root/fs/umsdos/inode.c

/* [previous][next][first][last][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. UMSDOS_put_inode
  2. UMSDOS_put_super
  3. UMSDOS_statfs
  4. umsdos_real_lookup
  5. umsdos_setup_dir_inode
  6. umsdos_set_dirinfo
  7. umsdos_isinit
  8. umsdos_patch_inode
  9. umsdos_get_dirowner
  10. UMSDOS_read_inode
  11. UMSDOS_write_inode
  12. UMSDOS_notify_change
  13. UMSDOS_read_super
  14. init_umsdos_fs
  15. init_module
  16. cleanup_module

   1 /*
   2  *  linux/fs/umsdos/inode.c
   3  *
   4  *      Written 1993 by Jacques Gelinas 
   5  *      Inspired from linux/fs/msdos/... by Werner Almesberger
   6  *
   7  */
   8 
   9 #include <linux/module.h>
  10 
  11 #include <linux/fs.h>
  12 #include <linux/msdos_fs.h>
  13 #include <linux/kernel.h>
  14 #include <linux/sched.h>
  15 #include <linux/errno.h>
  16 #include <asm/segment.h>
  17 #include <linux/string.h>
  18 #include <linux/stat.h>
  19 #include <linux/umsdos_fs.h>
  20 
  21 struct inode *pseudo_root=NULL;         /* Useful to simulate the pseudo DOS */
  22                                                                         /* directory. See UMSDOS_readdir_x() */
  23 
  24 /* #Specification: convention / PRINTK Printk and printk
  25         Here is the convention for the use of printk inside fs/umsdos
  26 
  27         printk carry important message (error or status).
  28         Printk is for debugging (it is a macro defined at the beginning of
  29                    most source.
  30         PRINTK is a nulled Printk macro.
  31 
  32         This convention makes the source easier to read, and Printk easier
  33         to shut off.
  34 */
  35 #define PRINTK(x)
  36 #define Printk(x) printk x
  37 
  38 
  39 void UMSDOS_put_inode(struct inode *inode)
     /* [previous][next][first][last][top][bottom][index][help] */
  40 {
  41         PRINTK (("put inode %x owner %x pos %d dir %x\n",inode
  42                 ,inode->u.umsdos_i.i_emd_owner,inode->u.umsdos_i.pos
  43                 ,inode->u.umsdos_i.i_emd_dir));
  44         if (inode != NULL && inode == pseudo_root){
  45                 printk ("Umsdos: Oops releasing pseudo_root. Notify jacques@solucorp.qc.ca\n");
  46         }
  47         msdos_put_inode(inode);
  48 }
  49 
  50 
  51 void UMSDOS_put_super(struct super_block *sb)
     /* [previous][next][first][last][top][bottom][index][help] */
  52 {
  53         msdos_put_super(sb);
  54         MOD_DEC_USE_COUNT;
  55 }
  56 
  57 
  58 void UMSDOS_statfs(struct super_block *sb,struct statfs *buf, int bufsiz)
     /* [previous][next][first][last][top][bottom][index][help] */
  59 {
  60         msdos_statfs(sb,buf,bufsiz);
  61 }
  62 
  63 
  64 /*
  65         Call msdos_lookup, but set back the original msdos function table.
  66         Return 0 if ok, or a negative error code if not.
  67 */
  68 int umsdos_real_lookup (
     /* [previous][next][first][last][top][bottom][index][help] */
  69         struct inode *dir,
  70         const char *name,
  71         int len,
  72         struct inode **result)  /* Will hold inode of the file, if successful */
  73 {
  74         int ret;
  75         dir->i_count++;
  76         ret = msdos_lookup (dir,name,len,result);
  77         return ret;
  78 }
  79 /*
  80         Complete the setup of an directory inode.
  81         First, it completes the function pointers, then
  82         it locates the EMD file. If the EMD is there, then plug the
  83         umsdos function table. If not, use the msdos one.
