root/drivers/net/eepro.c

/* [previous][next][first][last][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. eepro_probe
  2. eepro_probe1
  3. eepro_grab_irq
  4. eepro_open
  5. eepro_send_packet
  6. eepro_interrupt
  7. eepro_close
  8. eepro_get_stats
  9. set_multicast_list
  10. read_eeprom
  11. hardware_send_packet
  12. eepro_rx
  13. eepro_transmit_interrupt
  14. init_module
  15. cleanup_module

   1 /* eepro.c: Intel EtherExpress Pro/10 device driver for Linux. */
   2 /*
   3         Written 1994, 1995 by Bao C. Ha.
   4 
   5         Copyright (C) 1994, 1995 by Bao C. Ha.
   6 
   7         This software may be used and distributed
   8         according to the terms of the GNU Public License,
   9         incorporated herein by reference.
  10 
  11         The author may be reached at bao@saigon.async.com 
  12         or 418 Hastings Place, Martinez, GA 30907.
  13 
  14         Things remaining to do:
  15         Better record keeping of errors.
  16         Eliminate transmit interrupt to reduce overhead.
  17         Implement "concurrent processing". I won't be doing it!
  18         Allow changes to the partition of the transmit and receive
  19         buffers, currently the ratio is 3:1 of receive to transmit
  20         buffer ratio.  
  21 
  22         Bugs:
  23 
  24         If you have a problem of not detecting the 82595 during a
  25         reboot (warm reset), disable the FLASH memory should fix it.
  26         This is a compatibility hardware problem.
  27         
  28         Versions:
  29 
  30         0.07a   Fix a stat report which counts every packet as a
  31                 heart-beat failure. (BCH, 6/3/95)
  32 
  33         0.07    Modified to support all other 82595-based lan cards.  
  34                 The IRQ vector of the EtherExpress Pro will be set
  35                 according to the value saved in the EEPROM.  For other
  36                 cards, I will do autoirq_request() to grab the next
  37                 available interrupt vector. (BCH, 3/17/95)
  38 
  39         0.06a,b Interim released.  Minor changes in the comments and
  40                 print out format. (BCH, 3/9/95 and 3/14/95)
  41 
  42         0.06    First stable release that I am comfortable with. (BCH,
  43                 3/2/95) 
  44 
  45         0.05    Complete testing of multicast. (BCH, 2/23/95)   
  46 
  47         0.04    Adding multicast support. (BCH, 2/14/95)        
  48 
  49         0.03    First widely alpha release for public testing. 
  50                 (BCH, 2/14/95)  
  51 
  52 */
  53 
  54 static char *version =
  55         "eepro.c: v0.07a 6/5/95 Bao C. Ha (bao@saigon.async.com)\n";
  56 
  57 /* Always include 'config.h' first in case the user wants to turn on
  58    or override something. */
  59 #include <linux/config.h>
  60 
  61 #ifdef MODULE
  62 #include <linux/module.h>
  63 #include <linux/version.h>
  64 #endif
  65 
  66 /*
  67   Sources:
  68 
  69         This driver wouldn't have been written without the availability 
  70         of the Crynwr's Lan595 driver source code.  It helps me to 
  71         familiarize with the 82595 chipset while waiting for the Intel 
  72         documentation.  I also learned how to detect the 82595 using 
  73         the packet driver's technique.
  74 
  75         This driver is written by cutting and pasting the skeleton.c driver
  76         provided by Donald Becker.  I also borrowed the EEPROM routine from
  77         Donald Becker's 82586 driver.
  78 
  79         Datasheet for the Intel 82595. It provides just enough info that 
  80         the casual reader might think that it documents the i82595.
  81 
  82         The User Manual for the 82595.  It provides a lot of the missing
  83         information.
  84 
  85 */
  86 
  87 #include <linux/kernel.h>
  88 #include <linux/sched.h>
  89 #include <linux/types.h>
  90 #include <linux/fcntl.h>
  91 #include <linux/interrupt.h>
  92 #include <linux/ptrace.h>
  93 #include <linux/ioport.h>
  94 #include <linux/in.h>
  95 #include <linux/malloc.h>
  96 #include <linux/string.h>
  97 #include <asm/system.h>
  98 #include <asm/bitops.h>
  99 #include <asm/io.h>
 100 #include <asm/dma.h>
 101 #include <linux/errno.h>
 102 
 103 #include <linux/netdevice.h>
 104 #include <linux/etherdevice.h>
 105 #include <linux/skbuff.h>
 106 extern struct device *init_etherdev(struct device *dev, int sizeof_private,
 107                                                 unsigned long *mem_startp);
 108 
 109 /* First, a few definitions that the brave might change. */
 110 /* A zero-terminated list of I/O addresses to be probed. */
 111 static unsigned int eepro_portlist[] =
 112    { 0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0x360, 0};
 113 
 114 /* use 0 for production, 1 for verification, >2 for debug */
 115 #ifndef NET_DEBUG
 116 #define NET_DEBUG 2
 117 #endif
 118 static unsigned int net_debug = NET_DEBUG;
 119 
 120 /* The number of low I/O ports used by the ethercard. */
 121 #define EEPRO_IO_EXTENT 16
 122 
 123 /* Information that need to be kept for each board. */
 124 struct eepro_local {
 125         struct enet_statistics stats;
 126         unsigned rx_start;
 127         unsigned tx_start; /* start of the transmit chain */
 128         int tx_last;  /* pointer to last packet in the transmit chain */
 129         unsigned tx_end;   /* end of the transmit chain (plus 1) */
 130         int eepro;      /* a flag, TRUE=1 for the EtherExpress Pro/10,
 131                            FALSE = 0 for other 82595-based lan cards. */
 132 };
 133 
 134 /* The station (ethernet) address prefix, used for IDing the board. */
 135 #define SA_ADDR0 0x00
 136 #define SA_ADDR1 0xaa
 137 #define SA_ADDR2 0x00
 138 
 139 /* Index to functions, as function prototypes. */
 140 
 141 extern int eepro_probe(struct device *dev);     
 142 
 143 static int      eepro_probe1(struct device *dev, short ioaddr);
 144 static int      eepro_open(struct device *dev);
 145 static int      eepro_send_packet(struct sk_buff *skb, struct device *dev);
 146 static void     eepro_interrupt(int irq, struct pt_regs *regs);
 147 static void     eepro_rx(struct device *dev);
 148 static void     eepro_transmit_interrupt(struct device *dev);
 149 static int      eepro_close(struct device *dev);
 150 static struct enet_statistics *eepro_get_stats(struct device *dev);
 151 static void set_multicast_list(struct device *dev, int num_addrs, void *addrs);
 152 
 153 static int read_eeprom(int ioaddr, int location);
 154 static void hardware_send_packet(struct device *dev, void *buf, short length);
 155 static int      eepro_grab_irq(struct device *dev);
 156 
 157 /*
 158                         Details of the i82595.
 159 
 160 You will need either the datasheet or the user manual to understand what
 161 is going on here.  The 82595 is very different from the 82586, 82593.
