![[bottom]](../icons/bottom.png){kind=icon}
![[previous]](../icons/n_left.png){kind=icon}
![[next]](../icons/n_right.png){kind=icon}
![[first]](../icons/n_first.png){kind=icon}
![[last]](../icons/n_last.png){kind=icon}
![[top]](../icons/n_top.png){kind=icon}
![[index]](../icons/index.png){kind=icon}
![[help]](../icons/help.png){kind=icon}
*/
1 /*
2 * sbpcd.h Specify interface address and interface type here.
3 */
4
5 /*
6 * Attention! This file contains user-serviceable parts!
7 * I recommend to make use of it...
8 * If you feel helpless, look into linux/Documentation/cdrom/sbpcd
9 * (good idea anyway, at least before mailing me).
10 *
11 * The definitions for the first controller can get overridden by
12 * the kernel command line ("lilo boot option").
13 * Examples:
14 * sbpcd=0x300,LaserMate
15 * or
16 * sbpcd=0x230,SoundBlaster
17 * or
18 * sbpcd=0x338,SoundScape
19 * or
20 * sbpcd=0x2C0,Teac16bit
21 *
22 * If sbpcd gets used as a module, you can load it with
23 * insmod sbpcd.o sbpcd=0x300,0
24 * or
25 * insmod sbpcd.o sbpcd=0x230,1
26 * or
27 * insmod sbpcd.o sbpcd=0x338,2
28 * or
29 * insmod sbpcd.o sbpcd=0x2C0,3
30 * respective to override the configured address and type.
31 */
32
33 /*
34 * define your CDROM port base address as CDROM_PORT
35 * and specify the type of your interface card as SBPRO.
36 *
37 * address:
38 * ========
39 * SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ...
40 * LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ...
41 * SOUNDSCAPE addresses are from the LASERMATE type and range. You have to
42 * specify the REAL address here, not the configuration port address. Look
43 * at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let
44 * sbpcd auto-probe, if you are not firm with the address.
45 * There are some soundcards on the market with 0x0630, 0x0650, ...; their
46 * type is not obvious (both types are possible).
47 *
48 * example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1.
49 * if your soundcard has its CDROM port above 0x300, specify
50 * that address and try SBPRO 0 first.
51 * if your SoundScape configuration port is at 0x330, specify
52 * 0x338 and SBPRO 2.
53 *
54 * interface type:
55 * ===============
56 * set SBPRO to 1 for "true" SoundBlaster card
57 * set SBPRO to 0 for "compatible" soundcards and
58 * for "poor" (no sound) interface cards.
59 * set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards
60 * set SBPRO to 3 for Teac 16bit interface cards
61 *
62 * Almost all "compatible" sound boards need to set SBPRO to 0.
63 * If SBPRO is set wrong, the drives will get found - but any
64 * data access will give errors (audio access will work).
65 * The "OmniCD" no-sound interface card from CreativeLabs and most Teac
66 * interface cards need SBPRO 1.
67 *
68 * sound base:
69 * ===========
70 * The SOUND_BASE definition tells if we should try to turn the CD sound
71 * channels on. It will only be of use regarding soundcards with a SbPro
72 * compatible mixer.
73 *
74 * Example: #define SOUND_BASE 0x220 enables the sound card's CD channels
75 * #define SOUND_BASE 0 leaves the soundcard untouched
76 */
77 #if !(SBPCD_ISSUE-1) /* first (or if you have only one) interface board: */
78 #define CDROM_PORT 0x340 /* <-----------<< port address */
79 #define SBPRO 0 /* <-----------<< interface type */
80 #define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
81 #define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0 */
82 #endif
83 #if !(SBPCD_ISSUE-2) /* ==================== second interface board: === */
84 #define CDROM_PORT 0x344 /* <-----------<< port address */
85 #define SBPRO 0 /* <-----------<< interface type */
86 #define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
87 #define SOUND_BASE 0x000 /* <-----------<< sound address of this card or 0 */
88 #endif
89 #if !(SBPCD_ISSUE-3) /* ===================== third interface board: === */
90 #define CDROM_PORT 0x630 /* <-----------<< port address */
91 #define SBPRO 1 /* <-----------<< interface type */
92 #define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
93 #define SOUND_BASE 0x240 /* <-----------<< sound address of this card or 0 */
94 #endif
95 #if !(SBPCD_ISSUE-4) /* ==================== fourth interface board: === */
96 #define CDROM_PORT 0x634 /* <-----------<< port address */
97 #define SBPRO 0 /* <-----------<< interface type */
98 #define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
99 #define SOUND_BASE 0x000 /* <-----------<< sound address of this card or 0 */
100 #endif
101
102 /*
103 * some more or less user dependent definitions - service them!