  84 */
  85 void umsdos_setup_dir_inode (struct inode *inode)
     /* [previous][next][first][last][top][bottom][index][help] */
  86 {
  87         inode->u.umsdos_i.i_emd_dir = 0;
  88         {
  89                 struct inode *emd_dir = umsdos_emd_dir_lookup (inode,0);
  90                 extern struct inode_operations umsdos_rdir_inode_operations;
  91                 inode->i_op = emd_dir != NULL
  92                         ? &umsdos_dir_inode_operations
  93                         : &umsdos_rdir_inode_operations;
  94                 iput (emd_dir);
  95         }
  96 }
  97 /*
  98         Add some info into an inode so it can find its owner quickly
  99 */
 100 void umsdos_set_dirinfo(
     /* [previous][next][first][last][top][bottom][index][help] */
 101         struct inode *inode,
 102         struct inode *dir,
 103         off_t f_pos)
 104 {
 105         struct inode *emd_owner = umsdos_emd_dir_lookup(dir,1);
 106         inode->u.umsdos_i.i_dir_owner = dir->i_ino;
 107         inode->u.umsdos_i.i_emd_owner = emd_owner->i_ino;
 108         iput (emd_owner);
 109         inode->u.umsdos_i.pos = f_pos;
 110 }
 111 /*
 112         Tells if an Umsdos inode has been "patched" once.
 113         Return != 0 if so.
 114 */
 115 int umsdos_isinit (struct inode *inode)
     /* [previous][next][first][last][top][bottom][index][help] */
 116 {
 117 #if     1
 118         return inode->u.umsdos_i.i_emd_owner != 0;
 119 #elif 0
 120         return inode->i_atime != 0;
 121 #else
 122         return inode->i_count > 1;
 123 #endif
 124 }
 125 /*
 126         Connect the proper tables in the inode and add some info.
 127 */
 128 void umsdos_patch_inode (
     /* [previous][next][first][last][top][bottom][index][help] */
 129         struct inode *inode,
 130         struct inode *dir,              /* May be NULL */
 131         off_t f_pos)
 132 {
 133         /*
 134                 This function is called very early to setup the inode, somewhat
 135                 too early (called by UMSDOS_read_inode). At this point, we can't
 136                 do to much, such as lookup up EMD files and so on. This causes
 137                 confusion in the kernel. This is why some initialisation
 138                 will be done when dir != NULL only.
 139 
 140                 UMSDOS do run piggy back on top of msdos fs. It looks like something
 141                 is missing in the VFS to accommodate stacked fs. Still unclear what
 142                 (quite honestly).
 143 
 144                 Well, maybe one! A new entry "may_unmount" which would allow
 145                 the stacked fs to allocate some inode permanently and release
 146                 them at the end. Doing that now introduce a problem. unmount
 147                 always fail because some inodes are in use.
 148         */
 149         if (!umsdos_isinit(inode)){
 150                 inode->u.umsdos_i.i_emd_dir = 0;
 151                 if (S_ISREG(inode->i_mode)){
 152                         if (inode->i_op->bmap != NULL){
 153                                 inode->i_op = &umsdos_file_inode_operations;
 154                         }else{
 155                                 inode->i_op = &umsdos_file_inode_operations_no_bmap;
 156                         }
 157                 }else if (S_ISDIR(inode->i_mode)){
 158                         if (dir != NULL){
 159                                 umsdos_setup_dir_inode(inode);
 160                         }
 161                 }else if (S_ISLNK(inode->i_mode)){
 162                         inode->i_op = &umsdos_symlink_inode_operations;
 163                 }else if (S_ISCHR(inode->i_mode)){
 164                         inode->i_op = &chrdev_inode_operations;
 165                 }else if (S_ISBLK(inode->i_mode)){
 166                         inode->i_op = &blkdev_inode_operations;
 167                 }else if (S_ISFIFO(inode->i_mode)){
 168                         init_fifo(inode);
 169                 }
 170                 if (dir != NULL){
 171                         /* #Specification: inode / umsdos info
 172                                 The first time an inode is seen (inode->i_count == 1),
 173                                 the inode number of the EMD file which control this inode
 174                                 is tagged to this inode. It allows operation such
 175                                 as notify_change to be handled.