 162 
 163 The receive algorithm in eepro_rx() is just an implementation of the
 164 RCV ring structure that the Intel 82595 imposes at the hardware level.
 165 The receive buffer is set at 24K, and the transmit buffer is 8K.  I
 166 am assuming that the total buffer memory is 32K, which is true for the
 167 Intel EtherExpress Pro/10.  If it is less than that on a generic card,
 168 the driver will be broken.
 169 
 170 The transmit algorithm in the hardware_send_packet() is similar to the
 171 one in the eepro_rx().  The transmit buffer is a ring linked list.
 172 I just queue the next available packet to the end of the list.  In my
 173 system, the 82595 is so fast that the list seems to always contain a
 174 single packet.  In other systems with faster computers and more congested
 175 network traffics, the ring linked list should improve performance by
 176 allowing up to 8K worth of packets to be queued.
 177 
 178 */
 179 #define RAM_SIZE        0x8000
 180 #define RCV_HEADER      8
 181 #define RCV_RAM         0x6000  /* 24KB for RCV buffer */
 182 #define RCV_LOWER_LIMIT 0x00    /* 0x0000 */
 183 #define RCV_UPPER_LIMIT ((RCV_RAM - 2) >> 8)    /* 0x5ffe */
 184 #define XMT_RAM         (RAM_SIZE - RCV_RAM)    /* 8KB for XMT buffer */
 185 #define XMT_LOWER_LIMIT (RCV_RAM >> 8)  /* 0x6000 */
 186 #define XMT_UPPER_LIMIT ((RAM_SIZE - 2) >> 8)   /* 0x7ffe */
 187 #define XMT_HEADER      8
 188 
 189 #define RCV_DONE        0x0008
 190 #define RX_OK           0x2000
 191 #define RX_ERROR        0x0d81
 192 
 193 #define TX_DONE_BIT     0x0080
 194 #define CHAIN_BIT       0x8000
 195 #define XMT_STATUS      0x02
 196 #define XMT_CHAIN       0x04
 197 #define XMT_COUNT       0x06
 198 
 199 #define BANK0_SELECT    0x00            
 200 #define BANK1_SELECT    0x40            
 201 #define BANK2_SELECT    0x80            
 202 
 203 /* Bank 0 registers */
 204 #define COMMAND_REG     0x00    /* Register 0 */
 205 #define MC_SETUP        0x03
 206 #define XMT_CMD         0x04
 207 #define DIAGNOSE_CMD    0x07
 208 #define RCV_ENABLE_CMD  0x08
 209 #define RCV_DISABLE_CMD 0x0a
 210 #define STOP_RCV_CMD    0x0b
 211 #define RESET_CMD       0x0e
 212 #define POWER_DOWN_CMD  0x18
 213 #define RESUME_XMT_CMD  0x1c
 214 #define SEL_RESET_CMD   0x1e
 215 #define STATUS_REG      0x01    /* Register 1 */
 216 #define RX_INT          0x02
 217 #define TX_INT          0x04
 218 #define EXEC_STATUS     0x30
 219 #define ID_REG          0x02    /* Register 2   */
 220 #define R_ROBIN_BITS    0xc0    /* round robin counter */
 221 #define ID_REG_MASK     0x2c
 222 #define ID_REG_SIG      0x24
 223 #define AUTO_ENABLE     0x10
 224 #define INT_MASK_REG    0x03    /* Register 3   */
 225 #define RX_STOP_MASK    0x01
 226 #define RX_MASK         0x02
 227 #define TX_MASK         0x04
 228 #define EXEC_MASK       0x08
 229 #define ALL_MASK        0x0f
 230 #define RCV_BAR         0x04    /* The following are word (16-bit) registers */
 231 #define RCV_STOP        0x06
 232 #define XMT_BAR         0x0a
 233 #define HOST_ADDRESS_REG        0x0c
 234 #define IO_PORT         0x0e
 235 
 236 /* Bank 1 registers */
 237 #define REG1    0x01
 238 #define WORD_WIDTH      0x02
 239 #define INT_ENABLE      0x80
 240 #define INT_NO_REG      0x02
 241 #define RCV_LOWER_LIMIT_REG     0x08
 242 #define RCV_UPPER_LIMIT_REG     0x09
 243 #define XMT_LOWER_LIMIT_REG     0x0a
 244 #define XMT_UPPER_LIMIT_REG     0x0b
 245 
 246 /* Bank 2 registers */
 247 #define XMT_Chain_Int   0x20    /* Interrupt at the end of the transmit chain */
 248 #define XMT_Chain_ErrStop       0x40 /* Interrupt at the end of the chain even if there are errors */
 249 #define RCV_Discard_BadFrame    0x80 /* Throw bad frames away, and continue to receive others */
 250 #define REG2            0x02
 251 #define PRMSC_Mode      0x01
 252 #define Multi_IA        0x20
 253 #define REG3            0x03
 254 #define TPE_BIT         0x04
 255 #define BNC_BIT         0x20
 256         
 257 #define I_ADD_REG0      0x04
 258 #define I_ADD_REG1      0x05
 259 #define I_ADD_REG2      0x06
 260 #define I_ADD_REG3      0x07
 261 #define I_ADD_REG4      0x08
 262 #define I_ADD_REG5      0x09
 263 
 264 #define EEPROM_REG 0x0a
 265 #define EESK 0x01
 266 #define EECS 0x02
 267 #define EEDI 0x04
 268 #define EEDO 0x08
 269 
 270 
 271 /* Check for a network adaptor of this type, and return '0' iff one exists.
 272    If dev->base_addr == 0, probe all likely locations.
 273    If dev->base_addr == 1, always return failure.
 274    If dev->base_addr == 2, allocate space for the device and return success
 275    (detachable devices only).