104 */
105
106 /* Set this to 0 once you have configured your interface definitions right. */
107 #define DISTRIBUTION 1
108
109 #if DISTRIBUTION
110 #define READ_AUDIO 0
111 #else
112 /* max. number of audio frames to read with one */
113 /* request (allocates n* 2352 bytes kernel memory!) */
114 /* may be freely adjusted, f.e. 75 (= 1 sec.), at */
115 /* runtime by use of the CDROMAUDIOBUFSIZ ioctl. */
116 #define READ_AUDIO 75
117
118 /* tray control: eject tray if no disk is in (0 or 1) */
119 #define JUKEBOX 1
120
121 /* tray control: eject tray after last use (0 or 1) */
122 #define EJECT 1
123 #endif DISTRIBUTION
124
125 /*==========================================================================*/
126 /*==========================================================================*/
127 /*
128 * nothing to change below here if you are not experimenting
129 */
130 #ifndef _LINUX_SBPCD_H
131
132 #define _LINUX_SBPCD_H
133 /*==========================================================================*/
134 /*==========================================================================*/
135 #define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */
136 #undef FUTURE
137
138 #define TEST_UPC 0
139 #define SPEA_TEST 0
140 #define TEST_STI 0
141 #undef PATH_CHECK
142 #ifndef SOUND_BASE
143 #define SOUND_BASE 0
144 #endif
145 /*==========================================================================*/
146 /*
147 * DDI interface definitions
148 * "invented" by Fred N. van Kempen..
149 */
150 #define DDIOCSDBG 0x9000
151
152 /*==========================================================================*/
153 /*
154 * "private" IOCTL functions
155 */
156 #define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */
157
158 /*==========================================================================*/
159 /*
160 * Debug output levels
161 */
162 #define DBG_INF 1 /* necessary information */
163 #define DBG_BSZ 2 /* BLOCK_SIZE trace */
164 #define DBG_REA 3 /* READ status trace */
165 #define DBG_CHK 4 /* MEDIA CHECK trace */
166 #define DBG_TIM 5 /* datarate timer test */
167 #define DBG_INI 6 /* initialization trace */
168 #define DBG_TOC 7 /* tell TocEntry values */
169 #define DBG_IOC 8 /* ioctl trace */
170 #define DBG_STA 9 /* ResponseStatus() trace */
171 #define DBG_ERR 10 /* cc_ReadError() trace */
172 #define DBG_CMD 11 /* cmd_out() trace */
173 #define DBG_WRN 12 /* give explanation before auto-probing */
174 #define DBG_MUL 13 /* multi session code test */
175 #define DBG_IDX 14 /* test code for drive_id !=0 */
176 #define DBG_IOX 15 /* some special information */
177 #define DBG_DID 16 /* drive ID test */
178 #define DBG_RES 17 /* drive reset info */
179 #define DBG_SPI 18 /* SpinUp test */
180 #define DBG_IOS 19 /* ioctl trace: subchannel functions */
181 #define DBG_IO2 20 /* ioctl trace: general */
182 #define DBG_UPC 21 /* show UPC information */
183 #define DBG_XA1 22 /* XA mode debugging */
184 #define DBG_LCK 23 /* door (un)lock info */
185 #define DBG_SQ1 24 /* dump SubQ frame */
186 #define DBG_AUD 25 /* READ AUDIO debugging */
187 #define DBG_SEQ 26 /* Sequoia interface configuration trace */
188 #define DBG_LCS 27 /* Longshine LCS-7260 debugging trace */
189 #define DBG_CD2 28 /* MKE/Funai CD200 debugging trace */
190 #define DBG_TEA 29 /* TEAC CD-55A debugging trace */
191 #define DBG_ECS 30 /* ECS-AT (Vertos 100) debugging trace */
