taglinefilesource code
printk120arch/alpha/boot/main.cprintk("Switching to OSF PAL-code .. ");
printk135arch/alpha/boot/main.cprintk("failed, code %ld\n", i);
printk148arch/alpha/boot/main.cprintk("Ok (rev %lx)\n", rev);
printk183arch/alpha/boot/main.cprintk("Boot file specification (%s) not implemented\n", bootfile);
printk208arch/alpha/boot/main.cprintk("Linux/AXP bootloader for Linux " UTS_RELEASE "\n");
printk210arch/alpha/boot/main.cprintk("Expected 8kB pages, got %ldkB\n", hwrpb.pagesize >> 10);
printk216arch/alpha/boot/main.cprintk("Unable to open boot device: %016lx\n", dev);
printk220arch/alpha/boot/main.cprintk("Loading vmlinux ...");
printk224arch/alpha/boot/main.cprintk("Failed (%lx)\n", i);
printk235arch/alpha/boot/main.cprintk(" Ok\nNow booting the kernel\n");
printk31arch/alpha/kernel/apecs.c# define DBG(args)  printk args
printk186arch/alpha/kernel/apecs.cprintk("apecs.c:conf_read: got stat0=%x\n", stat0);
printk259arch/alpha/kernel/apecs.cprintk("apecs.c:conf_write: got stat0=%x\n", stat0);
printk470arch/alpha/kernel/apecs.cprintk(" +%lx %lx %lx\n", i*sizeof(long), ptr[i], ptr[i+1]);
printk146arch/alpha/kernel/bios32.cprintk("bios32 WARNING: "
printk164arch/alpha/kernel/bios32.cprintk("bios32 WARNING: slot %d, function %d "
printk188arch/alpha/kernel/bios32.cprintk("bios32 WARNING: slot %d, function %d "
printk363arch/alpha/kernel/bios32.cprintk("Alpha PCI BIOS32 revision %x.%02x\n", MAJOR_REV, MINOR_REV);
printk366arch/alpha/kernel/bios32.cprintk("...NOT modifying existing (SRM) PCI configuration\n");
printk614arch/alpha/kernel/bios32.cprintk("bios32.avanti_and_noname_fixup: no dev on bus %d, slot %d!!\n",
printk257arch/alpha/kernel/irq.cprintk("Trying to free IRQ%d\n", irq);
printk261arch/alpha/kernel/irq.cprintk("Trying to free free IRQ%d\n", irq);
printk276arch/alpha/kernel/irq.cprintk("Whee.. NMI received. Probable hardware error\n");
printk277arch/alpha/kernel/irq.cprintk("61=%02x, 461=%02x\n", inb(0x61), inb(0x461));
printk284arch/alpha/kernel/irq.cprintk("IO device interrupt, irq = %d\n", irq);
printk285arch/alpha/kernel/irq.cprintk("PC = %016lx PS=%04lx\n", regs->pc, regs->ps);
printk286arch/alpha/kernel/irq.cprintk("Expecting: ");
printk289arch/alpha/kernel/irq.cprintk("[%s:%d] ", irq_action[i].name, i);
printk290arch/alpha/kernel/irq.cprintk("\n");
printk292arch/alpha/kernel/irq.cprintk("64=%02x, 60=%02x, 3fa=%02x 2fa=%02x\n",
printk318arch/alpha/kernel/irq.cprintk("device_interrupt: unexpected interrupt %d\n", irq);
printk511arch/alpha/kernel/irq.cprintk("Unknown local interrupt %lx\n", vector);
printk599arch/alpha/kernel/irq.cprintk("Machine check\n");
printk609arch/alpha/kernel/irq.cprintk("Interprocessor interrupt? You must be kidding\n");
printk628arch/alpha/kernel/irq.cprintk("Performance counter interrupt\n");
printk631arch/alpha/kernel/irq.cprintk("Hardware intr %ld %lx? Huh?\n", type, vector);
printk633arch/alpha/kernel/irq.cprintk("PC = %016lx PS=%04lx\n", regs.pc, regs.ps);
printk140arch/alpha/kernel/lca.cprintk("lca.c:conf_read: got stat0=%lx\n", stat0);
printk177arch/alpha/kernel/lca.cprintk("lca.c:conf_write: got stat0=%lx\n", stat0);
printk341arch/alpha/kernel/lca.cprintk("    %s %s error to %s occurred at address %x",
printk347arch/alpha/kernel/lca.cprintk("    A b-cache tag parity error was detected.\n");
printk350arch/alpha/kernel/lca.cprintk("    Several other correctable errors occurred.\n");
printk353arch/alpha/kernel/lca.cprintk("    Several other uncorrectable errors occurred.\n");
printk356arch/alpha/kernel/lca.cprintk("    Attempted to access non-existent memory.\n");
printk376arch/alpha/kernel/lca.cprintk("    %s initiated PCI %s cycle to address %x failed due to %s.\n",
printk379arch/alpha/kernel/lca.cprintk("    (Error occurred at PCI memory address %x.)\n", (stat0 & ~IOC_P_NBR));
printk382arch/alpha/kernel/lca.cprintk("    Other PCI errors occurred simultaneously.\n");
printk393arch/alpha/kernel/lca.cprintk("lca: machine check (la=0x%lx,pc=0x%lx)\n", la, regs->pc);
printk428arch/alpha/kernel/lca.cprintk("  Reason: %s (short frame%s, dc_stat=%lx):\n",
printk439arch/alpha/kernel/lca.cprintk("  Reason: %s (long frame%s):\n",
printk441arch/alpha/kernel/lca.cprintk("    reason: %lx  exc_addr: %lx  dc_stat: %lx\n", 
printk443arch/alpha/kernel/lca.cprintk("    car: %lx\n", el.l->car);
printk453arch/alpha/kernel/lca.cprintk("  Unknown errorlog size %d\n", el.c->size);
printk164arch/alpha/kernel/osf_sys.cprintk("%s: unimplemented OSF mmap flags %04lx\n", current->comm, flags);
printk374arch/alpha/kernel/osf_sys.cprintk("osf_mount(%ld, %x)\n", typenr, flag);
printk60arch/alpha/kernel/process.cprintk("\nps: %04lx pc: [<%016lx>]\n", regs->ps, regs->pc);
printk61arch/alpha/kernel/process.cprintk("rp: [<%016lx>] sp: %p\n", regs->r26, regs+1);
printk62arch/alpha/kernel/process.cprintk(" r0: %016lx  r1: %016lx  r2: %016lx  r3: %016lx\n",
printk64arch/alpha/kernel/process.cprintk(" r4: %016lx  r5: %016lx  r6: %016lx  r7: %016lx\n",
printk66arch/alpha/kernel/process.cprintk(" r8: %016lx r16: %016lx r17: %016lx r18: %016lx\n",
printk68arch/alpha/kernel/process.cprintk("r19: %016lx r20: %016lx r21: %016lx r22: %016lx\n",
printk70arch/alpha/kernel/process.cprintk("r23: %016lx r24: %016lx r25: %016lx r26: %016lx\n",
printk72arch/alpha/kernel/process.cprintk("r27: %016lx r28: %016lx r29: %016lx hae: %016lx\n",
printk32arch/alpha/kernel/ptrace.c# define DBG(fac,args)  {if ((fac) & debug_mask) printk args;}
printk179arch/alpha/kernel/ptrace.cprintk("ptrace: bad page directory %08lx\n", pgd_val(*pgdir));
printk189arch/alpha/kernel/ptrace.cprintk("ptrace: bad page middle %08lx\n", pmd_val(*pgmiddle));
printk230arch/alpha/kernel/ptrace.cprintk("ptrace: bad page directory %08lx\n", pgd_val(*pgdir));
printk240arch/alpha/kernel/ptrace.cprintk("ptrace: bad page middle %08lx\n", pmd_val(*pgmiddle));
printk294arch/alpha/kernel/ptrace.cprintk("Unable to find vma for addr 0x%lx\n",addr);
printk476arch/alpha/kernel/ptrace.cprintk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved);
printk28arch/alpha/kernel/traps.cprintk("%s(%d): %s %ld\n", current->comm, current->pid, str, err);
printk30arch/alpha/kernel/traps.cprintk("pc = [<%lx>] ps = %04lx\n", regs->pc, regs->ps);
printk31arch/alpha/kernel/traps.cprintk("rp = [<%lx>] sp = %lx\n", regs->r26, sp);
printk32arch/alpha/kernel/traps.cprintk("r0=%lx r1=%lx r2=%lx r3=%lx\n",
printk34arch/alpha/kernel/traps.cprintk("r8=%lx\n", regs->r8);
printk35arch/alpha/kernel/traps.cprintk("r16=%lx r17=%lx r18=%lx r19=%lx\n",
printk37arch/alpha/kernel/traps.cprintk("r20=%lx r21=%lx r22=%lx r23=%lx\n",
printk39arch/alpha/kernel/traps.cprintk("r24=%lx r25=%lx r26=%lx r27=%lx\n",
printk41arch/alpha/kernel/traps.cprintk("r28=%lx r29=%lx r30=%lx\n",
printk43arch/alpha/kernel/traps.cprintk("Code:");
printk46arch/alpha/kernel/traps.cprintk("%c%08x%c",i?' ':'<',pc[i],i?' ':'>');
printk47arch/alpha/kernel/traps.cprintk("\n");
printk67arch/alpha/kernel/traps.cprintk("Arithmetic trap at %016lx: %02lx %016lx\n",
printk191arch/alpha/kernel/traps.cprintk("kernel: unaligned trap at %016lx: %p %lx %ld\n",
printk217arch/alpha/kernel/traps.cprintk("Bad unaligned kernel access at %016lx: %p %lx %ld\n",
printk256arch/alpha/kernel/traps.cprintk("%s(%d): unaligned trap at %016lx: %p %lx %ld\n",
printk343arch/alpha/kernel/traps.cprintk("<sc %ld(%lx,%lx,%lx)>", regs.r0, a0, a1, a2);
printk291arch/alpha/math-emu/fp-emul.cprintk("alpha_fp_emul: unexpected function code %#lx at %#lx",
printk81arch/alpha/mm/fault.cprintk("memory violation at pc=%08lx (%08lx)\n", regs.pc, address);
printk90arch/alpha/mm/fault.cprintk(KERN_ALERT 
printk58arch/alpha/mm/init.cprintk("\nMem-info:\n");
printk60arch/alpha/mm/init.cprintk("Free swap:       %6dkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
printk71arch/alpha/mm/init.cprintk("%d pages of RAM\n",total);
printk72arch/alpha/mm/init.cprintk("%d free pages\n",free);
printk73arch/alpha/mm/init.cprintk("%d reserved pages\n",reserved);
printk74arch/alpha/mm/init.cprintk("%d pages shared\n",shared);
printk170arch/alpha/mm/init.cprintk("Memory: %luk available\n", tmp >> 10);
printk142arch/i386/kernel/bios32.cprintk("bios32_service(%ld) : not present\n", service);
printk145arch/i386/kernel/bios32.cprintk("bios32_service(%ld) : returned 0x%x, mail drew@colorado.edu\n",
printk184arch/i386/kernel/bios32.cprintk ("pcibios_init : %s : BIOS32 Service Directory says PCI BIOS is present,\n"
printk196arch/i386/kernel/bios32.cprintk ("pcibios_init : PCI BIOS revision %x.%02x entry at 0x%lx\n",
printk432arch/i386/kernel/bios32.cprintk("pcibios_init : unsupported revision %d at 0x%p, mail drew@colorado.edu\n",
printk436arch/i386/kernel/bios32.cprintk ("pcibios_init : BIOS32 Service Directory structure at 0x%p\n", check);
printk439arch/i386/kernel/bios32.cprintk("pcibios_init: entry in high memory, unable to access\n");
printk442arch/i386/kernel/bios32.cprintk ("pcibios_init : BIOS32 Service Directory entry at 0x%lx\n", bios32_entry);
printk445arch/i386/kernel/bios32.cprintk ("pcibios_init : multiple entries, mail drew@colorado.edu\n");
printk361arch/i386/kernel/head.Scall SYMBOL_NAME(printk)
printk289arch/i386/kernel/irq.cprintk("Trying to free IRQ%d\n",irq);
printk293arch/i386/kernel/irq.cprintk("Trying to free free IRQ%d\n",irq);
printk365arch/i386/kernel/irq.cprintk("probe_irq_on:  irqs=0x%04x irqmask=0x%04x\n", irqs, irqmask);
printk381arch/i386/kernel/irq.cprintk("probe_irq_off: irqs=0x%04x irqmask=0x%04x\n", irqs, irqmask);
printk412arch/i386/kernel/irq.cprintk("Unable to get IRQ2 for cascade.\n");
printk415arch/i386/kernel/irq.cprintk("Unable to get IRQ13 for math-error handler.\n");
printk418arch/i386/kernel/irq.cprintk("Unable to get IRQ13 for IPI.\n");
printk191arch/i386/kernel/process.cprintk("\n");
printk192arch/i386/kernel/process.cprintk("EIP: %04x:[<%08lx>]",0xffff & regs->cs,regs->eip);
printk194arch/i386/kernel/process.cprintk(" ESP: %04x:%08lx",0xffff & regs->ss,regs->esp);
printk195arch/i386/kernel/process.cprintk(" EFLAGS: %08lx\n",regs->eflags);
printk196arch/i386/kernel/process.cprintk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
printk198arch/i386/kernel/process.cprintk("ESI: %08lx EDI: %08lx EBP: %08lx",
printk200arch/i386/kernel/process.cprintk(" DS: %04x ES: %04x FS: %04x GS: %04x\n",
printk101arch/i386/kernel/ptrace.cprintk("ptrace: bad page directory %08lx\n", pgd_val(*pgdir));
printk111arch/i386/kernel/ptrace.cprintk("ptrace: bad page middle %08lx\n", pmd_val(*pgmiddle));
printk152arch/i386/kernel/ptrace.cprintk("ptrace: bad page directory %08lx\n", pgd_val(*pgdir));
printk162arch/i386/kernel/ptrace.cprintk("ptrace: bad page middle %08lx\n", pmd_val(*pgmiddle));
printk119arch/i386/kernel/smp.cprintk("Bad signature [%c%c%c%c].\n",
printk128arch/i386/kernel/smp.cprintk("Checksum error.\n");
printk133arch/i386/kernel/smp.cprintk("Unsupported version (%d)\n",mpc->mpc_spec);
printk138arch/i386/kernel/smp.cprintk("OEM ID: %s ",str);
printk141arch/i386/kernel/smp.cprintk("Product ID: %s ",str);
printk142arch/i386/kernel/smp.cprintk("APIC at: 0x%lX\n",mpc->mpc_lapic);
printk158arch/i386/kernel/smp.cprintk("Processor #%d %s APIC version %d\n",
printk166arch/i386/kernel/smp.cprintk("    Floating point unit present.\n");
printk168arch/i386/kernel/smp.cprintk("    Machine Exception supported.\n");
printk170arch/i386/kernel/smp.cprintk("    64 bit compare & exchange supported.\n");
printk172arch/i386/kernel/smp.cprintk("    Internal APIC present.\n");
printk175arch/i386/kernel/smp.cprintk("    Bootup CPU\n");
printk183arch/i386/kernel/smp.cprintk("Processor #%d unused. (Max %d processors).\n",m->mpc_apicid, NR_CPUS);
printk197arch/i386/kernel/smp.cprintk("Bus #%d is %s\n",
printk211arch/i386/kernel/smp.cprintk("I/O APIC #%d Version %d at 0x%lX.\n",
printk240arch/i386/kernel/smp.cprintk("Warning: Multiple APIC's not supported.\n");
printk257arch/i386/kernel/smp.cprintk("Error: MPF size\n");
printk268arch/i386/kernel/smp.cprintk("Intel multiprocessing (MPv1.1) available.\n");
printk270arch/i386/kernel/smp.cprintk("    IMCR and PIC mode supported.\n");
printk278arch/i386/kernel/smp.cprintk("I/O APIC at 0xFEC00000.\n");
printk279arch/i386/kernel/smp.cprintk("Bus#0 is ");
printk284arch/i386/kernel/smp.cprintk("ISA");
printk287arch/i386/kernel/smp.cprintk("EISA with no IRQ8 chaining");
printk290arch/i386/kernel/smp.cprintk("EISA");
printk293arch/i386/kernel/smp.cprintk("MCA");
printk296arch/i386/kernel/smp.cprintk("ISA\nBus#1 is PCI");
printk299arch/i386/kernel/smp.cprintk("EISA\nBus #1 is PCI");
printk302arch/i386/kernel/smp.cprintk("MCA\nBus #1 is PCI");
printk307arch/i386/kernel/smp.cprintk("???\nUnknown standard configuration %d\n",
printk319arch/i386/kernel/smp.cprintk("Processors: %d\n", num_processors);
printk511arch/i386/kernel/smp.cprintk("Booting processor %d stack %p: ",i,stack);      /* So we set whats up   */
printk537arch/i386/kernel/smp.cprintk("Processor refused startup request.\n");
printk555arch/i386/kernel/smp.cprintk("Stuck ??\n");
printk557arch/i386/kernel/smp.cprintk("Not responding.\n");
printk568arch/i386/kernel/smp.cprintk("Error: only one processor found.\n");
printk579arch/i386/kernel/smp.cprintk("Total of %d processors activated (%lu.%02lu BogoMIPS).\n", 
printk685arch/i386/kernel/smp.cprintk("CPU #%d: previous IPI still not cleared after 10mS", smp_processor_id());
printk803arch/i386/kernel/smp.cprintk("Beginning scheduling on CPU#%d\n",smp_processor_id());
printk930arch/i386/kernel/smp.cprintk("CPU #%d sent invalid cross CPU message to CPU #%d: %X(%lX).\n",
printk114arch/i386/kernel/traps.cprintk("%s: %04lx\n", str, err & 0xffff);
printk115arch/i386/kernel/traps.cprintk("CPU:    %d\n", smp_processor_id());
printk116arch/i386/kernel/traps.cprintk("EIP:    %04x:[<%08lx>]\nEFLAGS: %08lx\n", 0xffff & regs->cs,regs->eip,regs->eflags);
printk117arch/i386/kernel/traps.cprintk("eax: %08lx   ebx: %08lx   ecx: %08lx   edx: %08lx\n",
printk119arch/i386/kernel/traps.cprintk("esi: %08lx   edi: %08lx   ebp: %08lx   esp: %08lx\n",
printk121arch/i386/kernel/traps.cprintk("ds: %04x   es: %04x   fs: %04x   gs: %04x   ss: %04x\n",
printk125arch/i386/kernel/traps.cprintk("Corrupted stack page\n");
printk126arch/i386/kernel/traps.cprintk("Process %s (pid: %d, process nr: %d, stackpage=%08lx)\nStack: ",
printk133arch/i386/kernel/traps.cprintk("\n       ");
printk134arch/i386/kernel/traps.cprintk("%08lx ", get_seg_long(ss,stack++));
printk136arch/i386/kernel/traps.cprintk("\nCall Trace: ");
printk155arch/i386/kernel/traps.cprintk("\n       ");
printk156arch/i386/kernel/traps.cprintk("[<%08lx>] ", addr);
printk160arch/i386/kernel/traps.cprintk("\nCode: ");
printk162arch/i386/kernel/traps.cprintk("%02x ",0xff & get_seg_byte(regs->cs,(i+(char *)regs->eip)));
printk163arch/i386/kernel/traps.cprintk("\n");
printk199arch/i386/kernel/traps.cprintk("Uhhuh. NMI received. Dazed and confused, but trying to continue\n");
printk200arch/i386/kernel/traps.cprintk("You probably have a hardware problem with your RAM chips or a\n");
printk201arch/i386/kernel/traps.cprintk("power saving mode enabled.\n");
printk340arch/i386/kernel/traps.cprintk("math-emulation not enabled and no coprocessor found.\n");
printk341arch/i386/kernel/traps.cprintk("killing %s.\n",current->comm);
printk58arch/i386/kernel/vm86.cprintk("no vm86_info: BAD\n");
printk81arch/i386/kernel/vm86.cprintk("vm86: bad pgd entry [%p]:%08lx\n", pgd, pgd_val(*pgd));
printk89arch/i386/kernel/vm86.cprintk("vm86: bad pmd entry [%p]:%08lx\n", pmd, pmd_val(*pmd));
printk44arch/i386/math-emu/errors.cprintk("Unimplemented FPU Opcode at eip=%p : ", (void *) address);
printk51arch/i386/math-emu/errors.cprintk("[%02x]", byte1);
printk54arch/i386/math-emu/errors.cprintk("%02x ", byte1);
printk58arch/i386/math-emu/errors.cprintk("%02x (%02x+%d)\n", FPU_modrm, FPU_modrm & 0xf8, FPU_modrm & 7);
printk60arch/i386/math-emu/errors.cprintk("/%d\n", (FPU_modrm >> 3) & 7);
printk64arch/i386/math-emu/errors.cprintk("cs selector = %04x\n", FPU_CS);
printk95arch/i386/math-emu/errors.cprintk("At %p:", (void *) address);
printk104arch/i386/math-emu/errors.cprintk(" %02x", byte1);
printk107arch/i386/math-emu/errors.cprintk(" [%02x]", byte1);
printk111arch/i386/math-emu/errors.cprintk(" [more..]\n");
printk117arch/i386/math-emu/errors.cprintk(" %02x (%02x+%d)\n", FPU_modrm, FPU_modrm & 0xf8, FPU_modrm & 7);
printk119arch/i386/math-emu/errors.cprintk(" /%d, mod=%d rm=%d\n",
printk125arch/i386/math-emu/errors.cprintk("%04x\n", FPU_CS);
printk131arch/i386/math-emu/errors.cif ( partial_status & SW_Backward )    printk("SW: backward compatibility\n");
printk132arch/i386/math-emu/errors.cif ( partial_status & SW_C3 )          printk("SW: condition bit 3\n");
printk133arch/i386/math-emu/errors.cif ( partial_status & SW_C2 )          printk("SW: condition bit 2\n");
printk134arch/i386/math-emu/errors.cif ( partial_status & SW_C1 )          printk("SW: condition bit 1\n");
printk135arch/i386/math-emu/errors.cif ( partial_status & SW_C0 )          printk("SW: condition bit 0\n");
printk136arch/i386/math-emu/errors.cif ( partial_status & SW_Summary )     printk("SW: exception summary\n");
printk137arch/i386/math-emu/errors.cif ( partial_status & SW_Stack_Fault ) printk("SW: stack fault\n");
printk138arch/i386/math-emu/errors.cif ( partial_status & SW_Precision )   printk("SW: loss of precision\n");
printk139arch/i386/math-emu/errors.cif ( partial_status & SW_Underflow )   printk("SW: underflow\n");
printk140arch/i386/math-emu/errors.cif ( partial_status & SW_Overflow )    printk("SW: overflow\n");
printk141arch/i386/math-emu/errors.cif ( partial_status & SW_Zero_Div )    printk("SW: divide by zero\n");
printk142arch/i386/math-emu/errors.cif ( partial_status & SW_Denorm_Op )   printk("SW: denormalized operand\n");
printk143arch/i386/math-emu/errors.cif ( partial_status & SW_Invalid )     printk("SW: invalid operation\n");
printk146arch/i386/math-emu/errors.cprintk(" SW: b=%d st=%ld es=%d sf=%d cc=%d%d%d%d ef=%d%d%d%d%d%d\n",
printk157arch/i386/math-emu/errors.cprintk(" CW: ic=%d rc=%ld%ld pc=%ld%ld iem=%d     ef=%d%d%d%d%d%d\n",
printk176arch/i386/math-emu/errors.cprintk("st(%d)  %c .0000 0000 0000 0000         ",
printk184arch/i386/math-emu/errors.cprintk("st(%d)  %c .%04lx %04lx %04lx %04lx e%+-6ld ", i,
printk193arch/i386/math-emu/errors.cprintk("Whoops! Error in errors.c      ");
printk196arch/i386/math-emu/errors.cprintk("%s\n", tag_desc[(int) (unsigned) r->tag]);
printk200arch/i386/math-emu/errors.cprintk("[data] %c .%04lx %04lx %04lx %04lx e%+-6ld ",
printk207arch/i386/math-emu/errors.cprintk("%s\n", tag_desc[(int) (unsigned) FPU_loaded_data.tag]);
printk338arch/i386/math-emu/errors.cprintk(FPU_VERSION" "__DATE__" (C) W. Metzenthen.\n");
printk349arch/i386/math-emu/errors.cprintk("FP Exception: %s!\n", exception_names[i].name);
printk353arch/i386/math-emu/errors.cprintk("FPU emulator: Unknown Exception: 0x%04x!\n", n);
printk357arch/i386/math-emu/errors.cprintk("FPU emulator: Internal error type 0x%04x\n", int_type);
printk45arch/i386/math-emu/exception.h#define  EXCEPTION(x)  { printk("exception in %s at line %d\n", \
printk150arch/i386/math-emu/fpu_entry.cprintk("ERROR: wm-FPU-emu is not RE-ENTRANT!\n");
printk186arch/i386/math-emu/fpu_entry.cprintk("math_emulate: %04x:%08lx\n",FPU_CS,FPU_EIP);
printk196arch/i386/math-emu/fpu_entry.cprintk("FPU emulator: Unsupported addressing mode\n");
printk226arch/i386/math-emu/fpu_entry.cprintk("FPU emulator: Unknown prefix byte 0x%02x, probably due to\n"
printk688arch/i386/math-emu/fpu_entry.cprintk("ERROR: wm-FPU-emu math_abort failed!\n");
printk90arch/i386/mm/fault.cprintk("WP fault at %08x\n", regs->eip);
printk120arch/i386/mm/fault.cprintk("This processor honours the WP bit even when in supervisor mode. Good.\n");
printk124arch/i386/mm/fault.cprintk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
printk127arch/i386/mm/fault.cprintk(KERN_ALERT "Unable to handle kernel paging request");
printk128arch/i386/mm/fault.cprintk(" at virtual address %08lx\n",address);
printk130arch/i386/mm/fault.cprintk(KERN_ALERT "current->tss.cr3 = %08lx, %%cr3 = %08lx\n",
printk133arch/i386/mm/fault.cprintk(KERN_ALERT "*pde = %08lx\n", page);
printk138arch/i386/mm/fault.cprintk(KERN_ALERT "*pte = %08lx\n", page);
printk77arch/i386/mm/init.cprintk("Mem-info:\n");
printk79arch/i386/mm/init.cprintk("Free swap:       %6dkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
printk90arch/i386/mm/init.cprintk("%d pages of RAM\n",total);
printk91arch/i386/mm/init.cprintk("%d free pages\n",free);
printk92arch/i386/mm/init.cprintk("%d reserved pages\n",reserved);
printk93arch/i386/mm/init.cprintk("%d pages shared\n",shared);
printk252arch/i386/mm/init.cprintk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data)\n",
printk424arch/mips/kernel/gdb-stub.cprintk("in handle_exception()\n");
printk730arch/mips/kernel/gdb-stub.cprintk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
printk733arch/mips/kernel/gdb-stub.cprintk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
printk736arch/mips/kernel/gdb-stub.cprintk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
printk739arch/mips/kernel/gdb-stub.cprintk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
printk746arch/mips/kernel/gdb-stub.cprintk("epc  : %08lx\nStatus: %08lx\nCause : %08lx\n",
printk218arch/mips/kernel/irq.cprintk("Trying to free IRQ%d\n",irq);
printk222arch/mips/kernel/irq.cprintk("Trying to free free IRQ%d\n",irq);
printk269arch/mips/kernel/irq.cprintk("probe_irq_on:  irqs=0x%04x irqmask=0x%04x\n", irqs, irqmask);
printk285arch/mips/kernel/irq.cprintk("probe_irq_off: irqs=0x%04x irqmask=0x%04x\n", irqs, irqmask);
printk321arch/mips/kernel/irq.cprintk("Unable to get IRQ2 for cascade\n");
printk62arch/mips/kernel/jazzdma.cprintk("VDMA: R4030 DMA pagetables initialized.\n");
printk84arch/mips/kernel/jazzdma.cprintk("vdma_alloc: Invalid physical address: %08lx\n",paddr);
printk90arch/mips/kernel/jazzdma.cprintk("vdma_alloc: Invalid size: %08lx\n",size);
printk132arch/mips/kernel/jazzdma.cprintk("vdma_alloc: Allocated %d pages starting from %08lx\n",
printk137arch/mips/kernel/jazzdma.cprintk("LADDR: ");
printk139arch/mips/kernel/jazzdma.cprintk("%08x ",i<<12);
printk140arch/mips/kernel/jazzdma.cprintk("\nPADDR: ");
printk142arch/mips/kernel/jazzdma.cprintk("%08x ",entry[i].frame);
printk143arch/mips/kernel/jazzdma.cprintk("\nOWNER: ");
printk145arch/mips/kernel/jazzdma.cprintk("%08x ",entry[i].owner);
printk146arch/mips/kernel/jazzdma.cprintk("\n");
printk166arch/mips/kernel/jazzdma.cprintk("vdma_free: trying to free other's dma pages, laddr=%8lx\n",
printk178arch/mips/kernel/jazzdma.cprintk("vdma_free: freed %ld pages starting from %08lx\n",
printk197arch/mips/kernel/jazzdma.cprintk("vdma_map: Invalid logical address: %08lx\n",laddr);
printk203arch/mips/kernel/jazzdma.cprintk("vdma_map: Invalid physical address: %08lx\n",paddr);
printk210arch/mips/kernel/jazzdma.cprintk("vdma_remap: first=%x, pages=%x\n",first,pages);
printk214arch/mips/kernel/jazzdma.cprintk("vdma_alloc: Invalid size: %08lx\n",size);
printk224arch/mips/kernel/jazzdma.cprintk("Trying to remap other's pages.\n");
printk242arch/mips/kernel/jazzdma.cprintk("LADDR: ");
printk244arch/mips/kernel/jazzdma.cprintk("%08x ",i<<12);
printk245arch/mips/kernel/jazzdma.cprintk("\nPADDR: ");
printk247arch/mips/kernel/jazzdma.cprintk("%08x ",pgtbl[i].frame);
printk248arch/mips/kernel/jazzdma.cprintk("\nOWNER: ");
printk250arch/mips/kernel/jazzdma.cprintk("%08x ",pgtbl[i].owner);
printk251arch/mips/kernel/jazzdma.cprintk("\n");
printk321arch/mips/kernel/jazzdma.cprintk("vdma_stats: CONFIG: %08x\n",
printk323arch/mips/kernel/jazzdma.cprintk("R4030 translation table base: %08x\n",
printk325arch/mips/kernel/jazzdma.cprintk("R4030 translation table limit: %08x\n",
printk327arch/mips/kernel/jazzdma.cprintk("vdma_stats: INV_ADDR: %08x\n",
printk329arch/mips/kernel/jazzdma.cprintk("vdma_stats: R_FAIL_ADDR: %08x\n",
printk331arch/mips/kernel/jazzdma.cprintk("vdma_stats: M_FAIL_ADDR: %08x\n",
printk333arch/mips/kernel/jazzdma.cprintk("vdma_stats: IRQ_SOURCE: %08x\n",
printk335arch/mips/kernel/jazzdma.cprintk("vdma_stats: I386_ERROR: %08x\n",
printk337arch/mips/kernel/jazzdma.cprintk("vdma_chnl_modes:   ");
printk339arch/mips/kernel/jazzdma.cprintk("%04x ",
printk341arch/mips/kernel/jazzdma.cprintk("\n");
printk342arch/mips/kernel/jazzdma.cprintk("vdma_chnl_enables: ");
printk344arch/mips/kernel/jazzdma.cprintk("%04x ",
printk346arch/mips/kernel/jazzdma.cprintk("\n");
printk361arch/mips/kernel/jazzdma.cprintk("vdma_enable: channel %d\n",channel);
printk368arch/mips/kernel/jazzdma.cprintk("VDMA: Channel %d: Address error!\n",channel);
printk370arch/mips/kernel/jazzdma.cprintk("VDMA: Channel %d: Memory error!\n",channel);
printk395arch/mips/kernel/jazzdma.cprintk("vdma_disable: channel %d\n",channel);
printk396arch/mips/kernel/jazzdma.cprintk("VDMA: channel %d status: %04x (%s) mode: "
printk427arch/mips/kernel/jazzdma.cprintk("vdma_set_mode: channel %d, mode 0x%x\n",channel,mode);
printk451arch/mips/kernel/jazzdma.cprintk("VDMA: Audio DMA not supported yet.\n");
printk455arch/mips/kernel/jazzdma.cprintk("VDMA: vdma_set_mode() called with unsupported channel %d!\n",
printk474arch/mips/kernel/jazzdma.cprintk("VDMA: vdma_set_mode() called with unknown dma mode 0x%x\n",mode);
printk484arch/mips/kernel/jazzdma.cprintk("vdma_set_addr: channel %d, addr %lx\n",channel,addr);
printk495arch/mips/kernel/jazzdma.cprintk("vdma_set_count: channel %d, count %08x\n",channel,(unsigned)count);
printk510arch/mips/kernel/jazzdma.cprintk("vdma_get_residual: channel %d: residual=%d\n",channel,residual);
printk74arch/mips/kernel/process.cprintk("$0 : %08x %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
printk77arch/mips/kernel/process.cprintk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
printk80arch/mips/kernel/process.cprintk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
printk83arch/mips/kernel/process.cprintk("$24: %08lx %08lx                   %08lx %08lx %08lx %08lx\n",
printk90arch/mips/kernel/process.cprintk("epc  : %08lx\nStatus: %08lx\nCause : %08lx\n",
printk99arch/mips/kernel/ptrace.cprintk("ptrace: bad page directory %08lx\n", pgd_val(*pgdir));
printk139arch/mips/kernel/ptrace.cprintk("ptrace: bad page directory %08lx\n", pgd_val(*pgdir));
printk148arch/mips/kernel/syscall.cprintk("%s: syscall in branch delay slot.\n", current->comm);
printk176arch/mips/kernel/syscall.cprintk("unaligned usp\n");
printk97arch/mips/kernel/traps.cprintk("%s: %08lx\n", str, err );
printk105arch/mips/kernel/traps.cprintk("Corrupted stack page\n");
printk106arch/mips/kernel/traps.cprintk("Process %s (pid: %d, stackpage=%08lx)\nStack: ",
printk109arch/mips/kernel/traps.cprintk("%08x ", *sp++);
printk115arch/mips/kernel/traps.cprintk("\n       ");
printk116arch/mips/kernel/traps.cprintk("%08lx ", get_user(stack++));
printk118arch/mips/kernel/traps.cprintk("\nCall Trace: ");
printk137arch/mips/kernel/traps.cprintk("\n       ");
printk138arch/mips/kernel/traps.cprintk("%08x ", addr);
printk143arch/mips/kernel/traps.cprintk("\nCode : ");
printk150arch/mips/kernel/traps.cprintk("%08x ", *pc++);
printk151arch/mips/kernel/traps.cprintk("\n");
printk154arch/mips/kernel/traps.cprintk("(Bad address in epc)\n");
printk162arch/mips/kernel/traps.cprintk("Received address error (ade%c)\n", write ? 's' : 'l');
printk193arch/mips/kernel/traps.cprintk("Process %d\n", task[i]->pid);
printk259arch/mips/kernel/traps.cprintk("Process %d\n", task[i]->pid);
printk410arch/mips/kernel/traps.cprintk("Detected unsupported CPU type %s.\n",
printk120arch/mips/kernel/tyne-c.cprintk ("Deskstation Tyne DMA (%luk) buffer initialized.\n",
printk34arch/mips/mm/fault.cprintk("do_page_fault() #1: %s %08lx (epc == %08lx, ra == %08lx)\n",
printk80arch/mips/mm/fault.cprintk(KERN_ALERT "Unable to handle kernel paging request at virtual "
printk204arch/mips/mm/init.cprintk("Mem-info:\n");
printk206arch/mips/mm/init.cprintk("Free swap:       %6dkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
printk217arch/mips/mm/init.cprintk("%d pages of RAM\n", total);
printk218arch/mips/mm/init.cprintk("%d free pages\n", free);
printk219arch/mips/mm/init.cprintk("%d reserved pages\n", reserved);
printk220arch/mips/mm/init.cprintk("%d pages shared\n", shared);
printk279arch/mips/mm/init.cprintk("Memory: %luk/%luk available (%dk kernel code, %dk data)\n",
printk149arch/ppc/kernel/irq.cprintk("*** WARNING! %s handler [IRQ %d] turned interrupts on!\n", action->name, irq);
printk180arch/ppc/kernel/irq.cprintk("IRQ 0x20 = %x, 0x21 = %x/%x, 0xA0 = %x, 0xA1 = %x/%x\n",
printk255arch/ppc/kernel/irq.cprintk("Trying to free IRQ%d\n",irq);
printk259arch/ppc/kernel/irq.cprintk("Trying to free free IRQ%d\n",irq);
printk308arch/ppc/kernel/irq.cprintk("probe_irq_on:  irqs=0x%04x irqmask=0x%04x\n", irqs, irqmask);
printk324arch/ppc/kernel/irq.cprintk("probe_irq_off: irqs=0x%04x irqmask=0x%04x\n", irqs, irqmask);
printk351arch/ppc/kernel/irq.cprintk("Unable to get IRQ2 for cascade\n");
printk17arch/ppc/kernel/pci.cprintk("PPC init stub -- cort\n");
printk236arch/ppc/kernel/pci.cprintk("pcibios_find_class\n");
printk154arch/ppc/kernel/process.cprintk("Start thread [%x] at PC: %x, SR: %x, SP: %x\n",
printk169arch/ppc/kernel/process.cprintk("process.c: sys_fork() called\n");
printk195arch/ppc/kernel/process.cprintk("EXECVE - file = '%s', error = %d\n", filename, error);
printk225arch/ppc/kernel/process.cprintk("... Call backtrace:\n");
printk228arch/ppc/kernel/process.cprintk("%08X ", sp[2]);
printk232arch/ppc/kernel/process.cprintk("\n");
printk236arch/ppc/kernel/process.cprintk("\n");
printk1146arch/ppc/kernel/raw_printf.cprintk("%06X: ", (int)p - (int)base);
printk1149arch/ppc/kernel/raw_printf.cprintk("%06X: ", p);
printk1155arch/ppc/kernel/raw_printf.cprintk("%02X", p[i] & 0xFF);
printk1158arch/ppc/kernel/raw_printf.cprintk("  ");
printk1160arch/ppc/kernel/raw_printf.cif ((i % 2) == 1) printk(" ");
printk1161arch/ppc/kernel/raw_printf.cif ((i % 8) == 7) printk(" ");
printk1163arch/ppc/kernel/raw_printf.cprintk(" |");
printk1174arch/ppc/kernel/raw_printf.cprintk("%c", c);
printk1176arch/ppc/kernel/raw_printf.cprintk("|\n");
printk34arch/ppc/kernel/signal.cprintk("Task: %x[%d] - SIGSUSPEND at %x, Mask: %x\n", current, current->pid, regs->nip, set);  
printk24arch/ppc/kernel/stubs.cprintk("Panic: %s\n", msg);
printk41arch/ppc/kernel/stubs.cprintk("IP CKSUM(%x, %d) = %x\n", buf, len, _val);
printk54arch/ppc/kernel/stubs.cprintk("Compute IP CKSUM(%x, %d) = %x\n", buf, len, _val);
printk70arch/ppc/kernel/stubs.cprintk("UDP CSUM(%x,%d,%x,%x) = %x\n", buf, len, saddr, daddr, _val);
printk88arch/ppc/kernel/stubs.cprintk("TCP CSUM(%x,%d,%x,%x) = %x\n", buf, len, saddr, daddr, _val);
printk47arch/ppc/kernel/traps.cprintk("Failure in kernel at PC: %x, MSR: %x\n", regs->nip, regs->msr);
printk56arch/ppc/kernel/traps.cprintk("Machine check at PC: %x[%x], SR: %x\n", regs->nip, va_to_phys(regs->nip), regs->msr);
printk59arch/ppc/kernel/traps.cprintk("Error regs = %08X", *eagle_id);
printk61arch/ppc/kernel/traps.cprintk("/%08X", *eagle_id);
printk63arch/ppc/kernel/traps.cprintk("/%08X\n", *eagle_id);
printk70arch/ppc/kernel/traps.cprintk("Program check at PC: %x[%x], SR: %x\n", regs->nip, va_to_phys(regs->nip), regs->msr);
printk76arch/ppc/kernel/traps.cprintk("Floating point check at PC: %x[%x], SR: %x\n", regs->nip, va_to_phys(regs->nip), regs->msr);
printk82arch/ppc/kernel/traps.cprintk("Alignment error at PC: %x[%x], SR: %x\n", regs->nip, va_to_phys(regs->nip), regs->msr);
printk88arch/ppc/kernel/traps.cprintk("Kernel stack overflow at PC: %x[%x], SR: %x\n", regs->nip, va_to_phys(regs->nip), regs->msr);
printk96arch/ppc/kernel/traps.cprintk("NIP: %08X, MSR: %08X, XER: %08X, LR: %08X, FRAME: %08X\n", regs->nip, regs->msr, regs->xer, regs->link, regs);
printk97arch/ppc/kernel/traps.cprintk("HASH = %08X/%08X, MISS = %08X/%08X, CMP = %08X/%08X\n", regs->hash1, regs->hash2, regs->imiss, regs->dmiss, regs->icmp, regs->dcmp);
printk98arch/ppc/kernel/traps.cprintk("TASK = %x[%d] '%s'\n", current, current->pid, current->comm);
printk103arch/ppc/kernel/traps.cprintk("GPR%02d: ", i);
printk105arch/ppc/kernel/traps.cprintk("%08X ", regs->gpr[i]);
printk108arch/ppc/kernel/traps.cprintk("\n");
printk117arch/ppc/kernel/traps.cprintk("Task: %08X(%d), PC: %08X/%08X, Syscall: %3d, Result: %d\n", current, current->pid, regs->nip, regs->link, regs->gpr[0], regs->gpr[3]);
printk42arch/ppc/mm/fault.cprintk("Data Access Fault - Loc: %x, DSISR: %x, PC: %x", regs->dar, regs->dsisr, regs->nip);
printk43arch/ppc/mm/fault.cprintk(" PR: %d\n", regs->msr &&(1<<14));
printk48arch/ppc/mm/fault.cprintk("Write Protect Fault - Loc: %x, DSISR: %x, PC: %x\n", regs->dar, regs->dsisr, regs->nip);
printk65arch/ppc/mm/fault.cprintk("Page mapped - PTE: %x[%x]\n", pte, *(long *)pte);
printk73arch/ppc/mm/fault.cprintk("No PGD\n");
printk109arch/ppc/mm/fault.cprintk("Page mapped - PTE: %x[%x]\n", pte, *(long *)pte);
printk120arch/ppc/mm/fault.cprintk("No PGD\n");
printk151arch/ppc/mm/fault.cprintk("notinmap: current: %x; mm: %x; mmap: %x; vma: %x to %x flags: %x\n",
printk215arch/ppc/mm/fault.cprintk("vma = %x VM_READ = %x VM_EXEC = %x\n",
printk217arch/ppc/mm/fault.cprintk("vma->vm_start = %x vma->vm_end = %d\n",
printk219arch/ppc/mm/fault.cprintk("error_code = %x\n", error_code);      
printk220arch/ppc/mm/fault.cprintk("regs = %x\n", regs);
printk221arch/ppc/mm/fault.cprintk("vma->vm_flags = %x\n", vma->vm_flags);
printk132arch/ppc/mm/init.cprintk("Mem-info:\n");
printk134arch/ppc/mm/init.cprintk("Free swap:       %6dkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
printk145arch/ppc/mm/init.cprintk("%d pages of RAM\n",total);
printk146arch/ppc/mm/init.cprintk("%d free pages\n",free);
printk147arch/ppc/mm/init.cprintk("%d reserved pages\n",reserved);
printk148arch/ppc/mm/init.cprintk("%d pages shared\n",shared);
printk218arch/ppc/mm/init.cprintk("Mem init - Start: %x, End: %x\n", start_mem, high_memory);
printk257arch/ppc/mm/init.cprintk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data)\n",
printk622arch/ppc/mm/init.cprintk("Map VA: %08X, Slot: %08X[%08X/%08X], H: %d\n", va, slot, slot0, slot1, h);
printk623arch/ppc/mm/init.cprintk("Slot0:\n");
printk627arch/ppc/mm/init.cprintk("  V: %d, VSID: %05x, H: %d, RPN: %04x, R: %d, C: %d, PP: %x\n", _pte->v, _pte->vsid, _pte->h, _pte->rpn, _pte->r, _pte->c, _pte->pp);
printk629arch/ppc/mm/init.cprintk("Slot1:\n");
printk633arch/ppc/mm/init.cprintk("  V: %d, VSID: %05x, H: %d, RPN: %04x, R: %d, C: %d, PP: %x\n", _pte->v, _pte->vsid, _pte->h, _pte->rpn, _pte->r, _pte->c, _pte->pp);
printk636arch/ppc/mm/init.cprintk("Last mappings:\n");
printk639arch/ppc/mm/init.cprintk("  VA: %08x, PA: %08X, TASK: %08X\n",
printk29arch/sparc/boot/init_me.cvoid (*printk)(const char *str, ...);
printk35arch/sparc/boot/init_me.cprintk = romvec->pv_printf;
printk46arch/sparc/kernel/c_mp.cprintk("cpu%d done spinning\n", get_cpuid());
printk56arch/sparc/kernel/idprom.cprintk("TYPE: %s\n", Sun_Machines[i].name);
printk61arch/sparc/kernel/idprom.cprintk("TYPE: %s\n", system_name);
printk67arch/sparc/kernel/idprom.cprintk("Uh oh, IDPROM had bogus id_machtype value <%x>\n", machtyp);
printk80arch/sparc/kernel/idprom.cprintk("Ethernet address: %x:%x:%x:%x:%x:%x\n",
printk112arch/sparc/kernel/idprom.cprintk("find_vac_size: Can't determine size of VAC, bailing out...\n");
printk143arch/sparc/kernel/idprom.cprintk("find_vac_linesize: Can't determine VAC linesize, bailing out...\n");
printk65arch/sparc/kernel/ioport.cprintk ("alloc_io: Mapping ouside IOBASE area\n");
printk69arch/sparc/kernel/ioport.cprintk ("alloc_io: 0x%lx is already in use\n", vaddr);
printk103arch/sparc/kernel/ioport.cprintk ("alloc_dma: 0x%lx is already in use\n", vaddr);
printk107arch/sparc/kernel/ioport.cprintk ("alloc_dvma: out of dvma memory\n");
printk71arch/sparc/kernel/irq.cprintk("IRQ routines not yet written for the sun4m\n");
printk124arch/sparc/kernel/irq.cprintk("IRQ routines not written for the sun4m yet.\n");
printk189arch/sparc/kernel/irq.cprintk("Trying to free bogus IRQ %d\n", irq);
printk193arch/sparc/kernel/irq.cprintk("Trying to free free IRQ%d\n", irq);
printk210arch/sparc/kernel/irq.cprintk("IO device interrupt, irq = %d\n", irq);
printk211arch/sparc/kernel/irq.cprintk("PC = %08lx NPC = %08lx FP=%08lx\n", regs->pc, 
printk213arch/sparc/kernel/irq.cprintk("Expecting: ");
printk218arch/sparc/kernel/irq.cprintk("AIEEE\n");
printk260arch/sparc/kernel/irq.cprintk("Got FAST_IRQ number %04lx\n", (long unsigned int) irq);
printk174arch/sparc/kernel/probe.cprintk("DEBUG: psr.impl = 0x%x   psr.vers = 0x%x\n", psr_impl, 
printk186arch/sparc/kernel/probe.cprintk("DEBUG: psr.impl = 0x%x  fsr.vers = 0x%x\n", psr_impl,
printk191arch/sparc/kernel/probe.cprintk("cpu%d CPU: %s \n", cpuid, sparc_cpu_type[cpuid]);
printk192arch/sparc/kernel/probe.cprintk("cpu%d FPU: %s \n", cpuid, sparc_fpu_type[cpuid]);
printk215arch/sparc/kernel/probe.cprintk("probe_vac: Didn't expect vac-linesize of %d, halting\n",
printk225arch/sparc/kernel/probe.cprintk("SUN4C: VAC size %d line size %d using %s flushes ",
printk229arch/sparc/kernel/probe.cprintk("WEIRD Sun4C VAC cache size, tell davem");
printk244arch/sparc/kernel/probe.cprintk("WEIRD Sun4C VAC cache line size, tell davem\n");
printk257arch/sparc/kernel/probe.cprintk("WEIRD Sun4C VAC cache line size, tell davem\n");
printk265arch/sparc/kernel/probe.cprintk("enabled\n");
printk288arch/sparc/kernel/probe.cprintk("cpu%d MMU segmaps: %d     MMU contexts: %d\n", cpuid,
printk292arch/sparc/kernel/probe.cprintk("cpu%d probe_mmu: sparc_cpu_model botch\n", cpuid);
printk312arch/sparc/kernel/probe.cprintk("probe_clock: No SUN4 Clock/Timer support yet...\n");
printk326arch/sparc/kernel/probe.cprintk("probe_clock: FAILED!\n");
printk343arch/sparc/kernel/probe.cprintk("probe_clock: FAILED!\n");
printk359arch/sparc/kernel/probe.cprintk("Aieee, could not find timer chip type\n");
printk388arch/sparc/kernel/probe.cprintk ("Cannot find /obio/counter node\n");
printk438arch/sparc/kernel/probe.cprintk("Cannot find auxio node, cannot continue...\n");
printk447arch/sparc/kernel/probe.cprintk("Mapped AUXIO at paddr %08lx vaddr %08lx\n",
printk487arch/sparc/kernel/probe.cprintk("No CPU nodes found, cannot continue.\n");
printk491arch/sparc/kernel/probe.cprintk("Found %d CPU prom device tree node(s).\n", cpu_ctr);
printk498arch/sparc/kernel/probe.cprintk("cpu%d: %s \n", i, node_str);
printk56arch/sparc/kernel/process.cprintk("l0:%08lx l1:%08lx l2:%08lx l3:%08lx l4:%08lx l5:%08lx l6:%08lx l7:%08lx\n",
printk59arch/sparc/kernel/process.cprintk("i0:%08lx i1:%08lx i2:%08lx i3:%08lx i4:%08lx i5:%08lx i6:%08lx i7:%08lx\n",
printk66arch/sparc/kernel/process.cprintk("PSR: %08lx PC: %08lx NPC: %08lx Y: %08lx\n", regs->psr,
printk68arch/sparc/kernel/process.cprintk("%%g0: %08lx %%g1: %08lx %%g2: %08lx %%g3: %08lx\n",
printk71arch/sparc/kernel/process.cprintk("%%g4: %08lx %%g5: %08lx %%g6: %08lx %%g7: %08lx\n",
printk74arch/sparc/kernel/process.cprintk("%%o0: %08lx %%o1: %08lx %%o2: %08lx %%o3: %08lx\n",
printk77arch/sparc/kernel/process.cprintk("%%o4: %08lx %%o5: %08lx %%sp: %08lx %%ret_pc: %08lx\n",
printk113arch/sparc/kernel/setup.cprintk("boot_flags_init: Unknown boot arg (-%c)\n",
printk122arch/sparc/kernel/setup.cprintk("KGDB: Using serial line /dev/tty%c for "
printk130arch/sparc/kernel/setup.cprintk("KGDB: whoops bogon tty line "
printk179arch/sparc/kernel/setup.cprintk("ARCH: ");
printk183arch/sparc/kernel/setup.cprintk("SUN4C\n");
printk187arch/sparc/kernel/setup.cprintk("SUN4M\n");
printk190arch/sparc/kernel/setup.cprintk("SUN4D\n");
printk193arch/sparc/kernel/setup.cprintk("SUN4E\n");
printk196arch/sparc/kernel/setup.cprintk("SUN4U\n");
printk199arch/sparc/kernel/setup.cprintk("UNKNOWN!\n");
printk206arch/sparc/kernel/setup.cprintk("Booted under KADB. Syncing trap table.\n");
printk218arch/sparc/kernel/setup.cprintk("Physical Memory: %d bytes (in hex %08lx)\n", (int) total,
printk223arch/sparc/kernel/setup.cprintk("Bank %d:  base 0x%x  bytes %d\n", i,
printk189arch/sparc/kernel/signal.cprintk("%s [%d]: User has trashed signal stack\n",
printk191arch/sparc/kernel/signal.cprintk("Sigstack ptr %p handler at pc<%08lx> for sig<%d>\n",
printk72arch/sparc/kernel/sys_sunos.cprintk("%s: unimplemented SunOS MAP_NORESERVE mmap() flag\n",
printk105arch/sparc/kernel/sys_sunos.cprintk("%s: Call to sunos_mctl(addr<%08lx>, len<%08lx>, function<%d>, arg<%p>) "
printk115arch/sparc/kernel/sys_sunos.cprintk("%s: Call to sunos_msync(addr<%08lx>, len<%08lx>, flags<%08lx>) "
printk204arch/sparc/kernel/sys_sunos.cprintk("%s: Call to sunos_sstk(increment<%d>) is unsupported\n",
printk226arch/sparc/kernel/sys_sunos.cprintk("%s: Advises us to use %s paging strategy\n",
printk253arch/sparc/kernel/sys_sunos.cprintk("%s: Advises us to use %s paging strategy for addr<%08lx> len<%08lx>\n",
printk457arch/sparc/kernel/sys_sunos.cprintk("Process makes ni_syscall number %d, register dump:\n",
printk756arch/sparc/kernel/sys_sunos.cprintk("Warning: UFS filesystem mounts unsupported.\n");
printk764arch/sparc/kernel/sys_sunos.cprintk("sys_mount(type<%s>, device<%s>) returns %d\n",
printk799arch/sparc/kernel/sys_sunos.cprintk ("sys_audit\n");
printk26arch/sparc/kernel/traps.cprintk("%s[%d]: sys[%d](%d, %d, %d, %d) ",
printk37arch/sparc/kernel/traps.cprintk("retvals[%d,%d] at pc<%08lx>\n",
printk46arch/sparc/kernel/traps.cprintk("CWP return from trap assertion fails:\n");
printk47arch/sparc/kernel/traps.cprintk("Current psr %08lx, new psr %08lx\n", psr, regs->psr);
printk56arch/sparc/kernel/traps.cprintk("Unimplemented Sparc TRAP, type = %02lx psr = %08lx pc = %08lx\n",
printk67arch/sparc/kernel/traps.cprintk("Illegal instruction at PC %08lx NPC %08lx PSR %08lx\n",
printk81arch/sparc/kernel/traps.cprintk("Privileged instruction at PC %08lx NPC %08lx PSR %08lx\n",
printk95arch/sparc/kernel/traps.cprintk("Unaligned memory access at PC %08lx NPC %08lx PSR %08lx\n",
printk233arch/sparc/kernel/traps.cprintk("Tag overflow trap at PC %08lx NPC %08lx PSR %08lx\n",
printk247arch/sparc/kernel/traps.cprintk("Watchpoint detected at PC %08lx NPC %08lx PSR %08lx\n",
printk259arch/sparc/kernel/traps.cprintk("Register Access Exception at PC %08lx NPC %08lx PSR %08lx\n",
printk269arch/sparc/kernel/traps.cprintk("Co-Processor disabled trap at PC %08lx NPC %08lx PSR %08lx\n",
printk279arch/sparc/kernel/traps.cprintk("Unimplemented FLUSH Exception at PC %08lx NPC %08lx PSR %08lx\n",
printk289arch/sparc/kernel/traps.cprintk("Co-Processor Exception at PC %08lx NPC %08lx PSR %08lx\n",
printk299arch/sparc/kernel/traps.cprintk("Divide By Zero Exception at PC %08lx NPC %08lx PSR %08lx\n",