 276    */
 277 #ifdef HAVE_DEVLIST
 278 /* Support for a alternate probe manager, which will eliminate the
 279    boilerplate below. */
 280 struct netdev_entry netcard_drv =
 281 {"eepro", eepro_probe1, EEPRO_IO_EXTENT, eepro_portlist};
 282 #else
 283 int
 284 eepro_probe(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 285 {
 286         int i;
 287         int base_addr = dev ? dev->base_addr : 0;
 288 
 289         if (base_addr > 0x1ff)          /* Check a single specified location. */
 290                 return eepro_probe1(dev, base_addr);
 291         else if (base_addr != 0)        /* Don't probe at all. */
 292                 return ENXIO;
 293 
 294         for (i = 0; eepro_portlist[i]; i++) {
 295                 int ioaddr = eepro_portlist[i];
 296                 if (check_region(ioaddr, EEPRO_IO_EXTENT))
 297                         continue;
 298                 if (eepro_probe1(dev, ioaddr) == 0)
 299                         return 0;
 300         }
 301 
 302         return ENODEV;
 303 }
 304 #endif
 305 
 306 /* This is the real probe routine.  Linux has a history of friendly device
 307    probes on the ISA bus.  A good device probes avoids doing writes, and
 308    verifies that the correct device exists and functions.  */
 309 
 310 int eepro_probe1(struct device *dev, short ioaddr)
     /* [previous][next][first][last][top][bottom][index][help] */
 311 {
 312         unsigned short station_addr[6], id, counter;
 313         int i;
 314         int eepro;      /* a flag, TRUE=1 for the EtherExpress Pro/10,
 315                            FALSE = 0 for other 82595-based lan cards. */
 316         char *ifmap[] = {"AUI", "10Base2", "10BaseT"};
 317         enum iftype { AUI=0, BNC=1, TPE=2 };
 318 
 319         /* Now, we are going to check for the signature of the
 320            ID_REG (register 2 of bank 0) */
 321 
 322         if (((id=inb(ioaddr + ID_REG)) & ID_REG_MASK) == ID_REG_SIG) {
 323 
 324                 /* We seem to have the 82595 signature, let's
 325                    play with its counter (last 2 bits of
 326                    register 2 of bank 0) to be sure. */
 327         
 328                 counter = (id & R_ROBIN_BITS);  
 329                 if (((id=inb(ioaddr+ID_REG)) & R_ROBIN_BITS) == 
 330                         (counter + 0x40)) {
 331 
 332                         /* Yes, the 82595 has been found */
 333 
 334                         /* Now, get the ethernet hardware address from
 335                            the EEPROM */
 336 
 337                         station_addr[0] = read_eeprom(ioaddr, 2);
 338                         station_addr[1] = read_eeprom(ioaddr, 3);
 339                         station_addr[2] = read_eeprom(ioaddr, 4);
 340 
 341                         /* Check the station address for the manufacturer's code */
 342 
 343                         if (station_addr[2] != 0x00aa || (station_addr[1] & 0xff00) != 0x0000) {
 344                                 eepro = 0;
 345                                 printk("%s: Intel 82595-based lan card at %#x,", 
 346                                         dev->name, ioaddr);
 347                         }
 348                         else {
 349                                 eepro = 1;
 350                                 printk("%s: Intel EtherExpress Pro/10 at %#x,", 
 351                                         dev->name, ioaddr);
 352                         }
 353 
 354                         /* Fill in the 'dev' fields. */
 355                         dev->base_addr = ioaddr;
 356                         
 357                         for (i=0; i < 6; i++) {
 358                                 dev->dev_addr[i] = ((unsigned char *) station_addr)[5-i];
 359                                 printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]);
 360                         }
 361                                 
 362                         outb(BANK2_SELECT, ioaddr); /* be CAREFULL, BANK 2 now */
 363                         id = inb(ioaddr + REG3);
 364                         if (id & TPE_BIT)
 365                                 dev->if_port = TPE;
 366                         else dev->if_port = BNC;
 367 
 368                         if (dev->irq < 2 && eepro) {
 369                                 i = read_eeprom(ioaddr, 1);
 370                                 switch (i & 0x07) {
 371                                         case 0: dev->irq = 9; break;
 372                                         case 1: dev->irq = 3; break;
 373                                         case 2: dev->irq = 5; break;
 374                                         case 3: dev->irq = 10; break;
 375                                         case 4: dev->irq = 11; break;
 376                                         default: /* should never get here !!!!! */
 377                                                 printk(" illegal interrupt vector stored in EEPROM.\n");
 378                                                 return ENODEV;
 379                                         }
 380                                 }
 381                         else if (dev->irq == 2)
 382                                 dev->irq = 9;
 383 
 384                         if (dev->irq > 2) {
 385                                 printk(", IRQ %d, %s.\n", dev->irq,
 386                                                 ifmap[dev->if_port]);
 387                                 if (request_irq(dev->irq, &eepro_interrupt, 0, "eepro")) {
 388                                         printk("%s: unable to get IRQ %d.\n", dev->name, dev->irq);
 389                                         return -EAGAIN;
 390                                 }
 391                         }
 392                         else printk(", %s.\n", ifmap[dev->if_port]);
 393                         
 394                         if ((dev->mem_start & 0xf) > 0)
 395                                 net_debug = dev->mem_start & 7;
 396 
 397                         if (net_debug > 3) {
 398                                 i = read_eeprom(ioaddr, 5);
 399                                 if (i & 0x2000) /* bit 13 of EEPROM word 5 */
 400                                         printk("%s: Concurrent Processing is enabled but not used!\n",
 401                                                 dev->name);
 402                         }
 403 
 404                         if (net_debug) 
 405                                 printk(version);
 406 
 407                         /* Grab the region so we can find another board if autoIRQ fails. */
 408                         request_region(ioaddr, EEPRO_IO_EXTENT,"eepro");
 409 
 410                         /* Initialize the device structure */
 411                         if (dev->priv == NULL)
 412                                 dev->priv = kmalloc(sizeof(struct eepro_local), GFP_KERNEL);
 413                         memset(dev->priv, 0, sizeof(struct eepro_local));
 414 
 415                         dev->open = eepro_open;
 416                         dev->stop = eepro_close;
 417                         dev->hard_start_xmit = eepro_send_packet;
 418                         dev->get_stats = eepro_get_stats;
 419                         dev->set_multicast_list = &set_multicast_list;
 420 
 421                         /* Fill in the fields of the device structure with
 422                            ethernet generic values */
 423 
 424                         ether_setup(dev);
 425 
 426                         outb(RESET_CMD, ioaddr); /* RESET the 82595 */
 427 
 428                         return 0;
 429                         }
 430                 else return ENODEV;
 431                 }
 432         else if (net_debug > 3)
 433                 printk ("EtherExpress Pro probed failed!\n");
 434         return ENODEV;
 435 }
 436 
 437 /* Open/initialize the board.  This is called (in the current kernel)
 438    sometime after booting when the 'ifconfig' program is run.