192 #define DBG_000 31 /* unnecessary information */
193
194 /*==========================================================================*/
195 /*==========================================================================*/
196
197 /*
198 * bits of flags_cmd_out:
199 */
200 #define f_respo3 0x100
201 #define f_putcmd 0x80
202 #define f_respo2 0x40
203 #define f_lopsta 0x20
204 #define f_getsta 0x10
205 #define f_ResponseStatus 0x08
206 #define f_obey_p_check 0x04
207 #define f_bit1 0x02
208 #define f_wait_if_busy 0x01
209
210 /*
211 * diskstate_flags:
212 */
213 #define x80_bit 0x80
214 #define upc_bit 0x40
215 #define volume_bit 0x20
216 #define toc_bit 0x10
217 #define multisession_bit 0x08
218 #define cd_size_bit 0x04
219 #define subq_bit 0x02
220 #define frame_size_bit 0x01
221
222 /*
223 * disk states (bits of diskstate_flags):
224 */
225 #define upc_valid (D_S[d].diskstate_flags&upc_bit)
226 #define volume_valid (D_S[d].diskstate_flags&volume_bit)
227 #define toc_valid (D_S[d].diskstate_flags&toc_bit)
228 #define cd_size_valid (D_S[d].diskstate_flags&cd_size_bit)
229 #define subq_valid (D_S[d].diskstate_flags&subq_bit)
230 #define frame_size_valid (D_S[d].diskstate_flags&frame_size_bit)
231
232 /*
233 * the status_bits variable
234 */
235 #define p_success 0x100
236 #define p_door_closed 0x80
237 #define p_caddy_in 0x40
238 #define p_spinning 0x20
239 #define p_check 0x10
240 #define p_busy_new 0x08
241 #define p_door_locked 0x04
242 #define p_disk_ok 0x01
243
244 /*
245 * LCS-7260 special status result bits:
246 */
247 #define p_lcs_door_locked 0x02
248 #define p_lcs_door_closed 0x01 /* probably disk_in */
249
250 /*
251 * CR-52x special status result bits:
252 */
253 #define p_caddin_old 0x40
254 #define p_success_old 0x08
255 #define p_busy_old 0x04
256 #define p_bit_1 0x02 /* hopefully unused now */
257
258 /*
259 * "generation specific" defs of the status result bits:
260 */
261 #define p0_door_closed 0x80
262 #define p0_caddy_in 0x40
263 #define p0_spinning 0x20
264 #define p0_check 0x10
265 #define p0_success 0x08 /* unused */
266 #define p0_busy 0x04
267 #define p0_bit_1 0x02 /* unused */
268 #define p0_disk_ok 0x01
269
270 #define pL_disk_in 0x40
271 #define pL_spinning 0x20
272 #define pL_check 0x10
273 #define pL_success 0x08 /* unused ?? */
274 #define pL_busy 0x04
275 #define pL_door_locked 0x02
276 #define pL_door_closed 0x01
277
278 #define pV_door_closed 0x40
279 #define pV_spinning 0x20
280 #define pV_check 0x10
281 #define pV_success 0x08
282 #define pV_busy 0x04
283 #define pV_door_locked 0x02
284 #define pV_disk_ok 0x01
285
286 #define p1_door_closed 0x80
287 #define p1_disk_in 0x40
288 #define p1_spinning 0x20
289 #define p1_check 0x10
290 #define p1_busy 0x08
291 #define p1_door_locked 0x04
292 #define p1_bit_1 0x02 /* unused */
293 #define p1_disk_ok 0x01
294
295 #define p2_disk_ok 0x80
296 #define p2_door_locked 0x40
297 #define p2_spinning 0x20
298 #define p2_busy2 0x10
299 #define p2_busy1 0x08
300 #define p2_door_closed 0x04
301 #define p2_disk_in 0x02
302 #define p2_check 0x01
303
304 /*
305 * used drive states:
306 */
307 #define st_door_closed (D_S[d].status_bits&p_door_closed)
308 #define st_caddy_in (D_S[d].status_bits&p_caddy_in)
309 #define st_spinning (D_S[d].status_bits&p_spinning)
310 #define st_check (D_S[d].status_bits&p_check)
311 #define st_busy (D_S[d].status_bits&p_busy_new)
