tag | line | file | source code |
HZ | 543 | arch/alpha/kernel/irq.c | for (delay = jiffies + HZ/10; delay > jiffies; ) |
HZ | 402 | arch/alpha/kernel/osf_sys.c | ticks = (ticks + (1000000 / HZ) - 1) / (1000000 / HZ); |
HZ | 403 | arch/alpha/kernel/osf_sys.c | ticks += tmp.tv_sec * HZ; |
HZ | 415 | arch/alpha/kernel/osf_sys.c | tmp.tv_sec = ticks / HZ; |
HZ | 416 | arch/alpha/kernel/osf_sys.c | tmp.tv_usec = ticks % HZ; |
HZ | 187 | arch/alpha/kernel/traps.c | if (cnt >= 5 && jiffies - last_time > 5*HZ) { |
HZ | 252 | arch/alpha/kernel/traps.c | if (cnt >= 5 && jiffies - last_time > 5*HZ) { |
HZ | 45 | arch/i386/kernel/process.c | #define HARD_IDLE_TIMEOUT (HZ / 3) |
HZ | 847 | arch/i386/kernel/smp.c | (((current->stime + current->utime) / HZ) >= current->rlim[RLIMIT_CPU].rlim_max)) |
HZ | 850 | arch/i386/kernel/smp.c | (((current->stime + current->utime) % HZ) == 0)) { |
HZ | 851 | arch/i386/kernel/smp.c | unsigned long psecs = (current->stime + current->utime) / HZ; |
HZ | 72 | arch/i386/kernel/time.c | "0" (time_low), "1" (1000000/HZ)); |
HZ | 79 | arch/i386/kernel/time.c | if (quotient >= 1000000/HZ) |
HZ | 80 | arch/i386/kernel/time.c | quotient = 1000000/HZ-1; |
HZ | 375 | arch/sparc/kernel/probe.c | SUN4C_TIMER_STRUCT->timer_limit10 = (((1000000/HZ) + 1) << 10); |
HZ | 420 | arch/sparc/kernel/probe.c | (((1000000/HZ) + 1) << 10); |
HZ | 287 | drivers/block/floppy.c | #define SEL_DLY (2*HZ/100) |
HZ | 312 | drivers/block/floppy.c | {{0, 500, 16, 16, 8000, 1*HZ, 3*HZ, 0, SEL_DLY, 5, 80, 3*HZ, 20, {3,1,2,0,2}, 0, |
HZ | 313 | drivers/block/floppy.c | 0, { 7, 4, 8, 2, 1, 5, 3,10}, 3*HZ/2, 0 }, "unknown" }, |
HZ | 315 | drivers/block/floppy.c | {{1, 300, 16, 16, 8000, 1*HZ, 3*HZ, 0, SEL_DLY, 5, 40, 3*HZ, 17, {3,1,2,0,2}, 0, |
HZ | 316 | drivers/block/floppy.c | 0, { 1, 0, 0, 0, 0, 0, 0, 0}, 3*HZ/2, 1 }, "360K PC" }, /*5 1/4 360 KB PC*/ |
HZ | 318 | drivers/block/floppy.c | {{2, 500, 16, 16, 6000, 4*HZ/10, 3*HZ, 14, SEL_DLY, 6, 83, 3*HZ, 17, {3,1,2,0,2}, 0, |
HZ | 319 | drivers/block/floppy.c | 0, { 2, 5, 6,23,10,20,11, 0}, 3*HZ/2, 2 }, "1.2M" }, /*5 1/4 HD AT*/ |
HZ | 321 | drivers/block/floppy.c | {{3, 250, 16, 16, 3000, 1*HZ, 3*HZ, 0, SEL_DLY, 5, 83, 3*HZ, 20, {3,1,2,0,2}, 0, |
HZ | 322 | drivers/block/floppy.c | 0, { 4,22,21,30, 3, 0, 0, 0}, 3*HZ/2, 4 }, "720k" }, /*3 1/2 DD*/ |
HZ | 324 | drivers/block/floppy.c | {{4, 500, 16, 16, 4000, 4*HZ/10, 3*HZ, 10, SEL_DLY, 5, 83, 3*HZ, 20, {3,1,2,0,2}, 0, |
HZ | 325 | drivers/block/floppy.c | 0, { 7, 4,25,22,31,21,29,11}, 3*HZ/2, 7 }, "1.44M" }, /*3 1/2 HD*/ |
HZ | 327 | drivers/block/floppy.c | {{5, 1000, 15, 8, 3000, 4*HZ/10, 3*HZ, 10, SEL_DLY, 5, 83, 3*HZ, 40, {3,1,2,0,2}, 0, |
HZ | 328 | drivers/block/floppy.c | 0, { 7, 8, 4,25,28,22,31,21}, 3*HZ/2, 8 }, "2.88M AMI BIOS" }, /*3 1/2 ED*/ |
HZ | 330 | drivers/block/floppy.c | {{6, 1000, 15, 8, 3000, 4*HZ/10, 3*HZ, 10, SEL_DLY, 5, 83, 3*HZ, 40, {3,1,2,0,2}, 0, |
HZ | 331 | drivers/block/floppy.c | 0, { 7, 8, 4,25,28,22,31,21}, 3*HZ/2, 8 }, "2.88M" } /*3 1/2 ED*/ |
HZ | 581 | drivers/block/floppy.c | fd_timeout.expires = jiffies + 20*HZ; |
HZ | 859 | drivers/block/floppy.c | delta = jiffies - UDRS->first_read_date + HZ - |
HZ | 861 | drivers/block/floppy.c | delta = ((delta * UDP->rps) % HZ) / UDP->rps; |
HZ | 912 | drivers/block/floppy.c | fd_timer.expires = jiffies + HZ / 10; |
HZ | 1235 | drivers/block/floppy.c | return(wait_for_completion(jiffies+2*HZ/100, |
HZ | 3728 | drivers/block/floppy.c | default_drive_params[i].params.select_delay = 2*HZ/100; |