 176                         */
 177                         /*
 178                                 This is done last because it also control the
 179                                 status of umsdos_isinit()
 180                         */
 181                         umsdos_set_dirinfo (inode,dir,f_pos);
 182                 }
 183         }else if (dir != NULL){
 184                 /*
 185                         Test to see if the info is maintained.
 186                         This should be removed when the file system will be proven.
 187                 */
 188                 struct inode *emd_owner = umsdos_emd_dir_lookup(dir,1);
 189                 iput (emd_owner);
 190                 if (emd_owner->i_ino != inode->u.umsdos_i.i_emd_owner){
 191                         printk ("UMSDOS: *** EMD_OWNER ??? *** ino = %ld %ld <> %ld "
 192                                 ,inode->i_ino,emd_owner->i_ino,inode->u.umsdos_i.i_emd_owner);
 193                 }
 194         }
 195 }
 196 /*
 197         Get the inode of the directory which owns this inode.
 198         Return 0 if ok, -EIO if error.
 199 */
 200 int umsdos_get_dirowner(
     /* [previous][next][first][last][top][bottom][index][help] */
 201         struct inode *inode,
 202         struct inode **result)  /* Hold NULL if any error */
 203                                                         /* else, the inode of the directory */
 204 {
 205         int ret = -EIO;
 206         unsigned long ino = inode->u.umsdos_i.i_dir_owner;
 207         *result = NULL;
 208         if (ino == 0){
 209                 printk ("UMSDOS: umsdos_get_dirowner ino == 0\n");
 210         }else{
 211                 struct inode *dir = *result = iget(inode->i_sb,ino);
 212                 if (dir != NULL){
 213                         umsdos_patch_inode (dir,NULL,0);
 214                         ret = 0;
 215                 }
 216         }
 217         return ret;
 218 }
 219 /*
 220         Load an inode from disk.
 221 */
 222 void UMSDOS_read_inode(struct inode *inode)
     /* [previous][next][first][last][top][bottom][index][help] */
 223 {
 224         PRINTK (("read inode %x ino = %d ",inode,inode->i_ino));
 225         msdos_read_inode(inode);
 226         PRINTK (("ino = %d %d\n",inode->i_ino,inode->i_count));
 227         if (S_ISDIR(inode->i_mode)
 228                 && (inode->u.umsdos_i.u.dir_info.creating != 0
 229                         || inode->u.umsdos_i.u.dir_info.looking != 0
 230                         || inode->u.umsdos_i.u.dir_info.p != NULL)){
 231                 Printk (("read inode %d %d %p\n"
 232                         ,inode->u.umsdos_i.u.dir_info.creating
 233                         ,inode->u.umsdos_i.u.dir_info.looking
 234                         ,inode->u.umsdos_i.u.dir_info.p));
 235         }
 236         /* #Specification: Inode / post initialisation
 237                 To completely initialise an inode, we need access to the owner
 238                 directory, so we can locate more info in the EMD file. This is
 239                 not available the first time the inode is access, we use
 240                 a value in the inode to tell if it has been finally initialised.
 241 
 242                 At first, we have tried testing i_count but it was causing
 243                 problem. It is possible that two or more process use the
 244                 newly accessed inode. While the first one block during
 245                 the initialisation (probably while reading the EMD file), the
 246                 others believe all is well because i_count > 1. They go banana
 247                 with a broken inode. See umsdos_lookup_patch and umsdos_patch_inode.
 248         */
 249         umsdos_patch_inode(inode,NULL,0);
 250 }
 251 
 252 /*
 253         Update the disk with the inode content
 254 */
 255 void UMSDOS_write_inode(struct inode *inode)
     /* [previous][next][first][last][top][bottom][index][help] */
 256 {
 257         struct iattr newattrs;
 258 
 259         PRINTK (("UMSDOS_write_inode emd %d\n",inode->u.umsdos_i.i_emd_owner));
 260         msdos_write_inode(inode);
 261         newattrs.ia_mtime = inode->i_mtime;
 262         newattrs.ia_atime = inode->i_atime;
 263         newattrs.ia_ctime = inode->i_ctime;
 264         newattrs.ia_valid = ATTR_MTIME | ATTR_ATIME | ATTR_CTIME;
 265         /*
 266                 UMSDOS_notify_change is convenient to call here
 267                 to update the EMD entry associated with this inode.