312 #define st_door_locked (D_S[d].status_bits&p_door_locked)
313 #define st_diskok (D_S[d].status_bits&p_disk_ok)
314
315 /*
316 * bits of the CDi_status register:
317 */
318 #define s_not_result_ready 0x04 /* 0: "result ready" */
319 #define s_not_data_ready 0x02 /* 0: "data ready" */
320 #define s_attention 0x01 /* 1: "attention required" */
321 /*
322 * usable as:
323 */
324 #define DRV_ATTN ((inb(CDi_status)&s_attention)!=0)
325 #define DATA_READY ((inb(CDi_status)&s_not_data_ready)==0)
326 #define RESULT_READY ((inb(CDi_status)&s_not_result_ready)==0)
327
328 /*
329 * drive families and types (firmware versions):
330 */
331 #define drv_fam0 0x0100 /* CR-52x family */
332 #define drv_199 (drv_fam0+0x01) /* <200 */
333 #define drv_200 (drv_fam0+0x02) /* <201 */
334 #define drv_201 (drv_fam0+0x03) /* <210 */
335 #define drv_210 (drv_fam0+0x04) /* <211 */
336 #define drv_211 (drv_fam0+0x05) /* <300 */
337 #define drv_300 (drv_fam0+0x06) /* >=300 */
338
339 #define drv_fam1 0x0200 /* CR-56x family */
340 #define drv_099 (drv_fam1+0x01) /* <100 */
341 #define drv_100 (drv_fam1+0x02) /* >=100, only 1.02 and 5.00 known */
342
343 #define drv_fam2 0x0400 /* CD200 family */
344
345 #define drv_famT 0x0800 /* TEAC CD-55A */
346
347 #define drv_famL 0x1000 /* Longshine family */
348 #define drv_260 (drv_famL+0x01) /* LCS-7260 */
349 #define drv_e1 (drv_famL+0x01) /* LCS-7260, firmware "A E1" */
350 #define drv_f4 (drv_famL+0x02) /* LCS-7260, firmware "A4F4" */
351
352 #define drv_famV 0x2000 /* ECS-AT (vertos-100) family */
353 #define drv_at (drv_famV+0x01) /* ECS-AT, firmware "1.00" */
354
355 #define fam0_drive (D_S[d].drv_type&drv_fam0)
356 #define famL_drive (D_S[d].drv_type&drv_famL)
357 #define famV_drive (D_S[d].drv_type&drv_famV)
358 #define fam1_drive (D_S[d].drv_type&drv_fam1)
359 #define fam2_drive (D_S[d].drv_type&drv_fam2)
360 #define famT_drive (D_S[d].drv_type&drv_famT)
361 #define fam0L_drive (D_S[d].drv_type&(drv_fam0|drv_famL))
362 #define fam0V_drive (D_S[d].drv_type&(drv_fam0|drv_famV))
363 #define famLV_drive (D_S[d].drv_type&(drv_famL|drv_famV))
364 #define fam0LV_drive (D_S[d].drv_type&(drv_fam0|drv_famL|drv_famV))
365 #define fam1L_drive (D_S[d].drv_type&(drv_fam1|drv_famL))
366 #define fam1V_drive (D_S[d].drv_type&(drv_fam1|drv_famV))
367 #define fam1LV_drive (D_S[d].drv_type&(drv_fam1|drv_famL|drv_famV))
368 #define fam01_drive (D_S[d].drv_type&(drv_fam0|drv_fam1))
369 #define fam12_drive (D_S[d].drv_type&(drv_fam1|drv_fam2))
370 #define fam2T_drive (D_S[d].drv_type&(drv_fam2|drv_famT))
371
372 /*
373 * audio states:
374 */
375 #define audio_playing 2
376 #define audio_pausing 1
377
378 /*
379 * drv_pattern, drv_options:
380 */
381 #define speed_auto 0x80
382 #define speed_300 0x40
383 #define speed_150 0x20
384 #define audio_mono 0x04
385
386 /*
387 * values of cmd_type (0 else):
388 */
389 #define READ_M1 0x01 /* "data mode 1": 2048 bytes per frame */
390 #define READ_M2 0x02 /* "data mode 2": 12+2048+280 bytes per frame */
391 #define READ_SC 0x04 /* "subchannel info": 96 bytes per frame */
392 #define READ_AU 0x08 /* "audio frame": 2352 bytes per frame */
393
394 /*
395 * sense_byte:
396 *
397 * values: 00
398 * 01
399 * 81
400 * 82 "raw audio" mode
401 * xx from infobuf[0] after 85 00 00 00 00 00 00
402 */
403
404 /* audio status (bin) */
405 #define aud_00 0x00 /* Audio status byte not supported or not valid */
406 #define audx11 0x0b /* Audio play operation in progress */