printk331arch/sparc/kernel/traps.cprintk("trap_init: Uniprocessor detected.\n");
printk80arch/sparc/mm/fault.cprintk ("The machine has more banks that this kernel can support\n"
printk117arch/sparc/mm/fault.cprintk("FAULT: NMI received\n");
printk118arch/sparc/mm/fault.cprintk("SREGS: Synchronous Error %08lx\n", serr);
printk119arch/sparc/mm/fault.cprintk("       Synchronous Vaddr %08lx\n", svaddr);
printk120arch/sparc/mm/fault.cprintk("      Asynchronous Error %08lx\n", aerr);
printk121arch/sparc/mm/fault.cprintk("      Asynchronous Vaddr %08lx\n", avaddr);
printk122arch/sparc/mm/fault.cprintk("REGISTER DUMP:\n");
printk195arch/sparc/mm/fault.cprintk("This Sparc honours the WP bit even when in supervisor mode. "
printk203arch/sparc/mm/fault.cprintk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
printk205arch/sparc/mm/fault.cprintk(KERN_ALERT "Unable to handle kernel paging request");
printk206arch/sparc/mm/fault.cprintk(" at virtual address %08lx\n",address);
printk207arch/sparc/mm/fault.cprintk("At PC %08lx nPC %08lx\n", (unsigned long) regs->pc,
printk209arch/sparc/mm/fault.cprintk(KERN_ALERT "current->tss.pgd_ptr = %08lx\n",
printk235arch/sparc/mm/fault.cprintk("%s[%d]wfault<%d>: WINDOW DUMP --> ", current->comm,
printk239arch/sparc/mm/fault.cprintk("w[%d]sp<%08lx>, ",
printk242arch/sparc/mm/fault.cprintk("w[0]sp<%08lx>", regs->u_regs[UREG_FP]);
printk244arch/sparc/mm/fault.cprintk("\n");
printk283arch/sparc/mm/fault.cprintk(", w[1]sp<%08lx>\n", sp);
printk296arch/sparc/mm/fault.cprintk("%s[%d]: User has trashed stack pointer pc<%08lx>sp<%08lx>\n",
printk66arch/sparc/mm/init.cprintk("\nMem-info:\n");
printk68arch/sparc/mm/init.cprintk("Free swap:       %6dkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
printk79arch/sparc/mm/init.cprintk("%d pages of RAM\n",total);
printk80arch/sparc/mm/init.cprintk("%d free pages\n",free);
printk81arch/sparc/mm/init.cprintk("%d reserved pages\n",reserved);
printk82arch/sparc/mm/init.cprintk("%d pages shared\n",shared);
printk112arch/sparc/mm/init.cprintk("paging_init: Cannot init paging on this Sparc\n");
printk113arch/sparc/mm/init.cprintk("paging_init: sparc_cpu_model = %d\n", sparc_cpu_model);
printk114arch/sparc/mm/init.cprintk("paging_init: Halting...\n");
printk187arch/sparc/mm/init.cprintk("Memory: %luk available (%dk kernel code, %dk data)\n",
printk203arch/sparc/mm/init.cprintk("mem_init: Could not test WP bit on this machine.\n");
printk204arch/sparc/mm/init.cprintk("mem_init: sparc_cpu_model = %d\n", sparc_cpu_model);
printk205arch/sparc/mm/init.cprintk("mem_init: Halting...\n");
printk133arch/sparc/mm/loadmmu.cprintk("load_mmu:MMU support not available for this architecture\n");
printk134arch/sparc/mm/loadmmu.cprintk("load_mmu:sparc_cpu_model = %d\n", (int) sparc_cpu_model);
printk135arch/sparc/mm/loadmmu.cprintk("load_mmu:Halting...\n");
printk45arch/sparc/mm/mbus.cprintk("MMU REGISTER\n");
printk46arch/sparc/mm/mbus.cprintk("IMPL<%01x> VERS<%01x> SYSCNTRL<%04x> PSO<%d> RESV<%02x> NOFAULT<%d> ENABLE<%d>\n",
printk51arch/sparc/mm/mbus.cprintk("MBUS: ");
printk59arch/sparc/mm/mbus.cprintk("Enabling HyperSparc features...\n");
printk93arch/sparc/mm/mbus.cprintk("ROSS Cypress Module %s\n",
printk98arch/sparc/mm/mbus.cprintk("Enabling Cypress features...\n");
printk111arch/sparc/mm/mbus.cprintk("Fujitsu MB86904 or higher Swift module\n");  /* MB86905 etc. */
printk120arch/sparc/mm/mbus.cprintk("Detected Swift with Lots 'o' Bugs\n");
printk126arch/sparc/mm/mbus.cprintk("Detected Swift with kernel pte C bit bug\n");
printk130arch/sparc/mm/mbus.cprintk("Detected Swift with no bugs...\n");
printk134arch/sparc/mm/mbus.cprintk("Enabling Swift features...\n");
printk162arch/sparc/mm/mbus.cprintk("VIKING Module\n");
printk163arch/sparc/mm/mbus.cprintk("Enabling Viking features...\n");
printk171arch/sparc/mm/mbus.cprintk("Tsunami module\n");
printk176arch/sparc/mm/mbus.cprintk("Unknown SRMMU module type!\n");
printk177arch/sparc/mm/mbus.cprintk("MMU_CREG: impl=%x vers=%x\n", mod_typ, mod_rev);
printk178arch/sparc/mm/mbus.cprintk("PSR: impl=%x vers=%x\n", ((get_psr()>>28)&0xf),
printk184arch/sparc/mm/mbus.cprintk("Boot processor ID %d Module ID %d (%s MBUS)\n",
printk242arch/sparc/mm/srmmu.cprintk("Bad pmd in pte_alloc_kernel: %08lx\n", pmd_val(*pmd));
printk277arch/sparc/mm/srmmu.cprintk("Bad pgd in pmd_alloc_kernel: %08lx\n", pgd_val(*pgd));
printk309arch/sparc/mm/srmmu.cprintk("Bad pmd in pte_alloc_kernel: %08lx\n", pmd_val(*pmd));
printk345arch/sparc/mm/srmmu.cprintk("Bad pgd in pmd_alloc_kernel: %08lx\n", pgd_val(*pgd));
printk392arch/sparc/mm/srmmu.cprintk("switching to context %d\n", tsk->tss.context);
printk479arch/sparc/mm/srmmu.cif(trace) printk(":0x%x >> ", virt);
printk481arch/sparc/mm/srmmu.cif(trace) printk(" 0x%x :", root);
printk484arch/sparc/mm/srmmu.cif(trace) printk("\n");
printk490arch/sparc/mm/srmmu.cif(trace) printk("\n");
printk491arch/sparc/mm/srmmu.cprintk("AIEEE context table level pte prom mapping!\n");
printk496arch/sparc/mm/srmmu.cif(trace) printk(" 0x%x .", wh);
printk502arch/sparc/mm/srmmu.cif(trace) printk("\n");
printk507arch/sparc/mm/srmmu.cif(trace) printk("\n");
printk511arch/sparc/mm/srmmu.cif(trace) printk(" 0x%x .", wh);
printk516arch/sparc/mm/srmmu.cif(trace) printk("\n");
printk522arch/sparc/mm/srmmu.cif(trace) printk("\n");
printk526arch/sparc/mm/srmmu.cif(trace) printk(" 0x%x .", wh);
printk531arch/sparc/mm/srmmu.cif(trace) printk("\n");
printk534arch/sparc/mm/srmmu.cif(trace) printk(" 0x%x\n", wh);
printk554arch/sparc/mm/srmmu.cprintk("panic: srmmu_init_alloc botch\n");
printk808arch/sparc/mm/srmmu.cprintk("WHOOPS, update_mmu_cache called on a SRMMU!\n");
printk398arch/sparc/mm/sun4c.cprintk("Bad pmd in pte_alloc_kernel: %08lx\n", pmd_val(*pmd));
printk440arch/sparc/mm/sun4c.cprintk("Bad pmd in pte_alloc: %08lx\n", pmd_val(*pmd));
printk612arch/sparc/mm/sun4c.cprintk("SUN4C: Fault in vm hole at %08lx\n", faddr);
printk788arch/sparc/mm/sun4c.cprintk("SS2 cache bug detected, uncaching trap table page\n");
printk930arch/sparc/mm/sun4c.cprintk("SUN4C: Hard locked %d boot-up psegs\n", phys_seg);
printk1054arch/sparc/mm/sun4c.cprintk("Loading sun4c MMU routines\n");
printk74arch/sparc/prom/init.cprintk("PROMLIB: Sun Boot Prom Version %d Revision %d\n",
printk263drivers/block/cmd640.cprintk("ide: can't initialize cmd640 -- wrong value in 0x5b\n");
printk274drivers/block/cmd640.cprintk ("ide: wrong CMD640 version -- 0\n");
printk324drivers/block/cmd640.cprintk("ide: buggy CMD640%c interface at ", 
printk328drivers/block/cmd640.cprintk("local bus, port 0x%x", cmd640_key);
printk331drivers/block/cmd640.cprintk("pci, (0x%x)", cmd640_key);
printk334drivers/block/cmd640.cprintk("pci,(access method 2) (0x%x)", cmd640_key);
printk345drivers/block/cmd640.cprintk("\n ... serialized, %s read-ahead, secondary interface %s\n",
printk533drivers/block/cmd640.cprintk ("Mode and Timing set to PIO%d (0x%x 0x%x)\n", max_pio, r1, r2);
printk231drivers/block/floppy.c#define DPRINT(x) printk(DEVICE_NAME "%d: " x,current_drive)
printk233drivers/block/floppy.c#define DPRINT1(x,x1) printk(DEVICE_NAME "%d: " x,current_drive,(x1))
printk235drivers/block/floppy.c#define DPRINT2(x,x1,x2) printk(DEVICE_NAME "%d: " x,current_drive,(x1),(x2))
printk237drivers/block/floppy.c#define DPRINT3(x,x1,x2,x3) printk(DEVICE_NAME "%d: " x,current_drive,(x1),(x2),(x3))
printk533drivers/block/floppy.cprintk("%s dtime=%lu\n", message, jiffies-debugtimer);
printk588drivers/block/floppy.cprintk(message, marg);
printk589drivers/block/floppy.cprintk("\n");
printk770drivers/block/floppy.cprintk("bad fdc value\n");
printk785drivers/block/floppy.cprintk("trying to lock fdc while usage count=0\n");
printk979drivers/block/floppy.cprintk("zero dma transfer size:");
printk981drivers/block/floppy.cprintk("%x,", raw_cmd->cmd[i]);
printk982drivers/block/floppy.cprintk("\n");
printk988drivers/block/floppy.cprintk("non aligned address: %p\n", raw_cmd->kernel_data);
printk994drivers/block/floppy.cprintk("DMA crossing 64-K boundary %p-%p\n",
printk1241drivers/block/floppy.cprintk(": track %d, head %d, sector %d, size %d",
printk1281drivers/block/floppy.cprintk("Recalibrate failed!");
printk1283drivers/block/floppy.cprintk("data CRC error");
printk1286drivers/block/floppy.cprintk("CRC error");
printk1290drivers/block/floppy.cprintk("sector not found");
printk1293drivers/block/floppy.cprintk("probe failed...");
printk1295drivers/block/floppy.cprintk("wrong cylinder");
printk1297drivers/block/floppy.cprintk("bad cylinder");
printk1299drivers/block/floppy.cprintk("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x", ST0, ST1, ST2);
printk1302drivers/block/floppy.cprintk("\n");
printk1568drivers/block/floppy.cprintk("%d %x\n", i, reply_buffer[i]);
printk1576drivers/block/floppy.cprintk("sensei\n");
printk1578drivers/block/floppy.cprintk("%d %x\n", i, reply_buffer[i]);
printk1599drivers/block/floppy.cprintk("DOR0=%x\n", fdc_state[0].dor);
printk1600drivers/block/floppy.cprintk("floppy interrupt on bizarre fdc %d\n",fdc);
printk1601drivers/block/floppy.cprintk("handler=%p\n", handler);
printk1643drivers/block/floppy.cprintk("reset set in interrupt, calling %p\n", cont->error);
printk1675drivers/block/floppy.cprintk("\n");
printk1676drivers/block/floppy.cprintk("floppy driver state\n");
printk1677drivers/block/floppy.cprintk("-------------------\n");
printk1678drivers/block/floppy.cprintk("now=%ld last interrupt=%d last called handler=%p\n",
printk1683drivers/block/floppy.cprintk("timeout_message=%s\n", timeout_message);
printk1684drivers/block/floppy.cprintk("last output bytes:\n");
printk1686drivers/block/floppy.cprintk("%2x %2x %ld\n",
printk1690drivers/block/floppy.cprintk("last result at %d\n", resultjiffies);
printk1691drivers/block/floppy.cprintk("last redo_fd_request at %d\n", lastredo);
printk1693drivers/block/floppy.cprintk("%2x ", reply_buffer[i]);
printk1695drivers/block/floppy.cprintk("\n");
printk1698drivers/block/floppy.cprintk("status=%x\n", fd_inb(FD_STATUS));
printk1699drivers/block/floppy.cprintk("fdc_busy=%d\n", fdc_busy);
printk1701drivers/block/floppy.cprintk("DEVICE_INTR=%p\n", DEVICE_INTR);
printk1703drivers/block/floppy.cprintk("floppy_tq.routine=%p\n", floppy_tq.routine);
printk1705drivers/block/floppy.cprintk("fd_timer.function=%p\n", fd_timer.function);
printk1707drivers/block/floppy.cprintk("timer_table=%p\n",fd_timeout.function);
printk1708drivers/block/floppy.cprintk("expires=%ld\n",fd_timeout.expires-jiffies);
printk1709drivers/block/floppy.cprintk("now=%ld\n",jiffies);
printk1711drivers/block/floppy.cprintk("cont=%p\n", cont);
printk1712drivers/block/floppy.cprintk("CURRENT=%p\n", CURRENT);
printk1713drivers/block/floppy.cprintk("command_status=%d\n", command_status);
printk1714drivers/block/floppy.cprintk("\n");
printk1737drivers/block/floppy.cprintk("no cont in shutdown!\n");
printk2150drivers/block/floppy.cprintk("rs=%d s=%d\n", R_SECTOR, SECTOR);
printk2151drivers/block/floppy.cprintk("rh=%d h=%d\n", R_HEAD, HEAD);
printk2152drivers/block/floppy.cprintk("rt=%d t=%d\n", R_TRACK, TRACK);
printk2153drivers/block/floppy.cprintk("spt=%d st=%d ss=%d\n", SECT_PER_TRACK,
printk2261drivers/block/floppy.cprintk("current_count_sectors=%ld\n", current_count_sectors);
printk2262drivers/block/floppy.cprintk("remaining=%d\n", remaining >> 9);
printk2263drivers/block/floppy.cprintk("CURRENT->nr_sectors=%ld\n",CURRENT->nr_sectors);
printk2264drivers/block/floppy.cprintk("CURRENT->current_nr_sectors=%ld\n",
printk2266drivers/block/floppy.cprintk("max_sector=%d\n", max_sector);
printk2267drivers/block/floppy.cprintk("ssize=%d\n", ssize);
printk2287drivers/block/floppy.cprintk("sector_t=%d buffer_min=%d\n",
printk2289drivers/block/floppy.cprintk("current_count_sectors=%ld\n",
printk2292drivers/block/floppy.cprintk("read\n");
printk2294drivers/block/floppy.cprintk("write\n");
printk2537drivers/block/floppy.cprintk("addr=%d, length=%ld\n",
printk2541drivers/block/floppy.cprintk("st=%d ast=%d mse=%d msi=%d\n",
printk2543drivers/block/floppy.cprintk("ssize=%x SIZECODE=%d\n", ssize, SIZECODE);
printk2544drivers/block/floppy.cprintk("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n",
printk2546drivers/block/floppy.cprintk("buffer drive=%d\n", buffer_drive);
printk2547drivers/block/floppy.cprintk("buffer track=%d\n", buffer_track);
printk2548drivers/block/floppy.cprintk("buffer_min=%d\n", buffer_min);
printk2549drivers/block/floppy.cprintk("buffer_max=%d\n", buffer_max);
printk2560drivers/block/floppy.cprintk("sector_t=%d buffer_min=%d current_count=%ld\n",
printk2563drivers/block/floppy.cprintk("current_count_sectors=%ld\n",
printk2566drivers/block/floppy.cprintk("read\n");
printk2568drivers/block/floppy.cprintk("write\n");
printk2577drivers/block/floppy.cprintk("bytes=%ld\n", raw_cmd->length >> 9);
printk2578drivers/block/floppy.cprintk("sectors=%ld\n", current_count_sectors);
printk2719drivers/block/floppy.cprintk("weird, reset interrupt called\n");
printk3142drivers/block/floppy.cprintk("ioctl not yet supported\n");
printk3345drivers/block/floppy.cprintk("Floppy drive(s): ");
printk3347drivers/block/floppy.cprintk(", ");
printk3351drivers/block/floppy.cprintk("fd%d is %s", drive,
printk3354drivers/block/floppy.cprintk("fd%d is unknown type %d",drive,
printk3359drivers/block/floppy.cprintk("\n");
printk3632drivers/block/floppy.cprintk("FDC %d is a 8272A\n",fdc);
printk3636drivers/block/floppy.cprintk("FDC init: DUMPREGS: unexpected return of %d bytes.\n", r);
printk3642drivers/block/floppy.cprintk("FDC %d is a 82072\n",fdc);
printk3646drivers/block/floppy.cprintk("FDC init: VERSION: unexpected return of %d bytes.\n", r);
printk3652drivers/block/floppy.cprintk("FDC %d is a pre-1991 82077\n", fdc);
printk3656drivers/block/floppy.cprintk("FDC init: UNLOCK: unexpected return of %d bytes.\n", r);
printk3659drivers/block/floppy.cprintk("FDC %d is a post-1991 82077\n",fdc);
printk3785drivers/block/floppy.cprintk(" %s",config_params[i].name);
printk3786drivers/block/floppy.cprintk("\n");
printk3802drivers/block/floppy.cprintk("Unable to get major %d for floppy\n",MAJOR_NR);
printk3966drivers/block/floppy.cprintk("motor off timer %d still active\n", drive);
printk3969drivers/block/floppy.cprintk("floppy timer still active:%s\n", timeout_message);
printk3971drivers/block/floppy.cprintk("auxiliary floppy timer still active\n");
printk3973drivers/block/floppy.cprintk("task queue still active\n");
printk4030drivers/block/floppy.cprintk("inserting floppy driver for %s\n", kernel_version);
printk71drivers/block/genhd.cprintk(" %s", name);
printk74drivers/block/genhd.cprintk(" %s%c", hd->major_name, 'a' + unit);
printk76drivers/block/genhd.cprintk("%d", part);
printk78drivers/block/genhd.cprintk(":");
printk206drivers/block/genhd.cprintk(" unable to read partition table\n");
printk285drivers/block/genhd.cprintk(" <");
printk295drivers/block/genhd.cprintk(" >");
printk316drivers/block/genhd.cprintk("\n");
printk365drivers/block/genhd.cprintk("unable to read partition table\n");
printk371drivers/block/genhd.cprintk("magic: %08x\n", label->d_magic);
printk376drivers/block/genhd.cprintk("magic2: %08x\n", label->d_magic2);
printk389drivers/block/genhd.cprintk("\n");
printk428drivers/block/genhd.cprintk("Dev %d: unable to read partition table\n", dev);
printk434drivers/block/genhd.cprintk("Dev %d Sun disklabel: bad magic %08x\n", dev, label->magic);
printk443drivers/block/genhd.cprintk("Dev %d Sun disklabel: Csum bad, label corrupted\n", dev);
printk459drivers/block/genhd.cprintk("\n");
printk472drivers/block/genhd.cprintk("Partition check:\n");
printk485drivers/block/genhd.cprintk(" ");
printk499drivers/block/genhd.cprintk(" unknown partition table\n");
printk137drivers/block/hd.cprintk("hd%c: %s: status=0x%02x { ", devc, msg, stat & 0xff);
printk138drivers/block/hd.cif (stat & BUSY_STAT)  printk("Busy ");
printk139drivers/block/hd.cif (stat & READY_STAT)  printk("DriveReady ");
printk140drivers/block/hd.cif (stat & WRERR_STAT)  printk("WriteFault ");
printk141drivers/block/hd.cif (stat & SEEK_STAT)  printk("SeekComplete ");
printk142drivers/block/hd.cif (stat & DRQ_STAT)  printk("DataRequest ");
printk143drivers/block/hd.cif (stat & ECC_STAT)  printk("CorrectedError ");
printk144drivers/block/hd.cif (stat & INDEX_STAT)  printk("Index ");
printk145drivers/block/hd.cif (stat & ERR_STAT)  printk("Error ");
printk146drivers/block/hd.cprintk("}\n");
printk151drivers/block/hd.cprintk("hd%c: %s: error=0x%02x { ", devc, msg, hd_error & 0xff);
printk152drivers/block/hd.cif (hd_error & BBD_ERR)    printk("BadSector ");
printk153drivers/block/hd.cif (hd_error & ECC_ERR)    printk("UncorrectableError ");
printk154drivers/block/hd.cif (hd_error & ID_ERR)    printk("SectorIdNotFound ");
printk155drivers/block/hd.cif (hd_error & ABRT_ERR)  printk("DriveStatusError ");
printk156drivers/block/hd.cif (hd_error & TRK0_ERR)  printk("TrackZeroNotFound ");
printk157drivers/block/hd.cif (hd_error & MARK_ERR)  printk("AddrMarkNotFound ");
printk158drivers/block/hd.cprintk("}");
printk160drivers/block/hd.cprintk(", CHS=%d/%d/%d", (inb(HD_HCYL)<<8) + inb(HD_LCYL),
printk163drivers/block/hd.cprintk(", sector=%ld", CURRENT->sector);
printk165drivers/block/hd.cprintk("\n");
printk290drivers/block/hd.cprintk ("  hd%c: non-IDE device, %dMB, CHS=%d/%d/%d\n", dev+'a',
printk315drivers/block/hd.cprintk ("  hd%c: %.40s, %dMB w/%dKB Cache, CHS=%d/%d/%d, MaxMult=%d\n",
printk345drivers/block/hd.cprintk ("  hd%c: enabled %d-sector multiple mode\n",
printk348drivers/block/hd.cprintk ("  hd%c: disabled multiple mode\n", dev+'a');
printk380drivers/block/hd.cprintk("hd: controller still busy\n");
printk382drivers/block/hd.cprintk("hd: controller reset failed: %02x\n",hd_error);
printk403drivers/block/hd.cprintk("hd%c: reset irq-unmasking to %d\n",i+'a',
printk409drivers/block/hd.cprintk("hd%c: reset multiple mode to %d\n",i+'a',
printk506drivers/block/hd.cprintk("hd%c: read: sectors(%ld-%ld), remaining=%ld, buffer=0x%08lx\n",
printk644drivers/block/hd.cprintk("hd%c: timeout\n", dev+'a');
printk647drivers/block/hd.cprintk("hd%c: too many errors\n", dev+'a');
printk675drivers/block/hd.cprintk ("hd%c: cannot handle device with more than 16 heads - giving up\n", dev+'a');
printk716drivers/block/hd.cprintk("hd: bad minor number: device=%s\n",
printk719drivers/block/hd.cprintk("hd%c: bad access: block=%d, count=%d\n",
printk737drivers/block/hd.cprintk("hd%c: %sing: CHS=%d/%d/%d, sectors=%d, buffer=0x%08lx\n",
printk1024drivers/block/hd.cprintk("hd: unable to get IRQ%d for the harddisk driver\n",HD_IRQ);
printk1053drivers/block/hd.cprintk("hd: unable to get major %d for harddisk\n",MAJOR_NR);
printk415drivers/block/ide-cd.cprintk ("ATAPI device %s:\n", drive->name);
printk417drivers/block/ide-cd.cprintk ("  Error code: 0x%02x\n", reqbuf->error_code);
printk425drivers/block/ide-cd.cprintk ("  Sense key: 0x%02x - %s\n", reqbuf->sense_key, s);
printk462drivers/block/ide-cd.cprintk ("  Additional sense data: 0x%02x, 0x%02x  - %s\n",
printk466drivers/block/ide-cd.cprintk ("  Failed packet command: ");
printk468drivers/block/ide-cd.cprintk ("%02x ", failed_command->c[i]);
printk469drivers/block/ide-cd.cprintk ("\n");
printk475drivers/block/ide-cd.cprintk ("  Error in %s byte %d",
printk484drivers/block/ide-cd.cprintk (" bit %d", reqbuf->sense_key_specific[0] & 0x07);
printk487drivers/block/ide-cd.cprintk ("\n");
printk501drivers/block/ide-cd.cprintk ("%s: code: 0x%02x  key: 0x%02x  asc: 0x%02x  ascq: 0x%02x\n",
printk620drivers/block/ide-cd.cprintk ("%s : missing request in cdrom_decode_status\n", drive->name);
printk656drivers/block/ide-cd.cprintk ("%s : tray open or drive not ready\n", drive->name);
printk663drivers/block/ide-cd.cprintk ("%s: media changed\n", drive->name);
printk703drivers/block/ide-cd.cprintk ("%s : tray open\n", drive->name);
printk898drivers/block/ide-cd.cprintk ("%s: cdrom_read_intr: "
printk915drivers/block/ide-cd.cprintk ("%s: cdrom_read_intr: bad interrupt reason %d\n",
printk948drivers/block/ide-cd.cprintk ("%s: cdrom_read_intr: data underrun (%ld blocks)\n",
printk965drivers/block/ide-cd.cprintk ("%s: cdrom_read_intr: Bad transfer size %d\n",
printk967drivers/block/ide-cd.cprintk ("  This drive is not supported by this version of the driver\n");
printk1085drivers/block/ide-cd.cprintk ("%s: cdrom_read_from_buffer: buffer botch (%ld)\n",
printk1127drivers/block/ide-cd.cprintk ("%s: cdrom_start_read_continuation: buffer botch (%ld)\n",
printk1235drivers/block/ide-cd.cprintk ("%s: cdrom_pc_intr: data underrun %d\n",
printk1254drivers/block/ide-cd.cprintk ("%s: cdrom_pc_intr: Drive wants to transfer data the wrong way!\n",
printk1283drivers/block/ide-cd.cprintk ("%s: cdrom_pc_intr: Drive wants to transfer data the wrong way!\n",
printk1308drivers/block/ide-cd.cprintk ("%s: cdrom_pc_intr: The drive appears confused (ireason = 0x%2x)\n",
printk1445drivers/block/ide-cd.cprintk ("ide-cd: bad cmd %d\n", rq -> cmd);
printk1547drivers/block/ide-cd.cprintk ("%s: door locking not supported\n", drive->name);
printk1679drivers/block/ide-cd.cprintk ("%s: No cdrom TOC buffer!\n", drive->name);
printk1932drivers/block/ide-cd.cprintk ("%s: Drive does not support PLAYAUDIO12; "
printk2012drivers/block/ide-cd.cprintk ("%s: Drive does not recognize READ_CD; trying opcode 0xd4\n",
printk912drivers/block/ide-tape.cprintk ("Dumping ATAPI Identify Device tape parameters\n");
printk914drivers/block/ide-tape.cprintk ("Protocol Type: ");
printk916drivers/block/ide-tape.ccase 0: case 1: printk ("ATA\n");break;
printk917drivers/block/ide-tape.ccase 2:  printk ("ATAPI\n");break;
printk918drivers/block/ide-tape.ccase 3: printk ("Reserved (Unknown to ide-tape)\n");break;
printk921drivers/block/ide-tape.cprintk ("Device Type: %x - ",gcw.device_type);  
printk923drivers/block/ide-tape.ccase 0: printk ("Direct-access Device\n");break;
printk924drivers/block/ide-tape.ccase 1: printk ("Streaming Tape Device\n");break;
printk925drivers/block/ide-tape.ccase 2: case 3: case 4: printk ("Reserved\n");break;
printk926drivers/block/ide-tape.ccase 5: printk ("CD-ROM Device\n");break;
printk927drivers/block/ide-tape.ccase 6: printk ("Reserved\n");
printk928drivers/block/ide-tape.ccase 7: printk ("Optical memory Device\n");break;
printk929drivers/block/ide-tape.ccase 0x1f: printk ("Unknown or no Device type\n");break;
printk930drivers/block/ide-tape.cdefault: printk ("Reserved\n");
printk932drivers/block/ide-tape.cprintk ("Removable: %s",gcw.removable ? "Yes\n":"No\n");  
printk934drivers/block/ide-tape.cprintk ("Command Packet DRQ Type: ");
printk936drivers/block/ide-tape.ccase 0: printk ("Microprocessor DRQ\n");break;
printk937drivers/block/ide-tape.ccase 1: printk ("Interrupt DRQ\n");break;
printk938drivers/block/ide-tape.ccase 2: printk ("Accelerated DRQ\n");break;
printk939drivers/block/ide-tape.ccase 3: printk ("Reserved\n");break;
printk942drivers/block/ide-tape.cprintk ("Command Packet Size: ");
printk944drivers/block/ide-tape.ccase 0: printk ("12 bytes\n");break;
printk945drivers/block/ide-tape.ccase 1: printk ("16 bytes\n");break;
printk946drivers/block/ide-tape.cdefault: printk ("Reserved\n");break;
printk948drivers/block/ide-tape.cprintk ("Model: %s\n",id->model);
printk949drivers/block/ide-tape.cprintk ("Firmware Revision: %s\n",id->fw_rev);
printk950drivers/block/ide-tape.cprintk ("Serial Number: %s\n",id->serial_no);
printk951drivers/block/ide-tape.cprintk ("Write buffer size: %d bytes\n",id->buf_size*512);
printk952drivers/block/ide-tape.cprintk ("DMA: %s",id->capability & 0x01 ? "Yes\n":"No\n");
printk953drivers/block/ide-tape.cprintk ("LBA: %s",id->capability & 0x02 ? "Yes\n":"No\n");
printk954drivers/block/ide-tape.cprintk ("IORDY can be disabled: %s",id->capability & 0x04 ? "Yes\n":"No\n");
printk955drivers/block/ide-tape.cprintk ("IORDY supported: %s",id->capability & 0x08 ? "Yes\n":"Unknown\n");
printk956drivers/block/ide-tape.cprintk ("PIO Cycle Timing Category: %d\n",id->tPIO);
printk957drivers/block/ide-tape.cprintk ("DMA Cycle Timing Category: %d\n",id->tDMA);
printk958drivers/block/ide-tape.cprintk ("Single Word DMA supported modes: ");
printk961drivers/block/ide-tape.cprintk ("%d ",i);
printk963drivers/block/ide-tape.cprintk ("(active) ");
printk965drivers/block/ide-tape.cprintk ("\n");
printk967drivers/block/ide-tape.cprintk ("Multi Word DMA supported modes: ");
printk970drivers/block/ide-tape.cprintk ("%d ",i);
printk972drivers/block/ide-tape.cprintk ("(active) ");
printk974drivers/block/ide-tape.cprintk ("\n");
printk977drivers/block/ide-tape.cprintk ("Enhanced PIO Modes: %s\n",id->eide_pio_modes & 1 ? "Mode 3":"None");
printk978drivers/block/ide-tape.cprintk ("Minimum Multi-word DMA cycle per word: ");
printk980drivers/block/ide-tape.cprintk ("Not supported\n");
printk982drivers/block/ide-tape.cprintk ("%d ns\n",id->eide_dma_min);
printk984drivers/block/ide-tape.cprintk ("Manafactuer\'s Recommended Multi-word cycle: ");
printk986drivers/block/ide-tape.cprintk ("Not supported\n");
printk988drivers/block/ide-tape.cprintk ("%d ns\n",id->eide_dma_time);
printk990drivers/block/ide-tape.cprintk ("Minimum PIO cycle without IORDY: ");
printk992drivers/block/ide-tape.cprintk ("Not supported\n");
printk994drivers/block/ide-tape.cprintk ("%d ns\n",id->eide_pio);
printk996drivers/block/ide-tape.cprintk ("Minimum PIO cycle with IORDY: ");
printk998drivers/block/ide-tape.cprintk ("Not supported\n");
printk1000drivers/block/ide-tape.cprintk ("%d ns\n",id->eide_pio_iordy);
printk1005drivers/block/ide-tape.cprintk ("According to the device, fields 64-70 are not valid.\n");
printk1012drivers/block/ide-tape.cprintk ("ide-tape: Protocol is not ATAPI\n");support=0;
printk1016drivers/block/ide-tape.cprintk ("ide-tape: Device type is not set to tape\n");support=0;
printk1020drivers/block/ide-tape.cprintk ("ide-tape: The removable flag is not set\n");support=0;
printk1024drivers/block/ide-tape.cprintk ("ide-tape: Sorry, DRQ types other than Accelerated DRQ\n");
printk1025drivers/block/ide-tape.cprintk ("ide-tape: are still not supproted by the driver\n");support=0;
printk1029drivers/block/ide-tape.cprintk ("ide-tape: Packet size is not 12 bytes long\n");
printk1031drivers/block/ide-tape.cprintk ("ide-tape: Sorry, padding to 16 bytes is still not supported\n");
printk1036drivers/block/ide-tape.cprintk ("ide-tape: Sorry, only one ide tape drive is supported by the driver\n");
printk1075drivers/block/ide-tape.cprintk ("Unable to register character device interface !\n");
printk1079drivers/block/ide-tape.cprintk ("ide-tape: %s <-> %s : Character device interface on major = %d\n",
printk1105drivers/block/ide-tape.cprintk ("ide-tape: Reached idetape_setup\n");
printk1130drivers/block/ide-tape.cprintk ("ide-tape: Operating in pipelined (fast and tricky) write mode.\n");
printk1133drivers/block/ide-tape.cprintk ("ide-tape: Operating in non-pipelined (slow and safe) write mode.\n");
printk1135drivers/block/ide-tape.cprintk ("ide-tape: Operating in non-pipelined (slow and safe) read mode.\n");
printk1148drivers/block/ide-tape.cprintk ("ide-tape: FATAL - Can not allocate 2 buffers of %d bytes each\n",allocation_length);
printk1149drivers/block/ide-tape.cprintk ("ide-tape: Aborting character device installation\n");
printk1155drivers/block/ide-tape.cprintk ("ide-tape: Tape speed - %d KBps. Recommended transfer unit - %d bytes.\n",tape->capabilities.speed,tape->data_buffer_size);
printk1193drivers/block/ide-tape.cprintk ("ide-tape: Can't get tape parameters\n");
printk1194drivers/block/ide-tape.cprintk ("ide-tape: Assuming some default parameters\n");
printk1201drivers/block/ide-tape.cprintk ("Dumping the results of the MODE SENSE packet command\n");
printk1202drivers/block/ide-tape.cprintk ("Mode Parameter Header:\n");
printk1203drivers/block/ide-tape.cprintk ("Mode Data Length - %d\n",header->mode_data_length);
printk1204drivers/block/ide-tape.cprintk ("Medium Type - %d\n",header->medium_type);
printk1205drivers/block/ide-tape.cprintk ("Device Specific Parameter - %d\n",header->dsp);
printk1206drivers/block/ide-tape.cprintk ("Block Descriptor Length - %d\n",header->bdl);
printk1208drivers/block/ide-tape.cprintk ("Capabilities and Mechanical Status Page:\n");
printk1209drivers/block/ide-tape.cprintk ("Page code - %d\n",capabilities->page_code);
printk1210drivers/block/ide-tape.cprintk ("Page length - %d\n",capabilities->page_length);
printk1211drivers/block/ide-tape.cprintk ("Read only - %s\n",capabilities->ro ? "Yes":"No");
printk1212drivers/block/ide-tape.cprintk ("Supports reverse space - %s\n",capabilities->sprev ? "Yes":"No");
printk1213drivers/block/ide-tape.cprintk ("Supports erase initiated formatting - %s\n",capabilities->efmt ? "Yes":"No");
printk1214drivers/block/ide-tape.cprintk ("Supports QFA two Partition format - %s\n",capabilities->qfa ? "Yes":"No");
printk1215drivers/block/ide-tape.cprintk ("Supports locking the medium - %s\n",capabilities->lock ? "Yes":"No");
printk1216drivers/block/ide-tape.cprintk ("The volume is currently locked - %s\n",capabilities->locked ? "Yes":"No");
printk1217drivers/block/ide-tape.cprintk ("The device defaults in the prevent state - %s\n",capabilities->prevent ? "Yes":"No");
printk1218drivers/block/ide-tape.cprintk ("Supports ejecting the medium - %s\n",capabilities->eject ? "Yes":"No");
printk1219drivers/block/ide-tape.cprintk ("Supports error correction - %s\n",capabilities->ecc ? "Yes":"No");
printk1220drivers/block/ide-tape.cprintk ("Supports data compression - %s\n",capabilities->cmprs ? "Yes":"No");
printk1221drivers/block/ide-tape.cprintk ("Supports 512 bytes block size - %s\n",capabilities->blk512 ? "Yes":"No");
printk1222drivers/block/ide-tape.cprintk ("Supports 1024 bytes block size - %s\n",capabilities->blk1024 ? "Yes":"No");
printk1223drivers/block/ide-tape.cprintk ("Restricted byte count for PIO transfers - %s\n",capabilities->slowb ? "Yes":"No");
printk1224drivers/block/ide-tape.cprintk ("Maximum supported speed in KBps - %d\n",capabilities->max_speed);
printk1225drivers/block/ide-tape.cprintk ("Continuous transfer limits in blocks - %d\n",capabilities->ctl);
printk1226drivers/block/ide-tape.cprintk ("Current speed in KBps - %d\n",capabilities->speed);  
printk1227drivers/block/ide-tape.cprintk ("Buffer size - %d\n",capabilities->buffer_size*512);
printk1285drivers/block/ide-tape.cprintk ("ide-tape: ide-tape.c bug - Two request sense in serial were issued\n");
printk1295drivers/block/ide-tape.cprintk ("ide-tape: %s: I/O error, ",drive->name);
printk1296drivers/block/ide-tape.cprintk ("pc = %x, key = %x, asc = %x, ascq = %x\n",pc->c[0],tape->sense_key,tape->asc,tape->ascq);
printk1297drivers/block/ide-tape.cprintk ("ide-tape: Maximum retries reached - Giving up\n");
printk1303drivers/block/ide-tape.cprintk ("ide-tape: ide-tape bug - Callback function not set !\n");
printk1311drivers/block/ide-tape.cprintk ("Retry number - %d\n",pc->retries);
printk1343drivers/block/ide-tape.cprintk ("ide-tape: Strange, packet command initiated yet DRQ isn't asserted\n");
printk1349drivers/block/ide-tape.cprintk ("ide-tape: (IO,CoD) != (0,1) while issuing a packet command\n");
printk1382drivers/block/ide-tape.cprintk ("ide-tape: Reached idetape_pc_intr interrupt handler\n");
printk1389drivers/block/ide-tape.cprintk ("Packet command completed\n");
printk1390drivers/block/ide-tape.cprintk ("Total bytes transferred: %lu\n",pc->actually_transferred);
printk1398drivers/block/ide-tape.cprintk ("ide-tape: %s: I/O error, ",drive->name);
printk1414drivers/block/ide-tape.cprintk ("ide-tape: ide-tape bug - Callback function not set !\n");
printk1426drivers/block/ide-tape.cprintk ("ide-tape: CoD != 0 in idetape_pc_intr\n");
printk1430drivers/block/ide-tape.cprintk ("ide-tape: We wanted to %s, ",pc->writing ? "Write":"Read");
printk1431drivers/block/ide-tape.cprintk ("but the tape wants us to %s !\n",ireason.b.io ? "Read":"Write");
printk1438drivers/block/ide-tape.cprintk ("ide-tape: The tape wants to send us more data than requested - ");
printk1440drivers/block/ide-tape.cprintk ("Discarding data\n");
printk1446drivers/block/ide-tape.cprintk ("Allowing transfer\n");
printk1451drivers/block/ide-tape.cprintk ("ide-tape: ide-tape.c bug - Buffer not set in idetape_pc_intr. Discarding data.\n");
printk1454drivers/block/ide-tape.cprintk ("ide-tape: Discarding data\n");
printk1468drivers/block/ide-tape.cprintk ("ide-tape: %s %d bytes\n",pc->writing ? "Wrote":"Received",bcount.all);
printk1496drivers/block/ide-tape.cprintk ("Reached idetape_postpone_request\n");
printk1498drivers/block/ide-tape.cprintk ("ide-tape.c bug - postponed_rq not NULL in idetape_postpone_request\n");
printk1542drivers/block/ide-tape.cprintk ("%s: idetape_poll_for_dsc_direct called\n",drive->name);
printk1609drivers/block/ide-tape.cprintk ("%s: idetape_poll_for_dsc called\n",drive->name);
printk1697drivers/block/ide-tape.cprintk ("ide-tape: Putting back postponed request\n");
printk1727drivers/block/ide-tape.cprintk ("DSC received\n");
printk1731drivers/block/ide-tape.cprintk ("ide-tape: %s: I/O error, ",drive->name);
printk1740drivers/block/ide-tape.cprintk ("ide-tape: ide-tape bug - Callback function not set !\n");
printk1749drivers/block/ide-tape.cprintk ("ide-tape: %s: DSC timeout.\n",drive->name);
printk1755drivers/block/ide-tape.cprintk ("ide-tape: ide-tape bug - Callback function not set !\n");
printk1801drivers/block/ide-tape.cprintk ("ide-tape: Reached idetape_pc_callback\n");
printk1805drivers/block/ide-tape.cprintk ("Request completed\n");
printk1810drivers/block/ide-tape.cprintk ("Aborting request\n");
printk1826drivers/block/ide-tape.cprintk ("ide-tape: Reached idetape_read_callback\n");
printk1831drivers/block/ide-tape.cprintk ("Request completed\n");
printk1839drivers/block/ide-tape.cprintk ("Aborting request\n");
printk1854drivers/block/ide-tape.cprintk ("ide-tape: Reached idetape_write_callback\n");
printk1859drivers/block/ide-tape.cprintk ("Request completed\n");
printk1867drivers/block/ide-tape.cprintk ("Aborting request\n");
printk1952drivers/block/ide-tape.cprintk ("ide-tape: Creating INQUIRY packet command\n");
printk1978drivers/block/ide-tape.cprintk ("The INQUIRY Data Format is unknown to us !\n");
printk1979drivers/block/ide-tape.cprintk ("Assuming QIC-157C format.\n");
printk1983drivers/block/ide-tape.cprintk ("Dumping INQUIRY command results:\n");
printk1984drivers/block/ide-tape.cprintk ("Response Data Format: %d - ",result->response_format);
printk1987drivers/block/ide-tape.cprintk ("As specified in QIC-157 Revision C\n");
printk1990drivers/block/ide-tape.cprintk ("Unknown\n");
printk1994drivers/block/ide-tape.cprintk ("Device Type: %x - ",result->device_type);  
printk1996drivers/block/ide-tape.ccase 0: printk ("Direct-access Device\n");break;
printk1997drivers/block/ide-tape.ccase 1: printk ("Streaming Tape Device\n");break;
printk1998drivers/block/ide-tape.ccase 2: case 3: case 4: printk ("Reserved\n");break;
printk1999drivers/block/ide-tape.ccase 5: printk ("CD-ROM Device\n");break;
printk2000drivers/block/ide-tape.ccase 6: printk ("Reserved\n");
printk2001drivers/block/ide-tape.ccase 7: printk ("Optical memory Device\n");break;
printk2002drivers/block/ide-tape.ccase 0x1f: printk ("Unknown or no Device type\n");break;
printk2003drivers/block/ide-tape.cdefault: printk ("Reserved\n");
printk2006drivers/block/ide-tape.cprintk ("Removable Medium: %s",result->rmb ? "Yes\n":"No\n");
printk2008drivers/block/ide-tape.cprintk ("ANSI Version: %d - ",result->ansi_version);
printk2011drivers/block/ide-tape.cprintk ("QIC-157 Revision C\n");
printk2014drivers/block/ide-tape.cprintk ("Unknown\n");
printk2018drivers/block/ide-tape.cprintk ("ECMA Version: ");
printk2020drivers/block/ide-tape.cprintk ("%d\n",result->ecma_version);
printk2022drivers/block/ide-tape.cprintk ("Not supported\n");
printk2024drivers/block/ide-tape.cprintk ("ISO Version: ");
printk2026drivers/block/ide-tape.cprintk ("%d\n",result->iso_version);
printk2028drivers/block/ide-tape.cprintk ("Not supported\n");
printk2030drivers/block/ide-tape.cprintk ("Additional Length: %d\n",result->additional_length);
printk2031drivers/block/ide-tape.cprintk ("Vendor Identification: %s\n",result->vendor_id);
printk2032drivers/block/ide-tape.cprintk ("Product Identification: %s\n",result->product_id);
printk2033drivers/block/ide-tape.cprintk ("Product Revision Level: %s\n",result->revision_level);
printk2037drivers/block/ide-tape.cprintk ("Device type is not set to tape\n");
printk2040drivers/block/ide-tape.cprintk ("The removable flag is not set\n");
printk2043drivers/block/ide-tape.cprintk ("The Ansi Version is unknown to us !\n");
printk2044drivers/block/ide-tape.cprintk ("Assuming compliance with QIC-157C specification.\n");
printk2052drivers/block/ide-tape.cprintk ("ide-tape: Creating REQUEST SENSE packet command\n");
printk2073drivers/block/ide-tape.cprintk ("ide-tape: Reached idetape_request_sense_callback\n");
printk2077drivers/block/ide-tape.cprintk ("Request completed\n");
printk2083drivers/block/ide-tape.cprintk ("Error in REQUEST SENSE itself - Aborting request!\n");
printk2109drivers/block/ide-tape.cprintk ("ide-tape: sense key = %x, asc = %x, ascq = %x\n",result->sense_key,result->asc,result->ascq);
printk2118drivers/block/ide-tape.cprintk ("ide-tape: Creating TEST UNIT READY packet command\n");
printk2136drivers/block/ide-tape.cprintk ("ide-tape: Creating LOCATE packet command\n");
printk2158drivers/block/ide-tape.cprintk ("ide-tape: Creating REWIND packet command\n");
printk2180drivers/block/ide-tape.cprintk ("ide-tape: Creating MODE SENSE packet command - Page %d\n",page_code);
printk2213drivers/block/ide-tape.cprintk ("Creating WRITE FILEMARK packet command\n");
printk2215drivers/block/ide-tape.cprintk ("which will only flush buffered data\n");
printk2236drivers/block/ide-tape.cprintk ("Creating ERASE command\n");
printk2266drivers/block/ide-tape.cprintk ("ide-tape: Creating READ packet command\n");
printk2299drivers/block/ide-tape.cprintk ("ide-tape: Creating SPACE packet command\n");
printk2336drivers/block/ide-tape.cprintk ("ide-tape: Creating WRITE packet command\n");
printk2359drivers/block/ide-tape.cprintk ("ide-tape: Creating READ POSITION packet command\n");
printk2382drivers/block/ide-tape.cprintk ("ide-tape: Reached idetape_read_position_callback\n");
printk2390drivers/block/ide-tape.cprintk ("Request completed\n");
printk2391drivers/block/ide-tape.cprintk ("Dumping the results of the READ POSITION command\n");
printk2392drivers/block/ide-tape.cprintk ("BOP - %s\n",result->bop ? "Yes":"No");
printk2393drivers/block/ide-tape.cprintk ("EOP - %s\n",result->eop ? "Yes":"No");
printk2396drivers/block/ide-tape.cprintk ("ide-tape: Block location is unknown to the tape\n");
printk2397drivers/block/ide-tape.cprintk ("Aborting request\n");
printk2403drivers/block/ide-tape.cprintk ("Block Location - %lu\n",idetape_swap_long (result->first_block));
printk2411drivers/block/ide-tape.cprintk ("Aborting request\n");
printk2436drivers/block/ide-tape.cprintk ("ide-tape: Reached idetape_blkdev_ioctl\n");
printk2441drivers/block/ide-tape.cprintk ("Adding INQUIRY packet command to the tail of the request queue\n");
printk2450drivers/block/ide-tape.cprintk ("Adding LOCATE packet command to the tail of the request queue\n");
printk2496drivers/block/ide-tape.cprintk ("ide-tape: non pipelined mode bug\n");
printk2497drivers/block/ide-tape.cprintk ("Finished our active data request\n");
printk2498drivers/block/ide-tape.cprintk ("Requests in pipeline: %d\n",tape->current_number_of_stages);
printk2522drivers/block/ide-tape.cprintk ("Using ide_end\n");
printk2550drivers/block/ide-tape.cprintk ("Current request:\n");
printk2551drivers/block/ide-tape.cprintk ("rq_status: %d, rq_dev: %u, cmd: %d, errors: %d\n",rq->rq_status,(unsigned int) rq->rq_dev,rq->cmd,rq->errors);
printk2552drivers/block/ide-tape.cprintk ("sector: %ld, nr_sectors: %ld, current_nr_sectors: %ld\n",rq->sector,rq->nr_sectors,rq->current_nr_sectors);
printk2561drivers/block/ide-tape.cprintk ("ide-tape: Unsupported command in request queue\n");
printk2562drivers/block/ide-tape.cprintk ("ide-tape: The block device interface should not be used for data transfers.\n");
printk2563drivers/block/ide-tape.cprintk ("ide-tape: Use the character device interfaces\n");
printk2564drivers/block/ide-tape.cprintk ("ide-tape: /dev/ht0 and /dev/nht0 instead.\n");
printk2565drivers/block/ide-tape.cprintk ("ide-tape: (Run linux/drivers/block/MAKEDEV.ide to create them)\n");
printk2566drivers/block/ide-tape.cprintk ("ide-tape: Aborting request.\n");
printk2584drivers/block/ide-tape.cprintk ("ide-tape: ide-tape.c bug - Two DSC requests were queued\n");
printk2610drivers/block/ide-tape.cprintk ("ide-tape: Handling our own (not buffer cache originated) READ request\n");
printk2615drivers/block/ide-tape.cprintk ("ide-tape: DSC != 1 - Postponing read request\n");
printk2636drivers/block/ide-tape.cprintk ("ide-tape: Handling our own (not buffer cache originated) WRITE request\n");
printk2642drivers/block/ide-tape.cprintk ("ide-tape: DSC != 1 - Postponing write request\n");
printk2671drivers/block/ide-tape.cprintk ("ide-tape: DSC != 1 - Postponing packet command request\n");
printk2685drivers/block/ide-tape.cprintk ("ide-tape: bug in IDETAPE_REQUEST_CMD macro\n");
printk2781drivers/block/ide-tape.cprintk ("idetape_queue_rw_tail: cmd=%d\n",cmd);
printk2793drivers/block/ide-tape.cprintk ("Using ide_tail\n");
printk2818drivers/block/ide-tape.cprintk ("Reached idetape_add_chrdev_write_request\n");
printk2819drivers/block/ide-tape.cprintk ("Trying to allocate stage - ");
printk2912drivers/block/ide-tape.cprintk ("ide-tape: ide-tape pipeline bug\n");    
printk2995drivers/block/ide-tape.cprintk ("ide-tape: pc_stack_index=%d\n",tape->pc_stack_index);
printk3023drivers/block/ide-tape.cprintk ("ide-tape: rq_stack_index=%d\n",tape->rq_stack_index);
printk3047drivers/block/ide-tape.cprintk ("Reached idetape_blkdev_open\n");
printk3068drivers/block/ide-tape.cprintk ("Reached idetape_blkdev_release\n");
printk3092drivers/block/ide-tape.cprintk ("Reached idetape_chrdev_lseek\n");
printk3097drivers/block/ide-tape.cprintk ("ide-tape: Rewinding tape failed\n");
printk3141drivers/block/ide-tape.cprintk ("Reached idetape_chrdev_read\n");
printk3159drivers/block/ide-tape.cprintk ("Adding a READ request to the block device request queue\n");
printk3166drivers/block/ide-tape.cprintk ("ide-tape: Error occured while reading\n");
printk3170drivers/block/ide-tape.cprintk ("Copying %d bytes to the user space memory\n",ctl_bytes);
printk3192drivers/block/ide-tape.cprintk ("Reached idetape_chrdev_read_remainder\n");