 439 
 440    This routine should set everything up anew at each open, even
 441    registers that "should" only need to be set once at boot, so that
 442    there is non-reboot way to recover if something goes wrong.
 443    */
 444 
 445 static char irqrmap[] = {-1,-1,0,1,-1,2,-1,-1,-1,0,3,4,-1,-1,-1,-1};
 446 static int      eepro_grab_irq(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 447 {
 448         int irqlist[] = { 5, 9, 10, 11, 4, 3, 0};       
 449         int *irqp = irqlist, temp_reg, ioaddr = dev->base_addr;
 450 
 451         outb(BANK1_SELECT, ioaddr); /* be CAREFULL, BANK 1 now */
 452 
 453         /* Enable the interrupt line. */
 454         temp_reg = inb(ioaddr + REG1);
 455         outb(temp_reg | INT_ENABLE, ioaddr + REG1); 
 456         
 457         outb(BANK0_SELECT, ioaddr); /* be CAREFULL, BANK 0 now */
 458 
 459         /* clear all interrupts */
 460         outb(ALL_MASK, ioaddr + STATUS_REG); 
 461         /* Let EXEC event to interrupt */
 462         outb(ALL_MASK & ~(EXEC_MASK), ioaddr + INT_MASK_REG); 
 463 
 464         do {
 465                 outb(BANK1_SELECT, ioaddr); /* be CAREFULL, BANK 1 now */
 466 
 467                 temp_reg = inb(ioaddr + INT_NO_REG);
 468                 outb((temp_reg & 0xf8) | irqrmap[*irqp], ioaddr + INT_NO_REG); 
 469 
 470                 outb(BANK0_SELECT, ioaddr); /* Switch back to Bank 0 */
 471 
 472                 if (request_irq (*irqp, NULL, 0, "bogus") != EBUSY) {
 473                         /* Twinkle the interrupt, and check if it's seen */
 474                         autoirq_setup(0);
 475 
 476                         outb(DIAGNOSE_CMD, ioaddr); /* RESET the 82595 */
 477                                 
 478                         if (*irqp == autoirq_report(2) &&  /* It's a good IRQ line */
 479                                 (request_irq(dev->irq = *irqp, &eepro_interrupt, 0, "eepro") == 0)) 
 480                                         break;
 481 
 482                         /* clear all interrupts */
 483                         outb(ALL_MASK, ioaddr + STATUS_REG); 
 484                 }
 485         } while (*++irqp);
 486 
 487         outb(BANK1_SELECT, ioaddr); /* Switch back to Bank 1 */
 488 
 489         /* Disable the physical interrupt line. */
 490         temp_reg = inb(ioaddr + REG1);
 491         outb(temp_reg & 0x7f, ioaddr + REG1); 
 492 
 493         outb(BANK0_SELECT, ioaddr); /* Switch back to Bank 0 */
 494 
 495         /* Mask all the interrupts. */
 496         outb(ALL_MASK, ioaddr + INT_MASK_REG); 
 497 
 498         /* clear all interrupts */
 499         outb(ALL_MASK, ioaddr + STATUS_REG); 
 500 
 501         return dev->irq;
 502 }
 503 
 504 static int
 505 eepro_open(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 506 {
 507         unsigned short temp_reg;
 508         int i, ioaddr = dev->base_addr;
 509         struct eepro_local *lp = (struct eepro_local *)dev->priv;
 510 
 511         if (net_debug > 3)
 512                 printk("eepro: entering eepro_open routine.\n");
 513 
 514         if (dev->dev_addr[0] == SA_ADDR0 &&
 515                         dev->dev_addr[1] == SA_ADDR1 &&
 516                         dev->dev_addr[2] == SA_ADDR2)
 517                 lp->eepro = 1; /* Yes, an Intel EtherExpress Pro/10 */
 518         else lp->eepro = 0; /* No, it is a generic 82585 lan card */
 519 
 520         /* Get the interrupt vector for the 82595 */    
 521         if (dev->irq < 2 && eepro_grab_irq(dev) == 0) {
 522                 printk("%s: unable to get IRQ %d.\n", dev->name, dev->irq);
 523                 return -EAGAIN;
 524         }
 525                                 
 526         if (irq2dev_map[dev->irq] != 0
 527                 || (irq2dev_map[dev->irq] = dev) == 0)
 528                 return -EAGAIN;
 529 
 530         /* Initialize the 82595. */
 531 
 532         outb(BANK2_SELECT, ioaddr); /* be CAREFULL, BANK 2 now */
 533         temp_reg = inb(ioaddr + EEPROM_REG);
 534         if (temp_reg & 0x10) /* Check the TurnOff Enable bit */
 535                 outb(temp_reg & 0xef, ioaddr + EEPROM_REG);
 536         for (i=0; i < 6; i++) 
 537                 outb(dev->dev_addr[i] , ioaddr + I_ADD_REG0 + i); 
 538                         
 539         temp_reg = inb(ioaddr + REG1);    /* Setup Transmit Chaining */
 540         outb(temp_reg | XMT_Chain_Int | XMT_Chain_ErrStop /* and discard bad RCV frames */
 541                 | RCV_Discard_BadFrame, ioaddr + REG1);  
 542 
 543         temp_reg = inb(ioaddr + REG2); /* Match broadcast */
 544         outb(temp_reg | 0x14, ioaddr + REG2);
 545 
 546         temp_reg = inb(ioaddr + REG3);
 547         outb(temp_reg & 0x3f, ioaddr + REG3); /* clear test mode */
 548 
 549         /* Set the receiving mode */
 550         outb(BANK1_SELECT, ioaddr); /* be CAREFULL, BANK 1 now */
 551         
 552         temp_reg = inb(ioaddr + INT_NO_REG);
 553         outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG); 
 554 
 555         /* Initialize the RCV and XMT upper and lower limits */
 556         outb(RCV_LOWER_LIMIT, ioaddr + RCV_LOWER_LIMIT_REG); 
 557         outb(RCV_UPPER_LIMIT, ioaddr + RCV_UPPER_LIMIT_REG); 
 558         outb(XMT_LOWER_LIMIT, ioaddr + XMT_LOWER_LIMIT_REG); 
 559         outb(XMT_UPPER_LIMIT, ioaddr + XMT_UPPER_LIMIT_REG); 
 560 
 561         /* Enable the interrupt line. */
 562         temp_reg = inb(ioaddr + REG1);
 563         outb(temp_reg | INT_ENABLE, ioaddr + REG1); 
 564 
 565         outb(BANK0_SELECT, ioaddr); /* Switch back to Bank 0 */
 566 
 567         /* Let RX and TX events to interrupt */
 568         outb(ALL_MASK & ~(RX_MASK | TX_MASK), ioaddr + INT_MASK_REG); 
 569         /* clear all interrupts */
 570         outb(ALL_MASK, ioaddr + STATUS_REG); 
 571 
 572         /* Initialize RCV */
 573         outw(RCV_LOWER_LIMIT << 8, ioaddr + RCV_BAR); 
 574         lp->rx_start = (RCV_LOWER_LIMIT << 8) ;
 575         outw((RCV_UPPER_LIMIT << 8) | 0xfe, ioaddr + RCV_STOP); 
 576 
 577         /* Initialize XMT */
 578         outw(XMT_LOWER_LIMIT << 8, ioaddr + XMT_BAR); 
 579         
 580         outb(SEL_RESET_CMD, ioaddr);
 581         /* We are supposed to wait for 2 us after a SEL_RESET */
 582         SLOW_DOWN_IO;
 583         SLOW_DOWN_IO;   
 584 
 585         lp->tx_start = lp->tx_end = XMT_LOWER_LIMIT << 8; /* or = RCV_RAM */
 586         lp->tx_last = 0;  
 587         
 588         dev->tbusy = 0;
 589         dev->interrupt = 0;
 590         dev->start = 1;
 591 
 592         if (net_debug > 3)
 593                 printk("eepro: exiting eepro_open routine.\n");
 594 
 595         outb(RCV_ENABLE_CMD, ioaddr);
 596 
 597 #ifdef MODULE
 598         MOD_INC_USE_COUNT;
 599 #endif
 600         return 0;
 601 }
 602 
