes)\n"
1698 "%d is recommended value for this configuration.\n"
1699 "Enter the value: ", def_size);
1700
1701 num = ask_value ("%d", def_size);
1702 if (num != 4096 && num != 16384 && num != 32768 && num != 65536)
1703 {
1704
1705 fprintf (stderr, "*** Illegal input! ***\n");
1706 num = def_size;
1707 }
1708 fprintf (stderr, "The DMA buffer size set to %d\n", num);
1709 printf ("#define DSP_BUFFSIZE %d\n", num);
1710 }
1711
1712 printf ("#define SELECTED_SOUND_OPTIONS\t0x%08x\n", selected_options);
1713 fprintf (stderr, "The sound driver is now configured.\n");
1714
1715 #if defined(SCO) || defined(ISC) || defined(SYSV)
1716 fprintf (stderr, "Remember to update the System file\n");
1717 #endif
1718
1719 if (!old_config_used)
1720 {
1721 fprintf (stderr, "Save copy of this configuration to %s (y/n)", oldconf);
1722 if (think_positively (1))
1723 {
1724 char cmd[200];
1725
1726 sprintf (cmd, "cp local.h %s", oldconf);
1727
1728 fclose (stdout);
1729 if (system (cmd) != 0)
1730 perror (cmd);
1731 }
1732 }
1733 exit (0);
1734 }
1735
1736 int
1737 bin2hex (char *path, char *target, char *varname)
1738 {
1739 int fd;
1740 int count;
1741 char c;
1742 int i = 0;
1743
1744 if ((fd = open (path, 0)) > 0)
1745 {
1746 FILE *sf = fopen (target, "w");
1747
1748 fprintf (sf, "/* automaticaly generated by configure */\n");
1749 fprintf (sf, "static unsigned char %s[] = {\n", varname);
1750 while (1)
1751 {
1752 count = read (fd, &c, 1);
1753 if (count == 0)
1754 break;
1755 if (i != 0 && (i % 10) == 0)
1756 fprintf (sf, "\n");
1757 fprintf (sf, "0x%02x,", c & 0xFFL);
1758 i++;
1759 }
1760 fprintf (sf, "};\n"
1761 "#define %sLen %d\n", varname, i);
1762 fclose (sf);
1763 close (fd);
1764 return 1;
1765 }
1766
1767 return 0;
1768 }
![[first]](../icons/first.png){kind=icon}
![[previous]](../icons/n_left.png){kind=icon}
![[next]](../icons/n_right.png){kind=icon}
![[last]](../icons/last.png){kind=icon}
![[top]](../icons/n_top.png){kind=icon}
![[bottom]](../icons/bottom.png){kind=icon}
![[index]](../icons/index.png){kind=icon}
![[help]](../icons/help.png){kind=icon}
*/
![[next]](../icons/right.png)
![[first]](../icons/n_first.png)
![[top]](../icons/top.png)
![[previous]](../icons/left.png)
![[last]](../icons/n_last.png)
![[bottom]](../icons/n_bottom.png){kind=icon}