1 #ifndef _LINUX_FD_H 2 #define _LINUX_FD_H 3 4 #include <linux/ioctl.h> 5 6 /* New file layout: Now the ioctl definitions immediately follow the 7 * definitions of the structures that they use */ 8 9 /* 10 * Geometry 11 */ 12 struct floppy_struct { 13 unsigned int size, /* nr of sectors total */ 14 sect, /* sectors per track */ 15 head, /* nr of heads */ 16 track, /* nr of tracks */ 17 stretch; /* !=0 means double track steps */ 18 #define FD_STRETCH 1 19 #define FD_SWAPSIDES 2 20 21 unsigned char gap, /* gap1 size */ 22 23 rate, /* data rate. |= 0x40 for perpendicular */ 24 #define FD_2M 0x4 25 #define FD_SIZECODEMASK 0x38 26 #define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8) 27 #define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \ 28 512 : 128 << FD_SIZECODE(floppy) ) 29 #define FD_PERP 0x40 30 31 spec1, /* stepping rate, head unload time */ 32 fmt_gap; /* gap2 size */ 33 const char * name; /* used only for predefined formats */ 34 }; 35 36 37 /* commands needing write access have 0x40 set */ 38 /* commands needing super user access have 0x80 set */ 39 40 #define FDCLRPRM _IO(2, 0x41) 41 /* clear user-defined parameters */ 42 43 #define FDSETPRM _IOW(2, 0x42, struct floppy_struct) 44 #define FDSETMEDIAPRM FDSETPRM 45 /* set user-defined parameters for current media */ 46 47 #define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) 48 #define FDGETPRM _IOR(2, 0x04, struct floppy_struct) 49 #define FDDEFMEDIAPRM FDDEFPRM 50 #define FDGETMEDIAPRM FDGETPRM 51 /* set/get disk parameters */ 52 53 54 #define FDMSGON _IO(2,0x45) 55 #define FDMSGOFF _IO(2,0x46) 56 /* issue/don't issue kernel messages on media type change */ 57 58 59 /* 60 * Formatting (obsolete) 61 */ 62 #define FD_FILL_BYTE 0xF6 /* format fill byte. */ 63 64 struct format_descr { 65 unsigned int device,head,track; 66 }; 67 68 #define FDFMTBEG _IO(2,0x47) 69 /* begin formatting a disk */ 70 #define FDFMTTRK _IOW(2,0x48, struct format_descr) 71 /* format the specified track */ 72 #define FDFMTEND _IO(2,0x49) 73 /* end formatting a disk */ 74 75 76 /* 77 * Error thresholds 78 */ 79 struct floppy_max_errors { 80 unsigned int 81 abort, /* number of errors to be reached before aborting */ 82 read_track, /* maximal number of errors permitted to read an 83 * entire track at once */ 84 reset, /* maximal number of errors before a reset is tried */ 85 recal, /* maximal number of errors before a recalibrate is 86 * tried */ 87 88 /* 89 * Threshold for reporting FDC errors to the console. 90 * Setting this to zero may flood your screen when using 91 * ultra cheap floppies ;-) 92 */ 93 reporting; 94 95 }; 96 97 #define FDSETEMSGTRESH _IO(2,0x4a) 98 /* set fdc error reporting threshold */ 99 100 #define FDFLUSH _IO(2,0x4b) 101 /* flush buffers for media; either for verifying media, or for 102 * handling a media change without closing the file descriptor */ 103 104 #define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors) 105 #define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors) 106 /* set/get abortion and read_track threshold. See also floppy_drive_params 107 * structure */ 108 109 110 typedef char floppy_drive_name[16]; 111 #define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name) 112 /* get drive type: 5 1/4 or 3 1/2 */ 113 114 115 /* 116 * Drive parameters (user modifiable) 117 */ 118 struct floppy_drive_params { 119 char cmos; /* cmos type */ 120 121 /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms 122 * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA). 