HZ | 1388 | drivers/block/ide-cd.c | cdrom_sleep (HZ); |
HZ | 1282 | drivers/block/ide-tape.c | tape->best_dsc_rw_frequency=(unsigned long) (0.5*nr_units*service_time*HZ); |
HZ | 1284 | drivers/block/ide-tape.c | tape->best_dsc_rw_frequency=(unsigned long) (service_time*HZ); |
HZ | 226 | drivers/block/ide-tape.h | #define IDETAPE_DSC_READ_WRITE_FALLBACK_FREQUENCY 5*HZ/100 /* 50 msec */ |
HZ | 227 | drivers/block/ide-tape.h | #define IDETAPE_DSC_READ_WRITE_LOWEST_FREQUENCY 30*HZ/100 /* 300 msec */ |
HZ | 228 | drivers/block/ide-tape.h | #define IDETAPE_DSC_FAST_MEDIA_ACCESS_FREQUENCY 1*HZ /* 1 second */ |
HZ | 229 | drivers/block/ide-tape.h | #define IDETAPE_FAST_SLOW_THRESHOLD 5*60*HZ /* 5 minutes */ |
HZ | 230 | drivers/block/ide-tape.h | #define IDETAPE_DSC_SLOW_MEDIA_ACCESS_FREQUENCY 60*HZ /* 1 minute */ |
HZ | 231 | drivers/block/ide-tape.h | #define IDETAPE_DSC_TIMEOUT 2*60*60*HZ /* 2 hours */ |
HZ | 615 | drivers/block/ide.c | ide_set_handler (drive, &atapi_reset_pollfunc, HZ/20); |
HZ | 640 | drivers/block/ide.c | ide_set_handler (drive, &reset_pollfunc, HZ/20); |
HZ | 706 | drivers/block/ide.c | ide_set_handler (drive, &atapi_reset_pollfunc, HZ/20); |
HZ | 745 | drivers/block/ide.c | ide_set_handler (drive, &reset_pollfunc, HZ/20); |
HZ | 2224 | drivers/block/ide.c | unsigned long timer = jiffies + (HZ + 99)/100 + 1; |
HZ | 149 | drivers/block/ide.h | #define WAIT_DRQ (5*HZ/100) /* 50msec - spec allows up to 20ms */ |
HZ | 150 | drivers/block/ide.h | #define WAIT_READY (3*HZ/100) /* 30msec - should be instantaneous */ |
HZ | 151 | drivers/block/ide.h | #define WAIT_PIDENTIFY (1*HZ) /* 1sec - should be less than 3ms (?) */ |
HZ | 152 | drivers/block/ide.h | #define WAIT_WORSTCASE (30*HZ) /* 30sec - worst case when spinning up */ |
HZ | 153 | drivers/block/ide.h | #define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */ |
HZ | 347 | drivers/cdrom/aztcd.c | SET_TIMER(aztStatTimer, HZ/100); |
HZ | 364 | drivers/cdrom/aztcd.c | SET_TIMER(aztStatTimer, HZ/100); |
HZ | 1025 | drivers/cdrom/aztcd.c | SET_TIMER(azt_poll, HZ/100); |
HZ | 1438 | drivers/cdrom/aztcd.c | SET_TIMER(azt_poll, HZ/100); |
HZ | 638 | drivers/cdrom/cdu31a.c | current->timeout = jiffies + 2*HZ; |
HZ | 897 | drivers/cdrom/cdu31a.c | current->timeout = jiffies + HZ/10; /* Wait .1 seconds on retries */ |
HZ | 1697 | drivers/cdrom/cdu31a.c | cdu31a_abort_timer.expires = jiffies + 2*HZ; /* Wait 2 seconds */ |
HZ | 120 | drivers/cdrom/cm206.c | #define DATA_TIMEOUT (3*HZ) /* measured in jiffies (10 ms) */ |
HZ | 121 | drivers/cdrom/cm206.c | #define UART_TIMEOUT (5*HZ/100) |
HZ | 122 | drivers/cdrom/cm206.c | #define DSB_TIMEOUT (7*HZ) /* time for the slowest command to finish */ |
HZ | 66 | drivers/cdrom/mcdx.c | #ifndef HZ |
HZ | 1188 | drivers/cdrom/mcdx.c | mcdx_delay(stuffp, HZ/2); |
HZ | 1252 | drivers/cdrom/mcdx.c | current->timeout = jiffies + 5*HZ; |
HZ | 1510 | drivers/cdrom/mcdx.c | if (-1 == mcdx_getval(stuffp, 3*HZ, 0, NULL)) { |
HZ | 1553 | drivers/cdrom/mcdx.c | return mcdx_talk(stuffp, "\xf8", 1, NULL, 1, 5*HZ, tries); |
HZ | 1560 | drivers/cdrom/mcdx.c | { return mcdx_talk(stuffp, "\xf0", 1, NULL, 1, 2*HZ, tries); } |
HZ | 1564 | drivers/cdrom/mcdx.c | { return mcdx_talk(stuffp, "\x70", 1, NULL, 1, 2*HZ, tries); } |
HZ | 1571 | drivers/cdrom/mcdx.c | return mcdx_talk(stuffp, "\xf6", 1, NULL, 1, 5*HZ, tries); |
HZ | 1585 | drivers/cdrom/mcdx.c | 2*HZ, tries))) |
HZ | 1607 | drivers/cdrom/mcdx.c | ans = mcdx_talk(stuffp, "\x11", 1, buf, sizeof(buf), 2*HZ, tries); |
