tag | line | file | source code |
io | 549 | drivers/block/ide-tape.c | unsigned io :1; /* The device requests us to read (1) or write (0) */ |
io | 1546 | drivers/block/ide-tape.c | if (!ireason.b.cod || ireason.b.io) { |
io | 1665 | drivers/block/ide-tape.c | if (ireason.b.io != !(pc->writing)) { /* Hopefully, we will never get here */ |
io | 1667 | drivers/block/ide-tape.c | printk ("but the tape wants us to %s !\n",ireason.b.io ? "Read":"Write"); |
io | 156 | drivers/cdrom/isp16.c | u_char io; |
io | 173 | drivers/cdrom/isp16.c | io = ISP16_IN( ISP16_IO_SET_PORT ) & 0x03; |
io | 174 | drivers/cdrom/isp16.c | if ( ((io&0x01)<<1) == (io&0x02) ) { /* bits are the same */ |
io | 175 | drivers/cdrom/isp16.c | if ( io == 0 ) { /* ...the same and 0 */ |
io | 110 | drivers/cdrom/optcd_isp16.h | u_char io; |
io | 127 | drivers/cdrom/optcd_isp16.h | io = ISP16_IN( ISP16_IO_SET_PORT ) & 0x03; |
io | 128 | drivers/cdrom/optcd_isp16.h | if ( ((io&0x01)<<1) == (io&0x02) ) { /* bits are the same */ |
io | 129 | drivers/cdrom/optcd_isp16.h | if ( io == 0 ) { /* ...the same and 0 */ |
io | 595 | drivers/char/lp.c | static int io[] = {0, 0, 0}; |
io | 616 | drivers/char/lp.c | if (io[offset] != 0) { |
io | 617 | drivers/char/lp.c | LP_B(offset) = io[offset]; |
io | 27 | drivers/char/wd501p.h | #define WDT_COUNT0 (io+0) |
io | 28 | drivers/char/wd501p.h | #define WDT_COUNT1 (io+1) |
io | 29 | drivers/char/wd501p.h | #define WDT_COUNT2 (io+2) |
io | 30 | drivers/char/wd501p.h | #define WDT_CR (io+3) |
io | 31 | drivers/char/wd501p.h | #define WDT_SR (io+4) |
io | 32 | drivers/char/wd501p.h | #define WDT_RT (io+5) |
io | 33 | drivers/char/wd501p.h | #define WDT_UNUSED (io+6) |
io | 34 | drivers/char/wd501p.h | #define WDT_DC (io+7) |
io | 45 | drivers/char/wdt.c | int io=0x240; |
io | 236 | drivers/char/wdt.c | printk("WDT501-P module at %X(Interrupt %d)\n", io,irq); |
io | 246 | drivers/char/wdt.c | request_region(io, 8, "wdt501"); |
io | 256 | drivers/char/wdt.c | release_region(io,8); |
io | 264 | drivers/char/wdt.c | printk("WDT500/501-P driver at %X(Interrupt %d)\n", io,irq); |
io | 274 | drivers/char/wdt.c | request_region(io, 8, "wdt501"); |
io | 17 | drivers/isdn/teles/mod.c | io_type io[] = |
io | 62 | drivers/isdn/teles/mod.c | io[i].iobase = ints[j]; |
io | 66 | drivers/isdn/teles/mod.c | io[i].interrupt = ints[j]; |
io | 70 | drivers/isdn/teles/mod.c | io[i].membase = (byte *)ints[j]; |
io | 74 | drivers/isdn/teles/mod.c | io[i].protocol = ints[j]; |
io | 93 | drivers/isdn/teles/mod.c | if (io[i].protocol) { |
io | 94 | drivers/isdn/teles/mod.c | cards[i].membase = io[i].membase; |
io | 95 | drivers/isdn/teles/mod.c | cards[i].interrupt = io[i].interrupt; |
io | 96 | drivers/isdn/teles/mod.c | cards[i].iobase = io[i].iobase; |
io | 97 | drivers/isdn/teles/mod.c | cards[i].protocol = io[i].protocol; |
io | 819 | drivers/net/3c501.c | static int io=0x280; |
io | 825 | drivers/net/3c501.c | dev_3c501.base_addr=io; |
io | 634 | drivers/net/3c503.c | static int io[MAX_EL2_CARDS] = { 0, }; |
io | 649 | drivers/net/3c503.c | dev->base_addr = io[this_dev]; |
