drivers/sbus/dvma.c

/* */
This source file includes following definitions.
dump_dma_regs
dvma_init
   1 /* dvma.c:  Routines that are used to access DMA on the Sparc SBus.
   2  *
   3  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
   4  */
   5 
   6 #include <linux/kernel.h>
   7 #include <linux/malloc.h>
   8 
   9 #include <asm/oplib.h>
  10 #include <asm/contregs.h>
  11 #include <asm/sysen.h>
  12 #include <asm/delay.h>
  13 #include <asm/idprom.h>
  14 #include <asm/machines.h>
  15 #include <asm/io.h>
  16 #include <asm/dma.h>
  17 #include <asm/sbus.h>
  18 #include <asm/vac-ops.h>
  19 #include <asm/vaddrs.h>
  20 
  21 struct Linux_SBus_DMA *dma_chain;
  22 
  23 /* Print out the current values in the DMA control registers */
  24 void
  25 dump_dma_regs(struct sparc_dma_registers *dregs)
     /*  */
  26 {
  27         printk("DMA CONTROL<%08lx>  ADDR<%08lx> CNT<%08lx> TEST<%08lx>\n",
  28                dregs->cond_reg,
  29                (unsigned long) dregs->st_addr,
  30                (unsigned long) dregs->cnt,
  31                (unsigned long) dregs->dma_test);
  32         return;
  33 }
  34 
  35 
  36 /* Probe this SBus DMA module(s) */
  37 unsigned long
  38 dvma_init(struct linux_sbus *sbus, unsigned long memory_start)
     /*  */
  39 {
  40         struct linux_sbus_device *this_dev;
  41         struct Linux_SBus_DMA *dma;
  42         struct Linux_SBus_DMA *dchain;
  43         static int num_dma=0;
  44 
  45         for_each_sbusdev(this_dev, sbus) {
  46                 if(strcmp(this_dev->prom_name, "dma") &&
  47                    strcmp(this_dev->prom_name, "ledma") &&
  48                    strcmp(this_dev->prom_name, "espdma"))
  49                         continue;
  50 
  51                 /* Found one... */
  52                 dma = (struct Linux_SBus_DMA *) memory_start;
  53                 memory_start += sizeof(struct Linux_SBus_DMA);
  54 
  55                 dma->SBus_dev = this_dev;
  56 
  57                 /* Put at end of dma chain */
  58                 dchain = dma_chain;
  59                 if(dchain) {
  60                         while(dchain->next) dchain=dchain->next;
  61                         dchain->next=dma;
  62                 } else {
  63                         /* We're the first in line */
  64                         dma_chain=dma;
  65                 }
  66                 dma->next = 0;
  67 
  68                 printk("dma%d: ", num_dma);
  69                 num_dma++;
  70 
  71                 /* The constant PAGE_SIZE that is passed to sparc_alloc_io makes the
  72                  * routine only alloc 1 page, that was what the original code did
  73                  */
  74                 prom_apply_sbus_ranges(dma->SBus_dev->reg_addrs, 0x1);
  75                 dma->regs = (struct sparc_dma_registers *)
  76                         sparc_alloc_io (dma->SBus_dev->reg_addrs[0].phys_addr, 0,
  77                                         PAGE_SIZE, "dma",
  78                                         dma->SBus_dev->reg_addrs[0].which_io, 0x0);
  79 
  80                 dma->node = dma->SBus_dev->prom_node;
  81                 dma->running=0;      /* No tranfers going on as of yet */
  82                 dma->allocated=0;    /* No one has allocated us yet */
  83                 switch((dma->regs->cond_reg)&DMA_DEVICE_ID) {
  84                 case DMA_VERS0:
  85                         dma->revision=dvmarev0;
  86                         printk("Revision 0 ");
  87                         break;
  88                 case DMA_ESCV1:
  89                         dma->revision=dvmaesc1;
  90                         printk("ESC Revision 1 ");
  91                         break;
  92                 case DMA_VERS1:
  93                         dma->revision=dvmarev1;
  94                         printk("Revision 1 ");
  95                         break;
  96                 case DMA_VERS2:
  97                         dma->revision=dvmarev2;
  98                         printk("Revision 2 ");
  99                         break;
 100                 case DMA_VERSPLUS:
 101                         dma->revision=dvmarevplus;
 102                         printk("Revision 1 PLUS ");
 103                         break;
 104                 default:
 105                         printk("unknown dma version");
 106                         dma->allocated = 1;
 107                         break;
 108                 }
 109                 printk("\n");
 110 #if 0 /* Clutters up the screen */
 111                 dump_dma_regs(dma->regs);
 112 #endif
 113         };  /* while(this_dev) */
 114 
 115         return memory_start;
 116 }
 117
/* */
root/drivers/sbus/dvma.c

DEFINITIONS