printk3207drivers/block/ide-tape.cprintk ("ide-tape: Padding read to block boundary\n");
printk3212drivers/block/ide-tape.cprintk ("Adding a READ request to the block device request queue\n");
printk3217drivers/block/ide-tape.cprintk ("ide-tape: Error occured while reading\n");
printk3226drivers/block/ide-tape.cprintk ("Copying %d bytes to the user space memory\n",count);
printk3242drivers/block/ide-tape.cprintk ("Reached idetape_chrdev_write\n");
printk3269drivers/block/ide-tape.cprintk ("ide-tape: Error occured while writing\n");
printk3293drivers/block/ide-tape.cprintk ("Reached idetape_chrdev_write_remainder\n");
printk3304drivers/block/ide-tape.cprintk ("Copying %d bytes from the user space memory\n",count);
printk3310drivers/block/ide-tape.cprintk ("ide-tape: Padding written data to block boundary\n");
printk3316drivers/block/ide-tape.cprintk ("Adding a WRITE request to the block device request queue\n");
printk3322drivers/block/ide-tape.cprintk ("ide-tape: Error occured while writing\n");
printk3351drivers/block/ide-tape.cprintk ("Reached idetape_chrdev_ioctl, cmd=%u\n",cmd);
printk3419drivers/block/ide-tape.cprintk ("Handling MTFSF command\n");
printk3425drivers/block/ide-tape.cprintk ("Handling MTFSFM command\n");
printk3432drivers/block/ide-tape.cprintk ("Handling MTBSF command\n");
printk3438drivers/block/ide-tape.cprintk ("Handling MTBSFM command\n");
printk3445drivers/block/ide-tape.cprintk ("Handling MTWEOF command\n");
printk3456drivers/block/ide-tape.cprintk ("Handling MTREW command\n");
printk3461drivers/block/ide-tape.cprintk ("Handling MTNOP command\n");
printk3467drivers/block/ide-tape.cprintk ("Handling MTEOM command\n");
printk3474drivers/block/ide-tape.cprintk ("Handling MTERASE command\n");
printk3481drivers/block/ide-tape.cprintk ("ide-tape: MTIO operation %d not supported\n",mt_op);
printk3501drivers/block/ide-tape.cprintk ("Reached idetape_chrdev_open\n");
printk3524drivers/block/ide-tape.cprintk ("ide-tape: Rewinding tape failed\n");
printk3550drivers/block/ide-tape.cprintk ("Reached idetape_chrdev_release\n");
printk3562drivers/block/ide-tape.cprintk ("ide-tape: Couldn't write a filemark\n");
printk3569drivers/block/ide-tape.cprintk ("ide-tape: Couldn't flush buffers\n");
printk3576drivers/block/ide-tape.cprintk ("ide-tape: Rewinding tape failed\n");
printk3627drivers/block/ide-tape.cprintk ("Reached idetape_rewind_tape\n");
printk3672drivers/block/ide-tape.cprintk ("Reached idetape_kmalloc_stage\n");
printk3735drivers/block/ide-tape.cprintk ("Reached idetape_kfree_stage\n");
printk3764drivers/block/ide-tape.cprintk ("Reached idetape_copy_buffer_from_stage\n");
printk3790drivers/block/ide-tape.cprintk ("Reached idetape_copy_buffer_to_stage\n");
printk3818drivers/block/ide-tape.cprintk ("Reached idetape_increase_max_pipeline_stages\n");
printk3831drivers/block/ide-tape.cprintk ("Maximum number of stages: %d\n",tape->max_number_of_stages);
printk3848drivers/block/ide-tape.cprintk ("Reached idetape_add_stage_tail\n");
printk3854drivers/block/ide-tape.cprintk ("Adding to the tail of the pipeline\n");
printk3909drivers/block/ide-tape.cprintk ("Using ide_end\n");
printk3931drivers/block/ide-tape.cprintk ("Reached idetape_active_next_stage\n");
printk3933drivers/block/ide-tape.cprintk ("ide-tape: ide-tape.c bug - tape->first_stage is NULL\n");
printk457drivers/block/ide.cprintk("%s: ide_set_handler: handler not null; old=%p, new=%p\n",
printk611drivers/block/ide.cprintk("%s: ATAPI reset complete\n", drive->name);
printk618drivers/block/ide.cprintk("%s: ATAPI reset timed-out, status=0x%02x\n", drive->name, stat);
printk642drivers/block/ide.cprintk("%s: reset timed-out, status=0x%02x\n", hwif->name, tmp);
printk644drivers/block/ide.cprintk("%s: reset: ", hwif->name);
printk646drivers/block/ide.cprintk("success\n");
printk648drivers/block/ide.cprintk("master: ");
printk650drivers/block/ide.ccase 1: printk("passed");
printk652drivers/block/ide.ccase 2: printk("formatter device error");
printk654drivers/block/ide.ccase 3: printk("sector buffer error");
printk656drivers/block/ide.ccase 4: printk("ECC circuitry error");
printk658drivers/block/ide.ccase 5: printk("controlling MPU error");
printk660drivers/block/ide.cdefault:printk("error (0x%02x?)", tmp);
printk663drivers/block/ide.cprintk("; slave: failed");
printk664drivers/block/ide.cprintk("\n");
printk795drivers/block/ide.cprintk("%s: %s: status=0x%02x", drive->name, msg, stat);
printk798drivers/block/ide.cprintk(" { ");
printk800drivers/block/ide.cprintk("Busy ");
printk802drivers/block/ide.cif (stat & READY_STAT)  printk("DriveReady ");
printk803drivers/block/ide.cif (stat & WRERR_STAT)  printk("DeviceFault ");
printk804drivers/block/ide.cif (stat & SEEK_STAT)  printk("SeekComplete ");
printk805drivers/block/ide.cif (stat & DRQ_STAT)  printk("DataRequest ");
printk806drivers/block/ide.cif (stat & ECC_STAT)  printk("CorrectedError ");
printk807drivers/block/ide.cif (stat & INDEX_STAT)  printk("Index ");
printk808drivers/block/ide.cif (stat & ERR_STAT)  printk("Error ");
printk810drivers/block/ide.cprintk("}");
printk813drivers/block/ide.cprintk("\n");
printk816drivers/block/ide.cprintk("%s: %s: error=0x%02x", drive->name, msg, err);
printk819drivers/block/ide.cprintk(" { ");
printk820drivers/block/ide.cif (err & BBD_ERR)  printk("BadSector ");
printk821drivers/block/ide.cif (err & ECC_ERR)  printk("UncorrectableError ");
printk822drivers/block/ide.cif (err & ID_ERR)  printk("SectorIdNotFound ");
printk823drivers/block/ide.cif (err & ABRT_ERR)  printk("DriveStatusError ");
printk824drivers/block/ide.cif (err & TRK0_ERR)  printk("TrackZeroNotFound ");
printk825drivers/block/ide.cif (err & MARK_ERR)  printk("AddrMarkNotFound ");
printk826drivers/block/ide.cprintk("}");
printk830drivers/block/ide.cprintk(", LBAsect=%ld", (unsigned long)
printk836drivers/block/ide.cprintk(", CHS=%d/%d/%d",
printk843drivers/block/ide.cprintk(", sector=%ld", HWGROUP(drive)->rq->sector);
printk847drivers/block/ide.cprintk("\n");
printk907drivers/block/ide.cprintk("%s: DMA disabled\n", drive->name);
printk950drivers/block/ide.cprintk("%s:  read: sectors(%ld-%ld), buffer=0x%08lx, remaining=%ld\n",
printk979drivers/block/ide.cprintk("%s: write: sector %ld, buffer=0x%08lx, remaining=%ld\n",
printk1018drivers/block/ide.cprintk("%s: multwrite: sector %ld, buffer=0x%08lx, count=%d, remaining=%ld\n",
printk1145drivers/block/ide.cprintk("%s: do_special: 0x%02x\n", drive->name, s->all);
printk1171drivers/block/ide.cprintk("%s: bad special flag: 0x%02x\n", drive->name, s->all);
printk1228drivers/block/ide.cprintk("%s: %sing: LBAsect=%ld, sectors=%ld, buffer=0x%08lx\n",
printk1247drivers/block/ide.cprintk("%s: %sing: CHS=%d/%d/%d, sectors=%ld, buffer=0x%08lx\n",
printk1268drivers/block/ide.cprintk("%s: no DRQ after issuing %s\n", drive->name,
printk1288drivers/block/ide.cprintk("%s: DRIVE_CMD cmd=0x%02x sc=0x%02x fr=0x%02x\n",
printk1300drivers/block/ide.cprintk("%s: DRIVE_CMD (null)\n", drive->name);
printk1306drivers/block/ide.cprintk("%s: bad command: %d\n", drive->name, rq->cmd);
printk1321drivers/block/ide.cprintk("%s: do_request: current=0x%08lx\n", hwif->name, (unsigned long) rq);
printk1326drivers/block/ide.cprintk("%s: bad device number: %s\n",
printk1333drivers/block/ide.cprintk("%s: block not locked\n", drive->name);
printk1340drivers/block/ide.cprintk("%s%c: bad access: block=%ld, count=%ld\n", drive->name,
printk1348drivers/block/ide.cprintk("%s: [EZD] accessing sector 1 instead of sector 0\n", drive->name);
printk1366drivers/block/ide.cprintk("%s: drive not ready for command\n", drive->name);
printk1389drivers/block/ide.cprintk("%s: media type %d not supported\n",
printk1423drivers/block/ide.cprintk("%s: EEeekk!! handler not NULL in ide_do_request()\n", hwgroup->hwif->name);
printk1504drivers/block/ide.cprintk("%s: marginal timeout\n", drive->name);
printk1611drivers/block/ide.cprintk("ide: probable bad entry for /dev/hd%c%d\n",
printk1613drivers/block/ide.cprintk("ide: to fix it, run:  /usr/src/linux/drivers/block/MAKEDEV.ide\n");
printk1956drivers/block/ide.cprintk("%s: VLB_SYNC not supported by this kernel\n", drive->name);
printk2074drivers/block/ide.cprintk("%s: EATA SCSI HBA %.10s\n", drive->name, id->model);
printk2100drivers/block/ide.cprintk("%s: %s, ATAPI ", drive->name, id->model);
printk2105drivers/block/ide.cprintk ("CDROM drive\n");
printk2111drivers/block/ide.cprintk ("CDROM ");
printk2116drivers/block/ide.cprintk ("TAPE drive\n");
printk2124drivers/block/ide.cprintk ("ide-tape: The tape is not supported by this version of the driver\n");
printk2128drivers/block/ide.cprintk ("TAPE ");
printk2132drivers/block/ide.cprintk("Type %d - Unknown device\n", type);
printk2135drivers/block/ide.cprintk("- not supported by this kernel\n");
printk2194drivers/block/ide.cprintk ("%s: %.40s, %ldMB w/%dKB Cache, %sCHS=%d/%d/%d",
printk2209drivers/block/ide.cprintk(", DMA");
printk2211drivers/block/ide.cprintk("\n");
printk2251drivers/block/ide.cprintk("%s: probing with STATUS instead of ALTSTATUS\n", drive->name);
printk2280drivers/block/ide.cprintk("%s: IRQ probe failed (%d)\n", drive->name, irqs);
printk2311drivers/block/ide.cprintk("probing for %s: present=%d, media=%d, probetype=%s\n",
printk2332drivers/block/ide.cprintk("%s: no response (status = 0x%02x)\n", drive->name, GET_STAT());
printk2364drivers/block/ide.cprintk ("%s: non-IDE drive, CHS=%d/%d/%d\n",
printk2369drivers/block/ide.cprintk("%s: ATAPI cdrom (?)\n", drive->name);
printk2379drivers/block/ide.cprintk("%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n",
printk2401drivers/block/ide.cprintk("%s: ERROR, PORTS ALREADY IN USE\n", drive->name);
printk2406drivers/block/ide.cprintk("%s: ports already in use, skipping probe\n", hwif->name);
printk2412drivers/block/ide.cprintk("%s: probing for first 2 of %d possible drives\n", hwif->name, MAX_DRIVES);
printk2638drivers/block/ide.cprintk("ide_setup: %s", s);
printk2665drivers/block/ide.cprintk(" -- USE \"ide%c=serialize\" INSTEAD", '0'+hw);
printk2721drivers/block/ide.cprintk(" -- HT6560 PORT 0x3e6 ALREADY IN USE");
printk2756drivers/block/ide.cprintk(" -- BAD OPTION\n");
printk2759drivers/block/ide.cprintk("-- NOT SUPPORTED ON ide%d", hw);
printk2761drivers/block/ide.cprintk("\n");
printk2809drivers/block/ide.cprintk("%s [%d/%d/%d]", msg, drive->bios_cyl, drive->bios_head, drive->bios_sect);
printk2884drivers/block/ide.cprintk(" -- FAILED!");
printk2917drivers/block/ide.cprintk("%s at 0x%03x-0x%03x,0x%03x on irq %d", hwif->name,
printk2920drivers/block/ide.cprintk(" (serialized with %s)", hwgroup->hwif->name);
printk2921drivers/block/ide.cprintk("\n");
printk2945drivers/block/ide.cprintk("ide: pcibios access failed - %s\n", pcibios_strerror(rc));
printk2954drivers/block/ide.cprintk("serialized, disabled unmasking\n");
printk2964drivers/block/ide.cprintk("ide: buggy RZ1000 interface: ");
printk2968drivers/block/ide.cprintk("not enabled\n");
printk2974drivers/block/ide.cprintk("disabled read-ahead\n");
printk3057drivers/block/ide.cprintk("%s: DISABLED, NO IRQ\n", hwif->name);
printk3064drivers/block/ide.cprintk("%s: CANNOT SHARE IRQ WITH OLD HARDDISK DRIVER (hd.c)\n", hwif->name);
printk3086drivers/block/ide.cprintk("%s: request_fn NOT DEFINED\n", hwif->name);
printk3090drivers/block/ide.cprintk("%s: UNABLE TO GET MAJOR NUMBER %d\n", hwif->name, hwif->major);
printk3092drivers/block/ide.cprintk("%s: UNABLE TO GET IRQ %d\n", hwif->name, hwif->irq);
printk243drivers/block/ll_rw_blk.cprintk("drive_stat_acct: cmd not R/W?\n");
printk314drivers/block/ll_rw_blk.cprintk("attempt to access beyond end of device\n");
printk353drivers/block/ll_rw_blk.cprintk("make_request: bad block dev cmd, must be R/W/RA/WA\n");
printk447drivers/block/ll_rw_blk.cprintk("Trying to read nonexistent block-device %s (%ld)\n",
printk456drivers/block/ll_rw_blk.cprintk("Can't page to read-only device %s\n",
printk502drivers/block/ll_rw_blk.cprintk(
printk519drivers/block/ll_rw_blk.cprintk(
printk527drivers/block/ll_rw_blk.cprintk("Can't write to read-only device %s\n",
printk567drivers/block/ll_rw_blk.cprintk("ll_rw_swap_file: trying to swap nonexistent block-device\n");
printk575drivers/block/ll_rw_blk.cprintk("Can't swap to read-only device %s\n",
printk168drivers/block/rd.cprintk("RAMDISK2 : Could not get major %d", MAJOR_NR);
printk226drivers/block/rd.cprintk(KERN_NOTICE
printk246drivers/block/rd.cprintk(KERN_NOTICE
printk255drivers/block/rd.cprintk(KERN_NOTICE
printk261drivers/block/rd.cprintk(KERN_NOTICE
printk274drivers/block/rd.cprintk(KERN_NOTICE
printk308drivers/block/rd.cprintk(KERN_NOTICE
printk340drivers/block/rd.cprintk(KERN_NOTICE
printk348drivers/block/rd.cprintk("RAMDISK: image too big! (%d/%d blocks)\n",
printk358drivers/block/rd.cprintk(KERN_ERR "RAMDISK: could not allocate buffer\n");
printk362drivers/block/rd.cprintk(KERN_NOTICE "RAMDISK: Loading %d blocks into ram disk... ", nblocks);
printk369drivers/block/rd.cprintk("%c\b", rotator[rotate & 0x3]);
printk373drivers/block/rd.cprintk("done.\n");
printk497drivers/block/rd.cprintk(KERN_ERR "%s", x);
printk510drivers/block/rd.cprintk(KERN_ERR "RAMDISK: Couldn't allocate gzip buffer\n");
printk515drivers/block/rd.cprintk(KERN_ERR "RAMDISK: Couldn't allocate gzip window\n");
printk167drivers/block/triton.cprintk("%s: bad DMA status: 0x%02x\n", drive->name, dma_stat);
printk212drivers/block/triton.cprintk("%s: DMA table too small\n", drive->name);
printk229drivers/block/triton.cprintk("%s: empty DMA table?\n", drive->name);
printk283drivers/block/triton.cprintk("triton_dmaproc: unsupported func: %d\n", func);
printk312drivers/block/triton.cprintk("         %s ", unit ? "slave :" : "master:");
printk313drivers/block/triton.cprintk( "fastDMA=%s",  (flags&9)  ? "on " : "off");
printk314drivers/block/triton.cprintk(" PreFetch=%s",  (flags&4)  ? "on " : "off");
printk315drivers/block/triton.cprintk(" IORDY=%s",  (flags&2)  ? "on " : "off");
printk316drivers/block/triton.cprintk(" fastPIO=%s\n",  ((flags&9)==1)  ? "on " : "off");
printk339drivers/block/triton.cprintk("ide: Triton IDE ports are not enabled\n");
printk341drivers/block/triton.cprintk("ide: Triton BM-DMA feature is not enabled\n");
printk353drivers/block/triton.cprintk("ide: neither Triton IDE port is enabled\n");
printk356drivers/block/triton.cprintk("ide: Triton BM-IDE on PCI bus %d function %d\n", bus, fn);
printk379drivers/block/triton.cprintk("    %s: BusMaster DMA at 0x%04x-0x%04x", hwif->name, base, base+7);
printk381drivers/block/triton.cprintk(" -- ERROR, PORTS ALREADY IN USE");
printk400drivers/block/triton.cprintk("\n    %s timing: (0x%04x) sample_CLKs=%d, recovery_CLKs=%d\n",
printk406drivers/block/triton.cquit: if (rc) printk("ide: pcibios access failed - %s\n", pcibios_strerror(rc));
printk72drivers/block/umc8672.cprintk ("UMC8672 not found\n");
printk84drivers/block/umc8672.cprintk ("UMC 8672 drive speed out of range. Drive %d Speed %d\n",
printk86drivers/block/umc8672.cprintk ("UMC support aborted\n");
printk105drivers/block/umc8672.cprintk ("Speeds for UMC8672 \n");
printk107drivers/block/umc8672.cprintk ("Drive %d speed %d\n",i,speed[i]);
printk121drivers/block/xd.cprintk("xd_init: unable to get major number %d\n",MAJOR_NR);
printk162drivers/block/xd.cprintk("xd_geninit: detected a%s controller (type %d) at address %p\n",xd_sigs[controller].name,controller,address);
printk167drivers/block/xd.cprintk("xd_geninit: detected %d hard drive%s (using IRQ%d & DMA%d)\n",xd_drives,xd_drives == 1 ? "" : "s",xd_irq,xd_dma);
printk169drivers/block/xd.cprintk("xd_geninit: drive %d geometry - heads = %d, cylinders = %d, sectors = %d\n",i,xd_info[i].heads,xd_info[i].cylinders,xd_info[i].sectors);
printk173drivers/block/xd.cprintk("xd_geninit: unable to get DMA%d\n",xd_dma);
printk178drivers/block/xd.cprintk("xd_geninit: unable to get IRQ%d\n",xd_irq);
printk232drivers/block/xd.cprintk("do_xd_request: unknown request\n"); break;
printk341drivers/block/xd.cprintk("xd_readwrite: operation = %s, drive = %d, buffer = 0x%X, block = %d, count = %d\n",operation == READ ? "read" : "write",drive,buffer,block,count);
printk354drivers/block/xd.cprintk("xd_readwrite: drive = %d, head = %d, cylinder = %d, sector = %d, count = %d\n",drive,head,cylinder,sector,temp);
printk362drivers/block/xd.cprintk("xd_readwrite: timeout, recalibrating drive\n");
printk367drivers/block/xd.ccase 0: printk("xd_readwrite: drive error, code = 0x%X",sense[0] & 0x0F); break;
printk368drivers/block/xd.ccase 1: printk("xd_readwrite: controller error, code = 0x%X",sense[0] & 0x0F); break;
printk369drivers/block/xd.ccase 2: printk("xd_readwrite: command error, code = 0x%X",sense[0] & 0x0F); break;
printk370drivers/block/xd.ccase 3: printk("xd_readwrite: miscellaneous error, code = 0x%X",sense[0] & 0x0F); break;
printk373drivers/block/xd.cprintk(" - drive = %d, head = %d, cylinder = %d, sector = %d\n",sense[1] & 0xE0,sense[1] & 0x1F,((sense[2] & 0xC0) << 2) | sense[3],sense[2] & 0x3F);
printk375drivers/block/xd.cprintk(" - no valid disk address\n");
printk390drivers/block/xd.cprintk("xd_recalibrate: warning! error recalibrating, controller may be unstable\n");
printk398drivers/block/xd.cprintk("xd_interrupt_handler: interrupt detected\n");
printk404drivers/block/xd.cprintk("xd_interrupt_handler: unexpected interrupt\n");
printk413drivers/block/xd.cprintk("xd_setup_dma: using PIO, transfer overlaps 64k boundary\n");
printk426drivers/block/xd.cprintk("xd_setup_dma: using PIO, cannot DMA above 16 meg\n");
printk461drivers/block/xd.cprintk("xd_command: command = 0x%X, mode = 0x%X, indata = 0x%X, outdata = 0x%X, sense = 0x%X\n",command,mode,indata,outdata,sense);
printk509drivers/block/xd.cprintk("xd_command: warning! sense command failed!\n");
printk513drivers/block/xd.cprintk("xd_command: completed with csb = 0x%X\n",csb);
printk538drivers/block/xd.cdefault:        printk("xd_dtc_init_controller: unsupported BIOS address %p\n",address);
printk567drivers/block/xd.cprintk("xd_dtc_init_drive: error setting step rate for drive %d\n",drive);
printk570drivers/block/xd.cprintk("xd_dtc_init_drive: error reading geometry for drive %d\n",drive);
printk582drivers/block/xd.cdefault:        printk("xd_wd_init_controller: unsupported BIOS address %p\n",address);
printk611drivers/block/xd.cprintk("xd_wd_init_drive: error reading geometry for drive %d\n",drive);  
printk621drivers/block/xd.cdefault:  printk("xd_seagate_init_controller: unsupported BIOS address %p\n",address);
printk643drivers/block/xd.cprintk("xd_seagate_init_drive: error reading geometry from drive %d\n",drive);
printk654drivers/block/xd.cdefault:  printk("xd_omti_init_controller: unsupported BIOS address %p\n",address);
printk727drivers/block/xd.cprintk("xd_setparam: error setting characteristics for drive %d\n",drive);
printk176drivers/cdrom/aztcd.c#define RETURNM(message,value) {printk("aztcd: Warning: %s failed\n",message);\
printk178drivers/cdrom/aztcd.c#define RETURN(message)        {printk("aztcd: Warning: %s failed\n",message);\
printk295drivers/cdrom/aztcd.c{ printk("aztcd: Error Wait OP_OK\n");
printk308drivers/cdrom/aztcd.c{ printk("aztcd: Error Wait PA_OK\n");
printk321drivers/cdrom/aztcd.c{ if (azt_init_end) printk("aztcd: Error Wait STEN_LOW commands:%x\n",aztCmd);
printk334drivers/cdrom/aztcd.c{ printk("aztcd: Error Wait DTEN_OK\n");
printk349drivers/cdrom/aztcd.cif (AztTimeout <= 0) printk("aztcd: Error Wait STEN_LOW_WAIT command:%x\n",aztCmd);
printk361drivers/cdrom/aztcd.cprintk("aztcd: Error aztStatTimer: Timeout\n");
printk412drivers/cdrom/aztcd.cprintk("aztcd: Executing command %x\n",cmd);
printk431drivers/cdrom/aztcd.cprintk("### Error 1 aztcd: aztSendCmd %x  Error Code %x\n",cmd,data);
printk435drivers/cdrom/aztcd.c{ printk("### Error 2 aztcd: aztSendCmd %x \n",cmd);
printk449drivers/cdrom/aztcd.cprintk("aztcd: play start=%02x:%02x:%02x  end=%02x:%02x:%02x\n", \
printk468drivers/cdrom/aztcd.cprintk("### Error 1 aztcd: sendAztCmd %x  Error Code %x\n",cmd,data);
printk472drivers/cdrom/aztcd.c{ printk("### Error 2 aztcd: sendAztCmd %x\n ",cmd);
printk486drivers/cdrom/aztcd.cprintk("aztcd: aztSeek %02x:%02x:%02x\n", \
printk501drivers/cdrom/aztcd.cprintk("### Error 1 aztcd: aztSeek\n");
printk505drivers/cdrom/aztcd.c{ printk("### Error 2 aztcd: aztSeek\n ");
printk520drivers/cdrom/aztcd.cprintk("aztcd: set disk type command: type= %i\n",type);
printk534drivers/cdrom/aztcd.cprintk("### Error 1 aztcd: aztSetDiskType %x Error Code %x\n",type,data);
printk538drivers/cdrom/aztcd.c{ printk("### Error 2 aztcd: aztSetDiskType %x\n ",type);
printk581drivers/cdrom/aztcd.cprintk("aztcd: Status = %x\n",st);
printk584drivers/cdrom/aztcd.c{ printk("aztcd: AST_CMD_CHECK error or no status available\n");
printk623drivers/cdrom/aztcd.cprintk("aztcd: starting aztcd_ioctl - Command:%x   Time: %li\n",cmd, jiffies);
printk624drivers/cdrom/aztcd.cprintk("aztcd Status %x\n", getAztStatus());
printk674drivers/cdrom/aztcd.cprintk("aztcd ioctl MULTISESSION\n");
printk694drivers/cdrom/aztcd.cprintk("aztcd multisession xa:%d, msf:%02x:%02x.%02x [%02x:%02x.%02x])\n",
printk699drivers/cdrom/aztcd.cprintk("atzcd multisession %d, lba:0x%08x [%02x:%02x.%02x])\n",
printk719drivers/cdrom/aztcd.cprintk("aztcd play: %02x:%02x.%02x to %02x:%02x.%02x\n",
printk754drivers/cdrom/aztcd.cprintk("aztcd play: %02x:%02x.%02x to %02x:%02x.%02x\n",
printk806drivers/cdrom/aztcd.cprintk("aztcd: exiting aztcd_ioctl - Error 1 - Command:%x\n",cmd);
printk813drivers/cdrom/aztcd.cprintk("aztcd: exiting aztcd_ioctl - Error 2 - Command:%x\n",cmd);
printk821drivers/cdrom/aztcd.cprintk("aztcd: exiting aztcd_ioctl - Error 3 - Command:%x\n",cmd);
printk879drivers/cdrom/aztcd.c{ printk("aztcd: AZTECH CD-ROM drive does not respond\n");
printk948drivers/cdrom/aztcd.cprintk("aztcd: exiting aztcd_ioctl Command:%x  Time:%li\n",cmd,jiffies);
printk961drivers/cdrom/aztcd.cprintk("aztcd: executing azt_transfer Time:%li\n",jiffies);
printk997drivers/cdrom/aztcd.cprintk(" do_aztcd_request(%ld+%ld) Time:%li\n", CURRENT -> sector, CURRENT -> nr_sectors,jiffies);
printk1000drivers/cdrom/aztcd.c{ printk("aztcd: Error, tried to mount an Audio CD\n");
printk1032drivers/cdrom/aztcd.cprintk("azt_next_bn:%x  azt_buf_in:%x azt_buf_out:%x  azt_buf_bn:%x\n", \
printk1034drivers/cdrom/aztcd.cprintk(" do_aztcd_request ends  Time:%li\n",jiffies);
printk1048drivers/cdrom/aztcd.cprintk("aztcd: I/O error 0x%02x\n", azt_error);
printk1052drivers/cdrom/aztcd.cprintk("aztcd: Read of Block %d Failed - Maybe Audio Disk?\n", azt_next_bn);
printk1055drivers/cdrom/aztcd.cprintk("aztcd: Read of Block %d Failed, Maybe Audio Disk? Giving up\n", azt_next_bn);
printk1078drivers/cdrom/aztcd.cprintk("AZT_S_IDLE\n");
printk1087drivers/cdrom/aztcd.cprintk("AZT_S_START\n");
printk1099drivers/cdrom/aztcd.cprintk("AZT_S_MODE\n");
printk1109drivers/cdrom/aztcd.cprintk("aztcd: Disk Changed or Not Ready 1 - Unmount Disk!\n");
printk1118drivers/cdrom/aztcd.cprintk("aztcd: Disk Changed or Not Ready 2 - Unmount Disk!\n");
printk1120drivers/cdrom/aztcd.cprintk((st & AST_DOOR_OPEN) ? "aztcd: door open\n" : "aztcd: disk removed\n");
printk1149drivers/cdrom/aztcd.cprintk("AZT_S_READ\n");
printk1158drivers/cdrom/aztcd.cprintk("aztcd: Disk Changed or Not Ready 3 - Unmount Disk!\n");
printk1168drivers/cdrom/aztcd.cprintk((st & AST_DOOR_OPEN) ? "aztcd: door open\n" : "aztcd: disk removed\n");
printk1197drivers/cdrom/aztcd.cprintk("aztcd: warning - trying to read beyond end of track\n");
printk1208drivers/cdrom/aztcd.cprintk("---reading msf-address %x:%x:%x  %x:%x:%x\n",msf.start.min,msf.start.sec,msf.start.frame,msf.end.min,msf.end.sec,msf.end.frame);
printk1209drivers/cdrom/aztcd.cprintk("azt_next_bn:%x  azt_buf_in:%x azt_buf_out:%x  azt_buf_bn:%x\n", \
printk1233drivers/cdrom/aztcd.cprintk("AZT_S_DATA\n");
printk1245drivers/cdrom/aztcd.cprintk("---AFL_DATA st:%x\n",st);
printk1249drivers/cdrom/aztcd.cprintk("aztcd: Read of Block %d Failed, Maybe Audio Disk ? Giving up\n", azt_next_bn);
printk1267drivers/cdrom/aztcd.cprintk("---AFL_STATUSorDATA st:%x\n",st);
printk1276drivers/cdrom/aztcd.cprintk("---default: st:%x\n",st);
printk1286drivers/cdrom/aztcd.cprintk("aztcd: warning - try to read 0 frames\n");
printk1299drivers/cdrom/aztcd.c{ printk("read_count:%d CURRENT->nr_sectors:%ld azt_buf_in:%d\n", azt_read_count,CURRENT->nr_sectors,azt_buf_in);
printk1300drivers/cdrom/aztcd.cprintk("azt_transfer_is_active:%x\n",azt_transfer_is_active);
printk1315drivers/cdrom/aztcd.cprintk("AZT_S_DATA; ---I've read data- read_count: %d\n",azt_read_count);
printk1316drivers/cdrom/aztcd.cprintk("azt_next_bn:%d  azt_buf_in:%d azt_buf_out:%d  azt_buf_bn:%d\n", \
printk1357drivers/cdrom/aztcd.cprintk("AZT_S_STOP\n");
printk1360drivers/cdrom/aztcd.cif (azt_read_count!=0) printk("aztcd: discard data=%x frames\n",azt_read_count);  /*???*/
printk1380drivers/cdrom/aztcd.cprintk("AZT_S_STOPPING\n");
printk1391drivers/cdrom/aztcd.cprintk("aztcd: Disk Changed or Not Ready 4 - Unmount Disk!\n");
printk1397drivers/cdrom/aztcd.cprintk("CURRENT_VALID %d azt_mode %d\n",
printk1425drivers/cdrom/aztcd.cprintk("aztcd: invalid state %d\n", azt_state);
printk1432drivers/cdrom/aztcd.c{ printk("aztcd: timeout in state %d\n", azt_state);
printk1445drivers/cdrom/aztcd.cprintk("aztcd: executing azt_invalidate_buffers\n");
printk1459drivers/cdrom/aztcd.cprintk("aztcd: starting aztcd_open\n");
printk1472drivers/cdrom/aztcd.cprintk("aztcd: Door Open?\n");
printk1478drivers/cdrom/aztcd.c{ printk("aztcd: Disk Changed or No Disk in Drive?\n");
printk1490drivers/cdrom/aztcd.cprintk("aztcd: exiting aztcd_open\n");
printk1502drivers/cdrom/aztcd.cprintk("aztcd: executing aztcd_release\n");
printk1503drivers/cdrom/aztcd.cprintk("inode: %p, inode->i_rdev: %x    file: %p\n",inode,inode->i_rdev,file);
printk1545drivers/cdrom/aztcd.cprintk("aztcd: no Aztech CD-ROM Initialization");
printk1548drivers/cdrom/aztcd.cprintk("aztcd: Aztech,Orchid,Okano,Wearnes,TXC CD-ROM Driver (C) 1994,1995 W.Zimmermann\n");
printk1549drivers/cdrom/aztcd.cprintk("aztcd: DriverVersion=%s BaseAddress=0x%x  For IDE/ATAPI-drives use ide-cd.c\n",AZT_VERSION,azt_port);
printk1550drivers/cdrom/aztcd.cprintk("aztcd: If you have problems, read /usr/src/linux/Documentation/cdrom/aztcd\n");
printk1553drivers/cdrom/aztcd.cprintk("aztcd: conflict, I/O port (%X) already used\n",
printk1560drivers/cdrom/aztcd.c{ printk("aztcd: no Soundwave32 card detected at base:%x init:%x config:%x id:%x\n",
printk1565drivers/cdrom/aztcd.c{ printk("aztcd: Soundwave32 card detected at %x  Version %x\n",
printk1589drivers/cdrom/aztcd.c{ printk("aztcd: no AZTECH CD-ROM drive found-Try boot parameter aztcd=<BaseAddress>,0x79\n");
printk1598drivers/cdrom/aztcd.c{ printk("aztcd: drive reset - please wait\n");
printk1610drivers/cdrom/aztcd.c{ printk("aztcd: no AZTECH CD-ROM drive found\n");
printk1618drivers/cdrom/aztcd.c{ printk("aztcd: Drive Status Error Status=%x\n",st);
printk1622drivers/cdrom/aztcd.cprintk("aztcd: Status = %x\n",st);
printk1646drivers/cdrom/aztcd.cprintk("aztcd: FirmwareVersion=");
printk1647drivers/cdrom/aztcd.cfor (count=1;count<max_count;count++) printk("%c",result[count]);
printk1648drivers/cdrom/aztcd.cprintk("<<>> ");
printk1651drivers/cdrom/aztcd.c{ printk("AZTECH drive detected\n"); /*AZTECH*/    
printk1654drivers/cdrom/aztcd.c{ printk("ORCHID or WEARNES drive detected\n"); /*ORCHID or WEARNES*/
printk1657drivers/cdrom/aztcd.c{ printk("TXC drive detected\n"); /*Conrad TXC*/
printk1660drivers/cdrom/aztcd.c{ printk("\nunknown drive or firmware version detected\n");
printk1661drivers/cdrom/aztcd.cprintk("aztcd may not run stable, if you want to try anyhow,\n");
printk1662drivers/cdrom/aztcd.cprintk("boot with: aztcd=<BaseAddress>,0x79\n");
printk1664drivers/cdrom/aztcd.c{ printk("aztcd: FirmwareVersion=");
printk1665drivers/cdrom/aztcd.cfor (count=1;count<5;count++) printk("%c",result[count]);
printk1666drivers/cdrom/aztcd.cprintk("<<>> ");
printk1667drivers/cdrom/aztcd.cprintk("Aborted\n");
printk1673drivers/cdrom/aztcd.cprintk("aztcd: Unable to get major %d for Aztech CD-ROM\n",
printk1697drivers/cdrom/aztcd.cif (msf->min  >=70) printk("aztcd: Error hsg2msf address Minutes\n");
printk1698drivers/cdrom/aztcd.cif (msf->sec  >=60) printk("aztcd: Error hsg2msf address Seconds\n");
printk1699drivers/cdrom/aztcd.cif (msf->frame>=75) printk("aztcd: Error hsg2msf address Frames\n");
printk1733drivers/cdrom/aztcd.c{       printk("aztcd: aztGetValue timeout\n");
printk1751drivers/cdrom/aztcd.cprintk("aztcd: starting aztGetQChannelInfo  Time:%li\n",jiffies);
printk1782drivers/cdrom/aztcd.cprintk("aztcd: exiting aztGetQChannelInfo  Time:%li\n",jiffies);
printk1794drivers/cdrom/aztcd.cprintk("aztcd: starting aztUpdateToc  Time:%li\n",jiffies);
printk1828drivers/cdrom/aztcd.c{ printk("aztcd: XA support experimental - mail results to zimmerma@rz.fht-esslingen.de\n");
printk1845drivers/cdrom/aztcd.cprintk("aztcd: Multisession support experimental\n");
printk1855drivers/cdrom/aztcd.cprintk("aztcd: exiting aztUpdateToc  Time:%li\n",jiffies);
printk1870drivers/cdrom/aztcd.cprintk("aztcd: starting aztGetDiskInfo  Time:%li\n",jiffies);
printk1902drivers/cdrom/aztcd.cprintk ("aztcd: exiting aztGetDiskInfo  Time:%li\n",jiffies);
printk1903drivers/cdrom/aztcd.cprintk("Disk Info: first %d last %d length %02X:%02X.%02X dez  first %02X:%02X.%02X dez\n",
printk1927drivers/cdrom/aztcd.cprintk("aztcd: starting aztGetMultiDiskInfo\n");
printk1947drivers/cdrom/aztcd.cprintk("leadin found track %d  pointIndex %x  limit %d\n",qInfo.track,qInfo.pointIndex,limit);
printk1984drivers/cdrom/aztcd.cprintk ("MultiDisk Info: first %d next %d last %d length %02x:%02x.%02x dez  first %02x:%02x.%02x dez  next %02x:%02x.%02x dez\n",
printk2006drivers/cdrom/aztcd.cprintk ("aztcd: exiting aztGetMultiDiskInfo  Time:%li\n",jiffies);
printk2021drivers/cdrom/aztcd.cprintk("aztcd: starting aztGetToc  Time:%li\n",jiffies);
printk2071drivers/cdrom/aztcd.cprintk("aztcd: exiting aztGetToc\n");
printk2073drivers/cdrom/aztcd.cprintk("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X dez  %02X:%02X.%02X dez\n",
printk2078drivers/cdrom/aztcd.cprintk("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X dez  %02X:%02X.%02X dez\n",
printk2097drivers/cdrom/aztcd.c{ printk("What's that: can't unregister aztcd\n");
printk2101drivers/cdrom/aztcd.cprintk("aztcd module released.\n");
printk563drivers/cdrom/cdu31a.cprintk("CDU31A: Got an interrupt but nothing was waiting\n");
printk588drivers/cdrom/cdu31a.cprintk("  Unable to set spin-down time: 0x%2.2x\n", res_reg[1]);
printk608drivers/cdrom/cdu31a.cprintk("  Unable to set mechanical parameters: 0x%2.2x\n", res_reg[1]);
printk623drivers/cdrom/cdu31a.cprintk("cdu31a: Resetting drive on error\n");
printk634drivers/cdrom/cdu31a.cprintk("cdu31a: Unable to spin up drive: 0x%2.2x\n", res_reg[1]);
printk705drivers/cdrom/cdu31a.cprintk("CDU31A timeout out %d\n", __LINE__);
printk764drivers/cdrom/cdu31a.cprintk("CDU31A timeout out %d\n", __LINE__);
printk793drivers/cdrom/cdu31a.cprintk("CDU31A timeout out %d\n", __LINE__);
printk875drivers/cdrom/cdu31a.cprintk("CDU31A timeout out %d\n", __LINE__);
printk934drivers/cdrom/cdu31a.cprintk("cdu31a: Too many consecutive attentions: %d\n",
printk1126drivers/cdrom/cdu31a.cprintk("CDU31A: Timeout while waiting to issue command\n");
printk1159drivers/cdrom/cdu31a.cprintk("CDU31A: Error aborting read, error = 0x%2.2x\n",
printk1364drivers/cdrom/cdu31a.cprintk("CDU31A: Got result that should have been error: %d\n",
printk1375drivers/cdrom/cdu31a.cprintk("CDU31A timeout out %d\n", __LINE__);
printk1400drivers/cdrom/cdu31a.cprintk("CDU31A timeout out %d\n", __LINE__);
printk1432drivers/cdrom/cdu31a.cprintk("CDU31A: Data block error: 0x%x\n", res_reg[0]);
printk1455drivers/cdrom/cdu31a.cprintk("CDU31A: Invalid block status: 0x%x\n", res_reg[0]);
printk1564drivers/cdrom/cdu31a.cprintk("CDU31A: TOC not read\n");
printk1589drivers/cdrom/cdu31a.cprintk("CDU31A: Request before beginning of media\n");
printk1596drivers/cdrom/cdu31a.cprintk("CDU31A: Request past end of media\n");
printk1602drivers/cdrom/cdu31a.cprintk("CDU31A: Request past end of media\n");
printk1615drivers/cdrom/cdu31a.cprintk("CDU31A: TOC not read\n");
printk1636drivers/cdrom/cdu31a.cprintk("CDU31A Warning: Read for block %d, expected %d\n",
printk1643drivers/cdrom/cdu31a.cprintk("CDU31A: TOC not read\n");
printk1649drivers/cdrom/cdu31a.cprintk("CDU31a: start request failed\n");
printk1671drivers/cdrom/cdu31a.cprintk("CDU31A: Read error: 0x%2.2x\n", res_reg[1]);
printk1740drivers/cdrom/cdu31a.cprintk("Entering sony_get_toc\n");
printk1771drivers/cdrom/cdu31a.cprintk("cdu31a: Error reading TOC: %x %x\n",
printk1789drivers/cdrom/cdu31a.cprintk("Trying session %d\n", session);
printk1799drivers/cdrom/cdu31a.cprintk("%2.2x %2.2x\n", res_reg[0], res_reg[1]);
printk1813drivers/cdrom/cdu31a.cprintk("cdu31a: too many sessions: %d\n", session);
printk1821drivers/cdrom/cdu31a.cprintk("Reading session %d\n", session);
printk1832drivers/cdrom/cdu31a.cprintk("cdu31a: Error reading session %d: %x %x\n",
printk1892drivers/cdrom/cdu31a.cprintk("Disk session %d, start track: %d, stop track: %d\n",
printk1899drivers/cdrom/cdu31a.cprintk("Leaving sony_get_toc\n");
printk1943drivers/cdrom/cdu31a.cprintk("Sony CDROM error 0x%2.2x (read_subcode)\n",
printk2075drivers/cdrom/cdu31a.cprintk("CDU31A: Got result that should have been error: %d\n",
printk2086drivers/cdrom/cdu31a.cprintk("CDU31A timeout out %d\n", __LINE__);
printk2125drivers/cdrom/cdu31a.cprintk("CDU31A timeout out %d\n", __LINE__);
printk2150drivers/cdrom/cdu31a.cprintk("CDU31A: Data block error: 0x%x\n", res_reg[0]);
printk2160drivers/cdrom/cdu31a.cprintk("CDU31A: Invalid block status: 0x%x\n", res_reg[0]);
printk2216drivers/cdrom/cdu31a.cprintk("CDU31A: Unable to set decode params: 0x%2.2x\n", res_reg[1]);
printk2241drivers/cdrom/cdu31a.cprintk("CDU31A: Data error on audio sector %d\n",
printk2259drivers/cdrom/cdu31a.cprintk("CDU31A: Unable to set decode params: 0x%2.2x\n", res_reg[1]);
printk2279drivers/cdrom/cdu31a.cprintk("CDU31A: Data error on audio sector %d\n",
printk2284drivers/cdrom/cdu31a.cprintk("CDU31A: Error reading audio data on sector %d: 0x%x\n",
printk2300drivers/cdrom/cdu31a.cprintk("CDU31A: Error reading audio data on sector %d: 0x%x\n",
printk2320drivers/cdrom/cdu31a.cprintk("CDU31A: Error return from audio read: 0x%x\n",
printk2345drivers/cdrom/cdu31a.cprintk("CDU31A: Unable to reset decode params: 0x%2.2x\n", res_reg[1]);
printk2367drivers/cdrom/cdu31a.cprintk("Sony CDROM error 0x%2.2x (CDROM%s)\n", result_buffer[1], name);
printk2607drivers/cdrom/cdu31a.cprintk("Params: %x %x %x %x %x %x %x\n", params[0], params[1],
printk2609drivers/cdrom/cdu31a.cprintk("Sony CDROM error 0x%2.2x (CDROMPLAYTRKIND\n", res_reg[1]);
printk2747drivers/cdrom/cdu31a.cprintk("Sony CDROM error 0x%2.2x (scd_open, spin up)\n", res_reg[1]);
printk2772drivers/cdrom/cdu31a.cprintk("Sony CDROM error 0x%2.2x (scd_open, read toc)\n", res_reg[1]);
printk2799drivers/cdrom/cdu31a.cprintk("CDU31A: Unable to set XA params: 0x%2.2x\n", res_reg[1]);
printk2815drivers/cdrom/cdu31a.cprintk("CDU31A: Unable to reset XA params: 0x%2.2x\n", res_reg[1]);
printk2981drivers/cdrom/cdu31a.cprintk("CDU31A: Unknown interface type: %s\n", strings);
printk3068drivers/cdrom/cdu31a.cprintk("Unable to get major %d for CDU-31a\n", MAJOR_NR);
printk3088drivers/cdrom/cdu31a.cprintk("Unable to grab IRQ%d for the CDU31A driver\n", cdu31a_irq);
printk3093drivers/cdrom/cdu31a.cprintk("Sony I/F CDROM : %8.8s %16.16s %8.8s\n",
printk3097drivers/cdrom/cdu31a.cprintk("  Capabilities: %s",
printk3101drivers/cdrom/cdu31a.cprintk(", audio");
printk3105drivers/cdrom/cdu31a.cprintk(", eject");
printk3109drivers/cdrom/cdu31a.cprintk(", LED");
printk3113drivers/cdrom/cdu31a.cprintk(", elec. Vol");
printk3117drivers/cdrom/cdu31a.cprintk(", sep. Vol");
printk3121drivers/cdrom/cdu31a.cprintk(", double speed");
printk3125drivers/cdrom/cdu31a.cprintk(", irq %d", cdu31a_irq);
printk3127drivers/cdrom/cdu31a.cprintk("\n");
printk3166drivers/cdrom/cdu31a.cprintk("Can't unregister cdu31a\n");
printk3170drivers/cdrom/cdu31a.cprintk("cdu31a module released.\n");
printk136drivers/cdrom/cm206.c#define debug(a) printk a
printk1051drivers/cdrom/cm206.cprintk("Can't unregister cm206\n");
printk1122drivers/cdrom/cm206.cprintk("cm206: v" VERSION);
printk1125drivers/cdrom/cm206.cprintk(" can't find adapter!\n");
printk1128drivers/cdrom/cm206.cprintk(" adapter at 0x%x", cm206_base);
printk1138drivers/cdrom/cm206.cprintk("can't find IRQ!\n");
printk1142drivers/cdrom/cm206.celse printk(" IRQ %d found\n", cm206_irq);
printk1145drivers/cdrom/cm206.cprintk(" using IRQ %d\n", cm206_irq);
printk1149drivers/cdrom/cm206.cprintk(" drive not there\n");
printk1154drivers/cdrom/cm206.cprintk("Firmware revision %d", e & dcf_revision_code);
printk1155drivers/cdrom/cm206.cif (e & dcf_transfer_rate) printk(" double");
printk1156drivers/cdrom/cm206.celse printk(" single");
printk1157drivers/cdrom/cm206.cprintk(" speed drive");
printk1158drivers/cdrom/cm206.cif (e & dcf_motorized_tray) printk(", motorized tray");
printk1160drivers/cdrom/cm206.cprintk("\nUnable to reserve IRQ---aborted\n");
printk1164drivers/cdrom/cm206.cprintk(".\n");
printk1166drivers/cdrom/cm206.cprintk("Cannot register for major %d!\n", MAJOR_NR);
printk1180drivers/cdrom/cm206.cprintk("%d kB adapter memory available, "  
printk1216drivers/cdrom/cm206.cprintk("cm206 removed\n");
printk181drivers/cdrom/gscd.cprintk("GSCD: GoldStar CD-ROM request error: invalid device.\n");
printk186drivers/cdrom/gscd.cprintk ("gscd: check_med_change\n");
printk276drivers/cdrom/gscd.cprintk("GSCD: bad cmd %d\n", CURRENT -> cmd);
printk283drivers/cdrom/gscd.cprintk("GSCD: this version supports only one device\n");
printk299drivers/cdrom/gscd.cprintk ("GSCD: dev %d, block %d, nsect %d\n", dev, block, nsect );
printk324drivers/cdrom/gscd.cprintk ( "GSCD: no disk or door open\n" );
printk331drivers/cdrom/gscd.cprintk ( "GSCD: disk invalid\n" );
printk345drivers/cdrom/gscd.cprintk ("GSCD: read msf %d:%d:%d\n", cmd[2], cmd[3], cmd[4] ); 
printk367drivers/cdrom/gscd.cprintk ( "GSCD: open\n" );
printk377drivers/cdrom/gscd.cprintk ( "GSCD: no disk or door open\n" );
printk399drivers/cdrom/gscd.cprintk ( "GSCD: release\n" );
printk469drivers/cdrom/gscd.cprintk ( "Wait for: %d\n", read );
printk514drivers/cdrom/gscd.cprintk ("GSCD: Status: %d\n", disk_state );
printk565drivers/cdrom/gscd.cprintk ("LOC_176 ");
printk570drivers/cdrom/gscd.cprintk ("GSCD: magic ...\n");       
printk588drivers/cdrom/gscd.cprintk ("LOC_205 ");                
printk605drivers/cdrom/gscd.cprintk ("LOC_181 ");                
printk650drivers/cdrom/gscd.cprintk ("\n");       
printk661drivers/cdrom/gscd.cprintk ("LOC_177 ");       
printk684drivers/cdrom/gscd.cprintk ("LOC_172 ");       
printk709drivers/cdrom/gscd.cprintk ("LOC_182 ");                      
printk743drivers/cdrom/gscd.cprintk ("LOC_189 ");                    
printk760drivers/cdrom/gscd.cprintk ("LOC_191 ");       
printk783drivers/cdrom/gscd.cprintk ("LOC_204 ");                      
printk797drivers/cdrom/gscd.cprintk ("LOC_205 ");                    
printk818drivers/cdrom/gscd.cprintk ("LOC_185 ");                    
printk891drivers/cdrom/gscd.cprintk ("DriveState: %d\n", curr_drv_state );
printk904drivers/cdrom/gscd.cprintk ("GSCD: init unit %d\n", num );
printk907drivers/cdrom/gscd.cprintk ("GSCD: identification: ");
printk910drivers/cdrom/gscd.cprintk ( "%c", resp[i] );
printk912drivers/cdrom/gscd.cprintk ("\n");
printk970drivers/cdrom/gscd.cprintk ( "Happy GoldStar !\n" );
printk980drivers/cdrom/gscd.cprintk("What's that: can't unregister GoldStar-module\n" );
printk985drivers/cdrom/gscd.cprintk( "GoldStar-module released.\n" );
printk1004drivers/cdrom/gscd.cprintk ("GSCD: version %s\n", GSCD_VERSION);
printk1005drivers/cdrom/gscd.cprintk ("GSCD: Trying to detect a Goldstar R420 CD-ROM drive at 0x%X.\n", gscd_port);
printk1009drivers/cdrom/gscd.cprintk("GSCD: Init failed, I/O port (%X) already in use.\n", gscd_port);
printk1018drivers/cdrom/gscd.cprintk ("GSCD: DMA kann ich noch nicht!\n" );
printk1028drivers/cdrom/gscd.cprintk ( "GSCD: GoldStar CD-ROM Drive is not found.\n" );
printk1035drivers/cdrom/gscd.cprintk ("GSCD: GoldStar Interface Adapter does not exist or H/W error\n" );
printk1044drivers/cdrom/gscd.cprintk ( "GSCD: Reset unit %d ... ",i );
printk1046drivers/cdrom/gscd.cprintk ( "done\n" );
printk1052drivers/cdrom/gscd.cprintk("GSCD: Unable to get major %d for GoldStar CD-ROM\n",
printk1065drivers/cdrom/gscd.cprintk ( "GSCD: GoldStar CD-ROM Drive found.\n" );
printk218drivers/cdrom/mcd.cprintk("mcd: Mitsumi CD-ROM request error: invalid device.\n");
printk388drivers/cdrom/mcd.cprintk("play: %02x:%02x.%02x to %02x:%02x.%02x\n",
printk434drivers/cdrom/mcd.cprintk("play: %02x:%02x.%02x to %02x:%02x.%02x\n",
printk637drivers/cdrom/mcd.cprintk("<int1-%02X>", st);
printk643drivers/cdrom/mcd.cprintk("<int0-%02X>", st);
printk655drivers/cdrom/mcd.cprintk(" do_mcd_request(%ld+%ld)\n", CURRENT -> sector, CURRENT -> nr_sectors);
printk685drivers/cdrom/mcd.cprintk(" do_mcd_request ends\n");
printk701drivers/cdrom/mcd.cprintk("mcd: I/O error 0x%02x", mcd_error);
printk703drivers/cdrom/mcd.cprintk(" (Door open)");
printk705drivers/cdrom/mcd.cprintk(" (Disk changed)");
printk708drivers/cdrom/mcd.cprintk(" (Read error)"); /* Bitch about the problem. */
printk721drivers/cdrom/mcd.cprintk(" Speed now 1x");   /* Pull my finger! */
printk724drivers/cdrom/mcd.cprintk("\n");
printk728drivers/cdrom/mcd.cprintk("mcd: read of block %d failed\n", mcd_next_bn);
printk734drivers/cdrom/mcd.cprintk("mcd: read of block %d failed, giving up\n", mcd_next_bn);
printk757drivers/cdrom/mcd.cprintk("mcd: Switching back to 2X speed!\n"); /* Tell 'em! */
printk772drivers/cdrom/mcd.cprintk("MCD_S_IDLE\n");
printk780drivers/cdrom/mcd.cprintk("MCD_S_START\n");
printk792drivers/cdrom/mcd.cprintk("MCD_S_MODE\n");
printk812drivers/cdrom/mcd.cprintk((st & MST_DOOR_OPEN) ? "mcd: door open\n" : "mcd: disk removed\n");
printk832drivers/cdrom/mcd.cprintk("MCD_S_READ\n");
printk852drivers/cdrom/mcd.cprintk((st & MST_DOOR_OPEN) ? "mcd: door open\n" : "mcd: disk removed\n");
printk880drivers/cdrom/mcd.cprintk("MCD_S_DATA\n");
printk886drivers/cdrom/mcd.cprintk("Status %02x\n",st);
printk893drivers/cdrom/mcd.cprintk("mcd: read of block %d failed\n", mcd_next_bn);
printk896drivers/cdrom/mcd.cprintk("mcd: read of block %d failed, giving up\n", mcd_next_bn);
printk951drivers/cdrom/mcd.cprintk(" %d ",QUICK_LOOP_COUNT-count);
printk958drivers/cdrom/mcd.cprintk("ended ");
printk969drivers/cdrom/mcd.cprintk("MCD_S_STOP\n");