 268                 But it has the side effect to re"dirt" the inode.
 269         */
 270         UMSDOS_notify_change (inode, &newattrs);
 271         inode->i_dirt = 0;
 272 }
 273 
 274 int UMSDOS_notify_change(struct inode *inode, struct iattr *attr)
     /* [previous][next][first][last][top][bottom][index][help] */
 275 {
 276         int ret = 0;
 277 
 278         if ((ret = inode_change_ok(inode, attr)) != 0) 
 279                 return ret;
 280 
 281         if (inode->i_nlink > 0){
 282                 /* #Specification: notify_change / i_nlink > 0
 283                         notify change is only done for inode with nlink > 0. An inode
 284                         with nlink == 0 is no longer associated with any entry in
 285                         the EMD file, so there is nothing to update.
 286                 */
 287                 unsigned long i_emd_owner = inode->u.umsdos_i.i_emd_owner;
 288                 if (inode == inode->i_sb->s_mounted){
 289                         /* #Specification: root inode / attributes
 290                                 I don't know yet how this should work. Normally
 291                                 the attributes (permissions bits, owner, times) of
 292                                 a directory are stored in the EMD file of its parent.
 293 
 294                                 One thing we could do is store the attributes of the root
 295                                 inode in its own EMD file. A simple entry named "." could
 296                                 be used for this special case. It would be read once
 297                                 when the file system is mounted and update in
 298                                 UMSDOS_notify_change() (right here).
 299 
 300                                 I am not sure of the behavior of the root inode for
 301                                 a real UNIX file system. For now, this is a nop.
 302                         */
 303                 }else if (i_emd_owner != 0xffffffff && i_emd_owner != 0){
 304                         /* This inode is not a EMD file nor an inode used internally
 305                                 by MSDOS, so we can update its status.
 306                                 See emd.c
 307                         */
 308                         struct inode *emd_owner = iget (inode->i_sb,i_emd_owner);
 309                         PRINTK (("notify change %p ",inode));
 310                         if (emd_owner == NULL){
 311                                 printk ("UMSDOS: emd_owner = NULL ???");
 312                                 ret = -EPERM;
 313                         }else{
 314                                 struct file filp;
 315                                 struct umsdos_dirent entry;
 316                                 filp.f_pos = inode->u.umsdos_i.pos;
 317                                 filp.f_reada = 0;
 318                                 PRINTK (("pos = %d ",filp.f_pos));
 319                                 /* Read only the start of the entry since we don't touch */
 320                                 /* the name */
 321                                 ret = umsdos_emd_dir_read (emd_owner,&filp,(char*)&entry
 322                                         ,UMSDOS_REC_SIZE);
 323                                 if (ret == 0){
 324                                         if (attr->ia_valid & ATTR_UID) 
 325                                                 entry.uid = attr->ia_uid;
 326                                         if (attr->ia_valid & ATTR_GID) 
 327                                                 entry.gid = attr->ia_gid;
 328                                         if (attr->ia_valid & ATTR_MODE) 
 329                                                 entry.mode = attr->ia_mode;
 330                                         if (attr->ia_valid & ATTR_ATIME) 
 331                                                 entry.atime = attr->ia_atime;
 332                                         if (attr->ia_valid & ATTR_MTIME) 
 333                                                 entry.mtime = attr->ia_mtime;
 334                                         if (attr->ia_valid & ATTR_CTIME) 
 335                                                 entry.ctime = attr->ia_ctime;
 336 
 337                                         entry.nlink = inode->i_nlink;
 338                                         filp.f_pos = inode->u.umsdos_i.pos;
 339                                         ret = umsdos_emd_dir_write (emd_owner,&filp,(char*)&entry
 340                                                 ,UMSDOS_REC_SIZE);
 341 
 342                                         PRINTK (("notify pos %d ret %d nlink %d "
 343                                                 ,inode->u.umsdos_i.pos
 344                                                 ,ret,entry.nlink));
 345                                         /* #Specification: notify_change / msdos fs
 346                                                 notify_change operation are done only on the