HZ | 1624 | drivers/cdrom/mcdx.c | ans = mcdx_talk(stuffp, "\x10", 1, buf, sizeof(buf), 2*HZ, tries); |
HZ | 1644 | drivers/cdrom/mcdx.c | if (-1 == (ans = mcdx_talk(stuffp, "\xc2", 1, cmd, sizeof(cmd), 5*HZ, tries))) |
HZ | 1655 | drivers/cdrom/mcdx.c | return mcdx_talk(stuffp, cmd, 2, NULL, 1, 5*HZ, tries); |
HZ | 1670 | drivers/cdrom/mcdx.c | return mcdx_talk(stuffp, cmd, 2, NULL, 1, 5*HZ, tries); |
HZ | 1685 | drivers/cdrom/mcdx.c | if (-1 == mcdx_talk(stuffp, cmd, 3, NULL, 1, 1*HZ, tries)) |
HZ | 1691 | drivers/cdrom/mcdx.c | return mcdx_talk(stuffp, cmd, 3, NULL, 1, 1*HZ, tries); |
HZ | 1700 | drivers/cdrom/mcdx.c | if (-1 == (ans = mcdx_talk(stuffp, "\xdc", 1, buf, sizeof(buf), 2*HZ, tries))) |
HZ | 1716 | drivers/cdrom/mcdx.c | } else return mcdx_talk(stuffp, "\x60", 1, NULL, 1, 5*HZ, tries); |
HZ | 1725 | drivers/cdrom/mcdx.c | return mcdx_talk(stuffp, cmd, sizeof(cmd), NULL, 1, 5*HZ, tries); |
HZ | 1732 | drivers/cdrom/mcdx.c | { return mcdx_talk(stuffp, "\x40", 1, NULL, 1, 5*HZ, tries); } |
HZ | 919 | drivers/cdrom/sbpcd.c | sbp_sleep(15*HZ/10); |
HZ | 927 | drivers/cdrom/sbpcd.c | for(timeout = jiffies + 10*HZ, i=maxtim_data; timeout > jiffies; ) |
HZ | 979 | drivers/cdrom/sbpcd.c | for (i=0,timeout=jiffies+HZ;i<response_count;i++) |
HZ | 1114 | drivers/cdrom/sbpcd.c | else if (flags_cmd_out & f_respo2) timeout = jiffies + 16*HZ; |
HZ | 1115 | drivers/cdrom/sbpcd.c | else timeout = jiffies + 4*HZ; |
HZ | 1234 | drivers/cdrom/sbpcd.c | if (drvcmd[0]==CMDT_READ_VER) sbp_sleep(HZ); |
HZ | 1309 | drivers/cdrom/sbpcd.c | sbp_sleep(HZ/10); |
HZ | 1823 | drivers/cdrom/sbpcd.c | if (fam0LV_drive) sbp_sleep(5*HZ); /* wait 5 seconds */ |
HZ | 1824 | drivers/cdrom/sbpcd.c | else sbp_sleep(1*HZ); /* wait a second */ |
HZ | 1829 | drivers/cdrom/sbpcd.c | sbp_sleep(3*HZ); |
HZ | 2912 | drivers/cdrom/sbpcd.c | delay_timer.expires=jiffies+11*HZ/10; |
HZ | 3091 | drivers/cdrom/sbpcd.c | sbp_sleep(6*HZ); |
HZ | 3147 | drivers/cdrom/sbpcd.c | sbp_sleep(5*HZ/10); |
HZ | 4136 | drivers/cdrom/sbpcd.c | while (busy_data) sbp_sleep(HZ/10); /* wait a bit */ |
HZ | 4199 | drivers/cdrom/sbpcd.c | for (timeout=jiffies+9*HZ; ; ) |
HZ | 4249 | drivers/cdrom/sbpcd.c | for (timeout=jiffies+9*HZ; timeout > jiffies; timeout--) |
HZ | 4386 | drivers/cdrom/sbpcd.c | while (busy_audio) sbp_sleep(HZ); /* wait a bit */ |
HZ | 4584 | drivers/cdrom/sbpcd.c | max_latency=9*HZ; |
HZ | 4586 | drivers/cdrom/sbpcd.c | if (D_S[d].f_multisession) max_latency=9*HZ; |
HZ | 4587 | drivers/cdrom/sbpcd.c | else max_latency=3*HZ; |
HZ | 4763 | drivers/cdrom/sbpcd.c | for (timeout=jiffies+HZ; timeout > jiffies; timeout--) |
HZ | 5182 | drivers/cdrom/sbpcd.c | sbp_sleep(HZ); |
HZ | 5223 | drivers/cdrom/sbpcd.c | timeout=jiffies+2*HZ; |
HZ | 1353 | drivers/cdrom/sjcd.c | SJCD_SET_TIMER( sjcd_poll, HZ/100 ); |
HZ | 1524 | drivers/cdrom/sonycd535.c | retry_count = jiffies + 2 * HZ; |
HZ | 135 | drivers/char/apm_bios.c | #define APM_CHECK_TIMEOUT (HZ) |
HZ | 175 | drivers/char/console.c | static int blankinterval = 10*60*HZ; |
HZ | 1134 | drivers/char/console.c | blankinterval = ((par[1] < 60) ? par[1] : 60) * 60 * HZ; |
HZ | 1147 | drivers/char/console.c | par[1]*HZ/1000 : 0; |
HZ | 1149 | drivers/char/console.c | bell_duration = HZ/8; |
HZ | 1159 | drivers/char/console.c | vesa_off_interval = ((par[1] < 60) ? par[1] : 60) * 60 * HZ; |
HZ | 1322 | drivers/char/console.c | bell_duration = HZ/8; |
HZ | 846 | drivers/char/cyclades.c | base_addr[CyTDR<<index] = info->x_break*200/HZ; |