 603 static int
 604 eepro_send_packet(struct sk_buff *skb, struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 605 {
 606         struct eepro_local *lp = (struct eepro_local *)dev->priv;
 607         int ioaddr = dev->base_addr;
 608 
 609         if (net_debug > 5)
 610                 printk("eepro: entering eepro_send_packet routine.\n");
 611         
 612         if (dev->tbusy) {
 613                 /* If we get here, some higher level has decided we are broken.
 614                    There should really be a "kick me" function call instead. */
 615                 int tickssofar = jiffies - dev->trans_start;
 616                 if (tickssofar < 5)
 617                         return 1;
 618                 if (net_debug > 1)
 619                         printk("%s: transmit timed out, %s?\n", dev->name,
 620                                    "network cable problem");
 621                 lp->stats.tx_errors++;
 622                 /* Try to restart the adaptor. */
 623                 outb(SEL_RESET_CMD, ioaddr); 
 624                 /* We are supposed to wait for 2 us after a SEL_RESET */
 625                 SLOW_DOWN_IO;
 626                 SLOW_DOWN_IO;
 627 
 628                 /* Do I also need to flush the transmit buffers here? YES? */
 629                 lp->tx_start = lp->tx_end = RCV_RAM; 
 630                 lp->tx_last = 0;
 631         
 632                 dev->tbusy=0;
 633                 dev->trans_start = jiffies;
 634 
 635                 outb(RCV_ENABLE_CMD, ioaddr);
 636 
 637         }
 638 
 639         /* If some higher layer thinks we've missed an tx-done interrupt
 640            we are passed NULL. Caution: dev_tint() handles the cli()/sti()
 641            itself. */
 642         if (skb == NULL) {
 643                 dev_tint(dev);
 644                 return 0;
 645         }
 646 
 647         /* Block a timer-based transmit from overlapping. */
 648         if (set_bit(0, (void*)&dev->tbusy) != 0)
 649                 printk("%s: Transmitter access conflict.\n", dev->name);
 650         else {
 651                 short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
 652                 unsigned char *buf = skb->data;
 653 
 654                 hardware_send_packet(dev, buf, length);
 655                 dev->trans_start = jiffies;
 656         }
 657 
 658         dev_kfree_skb (skb, FREE_WRITE);
 659 
 660         /* You might need to clean up and record Tx statistics here. */
 661         /* lp->stats.tx_aborted_errors++; */
 662 
 663         if (net_debug > 5)
 664                 printk("eepro: exiting eepro_send_packet routine.\n");
 665         
 666         return 0;
 667 }
 668 
 669 
 670 /*      The typical workload of the driver:
 671         Handle the network interface interrupts. */
 672 static void
 673 eepro_interrupt(int irq, struct pt_regs * regs)
     /* [previous][next][first][last][top][bottom][index][help] */
 674 {
 675         struct device *dev = (struct device *)(irq2dev_map[irq]);
 676         int ioaddr, status, boguscount = 0;
 677 
 678         if (net_debug > 5)
 679                 printk("eepro: entering eepro_interrupt routine.\n");
 680         
 681         if (dev == NULL) {
 682                 printk ("eepro_interrupt(): irq %d for unknown device.\n", irq);
 683                 return;
 684         }
 685         dev->interrupt = 1;
 686         
 687         ioaddr = dev->base_addr;
 688 
 689         do { 
 690                 status = inb(ioaddr + STATUS_REG);
 691 
 692                 if (status & RX_INT) {
 693                         if (net_debug > 4)
 694                                 printk("eepro: packet received interrupt.\n");
 695 
 696                         /* Acknowledge the RX_INT */
 697                         outb(RX_INT, ioaddr + STATUS_REG); 
 698 
 699                         /* Get the received packets */
 700                         eepro_rx(dev);
 701                 }
 702                 else if (status & TX_INT) {
 703                         if (net_debug > 4)
 704                                 printk("eepro: packet transmit interrupt.\n");
 705 
 706                         /* Acknowledge the TX_INT */
 707                         outb(TX_INT, ioaddr + STATUS_REG); 
 708 
 709                         /* Process the status of transmitted packets */
 710                         eepro_transmit_interrupt(dev);
 711                         dev->tbusy = 0;
 712                         mark_bh(NET_BH);
 713                 }               
 714         } while ((++boguscount < 10) && (status & 0x06));
 715 
 716         dev->interrupt = 0;
 717         if (net_debug > 5)
 718                 printk("eepro: exiting eepro_interrupt routine.\n");
 719         
 720         return;
 721 }
 722 
 723 static int
 724 eepro_close(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 725 {
 726         struct eepro_local *lp = (struct eepro_local *)dev->priv;
 727         int ioaddr = dev->base_addr;
 728         short temp_reg;
 729 
 730         dev->tbusy = 1;
 731         dev->start = 0;
 732 
 733         outb(BANK1_SELECT, ioaddr); /* Switch back to Bank 1 */
 734 
 735         /* Disable the physical interrupt line. */
 736         temp_reg = inb(ioaddr + REG1);
 737         outb(temp_reg & 0x7f, ioaddr + REG1); 
 738 
 739         outb(BANK0_SELECT, ioaddr); /* Switch back to Bank 0 */
 740 
 741         /* Flush the Tx and disable Rx. */
 742         outb(STOP_RCV_CMD, ioaddr); 
 743         lp->tx_start = lp->tx_end = RCV_RAM ;
 744         lp->tx_last = 0;  
 745 
 746         /* Mask all the interrupts. */
 747         outb(ALL_MASK, ioaddr + INT_MASK_REG); 
 748 
 749         /* clear all interrupts */
 750         outb(ALL_MASK, ioaddr + STATUS_REG); 
 751 
 752         /* Reset the 82595 */
 753         outb(RESET_CMD, ioaddr); 
 754 
 755         /* release the interrupt */
 756         free_irq(dev->irq);
 757 
 758         irq2dev_map[dev->irq] = 0;
 759 
 760         /* release the ioport-region */
 761         release_region(ioaddr, 16);
 762 
 763         /* Update the statistics here. What statistics? */
 764 
 765         /* We are supposed to wait for 200 us after a RESET */
 766         SLOW_DOWN_IO;
 767         SLOW_DOWN_IO; /* May not be enough? */
 768 
 769 #ifdef MODULE
 770         MOD_DEC_USE_COUNT;
 771 #endif
 772         return 0;
 773 }
 774 
 775 /* Get the current statistics.  This may be called with the card open or
 776    closed. */
 777 static struct enet_statistics *
 778 eepro_get_stats(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 779 {
 780         struct eepro_local *lp = (struct eepro_local *)dev->priv;
 781 
 782         return &lp->stats;
 783 }
 784 
 785 /* Set or clear the multicast filter for this adaptor.