printk1012drivers/cdrom/mcd.cprintk("MCD_S_STOPPING\n");
printk1042drivers/cdrom/mcd.cprintk("CURRENT_VALID %d mcd_mode %d\n",
printk1063drivers/cdrom/mcd.cprintk("mcd: invalid state %d\n", mcd_state);
printk1069drivers/cdrom/mcd.cprintk("mcd: timeout in state %d\n", mcd_state);
printk1113drivers/cdrom/mcd.cprintk("mcd: no disk in drive\n");
printk1169drivers/cdrom/mcd.cprintk("skip mcd_init\n");
printk1173drivers/cdrom/mcd.cprintk("mcd=0x%x,%d: ", mcd_port, mcd_irq);
printk1177drivers/cdrom/mcd.cprintk("Unable to get major %d for Mitsumi CD-ROM\n",
printk1183drivers/cdrom/mcd.cprintk("Init failed, I/O port (%X) already in use\n",
printk1203drivers/cdrom/mcd.cprintk("Init failed. No mcd device at 0x%x irq %d\n",
printk1212drivers/cdrom/mcd.cprintk("mitsumi get version failed at 0x%d\n",
printk1219drivers/cdrom/mcd.cprintk("Mitsumi status, type and version : %02X %c %x ",
printk1224drivers/cdrom/mcd.cprintk("Double Speed CD ROM\n");
printk1228drivers/cdrom/mcd.celse printk("Single Speed CD ROM\n");
printk1239drivers/cdrom/mcd.cprintk("Unable to get IRQ%d for Mitsumi CD-ROM\n", mcd_irq);
printk1409drivers/cdrom/mcd.cprintk("mcd: getValue timeout\n");
printk1509drivers/cdrom/mcd.cprintk("Disk Info: first %d last %d length %02x:%02x.%02x first %02x:%02x.%02x\n",
printk1593drivers/cdrom/mcd.cprintk("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X    %02X:%02X.%02X\n",
printk1598drivers/cdrom/mcd.cprintk("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X    %02X:%02X.%02X\n",
printk1615drivers/cdrom/mcd.c{ printk("mcd module in use - can't remove it.\n");
printk1619drivers/cdrom/mcd.c{ printk("What's that: can't unregister mcd\n");
printk1624drivers/cdrom/mcd.cprintk("mcd module released.\n");
printk798drivers/cdrom/mcdx.cprintk(MCDX ":: setup(%s, %d) called\n",
printk900drivers/cdrom/mcdx.cfor (i = 1; i < cmdlen; i++) printk(" 0x%02x", cmd[i]);
printk901drivers/cdrom/mcdx.cprintk("\n");
printk1032drivers/cdrom/mcdx.cprintk(MCDX ":: dprintf exeeds limit!!\n");
printk1033drivers/cdrom/mcdx.celse printk(MCDX ":: %s", s);
printk1044drivers/cdrom/mcdx.cprintk(MCDX ":: dprintf exeeds limit!!\n");
printk1045drivers/cdrom/mcdx.celse printk(MCDX ": %s", s);
printk140drivers/cdrom/optcd.cprintk("optcd: timeout waiting for STEN low\n");
printk142drivers/cdrom/optcd.cprintk("optcd: STEN low after %ld\n", count);
printk156drivers/cdrom/optcd.cprintk("optcd: timeout waiting for DTEN low\n");
printk158drivers/cdrom/optcd.cprintk("optcd: DTEN low after %ld\n", count);
printk189drivers/cdrom/optcd.cprintk("optcd: sleeping %d on status\n", sleep_timeout);
printk198drivers/cdrom/optcd.cprintk("optcd: woken up with %d to go, flags %d\n",
printk211drivers/cdrom/optcd.cprintk("optcd: DTEN while waiting for STEN\n");
printk223drivers/cdrom/optcd.cprintk("optcd: STEN while waiting for DTEN\n");
printk232drivers/cdrom/optcd.cprintk("optcd: executing command 0x%02x\n", cmd);
printk240drivers/cdrom/optcd.cprintk("optcd: acknowledge code 0x%02x\n", ack);
printk250drivers/cdrom/optcd.cprintk("optcd: params %02x:%02x:%02x %02x:%02x:%02x\n",
printk264drivers/cdrom/optcd.cprintk("optcd: acknowledge code 0x%02x\n", ack);
printk278drivers/cdrom/optcd.cprintk("optcd: returned execution status: 0x%02x\n", exec_status);
printk292drivers/cdrom/optcd.cprintk("optcd: returned execution status: 0x%02x\n", exec_status);
printk304drivers/cdrom/optcd.cprintk("optcd: read status: 0x%02x\n", status);
printk316drivers/cdrom/optcd.cprintk("optcd: read data: 0x%02x\n", data);
printk337drivers/cdrom/optcd.cprintk("optcd: reset drive\n");
printk348drivers/cdrom/optcd.cprintk("optcd: drive reset\n");
printk350drivers/cdrom/optcd.cprintk("optcd: reset failed\n");
printk398drivers/cdrom/optcd.cprintk("optcd: error bin2bcd %d\n", p);
printk412drivers/cdrom/optcd.cprintk("optcd: Error hsg2msf address Minutes\n");
printk414drivers/cdrom/optcd.cprintk("optcd: Error hsg2msf address Seconds\n");
printk416drivers/cdrom/optcd.cprintk("optcd: Error hsg2msf address Frames\n");
printk432drivers/cdrom/optcd.cprintk("optcd: Error msf2hsg address Minutes\n");
printk434drivers/cdrom/optcd.cprintk("optcd: Error msf2hsg address Seconds\n");
printk436drivers/cdrom/optcd.cprintk("optcd: Error msf2hsg address Frames\n");
printk479drivers/cdrom/optcd.cprintk("optcd: starting optGetQChannelInfo\n");
printk496drivers/cdrom/optcd.cprintk("optcd: exiting optGetQChannelInfo\n");
printk510drivers/cdrom/optcd.cprintk("optcd: starting optGetDiskInfo\n");
printk522drivers/cdrom/optcd.cprintk("optcd: got first: %d\n", DiskInfo.first);
printk529drivers/cdrom/optcd.cprintk("optcd: got last: %d\n", DiskInfo.last);
printk538drivers/cdrom/optcd.cprintk("optcd: got length: %x:%x.%x\n",
printk553drivers/cdrom/optcd.cprintk("optcd: got start: %x:%x.%x\n",
printk563drivers/cdrom/optcd.cprintk("optcd: exiting optGetDiskInfo\n");
printk575drivers/cdrom/optcd.cprintk("optcd: starting optGetToc\n");
printk595drivers/cdrom/optcd.cprintk("optcd: exiting optGetToc\n");
printk597drivers/cdrom/optcd.cprintk("i = %3d ctl-adr = %02x track %2d px "
printk609drivers/cdrom/optcd.cprintk("i = %3d ctl-adr = %02x track %2d px "
printk626drivers/cdrom/optcd.cprintk("optcd: starting optUpdateToc\n");
printk636drivers/cdrom/optcd.cprintk("optcd: exiting optUpdateToc\n");
printk658drivers/cdrom/optcd.cprintk("optcd: executing opt_invalidate_buffers\n");
printk671drivers/cdrom/optcd.cprintk("optcd: executing opt_transfer\n");
printk680drivers/cdrom/optcd.cprintk("optcd: found %d\n", i);
printk735drivers/cdrom/optcd.cprintk("optcd: I/O error 0x%02x\n", opt_error);
printk739drivers/cdrom/optcd.cprintk("optcd: read block %d failed; audio disk?\n",
printk743drivers/cdrom/optcd.cprintk("optcd: read block %d failed; Giving up\n",
printk767drivers/cdrom/optcd.cprintk("optcd: %ld times in previous state\n",
printk769drivers/cdrom/optcd.cprintk("optcd: state %d\n", opt_state);
printk797drivers/cdrom/optcd.cprintk((st & ST_DOOR_OPEN)
printk822drivers/cdrom/optcd.cprintk("optcd: reading %x:%x.%x %x:%x.%x\n",
printk829drivers/cdrom/optcd.cprintk("optcd: opt_next_bn:%d opt_buf_in:%d opt_buf_out:%d opt_buf_bn:%d\n",
printk845drivers/cdrom/optcd.cprintk("optcd: st:%x\n", st);
printk848drivers/cdrom/optcd.cprintk("timeout cnt: %d\n", optTimeout);
printk854drivers/cdrom/optcd.cprintk("optcd: read block %d failed; audio disk?\n",
printk858drivers/cdrom/optcd.cprintk("optcd: read block %d failed; Giving up\n",
printk881drivers/cdrom/optcd.cprintk("optcd: warning - try to read 0 frames\n");
printk885drivers/cdrom/optcd.cprintk("read_count:%d CURRENT->nr_sectors:%ld opt_buf_in:%d\n",
printk889drivers/cdrom/optcd.cprintk("opt_transfer_is_active:%x\n",
printk900drivers/cdrom/optcd.cprintk("OPT_S_DATA; ---I've read data- read_count: %d\n",
printk902drivers/cdrom/optcd.cprintk("opt_next_bn:%d  opt_buf_in:%d opt_buf_out:%d  opt_buf_bn:%d\n",
printk942drivers/cdrom/optcd.cprintk("optcd: discard data=%x frames\n",
printk977drivers/cdrom/optcd.cprintk("optcd: invalid state %d\n", opt_state);
printk983drivers/cdrom/optcd.cprintk("optcd: timeout in state %d\n", opt_state);
printk995drivers/cdrom/optcd.cprintk("optcd: do_optcd_request(%ld+%ld)\n",
printk1026drivers/cdrom/optcd.cprintk("opt_next_bn:%d  opt_buf_in:%d opt_buf_out:%d  opt_buf_bn:%d\n",
printk1028drivers/cdrom/optcd.cprintk("optcd: do_optcd_request ends\n");
printk1040drivers/cdrom/optcd.cprintk("optcd: starting opt_ioctl, command 0x%x\n", cmd);
printk1111drivers/cdrom/optcd.cprintk("optcd: play %02x:%02x.%02x to %02x:%02x.%02x\n",
printk1269drivers/cdrom/optcd.cprintk("optcd: COMREAD status 0x%x\n", st);
printk1283drivers/cdrom/optcd.cprintk("optcd: exiting opt_ioctl\n");
printk1294drivers/cdrom/optcd.cprintk("optcd: starting opt_open\n");
printk1309drivers/cdrom/optcd.cprintk("optcd: no disk or door open\n");
printk1319drivers/cdrom/optcd.cprintk("optcd: exiting opt_open\n");
printk1327drivers/cdrom/optcd.cprintk("optcd: executing opt_release\n");
printk1328drivers/cdrom/optcd.cprintk("inode: %p, inode -> i_rdev: 0x%x, file: %p\n",
printk1361drivers/cdrom/optcd.cprintk("optcd: Device %s detected\n", devname);
printk1401drivers/cdrom/optcd.cprintk("optcd: no Optics Storage CDROM Initialization\n");
printk1405drivers/cdrom/optcd.cprintk("optcd: conflict, I/O port 0x%x already used\n",
printk1416drivers/cdrom/optcd.cprintk( "No ISP16 cdrom interface found.\n" );
printk1420drivers/cdrom/optcd.cprintk( "ISP16 cdrom interface (%s optional IDE) detected.\n",
printk1426drivers/cdrom/optcd.cprintk( "ISP16 cdrom interface has not been properly configured.\n" );
printk1433drivers/cdrom/optcd.cprintk("optcd: drive at 0x%x not ready\n", optcd_port);
printk1437drivers/cdrom/optcd.cprintk("optcd: unknown drive detected; aborting\n");
printk1441drivers/cdrom/optcd.cprintk("optcd: cannot init double speed mode\n");
printk1446drivers/cdrom/optcd.cprintk("optcd: unable to get major %d\n", MAJOR_NR);
printk1453drivers/cdrom/optcd.cprintk("optcd: 8000 AT CDROM at 0x%x\n", optcd_port);
printk1465drivers/cdrom/optcd.cprintk("optcd: what's that: can't unregister\n");
printk1469drivers/cdrom/optcd.cprintk("optcd: module released.\n");
printk1594drivers/cdrom/optcd.cprintk( "Mitsumi cdrom drive has no dma support.\n" );
printk1602drivers/cdrom/optcd.cprintk( "Base address 0x%03X not supported by cdrom interface on ISP16.\n", base );
printk1608drivers/cdrom/optcd.cprintk( "Irq 5 shouldn't be used by cdrom interface on ISP16,"
printk1612drivers/cdrom/optcd.cprintk( "Irq 7 shouldn't be used by cdrom interface on ISP16,"
printk1620drivers/cdrom/optcd.cprintk( "Irq %d not supported by cdrom interface on ISP16.\n", irq );
printk1625drivers/cdrom/optcd.ccase 1: printk( "Dma 1 cannot be used by cdrom interface on ISP16,"
printk1633drivers/cdrom/optcd.cprintk( "Dma %d not supported by cdrom interface on ISP16.\n", dma );
printk1641drivers/cdrom/optcd.cprintk( "Drive type (code 0x%02X) not supported by cdrom"
printk714drivers/cdrom/sbpcd.cprintk(buf);
printk2861drivers/cdrom/sbpcd.cfor (i=0;i<=1000;i++) printk(".");
printk256drivers/cdrom/sjcd.cprintk( "sjcd: send_cmd( 0x%x )\n", cmd );
printk269drivers/cdrom/sjcd.cprintk( "sjcd: send_1_cmd( 0x%x, 0x%x )\n", cmd, a );
printk284drivers/cdrom/sjcd.cprintk( "sjcd: send_4_cmd( 0x%x )\n", cmd );
printk301drivers/cdrom/sjcd.cprintk( "sjcd: send_long_cmd( 0x%x )\n", cmd );
printk368drivers/cdrom/sjcd.cprintk( "sjcd: status %02x.%02x loaded.\n",
printk432drivers/cdrom/sjcd.cprintk( "sjcd: Error Wait For Status.\n" );
printk440drivers/cdrom/sjcd.cprintk( "sjcd: receive_status\n" );
printk448drivers/cdrom/sjcd.cprintk( "sjcd: long wait for status\n" );
printk451drivers/cdrom/sjcd.cprintk( "sjcd: Timeout when read status.\n" );
printk462drivers/cdrom/sjcd.cprintk( "sjcd: get_status\n" );
printk473drivers/cdrom/sjcd.cprintk( "sjcd_disk_change( 0x%x )\n", full_dev );
printk476drivers/cdrom/sjcd.cprintk( "sjcd: request error: invalid device minor.\n" );
printk496drivers/cdrom/sjcd.cprintk( "sjcd: update toc:\n" );
printk510drivers/cdrom/sjcd.cprintk( "cannot load status.\n" );
printk515drivers/cdrom/sjcd.cprintk( "no disk in drive\n" );
printk521drivers/cdrom/sjcd.cprintk( "cannot load response about TOC start.\n" );
printk526drivers/cdrom/sjcd.cprintk( "get first failed\n" );
printk530drivers/cdrom/sjcd.cprintk( "TOC start 0x%02x ", sjcd_first_track_no );
printk539drivers/cdrom/sjcd.cprintk( "cannot load status.\n" );
printk544drivers/cdrom/sjcd.cprintk( "no disk in drive\n" );
printk550drivers/cdrom/sjcd.cprintk( "cannot load response about TOC finish.\n" );
printk555drivers/cdrom/sjcd.cprintk( "get last failed\n" );
printk559drivers/cdrom/sjcd.cprintk( "TOC finish 0x%02x ", sjcd_last_track_no );
printk569drivers/cdrom/sjcd.cprintk( "cannot load status.\n" );
printk574drivers/cdrom/sjcd.cprintk( "no disk in drive\n" );
printk581drivers/cdrom/sjcd.cprintk( "cannot load info for %d track\n", i );
printk585drivers/cdrom/sjcd.cprintk( "get info %d failed\n", i );
printk597drivers/cdrom/sjcd.cprintk( "cannot load status.\n" );
printk602drivers/cdrom/sjcd.cprintk( "no disk in drive\n" );
printk608drivers/cdrom/sjcd.cprintk( "cannot load response about disk size.\n" );
printk615drivers/cdrom/sjcd.cprintk( "get size failed\n" );
printk619drivers/cdrom/sjcd.cprintk( "(%02x:%02x.%02x)\n", sjcd_disk_length.min,
printk631drivers/cdrom/sjcd.cprintk( "sjcd: load sub q\n" );
printk680drivers/cdrom/sjcd.cprintk( "sjcd: tray_close\n" );
printk688drivers/cdrom/sjcd.cprintk( "sjcd: tray_lock\n" );
printk696drivers/cdrom/sjcd.cprintk( "sjcd: tray_unlock\n" );
printk704drivers/cdrom/sjcd.cprintk( "sjcd: tray_open\n" );
printk716drivers/cdrom/sjcd.cprintk( "sjcd:ioctl\n" );
printk728drivers/cdrom/sjcd.cprintk( "sjcd: ioctl: start\n" );
printk735drivers/cdrom/sjcd.cprintk( "sjcd: ioctl: stop\n" );
printk746drivers/cdrom/sjcd.cprintk( "sjcd: ioctl: pause\n" );
printk763drivers/cdrom/sjcd.cprintk( "sjcd: ioctl: resume\n" );
printk782drivers/cdrom/sjcd.cprintk( "sjcd: ioctl: playtrkind\n" );
printk808drivers/cdrom/sjcd.cprintk( "sjcd: ioctl: playmsf\n" );
printk837drivers/cdrom/sjcd.cprintk( "sjcd: ioctl: readtocheader\n" );
printk850drivers/cdrom/sjcd.cprintk( "sjcd: ioctl: readtocentry\n" );
printk885drivers/cdrom/sjcd.cprintk( "sjcd: ioctl: subchnl\n" );
printk922drivers/cdrom/sjcd.cprintk( "sjcd: ioctl: volctrl\n" );
printk938drivers/cdrom/sjcd.cprintk( "sjcd: ioctl: eject\n" );
printk952drivers/cdrom/sjcd.cprintk( "sjcd: ioctl: statistic\n" );
printk985drivers/cdrom/sjcd.cprintk( "sjcd: transfer:\n" );
printk1004drivers/cdrom/sjcd.cprintk( "copy out\n" );
printk1017drivers/cdrom/sjcd.cprintk( "sjcd: transfer: done\n" );
printk1037drivers/cdrom/sjcd.cprintk( "SJCD_S_IDLE\n" );
printk1051drivers/cdrom/sjcd.cprintk( "SJCD_S_START: goto SJCD_S_%s mode\n",
printk1064drivers/cdrom/sjcd.cprintk( "SJCD_S_MODE: pre-cmd failed: goto to SJCD_S_STOP mode\n" );
printk1074drivers/cdrom/sjcd.cprintk( "SJCD_S_MODE: goto SJCD_S_READ mode\n" );
printk1090drivers/cdrom/sjcd.cprintk( "SJCD_S_READ: pre-cmd failed: goto to SJCD_S_STOP mode\n" );
printk1097drivers/cdrom/sjcd.cprintk( "SJCD_S_READ: no disk: goto to SJCD_S_STOP mode\n" );
printk1108drivers/cdrom/sjcd.cprintk( "SJCD_S_READ: load failed: goto to SJCD_S_STOP mode\n" );
printk1115drivers/cdrom/sjcd.cprintk( "SJCD_S_READ: mode failed: goto to SJCD_S_STOP mode\n" );
printk1130drivers/cdrom/sjcd.cprintk( "---reading msf-address %x:%x:%x  %x:%x:%x\n",
printk1133drivers/cdrom/sjcd.cprintk( "sjcd_next_bn:%x buf_in:%x buf_out:%x buf_bn:%x\n", \
printk1141drivers/cdrom/sjcd.cprintk( "SJCD_S_READ: go to SJCD_S_DATA mode\n" );
printk1145drivers/cdrom/sjcd.cprintk( "SJCD_S_READ: nothing to read: go to SJCD_S_STOP mode\n" );
printk1162drivers/cdrom/sjcd.cprintk( "SJCD_S_DATA: status = 0x%02x\n", stat );
printk1173drivers/cdrom/sjcd.cprintk( "sjcd: read block %d failed, maybe audio disk? Giving up\n",
printk1178drivers/cdrom/sjcd.cprintk( "SJCD_S_DATA: pre-cmd failed: go to SJCD_S_STOP mode\n" );
printk1185drivers/cdrom/sjcd.cprintk( "SJCD_S_DATA: no disk: go to SJCD_S_STOP mode\n" );
printk1200drivers/cdrom/sjcd.cprintk( "SJCD_S_DATA: nothing to read: go to SJCD_S_STOP mode\n" );
printk1201drivers/cdrom/sjcd.cprintk( " ... all the date would be discarded\n" );
printk1214drivers/cdrom/sjcd.cprintk( "SJCD_S_DATA: next_bn=%d, buf_in=%d, buf_out=%d, buf_bn=%d\n",
printk1244drivers/cdrom/sjcd.cprintk( "SJCD_S_DATA: can't read: go to SJCD_S_STOP mode\n" );
printk1277drivers/cdrom/sjcd.cprintk( "SJCD_S_STOP: status = 0x%02x\n", stat );
printk1282drivers/cdrom/sjcd.cprintk( "SJCD_S_STOP: discard data\n" );
printk1308drivers/cdrom/sjcd.cprintk( "sjcd_poll: invalid state %d\n", sjcd_transfer_state );
printk1313drivers/cdrom/sjcd.cprintk( "sjcd: timeout in state %d\n", sjcd_transfer_state );
printk1329drivers/cdrom/sjcd.cprintk( "sjcd: do_sjcd_request(%ld+%ld)\n",
printk1347drivers/cdrom/sjcd.cprintk( "sjcd: transfer: discard\n" );
printk1360drivers/cdrom/sjcd.cprintk( "sjcd_next_bn:%x sjcd_buf_in:%x sjcd_buf_out:%x sjcd_buf_bn:%x\n",
printk1362drivers/cdrom/sjcd.cprintk( "do_sjcd_request ends\n" );
printk1399drivers/cdrom/sjcd.cprintk( "sjcd: open: timed out when check status.\n" );
printk1404drivers/cdrom/sjcd.cprintk("sjcd: open: no disk in drive\n");
printk1409drivers/cdrom/sjcd.cprintk("sjcd: open: close the tray\n");
printk1414drivers/cdrom/sjcd.cprintk("sjcd: open: tray close attempt failed\n");
printk1426drivers/cdrom/sjcd.cprintk("sjcd: open: tray lock attempt failed\n");
printk1431drivers/cdrom/sjcd.cprintk( "sjcd: open: done\n" );
printk1446drivers/cdrom/sjcd.cprintk( "sjcd: release\n" );
printk1456drivers/cdrom/sjcd.cprintk("sjcd: release: tray unlock attempt failed.\n");
printk1463drivers/cdrom/sjcd.cprintk("sjcd: release: tray unload attempt failed.\n");
printk1507drivers/cdrom/sjcd.cprintk( "No ISP16 cdrom interface found.\n" );
printk1511drivers/cdrom/sjcd.cprintk( "ISP16 cdrom interface (with OPTi 82C92%s chip) detected.\n",
printk1514drivers/cdrom/sjcd.cprintk( "ISP16 sound configuration.\n" );
printk1520drivers/cdrom/sjcd.cprintk( "ISP16 cdrom interface has not been properly configured.\n" );
printk1526drivers/cdrom/sjcd.cprintk( "sjcd=0x%x,%d: ", sjcd_port, sjcd_irq );
printk1530drivers/cdrom/sjcd.cprintk( "Unable to get major %d for Sanyo CD-ROM\n", MAJOR_NR );
printk1538drivers/cdrom/sjcd.cprintk( "Init failed, I/O port (%X) is already in use\n",
printk1547drivers/cdrom/sjcd.cprintk( "Sanyo: Resetting: " );
printk1556drivers/cdrom/sjcd.cif ( (i % 100) == 0 ) printk( "." );
printk1560drivers/cdrom/sjcd.cprintk( " reset failed, no drive found.\n" );
printk1562drivers/cdrom/sjcd.c} else printk( "\n" );
printk1567drivers/cdrom/sjcd.cprintk( "Sanyo: Getting version: " );
printk1576drivers/cdrom/sjcd.cif ( (i % 100) == 0 ) printk( "." );
printk1580drivers/cdrom/sjcd.cprintk( " get version failed, no drive found.\n" );
printk1585drivers/cdrom/sjcd.cprintk( " %1x.%02x\n", ( int )sjcd_version.major,
printk1588drivers/cdrom/sjcd.cprintk( " read version failed, no drive found.\n" );
printk1596drivers/cdrom/sjcd.cprintk( "Sanyo: Getting status: " );
printk1605drivers/cdrom/sjcd.cif ( (i % 100) == 0 ) printk( "." );
printk1609drivers/cdrom/sjcd.cprintk( " get status failed, no drive found.\n" );
printk1611drivers/cdrom/sjcd.c} else printk( "\n" );
printk1614drivers/cdrom/sjcd.cprintk( "SANYO CDR-H94A: Status: port=0x%x, irq=%d, dma=%d.\n",
printk1630drivers/cdrom/sjcd.cprintk( "sjcd: module: can not unregister device.\n" );
printk1633drivers/cdrom/sjcd.cprintk( "sjcd: module: removed.\n");
printk1759drivers/cdrom/sjcd.cprintk( "Mitsumi cdrom drive has no dma support.\n" );
printk1767drivers/cdrom/sjcd.cprintk( "Base address 0x%03X not supported by cdrom interface on ISP16.\n", base );
printk1773drivers/cdrom/sjcd.cprintk( "Irq 5 shouldn't be used by cdrom interface on ISP16,"
printk1777drivers/cdrom/sjcd.cprintk( "Irq 7 shouldn't be used by cdrom interface on ISP16,"
printk1785drivers/cdrom/sjcd.cprintk( "Irq %d not supported by cdrom interface on ISP16.\n", irq );
printk1790drivers/cdrom/sjcd.ccase 1: printk( "Dma 1 cannot be used by cdrom interface on ISP16,"
printk1798drivers/cdrom/sjcd.cprintk( "Dma %d not supported by cdrom interface on ISP16.\n", dma );
printk1806drivers/cdrom/sjcd.cprintk( "Drive type (code 0x%02X) not supported by cdrom"
printk1869drivers/cdrom/sjcd.cprintk( "Strange MediaMagic, but\n" );
printk1872drivers/cdrom/sjcd.cprintk( "Conf:" );
printk1881drivers/cdrom/sjcd.cprintk( " %02X", saved );
printk1883drivers/cdrom/sjcd.cprintk( "\n" );
printk275drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " request error: invalid device.\n");
printk320drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME
printk376drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME
printk385drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " read_result_reg: TIME OUT!\n");
printk407drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME ": read_exec_status: read 0x%x 0x%x\n",
printk453drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME ": check_drive_status() got 0x%x\n", status);
printk467drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " error: drive busy\n");
printk470drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " error: eject in progress\n");
printk477drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " notice: reset occurred or disc changed\n");
printk491drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " error: drive busy (ATN=0x%x)\n", ATN);
printk500drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME
printk546drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME ": do_sony_cmd %x: %x %x\n",
printk880drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " No room to read from CD\n");
printk882drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " Read error: 0x%.2x\n",
printk896drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME
printk985drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " error 0x%.2x, %d (read_subcode)\n",
printk1094drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMSTART)\n",
printk1114drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMSTOP)\n",
printk1124drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMPAUSE)\n",
printk1160drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMRESUME)\n",
printk1189drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMPLAYMSF)\n",
printk1322drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMPLAYTRKIND)\n",
printk1324drivers/cdrom/sonycd535.cprintk("... Params: %x %x %x %x %x %x %x\n",
printk1353drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMVOLCTRL)\n",
printk1369drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMEJECT)\n",
printk1401drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " error 0x%.2x (cdu_open, spin up)\n",
printk1513drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME ": probing base address %03X\n",
printk1517drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME ": my base address is not free!\n");
printk1547drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME
printk1568drivers/cdrom/sonycd535.cprintk("Unable to grab IRQ%d for the " CDU535_MESSAGE_NAME
printk1580drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME " I/F CDROM : %8.8s %16.16s %4.4s",
printk1584drivers/cdrom/sonycd535.cprintk("  base address %03X, ", sony535_cd_base_io);
printk1586drivers/cdrom/sonycd535.cprintk("IRQ%d, ", tmp_irq);
printk1587drivers/cdrom/sonycd535.cprintk("using %d byte buffer\n", sony_buffer_size);
printk1590drivers/cdrom/sonycd535.cprintk("Unable to get major %d for %s\n",
printk1631drivers/cdrom/sonycd535.cprintk("Did not find a " CDU535_MESSAGE_NAME " drive\n");
printk1660drivers/cdrom/sonycd535.cprintk(CDU535_MESSAGE_NAME
printk1683drivers/cdrom/sonycd535.cprintk("Uh oh, couldn't unregister " CDU535_HANDLE "\n");
printk1685drivers/cdrom/sonycd535.cprintk(CDU535_HANDLE " module released\n");
printk439drivers/char/apm_bios.cprintk("apm_bios: %s: %s\n", str, error_table[i].msg);
printk441drivers/char/apm_bios.cprintk("apm_bios: %s: unknown error code %#2.2x\n", str, err);
printk665drivers/char/apm_bios.cprintk("APM BIOS received %s notify\n",
printk668drivers/char/apm_bios.cprintk("APM BIOS received unknown event 0x%02x\n",
printk734drivers/char/apm_bios.cprintk("apm_bios: %s passed bad filp", func);
printk855drivers/char/apm_bios.cprintk("apm_bios: filp not in user list");
printk868drivers/char/apm_bios.cprintk("apm_bios: cannot allocate struct of size %d bytes",
printk961drivers/char/apm_bios.cprintk("APM BIOS not found.\n");
printk964drivers/char/apm_bios.cprintk("APM BIOS version %c.%c Flags 0x%02x (Driver version %s)\n",
printk970drivers/char/apm_bios.cprintk("    No 32 bit BIOS support\n");
printk981drivers/char/apm_bios.cprintk("    Entry %x:%lx cseg16 %x dseg %x",
printk985drivers/char/apm_bios.cprintk(" cseg len %x, dseg len %x",
printk987drivers/char/apm_bios.cprintk("\n");
printk1015drivers/char/apm_bios.cprintk( "    Connection version %d.%d\n",
printk1024drivers/char/apm_bios.cprintk("    Power status not available\n");
printk1039drivers/char/apm_bios.cprintk("    AC %s, battery status %s, battery life ",
printk1042drivers/char/apm_bios.cprintk("unknown\n");
printk1044drivers/char/apm_bios.cprintk("%d%%\n", cx & 0xff);
printk1046drivers/char/apm_bios.cprintk("    battery flag 0x%02x, battery life ",
printk1049drivers/char/apm_bios.cprintk("unknown\n");
printk1051drivers/char/apm_bios.cprintk("%d %s\n", dx & 0x7fff,
printk1078drivers/char/apm_bios.cprintk("APM BIOS: Cannot allocate major device number\n");
printk210drivers/char/atixlmouse.cprintk("\nATI Inport ");
printk224drivers/char/atixlmouse.cprintk("Bus mouse detected and installed.\n");
printk271drivers/char/busmouse.cprintk("Logitech bus mouse detected, using IRQ %d.\n",
printk1373drivers/char/console.cprintk("con_write: tty %d not allocated\n", currcons+1);
printk1861drivers/char/console.cprintk("console_print: tty %d not allocated ??\n", currcons+1);
printk2052drivers/char/console.cprintk("Console: %ld point font, %ld scans\n",
printk2056drivers/char/console.cprintk("Console: %s %s %ldx%ld, %d virtual console%s (max %d)\n",
printk2135drivers/char/console.cprintk("unblank_screen: tty %d not allocated ??\n", fg_console+1);
printk2187drivers/char/console.cprintk("update_screen: tty %d not allocated ??\n", new_console+1);
printk440drivers/char/cyclades.cprintk(badinfo, kdevname(device), routine);
printk446drivers/char/cyclades.cprintk(badrange, kdevname(device), routine);
printk451drivers/char/cyclades.cprintk(badmagic, kdevname(device), routine);
printk530drivers/char/cyclades.cprintk("cy_stop ttyC%d\n", info->line); /* */
printk562drivers/char/cyclades.cprintk("cy_start ttyC%d\n", info->line); /* */
printk1216drivers/char/cyclades.cprintk("startup card %d, chip %d, channel %d, base_addr %lx",
printk1235drivers/char/cyclades.cprintk("cyc: %d: raising DTR\n", __LINE__);
printk1236drivers/char/cyclades.cprintk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
printk1250drivers/char/cyclades.cprintk(" done\n");
printk1301drivers/char/cyclades.cprintk("shutdown card %d, chip %d, channel %d, base_addr %lx\n",
printk1324drivers/char/cyclades.cprintk("cyc: %d: dropping DTR\n", __LINE__);
printk1325drivers/char/cyclades.cprintk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
printk1339drivers/char/cyclades.cprintk(" done\n");
printk1521drivers/char/cyclades.cprintk("cyc: %d: dropping DTR\n", __LINE__);
printk1522drivers/char/cyclades.cprintk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
printk1527drivers/char/cyclades.cprintk("cyc: %d: raising DTR\n", __LINE__);
printk1528drivers/char/cyclades.cprintk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
printk1548drivers/char/cyclades.cprintk("cy_put_char ttyC%d\n", info->line);
printk1579drivers/char/cyclades.cprintk("cy_flush_chars ttyC%d\n", info->line); /* */
printk1619drivers/char/cyclades.cprintk("cy_write ttyC%d\n", info->line); /* */
printk1673drivers/char/cyclades.cprintk("cy_write_room ttyC%d\n", info->line); /* */
printk1691drivers/char/cyclades.cprintk("cy_chars_in_buffer ttyC%d %d\n", info->line, info->xmit_cnt); /* */
printk1708drivers/char/cyclades.cprintk("cy_flush_buffer ttyC%d\n", info->line); /* */
printk1738drivers/char/cyclades.cprintk("throttle %s: %d....\n", _tty_name(tty, buf),
printk1740drivers/char/cyclades.cprintk("cy_throttle ttyC%d\n", info->line);
printk1780drivers/char/cyclades.cprintk("throttle %s: %d....\n", _tty_name(tty, buf),
printk1782drivers/char/cyclades.cprintk("cy_unthrottle ttyC%d\n", info->line);
printk1941drivers/char/cyclades.cprintk("cyc: %d: raising DTR\n", __LINE__);
printk1942drivers/char/cyclades.cprintk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
printk1960drivers/char/cyclades.cprintk("cyc: %d: dropping DTR\n", __LINE__);
printk1961drivers/char/cyclades.cprintk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
printk1984drivers/char/cyclades.cprintk("cyc: %d: raising DTR\n", __LINE__);
printk1985drivers/char/cyclades.cprintk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
printk1994drivers/char/cyclades.cprintk("cyc: %d: dropping DTR\n", __LINE__);
printk1995drivers/char/cyclades.cprintk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
printk2145drivers/char/cyclades.cprintk("cy_ioctl ttyC%d, cmd = %x arg = %lx\n", info->line, cmd, arg); /* */
printk2272drivers/char/cyclades.cprintk("cy_ioctl done\n");
printk2287drivers/char/cyclades.cprintk("cy_set_termios ttyC%d\n", info->line);
printk2317drivers/char/cyclades.cprintk("cy_close ttyC%d\n", info->line);
printk2325drivers/char/cyclades.cprintk("cy_close ttyC%d, count = %d\n", info->line, info->count);
printk2344drivers/char/cyclades.cprintk("cy_close: bad serial port count; tty->count is 1, "
printk2349drivers/char/cyclades.cprintk("cyc: %d(%d): decrementing count to %d\n", __LINE__, current->pid, info->count - 1);
printk2353drivers/char/cyclades.cprintk("cyc: %d: setting count to 0\n", __LINE__);
printk2394drivers/char/cyclades.cprintk("cy_close done\n");
printk2411drivers/char/cyclades.cprintk("cy_hangup ttyC%d\n", info->line); /* */
printk2421drivers/char/cyclades.cprintk("cyc: %d(%d): setting count to 0\n", __LINE__, current->pid);
printk2504drivers/char/cyclades.cprintk("block_til_ready before block: ttyC%d, count = %d\n",
printk2509drivers/char/cyclades.cprintk("cyc: %d(%d): decrementing count to %d\n", __LINE__, current->pid, info->count);
printk2528drivers/char/cyclades.cprintk("cyc: %d: raising DTR\n", __LINE__);
printk2529drivers/char/cyclades.cprintk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1<<index], base_addr[CyMSVR2<<index]);
printk2559drivers/char/cyclades.cprintk("block_til_ready blocking: ttyC%d, count = %d\n",
printk2569drivers/char/cyclades.cprintk("cyc: %d(%d): incrementing count to %d\n", __LINE__, current->pid, info->count);
printk2574drivers/char/cyclades.cprintk("block_til_ready after blocking: ttyC%d, count = %d\n",
printk2603drivers/char/cyclades.cprintk("cy_open ttyC%d\n", info->line); /* */
printk2609drivers/char/cyclades.cprintk("cy_open ttyC%d, count = %d\n", info->line, info->count);/**/
printk2613drivers/char/cyclades.cprintk("cyc: %d(%d): incrementing count to %d\n", __LINE__, current->pid, info->count);
printk2642drivers/char/cyclades.cprintk("cy_open returning after block_til_ready with %d\n",
printk2652drivers/char/cyclades.cprintk("cy_open done\n");/**/
printk2676drivers/char/cyclades.cprintk("Cyclom driver %s\n",rcsid);
printk2887drivers/char/cyclades.cprintk("cyc: %d: setting count to 0\n", __LINE__);
printk2923drivers/char/cyclades.cprintk("Couldn't unregister Cyclom callout driver\n");
printk2925drivers/char/cyclades.cprintk("Couldn't unregister Cyclom serial driver\n");
printk2967drivers/char/cyclades.cprintk("Cyclom-Y/ISA found at 0x%x but the IRQ could not be detected.\n",
printk2973drivers/char/cyclades.cprintk("Cyclom-Y/ISA found at 0x%x but no more channel structures are available.\n",
printk2982drivers/char/cyclades.cprintk("Cyclom-Y/ISA found at 0x%x but no more card structures are available.\n",
printk2990drivers/char/cyclades.cprintk("Cyclom-Y/ISA found at 0x%x but could not allocate interrupt IRQ#%d.\n",
printk3005drivers/char/cyclades.cprintk("Cyclom-Y/ISA #%d: 0x%x-0x%x, IRQ%d, %d channels starting from port %d.\n",
printk3031drivers/char/cyclades.cprintk ("Kernel without PCI support.\n");
printk3059drivers/char/cyclades.cprintk("Cyclom-Y PCI host card with no Serial-Modules at 0x%x.\n",
printk3064drivers/char/cyclades.cprintk("Cyclom-Y/PCI found at 0x%x but no more channel structures are available.\n",
printk3069drivers/char/cyclades.cprintk("Cyclom-Ye/PCI #%d (bus=0x0%x, pci_id=0x%x, rev_id=%d).\n",
printk3071drivers/char/cyclades.cprintk("Cyclom-Ye/PCI: found at 0x%x, IRQ%d, ioaddr = 0x%lx.\n",
printk3079drivers/char/cyclades.cprintk("Cyclom-Y/PCI found at 0x%x but no more card structures are available.\n",
printk3087drivers/char/cyclades.cprintk("Cyclom-Y/PCI found at 0x%x but could not allocate interrupt IRQ%d.\n",
printk3105drivers/char/cyclades.cprintk("Cyclom-Y/PCI #%d: 0x%x-0x%x, IRQ%d, %d channels starting from port %d.\n",
printk3132drivers/char/cyclades.cprintk("  card %d, chip %d, channel %d\n", card, chip, channel);/**/
printk3134drivers/char/cyclades.cprintk(" cy_card\n");
printk3135drivers/char/cyclades.cprintk("  irq base_addr num_chips first_line = %d %lx %d %d\n",
printk3139drivers/char/cyclades.cprintk(" cy_port\n");
printk3140drivers/char/cyclades.cprintk("  card line flags = %d %d %x\n",
printk3142drivers/char/cyclades.cprintk("  *tty read_status_mask timeout xmit_fifo_size = %lx %x %x %x\n",
printk3145drivers/char/cyclades.cprintk("  cor1,cor2,cor3,cor4,cor5 = %x %x %x %x %x\n",
printk3147drivers/char/cyclades.cprintk("  tbpr,tco,rbpr,rco = %d %d %d %d\n",
printk3149drivers/char/cyclades.cprintk("  close_delay event count = %d %d %d\n",
printk3151drivers/char/cyclades.cprintk("  x_char blocked_open = %x %x\n",
printk3153drivers/char/cyclades.cprintk("  session pgrp open_wait = %lx %lx %lx\n",
printk3164drivers/char/cyclades.cprintk(" CyGFRCR %x\n", base_addr[CyGFRCR<<index]);
printk3165drivers/char/cyclades.cprintk(" CyCAR %x\n", base_addr[CyCAR<<index]);
printk3166drivers/char/cyclades.cprintk(" CyGCR %x\n", base_addr[CyGCR<<index]);
printk3167drivers/char/cyclades.cprintk(" CySVRR %x\n", base_addr[CySVRR<<index]);
printk3168drivers/char/cyclades.cprintk(" CyRICR %x\n", base_addr[CyRICR<<index]);
printk3169drivers/char/cyclades.cprintk(" CyTICR %x\n", base_addr[CyTICR<<index]);
printk3170drivers/char/cyclades.cprintk(" CyMICR %x\n", base_addr[CyMICR<<index]);
printk3171drivers/char/cyclades.cprintk(" CyRIR %x\n", base_addr[CyRIR<<index]);
printk3172drivers/char/cyclades.cprintk(" CyTIR %x\n", base_addr[CyTIR<<index]);
printk3173drivers/char/cyclades.cprintk(" CyMIR %x\n", base_addr[CyMIR<<index]);
printk3174drivers/char/cyclades.cprintk(" CyPPR %x\n", base_addr[CyPPR<<index]);
printk3180drivers/char/cyclades.cprintk(" CyRIVR %x\n", base_addr[CyRIVR<<index]);
printk3181drivers/char/cyclades.cprintk(" CyTIVR %x\n", base_addr[CyTIVR<<index]);
printk3182drivers/char/cyclades.cprintk(" CyMIVR %x\n", base_addr[CyMIVR<<index]);
printk3183drivers/char/cyclades.cprintk(" CyMISR %x\n", base_addr[CyMISR<<index]);
printk3187drivers/char/cyclades.cprintk(" CyCCR %x\n", base_addr[CyCCR<<index]);
printk3188drivers/char/cyclades.cprintk(" CySRER %x\n", base_addr[CySRER<<index]);
printk3189drivers/char/cyclades.cprintk(" CyCOR1 %x\n", base_addr[CyCOR1<<index]);
printk3190drivers/char/cyclades.cprintk(" CyCOR2 %x\n", base_addr[CyCOR2<<index]);
printk3191drivers/char/cyclades.cprintk(" CyCOR3 %x\n", base_addr[CyCOR3<<index]);
printk3192drivers/char/cyclades.cprintk(" CyCOR4 %x\n", base_addr[CyCOR4<<index]);
printk3193drivers/char/cyclades.cprintk(" CyCOR5 %x\n", base_addr[CyCOR5<<index]);
printk3194drivers/char/cyclades.cprintk(" CyCCSR %x\n", base_addr[CyCCSR<<index]);
printk3195drivers/char/cyclades.cprintk(" CyRDCR %x\n", base_addr[CyRDCR<<index]);
printk3196drivers/char/cyclades.cprintk(" CySCHR1 %x\n", base_addr[CySCHR1<<index]);
printk3197drivers/char/cyclades.cprintk(" CySCHR2 %x\n", base_addr[CySCHR2<<index]);
printk3198drivers/char/cyclades.cprintk(" CySCHR3 %x\n", base_addr[CySCHR3<<index]);
printk3199drivers/char/cyclades.cprintk(" CySCHR4 %x\n", base_addr[CySCHR4<<index]);
printk3200drivers/char/cyclades.cprintk(" CySCRL %x\n", base_addr[CySCRL<<index]);
printk3201drivers/char/cyclades.cprintk(" CySCRH %x\n", base_addr[CySCRH<<index]);
printk3202drivers/char/cyclades.cprintk(" CyLNC %x\n", base_addr[CyLNC<<index]);
printk3203drivers/char/cyclades.cprintk(" CyMCOR1 %x\n", base_addr[CyMCOR1<<index]);
printk3204drivers/char/cyclades.cprintk(" CyMCOR2 %x\n", base_addr[CyMCOR2<<index]);
printk3205drivers/char/cyclades.cprintk(" CyRTPR %x\n", base_addr[CyRTPR<<index]);
printk3206drivers/char/cyclades.cprintk(" CyMSVR1 %x\n", base_addr[CyMSVR1<<index]);
printk3207drivers/char/cyclades.cprintk(" CyMSVR2 %x\n", base_addr[CyMSVR2<<index]);
printk3208drivers/char/cyclades.cprintk(" CyRBPR %x\n", base_addr[CyRBPR<<index]);
printk3209drivers/char/cyclades.cprintk(" CyRCOR %x\n", base_addr[CyRCOR<<index]);
printk3210drivers/char/cyclades.cprintk(" CyTBPR %x\n", base_addr[CyTBPR<<index]);
printk3211drivers/char/cyclades.cprintk(" CyTCOR %x\n", base_addr[CyTCOR<<index]);
printk716drivers/char/istallion.cprintk("init_module()\n");
printk737drivers/char/istallion.cprintk("cleanup_module()\n");
printk740drivers/char/istallion.cprintk("Unloading %s: version %s\n", stli_drvname, stli_drvversion);
printk757drivers/char/istallion.cprintk("STALLION: failed to un-register tty driver, errno=%d,%d\n", -i, -j);
printk762drivers/char/istallion.cprintk("STALLION: failed to un-register serial memory device, errno=%d\n", -i);
printk822drivers/char/istallion.cprintk("stli_open(tty=%x,filp=%x): device=%x\n", (int) tty, (int) filp, tty->device);
printk948drivers/char/istallion.cprintk("stli_close(tty=%x,filp=%x)\n", (int) tty, (int) filp);
printk1035drivers/char/istallion.cprintk("stli_initopen(brdp=%x,portp=%x)\n", (int) brdp, (int) portp);
printk1084drivers/char/istallion.cprintk("stli_rawopen(brdp=%x,portp=%x,arg=%x,wait=%d)\n", (int) brdp, (int) portp, (int) arg, wait);
printk1164drivers/char/istallion.cprintk("stli_rawclose(brdp=%x,portp=%x,arg=%x,wait=%d)\n", (int) brdp, (int) portp, (int) arg, wait);
printk1236drivers/char/istallion.cprintk("stli_cmdwait(brdp=%x,portp=%x,cmd=%x,arg=%x,size=%d,copyback=%d)\n", (int) brdp, (int) portp, (int) cmd, (int) arg, size, copyback);
printk1278drivers/char/istallion.cprintk("stli_setport(portp=%x)\n", (int) portp);
printk1304drivers/char/istallion.cprintk("stl_delay(len=%d)\n", len);
printk1326drivers/char/istallion.cprintk("stli_waitcarrier(brdp=%x,portp=%x,filp=%x)\n", (int) brdp, (int) portp, (int) filp);
printk1391drivers/char/istallion.cprintk("stli_write(tty=%x,from_user=%d,buf=%x,count=%d)\n", (int) tty, from_user, (int) buf, count);
printk1505drivers/char/istallion.cprintk("stli_putchar(tty=%x,ch=%x)\n", (int) tty, (int) ch);
printk1542drivers/char/istallion.cprintk("stli_flushchars(tty=%x)\n", (int) tty);
printk1631drivers/char/istallion.cprintk("stli_writeroom(tty=%x)\n", (int) tty);
printk1689drivers/char/istallion.cprintk("stli_charsinbuffer(tty=%x)\n", (int) tty);
printk1731drivers/char/istallion.cprintk("stli_getserial(portp=%x,sp=%x)\n", (int) portp, (int) sp);
printk1763drivers/char/istallion.cprintk("stli_setserial(portp=%x,sp=%x)\n", (int) portp, (int) sp);
printk1795drivers/char/istallion.cprintk("stli_ioctl(tty=%x,file=%x,cmd=%x,arg=%x)\n", (int) tty, (int) file, cmd, (int) arg);
printk1903drivers/char/istallion.cprintk("stli_settermios(tty=%x,old=%x)\n", (int) tty, (int) old);
printk1946drivers/char/istallion.cprintk("stli_throttle(tty=%x)\n", (int) tty);
printk1971drivers/char/istallion.cprintk("stli_unthrottle(tty=%x)\n", (int) tty);
printk1997drivers/char/istallion.cprintk("stli_stop(tty=%x)\n", (int) tty);
printk2029drivers/char/istallion.cprintk("stli_start(tty=%x)\n", (int) tty);
printk2064drivers/char/istallion.cprintk("stli_dohangup(portp=%x)\n", (int) arg);
printk2091drivers/char/istallion.cprintk("stli_hangup(tty=%x)\n", (int) tty);
printk2147drivers/char/istallion.cprintk("stli_flushbuffer(tty=%x)\n", (int) tty);
printk2203drivers/char/istallion.cprintk("stli_sendcmd(brdp=%x,portp=%x,cmd=%x,arg=%x,size=%d,copyback=%d)\n", (int) brdp, (int) portp, (int) cmd, (int) arg, size, copyback);
printk2207drivers/char/istallion.cprintk("STALLION: command already busy, cmd=%x!\n", (int) cmd);
printk2252drivers/char/istallion.cprintk("stli_read(brdp=%x,portp=%d)\n", (int) brdp, (int) portp);
printk2363drivers/char/istallion.cprintk("stli_hostcmd(brdp=%x,channr=%d)\n", (int) brdp, channr);
printk2604drivers/char/istallion.cprintk("stli_mkasyport(portp=%x,pp=%x,tiosp=%d)\n", (int) portp, (int) pp, (int) tiosp);
printk2706drivers/char/istallion.cprintk("stli_mkasysigs(sp=%x,dtr=%d,rts=%d)\n", (int) sp, dtr, rts);
printk2732drivers/char/istallion.cprintk("stli_mktiocm(sigvalue=%x)\n", (int) sigvalue);
printk2758drivers/char/istallion.cprintk("stli_initports(brdp=%x)\n", (int) brdp);
printk2764drivers/char/istallion.cprintk("STALLION: failed to allocate port structure\n");
printk2801drivers/char/istallion.cprintk("stli_ecpinit(brdp=%d)\n", (int) brdp);
printk2818drivers/char/istallion.cprintk("stli_ecpenable(brdp=%x)\n", (int) brdp);
printk2828drivers/char/istallion.cprintk("stli_ecpdisable(brdp=%x)\n", (int) brdp);
printk2841drivers/char/istallion.cprintk("stli_ecpgetmemptr(brdp=%x,offset=%x)\n", (int) brdp, (int) offset);
printk2845drivers/char/istallion.cprintk("STALLION: shared memory pointer=%x out of range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr);
printk2861drivers/char/istallion.cprintk("stli_ecpreset(brdp=%x)\n", (int) brdp);
printk2875drivers/char/istallion.cprintk("stli_ecpintr(brdp=%x)\n", (int) brdp);
printk2891drivers/char/istallion.cprintk("stli_ecpeiinit(brdp=%x)\n", (int) brdp);
printk2928drivers/char/istallion.cprintk("stli_ecpeigetmemptr(brdp=%x,offset=%x,line=%d)\n", (int) brdp, (int) offset, line);
printk2932drivers/char/istallion.cprintk("STALLION: shared memory pointer=%x out of range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr);
printk2982drivers/char/istallion.cprintk("STALLION: shared memory pointer=%x out of range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr);
printk3015drivers/char/istallion.cprintk("stli_onbinit(brdp=%d)\n", (int) brdp);
printk3035drivers/char/istallion.cprintk("stli_onbenable(brdp=%x)\n", (int) brdp);
printk3045drivers/char/istallion.cprintk("stli_onbdisable(brdp=%x)\n", (int) brdp);
printk3057drivers/char/istallion.cprintk("stli_onbgetmemptr(brdp=%x,offset=%x)\n", (int) brdp, (int) offset);
printk3061drivers/char/istallion.cprintk("STALLION: shared memory pointer=%x out of range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr);
printk3076drivers/char/istallion.cprintk("stli_onbreset(brdp=%x)\n", (int) brdp);
printk3098drivers/char/istallion.cprintk("stli_onbeinit(brdp=%d)\n", (int) brdp);
printk3121drivers/char/istallion.cprintk("stli_onbeenable(brdp=%x)\n", (int) brdp);
printk3131drivers/char/istallion.cprintk("stli_onbedisable(brdp=%x)\n", (int) brdp);
printk3144drivers/char/istallion.cprintk("stli_onbegetmemptr(brdp=%x,offset=%x,line=%d)\n", (int) brdp, (int) offset, line);
printk3148drivers/char/istallion.cprintk("STALLION: shared memory pointer=%x out of range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr);
printk3169drivers/char/istallion.cprintk("stli_onbereset(brdp=%x)\n", (int) brdp);