407 #define audx12 0x0c /* Audio play operation paused */
408 #define audx13 0x0d /* Audio play operation successfully completed */
409 #define audx14 0x0e /* Audio play operation stopped due to error */
410 #define audx15 0x0f /* No current audio status to return */
411 /* audio status (bcd) */
412 #define aud_11 0x11 /* Audio play operation in progress */
413 #define aud_12 0x12 /* Audio play operation paused */
414 #define aud_13 0x13 /* Audio play operation successfully completed */
415 #define aud_14 0x14 /* Audio play operation stopped due to error */
416 #define aud_15 0x15 /* No current audio status to return */
417
418 /*
419 * highest allowed drive number (MINOR+1)
420 */
421 #define NR_SBPCD 4
422
423 /*
424 * we try to never disable interrupts - seems to work
425 */
426 #define SBPCD_DIS_IRQ 0
427
428 /*
429 * "write byte to port"
430 */
431 #define OUT(x,y) outb(y,x)
432
433 /*==========================================================================*/
434
435 #define MIXER_addr SOUND_BASE+4 /* sound card's address register */
436 #define MIXER_data SOUND_BASE+5 /* sound card's data register */
437 #define MIXER_CD_Volume 0x28 /* internal SB Pro register address */
438
439 /*==========================================================================*/
440
441 #define MAX_TRACKS 99
442
443 /*==========================================================================*/
444 /*
445 * To make conversions easier (machine dependent!)
446 */
447 typedef union _msf
448 {
449 u_int n;
450 u_char c[4];
451 } MSF;
452
453 typedef union _blk
454 {
455 u_int n;
456 u_char c[4];
457 } BLK;
458
459 /*==========================================================================*/
460
461 /*============================================================================
462 ==============================================================================
463
464 COMMAND SET of "old" drives like CR-521, CR-522
465 (the CR-562 family is different):
466
467 No. Command Code
468 --------------------------------------------
469
470 Drive Commands:
471 1 Seek 01
472 2 Read Data 02
473 3 Read XA-Data 03
474 4 Read Header 04
475 5 Spin Up 05
476 6 Spin Down 06
477 7 Diagnostic 07
478 8 Read UPC 08
479 9 Read ISRC 09
480 10 Play Audio 0A
481 11 Play Audio MSF 0B
482 12 Play Audio Track/Index 0C
483
484 Status Commands:
485 13 Read Status 81
486 14 Read Error 82
487 15 Read Drive Version 83
488 16 Mode Select 84
489 17 Mode Sense 85
490 18 Set XA Parameter 86
491 19 Read XA Parameter 87
492 20 Read Capacity 88
493 21 Read SUB_Q 89
494 22 Read Disc Code 8A
495 23 Read Disc Information 8B
496 24 Read TOC 8C
497 25 Pause/Resume 8D
498 26 Read Packet 8E
499 27 Read Path Check 00
500
501
502 all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first
503
504 mnemo 7-byte command #bytes response (r0...rn)
505 ________ ____________________ ____
506
507 Read Status:
508 status: 81. (1) one-byte command, gives the main
509 status byte
510 Read Error:
511 check1: 82 00 00 00 00 00 00. (6) r1: audio status
512
513 Read Packet:
514 check2: 8e xx 00 00 00 00 00. (xx) gets xx bytes response, relating
515 to commands 01 04 05 07 08 09
516
517 Play Audio:
518 play: 0a ll-bb-aa nn-nn-nn. (0) play audio, ll-bb-aa: starting block (lba),
519 nn-nn-nn: #blocks
520 Play Audio MSF:
521 0b mm-ss-ff mm-ss-ff (0) play audio from/to
522
523 Play Audio Track/Index:
524 0c ...