HZ | 1399 | drivers/char/cyclades.c | info->timeout = (info->xmit_fifo_size*HZ*30/269) + 2; |
HZ | 1402 | drivers/char/cyclades.c | info->timeout = (info->xmit_fifo_size*HZ*15/baud_table[i]) + 2; |
HZ | 2212 | drivers/char/cyclades.c | send_break(info, HZ/4); /* 1/4 second */ |
HZ | 2219 | drivers/char/cyclades.c | send_break(info, arg ? arg*(HZ/10) : HZ/4); |
HZ | 2774 | drivers/char/istallion.c | portp->closing_wait = 30 * HZ; |
HZ | 406 | drivers/char/lp.c | LP_TIME(minor) = arg * HZ/100; |
HZ | 325 | drivers/char/n_tty.c | if (tty->overrun_time < (jiffies - HZ)) { |
HZ | 790 | drivers/char/n_tty.c | time = (HZ / 10) * TIME_CHAR(tty); |
HZ | 553 | drivers/char/psaux.c | current->timeout = jiffies + (5*HZ + 99) / 100; |
HZ | 588 | drivers/char/psaux.c | current->timeout = jiffies + (5*HZ + 99) / 100; |
HZ | 1519 | drivers/char/scc.c | scc->tx_t.expires = jiffies + HZ/TPS; |
HZ | 1533 | drivers/char/scc.c | scc->rx_t.expires = jiffies + HZ/TPS; |
HZ | 1546 | drivers/char/scc.c | scc->rx_t.expires = jiffies + HZ/TPS; |
HZ | 1573 | drivers/char/scc.c | scc->tx_t.expires = jiffies + HZ/TPS; |
HZ | 2595 | drivers/char/scc.c | scc->rx_t.expires = jiffies + HZ/TPS; |
HZ | 76 | drivers/char/serial.c | #define RS_STROBE_TIME (10*HZ) |
HZ | 867 | drivers/char/serial.c | int timeout = 60*HZ; /* 60 seconds === a long time :-) */ |
HZ | 871 | drivers/char/serial.c | IRQ_timeout[irq] = 60*HZ; |
HZ | 1034 | drivers/char/serial.c | timer_table[RS_TIMER].expires = jiffies + 2*HZ/100; |
HZ | 1156 | drivers/char/serial.c | info->timeout = ((info->xmit_fifo_size*HZ*15*quot) / |
HZ | 1160 | drivers/char/serial.c | info->timeout = (info->xmit_fifo_size*HZ*30/269) + 2; |
HZ | 1163 | drivers/char/serial.c | info->timeout = (info->xmit_fifo_size*HZ*15/baud_table[i]) + 2; |
HZ | 1539 | drivers/char/serial.c | info->close_delay = new_serial.close_delay * HZ/100; |
HZ | 1540 | drivers/char/serial.c | info->closing_wait = new_serial.closing_wait * HZ/100; |
HZ | 1723 | drivers/char/serial.c | timeout = jiffies+HZ/10; |
HZ | 1729 | drivers/char/serial.c | timeout = jiffies+HZ/10; |
HZ | 1884 | drivers/char/serial.c | send_break(info, HZ/4); /* 1/4 second */ |
HZ | 1891 | drivers/char/serial.c | send_break(info, arg ? arg*(HZ/10) : HZ/4); |
HZ | 2136 | drivers/char/serial.c | timeout = jiffies+HZ; |
HZ | 2458 | drivers/char/serial.c | timeout = jiffies+2*HZ/100; |
HZ | 2720 | drivers/char/serial.c | info->close_delay = 5*HZ/10; |
HZ | 2721 | drivers/char/serial.c | info->closing_wait = 30*HZ; |
HZ | 28 | drivers/char/softdog.c | #define TIMER_MARGIN (60*HZ) /* Allow 1 minute */ |
HZ | 2464 | drivers/char/stallion.c | portp->closing_wait = 30 * HZ; |
HZ | 760 | drivers/char/tpqic02.c | current->timeout = jiffies + 3*HZ/10; /* nap 0.30 sec between checks, */ |
HZ | 1461 | drivers/char/tpqic02.c | while (jiffies - t < 4*HZ) |
HZ | 1873 | drivers/char/tpqic02.c | timer_table[QIC02_TAPE_TIMER].expires = jiffies + 6*HZ; |
HZ | 221 | drivers/char/vt.c | unsigned int ticks = HZ * ((arg >> 16) & 0xffff) / 1000; |
HZ | 499 | drivers/net/3c503.c | if (jiffies - fifo_watchdog > 2*HZ/100) { |
HZ | 542 | drivers/net/8390.c | if (jiffies - reset_start_time > 2*HZ/100) { |
HZ | 77 | drivers/net/8390.h | #define TX_TIMEOUT (20*HZ/100) |
HZ | 1894 | drivers/net/arcnet.c | jiffies-lp->last_recon > HZ*10) |
HZ | 1910 | drivers/net/arcnet.c | (lp->last_recon-lp->first_recon)/HZ, |
HZ | 1921 | drivers/net/arcnet.c | && (lp->last_recon-lp->first_recon)<=HZ*60 |
HZ | 1928 | drivers/net/arcnet.c | && lp->last_recon-lp->first_recon > HZ*60) |