 347                                                 EMD file. The msdos fs is not even called.
 348                                         */
 349                                 }
 350                                 iput (emd_owner);
 351                         }
 352                         PRINTK (("\n"));
 353                 }
 354         }
 355         if (ret == 0) 
 356                 inode_setattr(inode, attr);
 357         return ret;
 358 }
 359 
 360 /* #Specification: function name / convention
 361         A simple convention for function name has been used in
 362         the UMSDOS file system. First all function use the prefix
 363         umsdos_ to avoid name clash with other part of the kernel.
 364 
 365         And standard VFS entry point use the prefix UMSDOS (upper case)
 366         so it's easier to tell them apart.
 367 */
 368 
 369 static struct super_operations umsdos_sops = { 
 370         UMSDOS_read_inode,
 371         UMSDOS_notify_change,
 372         UMSDOS_write_inode,
 373         UMSDOS_put_inode,
 374         UMSDOS_put_super,
 375         NULL, /* added in 0.96c */
 376         UMSDOS_statfs,
 377         NULL
 378 };
 379 
 380 /*
 381         Read the super block of an Extended MS-DOS FS.
 382 */
 383 struct super_block *UMSDOS_read_super(
     /* [previous][next][first][last][top][bottom][index][help] */
 384         struct super_block *s,
 385         void *data,
 386         int silent)
 387 {
 388         /* #Specification: mount / options
 389                 Umsdos run on top of msdos. Currently, it supports no
 390                 mount option, but happily pass all option received to
 391                 the msdos driver. I am not sure if all msdos mount option
 392                 make sense with Umsdos. Here are at least those who
 393                 are useful.
 394                         uid=
 395                         gid=
 396 
 397                 These options affect the operation of umsdos in directories
 398                 which do not have an EMD file. They behave like normal
 399                 msdos directory, with all limitation of msdos.
 400         */
 401         struct super_block *sb;
 402         MOD_INC_USE_COUNT;
 403         sb = msdos_read_super(s,data,silent);
 404         printk ("UMSDOS Beta 0.6 (compatibility level %d.%d, fast msdos)\n"
 405                 ,UMSDOS_VERSION,UMSDOS_RELEASE);
 406         if (sb != NULL){
 407                 MSDOS_SB(sb)->dotsOK = 0;  /* disable hidden==dotfile */
 408                 sb->s_op = &umsdos_sops;
 409                 PRINTK (("umsdos_read_super %p\n",sb->s_mounted));
 410                 umsdos_setup_dir_inode (sb->s_mounted);
 411                 PRINTK (("End umsdos_read_super\n"));
 412                 if (s == super_blocks){
 413                         /* #Specification: pseudo root / mount
 414                                 When a umsdos fs is mounted, a special handling is done
 415                                 if it is the root partition. We check for the presence
 416                                 of the file /linux/etc/init or /linux/etc/rc or
 417                                 /linux/sbin/init. If one is there, we do a chroot("/linux").
 418 
 419                                 We check both because (see init/main.c) the kernel
 420                                 try to exec init at different place and if it fails
 421                                 it tries /bin/sh /etc/rc. To be consistent with
 422                                 init/main.c, many more test would have to be done
 423                                 to locate init. Any complain ?
 424 
 425                                 The chroot is done manually in init/main.c but the
 426                                 info (the inode) is located at mount time and store
 427                                 in a global variable (pseudo_root) which is used at
 428                                 different place in the umsdos driver. There is no
 429                                 need to store this variable elsewhere because it
 430                                 will always be one, not one per mount.