io | 652 | drivers/net/3c503.c | if (io[this_dev] == 0) { |
io | 657 | drivers/net/3c503.c | printk(KERN_WARNING "3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]); |
io | 1488 | drivers/net/3c505.c | int io = 0x300; |
io | 1493 | drivers/net/3c505.c | if (io == 0) |
io | 1495 | drivers/net/3c505.c | dev_3c505.base_addr = io; |
io | 886 | drivers/net/3c507.c | static int io = 0x300; |
io | 891 | drivers/net/3c507.c | if (io == 0) |
io | 893 | drivers/net/3c507.c | dev_3c507.base_addr = io; |
io | 711 | drivers/net/3c509.c | static int io = 0; |
io | 717 | drivers/net/3c509.c | dev_3c509.base_addr = io; |
io | 719 | drivers/net/3c509.c | if (!EISA_bus && !io) { |
io | 329 | drivers/net/ac3200.c | static int io[MAX_AC32_CARDS] = { 0, }; |
io | 342 | drivers/net/ac3200.c | dev->base_addr = io[this_dev]; |
io | 346 | drivers/net/ac3200.c | if (io[this_dev] == 0 && this_dev != 0) break; |
io | 348 | drivers/net/ac3200.c | printk(KERN_WARNING "ac3200.c: No ac3200 card found (i/o = 0x%x).\n", io[this_dev]); |
io | 1017 | drivers/net/apricot.c | static int io = 0x300; |
io | 1023 | drivers/net/apricot.c | dev_apricot.base_addr = io; |
io | 3197 | drivers/net/arcnet.c | static int io=0x0; /* <--- EDIT THESE LINES FOR YOUR CONFIGURATION */ |
io | 3212 | drivers/net/arcnet.c | thiscard.base_addr=io; |
io | 639 | drivers/net/at1700.c | static int io = 0x260; |
io | 644 | drivers/net/at1700.c | if (io == 0) |
io | 646 | drivers/net/at1700.c | dev_at1700.base_addr = io; |
io | 3783 | drivers/net/de4x5.c | static int io=0x0b; /* EDIT THESE LINES FOR YOUR CONFIGURATION */ |
io | 3790 | drivers/net/de4x5.c | thisDE4X5.base_addr = io; /* Now autoprobe the module */ |
io | 3797 | drivers/net/de4x5.c | io=0; |
io | 189 | drivers/net/de620.c | static int io = DE620_IO; |
io | 842 | drivers/net/de620.c | dev->base_addr = io; |
io | 1865 | drivers/net/depca.c | static int io=0x200; /* Or use the irq= io= options to insmod */ |
io | 1872 | drivers/net/depca.c | thisDepca.base_addr=io; |
io | 396 | drivers/net/e2100.c | static int io[MAX_E21_CARDS] = { 0, }; |
io | 412 | drivers/net/e2100.c | dev->base_addr = io[this_dev]; |
io | 416 | drivers/net/e2100.c | if (io[this_dev] == 0) { |
io | 421 | drivers/net/e2100.c | printk(KERN_WARNING "e2100.c: No E2100 card found (i/o = 0x%x).\n", io[this_dev]); |
io | 1143 | drivers/net/eepro.c | static int io = 0x200; |
io | 1149 | drivers/net/eepro.c | if (io == 0) |
io | 1151 | drivers/net/eepro.c | dev_eepro.base_addr = io; |
io | 1231 | drivers/net/eexpress.c | int io[EEXP_MAX_CARDS] = {0, }; |
io | 1245 | drivers/net/eexpress.c | dev->base_addr = io[this_dev]; |
io | 1246 | drivers/net/eexpress.c | if (io[this_dev] == 0) { |
io | 1251 | drivers/net/eexpress.c | printk(KERN_WARNING "eexpress.c: Failed to register card at 0x%x.\n", io[this_dev]); |
io | 1186 | drivers/net/eth16i.c | int io = 0x2a0; |
io | 1191 | drivers/net/eth16i.c | if(io == 0) |
io | 1194 | drivers/net/eth16i.c | dev_eth16i.base_addr = io; |
io | 1899 | drivers/net/ewrk3.c | static int io=0x300; /* <--- EDIT THESE LINES FOR YOUR CONFIGURATION */ |