 786    num_addrs == -1      Promiscuous mode, receive all packets
 787    num_addrs == 0       Normal mode, clear multicast list
 788    num_addrs > 0        Multicast mode, receive normal and MC packets, and do
 789                         best-effort filtering.
 790  */
 791 static void
 792 set_multicast_list(struct device *dev, int num_addrs, void *addrs)
     /* [previous][next][first][last][top][bottom][index][help] */
 793 {
 794         struct eepro_local *lp = (struct eepro_local *)dev->priv;
 795         short ioaddr = dev->base_addr;
 796         unsigned short mode;
 797 
 798         if (num_addrs < -1 || num_addrs > 63) {
 799                 outb(BANK2_SELECT, ioaddr); /* be CAREFULL, BANK 2 now */
 800                 mode = inb(ioaddr + REG2);
 801                 outb(mode | PRMSC_Mode, ioaddr + REG2); 
 802                 mode = inb(ioaddr + REG3);
 803                 outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */
 804                 outb(BANK0_SELECT, ioaddr); /* Return to BANK 0 now */
 805                 printk("%s: promiscuous mode enabled.\n", dev->name);
 806         } 
 807         else if (num_addrs == 0) {
 808                 outb(BANK2_SELECT, ioaddr); /* be CAREFULL, BANK 2 now */
 809                 mode = inb(ioaddr + REG2);
 810                 outb(mode & 0xd6, ioaddr + REG2); /* Turn off Multi-IA and PRMSC_Mode bits */
 811                 mode = inb(ioaddr + REG3);
 812                 outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */
 813                 outb(BANK0_SELECT, ioaddr); /* Return to BANK 0 now */
 814         }
 815         else {
 816                 unsigned short status, *eaddrs = addrs;
 817                 int i, boguscount = 0;
 818                 
 819                 /* Disable RX and TX interrupts.  Neccessary to avoid
 820                    corruption of the HOST_ADDRESS_REG by interrupt
 821                    service routines. */
 822                 outb(ALL_MASK, ioaddr + INT_MASK_REG);
 823 
 824                 outb(BANK2_SELECT, ioaddr); /* be CAREFULL, BANK 2 now */
 825                 mode = inb(ioaddr + REG2);
 826                 outb(mode | Multi_IA, ioaddr + REG2);   
 827                 mode = inb(ioaddr + REG3);
 828                 outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */
 829                 outb(BANK0_SELECT, ioaddr); /* Return to BANK 0 now */
 830                 outw(lp->tx_end, ioaddr + HOST_ADDRESS_REG);
 831                 outw(MC_SETUP, ioaddr + IO_PORT);
 832                 outw(0, ioaddr + IO_PORT);
 833                 outw(0, ioaddr + IO_PORT);
 834                 outw(6*(num_addrs + 1), ioaddr + IO_PORT);
 835                 for (i = 0; i < num_addrs; i++) {
 836                         outw(*eaddrs++, ioaddr + IO_PORT);
 837                         outw(*eaddrs++, ioaddr + IO_PORT);
 838                         outw(*eaddrs++, ioaddr + IO_PORT);
 839                 }
 840                 eaddrs = (unsigned short *) dev->dev_addr;
 841                 outw(eaddrs[0], ioaddr + IO_PORT);
 842                 outw(eaddrs[1], ioaddr + IO_PORT);
 843                 outw(eaddrs[2], ioaddr + IO_PORT);
 844                 outw(lp->tx_end, ioaddr + XMT_BAR);
 845                 outb(MC_SETUP, ioaddr);
 846 
 847                 /* Update the transmit queue */
 848                 i = lp->tx_end + XMT_HEADER + 6*(num_addrs + 1);
 849                 if (lp->tx_start != lp->tx_end) { 
 850                         /* update the next address and the chain bit in the 
 851                            last packet */
 852                         outw(lp->tx_last + XMT_CHAIN, ioaddr + HOST_ADDRESS_REG);
 853                         outw(i, ioaddr + IO_PORT);
 854                         outw(lp->tx_last + XMT_COUNT, ioaddr + HOST_ADDRESS_REG);
 855                         status = inw(ioaddr + IO_PORT);
 856                         outw(status | CHAIN_BIT, ioaddr + IO_PORT);
 857                         lp->tx_end = i ;
 858                 } else lp->tx_start = lp->tx_end = i ;
 859 
 860                 /* Acknowledge that the MC setup is done */
 861                 do { /* We should be doing this in the eepro_interrupt()! */
 862                         SLOW_DOWN_IO;
 863                         SLOW_DOWN_IO;
 864                         if (inb(ioaddr + STATUS_REG) & 0x08) {
 865                                 i = inb(ioaddr);
 866                                 outb(0x08, ioaddr + STATUS_REG);
 867                                 if (i & 0x20) { /* command ABORTed */
 868                                         printk("%s: multicast setup failed.\n", 
 869                                                 dev->name);
 870                                         break;
 871                                 } else if ((i & 0x0f) == 0x03)  { /* MC-Done */
 872                                         printk("%s: set Rx mode to %d addresses.\n", 
 873                                                 dev->name, num_addrs);
 874                                         break;
 875                                 }
 876                         }
 877                 } while (++boguscount < 100);
 878 
 879                 /* Re-enable RX and TX interrupts */
 880                 outb(ALL_MASK & ~(RX_MASK | TX_MASK), ioaddr + INT_MASK_REG); 
 881         
 882         }
 883         outb(RCV_ENABLE_CMD, ioaddr);
 884 }
 885 
 886 /* The horrible routine to read a word from the serial EEPROM. */
 887 /* IMPORTANT - the 82595 will be set to Bank 0 after the eeprom is read */
 888 
 889 /* The delay between EEPROM clock transitions. */
 890 #define eeprom_delay()  { int _i = 40; while (--_i > 0) { __SLOW_DOWN_IO; }}
 891 #define EE_READ_CMD (6 << 6)
 892 
 893 int
 894 read_eeprom(int ioaddr, int location)