printk3190drivers/char/istallion.cprintk("stli_bbyinit(brdp=%d)\n", (int) brdp);
printk3210drivers/char/istallion.cprintk("stli_bbygetmemptr(brdp=%x,offset=%x)\n", (int) brdp, (int) offset);
printk3214drivers/char/istallion.cprintk("STALLION: shared memory pointer=%x out of range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr);
printk3232drivers/char/istallion.cprintk("stli_bbyreset(brdp=%x)\n", (int) brdp);
printk3253drivers/char/istallion.cprintk("stli_stalinit(brdp=%d)\n", (int) brdp);
printk3268drivers/char/istallion.cprintk("stli_stalgetmemptr(brdp=%x,offset=%x)\n", (int) brdp, (int) offset);
printk3272drivers/char/istallion.cprintk("STALLION: shared memory pointer=%x out of range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr);
printk3288drivers/char/istallion.cprintk("stli_stalreset(brdp=%x)\n", (int) brdp);
printk3316drivers/char/istallion.cprintk("stli_mapbrdmem(physaddr=%x,size=%x)\n", (int) physaddr, size);
printk3320drivers/char/istallion.cprintk("STALLION: failed to allocate virtual address space, size=%x\n", size);
printk3324drivers/char/istallion.cprintk("STALLION: failed to map phyiscal address=%x, errno=%d\n", (int) physaddr, rc);
printk3347drivers/char/istallion.cprintk("stli_initecp(brdp=%x,confp=%x)\n", (int) brdp, (int) confp);
printk3429drivers/char/istallion.cprintk("%s(%d): sig-> magic=%x romver=%x panel=%x,%x,%x,%x,%x,%x,%x,%x\n",
printk3478drivers/char/istallion.cprintk("stli_initonb(brdp=%x,confp=%x)\n", (int) brdp, (int) confp);
printk3580drivers/char/istallion.cprintk("%s(%d): sig-> magic=%x:%x:%x:%x romver=%x amask=%x:%x:%x\n",
printk3627drivers/char/istallion.cprintk("stli_startbrd(brdp=%x)\n", (int) brdp);
printk3639drivers/char/istallion.cprintk("%s(%d): CDK version %d.%d.%d --> nrdevs=%d memp=%x hostp=%x slavep=%x\n",
printk3646drivers/char/istallion.cprintk("STALLION: slave failed to allocate memory for all devices, devices=%d\n", nrdevs);
printk3655drivers/char/istallion.cprintk("STALLION: corrupted shared memory region?\n");
printk3661drivers/char/istallion.cprintk("STALLION: no slave control device found\n");
printk3734drivers/char/istallion.cprintk("stli_brdinit()\n");
printk3742drivers/char/istallion.cprintk("STALLION: failed to allocate board structures\n");
printk3775drivers/char/istallion.cprintk("STALLION: %s board type not supported in this driver\n", stli_brdnames[brdp->brdtype]);
printk3778drivers/char/istallion.cprintk("STALLION: unit=%d is unknown board type=%d\n", i, confp->brdtype);
printk3783drivers/char/istallion.cprintk("STALLION: %s board not found, unit=%d io=%x mem=%x\n", stli_brdnames[brdp->brdtype], i, confp->ioaddr1, (int) confp->memaddr);
printk3788drivers/char/istallion.cprintk("STALLION: %s found, unit=%d io=%x mem=%x nrpanels=%d nrports=%d\n", stli_brdnames[brdp->brdtype], i, confp->ioaddr1, (int) confp->memaddr, brdp->nrpanels, brdp->nrports);
printk3840drivers/char/istallion.cprintk("stli_memread(ip=%x,fp=%x,buf=%x,count=%d)\n", (int) ip, (int) fp, (int) buf, count);
printk3888drivers/char/istallion.cprintk("stli_memwrite(ip=%x,fp=%x,buf=%x,count=%x)\n", (int) ip, (int) fp, (int) buf, count);
printk3934drivers/char/istallion.cprintk("stli_memioctl(ip=%x,fp=%x,cmd=%x,arg=%x)\n", (int) ip, (int) fp, cmd, (int) arg);
printk3976drivers/char/istallion.cprintk("%s: version %s\n", stli_drvname, stli_drvversion);
printk3985drivers/char/istallion.cprintk("STALLION: failed to allocate memory (size=%d)\n", STLI_TXBUFSIZE);
printk3988drivers/char/istallion.cprintk("STALLION: failed to allocate memory (size=%d)\n", STLI_TXBUFSIZE);
printk3995drivers/char/istallion.cprintk("STALLION: failed to register serial memory device\n");
printk4038drivers/char/istallion.cprintk("STALLION: failed to register serial driver\n");
printk4040drivers/char/istallion.cprintk("STALLION: failed to register callout driver\n");
printk185drivers/char/keyboard.cprintk("Keyboard timed out\n");
printk377drivers/char/keyboard.cprintk("keyboard reply expected - got %02x\n", scancode);
printk382drivers/char/keyboard.cprintk("keyboard buffer overflow\n");
printk404drivers/char/keyboard.cprintk("keyboard error\n");
printk437drivers/char/keyboard.cprintk("keyboard: unknown e1 escape sequence\n");
printk465drivers/char/keyboard.cprintk("keyboard: unknown scancode e0 %02x\n", scancode);
printk486drivers/char/keyboard.cprintk("keyboard: unrecognized scancode (%02x) - ignored\n"
printk788drivers/char/keyboard.cprintk("keyboard.c: do_lowercase was called - impossible\n");
printk870drivers/char/keyboard.cprintk("do_fn called with value=%d\n", value);
printk1320drivers/char/keyboard.cprintk("initialize_kbd: keyboard failed self test.\n");
printk1332drivers/char/keyboard.cprintk("initialize_kbd: keyboard failed self test 2.\n");
printk1348drivers/char/keyboard.cprintk("initialize_kbd: reset kbd failed, no ACK.\n");
printk1354drivers/char/keyboard.cprintk("initialize_kbd: reset kbd failed, not POR.\n");
printk1364drivers/char/keyboard.cprintk("initialize_kbd: disable kbd failed, no ACK.\n");
printk1382drivers/char/keyboard.cprintk("initialize_kbd: keyboard enable failed.\n");
printk97drivers/char/lp.cprintk(KERN_DEBUG "lp%d success after %d counts.\n",minor,count);
printk186drivers/char/lp.cprintk(KERN_INFO "lp%d out of paper\n", minor);
printk190drivers/char/lp.cprintk(KERN_INFO "lp%d off-line\n", minor);
printk194drivers/char/lp.cprintk(KERN_ERR "lp%d printer error\n", minor);
printk251drivers/char/lp.cprintk(KERN_INFO "lp%d out of paper\n", minor);
printk259drivers/char/lp.cprintk(KERN_INFO "lp%d off-line\n", minor);
printk268drivers/char/lp.cprintk(KERN_ERR "lp%d reported invalid error status (on fire, eh?)\n", minor);
printk285drivers/char/lp.cprintk(KERN_DEBUG "lp%d sleeping at %d characters for %d jiffies\n",
printk340drivers/char/lp.cprintk(KERN_INFO "lp%d out of paper\n", minor);
printk344drivers/char/lp.cprintk(KERN_INFO "lp%d off-line\n", minor);
printk348drivers/char/lp.cprintk(KERN_ERR "lp%d printer error\n", minor);
printk365drivers/char/lp.cprintk("lp%d unable to use interrupt %d, error %d\n", minor, irq, ret);
printk398drivers/char/lp.cprintk(KERN_DEBUG "lp%d ioctl, cmd: 0x%x, arg: 0x%x\n", minor, cmd, arg);
printk551drivers/char/lp.cprintk("lp%d at 0x%04x, ", offset, base);
printk554drivers/char/lp.cprintk("(irq = %d)\n", LP_IRQ(offset));
printk556drivers/char/lp.cprintk("(polling)\n");
printk575drivers/char/lp.cprintk("lp: unable to get major %d\n", LP_MAJOR);
printk593drivers/char/lp.cprintk(KERN_INFO "lp%d: Not found\n", offset);
printk610drivers/char/lp.cprintk("lp: Driver configured but no interfaces found.\n");
printk380drivers/char/mem.cprintk("unable to get major %d for memory devs\n", MEM_MAJOR);
printk127drivers/char/mouse.cprintk("unable to get major %d for mouse devices\n",
printk207drivers/char/msbusmouse.cprintk("Microsoft BusMouse detected and installed.\n");
printk326drivers/char/n_tty.cprintk("%s: %d input overrun(s)\n", _tty_name(tty, buf),
printk578drivers/char/n_tty.cprintk("%s: unknown flag %d\n", tty_name(tty),
printk764drivers/char/n_tty.cprintk("n_tty_read_chan: called with read_buf == NULL?!?\n");
printk776drivers/char/n_tty.cprintk("read_chan: tty->pgrp <= 0!\n");
printk278drivers/char/psaux.cprintk("Warning: Mouse device busy in release_qp()\n");
printk282drivers/char/psaux.cprintk("Warning: Mouse device busy in release_qp()\n");
printk360drivers/char/psaux.cprintk("Error: Mouse device busy in open_qp()\n");
printk494drivers/char/psaux.cprintk("82C710 type pointing device detected -- driver installed.\n");
printk503drivers/char/psaux.cprintk("PS/2 auxiliary pointing device detected -- driver installed.\n");
printk70drivers/char/pty.cprintk("master pty_close: count = %d!!\n", tty->count);
printk361drivers/char/scc.cprintk("z8530drv: Pointer to queue anchor is NULL pointer [enq]\n");
printk368drivers/char/scc.cprintk("z8530drv: can't enqueue a NULL pointer\n");
printk385drivers/char/scc.cprintk("weird --- anchor->prev is NULL but not anchor->next [enq]\n");
printk393drivers/char/scc.cprintk("z8530drv: weird --- anchor->next is NULL but not anchor->prev [enq]\n");
printk425drivers/char/scc.cprintk("z8530drv: Pointer to queue anchor is NULL pointer [deq]\n");
printk440drivers/char/scc.cprintk("z8530drv: weird --- buffer->next is NULL but not buffer->prev [deq]\n");
printk454drivers/char/scc.cprintk("z8530drv: weird --- buffer->prev is NULL but not buffer->next [deq]\n");
printk505drivers/char/scc.cprintk("z8530drv: %s: can't allocate memory for rx buffer pool", kdevname(scc->tty->device));
printk530drivers/char/scc.cprintk("z8530drv: %s: can't allocate memory for tx buffer pool", kdevname(scc->tty->device));
printk623drivers/char/scc.cprintk("z8530drv: oops, deallocated only %d of %d rx buffers\n", cnt, scc->stat.rxbuffers);
printk625drivers/char/scc.cprintk("z8530drv: oops, deallocated %d instead of %d rx buffers. Very strange.\n", cnt, scc->stat.rxbuffers);
printk641drivers/char/scc.cprintk("z8530drv: oops, deallocated only %d of %d tx buffers\n", cnt, scc->stat.txbuffers);
printk643drivers/char/scc.cprintk("z8530drv: oops, deallocated %d instead of %d tx buffers. Very strange.\n", cnt, scc->stat.txbuffers);
printk669drivers/char/scc.cprintk("z8530drv: scc_get_buffer(%s): tx buffer pool empty\n", kdevname(scc->tty->device));
printk678drivers/char/scc.cprintk("z8530drv: scc_get_buffer(): panic - even no buffer found in tx queue\n");
printk685drivers/char/scc.cprintk("z8530drv: scc_get_buffer(%s): rx buffer pool empty\n", kdevname(scc->tty->device));
printk690drivers/char/scc.cprintk("z8530drv: scc_get_buffer(): panic - even no buffer found in rx queue\n");
printk721drivers/char/scc.cdefault    : printk("scc_isr(): unknown interrupt status (addr %4.4x, state %2.2x)\n",scc->ctrl,vector);
printk1015drivers/char/scc.cprintk("scc_rxint(): panic --- cannot get a buffer\n");
printk1028drivers/char/scc.cprintk("scc_rxint(): oops, received huge frame...\n");
printk1543drivers/char/scc.cprintk("z8530drv: warning: %s should be throttled\n", 
printk1648drivers/char/scc.cprintk("kiss_interpret_frame(): weird --- nothing to do.\n");
printk1718drivers/char/scc.cprintk("kiss_decode(): frame too long\n");
printk1871drivers/char/scc.cprintk("Init Z8530 driver: %u channels, IRQ", Nchips*2);
printk1877drivers/char/scc.cprintk("%s%d", flag, k);
printk1880drivers/char/scc.cprintk("\n");
printk1938drivers/char/scc.cprintk(badinfo, kdevname(device), routine);
printk1944drivers/char/scc.cprintk(badmagic, kdevname(device), routine);
printk1979drivers/char/scc.cprintk("ERROR: scc_open(): bad magic number for device (%s)",
printk2105drivers/char/scc.cprintk("ERROR: scc_ioctl(): bad magic number for device %s",
printk2132drivers/char/scc.cprintk("z8530drv: Warning --- could not get IRQ %d\n", hwcfg.irq);
printk2178drivers/char/scc.cprintk("%s%i: data port = 0x%3.3x  control port = 0x%3.3x\n",
printk2184drivers/char/scc.cprintk("%s%i: data port = 0x%3.3x  control port = 0x%3.3x -- %s\n",
printk2590drivers/char/scc.cprintk("scc: scc_throttle() called for device %d\n", MINOR(tty->device));
printk2607drivers/char/scc.cprintk("scc: scc_unthrottle() called for device %d\n", MINOR(tty->device));
printk2706drivers/char/scc.cprintk(BANNER);
printk2710drivers/char/scc.cprintk("Failed to register Z8530 SCC driver\n");
printk2748drivers/char/scc.cprintk("Copyright 1993,1995 Joerg Reuter DL1BKE (jreuter@lykos.tng.oche.de)\n");
printk2763drivers/char/scc.cprintk("Failed to unregister Z8530 SCC driver (%d)", -errno);
printk244drivers/char/selection.cprintk("selection: kmalloc() failed\n");
printk218drivers/char/serial.cprintk(badinfo, kdevname(device), routine);
printk222drivers/char/serial.cprintk(badmagic, kdevname(device), routine);
printk391drivers/char/serial.cprintk("handling break....");
printk409drivers/char/serial.cprintk("DR...");
printk443drivers/char/serial.cprintk("THRE...");
printk475drivers/char/serial.cprintk("ttys%d CD now %s...", info->line,
printk483drivers/char/serial.cprintk("scheduling hangup...");
printk493drivers/char/serial.cprintk("CTS tx start...");
printk504drivers/char/serial.cprintk("CTS tx stop...");
printk527drivers/char/serial.cprintk("rs_interrupt(%d)...", irq);
printk551drivers/char/serial.cprintk("status = %x...", status);
printk565drivers/char/serial.cprintk("rs loop break\n");
printk573drivers/char/serial.cprintk("rs port monitor (normal) irq %d: 0x%x, 0x%x\n",
printk576drivers/char/serial.cprintk("end.\n");
printk592drivers/char/serial.cprintk("rs_interrupt_single(%d)...", irq);
printk606drivers/char/serial.cprintk("status = %x...", status);
printk615drivers/char/serial.cprintk("rs_single loop break.\n");
printk622drivers/char/serial.cprintk("rs port monitor (single) irq %d: 0x%x, 0x%x\n",
printk625drivers/char/serial.cprintk("end.\n");
printk641drivers/char/serial.cprintk("rs_interrupt_multi(%d)...", irq);
printk650drivers/char/serial.cprintk("rs_interrupt_multi: NULL port1!\n");
printk665drivers/char/serial.cprintk("status = %x...", status);
printk681drivers/char/serial.cprintk("rs_multi loop break\n");
printk686drivers/char/serial.cprintk("rs port monitor irq %d: 0x%x, 0x%x\n",
printk706drivers/char/serial.cprintk("end.\n");
printk909drivers/char/serial.cprintk("starting up ttys%d (irq %d)...", info->line, info->irq);
printk1060drivers/char/serial.cprintk("Shutting down serial port %d (irq %d)....", info->line,
printk1087drivers/char/serial.cprintk("serial shutdown: request_irq: error %d"
printk1408drivers/char/serial.cprintk("throttle %s: %d....\n", _tty_name(tty, buf),
printk1431drivers/char/serial.cprintk("unthrottle %s: %d....\n", _tty_name(tty, buf),
printk1738drivers/char/serial.cprintk("Wild interrupt?  (IRQ %d)\n", i);
printk1849drivers/char/serial.cprintk("Couldn't reallocate serial interrupt "
printk2082drivers/char/serial.cprintk("rs_close ttys%d, count = %d\n", info->line, info->count);
printk2092drivers/char/serial.cprintk("rs_close: bad serial port count; tty->count is 1, "
printk2097drivers/char/serial.cprintk("rs_close: bad serial port count for ttys%d: %d\n",
printk2271drivers/char/serial.cprintk("block_til_ready before block: ttys%d, count = %d\n",
printk2306drivers/char/serial.cprintk("block_til_ready blocking: ttys%d, count = %d\n",
printk2317drivers/char/serial.cprintk("block_til_ready after blocking: ttys%d, count = %d\n",
printk2345drivers/char/serial.cprintk("rs_open %s%d, count = %d\n", tty->driver.name, info->line,
printk2368drivers/char/serial.cprintk("rs_open returning after block_til_ready with %d\n",
printk2386drivers/char/serial.cprintk("rs_open ttys%d successful...", info->line);
printk2406drivers/char/serial.cprintk("Serial driver version 4.11 with");
printk2408drivers/char/serial.cprintk(" HUB-6");
printk2412drivers/char/serial.cprintk(" enabled\n");
printk2414drivers/char/serial.cprintk(" no serial options enabled\n");
printk2746drivers/char/serial.cprintk("tty%02d%s at 0x%04x (irq = %d)", info->line, 
printk2751drivers/char/serial.cprintk(" is a 8250\n");
printk2754drivers/char/serial.cprintk(" is a 16450\n");
printk2757drivers/char/serial.cprintk(" is a 16550\n");
printk2760drivers/char/serial.cprintk(" is a 16550A\n");
printk2763drivers/char/serial.cprintk(" is a 16650\n");
printk2766drivers/char/serial.cprintk("\n");
printk2802drivers/char/serial.cprintk("Couldn't configure serial #%d (port=%d,irq=%d): "
printk2811drivers/char/serial.cprintk("register_serial(): autoconfig failed\n");
printk2814drivers/char/serial.cprintk("tty%02d at 0x%04x (irq = %d)", info->line, 
printk2818drivers/char/serial.cprintk(" is a 8250\n"); break;
printk2820drivers/char/serial.cprintk(" is a 16450\n"); break;
printk2822drivers/char/serial.cprintk(" is a 16550\n"); break;
printk2824drivers/char/serial.cprintk(" is a 16550A\n"); break;
printk2826drivers/char/serial.cprintk("\n"); break;
printk2842drivers/char/serial.cprintk("tty%02d unloaded\n", info->line);
printk46drivers/char/softdog.cprintk("WATCHDOG: Reboot didn't ?????\n");
printk114drivers/char/softdog.cprintk("Software Watchdog Timer: 0.02\n");
printk514drivers/char/stallion.cprintk("init_module()\n");
printk536drivers/char/stallion.cprintk("cleanup_module()\n");
printk539drivers/char/stallion.cprintk("Unloading %s: version %s\n", stl_drvname, stl_drvversion);
printk553drivers/char/stallion.cprintk("STALLION: failed to un-register tty driver, errno=%d,%d\n", -i, -j);
printk629drivers/char/stallion.cprintk("stl_open(tty=%x,filp=%x): device=%x\n", (int) tty, (int) filp, tty->device);
printk748drivers/char/stallion.cprintk("stl_waitcarrier(portp=%x,filp=%x)\n", (int) portp, (int) filp);
printk798drivers/char/stallion.cprintk("stl_close(tty=%x,filp=%x)\n", (int) tty, (int) filp);
printk878drivers/char/stallion.cprintk("stl_delay(len=%d)\n", len);
printk903drivers/char/stallion.cprintk("stl_write(tty=%x,from_user=%d,buf=%x,count=%d)\n", (int) tty, from_user, (int) buf, count);
printk978drivers/char/stallion.cprintk("stl_putchar(tty=%x,ch=%x)\n", (int) tty, (int) ch);
printk1016drivers/char/stallion.cprintk("stl_flushchars(tty=%x)\n", (int) tty);
printk1042drivers/char/stallion.cprintk("stl_writeroom(tty=%x)\n", (int) tty);
printk1076drivers/char/stallion.cprintk("stl_charsinbuffer(tty=%x)\n", (int) tty);
printk1107drivers/char/stallion.cprintk("stl_getserial(portp=%x,sp=%x)\n", (int) portp, (int) sp);
printk1142drivers/char/stallion.cprintk("stl_setserial(portp=%x,sp=%x)\n", (int) portp, (int) sp);
printk1170drivers/char/stallion.cprintk("stl_ioctl(tty=%x,file=%x,cmd=%x,arg=%x)\n", (int) tty, (int) file, cmd, (int) arg);
printk1260drivers/char/stallion.cprintk("stl_settermios(tty=%x,old=%x)\n", (int) tty, (int) old);
printk1296drivers/char/stallion.cprintk("stl_throttle(tty=%x)\n", (int) tty);
printk1334drivers/char/stallion.cprintk("stl_unthrottle(tty=%x)\n", (int) tty);
printk1378drivers/char/stallion.cprintk("stl_stop(tty=%x)\n", (int) tty);
printk1401drivers/char/stallion.cprintk("stl_start(tty=%x)\n", (int) tty);
printk1426drivers/char/stallion.cprintk("stl_hangup(tty=%x)\n", (int) tty);
printk1464drivers/char/stallion.cprintk("stl_flushbuffer(tty=%x)\n", (int) tty);
printk1541drivers/char/stallion.cprintk("stl_txisr(panelp=%x,ioaddr=%x)\n", (int) panelp, ioaddr);
printk1546drivers/char/stallion.cprintk("STALLION: bad TX interrupt ack value=%x\n", ioack);
printk1636drivers/char/stallion.cprintk("stl_rxisr(panelp=%x,ioaddr=%x)\n", (int) panelp, ioaddr);
printk1641drivers/char/stallion.cprintk("STALLION: bad RX interrupt ack value=%x\n", ioack);
printk1700drivers/char/stallion.cprintk("STALLION: bad RX interrupt ack value=%x\n", ioack);
printk1723drivers/char/stallion.cprintk("stl_mdmisr(panelp=%x)\n", (int) panelp);
printk1728drivers/char/stallion.cprintk("STALLION: bad MODEM interrupt ack value=%x\n", ioack);
printk1762drivers/char/stallion.cprintk("stl_intr(irq=%d,regs=%x)\n", irq, (int) regs);
printk1864drivers/char/stallion.cprintk("STALLION: unknown board type=%x\n", brdp->brdtype);
printk1900drivers/char/stallion.cprintk("stl_offintr(portp=%x)\n", (int) portp);
printk1946drivers/char/stallion.cprintk("STALLION: cd1400 device not responding, port=%d panel=%d brd=%d\n", portp->portnr, portp->panelnr, portp->brdnr);
printk2116drivers/char/stallion.cprintk("SETPORT: portnr=%d panelnr=%d brdnr=%d\n", portp->portnr, portp->panelnr, portp->brdnr);
printk2117drivers/char/stallion.cprintk("    cor1=%x cor2=%x cor3=%x cor4=%x cor5=%x\n", cor1, cor2, cor3, cor4, cor5);
printk2118drivers/char/stallion.cprintk("    mcor1=%x mcor2=%x rtpr=%x sreron=%x sreroff=%x\n", mcor1, mcor2, rtpr, sreron, sreroff);
printk2119drivers/char/stallion.cprintk("    tcor=%x tbpr=%x rcor=%x rbpr=%x\n", clk, div, clk, div);
printk2120drivers/char/stallion.cprintk("    schr1=%x schr2=%x schr3=%x schr4=%x\n", tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP], tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]);
printk2176drivers/char/stallion.cprintk("stl_setsignals(portp=%x,dtr=%d,rts=%d)\n", (int) portp, dtr, rts);
printk2210drivers/char/stallion.cprintk("stl_getsignals(portp=%x)\n", (int) portp);
printk2242drivers/char/stallion.cprintk("stl_enablerxtx(portp=%x,rx=%d,tx=%d)\n", (int) portp, rx, tx);
printk2278drivers/char/stallion.cprintk("stl_startrxtx(portp=%x,rx=%d,tx=%d)\n", (int) portp, rx, tx);
printk2316drivers/char/stallion.cprintk("stl_disableintrs(portp=%x)\n", (int) portp);
printk2334drivers/char/stallion.cprintk("stl_sendbreak(portp=%x,len=%d)\n", (int) portp, (int) len);
printk2362drivers/char/stallion.cprintk("stl_mapirq(irq=%d)\n", irq);
printk2372drivers/char/stallion.cprintk("STALLION: failed to register interrupt routine for irq=%d\n", irq);
printk2398drivers/char/stallion.cprintk("stl_initports(panelp=%x)\n", (int) panelp);
printk2427drivers/char/stallion.cprintk("STALLION: cd1400 not responding, brd=%d panel=%d chip=%d\n", panelp->brdnr, panelp->panelnr, i);
printk2452drivers/char/stallion.cprintk("STALLION: failed to allocate memory (size=%d)\n", sizeof(stlport_t));
printk2491drivers/char/stallion.cprintk("stl_initeio(brdp=%x)\n", (int) brdp);
printk2520drivers/char/stallion.cprintk("STALLION: invalid irq=%d for brd=%d\n", brdp->irq, brdp->brdnr);
printk2527drivers/char/stallion.cprintk("STALLION: failed to allocate memory (size=%d)\n", sizeof(stlpanel_t));
printk2557drivers/char/stallion.cprintk("stl_initech(brdp=%x)\n", (int) brdp);
printk2574drivers/char/stallion.cprintk("STALLION: invalid irq=%d for brd=%d\n", brdp->irq, brdp->brdnr);
printk2595drivers/char/stallion.cprintk("STALLION: invalid irq=%d for brd=%d\n", brdp->irq, brdp->brdnr);
printk2626drivers/char/stallion.cprintk("STALLION: failed to allocate memory (size=%d)\n", sizeof(stlpanel_t));
printk2677drivers/char/stallion.cprintk("stl_brdinit(brdp=%x)\n", (int) brdp);
printk2690drivers/char/stallion.cprintk("STALLION: unit=%d is unknown board type=%d\n", brdp->brdnr, brdp->brdtype);
printk2696drivers/char/stallion.cprintk("STALLION: %s board not found, unit=%d io=%x irq=%d\n", stl_brdnames[brdp->brdtype], brdp->brdnr, brdp->ioaddr1, brdp->irq);
printk2704drivers/char/stallion.cprintk("STALLION: %s found, unit=%d io=%x irq=%d nrpanels=%d nrports=%d\n", stl_brdnames[brdp->brdtype], brdp->brdnr, brdp->ioaddr1, brdp->irq, brdp->nrpanels, brdp->nrports);
printk2726drivers/char/stallion.cprintk("stl_findpcibrds()\n");
printk2739drivers/char/stallion.cprintk("STALLION: failed to read class type from PCI board, errno=%x\n", rc);
printk2746drivers/char/stallion.cprintk("STALLION: too many boards found, maximum supported %d\n", STL_MAXBRDS);
printk2757drivers/char/stallion.cprintk("STALLION: failed to allocate memory (size=%d)\n", sizeof(stlbrd_t));
printk2765drivers/char/stallion.cprintk("STALLION: failed to read BAR register from PCI board, errno=%x\n", rc);
printk2771drivers/char/stallion.cprintk("STALLION: failed to read BAR register from PCI board, errno=%x\n", rc);
printk2776drivers/char/stallion.cprintk("%s(%d): BAR0=%x BAR1=%x\n", __FILE__, __LINE__, brdp->ioaddr2, brdp->ioaddr1);
printk2780drivers/char/stallion.cprintk("STALLION: failed to read BAR register from PCI board, errno=%x\n", rc);
printk2788drivers/char/stallion.cprintk("STALLION: failed to write register on PCI board, errno=%x\n", rc);
printk2792drivers/char/stallion.cprintk("STALLION: failed to write register on PCI board, errno=%x\n", rc);
printk2821drivers/char/stallion.cprintk("stl_initbrds()\n");
printk2825drivers/char/stallion.cprintk("STALLION: too many boards in configuration table, truncating to %d\n", STL_MAXBRDS);
printk2837drivers/char/stallion.cprintk("STALLION: failed to allocate memory (size=%d)\n", sizeof(stlbrd_t));
printk2866drivers/char/stallion.cprintk("%s: version %s\n", stl_drvname, stl_drvversion);
printk2875drivers/char/stallion.cprintk("STALLION: failed to allocate memory (size=%d)\n", STL_TXBUFSIZE);
printk2918drivers/char/stallion.cprintk("STALLION: failed to register serial driver\n");
printk2920drivers/char/stallion.cprintk("STALLION: failed to register callout driver\n");
printk452drivers/char/tga.cprintk("tga_console_init: TGA not found!!! :-(\n");
printk463drivers/char/tga.cprintk("tga_console_init: mem_base 0x%x\n", tga_mem_base);
printk468drivers/char/tga.cprintk("TGA type (0x%x) unrecognized!\n", tga_type);
printk433drivers/char/tpqic02.cprintk(TPQIC02_NAME ": %s\n", s);
printk480drivers/char/tpqic02.cprintk(TPQIC02_NAME ": sense: %s\n", exception_list[n].msg);
printk497drivers/char/tpqic02.cprintk(TPQIC02_NAME ": decode_exception_nr: exception(%x) not recognized\n", s);
printk650drivers/char/tpqic02.cprintk(TPQIC02_NAME ": reset failed!\n");
printk652drivers/char/tpqic02.cprintk(TPQIC02_NAME ": reset successful\n");
printk755drivers/char/tpqic02.cTPQDEB({printk("wait_for_ready: additional timeout: %d\n", spin_t);})
printk880drivers/char/tpqic02.cprintk(TPQIC02_NAME ": reading status bytes: ");
printk896drivers/char/tpqic02.cprintk("[%1d]=0x%x  ", q-stp, (unsigned) (*q) & 0xff);
printk915drivers/char/tpqic02.cprintk("\n");
printk960drivers/char/tpqic02.cprintk("\n" TPQIC02_NAME ": %2d:");
printk961drivers/char/tpqic02.cprintk(" %2x", vus[i] & 0xff);
printk963drivers/char/tpqic02.cprintk("\n");
printk979drivers/char/tpqic02.cprintk(TPQIC02_NAME ": tp_sense(ignore=0x%x) enter\n", ignore);
printk995drivers/char/tpqic02.cprintk(TPQIC02_NAME ": tp_sense: status: %x, error count: %d, underruns: %d\n",
printk998drivers/char/tpqic02.cprintk(TPQIC02_NAME ": tp_sense: no hard errors, soft error count: %d, underruns: %d\n",
printk1062drivers/char/tpqic02.cprintk(TPQIC02_NAME ": Waiting for (re-)wind to finish: stat=0x%x\n", stat);
printk1097drivers/char/tpqic02.cprintk(TPQIC02_NAME ": ll_do_qic_cmd(%x, %ld) failed\n", cmd, (long) timeout);
printk1133drivers/char/tpqic02.cprintk(TPQIC02_NAME ": Exception persist in ll_do_qic_cmd[1](%x, %ld)", cmd, (long) timeout);
printk1140drivers/char/tpqic02.cprintk(TPQIC02_NAME ": ll_do_qic_cmd: send_qic02_cmd failed, stat = 0x%x\n", stat);
printk1154drivers/char/tpqic02.cprintk(TPQIC02_NAME ": Exception persist in ll_do_qic_cmd[2](%x, %ld)\n", cmd, (long) timeout);
printk1162drivers/char/tpqic02.cprintk(TPQIC02_NAME ": ll_do_qic_cmd %x: wait failed, stat == 0x%x\n", cmd, stat);
printk1272drivers/char/tpqic02.cprintk(TPQIC02_NAME ": rewind failed in do_qic_cmd(). stat=0x%2x", stat);
printk1584drivers/char/tpqic02.cTPQDEB({printk(TPQIC02_NAME ": doing_read==%d, doing_write==%d\n", doing_read, doing_write);})
printk1634drivers/char/tpqic02.cprintk(TPQIC02_NAME ": start_dma: init %s failed\n",
printk1653drivers/char/tpqic02.cprintk(TPQIC02_NAME ": requested unknown mode %d\n", mode);
printk1756drivers/char/tpqic02.cprintk("time-out in %s driver\n", TPQIC02_NAME);
printk1811drivers/char/tpqic02.cprintk("@");
printk1830drivers/char/tpqic02.cprintk("      status %02x\n", stat);
printk1854drivers/char/tpqic02.cprintk(TPQIC02_NAME ": dma_residue == %x !!!\n", i);
printk1877drivers/char/tpqic02.cprintk(TPQIC02_NAME ": Unexpected interrupt, stat == %x\n",
printk1936drivers/char/tpqic02.cprintk(TPQIC02_NAME ": request READ, minor=%x, buf=%p, count=%x, pos=%lx, flags=%x\n",
printk1968drivers/char/tpqic02.cprintk("read: return_read_eof==%d, reported_read_eof==%d, total_bytes_done==%lu\n", return_read_eof, reported_read_eof, total_bytes_done);
printk2030drivers/char/tpqic02.cprintk("Trouble: stat==%02x\n", stat);
printk2046drivers/char/tpqic02.cprintk(TPQIC02_NAME ": read(): return_read_eof=%d, status_eof_detected=YES. return_read_eof:=YES\n", return_read_eof);
printk2110drivers/char/tpqic02.cprintk(TPQIC02_NAME ": request WRITE, minor=%x, buf=%p, count=%x, pos=%lx, flags=%x\n",
printk2231drivers/char/tpqic02.cprintk(TPQIC02_NAME ": status_bytes_wr %x, buf %p, total_bytes_done %lx, count %x\n", status_bytes_wr, buf, total_bytes_done, count);
printk2257drivers/char/tpqic02.cprintk("qic02_tape_open: dev=%s, flags=%x     ",
printk2395drivers/char/tpqic02.cprintk(TPQIC02_NAME ": format: %s%s\n", (dens!=0)? "QIC-" : "", format_names[dens]);
printk2439drivers/char/tpqic02.cprintk("qic02_tape_release: dev=%s\n",
printk2570drivers/char/tpqic02.cprintk(TPQIC02_NAME ": ioctl(%4x, %4x, %4lx)\n", dev_maj, iocmd, ioarg);
printk2578drivers/char/tpqic02.cprintk(TPQIC02_NAME ": Oops! Wrong device?\n");
printk2693drivers/char/tpqic02.cprintk("OP op=%4x, count=%4x\n", operation.mt_op, operation.mt_count);
printk2722drivers/char/tpqic02.cprintk("GET ");
printk2750drivers/char/tpqic02.cprintk("POS ");
printk2840drivers/char/tpqic02.cprintk(TPQIC02_NAME ": can't allocate IRQ%d for QIC-02 tape\n",
printk2848drivers/char/tpqic02.cprintk(TPQIC02_NAME ": can't allocate DMA%d for QIC-02 tape\n",
printk2855drivers/char/tpqic02.cprintk(TPQIC02_NAME ": Settings: IRQ %d, DMA %d, IO 0x%x, IFC %s\n",
printk2881drivers/char/tpqic02.cprintk(TPQIC02_NAME ": internal error: tpstatus struct incorrect!\n");
printk2885drivers/char/tpqic02.cprintk(TPQIC02_NAME ": internal error: DMA buffer size out of range\n");
printk2894drivers/char/tpqic02.cprintk(TPQIC02_NAME ": IRQ %d, DMA %d, IO 0x%x, IFC %s, %s, %s\n",
printk2909drivers/char/tpqic02.cprintk(TPQIC02_NAME ": Runtime config, %s, %s\n", 
printk2915drivers/char/tpqic02.cprintk(TPQIC02_NAME ": DMA buffers: %u blocks", NR_BLK_BUF);
printk2922drivers/char/tpqic02.cprintk(", at address 0x%lx (0x%lx)\n", buffaddr, (unsigned long) &qic02_tape_buf);
printk2926drivers/char/tpqic02.cprintk(TPQIC02_NAME ": DMA buffer *must* be in lower 16MB\n");
printk2933drivers/char/tpqic02.cprintk(TPQIC02_NAME ": Unable to get chrdev major %d\n", QIC02_TAPE_MAJOR);
printk156drivers/char/tty_io.cprintk(badtty, kdevname(device), routine);
printk160drivers/char/tty_io.cprintk(badmagic, kdevname(device), routine);
printk185drivers/char/tty_io.cprintk("Warning: dev (%s) tty->count(%d) != #fd's(%d) in %s\n",
printk287drivers/char/tty_io.cprintk("tty_check_change: tty->pgrp <= 0!\n");
printk399drivers/char/tty_io.cprintk("do_tty_hangup: N_TTY open: error %d\n",
printk428drivers/char/tty_io.cprintk("%s hangup...\n", tty_name(tty));
printk436drivers/char/tty_io.cprintk("%s vhangup...\n", tty_name(tty));
printk899drivers/char/tty_io.cprintk("Attempt to open closing tty %s.\n",
printk901drivers/char/tty_io.cprintk("Ack!!!!  This should never happen!!\n");
printk980drivers/char/tty_io.cprintk("release_dev: bad idx when trying to free (%s)\n",
printk985drivers/char/tty_io.cprintk("release_dev: driver.table[%d] not tty for (%s)\n",
printk990drivers/char/tty_io.cprintk("release_dev: driver.termios[%d] not termios for ("
printk996drivers/char/tty_io.cprintk("release_dev: driver.termios_locked[%d] not termios_locked for ("
printk1004drivers/char/tty_io.cprintk("release_dev of %s (tty count=%d)...", tty_name(tty),
printk1015drivers/char/tty_io.cprintk("release_dev: other->table[%d] not o_tty for ("
printk1021drivers/char/tty_io.cprintk("release_dev: other->termios[%d] not o_termios for ("
printk1027drivers/char/tty_io.cprintk("release_dev: other->termios_locked[%d] not o_termios_locked for ("
printk1034drivers/char/tty_io.cprintk("release_dev: bad pty pointers\n");
printk1045drivers/char/tty_io.cprintk("release_dev: bad pty slave count (%d) for %s\n",
printk1051drivers/char/tty_io.cprintk("release_dev: bad tty->count (%d) for %s\n",
printk1070drivers/char/tty_io.cprintk("freeing tty structure...");
printk1181drivers/char/tty_io.cprintk("opening %s...", tty_name(tty));
printk1193drivers/char/tty_io.cprintk("error %d in opening %s...", retval, tty_name(tty));
printk1523drivers/char/tty_io.cprintk("TIOCLINUX (0/8/9) ioctl is gone - use /dev/vcs\n");
printk1527drivers/char/tty_io.cprintk("Deprecated TIOCLINUX (1) ioctl\n");
printk31drivers/char/tty_ioctl.c# define  PRINTK(x)  printk (x)
printk48drivers/char/tty_ioctl.cprintk("%s wait until sent...\n", tty_name(tty));
printk61drivers/char/tty_ioctl.cprintk("waiting %s...(%d)\n", tty_name(tty), tty->driver.chars_in_buffer(tty));
printk83drivers/char/tty_ioctl.cprintk("Warning?!? termios_locked is NULL.\n");
printk213drivers/char/vc_screen.cprintk("unable to get major %d for vcs device", VCS_MAJOR);
printk298drivers/net/3c501.cprintk("%s probe at %#x failed to detect IRQ line.\n",
printk313drivers/net/3c501.cprintk("%s: %s EtherLink at %#lx, using %sIRQ %d.\n", dev->name, mname, dev->base_addr,
printk317drivers/net/3c501.cprintk("WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n");
printk321drivers/net/3c501.cprintk("%s", version);
printk362drivers/net/3c501.cprintk("%s: Doing el_open()...", dev->name);
printk391drivers/net/3c501.cprintk(" transmitter busy, deferred.\n");
printk395drivers/net/3c501.cprintk ("%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",
printk429drivers/net/3c501.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk468drivers/net/3c501.cprintk("%s: burped during tx load.\n", dev->name);
printk481drivers/net/3c501.cprintk(" queued xmit.\n");
printk501drivers/net/3c501.cprintk ("3c501 driver: irq %d for unknown device.\n", irq);
printk519drivers/net/3c501.cprintk("%s: el_interrupt() aux=%#02x", dev->name, axsr);
printk521drivers/net/3c501.cprintk("%s: Reentering the interrupt driver!\n", dev->name);
printk525drivers/net/3c501.cprintk("%s: Inconsistent state loading while not in tx\n",
printk546drivers/net/3c501.cprintk("%s: Interrupt while loading [", dev->name);
printk547drivers/net/3c501.cprintk(" txsr=%02x gp=%04x rp=%04x]\n", txsr, inw(GP_LOW),inw(RX_LOW));
printk555drivers/net/3c501.cprintk(" txsr=%02x gp=%04x rp=%04x", txsr, inw(GP_LOW),inw(RX_LOW));
printk563drivers/net/3c501.cprintk("%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x"
printk575drivers/net/3c501.cprintk("%s: Transmit failed 16 times, ethernet jammed?\n",dev->name);
printk586drivers/net/3c501.cprintk(" retransmitting after a collision.\n");
printk605drivers/net/3c501.cprintk(" Tx succeeded %s\n",
printk623drivers/net/3c501.cprintk(" rxsr=%02x txsr=%02x rp=%04x", rxsr, inb(TX_STATUS),inw(RX_LOW));
printk633drivers/net/3c501.cprintk(" runt.\n");
printk648drivers/net/3c501.cprintk("%s: No packet seen, rxsr=%02x **resetting 3c501***\n",
printk653drivers/net/3c501.cprintk(".\n");
printk684drivers/net/3c501.cprintk(" el_receive %d.\n", pkt_len);
printk689drivers/net/3c501.cprintk("%s: bogus packet, length=%d\n", dev->name, pkt_len);
printk708drivers/net/3c501.cprintk("%s: Memory squeeze, dropping packet.\n", dev->name);
printk734drivers/net/3c501.cprintk("3c501 reset...");
printk759drivers/net/3c501.cprintk("%s: Shutting down ethercard at %#x.\n", dev->name, ioaddr);
printk188drivers/net/3c503.cprintk("3c503.c: Passed a NULL device.\n");
printk193drivers/net/3c503.cprintk(version);
printk199drivers/net/3c503.cprintk ("3c503: unable to allocate memory for dev->priv.\n");
printk203drivers/net/3c503.cprintk("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr);
printk207drivers/net/3c503.cprintk(" %2.2x", dev->dev_addr[i] = inb(ioaddr + i));
printk220drivers/net/3c503.cif (ei_debug > 2) printk(" memory jumpers %2.2x ", membase_reg);
printk232drivers/net/3c503.cprintk(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex");
printk254drivers/net/3c503.cprintk("3c503.c: memory failure or memory address conflict.\n");
printk305drivers/net/3c503.cprintk("3c503: configured interrupt %d invalid, will use autoIRQ.\n",
printk317drivers/net/3c503.cprintk("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n",
printk322drivers/net/3c503.cprintk("\n%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n",
printk385drivers/net/3c503.cprintk("%s: Resetting the 3c503 board...", dev->name);
printk386drivers/net/3c503.cprintk("%#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR),
printk393drivers/net/3c503.cif (ei_debug > 1) printk("done\n");
printk460drivers/net/3c503.cprintk("%s: FIFO blocked in el2_block_output (at %d of %d, bc=%d).\n",
printk500drivers/net/3c503.cprintk("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name);
printk546drivers/net/3c503.cprintk("%s: FIFO blocked in el2_block_input() (at %d of %d, bc=%d).\n",
printk590drivers/net/3c503.cprintk(KERN_NOTICE "3c503.c: Presently autoprobing (not recommended) for a single card.\n");
printk593drivers/net/3c503.cprintk(KERN_WARNING "3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]);
printk66drivers/net/3c505.cif (!p) printk(null_msg, filename,__FUNCTION__,__LINE__)
printk70drivers/net/3c505.cprintk(timeout_msg, filename,__FUNCTION__,(lineno))
printk75drivers/net/3c505.cprintk(invalid_pcb_msg, (len),filename,__FUNCTION__,__LINE__)
printk303drivers/net/3c505.cprintk("%s: start receive command failed \n", dev->name);
printk373drivers/net/3c505.cprintk("%s: PCB send was NAKed\n", dev->name);
printk375drivers/net/3c505.cprintk("%s: timeout after sending PCB\n", dev->name);
printk379drivers/net/3c505.cprintk("%s: timeout in middle of sending PCB\n", dev->name);
printk462drivers/net/3c505.cprintk("%s: mangled PCB received\n", dev->name);
printk484drivers/net/3c505.cprintk("%s: Resetting the adapter, please wait (approx 20 s)\n",
printk531drivers/net/3c505.cprintk("%s: restarting receiver\n", dev->name);
printk566drivers/net/3c505.cprintk("*** bad packet len %d at %s(%d)\n",len,filename,__LINE__);
printk612drivers/net/3c505.cprintk("*** timeout at %s(%d) reading word %d of %d ***\n",
printk647drivers/net/3c505.cprintk ("elp_interrupt(): illegal IRQ number found in interrupt routine (%i)\n", irq);
printk654drivers/net/3c505.cprintk ("elp_interrupt(): irq %d for unknown device.\n", irq);
printk664drivers/net/3c505.cprintk("%s: Re-entering the interrupt handler.\n", dev->name);
printk696drivers/net/3c505.cprintk("%s: interrupt - packet not received correctly\n", dev->name);
printk701drivers/net/3c505.cprintk("%s: interrupt - packet received of length %i (%i)\n", dev->name, len, dlen);
printk707drivers/net/3c505.cprintk("%s: packet received\n", dev->name);
printk711drivers/net/3c505.cprintk("%s: interrupt - failed to send receive start PCB\n", dev->name);
printk713drivers/net/3c505.cprintk("%s: receive procedure complete\n", dev->name);
printk723drivers/net/3c505.cprintk("%s: interrupt - configure response received\n", dev->name);
printk732drivers/net/3c505.cprintk("%s: Adapter memory configuration %s.\n",dev->name,
printk742drivers/net/3c505.cprintk("%s: Multicast address list loading %s.\n",dev->name,
printk752drivers/net/3c505.cprintk("%s: Ethernet address setting %s.\n",dev->name,
printk768drivers/net/3c505.cprintk("%s: interrupt - statistics response received\n", dev->name);
printk776drivers/net/3c505.cprintk("%s: interrupt - packet sent\n", dev->name);
printk781drivers/net/3c505.cprintk("%s: interrupt - error sending packet %4.4x\n",
printk791drivers/net/3c505.cprintk("%s: unknown PCB received - %2.2x\n", dev->name, adapter->irx_pcb.command);
printk795drivers/net/3c505.cprintk("%s: failed to read PCB on interrupt\n", dev->name);
printk823drivers/net/3c505.cprintk("%s: request to open device\n", dev->name);
printk829drivers/net/3c505.cprintk("%s: Opening a non-existent physical device\n", dev->name);
printk881drivers/net/3c505.cprintk("%s: sending 3c505 memory configuration command\n", dev->name);
printk892drivers/net/3c505.cprintk("%s: couldn't send memory configuration command\n", dev->name);
printk906drivers/net/3c505.cprintk("%s: sending 82586 configure command\n", dev->name);
printk912drivers/net/3c505.cprintk("%s: couldn't send 82586 configure command\n", dev->name);
printk925drivers/net/3c505.cprintk("%s: start receive command failed \n", dev->name);
printk927drivers/net/3c505.cprintk("%s: start receive command sent\n", dev->name);
printk959drivers/net/3c505.cprintk("Warning, bad length nlen=%d len=%d %s(%d)\n",nlen,len,filename,__LINE__);
printk984drivers/net/3c505.cprintk("%s: timeout at %s(%d) writing word %d of %d ***\n",
printk1024drivers/net/3c505.cprintk("%s: request to send packet of length %d\n", dev->name, (int)skb->len);
printk1034drivers/net/3c505.cprintk("%s: transmit timed out, not resetting adapter\n", dev->name);
printk1036drivers/net/3c505.cprintk("%s: hmmm...seemed to have missed an interrupt!\n", dev->name);
printk1037drivers/net/3c505.cprintk("%s: status %#02x\n", dev->name, stat);
printk1046drivers/net/3c505.cprintk("%s: send packet PCB failed\n", dev->name);
printk1051drivers/net/3c505.cprintk("%s: packet of length %d sent\n", dev->name, (int)skb->len);
printk1084drivers/net/3c505.cprintk("%s: request for stats\n", dev->name);
printk1096drivers/net/3c505.cprintk("%s: couldn't send get statistics command\n", dev->name);
printk1127drivers/net/3c505.cprintk("%s: request to close device\n", dev->name);
printk1183drivers/net/3c505.cprintk("%s: request to set multicast list\n", dev->name);
printk1198drivers/net/3c505.cprintk("%s: couldn't send set_multicast command\n", dev->name);
printk1219drivers/net/3c505.cprintk("%s: sending 82586 configure command\n", dev->name);
printk1224drivers/net/3c505.cprintk("%s: couldn't send 82586 configure command\n", dev->name);
printk1296drivers/net/3c505.cprintk(search_msg, name, addr);
printk1301drivers/net/3c505.cprintk(notfound_msg, 1);
printk1311drivers/net/3c505.cprintk(stilllooking_msg);
printk1326drivers/net/3c505.cprintk(notfound_msg, 2);
printk1339drivers/net/3c505.cprintk(notfound_msg, 3);
printk1348drivers/net/3c505.cprintk(found_msg);
printk1378drivers/net/3c505.cprintk(couldnot_msg, dev->name);
printk1422drivers/net/3c505.cprintk("%s: not responding to first PCB\n", dev->name);
printk1428drivers/net/3c505.cprintk("%s: Detected IRQ doesn't match user-defined one.\n",dev->name);
printk1436drivers/net/3c505.cprintk("%s: No IRQ reported by autoirq_report().\n",dev->name);
printk1437drivers/net/3c505.cprintk("%s: Check the jumpers of your 3c505 board.\n",dev->name);
printk1443drivers/net/3c505.cprintk("%s: Impossible IRQ %d reported by autoirq_report().\n",
printk1462drivers/net/3c505.cprintk("%s: 3c505 card found at I/O %#lx using IRQ%d"
printk1494drivers/net/3c505.cprintk("3c505: You should not use auto-probing with insmod!\n");
printk1498drivers/net/3c505.cprintk("3c505: register_netdev() returned non-zero.\n");
printk355drivers/net/3c507.cprintk(version);
printk357drivers/net/3c507.cprintk("%s: 3c507 at %#x,", dev->name, ioaddr);
printk366drivers/net/3c507.cprintk ("unable to get IRQ %d (irqval=%d).\n", irq, irqval);
printk377drivers/net/3c507.cprintk(" %02x", dev->dev_addr[i]);
printk407drivers/net/3c507.cprintk(", IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->irq,
printk411drivers/net/3c507.cprintk(version);
printk464drivers/net/3c507.cprintk("%s: transmit timed out, %s?  ", dev->name,
printk469drivers/net/3c507.cif (net_debug > 1) printk("Resetting board.\n");
printk474drivers/net/3c507.cif (net_debug > 1) printk("Kicking board.\n");
printk493drivers/net/3c507.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk525drivers/net/3c507.cprintk ("net_interrupt(): irq %d for unknown device.\n", irq);