 431 
 432                                 This feature allows the installation
 433                                 of a linux system within a DOS system in a subdirectory.
 434         
 435                                 A user may install its linux stuff in c:\linux
 436                                 avoiding any clash with existing DOS file and subdirectory.
 437                                 When linux boots, it hides this fact, showing a normal
 438                                 root directory with /etc /bin /tmp ...
 439 
 440                                 The word "linux" is hardcoded in /usr/include/linux/umsdos_fs.h
 441                                 in the macro UMSDOS_PSDROOT_NAME.
 442                         */
 443 
 444                         struct inode *pseudo;
 445                         Printk (("Mounting root\n"));
 446                         if (umsdos_real_lookup (sb->s_mounted,UMSDOS_PSDROOT_NAME
 447                                         ,UMSDOS_PSDROOT_LEN,&pseudo)==0
 448                                 && S_ISDIR(pseudo->i_mode)){
 449                                 struct inode *etc = NULL;
 450                                 struct inode *sbin = NULL;
 451                                 int pseudo_ok = 0;
 452                                 Printk (("/%s is there\n",UMSDOS_PSDROOT_NAME));
 453                                 if (umsdos_real_lookup (pseudo,"etc",3,&etc)==0
 454                                         && S_ISDIR(etc->i_mode)){
 455                                         struct inode *init = NULL;
 456                                         struct inode *rc = NULL;
 457                                         Printk (("/%s/etc is there\n",UMSDOS_PSDROOT_NAME));
 458                                         if ((umsdos_real_lookup (etc,"init",4,&init)==0
 459                                                         && S_ISREG(init->i_mode))
 460                                                 || (umsdos_real_lookup (etc,"rc",2,&rc)==0
 461                                                         && S_ISREG(rc->i_mode))){
 462                                                 pseudo_ok = 1;
 463                                         }
 464                                         iput (init);
 465                                         iput (rc);
 466                                 }
 467                                 if (!pseudo_ok
 468                                         && umsdos_real_lookup (pseudo,"sbin",4,&sbin)==0
 469                                         && S_ISDIR(sbin->i_mode)){
 470                                         struct inode *init = NULL;
 471                                         Printk (("/%s/sbin is there\n",UMSDOS_PSDROOT_NAME));
 472                                         if (umsdos_real_lookup (sbin,"init",4,&init)==0
 473                                                         && S_ISREG(init->i_mode)){
 474                                                 pseudo_ok = 1;
 475                                         }
 476                                         iput (init);
 477                                 }
 478                                 if (pseudo_ok){
 479                                         umsdos_setup_dir_inode (pseudo);
 480                                         Printk (("Activating pseudo root /%s\n",UMSDOS_PSDROOT_NAME));
 481                                         pseudo_root = pseudo;
 482                                         pseudo->i_count++;
 483                                         pseudo = NULL;
 484                                 }
 485                                 iput (sbin);
 486                                 iput (etc);
 487                         }
 488                         iput (pseudo);
 489                 }
 490         } else {
 491                 MOD_DEC_USE_COUNT;
 492         }
 493         return sb;
 494 }
 495 
 496 
 497 static struct file_system_type umsdos_fs_type = {
 498         UMSDOS_read_super, "umsdos", 1, NULL
 499 };
 500 
 501 int init_umsdos_fs(void)
     /* [previous][next][first][last][top][bottom][index][help] */
 502 {
 503         return register_filesystem(&umsdos_fs_type);
 504 }
 505 
 506 #ifdef MODULE
 507 int init_module(void)
     /* [previous][next][first][last][top][bottom][index][help] */
 508 {
 509         int status;
 510 
 511         if ((status = init_umsdos_fs()) == 0)
 512                 register_symtab(0);
 513         return status;
 514 }
 515 
 516 void cleanup_module(void)
     /* [previous][next][first][last][top][bottom][index][help] */
 517 {
 518         unregister_filesystem(&umsdos_fs_type);
 519 }
 520 
 521 #endif
 522 

/* [previous][next][first][last][top][bottom][index][help] */