     /* [previous][next][first][last][top][bottom][index][help] */
 895 {
 896         int i;
 897         unsigned short retval = 0;
 898         short ee_addr = ioaddr + EEPROM_REG;
 899         int read_cmd = location | EE_READ_CMD;
 900         short ctrl_val = EECS ;
 901         
 902         outb(BANK2_SELECT, ioaddr);
 903         outb(ctrl_val, ee_addr);
 904         
 905         /* Shift the read command bits out. */
 906         for (i = 8; i >= 0; i--) {
 907                 short outval = (read_cmd & (1 << i)) ? ctrl_val | EEDI
 908                         : ctrl_val;
 909                 outb(outval, ee_addr);
 910                 outb(outval | EESK, ee_addr);   /* EEPROM clock tick. */
 911                 eeprom_delay();
 912                 outb(outval, ee_addr);  /* Finish EEPROM a clock tick. */
 913                 eeprom_delay();
 914         }
 915         outb(ctrl_val, ee_addr);
 916         
 917         for (i = 16; i > 0; i--) {
 918                 outb(ctrl_val | EESK, ee_addr);  eeprom_delay();
 919                 retval = (retval << 1) | ((inb(ee_addr) & EEDO) ? 1 : 0);
 920                 outb(ctrl_val, ee_addr);  eeprom_delay();
 921         }
 922 
 923         /* Terminate the EEPROM access. */
 924         ctrl_val &= ~EECS;
 925         outb(ctrl_val | EESK, ee_addr);
 926         eeprom_delay();
 927         outb(ctrl_val, ee_addr);
 928         eeprom_delay();
 929         outb(BANK0_SELECT, ioaddr);
 930         return retval;
 931 }
 932 
 933 static void
 934 hardware_send_packet(struct device *dev, void *buf, short length)
     /* [previous][next][first][last][top][bottom][index][help] */
 935 {
 936         struct eepro_local *lp = (struct eepro_local *)dev->priv;
 937         short ioaddr = dev->base_addr;
 938         unsigned status, tx_available, last, end, boguscount = 10;
 939 
 940         if (net_debug > 5)
 941                 printk("eepro: entering hardware_send_packet routine.\n");
 942 
 943         while (boguscount-- > 0) {
 944 
 945                 /* determine how much of the transmit buffer space is available */
 946                 if (lp->tx_end > lp->tx_start)
 947                         tx_available = XMT_RAM - (lp->tx_end - lp->tx_start);
 948                 else if (lp->tx_end < lp->tx_start)
 949                         tx_available = lp->tx_start - lp->tx_end;
 950                 else tx_available = XMT_RAM;
 951 
 952                 /* Disable RX and TX interrupts.  Neccessary to avoid
 953                    corruption of the HOST_ADDRESS_REG by interrupt
 954                    service routines. */
 955                 outb(ALL_MASK, ioaddr + INT_MASK_REG);
 956 
 957                 if (((((length + 1) >> 1) << 1) + 2*XMT_HEADER) 
 958                         >= tx_available)   /* No space available ??? */
 959                         continue;
 960 
 961                 last = lp->tx_end;
 962                 end = last + (((length + 1) >> 1) << 1) + XMT_HEADER;
 963 
 964                 if (end >= RAM_SIZE) { /* the transmit buffer is wrapped around */
 965                         if ((RAM_SIZE - last) <= XMT_HEADER) {  
 966                         /* Arrrr!!!, must keep the xmt header together,
 967                           several days were lost to chase this one down. */
 968                                 last = RCV_RAM;
 969                                 end = last + (((length + 1) >> 1) << 1) + XMT_HEADER;
 970                         }       
 971                         else end = RCV_RAM + (end - RAM_SIZE);
 972                 }
 973 
 974                 outw(last, ioaddr + HOST_ADDRESS_REG);
 975                 outw(XMT_CMD, ioaddr + IO_PORT);
 976                 outw(0, ioaddr + IO_PORT);
 977                 outw(end, ioaddr + IO_PORT);
 978                 outw(length, ioaddr + IO_PORT);
 979                 outsw(ioaddr + IO_PORT, buf, (length + 1) >> 1);
 980 
 981                 if (lp->tx_start != lp->tx_end) { 
 982                         /* update the next address and the chain bit in the 
 983                            last packet */
 984                         if (lp->tx_end != last) {
 985                                 outw(lp->tx_last + XMT_CHAIN, ioaddr + HOST_ADDRESS_REG);
 986                                 outw(last, ioaddr + IO_PORT);
 987                         }
 988                         outw(lp->tx_last + XMT_COUNT, ioaddr + HOST_ADDRESS_REG);
 989                         status = inw(ioaddr + IO_PORT);
 990                         outw(status | CHAIN_BIT, ioaddr + IO_PORT);
 991                 }
 992 
 993                 /* A dummy read to flush the DRAM write pipeline */
 994                 status = inw(ioaddr + IO_PORT); 
 995 
 996                 /* Enable RX and TX interrupts */
 997                 outb(ALL_MASK & ~(RX_MASK | TX_MASK), ioaddr + INT_MASK_REG); 
 998         
 999                 if (lp->tx_start == lp->tx_end) {
1000                         outw(last, ioaddr + XMT_BAR);
1001                         outb(XMT_CMD, ioaddr);
1002                         lp->tx_start = last;   /* I don't like to change tx_start here */
1003                 }
1004                 else    outb(RESUME_XMT_CMD, ioaddr);
1005 
1006                 lp->tx_last = last;
1007                 lp->tx_end = end;
1008 
1009                 if (dev->tbusy) {
1010                         dev->tbusy = 0;
1011                         mark_bh(NET_BH);
1012                 }
1013 
1014                 if (net_debug > 5)
1015                         printk("eepro: exiting hardware_send_packet routine.\n");
1016                 return;
1017         }
1018         dev->tbusy = 1;
1019         if (net_debug > 5)
1020                 printk("eepro: exiting hardware_send_packet routine.\n");
1021 }
1022 
1023 static void
1024 eepro_rx(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