printk537drivers/net/3c507.cprintk("%s: 3c507 interrupt, status %4.4x.\n", dev->name, status);
printk548drivers/net/3c507.cif (net_debug > 5)  printk("Couldn't reap %#x.\n", lp->tx_reap);
printk564drivers/net/3c507.cprintk("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status);
printk574drivers/net/3c507.cprintk("Received packet, rx_head %04x.\n", lp->rx_head);
printk583drivers/net/3c507.cprintk("%s: Command unit stopped, status %04x, restarting.\n",
printk596drivers/net/3c507.cprintk("%s: Rx unit stopped, status %04x, restarting.\n",
printk744drivers/net/3c507.cprintk("%s: i82586 initialization timed out with status %04x,"
printk756drivers/net/3c507.cprintk("%s: Initialized 82586, status %04x.\n", dev->name,
printk799drivers/net/3c507.cprintk("%s: 3c507 @%x send length = %d, tx_block %3x, next %3x.\n",
printk827drivers/net/3c507.cprintk("%s: Rx frame at %#x corrupted, status %04x cmd %04x"
printk846drivers/net/3c507.cprintk("%s: Memory squeeze, dropping packet.\n", dev->name);
printk892drivers/net/3c507.cprintk("3c507: You should not use auto-probing with insmod!\n");
printk896drivers/net/3c507.cprintk("3c507: register_netdev() returned non-zero.\n");
printk175drivers/net/3c509.cif (once) printk("3c509: Somebody has reserved 0x%x, can't do ID_PORT lookup, nor card auto-probing\n",ID_PORT);
printk237drivers/net/3c509.cprintk("%s: 3c509 at %#3.3lx tag %d, %s port, address ",
printk243drivers/net/3c509.cprintk(" %2.2x", dev->dev_addr[i]);
printk244drivers/net/3c509.cprintk(", IRQ %d.\n", dev->irq);
printk253drivers/net/3c509.cprintk(version);
printk298drivers/net/3c509.cprintk("  3c509 EEPROM word %d %#4.4x.\n", index, word);
printk321drivers/net/3c509.cprintk("%s: Opening, IRQ %d   status@%x %4.4x.\n", dev->name,
printk374drivers/net/3c509.cprintk("%s: Opened 3c509  IRQ %d  status %4.4x.\n",
printk392drivers/net/3c509.cprintk("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
printk410drivers/net/3c509.cprintk("%s: el3_start_xmit(length = %ld) called, status %4.4x.\n",
printk418drivers/net/3c509.cprintk("%s: Missed interrupt, status then %04x now %04x"
printk432drivers/net/3c509.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk474drivers/net/3c509.cprintk ("el3_interrupt(): irq %d for unknown device.\n", irq);
printk479drivers/net/3c509.cprintk("%s: Re-entering the interrupt handler.\n", dev->name);
printk486drivers/net/3c509.cprintk("%s: interrupt, status %4.4x.\n", dev->name, status);
printk495drivers/net/3c509.cprintk("  TX room bit was handled.\n");
printk505drivers/net/3c509.cprintk("%s: Infinite loop in interrupt, status %4.4x.\n",
printk517drivers/net/3c509.cprintk("%s: exiting interrupt, status %4.4x.\n", dev->name,
printk549drivers/net/3c509.cprintk("   Updating the statistics.\n");
printk580drivers/net/3c509.cprintk("   In rx_packet(), status %4.4x, rx_status %4.4x.\n",
printk600drivers/net/3c509.cprintk("Receiving packet size %d status %4.4x.\n",
printk616drivers/net/3c509.cprintk("%s: Couldn't allocate a sk_buff of size %d.\n",
printk622drivers/net/3c509.cprintk("  Waiting for 3c509 to discard packet, status %x.\n",
printk640drivers/net/3c509.cprintk("%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count);
printk662drivers/net/3c509.cprintk("%s: Shutting down ethercard.\n", dev->name);
printk714drivers/net/3c509.cprintk("3c509: WARNING! Module load-time probing works reliably only for EISA-bus!\n");
printk121drivers/net/8390.cprintk(KERN_EMERG "%s: ei_open passed a non-existent device!\n", dev->name);
printk160drivers/net/8390.cprintk("%s: xmit on stopped card\n", dev->name);
printk164drivers/net/8390.cprintk(KERN_DEBUG "%s: Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n",
printk194drivers/net/8390.cprintk("%s: Tx request while isr active.\n",dev->name);
printk208drivers/net/8390.cprintk("%s: idle transmitter tx2=%d, lasttx=%d, txing=%d.\n",
printk215drivers/net/8390.cprintk("%s: idle transmitter, tx1=%d, lasttx=%d, txing=%d.\n",
printk220drivers/net/8390.cprintk("%s: No Tx buffers free. irq=%d tx1=%d tx2=%d last=%d\n",
printk268drivers/net/8390.cprintk ("net_interrupt(): irq %d for unknown device.\n", irq);
printk275drivers/net/8390.cprintk(ei_local->irqlock
printk288drivers/net/8390.cprintk("%s: interrupt(isr=%#2.2x).\n", dev->name,
printk295drivers/net/8390.cprintk("%s: interrupt from stopped card\n", dev->name);
printk331drivers/net/8390.cprintk("%s: Too much work at interrupt, status %#2.2x\n",
printk335drivers/net/8390.cprintk("%s: unknown interrupt %#2x\n", dev->name, interrupts);
printk357drivers/net/8390.cprintk("%s: bogus last_tx_buffer %d, tx1=%d.\n",
printk371drivers/net/8390.cprintk("%s: bogus last_tx_buffer %d, tx2=%d.\n",
printk384drivers/net/8390.cprintk("%s: unexpected TX-done interrupt, lasttx=%d.\n",
printk434drivers/net/8390.cprintk("%s: mismatched read page pointers %2x vs %2x.\n",
printk462drivers/net/8390.cprintk("%s: bogus packet size: %d, status=%#2x nxpg=%#2x.\n",
printk472drivers/net/8390.cprintk("%s: Couldn't allocate a sk_buff of size %d.\n",
printk488drivers/net/8390.cprintk("%s: bogus packet: status=%#2x nxpg=%#2x size=%d\n",
printk498drivers/net/8390.cprintk("%s: next frame inconsistency, %#2x\n", dev->name,
printk531drivers/net/8390.cprintk("%s: Receiver overrun.\n", dev->name);
printk543drivers/net/8390.cprintk("%s: reset did not complete at ei_rx_overrun.\n",
printk600drivers/net/8390.cprintk(version);
printk695drivers/net/8390.cprintk("%s: trigger_send() called with the transmitter busy.\n",
printk119drivers/net/ac3200.cprintk("AC3200 ethercard probe at %#3x:", ioaddr);
printk122drivers/net/ac3200.cprintk(" %02x", inb(ioaddr + AC_SA_PROM + i));
printk131drivers/net/ac3200.cprintk(" not found (invalid prefix).\n");
printk139drivers/net/ac3200.cprintk("EISA ID mismatch, %8x vs %8x.\n",
printk147drivers/net/ac3200.cprintk("ac3200.c: Passed a NULL device.\n");
printk155drivers/net/ac3200.cprintk("\nAC3200 ethercard configuration register is %#02x,"
printk168drivers/net/ac3200.cprintk (" unable to get IRQ %d.\n", dev->irq);
printk174drivers/net/ac3200.cprintk (" unable to allocate memory for dev->priv.\n");
printk206drivers/net/ac3200.cprintk("\n%s: AC3200 at %#x, IRQ %d, %s port, shared memory %#lx-%#lx.\n",
printk211drivers/net/ac3200.cprintk(version);
printk246drivers/net/ac3200.cif (ei_debug > 1) printk("resetting AC3200, t=%ld...", jiffies);
printk250drivers/net/ac3200.cif (ei_debug > 1) printk("reset done\n");
printk300drivers/net/ac3200.cprintk("%s: Shutting down ethercard.\n", dev->name);
printk348drivers/net/ac3200.cprintk(KERN_WARNING "ac3200.c: No ac3200 card found (i/o = 0x%x).\n", io[this_dev]);
printk203drivers/net/apricot.cif (i596_debug > 1) printk ("%s: init_rx_bufs %d.\n", dev->name, num);
printk273drivers/net/apricot.cif (i596_debug > 2) printk("%s: starting i82596.\n", dev->name);
printk282drivers/net/apricot.cprintk("%s: i82596 initialization timed out with status %4.4x, cmd %4.4x.\n",
printk304drivers/net/apricot.cprintk("%s: receive unit start timed out with status %4.4x, cmd %4.4x.\n",
printk316drivers/net/apricot.cprintk("i82596 init timed out with status %4.4x, cmd %4.4x.\n",
printk330drivers/net/apricot.cif (i596_debug > 3) printk ("i596_rx()\n");
printk346drivers/net/apricot.cprintk ("%s: i596_rx Memory squeeze, dropping packet.\n", dev->name);
printk381drivers/net/apricot.cif (i596_debug > 3) printk ("frames %d\n", frames);
printk392drivers/net/apricot.cif (i596_debug > 4) printk ("i596_cleanup_cmd\n");
printk433drivers/net/apricot.cprintk("i596_cleanup_cmd timed out with status %4.4x, cmd %4.4x.\n",
printk446drivers/net/apricot.cif (i596_debug > 4) printk ("i596_reset\n");
printk451drivers/net/apricot.cprintk("i596_reset timed out with status %4.4x, cmd %4.4x.\n",
printk468drivers/net/apricot.cprintk("i596_reset 2 timed out with status %4.4x, cmd %4.4x.\n",
printk489drivers/net/apricot.cif (i596_debug > 4) printk ("i596_add_cmd\n");
printk505drivers/net/apricot.cprintk("i596_add_cmd timed out with status %4.4x, cmd %4.4x.\n",
printk526drivers/net/apricot.cprintk("%s: command unit timed out, status resetting.\n", dev->name);
printk538drivers/net/apricot.cprintk("%s: i596_open() irq %d.\n", dev->name, dev->irq);
printk548drivers/net/apricot.cprintk("%s: only able to allocate %d receive buffers\n", dev->name, i);
printk575drivers/net/apricot.cif (i596_debug > 2) printk ("%s: Apricot start xmit\n", dev->name);
printk582drivers/net/apricot.cprintk("%s: transmit timed out, status resetting.\n",
printk587drivers/net/apricot.cif (i596_debug > 1) printk ("Resetting board.\n");
printk593drivers/net/apricot.cif (i596_debug > 1) printk ("Kicking board.\n");
printk615drivers/net/apricot.cif (i596_debug > 3) printk("%s: i596_start_xmit() called\n", dev->name);
printk620drivers/net/apricot.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk629drivers/net/apricot.cprintk ("%s: i596_xmit Memory squeeze, dropping packet.\n", dev->name);
printk666drivers/net/apricot.cprintk ("Dest  ");
printk668drivers/net/apricot.cprintk(" %2.2X", (unsigned char)add[i]);
printk669drivers/net/apricot.cprintk ("\n");
printk671drivers/net/apricot.cprintk ("Source");
printk673drivers/net/apricot.cprintk(" %2.2X", (unsigned char)add[i+6]);
printk674drivers/net/apricot.cprintk ("\n");
printk675drivers/net/apricot.cprintk ("type %2.2X%2.2X\n", (unsigned char)add[12], (unsigned char)add[13]);
printk714drivers/net/apricot.cprintk("%s: Apricot 82596 at %#3x,", dev->name, ioaddr);
printk717drivers/net/apricot.cprintk(" %2.2X", dev->dev_addr[i] = eth_addr[i]);
printk721drivers/net/apricot.cprintk(" IRQ %d.\n", dev->irq);
printk723drivers/net/apricot.cif (i596_debug > 0) printk(version);
printk755drivers/net/apricot.cprintk ("i596_interrupt(): irq %d for unknown device.\n", irq);
printk759drivers/net/apricot.cif (i596_debug > 3) printk ("%s: i596_interrupt(): irq %d\n",dev->name, irq);
printk762drivers/net/apricot.cprintk("%s: Re-entering the interrupt handler.\n", dev->name);
printk773drivers/net/apricot.cprintk("%s: i596 interrupt, timeout status %4.4x command %4.4x.\n", dev->name, lp->scb.status, lp->scb.command);
printk779drivers/net/apricot.cprintk("%s: i596 interrupt, status %4.4x.\n", dev->name, status);
printk788drivers/net/apricot.cprintk("%s: i596 interrupt completed command.\n", dev->name);
printk790drivers/net/apricot.cprintk("%s: i596 interrupt command unit inactive %x.\n", dev->name, status & 0x0700);
printk842drivers/net/apricot.cprintk("%s: link ok.\n", dev->name);
printk847drivers/net/apricot.cprintk("%s: Transceiver problem.\n", dev->name);
printk849drivers/net/apricot.cprintk("%s: Termination problem.\n", dev->name);
printk851drivers/net/apricot.cprintk("%s: Short circuit.\n", dev->name);
printk853drivers/net/apricot.cprintk("%s: Time %ld.\n", dev->name, status & 0x07ff);
printk877drivers/net/apricot.cprintk("%s: i596 interrupt received a frame.\n", dev->name);
printk879drivers/net/apricot.cprintk("%s: i596 interrupt receive unit inactive %x.\n", dev->name, status & 0x0070);
printk895drivers/net/apricot.cprintk("%s: i596 interrupt, timeout status %4.4x command %4.4x.\n", dev->name, lp->scb.status, lp->scb.command);
printk905drivers/net/apricot.cprintk("%s: exiting interrupt.\n", dev->name);
printk922drivers/net/apricot.cprintk("%s: Shutting down ethercard, status was %4.4x.\n",
printk933drivers/net/apricot.cprintk("%s: close timed timed out with status %4.4x, cmd %4.4x.\n",
printk963drivers/net/apricot.cprintk ("%s: set multicast list %d\n", dev->name, dev->mc_count);
printk972drivers/net/apricot.cprintk ("%s: set_multicast Memory squeeze.\n", dev->name);
printk340drivers/net/arcnet.c#define BUGMSG(x,msg,args...) BUGLVL(x) printk("%6s: " msg, dev->name , ## args);
printk698drivers/net/arcnet.cprintk(version);
printk703drivers/net/arcnet.cprintk("arcnet: ***\n");
printk704drivers/net/arcnet.cprintk("arcnet: * Read README.arcnet for important release notes!\n");
printk705drivers/net/arcnet.cprintk("arcnet: *\n");
printk706drivers/net/arcnet.cprintk("arcnet: * This is an ALPHA version!  (Last stable release: v2.00)  E-mail me if\n");
printk707drivers/net/arcnet.cprintk("arcnet: * you have any questions, comments, or bug reports.\n");
printk708drivers/net/arcnet.cprintk("arcnet: ***\n");
printk713drivers/net/arcnet.cprintk("arcnet: ***\n");
printk714drivers/net/arcnet.cprintk("arcnet: * Read README.arcnet for important release notes!\n");
printk715drivers/net/arcnet.cprintk("arcnet: *\n");
printk716drivers/net/arcnet.cprintk("arcnet: * This version should be stable, but please e-mail\n");
printk717drivers/net/arcnet.cprintk("arcnet: * me if you have any questions or comments.\n");
printk718drivers/net/arcnet.cprintk("arcnet: ***\n");
printk1168drivers/net/arcnet.cprintk("%6s: debug level set to %d\n",dev->name,arcnet_debug);
printk1172drivers/net/arcnet.cBUGLVL(D_EXTRA) printk(version);
printk1428drivers/net/arcnet.cif(i%16 == 0) printk("\n[%04hX] ",i);
printk1429drivers/net/arcnet.cprintk("%02hX ",((unsigned char*)skb->data)[i]);
printk1431drivers/net/arcnet.cprintk("\n");
printk1601drivers/net/arcnet.cprintk("%6s: packet dump [tx] follows:",dev->name);
printk1605drivers/net/arcnet.cprintk("\n[%04X] ",county*16);
printk1607drivers/net/arcnet.cprintk("%02X ",
printk1611drivers/net/arcnet.cprintk("\n");
printk1666drivers/net/arcnet.cif (i%16 == 0) printk("\n[%04hX] ",i);
printk1667drivers/net/arcnet.cprintk("%02hX ",((unsigned char*)skb->data)[i]);
printk1669drivers/net/arcnet.cprintk("\n");
printk1844drivers/net/arcnet.cprintk("%6s: packet dump [tx] follows:",dev->name);
printk1848drivers/net/arcnet.cprintk("\n[%04X] ",county*16);
printk1850drivers/net/arcnet.cprintk("%02X ",
printk1854drivers/net/arcnet.cprintk("\n");
printk1934drivers/net/arcnet.cprintk("arcnet: irq %d for unknown device.\n", irq);
printk2257drivers/net/arcnet.cprintk("%6s: packet dump [rx] follows:",dev->name);
printk2261drivers/net/arcnet.cprintk("\n[%04X] ",county*16);
printk2263drivers/net/arcnet.cprintk("%02X ",
printk2267drivers/net/arcnet.cprintk("\n");
printk2391drivers/net/arcnet.cif( i%16 == 0 ) printk("\n[%04hX] ",i);
printk2392drivers/net/arcnet.cprintk("%02hX ",((unsigned char*)skb->data)[i]);
printk2394drivers/net/arcnet.cprintk("\n");
printk2563drivers/net/arcnet.cif( i%16 == 0 ) printk("\n[%04hX] ",i);
printk2564drivers/net/arcnet.cprintk("%02hX ",((unsigned char*)skb->data)[i]);
printk2566drivers/net/arcnet.cprintk("\n");
printk2608drivers/net/arcnet.cprintk("%6s: rx skb dump follows:\n",dev->name);
printk2612drivers/net/arcnet.cprintk("\n[%04hX] ",i);
printk2614drivers/net/arcnet.cprintk("%02hX ",((u_char *)skb->data)[i]);
printk2616drivers/net/arcnet.cprintk("\n");
printk2670drivers/net/arcnet.cif( i%16 == 0 ) printk("\n[%04hX] ",i);
printk2671drivers/net/arcnet.cprintk("%02hX ",((unsigned char*)skb->data)[i]);
printk2673drivers/net/arcnet.cprintk("\n");
printk179drivers/net/at1700.cprintk("at1700 probe at %#x, eeprom is %4.4x %4.4x %4.4x ctrl %4.4x.\n",
printk196drivers/net/at1700.cprintk ("AT1700 found at %#3x, but it's unusable due to a conflict on"
printk209drivers/net/at1700.cprintk("%s: AT1700 found at %#3x, IRQ %d, address ", dev->name,
printk218drivers/net/at1700.cprintk("%04x", eeprom_val);
printk233drivers/net/at1700.cprintk(" %s interface.\n", porttype[(dev->if_port>>3) & 3]);
printk258drivers/net/at1700.cprintk(version);
printk375drivers/net/at1700.cprintk("%s: transmit timed out with status %04x, %s?\n", dev->name,
printk378drivers/net/at1700.cprintk("%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n",
printk406drivers/net/at1700.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk450drivers/net/at1700.cprintk ("at1700_interrupt(): irq %d for unknown device.\n", irq);
printk461drivers/net/at1700.cprintk("%s: Interrupt with status %04x.\n", dev->name, status);
printk503drivers/net/at1700.cprintk("%s: Rxing packet mode %02x status %04x.\n",
printk523drivers/net/at1700.cprintk("%s: The AT1700 claimed a very large packet, size %d.\n",
printk533drivers/net/at1700.cprintk("%s: Memory squeeze, dropping packet (len %d).\n",
printk566drivers/net/at1700.cprintk("%s: Exint Rx packet with mode %02x after %d ticks.\n", 
printk645drivers/net/at1700.cprintk("at1700: You should not use auto-probing with insmod!\n");
printk649drivers/net/at1700.cprintk("at1700: register_netdev() returned non-zero.\n");
printk216drivers/net/atp.cprintk("%s: Pocket adapter found at %#3lx, IRQ %d, SAPROM "
printk225drivers/net/atp.cprintk(version);
printk356drivers/net/atp.cprintk("%s: Reset: current Rx mode %d.\n", dev->name,
printk427drivers/net/atp.cprintk("%s: transmit timed out, %s?\n", dev->name,
printk448drivers/net/atp.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk495drivers/net/atp.cprintk ("ATP_interrupt(): irq %d for unknown device.\n", irq);
printk510drivers/net/atp.cif (net_debug > 5) printk("%s: In interrupt ", dev->name);
printk513drivers/net/atp.cif (net_debug > 5) printk("loop status %02x..", status);
printk520drivers/net/atp.cprintk("handling Rx packet %02x..", read_status);
printk539drivers/net/atp.cif (net_debug > 6)  printk("handling Tx done..");
printk551drivers/net/atp.cif (net_debug > 6)  printk("attempting to ReTx");
printk570drivers/net/atp.cprintk("%s: Missed packet? No Rx after %d Tx and %ld jiffies"
printk603drivers/net/atp.cif (net_debug > 5) printk("exiting interrupt.\n");
printk660drivers/net/atp.cprintk(" rx_count %04x %04x %04x %04x..", rx_head.pad,
printk666drivers/net/atp.cif (net_debug > 3) printk("%s: Unknown ATP Rx error %04x.\n",
printk677drivers/net/atp.cprintk("%s: Memory squeeze, dropping packet.\n", dev->name);
printk687drivers/net/atp.cprintk(" data %02x%02x%02x %02x%02x%02x %02x%02x%02x"
printk86drivers/net/auto_irq.cprintk(" Spurious interrupt on IRQ %d\n", i);
printk566drivers/net/bsd_comp.cprintk ("<9>ppp: lens_ptr(%d) > max\n", idx);
printk576drivers/net/bsd_comp.cprintk ("<9>ppp: dict_ptr(%d) > max\n", idx);
printk914drivers/net/bsd_comp.cprintk("bsd_decomp%d: bad sequence # %d, expected %d\n",
printk976drivers/net/bsd_comp.cprintk("bsd_decomp%d: bad CLEAR\n", db->unit);
printk990drivers/net/bsd_comp.cprintk("bsd_decomp%d: bad code 0x%x oldcode=0x%x ",
printk992drivers/net/bsd_comp.cprintk("max_ent=0x%x explen=%d seqno=%d\n",
printk1016drivers/net/bsd_comp.cprintk("bsd_decomp%d: ran out of mru\n", db->unit);
printk1018drivers/net/bsd_comp.cprintk("  len=%d, finchar=0x%x, codelen=%d, explen=%d\n",
printk1041drivers/net/bsd_comp.cprintk("bsd_decomp%d: fell off end of chain ", db->unit);
printk1042drivers/net/bsd_comp.cprintk("0x%x at 0x%x by 0x%x, max_ent=0x%x\n",
printk1049drivers/net/bsd_comp.cprintk("bsd_decomp%d: bad code chain 0x%x "
printk1053drivers/net/bsd_comp.cprintk("oldcode=0x%x cptr=0x%x codem1=0x%x\n",
printk1068drivers/net/bsd_comp.cprintk("bsd_decomp%d: short by %d after code 0x%x, max_ent=0x%x\n",
printk1156drivers/net/bsd_comp.cprintk("bsd_decomp%d: peer should have cleared dictionary on %d\n",
printk1193drivers/net/bsd_comp.cprintk (KERN_INFO "PPP BSD Compression module registered\n");
printk498drivers/net/de4x5.cprintk("Autoprobing is not supported when loading a module based driver.\n");
printk505drivers/net/de4x5.cprintk("%s: de4x5_probe() cannot find device at 0x%04lx.\n", dev->name, 
printk558drivers/net/de4x5.cprintk("%s: %s at %04lx (EISA slot %ld)", 
printk561drivers/net/de4x5.cprintk("%s: %s at %04lx (PCI bus %d, device %d)", dev->name, name,
printk565drivers/net/de4x5.cprintk(", h/w address ");
printk568drivers/net/de4x5.cprintk("%2.2x:", dev->dev_addr[i]);
printk570drivers/net/de4x5.cprintk("%2.2x,\n", dev->dev_addr[i]);
printk668drivers/net/de4x5.cprintk("      and failed to detect IRQ line.\n");
printk674drivers/net/de4x5.cprintk("      and uses IRQ%d.\n", dev->irq);
printk679drivers/net/de4x5.cprintk("      but incorrect IRQ line detected.\n");
printk688drivers/net/de4x5.cprintk("      and requires IRQ%d (not probed).\n", dev->irq);
printk691drivers/net/de4x5.cprintk("%s: Kernel could not allocate RX buffer memory.\n", 
printk699drivers/net/de4x5.cprintk("      which has an Ethernet PROM CRC error.\n");
printk711drivers/net/de4x5.cprintk(version);
printk765drivers/net/de4x5.cprintk("de4x5_open(): Requested IRQ%d is busy\n",dev->irq);
printk776drivers/net/de4x5.cprintk("%s: de4x5 open with irq %d\n",dev->name,dev->irq);
printk777drivers/net/de4x5.cprintk("\tphysical address: ");
printk779drivers/net/de4x5.cprintk("%2.2x:",(short)dev->dev_addr[i]);
printk781drivers/net/de4x5.cprintk("\n");
printk782drivers/net/de4x5.cprintk("Descriptor head addresses:\n");
printk783drivers/net/de4x5.cprintk("\t0x%8.8lx  0x%8.8lx\n",(u_long)lp->rx_ring,(u_long)lp->tx_ring);
printk784drivers/net/de4x5.cprintk("Descriptor addresses:\nRX: ");
printk787drivers/net/de4x5.cprintk("0x%8.8lx  ",(u_long)&lp->rx_ring[i].status);
printk790drivers/net/de4x5.cprintk("...0x%8.8lx\n",(u_long)&lp->rx_ring[i].status);
printk791drivers/net/de4x5.cprintk("TX: ");
printk794drivers/net/de4x5.cprintk("0x%8.8lx  ", (u_long)&lp->tx_ring[i].status);
printk797drivers/net/de4x5.cprintk("...0x%8.8lx\n", (u_long)&lp->tx_ring[i].status);
printk798drivers/net/de4x5.cprintk("Descriptor buffers:\nRX: ");
printk801drivers/net/de4x5.cprintk("0x%8.8x  ",lp->rx_ring[i].buf);
printk804drivers/net/de4x5.cprintk("...0x%8.8x\n",lp->rx_ring[i].buf);
printk805drivers/net/de4x5.cprintk("TX: ");
printk808drivers/net/de4x5.cprintk("0x%8.8x  ", lp->tx_ring[i].buf);
printk811drivers/net/de4x5.cprintk("...0x%8.8x\n", lp->tx_ring[i].buf);
printk812drivers/net/de4x5.cprintk("Ring size: \nRX: %d\nTX: %d\n", 
printk815drivers/net/de4x5.cprintk("\tstatus:  %d\n", status);
printk837drivers/net/de4x5.cprintk("\tsts:  0x%08x\n", inl(DE4X5_STS));
printk838drivers/net/de4x5.cprintk("\tbmr:  0x%08x\n", inl(DE4X5_BMR));
printk839drivers/net/de4x5.cprintk("\timr:  0x%08x\n", inl(DE4X5_IMR));
printk840drivers/net/de4x5.cprintk("\tomr:  0x%08x\n", inl(DE4X5_OMR));
printk841drivers/net/de4x5.cprintk("\tsisr: 0x%08x\n", inl(DE4X5_SISR));
printk842drivers/net/de4x5.cprintk("\tsicr: 0x%08x\n", inl(DE4X5_SICR));
printk843drivers/net/de4x5.cprintk("\tstrr: 0x%08x\n", inl(DE4X5_STRR));
printk844drivers/net/de4x5.cprintk("\tsigr: 0x%08x\n", inl(DE4X5_SIGR));
printk918drivers/net/de4x5.cprintk("%s: Setup frame timed out, status %08x\n", dev->name, 
printk969drivers/net/de4x5.cprintk("%s: transmit timed out, status %08x, tbusy:%ld, lostMedia:%d tickssofar:%ld, resetting.\n",dev->name, inl(DE4X5_STS), dev->tbusy, lp->lostMedia, tickssofar);
printk1019drivers/net/de4x5.cprintk("%s: hardware initialisation failure, status %08x.\n",
printk1030drivers/net/de4x5.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk1076drivers/net/de4x5.cprintk ("de4x5_interrupt(): irq %d for unknown device.\n", irq);
printk1082drivers/net/de4x5.cprintk("%s: Re-entering the interrupt handler.\n", dev->name);
printk1107drivers/net/de4x5.cprintk("%s: Fatal bus error occured, sts=%#8x, device stopped.\n",
printk1190drivers/net/de4x5.cprintk("%s: Insufficient memory; nuking packet.\n", dev->name);
printk1321drivers/net/de4x5.cprintk("%s: Shutting down ethercard, status was %8.8x.\n",
printk1528drivers/net/de4x5.cprintk("%s: region already allocated at 0x%04lx.\n", dev->name, iobase);
printk1616drivers/net/de4x5.cprintk("%s: region already allocated at 0x%04x.\n", dev->name, (u_short)iobase);
printk1670drivers/net/de4x5.cprintk("eth%d: Device not initialised, insufficient memory\n",
printk1709drivers/net/de4x5.cprintk("%s: Insufficient memory to extend the device list.\n", 
printk1753drivers/net/de4x5.cprintk("%s: Searching for media... ",dev->name);
printk1755drivers/net/de4x5.cprintk("%s: Searching for mode... ",dev->name);
printk1773drivers/net/de4x5.cprintk("media is %s\n", (lp->media == NC  ? "unconnected!" :
printk1781drivers/net/de4x5.cprintk("mode is %s\n",(lp->media == NC      ? "link down.":
printk2362drivers/net/de4x5.cprintk("Bad SROM address phase.....\n");
printk2567drivers/net/de4x5.cprintk("%s: Boo!\n", dev->name);
printk86drivers/net/de600.c#define PRINTK(x) if (de600_debug >= 2) printk x
printk340drivers/net/de600.cprintk ("%s: unable to get IRQ %d\n", dev->name, DE600_IRQ);
printk422drivers/net/de600.cprintk("%s: transmit timed out (%d), %s?\n",
printk500drivers/net/de600.cprintk("%s: bogus interrupt %d\n", dev?dev->name:"DE-600", irq);
printk599drivers/net/de600.cprintk("%s: Bogus packet size %d.\n", dev->name, size);
printk608drivers/net/de600.cprintk("%s: Couldn't allocate a sk_buff of size %d.\n",
printk644drivers/net/de600.cprintk("%s: D-Link DE-600 pocket adapter", dev->name);
printk647drivers/net/de600.cprintk(version);
printk656drivers/net/de600.cprintk(": not at I/O %#3x.\n", DATA_PORT);
printk681drivers/net/de600.cprintk(" not identified in the printer port\n");
printk687drivers/net/de600.cprintk(", port 0x%x busy\n", DE600_IO);
printk693drivers/net/de600.cprintk(", Ethernet Address: %02X", dev->dev_addr[0]);
printk695drivers/net/de600.cprintk(":%02X",dev->dev_addr[i]);
printk696drivers/net/de600.cprintk("\n");
printk738drivers/net/de600.cprintk("Something has happened to the DE-600!  Please check it"
printk755drivers/net/de600.cprintk("Thanks, I feel much better now!\n");
printk168drivers/net/de620.c#define PRINTK(x) if (de620_debug >= 2) printk x
printk329drivers/net/de620.cprintk("WRITE(%d)\n", tot_cnt/((bytes?bytes:1)));
printk365drivers/net/de620.cprintk("READ(%d)\n", tot_cnt/(2*(bytes?bytes:1)));
printk436drivers/net/de620.cprintk ("%s: unable to get IRQ %d\n", dev->name, dev->irq);
printk540drivers/net/de620.cprintk("%s: transmit timed out (%d), %s?\n",
printk576drivers/net/de620.cprintk("de620: Ouch! No tx-buffer available!\n");
printk610drivers/net/de620.cprintk("%s: bogus interrupt %d\n", dev?dev->name:"de620", irq_in);
printk674drivers/net/de620.cprintk("%s: Ring overrun? Restoring...\n", dev->name);
printk693drivers/net/de620.cprintk("%s: Page link out of sync! Restoring...\n", dev->name);
printk704drivers/net/de620.cprintk("%s: Illegal packet size: %d!\n", dev->name, size);
printk709drivers/net/de620.cprintk("%s: Couldn't allocate a sk_buff of size %d.\n",
printk798drivers/net/de620.cprintk("Something has happened to the DE-620!  Please check it"
printk812drivers/net/de620.cprintk("Thanks, I feel much better now!\n");
printk846drivers/net/de620.cprintk(version);
printk848drivers/net/de620.cprintk("D-Link DE-620 pocket adapter");
printk859drivers/net/de620.cprintk(" not identified in the printer port\n");
printk865drivers/net/de620.cprintk(", port 0x%x busy\n", dev->base_addr);
printk872drivers/net/de620.cprintk(", Ethernet Address: %2.2X",
printk875drivers/net/de620.cprintk(":%2.2X", dev->dev_addr[i] = nic_data.NodeID[i]);
printk879drivers/net/de620.cprintk(" (%dk RAM,",
printk883drivers/net/de620.cprintk(" BNC)\n");
printk885drivers/net/de620.cprintk(" UTP)\n");
printk903drivers/net/de620.cprintk("\nEEPROM contents:\n");
printk904drivers/net/de620.cprintk("RAM_Size = 0x%02X\n", nic_data.RAM_Size);
printk905drivers/net/de620.cprintk("NodeID = %02X:%02X:%02X:%02X:%02X:%02X\n",
printk909drivers/net/de620.cprintk("Model = %d\n", nic_data.Model);
printk910drivers/net/de620.cprintk("Media = %d\n", nic_data.Media);
printk911drivers/net/de620.cprintk("SCR = 0x%02x\n", nic_data.SCR);
printk418drivers/net/depca.cprintk("Autoprobing is not supported when loading a module based driver.\n");
printk425drivers/net/depca.cprintk("%s: depca_probe() cannot find device at 0x%04lx.\n", dev->name, 
printk467drivers/net/depca.cprintk("%s: %s at 0x%04lx (EISA slot %d)", 
printk470drivers/net/depca.cprintk("%s: %s at 0x%04lx", dev->name, name, ioaddr);
printk473drivers/net/depca.cprintk(", h/w address ");
printk476drivers/net/depca.cprintk("%2.2x:", dev->dev_addr[i]);
printk478drivers/net/depca.cprintk("%2.2x", dev->dev_addr[i]);
printk497drivers/net/depca.cprintk(",\n      has %dkB RAM at 0x%.5lx", netRAM, mem_start);
printk586drivers/net/depca.cprintk("      and failed to detect IRQ line.\n");
printk592drivers/net/depca.cprintk("      and uses IRQ%d.\n", dev->irq);
printk597drivers/net/depca.cprintk("      but incorrect IRQ line detected.\n");
printk603drivers/net/depca.cprintk(" and assigned IRQ%d.\n", dev->irq);
printk607drivers/net/depca.cprintk(",\n      requests %dkB RAM: only %dkB is available!\n", 
printk612drivers/net/depca.cprintk("      which has an Ethernet PROM CRC error.\n");
printk618drivers/net/depca.cprintk(version);
printk657drivers/net/depca.cprintk("depca_open(): Requested IRQ%d is busy\n",dev->irq);
printk679drivers/net/depca.cprintk("%s: depca open with irq %d\n",dev->name,dev->irq);
printk680drivers/net/depca.cprintk("Descriptor head addresses:\n");
printk681drivers/net/depca.cprintk("\t0x%lx  0x%lx\n",(u_long)lp->rx_ring, (u_long)lp->tx_ring);
printk682drivers/net/depca.cprintk("Descriptor addresses:\nRX: ");
printk685drivers/net/depca.cprintk("0x%8.8lx ", (long) &lp->rx_ring[i].base);
printk688drivers/net/depca.cprintk("...0x%8.8lx\n", (long) &lp->rx_ring[i].base);
printk689drivers/net/depca.cprintk("TX: ");
printk692drivers/net/depca.cprintk("0x%8.8lx ", (long) &lp->tx_ring[i].base);
printk695drivers/net/depca.cprintk("...0x%8.8lx\n", (long) &lp->tx_ring[i].base);
printk696drivers/net/depca.cprintk("\nDescriptor buffers:\nRX: ");
printk699drivers/net/depca.cprintk("0x%8.8lx  ", readl(&lp->rx_ring[i].base));
printk702drivers/net/depca.cprintk("...0x%8.8lx\n", readl(&lp->rx_ring[i].base));
printk703drivers/net/depca.cprintk("TX: ");
printk706drivers/net/depca.cprintk("0x%8.8lx  ", readl(&lp->tx_ring[i].base));
printk709drivers/net/depca.cprintk("...0x%8.8lx\n", readl(&lp->tx_ring[i].base));
printk710drivers/net/depca.cprintk("Status:  %d\n", status);
printk711drivers/net/depca.cprintk("Initialisation block at 0x%8.8lx\n",lp->sh_mem);
printk712drivers/net/depca.cprintk("\tmode: 0x%4.4lx\n",readw(&p->mode));
printk713drivers/net/depca.cprintk("\tphysical address: ");
printk715drivers/net/depca.cprintk("%2.2x:",(u_char)readb(&p->phys_addr[i]));
printk717drivers/net/depca.cprintk("%2.2x\n",(u_char)readb(&p->phys_addr[i]));
printk718drivers/net/depca.cprintk("\tmulticast hash table: ");
printk720drivers/net/depca.cprintk("%2.2x:",(u_char)readb(&p->mcast_table[i]));
printk722drivers/net/depca.cprintk("%2.2x\n",(u_char)readb(&p->mcast_table[i]));
printk723drivers/net/depca.cprintk("\trx_ring at: 0x%8.8lx\n",readl(&p->rx_ring));
printk724drivers/net/depca.cprintk("\ttx_ring at: 0x%8.8lx\n",readl(&p->tx_ring));
printk725drivers/net/depca.cprintk("dma_buffs: 0x%8.8lx\n",lp->dma_buffs);
printk726drivers/net/depca.cprintk("Ring size:\nRX: %d  Log2(rxRingMask): 0x%8.8x\n", 
printk729drivers/net/depca.cprintk("TX: %d  Log2(txRingMask): 0x%8.8x\n", 
printk733drivers/net/depca.cprintk("CSR2&1: 0x%4.4x",inw(DEPCA_DATA));
printk735drivers/net/depca.cprintk("%4.4x\n",inw(DEPCA_DATA));
printk737drivers/net/depca.cprintk("CSR3: 0x%4.4x\n",inw(DEPCA_DATA));
printk752drivers/net/depca.cprintk("CSR0: 0x%4.4x\n",inw(DEPCA_DATA));
printk753drivers/net/depca.cprintk("nicsr: 0x%02x\n",inb(DEPCA_NICSR));
printk818drivers/net/depca.cprintk("%s: transmit timed out, status %04x, resetting.\n",
printk836drivers/net/depca.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk874drivers/net/depca.cprintk ("depca_interrupt(): irq %d for unknown device.\n", irq);
printk880drivers/net/depca.cprintk("%s: Re-entering the interrupt handler.\n", dev->name);
printk988drivers/net/depca.cprintk("%s: Memory squeeze, deferring packet.\n", dev->name);
printk1064drivers/net/depca.cprintk("%s: Shutting down ethercard, status was %2.2x.\n",
printk1130drivers/net/depca.cprintk("%s: DEPCA open after %d ticks, init block 0x%08lx csr0 %4.4x.\n",
printk1134drivers/net/depca.cprintk("%s: DEPCA unopen after %d ticks, init block 0x%08lx csr0 %4.4x.\n",
printk1270drivers/net/depca.cprintk("%s: region already allocated at 0x%04x.\n", dev->name,ports[i]);
printk1313drivers/net/depca.cprintk("%s: region already allocated at 0x%04lx.\n",dev->name,iobase);
printk1363drivers/net/depca.cprintk("eth%d: Device not initialised, insufficient memory\n",
printk1402drivers/net/depca.cprintk("%s: Insufficient memory to extend the device list.\n", 
printk1738drivers/net/depca.cprintk("%s: Boo!\n", dev->name);
printk1834drivers/net/depca.cprintk("depca: You should not use auto-probing with insmod!\n");
printk165drivers/net/e2100.cprintk(version);
printk169drivers/net/e2100.cprintk("e2100.c: Passed a NULL device.\n");
printk173drivers/net/e2100.cprintk("%s: E21** at %#3x,", dev->name, ioaddr);
printk175drivers/net/e2100.cprintk(" %02X", station_addr[i]);
printk185drivers/net/e2100.cprintk(" unable to get IRQ %d.\n", dev->irq);
printk193drivers/net/e2100.cprintk (" unable to get memory for dev->priv.\n");
printk237drivers/net/e2100.cprintk(", IRQ %d, %s media, memory @ %#lx.\n", dev->irq,
printk281drivers/net/e2100.cif (ei_debug > 1) printk("resetting the E2180x3 t=%ld...", jiffies);
printk286drivers/net/e2100.cif (ei_debug > 1) printk("reset done\n");
printk353drivers/net/e2100.cprintk("%s: Shutting down ethercard.\n", dev->name);
printk418drivers/net/e2100.cprintk(KERN_NOTICE "e2100.c: Presently autoprobing (not recommended) for a single card.\n");
printk421drivers/net/e2100.cprintk(KERN_WARNING "e2100.c: No E2100 card found (i/o = 0x%x).\n", io[this_dev]);
printk337drivers/net/eepro.cprintk("%s: Intel 82595-based lan card at %#x,", 
printk342drivers/net/eepro.cprintk("%s: Intel EtherExpress Pro/10 at %#x,", 
printk351drivers/net/eepro.cprintk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]);
printk369drivers/net/eepro.cprintk(" illegal interrupt vector stored in EEPROM.\n");
printk377drivers/net/eepro.cprintk(", IRQ %d, %s.\n", dev->irq,
printk380drivers/net/eepro.cprintk("%s: unable to get IRQ %d.\n", dev->name, dev->irq);
printk384drivers/net/eepro.celse printk(", %s.\n", ifmap[dev->if_port]);
printk392drivers/net/eepro.cprintk("%s: Concurrent Processing is enabled but not used!\n",
printk397drivers/net/eepro.cprintk(version);
printk426drivers/net/eepro.cprintk ("EtherExpress Pro probed failed!\n");
printk505drivers/net/eepro.cprintk("eepro: entering eepro_open routine.\n");
printk515drivers/net/eepro.cprintk("%s: unable to get IRQ %d.\n", dev->name, dev->irq);
printk586drivers/net/eepro.cprintk("eepro: exiting eepro_open routine.\n");
printk601drivers/net/eepro.cprintk("eepro: entering eepro_send_packet routine.\n");
printk610drivers/net/eepro.cprintk("%s: transmit timed out, %s?\n", dev->name,
printk640drivers/net/eepro.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk655drivers/net/eepro.cprintk("eepro: exiting eepro_send_packet routine.\n");
printk670drivers/net/eepro.cprintk("eepro: entering eepro_interrupt routine.\n");
printk673drivers/net/eepro.cprintk ("eepro_interrupt(): irq %d for unknown device.\n", irq);
printk685drivers/net/eepro.cprintk("eepro: packet received interrupt.\n");
printk695drivers/net/eepro.cprintk("eepro: packet transmit interrupt.\n");
printk709drivers/net/eepro.cprintk("eepro: exiting eepro_interrupt routine.\n");
printk797drivers/net/eepro.cprintk("%s: promiscuous mode enabled.\n", dev->name);
printk868drivers/net/eepro.cprintk("%s: multicast setup failed.\n", 
printk872drivers/net/eepro.cprintk("%s: set Rx mode to %d addresses.\n", 
printk941drivers/net/eepro.cprintk("eepro: entering hardware_send_packet routine.\n");
printk1015drivers/net/eepro.cprintk("eepro: exiting hardware_send_packet routine.\n");
printk1020drivers/net/eepro.cprintk("eepro: exiting hardware_send_packet routine.\n");
printk1033drivers/net/eepro.cprintk("eepro: entering eepro_rx routine.\n");
printk1051drivers/net/eepro.cprintk("%s: Memory squeeze, dropping packet.\n", dev->name);
printk1073drivers/net/eepro.cprintk("%s: event = %#x, status = %#x, next = %#x, size = %#x\n", 
printk1092drivers/net/eepro.cprintk("eepro: exiting eepro_rx routine.\n");
printk1122drivers/net/eepro.cprintk("%s: XMT status = %#x\n",
printk1150drivers/net/eepro.cprintk("eepro: You should not use auto-probing with insmod!\n");
printk326drivers/net/eexpress.cprintk("EtherExpress ID checksum is %04x.\n", sum);
printk346drivers/net/eexpress.cprintk("%s: EtherExpress at %#x,", dev->name, ioaddr);
printk356drivers/net/eexpress.cprintk(" rejected (invalid address %04x%04x%04x).\n",
printk367drivers/net/eexpress.cprintk(" %02x", dev->dev_addr[i]);
printk381drivers/net/eexpress.cprintk(", IRQ %d, Interface %s.\n", dev->irq, ifmap[dev->if_port]);
printk394drivers/net/eexpress.cprintk(version);
printk462drivers/net/eexpress.cprintk("%s: transmit timed out, %s?  ", dev->name,
printk468drivers/net/eexpress.cif (net_debug > 1) printk("Resetting board.\n");
printk473drivers/net/eexpress.cif (net_debug > 1) printk("Kicking board.\n");
printk492drivers/net/eexpress.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk524drivers/net/eexpress.cprintk ("net_interrupt(): irq %d for unknown device.\n", irq);
printk535drivers/net/eexpress.cprintk("%s: EExp interrupt, status %4.4x.\n", dev->name, status);
printk547drivers/net/eexpress.cif (net_debug > 5)  printk("Couldn't reap %#x.\n", lp->tx_reap);
printk563drivers/net/eexpress.cprintk("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status);
printk573drivers/net/eexpress.cprintk("Received packet, rx_head %04x.\n", lp->rx_head);
printk583drivers/net/eexpress.cprintk("%s: Command unit stopped, status %04x, restarting.\n",
printk606drivers/net/eexpress.cprintk("%s: Rx unit stopped status %04x rx head %04x tail %04x.\n",
printk610drivers/net/eexpress.cprintk("  Rx buf at %04x:", cur_rxbuf);
printk613drivers/net/eexpress.cprintk(" %04x", inw(ioaddr));
printk614drivers/net/eexpress.cprintk(".\n");
printk628drivers/net/eexpress.cprintk("%s: EExp exiting interrupt, status %4.4x.\n", dev->name,
printk785drivers/net/eexpress.cprintk("%s: i82586 initialization timed out with status %04x, cmd %04x.\n",
printk796drivers/net/eexpress.cprintk("%s: Initialized 82586, status %04x.\n", dev->name,
printk882drivers/net/eexpress.cprintk("%s: EExp @%x send length = %d, tx_block %3x, next %3x, "
printk916drivers/net/eexpress.cprintk("%s: Rx frame at %#x corrupted, status %04x cmd %04x"
printk935drivers/net/eexpress.cprintk("%s: Memory squeeze, dropping packet.\n", dev->name);
printk958drivers/net/eexpress.cprintk("%s: Rx next frame at %#x is %#x instead of %#x.\n", dev->name,
printk971drivers/net/eexpress.cprintk("%s: Rx buf link mismatch, at %04x link %04x instead of %04x.\n",
printk1008drivers/net/eexpress.cprintk("eexpress: You should not use auto-probing with insmod!\n");
printk214drivers/net/eql.cprintk(version);
printk277drivers/net/eql.cprintk ("%s: open\n", dev->name);
printk290drivers/net/eql.cprintk ("%s: adding timer\n", dev->name);
printk309drivers/net/eql.cprintk ("%s: close\n", dev->name);
printk313drivers/net/eql.cprintk ("%s: stopping timer\n", dev->name);
printk376drivers/net/eql.cprintk ("%s: %d slaves xmitng %ld B %s\n", 
printk447drivers/net/eql.cprintk ("%s: enslave '%s' %ld bps\n", dev->name, 
printk496drivers/net/eql.cprintk ("%s: emancipate `%s`\n", dev->name, srq.slave_name);
printk533drivers/net/eql.cprintk ("%s: get config for slave `%s'\n", dev->name, sc.slave_name);
printk572drivers/net/eql.cprintk ("%s: set config for slave `%s'\n", dev->name, sc.slave_name);
printk604drivers/net/eql.cprintk ("%s: get master config\n", dev->name);
printk637drivers/net/eql.cprintk ("%s: set master config\n", dev->name);
printk970drivers/net/eql.cprintk ("%s: schedule %d slaves\n", 
printk1038drivers/net/eql.cprintk ("eql: scheduler found dead slave, burying...\n");
printk1058drivers/net/eql.cprintk ("eql: find_slave_dev; looked at '%s'...\n", slave->dev->name);
printk1060drivers/net/eql.cprintk ("eql: find_slave_dev; looked at nothing...\n");
printk1101drivers/net/eql.cprintk ("eql: lock == %d\n", queue->lock);
printk1104drivers/net/eql.cprintk ("eql: lock_slave-q sleeping for lock\n");
printk1106drivers/net/eql.cprintk ("eql: lock_slave-q woken up\n");
printk1122drivers/net/eql.cprintk ("eql: unlock_slave-q waking up lock waiters\n");
printk1173drivers/net/eql.cprintk ("eql: timer found dead slave, burying...\n");
printk1193drivers/net/eql.cprintk("eql: register_netdev() returned non-zero.\n");
printk350drivers/net/eth16i.cprintk("Probing started for %s\n", cardname);
printk418drivers/net/eth16i.cprintk(version);
printk427drivers/net/eth16i.cprintk("%s: %s at %#3x, but is unusable due 
printk432drivers/net/eth16i.cprintk("%s: %s at %#3x, IRQ %d, ", 
printk483drivers/net/eth16i.cprintk("%02x", inb(ioaddr + NODE_ID_0 + i));
printk485drivers/net/eth16i.cprintk(":");
printk527drivers/net/eth16i.cprintk(" %s interface.\n", porttype[dev->if_port]);
printk568drivers/net/eth16i.cprintk("Set port number %d\n", i);
printk575drivers/net/eth16i.cprintk("Eth16i interface port found at %d\n", i);
printk581drivers/net/eth16i.cprintk("TRANSMIT_DONE timeout\n");
printk586drivers/net/eth16i.cprintk("Using default port\n");
printk617drivers/net/eth16i.cprintk("TRANSMIT_MODE_REG = %x\n", inb(ioaddr + TRANSMIT_MODE_REG));
printk618drivers/net/eth16i.cprintk("TRANSCEIVER_MODE_REG = %x\n", inb(ioaddr+TRANSCEIVER_MODE_REG));
printk653drivers/net/eth16i.cprintk("Timeout occured waiting transmit packet received\n");
printk658drivers/net/eth16i.cprintk("Timeout occured waiting receive packet\n");
printk664drivers/net/eth16i.cprintk("RECEIVE_PACKET\n");
printk670drivers/net/eth16i.cprintk("TRANSMIT_PACKET_RECEIVED %x\n", inb(ioaddr + TX_STATUS_REG));
printk671drivers/net/eth16i.cprintk("RX_STATUS_REG = %x\n", inb(ioaddr + RX_STATUS_REG));
printk705drivers/net/eth16i.cprintk("eth16i: read signature byte %x at %x\n", creg[i],
printk806drivers/net/eth16i.cprintk("%s: transmit buffer size %d\n", dev->name, lp->tx_buf_size);
printk874drivers/net/eth16i.cprintk("%s: transmit timed out with status %04x, %s ?\n", dev->name,
printk881drivers/net/eth16i.cprintk("%s: timeout regs: %02x %02x %02x %02x %02x %02x %02x %02x.\n",
printk887drivers/net/eth16i.cprintk("lp->tx_queue = %d\n", lp->tx_queue);
printk888drivers/net/eth16i.cprintk("lp->tx_queue_len = %d\n", lp->tx_queue_len);
printk889drivers/net/eth16i.cprintk("lp->tx_started = %d\n", lp->tx_started);
printk930drivers/net/eth16i.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk991drivers/net/eth16i.cprintk("%s: Receiving packet mode %02x status %04x.\n", 
printk1009drivers/net/eth16i.cprintk("%s: %s claimed a very large packet, size of %d bytes.\n", 
printk1018drivers/net/eth16i.cprintk("%s: Could'n allocate memory for packet (len %d)\n", 
printk1057drivers/net/eth16i.cprintk("%s: Received packet of length %d.\n", dev->name, pkt_len);
printk1059drivers/net/eth16i.cprintk(" %02x", skb->data[i]);
printk1060drivers/net/eth16i.cprintk(".\n");