HZ | 1940 | drivers/net/arcnet.c | else if (lp->network_down && jiffies-lp->last_recon > HZ*10) |
HZ | 118 | drivers/net/atp.c | #define TIMED_CHECKER (HZ/4) |
HZ | 209 | drivers/net/de4x5.c | #define QUEUE_PKT_TIMEOUT (3*HZ) /* 3 second timeout */ |
HZ | 912 | drivers/net/de4x5.c | for (j=0, i=jiffies;(i<=jiffies+HZ/100) && (j==0);) { |
HZ | 788 | drivers/net/depca.c | if (tickssofar < 1*HZ) { |
HZ | 600 | drivers/net/hp100.c | if ( jiffies - dev -> trans_start < 2 * HZ ) return -EAGAIN; |
HZ | 1054 | drivers/net/hp100.c | time = jiffies + ( HZ / 2 ); |
HZ | 1083 | drivers/net/hp100.c | time = jiffies + ( HZ / 2 ); |
HZ | 196 | drivers/net/ne.c | if (jiffies - reset_start_time > 2*HZ/100) { |
HZ | 399 | drivers/net/ne.c | if (jiffies - reset_start_time > 2*HZ/100) { |
HZ | 597 | drivers/net/ne.c | if (jiffies - dma_start > 2*HZ/100) { /* 20ms */ |
HZ | 47 | drivers/net/ppp.c | #define OPTIMIZE_FLAG_TIME ((HZ * 3)/2) |
HZ | 2511 | drivers/net/ppp.c | cur_ddinfo.xmit_idle = (cur_jiffies - ppp->ddinfo.xmit_idle) / HZ; |
HZ | 2512 | drivers/net/ppp.c | cur_ddinfo.recv_idle = (cur_jiffies - ppp->ddinfo.recv_idle) / HZ; |
HZ | 250 | drivers/net/seeq8005.c | j=jiffies+HZ; |
HZ | 254 | drivers/net/seeq8005.c | while ( ((inw(SEEQ_STATUS) & SEEQSTAT_WINDOW_INT) != SEEQSTAT_WINDOW_INT) && jiffies < j+HZ) |
HZ | 723 | drivers/net/seeq8005.c | while ( (((status=inw(SEEQ_STATUS)) & SEEQSTAT_FIFO_EMPTY) == 0) && (jiffies < tmp + HZ)) |
HZ | 744 | drivers/net/seeq8005.c | tmp = jiffies + HZ; |
HZ | 501 | drivers/net/slip.c | if (jiffies - dev->trans_start < 20 * HZ) { |
HZ | 1852 | drivers/scsi/53c7,8xx.c | timeout = jiffies + 5 * HZ / 10; |
HZ | 1936 | drivers/scsi/53c7,8xx.c | timeout = jiffies + 5 * HZ; /* arbitrary */ |
HZ | 2149 | drivers/scsi/BusLogic.c | else if (CurrentTime - HostAdapter->LastSequencePoint[TargetID] > 2*HZ) |
HZ | 958 | drivers/scsi/BusLogic.h | unsigned long TimeoutJiffies = jiffies + Seconds * HZ; |
HZ | 1429 | drivers/scsi/aic7xxx.c | i = jiffies + (seconds * HZ); /* compute time to stop */ |
HZ | 647 | drivers/scsi/eata_dma.c | while (jiffies < (time + (3 * HZ)) || limit++ < 10000000) |
HZ | 736 | drivers/scsi/eata_dma.c | i = jiffies + (3 * HZ); |
HZ | 753 | drivers/scsi/eata_dma.c | while (jiffies < (i + (3 * HZ)) && limit++ < 10000000) |
HZ | 192 | drivers/scsi/eata_dma_proc.c | eata_scsi_done, 1 * HZ, 1); |
HZ | 320 | drivers/scsi/eata_dma_proc.c | eata_scsi_done, 1 * HZ, 1); |
HZ | 96 | drivers/scsi/eata_generic.h | #define DELAY(x) { __u32 i; i = jiffies + (x * HZ); while (jiffies < i) barrier(); } |
HZ | 499 | drivers/scsi/eata_pio.c | while (jiffies < (time + (3 * HZ)) && limit++ < 10000000); |
HZ | 178 | drivers/scsi/scsi.c | #define SCSI_TIMEOUT (5*HZ) |
HZ | 180 | drivers/scsi/scsi.c | #define SCSI_TIMEOUT (1*HZ) |
HZ | 188 | drivers/scsi/scsi.c | #define SENSE_TIMEOUT (5*HZ/10) |
HZ | 189 | drivers/scsi/scsi.c | #define RESET_TIMEOUT (5*HZ/10) |
HZ | 190 | drivers/scsi/scsi.c | #define ABORT_TIMEOUT (5*HZ/10) |
HZ | 193 | drivers/scsi/scsi.c | #define MIN_RESET_DELAY (1*HZ) |
HZ | 196 | drivers/scsi/scsi.c | #define MIN_RESET_PERIOD (10*HZ) |
HZ | 547 | drivers/scsi/scsi.c | 256, scan_scsis_done, SCSI_TIMEOUT + 4 * HZ, 5); |
HZ | 1174 | drivers/scsi/scsi.c | clock = jiffies + 4 * HZ; |
HZ | 59 | drivers/scsi/sd.c | #define SD_TIMEOUT (7 * HZ) |
HZ | 60 | drivers/scsi/sd.c | #define SD_MOD_TIMEOUT (8 * HZ) |
HZ | 1034 | drivers/scsi/sd.c | while(jiffies < time1 + HZ); /* Wait 1 second for next try */ |