123 */ 124 unsigned long max_dtr; /* Step rate, usec */ 125 unsigned long hlt; /* Head load/settle time, msec */ 126 unsigned long hut; /* Head unload time (remnant of 127 * 8" drives) */ 128 unsigned long srt; /* Step rate, usec */ 129 130 unsigned long spinup; /* time needed for spinup (expressed 131 * in jiffies) */ 132 unsigned long spindown; /* timeout needed for spindown */ 133 unsigned char spindown_offset; /* decides in which position the disk 134 * will stop */ 135 unsigned char select_delay; /* delay to wait after select */ 136 unsigned char rps; /* rotations per second */ 137 unsigned char tracks; /* maximum number of tracks */ 138 unsigned long timeout; /* timeout for interrupt requests */ 139 140 unsigned char interleave_sect; /* if there are more sectors, use 141 * interleave */ 142 143 struct floppy_max_errors max_errors; 144 145 char flags; /* various flags, including ftd_msg */ 146 /* 147 * Announce successful media type detection and media information loss after 148 * disk changes. 149 * Also used to enable/disable printing of overrun warnings. 150 */ 151 152 #define FTD_MSG 0x10 153 #define FD_BROKEN_DCL 0x20 154 #define FD_DEBUG 0x02 155 #define FD_SILENT_DCL_CLEAR 0x4 156 #define FD_INVERTED_DCL 0x80 157 158 char read_track; /* use readtrack during probing? */ 159 160 /* 161 * Auto-detection. Each drive type has eight formats which are 162 * used in succession to try to read the disk. If the FDC cannot lock onto 163 * the disk, the next format is tried. This uses the variable 'probing'. 164 */ 165 short autodetect[8]; /* autodetected formats */ 166 167 int checkfreq; /* how often should the drive be checked for disk 168 * changes */ 169 int native_format; /* native format of this drive */ 170 }; 171 172 enum { 173 FD_NEED_TWADDLE_BIT, /* more magic */ 174 FD_VERIFY_BIT, /* inquire for write protection */ 175 FD_DISK_NEWCHANGE_BIT, /* change detected, and no action undertaken yet 176 * to clear media change status */ 177 FD_UNUSED_BIT, 178 FD_DISK_CHANGED_BIT, /* disk has been changed since last i/o */ 179 FD_DISK_WRITABLE_BIT /* disk is writable */ 180 }; 181 182 #define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params) 183 #define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params) 184 /* set/get drive parameters */ 185 186 187 /* 188 * Current drive state (not directly modifiable by user, readonly) 189 */ 190 struct floppy_drive_struct { 191 signed char flags; 192 /* values for these flags */ 193 #define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT) 194 #define FD_VERIFY (1 << FD_VERIFY_BIT) 195 #define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT) 196 #define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT) 197 #define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT) 198 199 unsigned long spinup_date; 200 unsigned long select_date; 201 unsigned long first_read_date; 202 short probed_format; 203 short track; /* current track */ 204 short maxblock; /* id of highest block read */ 205 short maxtrack; /* id of highest half track read */ 206 int generation; /* how many diskchanges? */ 207 208 /* 209 * (User-provided) media information is _not_ discarded after a media change 210 * if the corresponding keep_data flag is non-zero. Positive values are 211 * decremented after each probe. 212 */ 213 int keep_data; 214 215 /* Prevent "aliased" accesses. */ 216 int fd_ref; 217 int fd_device; 218 int last_checked; /* when was the drive last checked for a disk 219 * change? */ 220 221 char *dmabuf; 222 int bufblocks; 223 }; 224 225 #define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct) 226 #define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct) 227 /* get drive state: GET returns the cached state, POLL polls for new state */ 228 229 230 /* 231 * reset FDC 232 */ 233 enum reset_mode { 234 FD_RESET_IF_NEEDED, /* reset only if the reset flags is set */ 235 FD_RESET_IF_RAWCMD, /* obsolete */ 236 FD_RESET_ALWAYS /* reset always */ 237 }; 238 #define FDRESET _IO(2, 0x54) 239 240 241 /* 242 * FDC state 243 */ 244 struct floppy_fdc_state { 245 int spec1; /* spec1 value last used */ 246 int spec2; /* spec2 value last used */ 247 int dtr; 248 unsigned char version; /* FDC version code */ 249 unsigned char dor; 250 int address; /* io address */ 251 unsigned int rawcmd:2; 252 unsigned int reset:1; 253 unsigned int need_configure:1; 254 unsigned int perp_mode:2; 255 unsigned int has_fifo:1; 256 unsigned int driver_version; /* version code for floppy driver */ 257 #define FD_DRIVER_VERSION 0x100 258 /* user programs using the floppy API should use floppy_fdc_state to 259 * get the version number of the floppy driver that they are running 260 * on. If this version number is bigger than the one compiled into the 261 * user program (the FD_DRIVER_VERSION define), it should be prepared 262 * to bigger structures 263 */ 264 265 unsigned char track[4]; 266 /* Position of the heads of the 4 units attached to this FDC, 267 * as stored on the FDC. In the future, the position as stored 268 * on the FDC might not agree with the actual physical 269 * position of these drive heads. By allowing such 270 * disagreement, it will be possible to reset the FDC without 271 * incurring the expensive cost of repositioning all heads. 272 * Right now, these positions are hard wired to 0. */ 273 274 }; 275 276 #define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state) 277 278 279 /* 280 * Asynchronous Write error tracking 281 */ 282 struct floppy_write_errors { 283 /* Write error logging. 284 * 285 * These fields can be cleared with the FDWERRORCLR ioctl. 286 * Only writes that were attempted but failed due to a physical media 287 * error are logged. write(2) calls that fail and return an error code 288 * to the user process are not counted. 289 */ 290 291 unsigned int write_errors; /* number of physical write errors 292 * encountered */ 293 294 /* position of first and last write errors */ 295 unsigned long first_error_sector; 296 int first_error_generation; 297 unsigned long last_error_sector; 298 int last_error_generation; 299 300 unsigned int badness; /* highest retry count for a read or write 301 * operation */ 302 }; 303 304 #define FDWERRORCLR _IO(2, 0x56) 305 /* clear write error and badness information */ 306 #define FDWERRORGET _IOR(2, 0x17, struct floppy_write_errors) 307 /* get write error and badness information */ 308 309 310 /* 311 * Raw commands 312 */ 313 /* new interface flag: now we can do them in batches */ 314 #define FDHAVEBATCHEDRAWCMD 315 316 struct floppy_raw_cmd { 317 unsigned int flags; 318 #define FD_RAW_READ 1 319 #define FD_RAW_WRITE 2 320 #define FD_RAW_NO_MOTOR 4 321 #define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */ 322 #define FD_RAW_INTR 8 /* wait for an interrupt */ 323 #define FD_RAW_SPIN 0x10 /* spin up the disk for this command */ 324 #define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command 325 * completion */ 326 #define FD_RAW_NEED_DISK 0x40 /* this command needs a disk to be present */ 327 #define FD_RAW_NEED_SEEK 0x80 /* this command uses an implied seek (soft) */ 328 329 /* more "in" flags */ 330 #define FD_RAW_MORE 0x100 /* more records follow */ 331 #define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */ 332 #define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */ 333 #define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure 334 * detection too */ 335 336 /* more "out" flags */ 337 #define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */ 338 #define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */ 339 340 void *data; 341 char *kernel_data; /* location of data buffer in the kernel */ 342 struct floppy_raw_cmd *next; /* used for chaining of raw cmd's 343 * within the kernel */ 344 long length; /* in: length of dma transfer. out: remaining bytes */ 345 long phys_length; /* physical length, if different from dma length */ 346 int buffer_length; /* length of allocated buffer */ 347 348 unsigned char rate; 349 unsigned char cmd_count; 350 unsigned char cmd[16]; 351 unsigned char reply_count; 352 unsigned char reply[16]; 353 int track; 354 int resultcode; 355 356 int reserved1; 357 int reserved2; 358 }; 359 360 #define FDRAWCMD _IO(2, 0x58) 361 /* send a raw command to the fdc. Structure size not included, because of 362 * batches */ 363 364 #define FDTWADDLE _IO(2, 0x59) 365 /* flicker motor-on bit before reading a sector. Experimental */ 366 367 368 #define FDEJECT _IO(2, 0x5a) 369 /* eject the disk */ 370 371 #endif