printk1082drivers/net/eth16i.cprintk("%s: Flushed receive buffer.\n", dev->name);
printk1097drivers/net/eth16i.cprintk("eth16i_interrupt(): irq %d for unknown device. \n", irq);
printk1112drivers/net/eth16i.cprintk("%s: Interrupt with status %04x.\n", dev->name, status);
printk1192drivers/net/eth16i.cprintk("eth16i: You should not use auto-probing with insmod!\n");
printk1197drivers/net/eth16i.cprintk("eth16i: register_netdev() returned non-zero.\n");
printk357drivers/net/ewrk3.cprintk("ewrk3_probe(): No device found\n");
printk362drivers/net/ewrk3.cprintk("%s: ewrk3_probe(): Detected a device already registered at 0x%02x\n", dev->name, base_addr);
printk373drivers/net/ewrk3.cprintk("Autoprobing is not supported when loading a module based driver.\n");
printk436drivers/net/ewrk3.cprintk("%s: Device has a bad on-board EEPROM.\n", dev->name);
printk456drivers/net/ewrk3.cprintk("%s: %s at %#3x", dev->name, name, iobase);
printk460drivers/net/ewrk3.cprintk("%s: %s at %#3x (EISA slot %d)", 
printk463drivers/net/ewrk3.cprintk("%s: %s at %#3x", dev->name, name, iobase);
printk467drivers/net/ewrk3.cprintk(", h/w address ");
printk470drivers/net/ewrk3.cprintk("%2.2x:", dev->dev_addr[i] = 
printk474drivers/net/ewrk3.cprintk("%2.2x,\n",dev->dev_addr[i] = eeprom_image[EEPROM_PADDR0 + i]);
printk479drivers/net/ewrk3.cprintk("%2.2x:", dev->dev_addr[i] = inb(EWRK3_APROM));
printk482drivers/net/ewrk3.cprintk("%2.2x,\n", dev->dev_addr[i] = inb(EWRK3_APROM));
printk487drivers/net/ewrk3.cprintk("      which has an EEPROM CRC error.\n");
printk537drivers/net/ewrk3.cprintk("      is hard strapped.\n");
printk539drivers/net/ewrk3.cprintk("      has a %dk RAM window", (int)(shmem_length >> 10));
printk540drivers/net/ewrk3.cprintk(" at 0x%.5lx", mem_start);
printk542drivers/net/ewrk3.cprintk("      is in I/O only mode");
printk589drivers/net/ewrk3.cprintk(" and uses IRQ%d.\n", dev->irq);
printk592drivers/net/ewrk3.cprintk(" and failed to detect IRQ line.\n");
printk594drivers/net/ewrk3.cprintk(" and an illegal IRQ line detected.\n");
printk596drivers/net/ewrk3.cprintk(", but incorrect IRQ line detected.\n");
printk605drivers/net/ewrk3.cprintk(" and requires IRQ%d.\n", dev->irq);
printk620drivers/net/ewrk3.cprintk(version);
printk659drivers/net/ewrk3.cprintk("ewrk3_open(): Requested IRQ%d is busy\n",dev->irq);
printk671drivers/net/ewrk3.cprintk("%s: ewrk3 open with irq %d\n",dev->name,dev->irq);
printk672drivers/net/ewrk3.cprintk("\tphysical address: ");
printk674drivers/net/ewrk3.cprintk("%2.2x:",(short)dev->dev_addr[i]);
printk676drivers/net/ewrk3.cprintk("\n");
printk677drivers/net/ewrk3.cprintk("\tchecked memory: 0x%08lx\n",mem_chkd);
printk679drivers/net/ewrk3.cprintk("\tno shared memory, I/O only mode\n");
printk681drivers/net/ewrk3.cprintk("\tstart of shared memory: 0x%08lx\n",lp->shmem_base);
printk682drivers/net/ewrk3.cprintk("\twindow length: 0x%04lx\n",lp->shmem_length);
printk684drivers/net/ewrk3.cprintk("\t# of DRAMS: %d\n",((inb(EWRK3_CMR) & 0x02) ? 2 : 1));
printk685drivers/net/ewrk3.cprintk("\tcsr:  0x%02x\n", inb(EWRK3_CSR));
printk686drivers/net/ewrk3.cprintk("\tcr:   0x%02x\n", inb(EWRK3_CR));
printk687drivers/net/ewrk3.cprintk("\ticr:  0x%02x\n", inb(EWRK3_ICR));
printk688drivers/net/ewrk3.cprintk("\tcmr:  0x%02x\n", inb(EWRK3_CMR));
printk689drivers/net/ewrk3.cprintk("\tfmqc: 0x%02x\n", inb(EWRK3_FMQC));
printk706drivers/net/ewrk3.cprintk("%s: ewrk3 available for hard strapped set up only.\n", dev->name);
printk707drivers/net/ewrk3.cprintk("      Run the 'ewrk3setup' utility or remove the hard straps.\n");
printk771drivers/net/ewrk3.cprintk("%s: transmit timed/locked out, status %04x, resetting.\n",
printk803drivers/net/ewrk3.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk834drivers/net/ewrk3.cprintk("%s: Oops - your private data area is hosed!\n",dev->name);
printk884drivers/net/ewrk3.cprintk("ewrk3_queue_pkt(): Invalid free memory page (%d).\n",
printk888drivers/net/ewrk3.cprintk("ewrk3_queue_pkt(): No free resources...\n");
printk889drivers/net/ewrk3.cprintk("ewrk3_queue_pkt(): CSR: %02x ICR: %02x FMQC: %02x\n",inb(EWRK3_CSR),inb(EWRK3_ICR),inb(EWRK3_FMQC));
printk915drivers/net/ewrk3.cprintk ("ewrk3_interrupt(): irq %d for unknown device.\n", irq);
printk921drivers/net/ewrk3.cprintk("%s: Re-entering the interrupt handler.\n", dev->name);
printk1011drivers/net/ewrk3.cprintk("%s: Oops - your private data area is hosed!\n",dev->name);
printk1086drivers/net/ewrk3.cprintk("%s: Insufficient memory; nuking packet.\n", dev->name);
printk1106drivers/net/ewrk3.cprintk("ewrk3_rx(): Illegal page number, page %d\n",page);
printk1107drivers/net/ewrk3.cprintk("ewrk3_rx(): CSR: %02x ICR: %02x FMQC: %02x\n",inb(EWRK3_CSR),inb(EWRK3_ICR),inb(EWRK3_FMQC));
printk1162drivers/net/ewrk3.cprintk("%s: Shutting down ethercard, status was %2.2x.\n",
printk1389drivers/net/ewrk3.cprintk("%s: ewrk3_probe(): Detected a device already registered at 0x%02x\n", dev->name, iobase);
printk1457drivers/net/ewrk3.cprintk("eth%d: Device not initialised, insufficient memory\n",
printk1705drivers/net/ewrk3.cprintk("%s: Boo!\n", dev->name);
printk162drivers/net/hp-plus.cprintk("hp-plus.c: Passed a NULL device.\n");
printk167drivers/net/hp-plus.cprintk(version);
printk169drivers/net/hp-plus.cprintk("%s: %s at %#3x,", dev->name, name, ioaddr);
printk178drivers/net/hp-plus.cprintk(" %2.2x", inval);
printk183drivers/net/hp-plus.cprintk(" bad checksum %2.2x.\n", checksum);
printk188drivers/net/hp-plus.cprintk(" ID %4.4x", inw(ioaddr + 12));
printk193drivers/net/hp-plus.cprintk ("hp-plus.c: unable to allocate memory for dev->priv.\n");
printk209drivers/net/hp-plus.cprintk(", IRQ %d, memory address %#x.\n", irq, mem_start);
printk212drivers/net/hp-plus.cprintk(", IRQ %d, programmed-I/O mode.\n", irq);
printk306drivers/net/hp-plus.cif (ei_debug > 1) printk("resetting the 8390 time=%ld...", jiffies);
printk319drivers/net/hp-plus.cprintk("%s: hp_reset_8390() did not complete.\n", dev->name);
printk321drivers/net/hp-plus.cif (ei_debug > 1) printk("8390 reset done (%ld).", jiffies);
printk443drivers/net/hp-plus.cprintk(KERN_NOTICE "hp-plus.c: Presently autoprobing (not recommended) for a single card.\n");
printk446drivers/net/hp-plus.cprintk(KERN_WARNING "hp-plus.c: No HP-Plus card found (i/o = 0x%x).\n", io[this_dev]);
printk134drivers/net/hp.cprintk("hp.c: Passed a NULL device.\n");
printk139drivers/net/hp.cprintk(version);
printk141drivers/net/hp.cprintk("%s: %s (ID %02x) at %#3x,", dev->name, name, board_id, ioaddr);
printk144drivers/net/hp.cprintk(" %2.2x", dev->dev_addr[i] = inb(ioaddr + i));
printk160drivers/net/hp.cprintk(" selecting IRQ %d.\n", irq);
printk167drivers/net/hp.cprintk(" no free IRQ lines.\n");
printk174drivers/net/hp.cprintk (" unable to get IRQ %d.\n", dev->irq);
printk181drivers/net/hp.cprintk (" unable to get memory for dev->priv.\n");
printk231drivers/net/hp.cif (ei_debug > 1) printk("resetting the 8390 time=%ld...", jiffies);
printk242drivers/net/hp.cprintk("%s: hp_reset_8390() did not complete.\n", dev->name);
printk244drivers/net/hp.cif (ei_debug > 1) printk("8390 reset done (%ld).", jiffies);
printk304drivers/net/hp.cprintk("%s: RX transfer address mismatch, %#4.4x vs. %#4.4x (actual).\n",
printk361drivers/net/hp.cprintk("%s: TX Transfer address mismatch, %#4.4x vs. %#4.4x.\n",
printk410drivers/net/hp.cprintk(KERN_NOTICE "hp.c: Presently autoprobing (not recommended) for a single card.\n");
printk413drivers/net/hp.cprintk(KERN_WARNING "hp.c: No HP card found (i/o = 0x%x).\n", io[this_dev]);
printk244drivers/net/hp100.cprintk( "hp100: PCI BIOS is present, checking for devices..\n" );
printk266drivers/net/hp100.cprintk( "hp100: PCI Master Bit has not been set. Setting...\n" );
printk273drivers/net/hp100.cprintk( "hp100: PCI adapter found at 0x%x\n", ioaddr );
printk313drivers/net/hp100.cprintk( "hp100_probe1: dev == NULL ?\n" );
printk328drivers/net/hp100.cprintk( "hp100_probe1: card found at port 0x%x\n", ioaddr );
printk342drivers/net/hp100.cprintk( "hp100_probe1: EISA ID = 0x%08x  checksum = 0x%02x\n", eisa_id, uc );
printk347drivers/net/hp100.cprintk( "hp100_probe: bad EISA ID checksum at base port 0x%x\n", ioaddr );
printk356drivers/net/hp100.cprintk( "hp100_probe1: card at port 0x%x isn't known (id = 0x%x)\n", ioaddr, eisa_id );
printk362drivers/net/hp100.cprintk( "hp100_probe1: newer version of card %s at port 0x%x - unsupported\n", 
printk371drivers/net/hp100.cprintk( "hp100_probe1: bad lan address checksum (card %s at port 0x%x)\n", 
printk395drivers/net/hp100.cprintk( "hp100: vremap for high PCI memory at 0x%lx failed\n", (u_long)mem_ptr_phys );
printk445drivers/net/hp100.cprintk( "%s: %s at 0x%x, IRQ %d, ",
printk448drivers/net/hp100.ccase HP100_BUS_EISA: printk( "EISA" ); break;
printk449drivers/net/hp100.ccase HP100_BUS_PCI:  printk( "PCI" );  break;
printk450drivers/net/hp100.cdefault:     printk( "ISA" );  break;
printk452drivers/net/hp100.cprintk( " bus, %dk SRAM (rx/tx %d%%).\n",
printk456drivers/net/hp100.cprintk( "%s: Memory area at 0x%lx-0x%lx",
printk459drivers/net/hp100.cprintk( " (virtual base 0x%lx)", (u_long)mem_ptr_virt );
printk460drivers/net/hp100.cprintk( ".\n" );
printk462drivers/net/hp100.cprintk( "%s: ", dev -> name );
printk464drivers/net/hp100.cprintk( "Adapter is attached to " );
printk467drivers/net/hp100.cprintk( "100Mb/s Voice Grade AnyLAN network.\n" );
printk470drivers/net/hp100.cprintk( "10Mb/s network.\n" );
printk473drivers/net/hp100.cprintk( "Warning! Link down.\n" );
printk493drivers/net/hp100.cprintk( "%s: unable to get IRQ %d\n", dev -> name, dev -> irq );
printk586drivers/net/hp100.cprintk( "%s: no connection found - check wire\n", dev -> name );
printk598drivers/net/hp100.cprintk( "hp100_start_xmit: rx free mem = 0x%x\n", i );
printk604drivers/net/hp100.cprintk( "%s: login to 100Mb/s hub retry\n", dev -> name );
printk616drivers/net/hp100.cprintk( "%s: link down detected\n", dev -> name );
printk621drivers/net/hp100.cprintk( "%s: cable change 10Mb/s <-> 100Mb/s detected\n", dev -> name );
printk630drivers/net/hp100.cprintk( "%s: interface reset\n", dev -> name );
printk650drivers/net/hp100.cprintk( "hp100_start_xmit: busy\n" );
printk658drivers/net/hp100.cprintk( "hp100_start_xmit: irq_status = 0x%x, len = %d\n", val, (int)skb -> len );
printk694drivers/net/hp100.cprintk( "hp100_start_xmit: end\n" );
printk724drivers/net/hp100.cprintk( "hp100_rx: waiting packets = %d\n", packets );
printk731drivers/net/hp100.cprintk( "hp100_rx: busy, remaining packets = %d\n", packets );
printk745drivers/net/hp100.cprintk( "hp100_rx: new packet - length = %d, errors = 0x%x, dest = 0x%x\n",
printk757drivers/net/hp100.cprintk( "hp100_rx: couldn't allocate a sk_buff of size %d\n", pkt_len );
printk780drivers/net/hp100.cprintk( "rx: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
printk793drivers/net/hp100.cprintk( "hp100_rx: end\n" );
printk855drivers/net/hp100.cprintk( "hp100_set_multicast_list: num_addrs = %d\n", dev->mc_count);
printk903drivers/net/hp100.cprintk( "%s: re-entering the interrupt handler\n", dev -> name );
printk909drivers/net/hp100.cprintk( "hp100_interrupt: irq_status = 0x%x\n", val );
printk927drivers/net/hp100.cprintk( "hp100_interrupt: end\n" );
printk978drivers/net/hp100.cprintk( "%s: hp100_stop_interface - timeout\n", dev -> name );
printk991drivers/net/hp100.cprintk( "%s: hp100_load_eeprom - timeout\n", dev -> name );
printk1008drivers/net/hp100.cprintk( "hp100_sense_lan: val_VG = 0x%04x, val_10 = 0x%04x\n", val_VG, val_10 );
printk1040drivers/net/hp100.cprintk( "hp100_down_vg_link: timeout\n" );
printk1061drivers/net/hp100.cprintk( "hp100_login_to_vg_hub: timeout for link\n" );
printk1078drivers/net/hp100.cprintk( "hp100_login_to_vg_hub: timeout for link (bring up)\n" );
printk1091drivers/net/hp100.cprintk( "%s: 100Mb cable training failed, check cable.\n", dev -> name );
printk1093drivers/net/hp100.cprintk( "%s: 100Mb node not accepted by hub, check frame type or security.\n", dev -> name );
printk1122drivers/net/hp100.cprintk("HP100: You should not use auto-probing with insmod!\n");
printk95drivers/net/ibmtr.c#define DPRINTK(format, args...) printk("%s: " format, dev->name , ## args)
printk162drivers/net/ibmtr.cfor (i=0,j=0;i<24;i++,j=j+stride) printk("%1x",((int) pcid[j])&0x0f);
printk163drivers/net/ibmtr.cprintk("\n");
printk338drivers/net/ibmtr.cprintk(", segment=%02X",segment);
printk340drivers/net/ibmtr.cprintk(".\n");
printk351drivers/net/ibmtr.cprintk("%1X",ti->hw_address[j]=temp);
printk360drivers/net/ibmtr.cprintk("\n");
printk498drivers/net/ibmtr.cprintk("%s",version);
printk632drivers/net/ibmtr.cprintk("%02X ",*check_reason);  
printk633drivers/net/ibmtr.cprintk("\n");
printk914drivers/net/ibmtr.cprintk("%02X ",*(ti->init_srb+i));
printk915drivers/net/ibmtr.cprintk("\n");
printk936drivers/net/ibmtr.cprintk("%02X%s",dev->dev_addr[i]=encoded_addr[i],(i==TR_ALEN-1) ? "" : ":" );
printk937drivers/net/ibmtr.cprintk("\n");
printk1302drivers/net/ibmtr.cprintk("ibmtr: You should not use auto-probing with insmod!\n");
printk1306drivers/net/ibmtr.cprintk("ibmtr: register_netdev() returned non-zero.\n");
printk280drivers/net/lance.cprintk("lance.c: PCI bios is present, checking for devices...\n");
printk303drivers/net/lance.cprintk("PCI Master Bit has not been set. Setting...\n");
printk308drivers/net/lance.cprintk("Found PCnet/PCI at %#x, irq %d.\n",
printk383drivers/net/lance.cprintk("  LANCE chip version is %#x.\n", chip_version);
printk395drivers/net/lance.cprintk("%s: %s at %#3x,", dev->name, chipname, ioaddr);
printk400drivers/net/lance.cprintk(" %2.2x", dev->dev_addr[i] = inb(ioaddr + i));
printk443drivers/net/lance.cprintk(" HP Vectra IRQ %d DMA %d.\n", dev->irq, dev->dma);
printk450drivers/net/lance.cprintk(" HP J2405A IRQ %d DMA %d.\n", dev->irq, dev->dma);
printk470drivers/net/lance.cprintk(" assigned IRQ %d", dev->irq);
printk482drivers/net/lance.cprintk(", probed IRQ %d", dev->irq);
printk484drivers/net/lance.cprintk(", failed to detect IRQ line.\n");
printk495drivers/net/lance.cprintk(", no DMA needed.\n");
printk498drivers/net/lance.cprintk("DMA %d allocation failed.\n", dev->dma);
printk501drivers/net/lance.cprintk(", assigned DMA %d.\n", dev->dma);
printk525drivers/net/lance.cprintk(", DMA %d.\n", dev->dma);
printk533drivers/net/lance.cprintk("DMA detection failed.\n");
printk546drivers/net/lance.cprintk(version);
printk596drivers/net/lance.cprintk("%s: lance_open() irq %d dma %d tx/rx rings %#x/%#x init %#x.\n",
printk627drivers/net/lance.cprintk("%s: LANCE open after %d ticks, init block %#x csr0 %4.4x.\n",
printk718drivers/net/lance.cprintk("%s: transmit timed out, status %4.4x, resetting.\n",
printk725drivers/net/lance.cprintk(" Ring data dump: dirty_tx %d cur_tx %d%s cur_rx %d.",
printk729drivers/net/lance.cprintk("%s %08x %04x %04x", i & 0x3 ? "" : "\n ",
printk733drivers/net/lance.cprintk("%s %08x %04x %04x", i & 0x3 ? "" : "\n ",
printk736drivers/net/lance.cprintk("\n");
printk757drivers/net/lance.cprintk("%s: lance_start_xmit() called, csr0 %4.4x.\n", dev->name,
printk765drivers/net/lance.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk771drivers/net/lance.cprintk("%s: tx queue lock!.\n", dev->name);
printk797drivers/net/lance.cprintk("%s: bouncing a high-memory packet (%#x).\n",
printk837drivers/net/lance.cprintk ("lance_interrupt(): irq %d for unknown device.\n", irq);
printk844drivers/net/lance.cprintk("%s: Re-entering the interrupt handler.\n", dev->name);
printk857drivers/net/lance.cprintk("%s: interrupt  csr0=%#2.2x new csr=%#2.2x.\n",
printk886drivers/net/lance.cprintk("%s: Tx FIFO error! Status %4.4x.\n",
printk908drivers/net/lance.cprintk("out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
printk929drivers/net/lance.cprintk("%s: Bus master arbitration failure, status %4.4x.\n",
printk948drivers/net/lance.cprintk("%s: exiting interrupt, csr%d=%#4.4x.\n",
printk986drivers/net/lance.cprintk("%s: Memory squeeze, deferring packet.\n", dev->name);
printk1038drivers/net/lance.cprintk("%s: Shutting down ethercard, status was %2.2x.\n",
printk1088drivers/net/lance.cprintk("%s: Promiscuous mode enabled.\n", dev->name);
printk185drivers/net/ne.cprintk(version);
printk187drivers/net/ne.cprintk("NE*000 ethercard probe at %#3x:", ioaddr);
printk197drivers/net/ne.cprintk(" not found (no reset ack).\n");
printk277drivers/net/ne.cprintk(" not found (invalid signature %2.2x %2.2x).\n",
printk282drivers/net/ne.cprintk(" not found.\n");
printk290drivers/net/ne.cprintk("ne.c: Passed a NULL device.\n");
printk303drivers/net/ne.cprintk(" autoirq is %d\n", dev->irq);
printk310drivers/net/ne.cprintk(" failed to detect IRQ line.\n");
printk319drivers/net/ne.cprintk (" unable to get IRQ %d (irqval=%d).\n", dev->irq, irqval);
printk328drivers/net/ne.cprintk (" unable to get memory for dev->priv.\n");
printk336drivers/net/ne.cprintk(" %2.2x", SA_prom[i]);
printk340drivers/net/ne.cprintk("\n%s: %s found at %#x, using IRQ %d.\n",
printk376drivers/net/ne.cprintk("%s: Shutting down ethercard.\n", dev->name);
printk389drivers/net/ne.cif (ei_debug > 1) printk("resetting the 8390 t=%ld...", jiffies);
printk400drivers/net/ne.cprintk("%s: ne_reset_8390() did not complete.\n", dev->name);
printk418drivers/net/ne.cprintk("%s: DMAing conflict in ne_get_8390_hdr "
printk458drivers/net/ne.cprintk("%s: DMAing conflict in ne_block_input "
printk500drivers/net/ne.cprintk("%s: RX transfer address mismatch,"
printk527drivers/net/ne.cprintk("%s: DMAing conflict in ne_block_output."
printk587drivers/net/ne.cprintk("%s: Tx packet transfer address mismatch,"
printk598drivers/net/ne.cprintk("%s: timeout waiting for Tx RDC.\n", dev->name);
printk644drivers/net/ne.cprintk(KERN_NOTICE "ne.c: Module autoprobing not allowed. Append \"io=0xNNN\" value(s).\n");
printk648drivers/net/ne.cprintk(KERN_WARNING "ne.c: No NE*000 card found (i/o = 0x%x).\n", io[this_dev]);
printk163drivers/net/net_init.cprintk("ether_setup: Ouch! Someone else took %s\n",
printk256drivers/net/net_init.cprintk("loading device '%s'...\n", dev->name);
printk293drivers/net/net_init.cprintk("was NULL\n");
printk299drivers/net/net_init.cprintk("ERROR '%s' busy and not MOD_IN_USE.\n", dev->name);
printk336drivers/net/net_init.cprintk("unregister_netdev: '%s' not found\n", dev->name);
printk148drivers/net/ni52.cprintk("%s: scb_cmd timed out .. resetting i82586\n",dev->name); \
printk309drivers/net/ni52.cprintk("%s: Init-Problems (alloc).\n",dev->name);
printk359drivers/net/ni52.cprintk("%s: Ni52 found at %#3lx, ",dev->name,dev->base_addr);
printk378drivers/net/ni52.cprintk("?memprobe, Can't find memory at 0x%lx!\n",dev->mem_start);
printk388drivers/net/ni52.cprintk("?memprobe, Can't find io-memory!\n");
printk411drivers/net/ni52.cprintk("Memaddr: 0x%lx, Memsize: %d, ",dev->mem_start,size);
printk420drivers/net/ni52.cprintk("?autoirq, Failed to detect IRQ line!\n"); 
printk427drivers/net/ni52.cprintk("IRQ %d.\n",dev->irq);
printk498drivers/net/ni52.cprintk("%s (ni52): configure command failed: %x\n",dev->name,cfg_cmd->cmd_status);
printk523drivers/net/ni52.cprintk("%s (ni52): individual address setup command failed: %04x\n",dev->name,ias_cmd->cmd_status);
printk545drivers/net/ni52.cprintk("%s: Problems while running the TDR.\n",dev->name);
printk559drivers/net/ni52.cprintk("%s: TDR: Transceiver problem!\n",dev->name);
printk561drivers/net/ni52.cprintk("%s: TDR: No correct termination %d clocks away.\n",dev->name,result & TDR_TIMEMASK);
printk565drivers/net/ni52.cprintk("%s: TDR: Detected a short circuit %d clocks away.\n",dev->name,result & TDR_TIMEMASK);
printk568drivers/net/ni52.cprintk("%s: TDR: Unknown status %04x\n",dev->name,result);
printk615drivers/net/ni52.cprintk("%s: Ooooops, no memory for MC-Setup!\n",dev->name);
printk623drivers/net/ni52.cprintk("%s: Sorry, can only apply %d MC-Address(es).\n",dev->name,num_addrs);
printk643drivers/net/ni52.cprintk("%s: Can't apply multicast-address-list.\n",dev->name);
printk658drivers/net/ni52.cprintk("%s: not enough shared-mem for your configuration!\n",dev->name);
printk748drivers/net/ni52.cprintk ("ni52-interrupt: irq %d for unknown device.\n",(int) -(((struct pt_regs *)reg_ptr)->orig_eax+2));
printk770drivers/net/ni52.cprintk("%s: oops! CU has left active state. stat: %04x/%04x.\n",dev->name,(int) stat,(int) p->scb->status);
printk784drivers/net/ni52.cprintk("%s: Receiver-Unit went 'NOT READY': %04x/%04x.\n",dev->name,(int) stat,(int) p->scb->status);
printk833drivers/net/ni52.cprintk("%s: received oversized frame.\n",dev->name);
printk839drivers/net/ni52.cprintk("%s: oops! rfd-error-status: %04x\n",dev->name,status);
printk868drivers/net/ni52.cprintk("%s: Receive-Unit restarted. Status: %04x\n",dev->name,p->scb->status);
printk883drivers/net/ni52.cprintk("%s: strange .. xmit-int without a 'COMPLETE'\n",dev->name);
printk894drivers/net/ni52.cprintk("%s: late collision detected.\n",dev->name);
printk899drivers/net/ni52.cprintk("%s: no carrier detected.\n",dev->name);
printk902drivers/net/ni52.cprintk("%s: loss of CTS detected.\n",dev->name);
printk905drivers/net/ni52.cprintk("%s: DMA underrun detected.\n",dev->name);
printk908drivers/net/ni52.cprintk("%s: Max. collisions exceeded.\n",dev->name);
printk958drivers/net/ni52.cprintk("%s: strange ... timeout with CU active?!?\n",dev->name);
printk959drivers/net/ni52.cprintk("%s: X0: %04x N0: %04x N1: %04x %d\n",dev->name,(int)p->xmit_cmds[0]->cmd_status,(int)p->nop_cmds[0]->cmd_status,(int)p->nop_cmds[1]->cmd_status,(int)p->nop_point);
printk974drivers/net/ni52.cprintk("%s: xmitter timed out, try to restart! stat: %04x\n",dev->name,p->scb->status);
printk975drivers/net/ni52.cprintk("%s: command-stats: %04x %04x\n",dev->name,p->xmit_cmds[0]->cmd_status,p->xmit_cmds[1]->cmd_status);
printk994drivers/net/ni52.cprintk("%s: Sorry, max. framelength is %d bytes. The length of your frame is %ld bytes.\n",dev->name,XMIT_BUFF_SIZE,skb->len);
printk999drivers/net/ni52.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk1024drivers/net/ni52.cprintk("%s: Can't start transmit-command.\n",dev->name);
printk1097drivers/net/ni52.cprintk("%s: Can't apply promiscuous/multicastmode to a not running interface.\n",dev->name);
printk217drivers/net/ni65.cprintk("%s: wrong Hardaddress \n",dev->name);
printk226drivers/net/ni65.cprintk("%s: %s found at %#3lx, IRQ %d DMA %d.\n", dev->name,
printk232drivers/net/ni65.cprintk ("%s: unable to get IRQ %d (irqval=%d).\n", 
printk238drivers/net/ni65.cprintk("%s: Can't request dma-channel %d\n",dev->name,(int) dev->dma);
printk267drivers/net/ni65.cprintk("%s: Can't alloc TMD/RMD-buffer.\n",dev->name);
printk271drivers/net/ni65.cprintk("%s: Can't alloc TMD/RMD buffer in lower 16MB!\n",dev->name);
printk281drivers/net/ni65.cprintk("%s: Can't alloc Xmit-Mem.\n",dev->name);
printk285drivers/net/ni65.cprintk("%s: Can't alloc Xmit-Mem in lower 16MB!\n",dev->name);
printk294drivers/net/ni65.cprintk("%s: unable to alloc recv-mem\n",dev->name);
printk298drivers/net/ni65.cprintk("%s: unable to alloc receive-memory in lower 16MB!\n",dev->name);
printk327drivers/net/ni65.cprintk("%s: can't RESET ni6510 card: %04x\n",dev->name,(int) inw(PORT+L_DATAREG));
printk387drivers/net/ni65.cprintk("%s: can't init am7990, status: %04x\n",dev->name,(int) inw(PORT+L_DATAREG));
printk409drivers/net/ni65.cprintk ("net_interrupt(): irq %d for unknown device.\n", irq);
printk471drivers/net/ni65.cprintk("%s: xmit-error: %04x %04x\n",dev->name,(int) tmdstat,(int) tmdp->status2);
printk473drivers/net/ni65.cprintk("%s: tdr-problems (e.g. no resistor)\n",dev->name);
printk515drivers/net/ni65.cprintk("%s: packet too long\n",dev->name);
printk521drivers/net/ni65.cprintk("%s: receive-error: %04x\n",dev->name,(int) rmdstat );
printk527drivers/net/ni65.cprintk("%s: lance-status: %04x\n",dev->name,(int) inw(PORT+L_DATAREG));
printk554drivers/net/ni65.cprintk("%s: can't alloc new sk_buff\n",dev->name);
printk578drivers/net/ni65.cprintk("%s: xmitter timed out, try to restart!\n",dev->name);
printk595drivers/net/ni65.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk600drivers/net/ni65.cprintk("%s: Queue was locked!\n",dev->name);
printk556drivers/net/pi2.cprintk("PI: %s: Memory squeeze, dropping packet.\n", dev->name);
printk645drivers/net/pi2.cprintk("PI: %s: Memory squeeze, dropping packet.\n", dev->name);
printk1217drivers/net/pi2.cprintk(version);
printk1224drivers/net/pi2.cprintk("PI: Probing for card at address %#3x\n",ioaddr);
printk1231drivers/net/pi2.cprintk("PI: Found a PI card at address %#3x\n", ioaddr);
printk1234drivers/net/pi2.cprintk("PI: Found a PI2 card at address %#3x\n", ioaddr);
printk1237drivers/net/pi2.cprintk("PI: ERROR: No card found\n");
printk1367drivers/net/pi2.cprintk("PI: DMA channel %d out of range\n", lp->dmachan);
printk1384drivers/net/pi2.cprintk(". Failed to detect IRQ line.\n");
printk1394drivers/net/pi2.cprintk("PI: Autodetected IRQ %d, assuming DMA %d.\n",
printk1403drivers/net/pi2.cprintk("PI: unable to get IRQ %d (irqval=%d).\n",
printk1523drivers/net/pi2.cprintk("PI: pi_interrupt(): irq %d for unknown device.\n", irq);
printk233drivers/net/plip.cprintk(version);
printk234drivers/net/plip.cprintk("%s: Parallel port at %#3lx, ", dev->name, dev->base_addr);
printk236drivers/net/plip.cprintk("using assigned IRQ %d.\n", dev->irq);
printk255drivers/net/plip.cprintk("using probed IRQ %d.\n", dev->irq);
printk257drivers/net/plip.cprintk("failed to detect IRQ(%d) --"
printk278drivers/net/plip.cprintk(KERN_ERR "%s: out of memory\n", dev->name);
printk391drivers/net/plip.cprintk("%s: transmit timeout(%d,%02x)\n",
printk409drivers/net/plip.cprintk("%s: receive timeout(%d,%02x)\n",
printk509drivers/net/plip.cprintk("%s: receive start\n", dev->name);
printk539drivers/net/plip.cprintk("%s: bogus packet size %d.\n", dev->name, rcv->length.h);
printk545drivers/net/plip.cprintk("%s: Memory squeeze.\n", dev->name);
printk573drivers/net/plip.cprintk("%s: checksum error\n", dev->name);
printk585drivers/net/plip.cprintk("%s: receive end\n", dev->name);
printk668drivers/net/plip.cprintk("%s: send skb lost\n", dev->name);
printk690drivers/net/plip.cprintk("%s: collision.\n", dev->name);
printk698drivers/net/plip.cprintk("%s: send start\n", dev->name);
printk751drivers/net/plip.cprintk("%s: send end\n", dev->name);
printk786drivers/net/plip.cprintk("%s: reset interface.\n", dev->name);
printk811drivers/net/plip.cprintk ("plip_interrupt: irq %d for unknown device.\n", irq);
printk821drivers/net/plip.cprintk("%s: spurious interrupt\n", dev->name);
printk826drivers/net/plip.cprintk("%s: interrupt.\n", dev->name);
printk845drivers/net/plip.cprintk("%s: receive interrupt when receiving packet\n", dev->name);
printk850drivers/net/plip.cprintk("%s: receive interrupt in error state\n", dev->name);
printk868drivers/net/plip.cprintk("plip_rebuild_header: Don't know how to resolve type %d addresses?\n", (int)eth->h_proto);
printk897drivers/net/plip.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk902drivers/net/plip.cprintk("%s: packet too big, %d.\n", dev->name, (int)skb->len);
printk908drivers/net/plip.cprintk("%s: send request\n", dev->name);
printk939drivers/net/plip.cprintk("%s: IRQ is not set.  Please set it by ifconfig.\n", dev->name);
printk945drivers/net/plip.cprintk("%s: couldn't get IRQ %d.\n", dev->name, dev->irq);
printk1028drivers/net/plip.cprintk("%s: You cannot change base_addr of this interface (ignored).\n", dev->name);
printk1102drivers/net/plip.cprintk(KERN_INFO "plip%d: Not found\n", i);
printk1117drivers/net/plip.cprintk(KERN_INFO "plip: no interfaces found\n");
printk246drivers/net/ppp.c#define CHECK_PPP(a)  if (!ppp->inuse) { printk (ppp_warning, __LINE__); return a;}
printk247drivers/net/ppp.c#define CHECK_PPP_VOID()  if (!ppp->inuse) { printk (ppp_warning, __LINE__); return;}
printk395drivers/net/ppp.cprintk (KERN_INFO
printk403drivers/net/ppp.cprintk (KERN_INFO
printk408drivers/net/ppp.cprintk (KERN_INFO
printk446drivers/net/ppp.cprintk (KERN_INFO "PPP line discipline registered.\n");
printk448drivers/net/ppp.cprintk (KERN_ERR "error registering line discipline: %d\n",
printk669drivers/net/ppp.cprintk (KERN_INFO "ppp: channel %s mtu = %d, mru = %d\n",
printk683drivers/net/ppp.cprintk (KERN_ERR
printk822drivers/net/ppp.cprintk (KERN_WARNING
printk827drivers/net/ppp.cprintk (KERN_INFO "ppp: channel %s closing.\n",
printk850drivers/net/ppp.cprintk (KERN_ERR
printk862drivers/net/ppp.cprintk (KERN_ERR
printk886drivers/net/ppp.cprintk (KERN_ERR
printk904drivers/net/ppp.cprintk (KERN_ERR
printk911drivers/net/ppp.cprintk (KERN_INFO "ppp: channel %s open\n",
printk1135drivers/net/ppp.cprintk (KERN_DEBUG
printk1259drivers/net/ppp.cprintk (KERN_ERR
printk1328drivers/net/ppp.cprintk (KERN_NOTICE
printk1347drivers/net/ppp.cprintk (KERN_NOTICE
printk1378drivers/net/ppp.cprintk (KERN_DEBUG
printk1409drivers/net/ppp.cprintk (KERN_INFO
printk1420drivers/net/ppp.cprintk (KERN_INFO
printk1427drivers/net/ppp.cprintk (KERN_WARNING
printk1623drivers/net/ppp.cprintk (KERN_WARNING
printk1640drivers/net/ppp.cprintk (KERN_WARNING
printk1652drivers/net/ppp.cprintk (KERN_WARNING
printk1700drivers/net/ppp.cprintk (KERN_ERR
printk1737drivers/net/ppp.cprintk (KERN_ERR
printk1797drivers/net/ppp.cprintk (KERN_DEBUG
printk1810drivers/net/ppp.cprintk (KERN_DEBUG
printk1847drivers/net/ppp.cprintk (KERN_DEBUG
printk1855drivers/net/ppp.cprintk (KERN_DEBUG
printk1867drivers/net/ppp.cprintk (KERN_DEBUG "ppp_tty_read: len = %d\n", len);
printk1876drivers/net/ppp.cprintk (KERN_DEBUG
printk1918drivers/net/ppp.cprintk (KERN_DEBUG
printk1938drivers/net/ppp.cprintk (KERN_DEBUG "ppp_stuff_char: %x %d\n",
printk2017drivers/net/ppp.cprintk (KERN_DEBUG "ppp_dev_xmit_lower: fcs is %hx\n",
printk2031drivers/net/ppp.cprintk (KERN_DEBUG
printk2079drivers/net/ppp.cprintk (KERN_ERR
printk2183drivers/net/ppp.cprintk (KERN_WARNING
printk2194drivers/net/ppp.cprintk (KERN_ERR
printk2205drivers/net/ppp.cprintk (KERN_DEBUG "ppp_tty_write: sleeping\n");
printk2293drivers/net/ppp.cprintk("ppp%ld: comp_alloc failed\n",
printk2305drivers/net/ppp.cprintk("ppp%ld: decomp_alloc failed\n",
printk2315drivers/net/ppp.cprintk(KERN_DEBUG "ppp%ld: no compressor for [%x %x %x], %x\n",
printk2357drivers/net/ppp.cprintk (KERN_INFO
printk2378drivers/net/ppp.cprintk (KERN_DEBUG
printk2398drivers/net/ppp.cprintk (KERN_INFO
printk2419drivers/net/ppp.cprintk (KERN_INFO
printk2435drivers/net/ppp.cprintk (KERN_INFO
printk2449drivers/net/ppp.cprintk (KERN_INFO
printk2463drivers/net/ppp.cprintk (KERN_INFO
printk2479drivers/net/ppp.cprintk (KERN_INFO
printk2495drivers/net/ppp.cprintk (KERN_INFO
printk2516drivers/net/ppp.cprintk (KERN_INFO
printk2533drivers/net/ppp.cprintk (KERN_INFO
printk2562drivers/net/ppp.cprintk (KERN_INFO
printk2576drivers/net/ppp.cprintk (KERN_INFO
printk2585drivers/net/ppp.cprintk (KERN_ERR
printk2604drivers/net/ppp.cprintk (KERN_ERR
printk2701drivers/net/ppp.cprintk (KERN_ERR
printk2708drivers/net/ppp.cprintk (KERN_INFO
printk2727drivers/net/ppp.cprintk (KERN_ERR
printk2737drivers/net/ppp.cprintk (KERN_INFO
printk2905drivers/net/ppp.cprintk (KERN_ERR
printk2915drivers/net/ppp.cprintk (KERN_WARNING
printk3028drivers/net/ppp.cprintk (KERN_ERR
printk3038drivers/net/ppp.cprintk (KERN_WARNING
printk3126drivers/net/ppp.cprintk (KERN_WARNING "ppp_dev_xmit: null packet!\n");
printk3141drivers/net/ppp.cprintk (KERN_DEBUG "ppp_dev_xmit [%s]: skb %p\n",
printk3148drivers/net/ppp.cprintk (KERN_ERR
printk3221drivers/net/ppp.cprintk (KERN_INFO "ppp_dev_stats called");
printk3243drivers/net/ppp.cprintk("ppp_dev_output: No device.\n");
printk3362drivers/net/ppp.cprintk (KERN_INFO "registered device %s\n", dev->name);
printk3366drivers/net/ppp.cprintk (KERN_ERR
printk3417drivers/net/ppp.cprintk (KERN_DEBUG "ppp: %s, count = %d\n", name, count);
printk3423drivers/net/ppp.cprintk (KERN_DEBUG "%s\n", line);
printk3432drivers/net/ppp.cprintk (KERN_DEBUG "%s\n", line);
printk3534drivers/net/ppp.cprintk (KERN_INFO
printk3574drivers/net/ppp.cprintk (KERN_INFO
printk3584drivers/net/ppp.cprintk (KERN_INFO
printk3588drivers/net/ppp.cprintk (KERN_INFO
printk188drivers/net/pt.cprintk("Rx KISS... Control = %d, value = %d.\n", ptr[0], (skb->len > 1? ptr[1] : -1));
printk229drivers/net/pt.cprintk("PTd hardware_send_packet(): kickflag = %d (%d).\n", kickflag, lp->base & CHANA);
printk369drivers/net/pt.cprintk("PTd scc_init(): (%d).\n", lp->base & CHANA);
printk489drivers/net/pt.cprintk("PTd chipset_init(): pt0a tstate = %d.\n", ((struct pt_local*)pt0a.priv)->tstate);
printk490drivers/net/pt.cprintk("PTd chipset_init(): pt0b tstate = %d.\n", ((struct pt_local*)pt0b.priv)->tstate);  
printk501drivers/net/pt.cprintk("PTd chipset_init() Resetting SCC, called by ch (%d).\n", lp->base & CHANA);
printk525drivers/net/pt.cprintk(version);
printk531drivers/net/pt.cprintk("PT: Probing for card at address %#3x\n", ioaddr);
printk536drivers/net/pt.cprintk("PT: Found a PT at address %#3x\n",ioaddr);
printk538drivers/net/pt.cprintk("PT: ERROR: No card found.\n");
printk644drivers/net/pt.cprintk("PTd pt_rts(): Transmitter status will be %d (%d).\n", x, lp->base & CHANA);
printk860drivers/net/pt.cprintk("PT: ERROR: Failed to detect IRQ line, assuming IRQ7.\n");
printk864drivers/net/pt.cprintk("PT: Autodetected IRQ %d, assuming DMA %d\n", dev->irq, dev->dma);
printk873drivers/net/pt.cprintk("PT: ERROR: Unable to get IRQ %d (irqval = %d).\n",
printk977drivers/net/pt.cprintk("PTd pt_send_packet(): (%d)\n", lp->base & CHANA);
printk1022drivers/net/pt.cprintk("PTd pt_close(): Closing down channel (%d).\n", lp->base & CHANA);  
printk1156drivers/net/pt.cprintk("PTd pt_txisr(): tstate = %d (%d).\n", lp->tstate, lp->base & CHANA);
printk1256drivers/net/pt.cprintk("PT: pt_txisr(): Invlaid tstate (%d) for chan %s.\n", lp->tstate, (cmd & CHANA? "A": "B") );
printk1283drivers/net/pt.cprintk("PTd pt_rxisr(): R1 = %#3x. (%d)\n", rse, lp->base & CHANA);
printk1336drivers/net/pt.cprintk("PTd pt_rxisr() Got end of a %u byte frame.\n", lp->rcvbuf->cnt);
printk1374drivers/net/pt.cprintk("PTd pt_rxisr() %s error.\n", (rse & CRC_ERR)? "CRC" : "state");
printk1395drivers/net/pt.cprintk("PT: %s: Memory squeze, dropping packet.\n", dev->name);
printk1450drivers/net/pt.cprintk("PTd pt_tmrisr(): tstate = %d (%d).\n", lp->tstate, lp->base & CHANA);
printk1470drivers/net/pt.cprintk("PT: pt_tmrisr(): Invalid tstate %d for Channel A\n", lp->tstate);
printk1472drivers/net/pt.cprintk("PT: pt_tmrisr(): Invalid tstate %d for Channel B\n", lp->tstate);
printk1501drivers/net/pt.cprintk("PTd pt_interrupt(): R3 = %#3x", st);
printk1505drivers/net/pt.cprintk(" R2 = %#3x.\n", st);
printk1576drivers/net/pt.cprintk("PTd exisr(): R0 = %#3x tstate = %d (%d).\n", st, lp->tstate, lp->base & CHANA);
printk1591drivers/net/pt.cprintk("PTd exisr(): unexpected underrun detected.\n");
printk1749drivers/net/pt.cprintk("PTd exisr(): abort detected.\n");
printk1768drivers/net/pt.cprintk("PTd: pt_exisr(): DCD is now %s.\n", (st & DCD)? "ON" : "OFF" );
printk1776drivers/net/pt.cprintk("PTd pt_exisr() dumping %u bytes from buffer.\n", lp->rcvbuf->cnt);
printk1818drivers/net/pt.cprintk("PT: send_kiss(): Memory squeeze, dropping KISS reply.\n");
printk148drivers/net/seeq8005.cprintk("seeq8005: probing at 0x%x\n",ioaddr);
printk155drivers/net/seeq8005.cprintk("seeq8005: reserved stat bits != 0x1800\n");
printk156drivers/net/seeq8005.cprintk("          == 0x%04x\n",old_stat);
printk169drivers/net/seeq8005.cprintk("seeq8005: unused rear bits != 0xff00\n");
printk170drivers/net/seeq8005.cprintk("          == 0x%04x\n",old_rear);
printk180drivers/net/seeq8005.cprintk("seeq8005: stat = 0x%04x\n",old_stat);
printk181drivers/net/seeq8005.cprintk("seeq8005: cfg1 = 0x%04x\n",old_cfg1);
printk182drivers/net/seeq8005.cprintk("seeq8005: cfg2 = 0x%04x\n",old_cfg2);
printk183drivers/net/seeq8005.cprintk("seeq8005: raer = 0x%04x\n",old_rear);
printk184drivers/net/seeq8005.cprintk("seeq8005: dmaar= 0x%04x\n",old_dmaar);
printk201drivers/net/seeq8005.cprintk("seeq8005: prom sum error\n");
printk218drivers/net/seeq8005.cprintk("seeq8005: prom sum = 0x%08x\n",j);
printk220drivers/net/seeq8005.cprintk("seeq8005: prom %02x: ",j);
printk222drivers/net/seeq8005.cprintk("%02x ",SA_prom[j|i]);
printk224drivers/net/seeq8005.cprintk(" ");
printk227drivers/net/seeq8005.cprintk("%c", SA_prom[j|i]);
printk229drivers/net/seeq8005.cprintk(" ");
printk232drivers/net/seeq8005.cprintk("\n");
printk243drivers/net/seeq8005.cprintk("seeq8005: testing packet buffer ... ");
printk265drivers/net/seeq8005.cprintk("%i\n",j);
printk267drivers/net/seeq8005.cprintk("ok.\n");
printk277drivers/net/seeq8005.cprintk(version);
printk279drivers/net/seeq8005.cprintk("%s: %s found at %#3x, ", dev->name, "seeq8005", ioaddr);
printk286drivers/net/seeq8005.cprintk(" %2.2x", dev->dev_addr[i] = SA_prom[i+6]);
printk298drivers/net/seeq8005.cprintk(" autoirq is %d\n", dev->irq);
printk309drivers/net/seeq8005.cprintk ("%s: unable to get IRQ %d (irqval=%d).\n", dev->name,
printk355drivers/net/seeq8005.cprintk ("%s: unable to get IRQ %d (irqval=%d).\n", dev->name,
printk384drivers/net/seeq8005.cprintk("%s: transmit timed out, %s?\n", dev->name,
printk403drivers/net/seeq8005.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk428drivers/net/seeq8005.cprintk ("net_interrupt(): irq %d for unknown device.\n", irq);
printk433drivers/net/seeq8005.cprintk ("%s: Re-entering the interrupt handler.\n", dev->name);
printk442drivers/net/seeq8005.cprintk("%s: int, status=0x%04x\n",dev->name,status);
printk448drivers/net/seeq8005.cprintk("%s: window int!\n",dev->name);
printk465drivers/net/seeq8005.cprintk("%s: eoi\n",dev->name);
printk494drivers/net/seeq8005.cprintk("%s: 0x%04x recv next=0x%04x, hdr=0x%04x\n",dev->name,lp->receive_ptr,next_packet,pkt_hdr);
printk511drivers/net/seeq8005.cprintk("%s: recv packet ring corrupt, resetting board\n",dev->name);
printk519drivers/net/seeq8005.cprintk("%s: recv len=0x%04x\n",dev->name,pkt_len);
printk538drivers/net/seeq8005.cprintk("%s: Memory squeeze, dropping packet.\n", dev->name);
printk550drivers/net/seeq8005.cprintk("%s: recv ",dev->name);
printk552drivers/net/seeq8005.cprintk("%02x ",*(p++)&0xff);
printk554drivers/net/seeq8005.cprintk("\n");
printk664drivers/net/seeq8005.cprintk("%s: SA0 = ",dev->name);
printk671drivers/net/seeq8005.cprintk("%02x ",inb(SEEQ_BUFFER));
printk673drivers/net/seeq8005.cprintk("\n");
printk683drivers/net/seeq8005.cprintk("%s: stat = 0x%04x\n",dev->name,inw(SEEQ_STATUS));
printk684drivers/net/seeq8005.cprintk("%s: cfg1 = 0x%04x\n",dev->name,old_cfg1);
printk685drivers/net/seeq8005.cprintk("%s: cfg2 = 0x%04x\n",dev->name,inw(SEEQ_CFG2));
printk686drivers/net/seeq8005.cprintk("%s: raer = 0x%04x\n",dev->name,inw(SEEQ_REA));
printk687drivers/net/seeq8005.cprintk("%s: dmaar= 0x%04x\n",dev->name,inw(SEEQ_DMAAR));
printk701drivers/net/seeq8005.cprintk("%s: send 0x%04x\n",dev->name,length);
printk368drivers/net/sk_g16.c#define PRINTK(x) printk x
printk374drivers/net/sk_g16.c#define PRINTK2(x) printk x
printk663drivers/net/sk_g16.cprintk("%s: SK_ADDR %#08x is not valid. Check configuration.\n",
printk678drivers/net/sk_g16.cprintk("%s: RAM + ROM are set to the same address %#08x\n"
printk693drivers/net/sk_g16.cprintk("%s: SK_ADDR %#08x is not valid. Check configuration.\n",
printk711drivers/net/sk_g16.cprintk("%s: SK_ADDR %#08x is not valid. Check configuration.\n",
printk728drivers/net/sk_g16.cprintk("%s: We found Boot_ROM at %#08x. Now setting RAM on"
printk737drivers/net/sk_g16.cprintk("%s: SK_ADDR %#08x is not valid. Check configuration.\n",
printk771drivers/net/sk_g16.cprintk("%s: %s found at %#3x, HW addr: %#04x:%02x:%02x:%02x:%02x:%02x\n",
printk895drivers/net/sk_g16.cprintk("%s: unable to get an IRQ\n", dev->name);
printk908drivers/net/sk_g16.cprintk("%s: unable to get IRQ 9\n", dev->name);
printk929drivers/net/sk_g16.cprintk("%s: unable to get selected IRQ\n", dev->name);
printk944drivers/net/sk_g16.cprintk("%s: Preselected IRQ %d is invalid for %s boards",
printk956drivers/net/sk_g16.cprintk("%s: Schneider & Koch G16 at %#3x, IRQ %d, shared mem at %#08x\n",
printk976drivers/net/sk_g16.cprintk("## %s: After lance init. CSR0: %#06x\n", 
printk979drivers/net/sk_g16.cprintk("## %s: LANCE stopped. CSR0: %#06x\n", 
printk982drivers/net/sk_g16.cprintk("## %s: Reinit with DTX + DRX off. CSR0: %#06x\n", 
printk985drivers/net/sk_g16.cprintk("## %s: LANCE stopped. CSR0: %#06x\n", 
printk988drivers/net/sk_g16.cprintk("## %s: LANCE back to normal mode. CSR0: %#06x\n", 
printk1145drivers/net/sk_g16.cprintk("%s: can't init am7990, status: %04x "
printk1207drivers/net/sk_g16.cprintk("%s: xmitter timed out, try to restart!\n", dev->name);
printk1244drivers/net/sk_g16.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk1323drivers/net/sk_g16.cprintk("SK_interrupt(): IRQ %d for unknown device.\n", irq);
printk1329drivers/net/sk_g16.cprintk("%s: Re-entering the interrupt handler.\n", dev->name);
printk1345drivers/net/sk_g16.cprintk("%s: error: %04x\n", dev->name, csr0);
printk1410drivers/net/sk_g16.cprintk("%s: TX error: %04x %04x\n", dev->name, (int) tmdstat,
printk1415drivers/net/sk_g16.cprintk("%s: tdr-problems \n", dev->name);
printk1540drivers/net/sk_g16.cprintk("%s: packet too long\n", dev->name);
printk1556drivers/net/sk_g16.cprintk("%s: RX error: %04x\n", dev->name, (int) rmdstat);
printk1583drivers/net/sk_g16.cprintk("%s: Couldn't allocate sk_buff, deferring packet.\n",
printk1663drivers/net/sk_g16.cprintk("%s: Shutting %s down CSR0 %#06x\n", dev->name, SK_NAME, 
printk2009drivers/net/sk_g16.cprintk("## %s: %s.\n"
printk2037drivers/net/sk_g16.cprintk("## %s: Device Structure. %s\n", SK_NAME, text);
printk2038drivers/net/sk_g16.cprintk("## DEVICE == NULL\n");
printk2042drivers/net/sk_g16.cprintk("## %s: Device Structure. %s\n", SK_NAME, text);
printk2043drivers/net/sk_g16.cprintk("## Device Name: %s Base Address: %#06lx IRQ: %d\n", 
printk2046drivers/net/sk_g16.cprintk("##   FLAGS: start: %d tbusy: %ld int: %d\n", 
printk2049drivers/net/sk_g16.cprintk("## next device: %#08x init function: %#08x\n", 
printk2082drivers/net/sk_g16.cprintk("## %s: RAM Details.\n"
printk2090drivers/net/sk_g16.cprintk("##   ");
printk2096drivers/net/sk_g16.cprintk("\n##   ");
printk2098drivers/net/sk_g16.cprintk("tmdbufs%d: %#08x ", (i+1), (int) p->tmdbufs[i]);
printk2100drivers/net/sk_g16.cprintk("##   ");
printk2106drivers/net/sk_g16.cprintk("\n##   ");
printk2108drivers/net/sk_g16.cprintk("rmdbufs%d: %#08x ", (i+1), (int) p->rmdbufs[i]);
printk2110drivers/net/sk_g16.cprintk("\n");
printk178drivers/net/skeleton.cprintk(KERN_DEBUG "%s", version);
printk180drivers/net/skeleton.cprintk(KERN_INFO "%s: %s found at %#3x, ", dev->name, cardname, ioaddr);