525
526 Pause/Resume:
527 pause: 8d pr 00 00 00 00 00. (0) pause (pr=00)
528 resume (pr=80) audio playing
529
530 Mode Select:
531 84 00 nn-nn ??-?? 00 (0) nn-nn: 2048 or 2340
532 possibly defines transfer size
533
534 set_vol: 84 83 00 00 sw le 00. (0) sw(itch): lrxxxxxx (off=1)
535 le(vel): min=0, max=FF, else half
536 (firmware 2.11)
537
538 Mode Sense:
539 get_vol: 85 03 00 00 00 00 00. (2) tell current audio volume setting
540
541 Read Disc Information:
542 tocdesc: 8b 00 00 00 00 00 00. (6) read the toc descriptor ("msf-bin"-format)
543
544 Read TOC:
545 tocent: 8c fl nn 00 00 00 00. (8) read toc entry #nn
546 (fl=0:"lba"-, =2:"msf-bin"-format)
547
548 Read Capacity:
549 capacit: 88 00 00 00 00 00 00. (5) "read CD-ROM capacity"
550
551
552 Read Path Check:
553 ping: 00 00 00 00 00 00 00. (2) r0=AA, r1=55
554 ("ping" if the drive is connected)
555
556 Read Drive Version:
557 ident: 83 00 00 00 00 00 00. (12) gives "MATSHITAn.nn"
558 (n.nn = 2.01, 2.11., 3.00, ...)
559
560 Seek:
561 seek: 01 00 ll-bb-aa 00 00. (0)
562 seek: 01 02 mm-ss-ff 00 00. (0)
563
564 Read Data:
565 read: 02 xx-xx-xx nn-nn fl. (??) read nn-nn blocks of 2048 bytes,
566 starting at block xx-xx-xx
567 fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
568
569 Read XA-Data:
570 read: 03 xx-xx-xx nn-nn fl. (??) read nn-nn blocks of 2340 bytes,
571 starting at block xx-xx-xx
572 fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
573
574 Read SUB_Q:
575 89 fl 00 00 00 00 00. (13) r0: audio status, r4-r7: lba/msf,
576 fl=0: "lba", fl=2: "msf"
577
578 Read Disc Code:
579 8a 00 00 00 00 00 00. (14) possibly extended "check condition"-info
580
581 Read Header:
582 04 00 ll-bb-aa 00 00. (0) 4 bytes response with "check2"
583 04 02 mm-ss-ff 00 00. (0) 4 bytes response with "check2"
584
585 Spin Up:
586 05 00 ll-bb-aa 00 00. (0) possibly implies a "seek"
587
588 Spin Down:
589 06 ...
590
591 Diagnostic:
592 07 00 ll-bb-aa 00 00. (2) 2 bytes response with "check2"
593 07 02 mm-ss-ff 00 00. (2) 2 bytes response with "check2"
594
595 Read UPC:
596 08 00 ll-bb-aa 00 00. (16)
597 08 02 mm-ss-ff 00 00. (16)
598
599 Read ISRC:
600 09 00 ll-bb-aa 00 00. (15) 15 bytes response with "check2"
601 09 02 mm-ss-ff 00 00. (15) 15 bytes response with "check2"
602
603 Set XA Parameter:
604 86 ...
605
606 Read XA Parameter:
607 87 ...
608
609 ==============================================================================
610 ============================================================================*/
611
612 /*
613 * commands
614 *
615 * CR-52x: CMD0_
616 * CR-56x: CMD1_
617 * CD200: CMD2_
618 * LCS-7260: CMDL_
619 * TEAC CD-55A: CMDT_
620 * ECS-AT: CMDV_
621 */
622 #define CMD1_RESET 0x0a
623 #define CMD2_RESET 0x01
624 #define CMDT_RESET 0xc0
625
626 #define CMD1_LOCK_CTL 0x0c
627 #define CMD2_LOCK_CTL 0x1e
628 #define CMDT_LOCK_CTL CMD2_LOCK_CTL
629 #define CMDL_LOCK_CTL 0x0e
630 #define CMDV_LOCK_CTL CMDL_LOCK_CTL
631
632 #define CMD1_TRAY_CTL 0x07
633 #define CMD2_TRAY_CTL 0x1b
634 #define CMDT_TRAY_CTL CMD2_TRAY_CTL
635 #define CMDL_TRAY_CTL 0x0d
636 #define CMDV_TRAY_CTL CMDL_TRAY_CTL
637
638 #define CMD1_MULTISESS 0x8d
639 #define CMDL_MULTISESS 0x8c
640 #define CMDV_MULTISESS CMDL_MULTISESS
641
642 #define CMD1_SUBCHANINF 0x11
643 #define CMD2_SUBCHANINF 0x??