HZ | 1037 | drivers/scsi/sd.c | } while(the_result && spintime && spintime+100*HZ > jiffies); |
HZ | 30 | drivers/scsi/sg.h | #define SG_DEFAULT_TIMEOUT (60*HZ) /* 1 minute timeout */ |
HZ | 42 | drivers/scsi/sr.c | #define SR_TIMEOUT (150 * HZ) |
HZ | 74 | drivers/scsi/st.c | #define ST_TIMEOUT (900 * HZ) |
HZ | 75 | drivers/scsi/st.c | #define ST_LONG_TIMEOUT (2000 * HZ) |
HZ | 345 | drivers/sound/dmabuf.c | if (10 * HZ) |
HZ | 346 | drivers/sound/dmabuf.c | current->timeout = tl = jiffies + (10 * HZ); |
HZ | 382 | drivers/sound/dmabuf.c | if (HZ) |
HZ | 383 | drivers/sound/dmabuf.c | current->timeout = tl = jiffies + (HZ); |
HZ | 516 | drivers/sound/dmabuf.c | timeout = 2 * HZ; |
HZ | 979 | drivers/sound/dmabuf.c | timeout = 2 * HZ; |
HZ | 1736 | drivers/sound/gus_wave.c | if (HZ) |
HZ | 1737 | drivers/sound/gus_wave.c | current->timeout = tl = jiffies + (HZ); |
HZ | 60 | drivers/sound/mad16_sb_midi.c | limit = jiffies + HZ / 10; /* |
HZ | 115 | drivers/sound/midibuf.c | if (HZ / 10) |
HZ | 116 | drivers/sound/midibuf.c | current->timeout = tl = jiffies + (HZ / 10); |
HZ | 493 | drivers/sound/midibuf.c | val = (HZ * val) / 10; |
HZ | 135 | drivers/sound/sb_dsp.c | limit = jiffies + HZ / 10; /* |
HZ | 1284 | drivers/sound/sequencer.c | if (HZ / 10) |
HZ | 1285 | drivers/sound/sequencer.c | current->timeout = tl = jiffies + (HZ / 10); |
HZ | 1419 | drivers/sound/sequencer.c | n = 3 * HZ; /* Timeout */ |
HZ | 1683 | drivers/sound/sequencer.c | return snd_ioctl_return ((int *) arg, HZ); |
HZ | 1897 | drivers/sound/sequencer.c | val = (HZ * val) / 10; |
HZ | 117 | drivers/sound/sound_timer.c | curr_timebase = HZ; |
HZ | 566 | drivers/sound/sscape.c | timeout_val = 5 * HZ; |
HZ | 599 | drivers/sound/sscape.c | timeout_val = 5 * HZ; |
HZ | 60 | drivers/sound/sys_timer.c | return ((tmr_value * curr_tempo * curr_timebase) + (30 * HZ)) / (60 * HZ); |
HZ | 113 | drivers/sound/sys_timer.c | curr_timebase = HZ; |
HZ | 101 | fs/buffer.c | } bdf_prm = {{25, 500, 64, 256, 15, 30*HZ, 5*HZ, 1884, 2}}; |
HZ | 281 | fs/ncpfs/sock.c | max_timeout = NCP_MAX_RPC_TIMEOUT*HZ/10; |
HZ | 77 | fs/nfs/file.c | #define EXPIRE_CACHE (HZ * 3) /* keep no longer than 3 seconds */ |
HZ | 128 | fs/nfs/inode.c | server->timeo = data->timeo*HZ/10; |
HZ | 130 | fs/nfs/inode.c | server->acregmin = data->acregmin*HZ; |
HZ | 131 | fs/nfs/inode.c | server->acregmax = data->acregmax*HZ; |
HZ | 132 | fs/nfs/inode.c | server->acdirmin = data->acdirmin*HZ; |
HZ | 133 | fs/nfs/inode.c | server->acdirmax = data->acdirmax*HZ; |
HZ | 335 | fs/nfs/nfsroot.c | timeout = jiffies + (RARP_TIMEOUT * HZ); |
HZ | 798 | fs/nfs/nfsroot.c | 3 * HZ, 60 * HZ, 30 * HZ, 60 * HZ, "\0" |
HZ | 814 | fs/nfs/nfsroot.c | s.timeo = nfs_data.timeo * HZ / 10; |
HZ | 36 | fs/nfs/rpcsock.c | #define msleep(sec) { current->timeout = sec * HZ / 1000; \ |
HZ | 400 | fs/nfs/rpcsock.c | if (t0 && t0 - jiffies > 60 * HZ) { |
HZ | 59 | fs/nfs/sock.c | timeout.max_timeout = maxtimeo = NFS_MAX_RPC_TIMEOUT*HZ/10; |
HZ | 238 | fs/proc/array.c | xtime.tv_sec - jiffies / HZ); |
HZ | 260 | fs/proc/array.c | #if HZ!=100 |
HZ | 262 | fs/proc/array.c | uptime / HZ, |
HZ | 263 | fs/proc/array.c | (((uptime % HZ) * 100) / HZ) % 100, |
HZ | 264 | fs/proc/array.c | idle / HZ, |
HZ | 265 | fs/proc/array.c | (((idle % HZ) * 100) / HZ) % 100); |
HZ | 268 | fs/proc/array.c | uptime / HZ, |
HZ | 269 | fs/proc/array.c | uptime % HZ, |
HZ | 270 | fs/proc/array.c | idle / HZ, |
HZ | 271 | fs/proc/array.c | idle % HZ); |