1025 {
1026         struct eepro_local *lp = (struct eepro_local *)dev->priv;
1027         short ioaddr = dev->base_addr;
1028         short boguscount = 20;
1029         short rcv_car = lp->rx_start;
1030         unsigned rcv_event, rcv_status, rcv_next_frame, rcv_size;
1031 
1032         if (net_debug > 5)
1033                 printk("eepro: entering eepro_rx routine.\n");
1034         
1035         /* Set the read pointer to the start of the RCV */
1036         outw(rcv_car, ioaddr + HOST_ADDRESS_REG);
1037         rcv_event = inw(ioaddr + IO_PORT);
1038 
1039         while (rcv_event == RCV_DONE) {
1040                 rcv_status = inw(ioaddr + IO_PORT);
1041                 rcv_next_frame = inw(ioaddr + IO_PORT);
1042                 rcv_size = inw(ioaddr + IO_PORT);
1043 
1044                 if ((rcv_status & (RX_OK | RX_ERROR)) == RX_OK) {
1045                         /* Malloc up new buffer. */
1046                         struct sk_buff *skb;
1047 
1048                         rcv_size &= 0x3fff;
1049                         skb = dev_alloc_skb(rcv_size+2);
1050                         if (skb == NULL) {
1051                                 printk("%s: Memory squeeze, dropping packet.\n", dev->name);
1052                                 lp->stats.rx_dropped++;
1053                                 break;
1054                         }
1055                         skb->dev = dev;
1056                         skb_reserve(skb,2);
1057 
1058                         insw(ioaddr+IO_PORT, skb_put(skb,rcv_size), (rcv_size + 1) >> 1);
1059         
1060                         skb->protocol = eth_type_trans(skb,dev);        
1061                         netif_rx(skb);
1062                         lp->stats.rx_packets++;
1063                 }
1064                 else { /* Not sure will ever reach here, 
1065                           I set the 595 to discard bad received frames */
1066                         lp->stats.rx_errors++;
1067                         if (rcv_status & 0x0100)
1068                                 lp->stats.rx_over_errors++;
1069                         else if (rcv_status & 0x0400)
1070                                 lp->stats.rx_frame_errors++;
1071                         else if (rcv_status & 0x0800)
1072                                 lp->stats.rx_crc_errors++;
1073                         printk("%s: event = %#x, status = %#x, next = %#x, size = %#x\n", 
1074                                 dev->name, rcv_event, rcv_status, rcv_next_frame, rcv_size);
1075                 }
1076                 if (rcv_status & 0x1000)
1077                         lp->stats.rx_length_errors++;
1078                 if (--boguscount == 0)
1079                         break;
1080 
1081                 rcv_car = lp->rx_start + RCV_HEADER + rcv_size;
1082                 lp->rx_start = rcv_next_frame;
1083                 outw(rcv_next_frame, ioaddr + HOST_ADDRESS_REG);
1084                 rcv_event = inw(ioaddr + IO_PORT);
1085 
1086         } 
1087         if (rcv_car == 0)
1088                 rcv_car = (RCV_UPPER_LIMIT << 8) | 0xff;
1089         outw(rcv_car - 1, ioaddr + RCV_STOP);
1090 
1091         if (net_debug > 5)
1092                 printk("eepro: exiting eepro_rx routine.\n");
1093 }
1094 
1095 static void
1096 eepro_transmit_interrupt(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
1097 {
1098         struct eepro_local *lp = (struct eepro_local *)dev->priv;
1099         short ioaddr = dev->base_addr;
1100         short boguscount = 10; 
1101         short xmt_status;
1102 
1103         while (lp->tx_start != lp->tx_end) { 
1104 
1105                 outw(lp->tx_start, ioaddr + HOST_ADDRESS_REG);
1106                 xmt_status = inw(ioaddr+IO_PORT);
1107                 if ((xmt_status & TX_DONE_BIT) == 0) break;
1108                 xmt_status = inw(ioaddr+IO_PORT);
1109                 lp->tx_start = inw(ioaddr+IO_PORT);
1110         
1111                 if (dev->tbusy) {
1112                         dev->tbusy = 0;
1113                         mark_bh(NET_BH);
1114                 }
1115 
1116                 if (xmt_status & 0x2000)
1117                         lp->stats.tx_packets++;
1118                 else {
1119                         lp->stats.tx_errors++;
1120                         if (xmt_status & 0x0400)
1121                                 lp->stats.tx_carrier_errors++;
1122                         printk("%s: XMT status = %#x\n",
1123                                 dev->name, xmt_status);
1124                 }
1125                 if (xmt_status & 0x000f)
1126                         lp->stats.collisions += (xmt_status & 0x000f);
1127                 if ((xmt_status & 0x0040) == 0x0)
1128                         lp->stats.tx_heartbeat_errors++;
1129 
1130                 if (--boguscount == 0)
1131                         break;  
1132         }
1133 }
1134 
1135 #ifdef MODULE
1136 char kernel_version[] = UTS_RELEASE;
1137 static struct device dev_eepro = {
1138         "        " /*"eepro"*/, 0, 0, 0, 0, 0, 0, 0, 0, 0, NULL, eepro_probe };
1139 
1140 int
1141 init_module(void)
     /* [previous][next][first][last][top][bottom][index][help] */
1142 {
1143         if (register_netdev(&dev_eepro) != 0)
1144                 return -EIO;
1145         return 0;
1146 }
1147 
1148 void
1149 cleanup_module(void)
     /* [previous][next][first][last][top][bottom][index][help] */
1150 {
1151         if (MOD_IN_USE)
1152                 printk("eepro: device busy, remove delayed\n");
1153         else
1154         {
1155                 unregister_netdev(&dev_eepro);
1156                 kfree_s(dev_eepro.priv,sizeof(struct eepro_local));
1157                 dev_eepro.priv=NULL;
1158         }
1159 }
1160 #endif /* MODULE */

/* [previous][next][first][last][top][bottom][index][help] */