644
645 #define CMD1_ABORT 0x08
646 #define CMD2_ABORT 0x08
647 #define CMDT_ABORT 0x08
648
649 #define CMD2_x02 0x02
650
651 #define CMD2_SETSPEED 0xda
652
653 #define CMD0_PATH_CHECK 0x00
654 #define CMD1_PATH_CHECK 0x???
655 #define CMD2_PATH_CHECK 0x???
656 #define CMDT_PATH_CHECK 0x???
657 #define CMDL_PATH_CHECK CMD0_PATH_CHECK
658 #define CMDV_PATH_CHECK CMD0_PATH_CHECK
659
660 #define CMD0_SEEK 0x01
661 #define CMD1_SEEK CMD0_SEEK
662 #define CMD2_SEEK 0x2b
663 #define CMDT_SEEK CMD2_SEEK
664 #define CMDL_SEEK CMD0_SEEK
665 #define CMDV_SEEK CMD0_SEEK
666
667 #define CMD0_READ 0x02
668 #define CMD1_READ 0x10
669 #define CMD2_READ 0x28
670 #define CMDT_READ CMD2_READ
671 #define CMDL_READ CMD0_READ
672 #define CMDV_READ CMD0_READ
673
674 #define CMD0_READ_XA 0x03
675 #define CMD2_READ_XA 0xd4
676 #define CMD2_READ_XA2 0xd5
677 #define CMDL_READ_XA CMD0_READ_XA /* really ?? */
678 #define CMDV_READ_XA CMD0_READ_XA
679
680 #define CMD0_READ_HEAD 0x04
681
682 #define CMD0_SPINUP 0x05
683 #define CMD1_SPINUP 0x02
684 #define CMD2_SPINUP CMD2_TRAY_CTL
685 #define CMDL_SPINUP CMD0_SPINUP
686 #define CMDV_SPINUP CMD0_SPINUP
687
688 #define CMD0_SPINDOWN 0x06 /* really??? */
689 #define CMD1_SPINDOWN 0x06
690 #define CMD2_SPINDOWN CMD2_TRAY_CTL
691 #define CMDL_SPINDOWN 0x0d
692 #define CMDV_SPINDOWN CMD0_SPINDOWN
693
694 #define CMD0_DIAG 0x07
695
696 #define CMD0_READ_UPC 0x08
697 #define CMD1_READ_UPC 0x88
698 #define CMD2_READ_UPC 0x???
699 #define CMDL_READ_UPC CMD0_READ_UPC
700 #define CMDV_READ_UPC 0x8f
701
702 #define CMD0_READ_ISRC 0x09
703
704 #define CMD0_PLAY 0x0a
705 #define CMD1_PLAY 0x???
706 #define CMD2_PLAY 0x???
707 #define CMDL_PLAY CMD0_PLAY
708 #define CMDV_PLAY CMD0_PLAY
709
710 #define CMD0_PLAY_MSF 0x0b
711 #define CMD1_PLAY_MSF 0x0e
712 #define CMD2_PLAY_MSF 0x47
713 #define CMDT_PLAY_MSF CMD2_PLAY_MSF
714 #define CMDL_PLAY_MSF 0x???