HZ | 230 | fs/select.c | timeout = ROUND_UP(get_user(&tvp->tv_usec),(1000000/HZ)); |
HZ | 231 | fs/select.c | timeout += get_user(&tvp->tv_sec) * (unsigned long) HZ; |
HZ | 242 | fs/select.c | put_user(timeout/HZ, &tvp->tv_sec); |
HZ | 243 | fs/select.c | timeout %= HZ; |
HZ | 244 | fs/select.c | timeout *= (1000000/HZ); |
HZ | 6 | include/asm-alpha/param.h | #ifndef HZ |
HZ | 4 | include/asm-i386/param.h | #ifndef HZ |
HZ | 4 | include/asm-mips/param.h | #ifndef HZ |
HZ | 4 | include/asm-ppc/param.h | #ifndef HZ |
HZ | 5 | include/asm-sparc/param.h | #ifndef HZ |
HZ | 130 | include/linux/atalk.h | #define AARP_EXPIRY_TIME (5*60*HZ) /* Not specified - how long till we drop a resolved entry */ |
HZ | 132 | include/linux/atalk.h | #define AARP_TICK_TIME (HZ/5) /* Fast retransmission timer when resolving */ |
HZ | 134 | include/linux/atalk.h | #define AARP_RESOLVE_TIME (10*HZ) /* Some value bigger than total retransmit time + a bit for last reply to appear and to stop continual requests */ |
HZ | 135 | include/linux/blk.h | #define TIMEOUT_VALUE (6*HZ) |
HZ | 145 | include/linux/blk.h | #define TIMEOUT_VALUE (2*HZ) |
HZ | 69 | include/linux/cdu31a.h | #define SONY_DETECT_TIMEOUT (8*HZ/10) /* Maximum amount of time |
HZ | 193 | include/linux/ip_fw.h | #define MASQUERADE_EXPIRE_TCP 15*60*HZ |
HZ | 194 | include/linux/ip_fw.h | #define MASQUERADE_EXPIRE_TCP_FIN 2*60*HZ |
HZ | 195 | include/linux/ip_fw.h | #define MASQUERADE_EXPIRE_UDP 5*60*HZ |
HZ | 78 | include/linux/lp.h | #define LP_TIMEOUT_INTERRUPT (60 * HZ) |
HZ | 79 | include/linux/lp.h | #define LP_TIMEOUT_POLLED (10 * HZ) |
HZ | 167 | include/linux/mcdx.h | #define MCDX_DATA_TIMEOUT (HZ/10) /* 0.1 second */ |
HZ | 33 | include/linux/nfs_fs.h | #define NFS_MAX_RPC_TIMEOUT (6*HZ) |
HZ | 50 | include/linux/sched.h | #define LOAD_FREQ (5*HZ) /* 5 sec intervals */ |
HZ | 60 | include/linux/sched.h | #define CT_TO_SECS(x) ((x) / HZ) |
HZ | 61 | include/linux/sched.h | #define CT_TO_USECS(x) (((x) % HZ) * 1000000/HZ) |
HZ | 262 | include/linux/sched.h | #define DEF_PRIORITY (20*HZ/100) /* 200 ms time slices */ |
HZ | 110 | include/linux/sonycd535.h | #define SONY_JIFFIES_TIMEOUT (5*HZ) /* Maximum time |
HZ | 115 | include/linux/timex.h | #define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */ |
HZ | 117 | include/linux/timex.h | #define FINETUNE ((((((long)LATCH * HZ - CLOCK_TICK_RATE) << SHIFT_HZ) * \ |
HZ | 119 | include/linux/timex.h | << (SHIFT_SCALE-SHIFT_HZ)) / HZ) |
HZ | 593 | include/linux/tpqic02.h | #define TIM_S (4*HZ) /* 4 seconds (normal cmds) */ |
HZ | 594 | include/linux/tpqic02.h | #define TIM_M (30*HZ) /* 30 seconds (write FM) */ |
HZ | 595 | include/linux/tpqic02.h | #define TIM_R (8*60*HZ) /* 8 minutes (retensioning) */ |
HZ | 596 | include/linux/tpqic02.h | #define TIM_F (2*3600*HZ) /* est. 1.2hr for full tape read/write+2 retens */ |
HZ | 67 | include/linux/xd.h | #define XD_TIMEOUT HZ /* 1 second timeout */ |
HZ | 42 | include/net/ip.h | #define IP_FRAG_TIME (30 * HZ) /* fragment lifetime */ |
HZ | 50 | include/net/route.h | #define RT_CACHE_TIMEOUT (HZ*300) |
HZ | 56 | include/net/route.h | #define RT_CACHE_BUBBLE_THRESHOULD (HZ*5) |
HZ | 326 | include/net/sock.h | #define SOCK_DESTROY_TIME (10*HZ) |
HZ | 51 | include/net/tcp.h | #define TCP_TIMEOUT_LEN (15*60*HZ) /* should be about 15 mins */ |
HZ | 52 | include/net/tcp.h | #define TCP_TIMEWAIT_LEN (60*HZ) /* how long to wait to successfully |
HZ | 54 | include/net/tcp.h | #define TCP_FIN_TIMEOUT (3*60*HZ) /* BSD style FIN_WAIT2 deadlock breaker */ |