io | 1905 | drivers/net/ewrk3.c | thisEthwrk.base_addr=io; |
io | 626 | drivers/net/fmv18x.c | static int io = 0x220; |
io | 631 | drivers/net/fmv18x.c | if (io == 0) |
io | 633 | drivers/net/fmv18x.c | dev_fmv18x.base_addr = io; |
io | 425 | drivers/net/hp-plus.c | static int io[MAX_HPP_CARDS] = { 0, }; |
io | 439 | drivers/net/hp-plus.c | dev->base_addr = io[this_dev]; |
io | 441 | drivers/net/hp-plus.c | if (io[this_dev] == 0) { |
io | 446 | drivers/net/hp-plus.c | printk(KERN_WARNING "hp-plus.c: No HP-Plus card found (i/o = 0x%x).\n", io[this_dev]); |
io | 392 | drivers/net/hp.c | static int io[MAX_HP_CARDS] = { 0, }; |
io | 406 | drivers/net/hp.c | dev->base_addr = io[this_dev]; |
io | 408 | drivers/net/hp.c | if (io[this_dev] == 0) { |
io | 413 | drivers/net/hp.c | printk(KERN_WARNING "hp.c: No HP card found (i/o = 0x%x).\n", io[this_dev]); |
io | 1347 | drivers/net/ibmtr.c | static int io = 0xa20; |
io | 1351 | drivers/net/ibmtr.c | if (io == 0) |
io | 1353 | drivers/net/ibmtr.c | dev_ibmtr.base_addr = io; |
io | 673 | drivers/net/ne.c | static int io[MAX_NE_CARDS] = { 0, }; |
io | 690 | drivers/net/ne.c | dev->base_addr = io[this_dev]; |
io | 692 | drivers/net/ne.c | if (io[this_dev] == 0) { |
io | 698 | drivers/net/ne.c | printk(KERN_WARNING "ne.c: No NE*000 card found (i/o = 0x%x).\n", io[this_dev]); |
io | 1317 | drivers/net/ni52.c | int io=0x300; |
io | 1323 | drivers/net/ni52.c | if(io <= 0x0 || !memend || !memstart || irq < 2) { |
io | 1328 | drivers/net/ni52.c | dev_ni52.base_addr = io; |
io | 1057 | drivers/net/plip.c | static int io[] = {0, 0, 0}; |
io | 1092 | drivers/net/plip.c | if (io[i] != 0) { |
io | 1093 | drivers/net/plip.c | dev_plip[i].base_addr = io[i]; |
io | 582 | drivers/net/skeleton.c | static int io = 0x300; |
io | 591 | drivers/net/skeleton.c | if (io == 0) |
io | 596 | drivers/net/skeleton.c | this_device.base_addr = io; |
io | 360 | drivers/net/smc-ultra.c | static int io[MAX_ULTRA_CARDS] = { 0, }; |
io | 374 | drivers/net/smc-ultra.c | dev->base_addr = io[this_dev]; |
io | 376 | drivers/net/smc-ultra.c | if (io[this_dev] == 0) { |
io | 381 | drivers/net/smc-ultra.c | printk(KERN_WARNING "smc-ultra.c: No SMC Ultra card found (i/o = 0x%x).\n", io[this_dev]); |
io | 1743 | drivers/net/smc9194.c | int io = 0; |
io | 1751 | drivers/net/smc9194.c | if (io == 0) |
io | 1756 | drivers/net/smc9194.c | devSMC9194.base_addr = io; |
io | 749 | drivers/net/tulip.c | static int io = 0; |
io | 757 | drivers/net/tulip.c | if (io == 0) |
io | 759 | drivers/net/tulip.c | dev_tulip.base_addr = io; |
io | 2178 | drivers/net/wavelan.c | static int io = 0x390; /* Default from above.. */ |
io | 2184 | drivers/net/wavelan.c | dev_wavelan.base_addr = io; |
io | 450 | drivers/net/wd.c | static int io[MAX_WD_CARDS] = { 0, }; |
io | 466 | drivers/net/wd.c | dev->base_addr = io[this_dev]; |
io | 470 | drivers/net/wd.c | if (io[this_dev] == 0) { |
io | 475 | drivers/net/wd.c | printk(KERN_WARNING "wd.c: No wd80x3 card found (i/o = 0x%x).\n", io[this_dev]); |