715
716 #define CMD0_PLAY_TI 0x0c
717 #define CMD1_PLAY_TI 0x0f
718
719 #define CMD0_STATUS 0x81
720 #define CMD1_STATUS 0x05
721 #define CMD2_STATUS 0x00
722 #define CMDT_STATUS CMD2_STATUS
723 #define CMDL_STATUS CMD0_STATUS
724 #define CMDV_STATUS CMD0_STATUS
725 #define CMD2_SEEK_LEADIN 0x00
726
727 #define CMD0_READ_ERR 0x82
728 #define CMD1_READ_ERR CMD0_READ_ERR
729 #define CMD2_READ_ERR 0x03
730 #define CMDT_READ_ERR CMD2_READ_ERR /* get audio status */
731 #define CMDL_READ_ERR CMD0_READ_ERR
732 #define CMDV_READ_ERR CMD0_READ_ERR
733
734 #define CMD0_READ_VER 0x83
735 #define CMD1_READ_VER CMD0_READ_VER
736 #define CMD2_READ_VER 0x12
737 #define CMDT_READ_VER CMD2_READ_VER /* really ?? */
738 #define CMDL_READ_VER CMD0_READ_VER
739 #define CMDV_READ_VER CMD0_READ_VER
740
741 #define CMD0_SETMODE 0x84
742 #define CMD1_SETMODE 0x09
743 #define CMD2_SETMODE 0x55
744 #define CMDT_SETMODE CMD2_SETMODE
745 #define CMDL_SETMODE CMD0_SETMODE
746
747 #define CMD0_GETMODE 0x85
748 #define CMD1_GETMODE 0x84
749 #define CMD2_GETMODE 0x5a
750 #define CMDT_GETMODE CMD2_GETMODE
751 #define CMDL_GETMODE CMD0_GETMODE
752
753 #define CMD0_SET_XA 0x86
754
755 #define CMD0_GET_XA 0x87
756
757 #define CMD0_CAPACITY 0x88
758 #define CMD1_CAPACITY 0x85
759 #define CMD2_CAPACITY 0x25
760 #define CMDL_CAPACITY CMD0_CAPACITY /* missing in some firmware versions */
761
762 #define CMD0_READSUBQ 0x89
763 #define CMD1_READSUBQ 0x87
764 #define CMD2_READSUBQ 0x42
765 #define CMDT_READSUBQ CMD2_READSUBQ
766 #define CMDL_READSUBQ CMD0_READSUBQ
767 #define CMDV_READSUBQ CMD0_READSUBQ
768
769 #define CMD0_DISKCODE 0x8a
770
771 #define CMD0_DISKINFO 0x8b
772 #define CMD1_DISKINFO CMD0_DISKINFO
773 #define CMD2_DISKINFO 0x43
774 #define CMDT_DISKINFO CMD2_DISKINFO
775 #define CMDL_DISKINFO CMD0_DISKINFO
776 #define CMDV_DISKINFO CMD0_DISKINFO
777
778 #define CMD0_READTOC 0x8c
779 #define CMD1_READTOC CMD0_READTOC
780 #define CMD2_READTOC 0x???
781 #define CMDL_READTOC CMD0_READTOC
782 #define CMDV_READTOC CMD0_READTOC
783
784 #define CMD0_PAU_RES 0x8d
785 #define CMD1_PAU_RES 0x0d
786 #define CMD2_PAU_RES 0x4b
787 #define CMDT_PAUSE CMD2_PAU_RES
788 #define CMDL_PAU_RES CMD0_PAU_RES
789 #define CMDV_PAUSE CMD0_PAU_RES
790
791 #define CMD0_PACKET 0x8e
792 #define CMD1_PACKET CMD0_PACKET
793 #define CMD2_PACKET 0x???
794 #define CMDL_PACKET CMD0_PACKET
795 #define CMDV_PACKET 0x???
796
797 /*==========================================================================*/
798 /*==========================================================================*/
799 #endif _LINUX_SBPCD_H
800 /*==========================================================================*/
801 /*
802 * Overrides for Emacs so that we follow Linus's tabbing style.
803 * Emacs will notice this stuff at the end of the file and automatically
804 * adjust the settings for this buffer only. This must remain at the end
805 * of the file.
806 * ---------------------------------------------------------------------------
807 * Local variables:
808 * c-indent-level: 8
809 * c-brace-imaginary-offset: 0
810 * c-brace-offset: -8
811 * c-argdecl-indent: 8
812 * c-label-offset: -8
813 * c-continued-statement-offset: 8
814 * c-continued-brace-offset: 0
815 * End:
816 */
![[top]](../icons/top.png){kind=icon}
![[bottom]](../icons/n_bottom.png){kind=icon}
*/