HZ | 55 | include/net/tcp.h | #define TCP_ACK_TIME (3*HZ) /* time to delay before sending an ACK */ |
HZ | 60 | include/net/tcp.h | #define TCP_TIMEOUT_INIT (3*HZ) /* RFC 1122 initial timeout value */ |
HZ | 375 | init/main.c | loops_per_sec *= HZ; |
HZ | 28 | kernel/info.c | val.uptime = jiffies / HZ; |
HZ | 33 | kernel/itimer.c | if (sec > (ULONG_MAX / HZ)) |
HZ | 35 | kernel/itimer.c | usec += 1000000 / HZ - 1; |
HZ | 36 | kernel/itimer.c | usec /= 1000000 / HZ; |
HZ | 37 | kernel/itimer.c | return HZ*sec+usec; |
HZ | 42 | kernel/itimer.c | value->tv_usec = (jiffies % HZ) * (1000000 / HZ); |
HZ | 43 | kernel/itimer.c | value->tv_sec = jiffies / HZ; |
HZ | 41 | kernel/sched.c | long tick = 1000000 / HZ; /* timer interrupt period */ |
HZ | 43 | kernel/sched.c | int tickadj = 500/HZ; /* microsecs */ |
HZ | 683 | kernel/sched.c | #if HZ == 100 |
HZ | 820 | kernel/sched.c | (((current->stime + current->utime) / HZ) >= current->rlim[RLIMIT_CPU].rlim_max)) |
HZ | 823 | kernel/sched.c | (((current->stime + current->utime) % HZ) == 0)) { |
HZ | 824 | kernel/sched.c | psecs = (current->stime + current->utime) / HZ; |
HZ | 211 | kernel/time.c | if (txc.tick < 900000/HZ || txc.tick > 1100000/HZ) |
HZ | 234 | mm/kmalloc.c | if (priority != GFP_BUFFER && (last + 10 * HZ < jiffies)) { |
HZ | 37 | mm/vmscan.c | int swapout_interval = HZ / 4; |
HZ | 37 | net/802/tr.c | #define RIF_TIMEOUT 60*10*HZ |
HZ | 38 | net/802/tr.c | #define RIF_CHECK_INTERVAL 60*HZ |
HZ | 221 | net/appletalk/ddp.c | sk->timer.expires=jiffies+10*HZ; |
HZ | 387 | net/appletalk/ddp.c | current->timeout = jiffies + (HZ/10); |
HZ | 433 | net/ax25/af_ax25.c | ax25->timer.expires = jiffies + 10 * HZ; |
HZ | 787 | net/ipv4/af_inet.c | current->timeout = jiffies + HZ*sk->lingertime; |
HZ | 150 | net/ipv4/arp.c | #define ARP_RES_TIME (5*HZ) |
HZ | 151 | net/ipv4/arp.c | #define ARP_DEAD_RES_TIME (60*HZ) |
HZ | 164 | net/ipv4/arp.c | #define ARP_TIMEOUT (600*HZ) |
HZ | 172 | net/ipv4/arp.c | #define ARP_CHECK_INTERVAL (60*HZ) |
HZ | 180 | net/ipv4/arp.c | #define ARP_CONFIRM_INTERVAL (300*HZ) |
HZ | 504 | net/ipv4/arp.c | entry->timer.expires = jiffies + HZ/10; |
HZ | 153 | net/ipv4/igmp.c | i->timer.expires=jiffies+i->time*HZ; |
HZ | 177 | net/ipv4/igmp.c | i->timer.expires=jiffies+i->time*HZ; |
HZ | 211 | net/ipv4/igmp.c | tv=random()%(max_resp_time*HZ/IGMP_TIMER_SCALE); /* Pick a number any number 8) */ |
HZ | 307 | net/ipv4/igmp.c | if(im->timer.expires>max_resp_time*HZ/IGMP_TIMER_SCALE) |
HZ | 323 | net/ipv4/ipmr.c | cache->mfc_timer.expires=jiffies+10*HZ; |
HZ | 842 | net/ipv4/tcp.c | sk->rto = min(sk->rto << 1, 120*HZ); |
HZ | 971 | net/ipv4/tcp.c | sk->retransmit_timer.expires = jiffies+HZ; |
HZ | 1552 | net/ipv4/tcp.c | sk->partial_timer.expires = jiffies+HZ; |
HZ | 1596 | net/ipv4/tcp.c | reset_xmit_timer(sk, TIME_WRITE, HZ); |
HZ | 2106 | net/ipv4/tcp.c | reset_xmit_timer(sk, TIME_WRITE, HZ); |
HZ | 3644 | net/ipv4/tcp.c | if (sk->rto > 120*HZ) |
HZ | 3645 | net/ipv4/tcp.c | sk->rto = 120*HZ; |
HZ | 3744 | net/ipv4/tcp.c | if (sk->rto > 120*HZ) |
HZ | 3745 | net/ipv4/tcp.c | sk->rto = 120*HZ; |
HZ | 5440 | net/ipv4/tcp.c | sk->rto = min(sk->rto << 1, 120*HZ); |
HZ | 269 | net/netrom/af_netrom.c | sk->timer.expires = jiffies + 10 * HZ; |
HZ | 151 | net/unix/af_unix.c | sk->timer.expires=jiffies+10*HZ; /* No real hurry try it every 10 seconds or so */ |
HZ | 159 | net/unix/af_unix.c | sk->timer.expires=jiffies+HZ; /* Normally 1 second after will clean up. After that we try every 10 */ |