printk187drivers/net/skeleton.cprintk(" %2.2x", dev->dev_addr[i] = inb(ioaddr + i));
printk204drivers/net/skeleton.cprintk(" autoirq is %d", dev->irq);
printk214drivers/net/skeleton.cprintk("%s: unable to get IRQ %d (irqval=%d).\n",
printk225drivers/net/skeleton.cprintk("DMA %d allocation failed.\n", dev->dma);
printk228drivers/net/skeleton.cprintk(", assigned DMA %d.\n", dev->dma);
printk249drivers/net/skeleton.cprintk("DMA probe failed.\n");
printk253drivers/net/skeleton.cprintk("probed DMA %d allocation failed.\n", dev->dma);
printk336drivers/net/skeleton.cprintk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
printk355drivers/net/skeleton.cprintk(KERN_WARNING "%s: Transmitter access conflict.\n", dev->name);
printk382drivers/net/skeleton.cprintk(KERN_WARNING "%s: irq %d for unknown device.\n", cardname, irq);
printk438drivers/net/skeleton.cprintk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
printk556drivers/net/skeleton.cprintk(KERN_WARNING "%s: You shouldn't use auto-probing with insmod!\n",
printk707drivers/net/slhc.cprintk("\t%ld Cmp, %ld Uncmp, %ld Bad, %ld Tossed\n",
printk719drivers/net/slhc.cprintk("\t%ld Cmp, %ld Uncmp, %ld AsIs, %ld NotTCP\n",
printk724drivers/net/slhc.cprintk("\t%10ld Searches, %10ld Misses\n",
printk734drivers/net/slhc.cprintk("CSLIP: code copyright 1989 Regents of the University of California\n");
printk169drivers/net/slip.cprintk("sl_alloc() - register_netdev() failure.\n");
printk208drivers/net/slip.cprintk("%s: sl_free for already free unit.\n", sl->dev->name);
printk247drivers/net/slip.cprintk("%s: unable to grow slip buffers, MTU change cancelled.\n",
printk321drivers/net/slip.cprintk("%s: trying to lock already locked device!\n", sl->dev->name);
printk331drivers/net/slip.cprintk("%s: trying to unlock already unlocked device!\n", sl->dev->name);
printk349drivers/net/slip.cprintk("%s: compressed packet ignored\n", sl->dev->name);
printk366drivers/net/slip.cprintk("%s: header compression turned on\n", sl->dev->name);
printk378drivers/net/slip.cprintk("%s: memory squeeze, dropping packet.\n", sl->dev->name);
printk411drivers/net/slip.cprintk ("%s: truncating oversized transmit packet!\n", sl->dev->name);
printk483drivers/net/slip.cprintk("%s: xmit call when iface is down\n", dev->name);
printk505drivers/net/slip.cprintk("%s: transmit timed out, %s?\n", dev->name,
printk1119drivers/net/slip.cprintk("SLIP: version %s (dynamic channels, max=%d)"
printk1126drivers/net/slip.cprintk("CSLIP: code copyright 1989 Regents of the University of California\n");
printk1129drivers/net/slip.cprintk("AX25: KISS encapsulation enabled\n");
printk1134drivers/net/slip.cprintk("SLIP: Can't allocate slip_ctrls[] array!  Uaargh! (-> No SLIP available)\n");
printk1156drivers/net/slip.cprintk("SLIP: can't register line discipline (err = %d)\n", status);
printk1255drivers/net/slip.cprintk("SLIP: can't unregister line discipline (err = %d)\n", i);
printk145drivers/net/smc-ultra.cprintk("smc-ultra.c: Passed a NULL device.\n");
printk150drivers/net/smc-ultra.cprintk(version);
printk154drivers/net/smc-ultra.cprintk("%s: %s at %#3x,", dev->name, model_name, ioaddr);
printk157drivers/net/smc-ultra.cprintk(" %2.2X", dev->dev_addr[i] = inb(ioaddr + 8 + i));
printk180drivers/net/smc-ultra.cprintk(", failed to detect IRQ line.\n");
printk189drivers/net/smc-ultra.cprintk (", no memory for dev->priv.\n");
printk217drivers/net/smc-ultra.cprintk(",%s IRQ %d memory %#lx-%#lx.\n", eeprom_irq ? "" : "assigned ",
printk253drivers/net/smc-ultra.cif (ei_debug > 1) printk("resetting Ultra, t=%ld...", jiffies);
printk258drivers/net/smc-ultra.cif (ei_debug > 1) printk("reset done\n");
printk330drivers/net/smc-ultra.cprintk("%s: Shutting down ethercard.\n", dev->name);
printk378drivers/net/smc-ultra.cprintk(KERN_NOTICE "smc-ultra.c: Presently autoprobing (not recommended) for a single card.\n");
printk381drivers/net/smc-ultra.cprintk(KERN_WARNING "smc-ultra.c: No SMC Ultra card found (i/o = 0x%x).\n", io[this_dev]);
printk233drivers/net/sunlance.cprintk ("TX rings:\n");
printk244drivers/net/sunlance.cif (ZERO) printk ("%d: 0x%8.8x\n", i, leptr);
printk248drivers/net/sunlance.cif (ZERO) printk ("RX rings:\n");
printk258drivers/net/sunlance.cif (ZERO) printk ("%d: 0x%8.8x\n", i, leptr);
printk267drivers/net/sunlance.cif (ZERO) printk ("RX ptr: %8.8x\n", leptr);
printk273drivers/net/sunlance.cif (ZERO) printk ("TX ptr: %8.8x\n", leptr);
printk292drivers/net/sunlance.cprintk ("LANCE unopened after %d ticks, csr0=%4.4x.\n", i, ll->rdp);
printk299drivers/net/sunlance.cprintk ("LANCE opened after %d ticks, csr0=%4.4x\n", i, ll->rdp);
printk315drivers/net/sunlance.cprintk ("[");
printk318drivers/net/sunlance.cprintk ("%s", ib->brx_ring [i].rmd1_bits & LE_R1_OWN ? "_" : "X");
printk320drivers/net/sunlance.cprintk ("%s", ib->brx_ring [i].rmd1_bits & LE_R1_OWN ? "." : "1");
printk322drivers/net/sunlance.cprintk ("]");
printk352drivers/net/sunlance.cprintk ("%s: Memory squeeze, deferring packet.\n", dev->name);
printk378drivers/net/sunlance.cprintk ("Incomplete frame\n");
printk392drivers/net/sunlance.cprintk ("%s: Memory squeeze, deferring packet.\n", dev->name);
printk445drivers/net/sunlance.cprintk ("%s: Tx: ERR_BUF|ERR_UFL, restarting\n", dev->name);
printk473drivers/net/sunlance.cprintk ("%s: again", dev->name);
printk521drivers/net/sunlance.cprintk ("Lance: Can't get irq %d\n", dev->irq);
printk550drivers/net/sunlance.cprintk("Unable to add NFS server route.\n");
printk588drivers/net/sunlance.cprintk ("Lance stopped: csr0=%4.4x\n", ll->rdp);
printk598drivers/net/sunlance.cprintk ("Lance restart=%d\n", status);
printk618drivers/net/sunlance.cprintk ("%s: trasmit timed out, status %04x, resetting\n",
printk627drivers/net/sunlance.cprintk ("skb is NULL\n");
printk632drivers/net/sunlance.cprintk ("skb len is %ld\n", skb->len);
printk640drivers/net/sunlance.cprintk ("Transmitter access conflict.\n");
printk653drivers/net/sunlance.cif ((i % 16) == 0) printk ("\n");
printk654drivers/net/sunlance.cprintk ("%2.2x ", skb->data [i]);
printk706drivers/net/sunlance.cprintk ("Ignoring set_multicast\n");
printk728drivers/net/sunlance.cprintk ("Lance probe...0x%p\n", SBus_chain);
printk742drivers/net/sunlance.cprintk ("LANCE buffer @0x0. You don't really want this\n");
printk748drivers/net/sunlance.cprintk (version);
printk750drivers/net/sunlance.cprintk ("%s: LANCE ", dev->name);
printk759drivers/net/sunlance.cprintk ("%2.2x%c", dev->dev_addr [i] = idprom->id_eaddr [i], i == 5 ? ' ': ':');
printk777drivers/net/sunlance.cprintk(" **ERROR** LANCE Rx and Tx rings not on even boundary.\n");
printk191drivers/net/tulip.cprintk("Found DEC PCI Tulip at I/O %#lx, IRQ %d.\n",
printk203drivers/net/tulip.cprintk("tulip: This driver does not yet install properly from module!\n");
printk216drivers/net/tulip.cprintk(version);
printk220drivers/net/tulip.cprintk("%s: DEC 21040 Tulip at %#3x,", dev->name, ioaddr);
printk237drivers/net/tulip.cprintk(" %2.2x", dev->dev_addr[i] = value);
printk239drivers/net/tulip.cprintk(", IRQ %d\n", irq);
printk291drivers/net/tulip.cprintk("%s: tulip_open() irq %d.\n", dev->name, dev->irq);
printk340drivers/net/tulip.cprintk("%s: Done tulip_open(), CSR0 %8.8x, CSR13 %8.8x.\n",
printk388drivers/net/tulip.cprintk("%s: transmit timed out, status %8.8x, SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n",
printk391drivers/net/tulip.cprintk("  Rx ring %8.8x: ", (int)tp->rx_ring);
printk393drivers/net/tulip.cprintk(" %8.8x", (unsigned int)tp->rx_ring[i].status);
printk394drivers/net/tulip.cprintk("\n  Tx ring %8.8x: ", (int)tp->tx_ring);
printk396drivers/net/tulip.cprintk(" %8.8x", (unsigned int)tp->tx_ring[i].status);
printk397drivers/net/tulip.cprintk("\n");
printk407drivers/net/tulip.cprintk("%s: Obsolete driver layer request made: skbuff==NULL.\n",
printk417drivers/net/tulip.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk454drivers/net/tulip.cprintk ("tulip_interrupt(): irq %d for unknown device.\n", irq);
printk461drivers/net/tulip.cprintk("%s: Re-entering the interrupt handler.\n", dev->name);
printk471drivers/net/tulip.cprintk("%s: interrupt  csr5=%#8.8x new csr5=%#8.8x.\n",
printk516drivers/net/tulip.cprintk("out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
printk541drivers/net/tulip.cprintk("%s: Something Wicked happened! %8.8x.\n",
printk547drivers/net/tulip.cprintk("%s: Too much work at interrupt, csr5=0x%8.8x.\n",
printk556drivers/net/tulip.cprintk("%s: exiting interrupt, csr5=%#4.4x.\n",
printk563drivers/net/tulip.cprintk("%s: Emergency stop, looping startup interrupt.\n",
printk581drivers/net/tulip.cprintk(" In tulip_rx().\n");
printk587drivers/net/tulip.cprintk("  tulip_rx() status was %8.8x.\n", status);
printk589drivers/net/tulip.cprintk("%s: Ethernet frame spanned multiple buffers, status %8.8x!\n",
printk605drivers/net/tulip.cprintk("%s: Memory squeeze, deferring packet.\n", dev->name);
printk644drivers/net/tulip.cprintk("%s: Shutting down ethercard, status was %2.2x.\n",
printk685drivers/net/tulip.cprintk("%s: Promiscuous mode enabled.\n", dev->name);
printk733drivers/net/tulip.cprintk("%s: Setting MAC address to ", dev->name);
printk735drivers/net/tulip.cprintk(" %2.2x", dev->dev_addr[i] = sa->sa_data[i]);
printk736drivers/net/tulip.cprintk(".\n");
printk754drivers/net/tulip.cprintk("tulip: Sorry, modularization is not completed\n");
printk758drivers/net/tulip.cprintk("tulip: You should not use auto-probing with insmod!\n");
printk762drivers/net/tulip.cprintk("tulip: register_netdev() returned non-zero.\n");
printk66drivers/net/tunnel.cprintk ( KERN_INFO "tunnel: version v0.1a\n" );
printk102drivers/net/tunnel.cprintk("IP packet:\n");
printk103drivers/net/tunnel.cprintk("--- header len = %d\n", ip->ihl*4);
printk104drivers/net/tunnel.cprintk("--- ip version: %d\n", ip->version);
printk105drivers/net/tunnel.cprintk("--- ip protocol: %d\n", ip->protocol);
printk107drivers/net/tunnel.cprintk("--- source address: %u.%u.%u.%u\n", 
printk110drivers/net/tunnel.cprintk("--- destination address: %u.%u.%u.%u\n", 
printk112drivers/net/tunnel.cprintk("--- total packet len: %d\n", ntohs(ip->tot_len));
printk157drivers/net/tunnel.cprintk("%s: packet sent through tunnel to never-never land!\n", dev->name);
printk169drivers/net/tunnel.cprintk("%s: Bad IP packet: ip version %d\n", dev->name, iph->version);
printk185drivers/net/tunnel.cprintk("%s: Warning: IP routing loop!\n", dev->name);
printk193drivers/net/tunnel.cprintk("%s: Received inbound packet -- not handled.\n",dev->name);
printk200drivers/net/tunnel.cprintk("Old IP Header....\n");
printk211drivers/net/tunnel.cprintk("%s: No free memory.\n",dev->name);
printk243drivers/net/tunnel.cprintk("New IP Header....\n");
printk248drivers/net/tunnel.cprintk("tunnel: calling ip_forward()\n");
printk255drivers/net/tunnel.cprintk("Packet sent through tunnel interface!\n");
printk261drivers/net/tunnel.cprintk("tunnel: Updated usage statistics.\n");
printk299drivers/net/tunnel.cprintk("tunnel: registering device %s\n", dev_tunnel.name);
printk486drivers/net/wavelan.cprintk("%s: wavelan_ack(): board not accepting command.\n", dev->name);
printk522drivers/net/wavelan.cprintk("%s: %s failed; status = 0x%x\n", dev->name, str, cb.ac_status);
printk548drivers/net/wavelan.cprintk("%s: ->wavelan_hardware_reset(dev=0x%x)\n", dev->name, (unsigned int)dev);
printk608drivers/net/wavelan.cprintk("%s: wavelan_hardware_reset(): iscp_busy timeout.\n", dev->name);
printk610drivers/net/wavelan.cprintk("%s: <-wavelan_hardware_reset(): -1\n", dev->name);
printk626drivers/net/wavelan.cprintk("%s: wavelan_hardware_reset(): status: expected 0x%02x, got 0x%02x.\n", dev->name, SCB_ST_CX | SCB_ST_CNA, scb.scb_status);
printk628drivers/net/wavelan.cprintk("%s: <-wavelan_hardware_reset(): -1\n", dev->name);
printk642drivers/net/wavelan.cprintk("%s: <-wavelan_hardware_reset(): -1\n", dev->name);
printk649drivers/net/wavelan.cprintk("%s: wavelan_hardware_reset(): i82586 Self Test failed.\n", dev->name);
printk651drivers/net/wavelan.cprintk("%s: <-wavelan_hardware_reset(): -1\n", dev->name);
printk714drivers/net/wavelan.cprintk("%s: <-wavelan_hardware_reset(): -1\n", dev->name);
printk728drivers/net/wavelan.cprintk("%s: <-wavelan_hardware_reset(): -1\n", dev->name);
printk742drivers/net/wavelan.cprintk("%s: <-wavelan_hardware_reset(): 0\n", dev->name);
printk791drivers/net/wavelan.cprintk("%s: ->wavelan_probe(dev=0x%x (base_addr=0x%x))\n", dev->name, (unsigned int)dev, (unsigned int)dev->base_addr);
printk796drivers/net/wavelan.cprintk("%s: structure/compiler botch: \"%s\"\n", dev->name, wavelan_struct_check());
printk799drivers/net/wavelan.cprintk("%s: <-wavelan_probe(): ENODEV\n", dev->name);
printk813drivers/net/wavelan.cprintk("%s: <-wavelan_probe(): ENXIO\n", dev->name);
printk824drivers/net/wavelan.cprintk("%s: <-wavelan_probe(): %d\n", dev->name, r);
printk836drivers/net/wavelan.cprintk("%s: <-wavelan_probe(): 0\n", dev->name);
printk849drivers/net/wavelan.cprintk("%s: <-wavelan_probe(): ENODEV\n", dev->name);
printk865drivers/net/wavelan.cprintk("%s: ->wavelan_probe1(dev=0x%x, ioaddr=0x%x)\n", dev->name, (unsigned int)dev, ioaddr);
printk885drivers/net/wavelan.cprintk("%s: <-wavelan_probe1(): ENODEV\n", dev->name);
printk889drivers/net/wavelan.cprintk("%s: WaveLAN at %#x,", dev->name, ioaddr);
printk893drivers/net/wavelan.cprintk("[WARNING: explicit IRQ value %d ignored: using PSA value instead]", dev->irq);
printk898drivers/net/wavelan.cprintk(" could not wavelan_unmap_irq(%d, ..) -- ignored.\n", dev->irq);
printk911drivers/net/wavelan.cprintk(" could not wavelan_map_irq(%d).\n", psa.psa_int_req_no);
printk913drivers/net/wavelan.cprintk("%s: <-wavelan_probe1(): EAGAIN\n", dev->name);
printk949drivers/net/wavelan.cprintk("%s%02x", (i == 0) ? " " : ":", dev->dev_addr[i]);
printk951drivers/net/wavelan.cprintk(", IRQ %d", dev->irq);
printk953drivers/net/wavelan.cprintk(", promisc");
printk954drivers/net/wavelan.cprintk(", nwid 0x%02x%02x", psa.psa_nwid[0], psa.psa_nwid[1]);
printk956drivers/net/wavelan.cprintk(", PC");
printk961drivers/net/wavelan.cprintk("-AT");
printk966drivers/net/wavelan.cprintk("-MC");
printk970drivers/net/wavelan.cprintk("MCIA");
printk974drivers/net/wavelan.cprintk("???");
printk978drivers/net/wavelan.cprintk(", ");
printk982drivers/net/wavelan.cprintk("915");
printk986drivers/net/wavelan.cprintk("2425");
printk990drivers/net/wavelan.cprintk("2460");
printk994drivers/net/wavelan.cprintk("2484");
printk998drivers/net/wavelan.cprintk("2430.5");
printk1002drivers/net/wavelan.cprintk("???");
printk1005drivers/net/wavelan.cprintk(" MHz");
printk1007drivers/net/wavelan.cprintk("\n");
printk1010drivers/net/wavelan.cprintk(version);
printk1059drivers/net/wavelan.cprintk("%s: <-wavelan_probe1(): 0\n", dev->name);
printk1127drivers/net/wavelan.cprintk("%s: wavelan_ru_start(): board not accepting command.\n", dev->name);
printk1208drivers/net/wavelan.cprintk("%s: wavelan_cu_start(): board not accepting command.\n", dev->name);
printk1224drivers/net/wavelan.cprintk("%s: ->wavelan_open(dev=0x%x)\n", dev->name, (unsigned int)dev);
printk1232drivers/net/wavelan.cprintk("%s: <-wavelan_open(): -ENXIO\n", dev->name);
printk1248drivers/net/wavelan.cprintk("%s: <-wavelan_open(): -EAGAIN\n", dev->name);
printk1265drivers/net/wavelan.cprintk("%s: <-wavelan_open(): -EAGAIN(2)\n", dev->name);
printk1272drivers/net/wavelan.cprintk("%s: <-wavelan_open(): 0\n", dev->name);
printk1376drivers/net/wavelan.cprintk
printk1420drivers/net/wavelan.cprintk("%s: transmit timed out -- resetting board.\n", dev->name);
printk1450drivers/net/wavelan.cprintk("%s: Transmitter access conflict.\n", dev->name);
printk1521drivers/net/wavelan.cprintk("%s: frame not received successfully.\n", dev->name);
printk1529drivers/net/wavelan.cprintk("%s: no EOF flag.\n", dev->name);
printk1534drivers/net/wavelan.cprintk("%s: frame too short.\n", dev->name);
printk1540drivers/net/wavelan.cprintk("%s: rx DMA overrun.\n", dev->name);
printk1546drivers/net/wavelan.cprintk("%s: ran out of resources.\n", dev->name);
printk1552drivers/net/wavelan.cprintk("%s: alignment error.\n", dev->name);
printk1558drivers/net/wavelan.cprintk("%s: CRC error.\n", dev->name);
printk1563drivers/net/wavelan.cprintk("%s: frame has no data.\n", dev->name);
printk1569drivers/net/wavelan.cprintk("%s: missing EOF flag.\n", dev->name);
printk1572drivers/net/wavelan.cprintk("%s: missing F flag.\n", dev->name);
printk1595drivers/net/wavelan.cprintk("%s: foreign MAC source addr=", dev->name);
printk1597drivers/net/wavelan.cprintk("%s%02x", (i == 0) ? "" : ":", addr[i]);
printk1598drivers/net/wavelan.cprintk("\n");
printk1610drivers/net/wavelan.cprintk("%s: fd_dest=", dev->name);
printk1612drivers/net/wavelan.cprintk("%s%02x", (i == 0) ? "" : ":", fd.fd_dest[i]);
printk1613drivers/net/wavelan.cprintk("\n");
printk1615drivers/net/wavelan.cprintk("%s: fd_src=", dev->name);
printk1617drivers/net/wavelan.cprintk("%s%02x", (i == 0) ? "" : ":", fd.fd_src[i]);
printk1618drivers/net/wavelan.cprintk("\n");
printk1619drivers/net/wavelan.cprintk("%s: fd_length=%d\n", dev->name, fd.fd_length);
printk1623drivers/net/wavelan.cprintk("%s: dest=", dev->name);
printk1625drivers/net/wavelan.cprintk("%s%02x", (i == 0) ? "" : ":", addr[i]);
printk1626drivers/net/wavelan.cprintk("\n");
printk1629drivers/net/wavelan.cprintk("%s: src=", dev->name);
printk1631drivers/net/wavelan.cprintk("%s%02x", (i == 0) ? "" : ":", addr[i]);
printk1632drivers/net/wavelan.cprintk("\n");
printk1635drivers/net/wavelan.cprintk("%s: ntohs(length/type)=0x%04x\n", dev->name, ntohs(ltype));
printk1642drivers/net/wavelan.cprintk("%s: could not alloc_skb(%d, GFP_ATOMIC).\n", dev->name, sksize);
printk1656drivers/net/wavelan.cprintk("%s: pkt_len=%d, data=\"", dev->name, pkt_len);
printk1667drivers/net/wavelan.cprintk(" %c", skb->data[i]);
printk1669drivers/net/wavelan.cprintk("%02x", skb->data[i]);
printk1673drivers/net/wavelan.cprintk("..");
printk1675drivers/net/wavelan.cprintk("\"\n\n");
printk1765drivers/net/wavelan.cprintk("%s:     tx error: no CS.\n", dev->name);
printk1770drivers/net/wavelan.cprintk("%s:     tx error: lost CTS.\n", dev->name);
printk1775drivers/net/wavelan.cprintk("%s:     tx error: slow DMA.\n", dev->name);
printk1781drivers/net/wavelan.cprintk("%s:     tx error: heart beat.\n", dev->name);
printk1787drivers/net/wavelan.cprintk("%s:     tx error: too many collisions.\n", dev->name);
printk1792drivers/net/wavelan.cprintk("%s:     tx completed, tx_status 0x%04x.\n", dev->name, tx_status);
printk1845drivers/net/wavelan.cprintk("%s: warning: wavelan_watchdog(): %d reaped, %d remain.\n", dev->name, nreaped, lp->tx_n_in_use);
printk1870drivers/net/wavelan.cprintk("wavelan_interrupt(): irq %d for unknown device.\n", irq);
printk1889drivers/net/wavelan.cprintk("%s: warning: wavelan_interrupt(): unexpected mmc interrupt: status 0x%04x.\n", dev->name, dce_status);
printk1896drivers/net/wavelan.cprintk("%s: warning: wavelan_interrupt() but (hasr & HASR_82586_INTR) == 0.\n", dev->name);
printk1912drivers/net/wavelan.cprintk("%s: interrupt, status 0x%04x.\n", dev->name, status);
printk1920drivers/net/wavelan.cprintk("%s: command completed.\n", dev->name);
printk1930drivers/net/wavelan.cprintk("%s: received packet.\n", dev->name);
printk1941drivers/net/wavelan.cprintk("%s: warning: CU inactive -- restarting.\n", dev->name);
printk1953drivers/net/wavelan.cprintk("%s: warning: RU not ready -- restarting.\n", dev->name);
printk1970drivers/net/wavelan.cprintk("%s: ->wavelan_close(dev=0x%x)\n", dev->name, (unsigned int)dev);
printk1998drivers/net/wavelan.cprintk("%s: <-wavelan_close(): 0\n", dev->name);
printk2026drivers/net/wavelan.cprintk("%s: ->wavelan_set_multicast_list(dev=0x%x)", dev->name, dev);
printk2060drivers/net/wavelan.cprintk("%s: <-wavelan_set_multicast_list()\n", dev->name);
printk2211drivers/net/wavelan.cprintk("%d: 0x%x:", i, p);
printk2214drivers/net/wavelan.cprintk(" status=0x%x,", actx.tx_h.ac_status);
printk2215drivers/net/wavelan.cprintk(" command=0x%x,", actx.tx_h.ac_command);
printk2226drivers/net/wavelan.cprintk("|");
printk2234drivers/net/wavelan.cprintk("psa:");
printk2236drivers/net/wavelan.cprintk("psa_io_base_addr_1: 0x%02x,", p->psa_io_base_addr_1);
printk2237drivers/net/wavelan.cprintk("psa_io_base_addr_2: 0x%02x,", p->psa_io_base_addr_2);
printk2238drivers/net/wavelan.cprintk("psa_io_base_addr_3: 0x%02x,", p->psa_io_base_addr_3);
printk2239drivers/net/wavelan.cprintk("psa_io_base_addr_4: 0x%02x,", p->psa_io_base_addr_4);
printk2240drivers/net/wavelan.cprintk("psa_rem_boot_addr_1: 0x%02x,", p->psa_rem_boot_addr_1);
printk2241drivers/net/wavelan.cprintk("psa_rem_boot_addr_2: 0x%02x,", p->psa_rem_boot_addr_2);
printk2242drivers/net/wavelan.cprintk("psa_rem_boot_addr_3: 0x%02x,", p->psa_rem_boot_addr_3);
printk2243drivers/net/wavelan.cprintk("psa_holi_params: 0x%02x,", p->psa_holi_params);
printk2244drivers/net/wavelan.cprintk("psa_int_req_no: %d,", p->psa_int_req_no);
printk2245drivers/net/wavelan.cprintk
printk2255drivers/net/wavelan.cprintk
printk2265drivers/net/wavelan.cprintk("psa_univ_local_sel: %d,", p->psa_univ_local_sel);
printk2266drivers/net/wavelan.cprintk("psa_comp_number: %d,", p->psa_comp_number);
printk2267drivers/net/wavelan.cprintk("psa_thr_pre_set: 0x%02x,", p->psa_thr_pre_set);
printk2268drivers/net/wavelan.cprintk("psa_feature_select/decay_prm: 0x%02x,", p->psa_feature_select);
printk2269drivers/net/wavelan.cprintk("psa_subband/decay_update_prm: %d,", p->psa_subband);
printk2270drivers/net/wavelan.cprintk("psa_quality_thr: 0x%02x,", p->psa_quality_thr);
printk2271drivers/net/wavelan.cprintk("psa_mod_delay: 0x%02x,", p->psa_mod_delay);
printk2272drivers/net/wavelan.cprintk("psa_nwid: 0x%02x%02x,", p->psa_nwid[0], p->psa_nwid[1]);
printk2273drivers/net/wavelan.cprintk("psa_undefined: %d,", p->psa_undefined);
printk2274drivers/net/wavelan.cprintk("psa_encryption_select: %d,", p->psa_encryption_select);
printk2275drivers/net/wavelan.cprintk
printk2287drivers/net/wavelan.cprintk("psa_databus_width: %d,", p->psa_databus_width);
printk2288drivers/net/wavelan.cprintk("psa_call_code/auto_squelch: 0x%02x,", p->psa_call_code);
printk2289drivers/net/wavelan.cprintk("psa_no_of_retries: %d,", p->psa_no_of_retries);
printk2290drivers/net/wavelan.cprintk("psa_acr: %d,", p->psa_acr);
printk2291drivers/net/wavelan.cprintk("psa_dump_count: %d,", p->psa_dump_count);
printk2292drivers/net/wavelan.cprintk("psa_nwid_prefix: 0x%02x,", p->psa_nwid_prefix);
printk2293drivers/net/wavelan.cprintk("psa_conf_status: %d,", p->psa_conf_status);
printk2294drivers/net/wavelan.cprintk("psa_crc: 0x%02x%02x,", p->psa_crc[0], p->psa_crc[1]);
printk2295drivers/net/wavelan.cprintk("psa_crc_status: 0x%02x,", p->psa_crc_status);
printk2297drivers/net/wavelan.cprintk("\n");
printk2308drivers/net/wavelan.cprintk("mmr:");
printk2309drivers/net/wavelan.cprintk(" des_status: 0x%x", m.mmr_des_status);
printk2310drivers/net/wavelan.cprintk(" des_avail: 0x%x", m.mmr_des_avail);
printk2311drivers/net/wavelan.cprintk(" des_io_invert: 0x%x", m.mmr_des_io_invert);
printk2312drivers/net/wavelan.cprintk
printk2321drivers/net/wavelan.cprintk(" correct_nwid: %d", m.mmr_correct_nwid_h << 8 | m.mmr_correct_nwid_l);
printk2322drivers/net/wavelan.cprintk(" wrong_nwid: %d", (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l);
printk2323drivers/net/wavelan.cprintk(" thr_pre_set: 0x%x", m.mmr_thr_pre_set);
printk2324drivers/net/wavelan.cprintk(" signal_lvl: %d", m.mmr_signal_lvl);
printk2325drivers/net/wavelan.cprintk(" silence_lvl: %d", m.mmr_silence_lvl);
printk2326drivers/net/wavelan.cprintk(" sgnl_qual: 0x%x", m.mmr_sgnl_qual);
printk2327drivers/net/wavelan.cprintk(" netw_id_l: %x", m.mmr_netw_id_l);
printk2329drivers/net/wavelan.cprintk("\n");
printk2341drivers/net/wavelan.cprintk("scb:");
printk2343drivers/net/wavelan.cprintk(" status:");
printk2344drivers/net/wavelan.cprintk
printk2353drivers/net/wavelan.cprintk
printk2361drivers/net/wavelan.cprintk
printk2371drivers/net/wavelan.cprintk(" command:");
printk2372drivers/net/wavelan.cprintk
printk2381drivers/net/wavelan.cprintk
printk2391drivers/net/wavelan.cprintk
printk2402drivers/net/wavelan.cprintk(" cbl_offset 0x%x", scb.scb_cbl_offset);
printk2403drivers/net/wavelan.cprintk(" rfa_offset 0x%x", scb.scb_rfa_offset);
printk2405drivers/net/wavelan.cprintk(" crcerrs %d", scb.scb_crcerrs);
printk2406drivers/net/wavelan.cprintk(" alnerrs %d", scb.scb_alnerrs);
printk2407drivers/net/wavelan.cprintk(" rscerrs %d", scb.scb_rscerrs);
printk2408drivers/net/wavelan.cprintk(" ovrnerrs %d", scb.scb_ovrnerrs);
printk2410drivers/net/wavelan.cprintk("\n");
printk2421drivers/net/wavelan.cprintk("ru:");
printk2425drivers/net/wavelan.cprintk("\n");
printk2438drivers/net/wavelan.cprintk("cu:");
printk2439drivers/net/wavelan.cprintk("\n");
printk2455drivers/net/wavelan.cprintk("dev:");
printk2456drivers/net/wavelan.cprintk(" start=%d,", dev->start);
printk2457drivers/net/wavelan.cprintk(" tbusy=%ld,", dev->tbusy);
printk2458drivers/net/wavelan.cprintk(" interrupt=%d,", dev->interrupt);
printk2459drivers/net/wavelan.cprintk(" trans_start=%ld,", dev->trans_start);
printk2460drivers/net/wavelan.cprintk(" flags=0x%x,", dev->flags);
printk2461drivers/net/wavelan.cprintk("\n");
printk2472drivers/net/wavelan.cprintk("local:");
printk2473drivers/net/wavelan.cprintk(" tx_n_in_use=%d,", lp->tx_n_in_use);
printk2474drivers/net/wavelan.cprintk(" hacr=0x%x,", lp->hacr);
printk2475drivers/net/wavelan.cprintk(" rx_head=0x%x,", lp->rx_head);
printk2476drivers/net/wavelan.cprintk(" rx_last=0x%x,", lp->rx_last);
printk2477drivers/net/wavelan.cprintk(" tx_first_free=0x%x,", lp->tx_first_free);
printk2478drivers/net/wavelan.cprintk(" tx_first_in_use=0x%x,", lp->tx_first_in_use);
printk2479drivers/net/wavelan.cprintk("\n");
printk128drivers/net/wd.cprintk("wd.c: Passed a NULL device.\n");
printk134drivers/net/wd.cprintk(KERN_WARNING "wd.c: user supplied mem_start or mem_end not on 8kB boundary - ignored.\n");
printk140drivers/net/wd.cprintk(version);
printk142drivers/net/wd.cprintk("%s: WD80x3 at %#3x, ", dev->name, ioaddr);
printk144drivers/net/wd.cprintk(" %2.2X", dev->dev_addr[i] = inb(ioaddr + 8 + i));
printk196drivers/net/wd.cprintk("\nWD80?3: Bus width conflict, %d (probe) != %d (reg report).",
printk211drivers/net/wd.cprintk(" assigning address %#lx", dev->mem_start);
printk246drivers/net/wd.cprintk(" autoirq is %d", dev->irq);
printk257drivers/net/wd.cprintk (" unable to get IRQ %d.\n", dev->irq);
printk263drivers/net/wd.cprintk (" unable to get memory for dev->priv.\n");
printk288drivers/net/wd.cprintk(" %s, IRQ %d, shared memory at %#lx-%#lx.\n",
printk334drivers/net/wd.cif (ei_debug > 1) printk("resetting the WD80x3 t=%lu...", jiffies);
printk342drivers/net/wd.cif (ei_debug > 1) printk("reset done\n");
printk421drivers/net/wd.cprintk("%s: Shutting down ethercard.\n", dev->name);
printk472drivers/net/wd.cprintk(KERN_NOTICE "wd.c: Presently autoprobing (not recommended) for a single card.\n");
printk475drivers/net/wd.cprintk(KERN_WARNING "wd.c: No wd80x3 card found (i/o = 0x%x).\n", io[this_dev]);
printk215drivers/net/znet.cprintk(KERN_INFO "No Z-Note ethernet adaptor found.\n");
printk222drivers/net/znet.cprintk(KERN_INFO "%s: ZNET at %#3lx,", dev->name, dev->base_addr);
printk226drivers/net/znet.cprintk(" %2.2x", dev->dev_addr[i] = netinfo->netid[i]);
printk228drivers/net/znet.cprintk(", using IRQ %d DMA %d and %d.\n", dev->irq, netinfo->dma1,
printk232drivers/net/znet.cprintk(KERN_INFO "%s: vendor '%16.16s' IRQ1 %d IRQ2 %d DMA1 %d DMA2 %d.\n",
printk236drivers/net/znet.cprintk(KERN_INFO "%s: iobase1 %#x size %d iobase2 %#x size %d net type %2.2x.\n",
printk242drivers/net/znet.cprintk("%s%s", KERN_INFO, version);
printk252drivers/net/znet.cprintk(KERN_WARNING "%s: Not opened -- resource busy?!?\n", dev->name);
printk291drivers/net/znet.cprintk(KERN_DEBUG "%s: znet_open() called.\n", dev->name);
printk306drivers/net/znet.cprintk(KERN_WARNING "%s: Problem turning on the transceiver power.\n",
printk322drivers/net/znet.cprintk(KERN_DEBUG "%s: ZNet_send_packet(%ld).\n", dev->name, dev->tbusy);
printk334drivers/net/znet.cprintk(KERN_WARNING "%s: transmit timed out, status %02x %04x %04x %02x,"
printk337drivers/net/znet.cprintk(KERN_WARNING "%s: Tx carrier error, check transceiver cable.\n",
printk358drivers/net/znet.cprintk(KERN_WARNING "%s: Transmitter access conflict.\n", dev->name);
printk371drivers/net/znet.cprintk(KERN_WARNING "Address mismatch at Tx: %#x vs %#x.\n",
printk398drivers/net/znet.cprintk(KERN_DEBUG "%s: Transmitter queued, length %d.\n", dev->name, length);
printk412drivers/net/znet.cprintk(KERN_WARNING "znet_interrupt(): IRQ %d for unknown device.\n", irq);
printk430drivers/net/znet.cprintk(KERN_DEBUG "%s: interrupt, status %02x, %04x %04x %02x serial %d.\n",
printk483drivers/net/znet.cprintk(KERN_WARNING "%s: Interrupted, but nothing to receive, offset %03x.\n",
printk514drivers/net/znet.cprintk(KERN_DEBUG "Constructing trailer at location %03x, %04x %04x %04x %04x"
printk534drivers/net/znet.cprintk(KERN_DEBUG "Looking at trailer ending at %04x status %04x length %03x"
printk554drivers/net/znet.cprintk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name);
printk569drivers/net/znet.cprintk(KERN_DEBUG "Packet data is %08x %08x %08x %08x.\n", packet[0],
printk609drivers/net/znet.cprintk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name);
printk670drivers/net/znet.cprintk("Addr: %04x cnt:%3x...", addr<<1, get_dma_residue(zn.tx_dma));
printk702drivers/net/znet.cprintk(KERN_DEBUG "%s: Initializing the i82593, tx buf %p... ", dev->name,
printk708drivers/net/znet.cprintk("stat:%02x ", inb(ioaddr)); show_dma();
printk713drivers/net/znet.cprintk("stat:%02x ", inb(ioaddr)); show_dma();
printk718drivers/net/znet.cprintk("stat:%02x ", inb(ioaddr)); show_dma();
printk720drivers/net/znet.cprintk("stat:%02x ", inb(ioaddr)); show_dma();
printk723drivers/net/znet.cif (znet_debug > 1)  printk("enabling Rx.\n");
printk732drivers/net/znet.cprintk(KERN_DEBUG "Updating stop hit with value %02x.\n",
printk478drivers/pci/pci.cprintk("PCI bridge optimization.\n");
printk480drivers/pci/pci.cprintk("    %s: ", bridge_optimization[i].type);
printk483drivers/pci/pci.cprintk("Not supported.");
printk487drivers/pci/pci.cprintk("%s.", bridge_optimization[i].on);
printk493drivers/pci/pci.cprintk("Changed!  Now %s.", bridge_optimization[i].off);
printk496drivers/pci/pci.cprintk("%s.", bridge_optimization[i].off);
printk502drivers/pci/pci.cprintk("Changed!  Now %s.", bridge_optimization[i].on);
printk506drivers/pci/pci.cprintk("\n");
printk689drivers/pci/pci.cprintk("...pci_malloc(size=%ld,mem=%p)", size, *mem_startp);
printk707drivers/pci/pci.cprintk("...scan_bus(busno=%d,mem=%p)\n", bus->number, *mem_startp);
printk749drivers/pci/pci.cprintk("Warning : Unknown PCI device (%x:%x).  Please read include/linux/pci.h \n",
printk860drivers/pci/pci.cprintk("pci_init: no BIOS32 detected\n");
printk864drivers/pci/pci.cprintk("Probing PCI hardware.\n");
printk877drivers/pci/pci.cprintk("%s\n", (char *) mem_start);
printk606drivers/scsi/53c7,8xx.cprintk ("53c7,7x0.c:internal_setup() : too many overrides\n");
printk669drivers/scsi/53c7,8xx.cprintk (KERN_ALERT "scsi%d not found\n", host);
printk672drivers/scsi/53c7,8xx.cprintk (KERN_ALERT "scsi%d is not a NCR board\n", host);
printk698drivers/scsi/53c7,8xx.cprintk (KERN_ALERT "target %d is bogus\n", target);
printk704drivers/scsi/53c7,8xx.cprintk (KERN_ALERT "target %d is host ID\n", target);
printk709drivers/scsi/53c7,8xx.cprintk (KERN_ALERT "target %d exceeds maximum of %d\n", target,
printk720drivers/scsi/53c7,8xx.cprintk (KERN_ALERT "target %d allready doing SDTR\n", target);
printk907drivers/scsi/53c7,8xx.cprintk ("scsi%d : chip type of %d is not supported yet, detaching.\n",
printk923drivers/scsi/53c7,8xx.cprintk ("scsi%d : using %s mapped access\n", host->host_no, 
printk958drivers/scsi/53c7,8xx.cprintk("scsi%d : initiator ID was %d, changing to 7\n",
printk966drivers/scsi/53c7,8xx.cprintk("scsi%d : using initiator ID %d\n", host->host_no,
printk1016drivers/scsi/53c7,8xx.cprintk ("scsi%d : burst mode disabled\n", host->host_no);
printk1025drivers/scsi/53c7,8xx.cprintk ("scsi%d : burst length %d\n", host->host_no, i);
printk1041drivers/scsi/53c7,8xx.cprintk ("scsi%d : reset ccf to %d from %d\n", 
printk1058drivers/scsi/53c7,8xx.cprintk ("scsi%d : clock conversion factor %d unknown.\n"
printk1066drivers/scsi/53c7,8xx.cprintk ("scsi%d : using %dMHz SCSI clock\n", host->host_no, 
printk1116drivers/scsi/53c7,8xx.cprintk("scsi%d : IRQ%d not free, detaching\n"
printk1126drivers/scsi/53c7,8xx.cprintk("scsi%d : using interrupt handler previously installed for scsi%d\n",
printk1144drivers/scsi/53c7,8xx.cprintk ("scsi%d : bus wedge, doing SCSI reset\n", host->host_no);
printk1195drivers/scsi/53c7,8xx.cprintk("scsi-ncr53c7,8xx : unsupported SCSI chip %d\n", chip);
printk1199drivers/scsi/53c7,8xx.cprintk("scsi-ncr53c7,8xx : %s at memory 0x%x, io 0x%x, irq %d",
printk1202drivers/scsi/53c7,8xx.cprintk("\n");
printk1204drivers/scsi/53c7,8xx.cprintk(", dma %d\n", dma);
printk1207drivers/scsi/53c7,8xx.cprintk ("scsi-ncr53c7,8xx : for better reliability and performance, please use the\n" 
printk1213drivers/scsi/53c7,8xx.cprintk ("scsi-ncr53c7,8xx : probe only enabled, aborting initialization\n");
printk1311drivers/scsi/53c7,8xx.cprintk ("scsi%d : not initializing, no I/O or memory mapping known \n",
printk1405drivers/scsi/53c7,8xx.cprintk("scsi-ncr53c7,8xx : at PCI bus %d, device %d,  function %d\n",
printk1410drivers/scsi/53c7,8xx.cprintk("scsi-ncr53c7,8xx : not initializing due to lack of PCI BIOS,\n"
printk1429drivers/scsi/53c7,8xx.cprintk ("scsi-ncr53c7,8xx : error %s not initializing due to error reading configuration space\n"
printk1438drivers/scsi/53c7,8xx.cprintk ("scsi-ncr53c7,8xx : not initializing, 0x%04x is not NCR vendor ID\n",
printk1452drivers/scsi/53c7,8xx.cprintk ("scsi-ncr53c7,8xx : disabling I/O mapping since base address 0 (0x%x)\n"
printk1464drivers/scsi/53c7,8xx.cprintk("scsi-ncr53c7,8xx : disabling memory mapping since base address 1\n"
printk1474drivers/scsi/53c7,8xx.cprintk ("scsi-ncr53c7,8xx : not initializing, both I/O and memory mappings disabled\n");
printk1479drivers/scsi/53c7,8xx.cprintk ("scsi-ncr53c7,8xx : not initializing, BUS MASTERING was disabled\n");
printk1494drivers/scsi/53c7,8xx.cprintk ("scsi-ncr53c7,8xx : warning : device id of 0x%04x doesn't\n"
printk1499drivers/scsi/53c7,8xx.cprintk ("scsi-ncr53c7,8xx : warning : revision of %d is greater than %d.\n",
printk1502drivers/scsi/53c7,8xx.cprintk ("scsi-ncr53c7,8xx : warning : revision of %d is less than %d.\n",
printk1506drivers/scsi/53c7,8xx.cprintk ("scsi-ncr53c7,8xx : IO region 0x%x to 0x%x is in use\n",
printk1788drivers/scsi/53c7,8xx.cprintk("scsi%d : NCR dsa_fields start is %d not %d\n",
printk1792drivers/scsi/53c7,8xx.cprintk("scsi%d : NCR code relocated to 0x%lx (virt 0x%p)\n", host->host_no,
printk1827drivers/scsi/53c7,8xx.cprintk ("scsi%d : chip not idle, aborting tests\n", host->host_no);
printk1846drivers/scsi/53c7,8xx.cprintk ("scsi%d : test 1", host->host_no);
printk1848drivers/scsi/53c7,8xx.cprintk (" started\n");
printk1864drivers/scsi/53c7,8xx.cprintk ("scsi%d : driver test 1 timed out%s\n",host->host_no ,
printk1875drivers/scsi/53c7,8xx.cprintk ("scsi%d : test 1 bad interrupt value (%d)\n", 
printk1881drivers/scsi/53c7,8xx.cprintk ("scsi%d : driver test 1 read 0x%x instead of 0xdeadbeef indicating a\n"
printk1888drivers/scsi/53c7,8xx.cprintk ("scsi%d : DSP = 0x%p (script at 0x%px, start at 0x%x)\n",
printk1891drivers/scsi/53c7,8xx.cprintk ("scsi%d : DSPS = 0x%x\n", host->host_no,
printk1926drivers/scsi/53c7,8xx.cprintk ("scsi%d : chip not idle, aborting tests\n", host->host_no);
printk1949drivers/scsi/53c7,8xx.cprintk ("scsi%d : test 2 INQUIRY to target %d, lun 0 : %s\n",
printk1951drivers/scsi/53c7,8xx.cprintk ("scsi%d : status ", host->host_no);
printk1953drivers/scsi/53c7,8xx.cprintk ("\nscsi%d : message ", host->host_no);
printk1955drivers/scsi/53c7,8xx.cprintk ("\n");
printk1957drivers/scsi/53c7,8xx.cprintk("scsi%d : test 2 no connection with target %d\n",
printk1960drivers/scsi/53c7,8xx.cprintk("scsi%d : not idle\n", host->host_no);
printk1965drivers/scsi/53c7,8xx.cprintk ("scsi%d : test 2 timed out\n", host->host_no);
printk2096drivers/scsi/53c7,8xx.cprintk ("scsi%d: abnormal finished\n", host->host_no);
printk2139drivers/scsi/53c7,8xx.cprintk("scsi%d: loop detected in ncr reonncect list\n",
printk2143drivers/scsi/53c7,8xx.cprintk("scsi%d: scsi %ld in ncr issue array and reconnect lists\n",
printk2166drivers/scsi/53c7,8xx.cprintk ("scsi%d: loop detected in host running list for scsi pid %ld\n",
printk2257drivers/scsi/53c7,8xx.cprintk ("%speriod %dns offset %d %d.%02dMHz %s SCSI%s\n",
printk2262drivers/scsi/53c7,8xx.cprintk ("%sasynchronous SCSI\n", prefix);
printk2334drivers/scsi/53c7,8xx.cprintk ("scsi%d : target %d sync parameters are sxfer=0x%x, scntl3=0x%x\n",
printk2364drivers/scsi/53c7,8xx.cprintk ("scsi%d : setting target %d to asynchronous SCSI\n",
printk2426drivers/scsi/53c7,8xx.cprintk("scsi%d : optimal synchronous divisor of %d.%01d\n", 
printk2433drivers/scsi/53c7,8xx.cprintk("scsi%d : selected synchronous divisor of %d.%01d\n", 
printk2439drivers/scsi/53c7,8xx.cprintk("scsi%d : selected synchronous period of %dns\n", host->host_no,
printk2446drivers/scsi/53c7,8xx.cprintk ("scsi%d : sxfer=0x%x scntl3=0x%x\n", 
printk2480drivers/scsi/53c7,8xx.cprintk ("scsi%d : DSPS = 0x%x\n", host->host_no, dsps);
printk2495drivers/scsi/53c7,8xx.cprintk ("scsi%d : target %d rejected SDTR\n", host->host_no, 
printk2503drivers/scsi/53c7,8xx.cprintk ("scsi%d : extended contingent allegiance not supported yet, rejecting\n",
printk2511drivers/scsi/53c7,8xx.cprintk ("scsi%d : unsupported message, resjecting\n",
printk2518drivers/scsi/53c7,8xx.cprintk ("scsi%d : received message", host->host_no);
printk2520drivers/scsi/53c7,8xx.cprintk (" from target %d lun %d ", c->target, c->lun);
printk2522drivers/scsi/53c7,8xx.cprintk("\n");
printk2590drivers/scsi/53c7,8xx.cprintk ("scsi%d : unexpected phase\n", host->host_no);
printk2593drivers/scsi/53c7,8xx.cprintk ("scsi%d : selected by target %d\n", host->host_no,
printk2600drivers/scsi/53c7,8xx.cprintk ("scsi%d : unexpected reselect by target %d lun %d\n", 
printk2620drivers/scsi/53c7,8xx.cprintk ("scsi%d : CHECK CONDITION\n", host->host_no);
printk2622drivers/scsi/53c7,8xx.cprintk("scsi%d : CHECK CONDITION with no SCSI command\n",
printk2701drivers/scsi/53c7,8xx.cprintk("scsi%d : test%d complete\n", host->host_no,
printk2716drivers/scsi/53c7,8xx.cprintk("scsi%d : reselected_ok (DSA = 0x%x (virt 0x%p)\n", 
printk2718drivers/scsi/53c7,8xx.cprintk("scsi%d : resume address is 0x%x (virt 0x%p)\n",
printk2723drivers/scsi/53c7,8xx.cprintk ("scsi%d : sxfer=0x%x, scntl3=0x%x\n",
printk2748drivers/scsi/53c7,8xx.cprintk("scsi%d : reselected_check_next (DSA = 0x%lx (virt 0x%p))\n",
printk2751drivers/scsi/53c7,8xx.cprintk("scsi%d : resume address is 0x%x (virt 0x%p)\n",
printk2755drivers/scsi/53c7,8xx.cprintk("scsi%d : template code :\n", host->host_no);
printk2776drivers/scsi/53c7,8xx.cprintk("scsi%d : dsa_schedule (old DSA = 0x%lx (virt 0x%p))\n", 
printk2779drivers/scsi/53c7,8xx.cprintk("scsi%d : resume address is 0x%x (virt 0x%p)\n"
printk2791drivers/scsi/53c7,8xx.cprintk("scsi%d : new I/O 0x%x (virt 0x%p) scheduled\n", 
printk2800drivers/scsi/53c7,8xx.cprintk("scsi%d : idle\n", host->host_no);
printk2807drivers/scsi/53c7,8xx.cprintk("scsi%d : command sent\n");
printk2814drivers/scsi/53c7,8xx.cprintk("scsi%d : DSA loaded with 0x%x (virt 0x%p)\n", host->host_no,
printk2824drivers/scsi/53c7,8xx.cprintk("scsi%d : reselected by target %d lun %d\n",
printk2835drivers/scsi/53c7,8xx.cprintk("scsi%d : target %d lun %d disconnecting\n", 
printk2838drivers/scsi/53c7,8xx.cprintk("scsi%d : unknown target disconnecting\n",
printk2847drivers/scsi/53c7,8xx.cprintk ("scsi%d : disconnected, new queues are\n", 
printk2851drivers/scsi/53c7,8xx.cprintk ("scsi%d : sxfer=0x%x, scntl3=0x%x\n",
printk2872drivers/scsi/53c7,8xx.cprintk ("scsi%d : saved data pointer 0x%x (virt 0x%p)\n",
printk2885drivers/scsi/53c7,8xx.cprintk ("scsi%d : restored data pointer 0x%x (virt 0x%p)\n",
printk2895drivers/scsi/53c7,8xx.cprintk ("scsi%d : datapath residual %d\n",
printk2910drivers/scsi/53c7,8xx.cprintk ("scsi%d :  sync sanity check failed sxfer=0x%x, scntl3=0x%x",
printk2916drivers/scsi/53c7,8xx.cprintk ("scsi%d : unknown command sxfer=0x%x, scntl3=0x%x\n",
printk2926drivers/scsi/53c7,8xx.cprintk ("scsi%d : In do_datain (%s) sxfer=0x%x, scntl3=0x%x\n"
printk2951drivers/scsi/53c7,8xx.cprintk ("scsi%d : SDID target %d != DSA target %d at %s\n",
printk2962drivers/scsi/53c7,8xx.cprintk ("scsi%d : misc debug interrupt 0x%x\n",
printk2999drivers/scsi/53c7,8xx.cprintk ("scsi%d : unknown user interrupt 0x%x\n", 
printk3151drivers/scsi/53c7,8xx.cprintk ("scsi%d : kmalloc(%d) of breakpoint structure failed, try again\n",
printk3406drivers/scsi/53c7,8xx.cprintk ("scsi%d : num_cmds = %d, can_queue = %d\n"
printk3431drivers/scsi/53c7,8xx.cprintk ("scsi%d : kmalloc(%d) failed\n",
printk3457drivers/scsi/53c7,8xx.cprintk ("scsi%d : can't allocate command for target %d lun %d\n",
printk3521drivers/scsi/53c7,8xx.cprintk("scsi%d : command is ", host->host_no);
printk3525drivers/scsi/53c7,8xx.cprintk ("scsi%d : %d scatter/gather segments\n", host->host_no,
printk3635drivers/scsi/53c7,8xx.cprintk ("scsi%d :  sanity check failed select_indirect=0x%x\n",
printk3869drivers/scsi/53c7,8xx.cprintk("scsi%d : disabled or bad target %d lun %d\n", host->host_no,
printk3874drivers/scsi/53c7,8xx.cprintk("scsi%d : maximum commands exceeded\n", host->host_no);
printk3881drivers/scsi/53c7,8xx.cprintk("scsi%d : WRITE attempted with NO_WRITE debugging flag set\n",
printk3945drivers/scsi/53c7,8xx.cprintk("scsi%d : new dsa is 0x%lx (virt 0x%p)\n", host->host_no, 
printk3958drivers/scsi/53c7,8xx.cprintk("scsi%d : driver disabled\n", host->host_no);
printk3987drivers/scsi/53c7,8xx.cprintk ("scsi%d: no free slot\n", host->host_no);
printk4102drivers/scsi/53c7,8xx.cprintk ("scsi%d : moving command for target %d lun %d to start list\n",
printk4112drivers/scsi/53c7,8xx.cprintk ("scsi%d : danger Will Robinson!\n",
printk4165drivers/scsi/53c7,8xx.cprintk ("scsi%d : SIST0 0x%0x, SIST1 0x%0x\n", host->host_no,
printk4173drivers/scsi/53c7,8xx.cprintk ("scsi%d : Selection Timeout\n", host->host_no);
printk4175drivers/scsi/53c7,8xx.cprintk("scsi%d : target %d, lun %d, command ",
printk4178drivers/scsi/53c7,8xx.cprintk("scsi%d : dsp = 0x%x (virt 0x%p)\n", host->host_no,
printk4182drivers/scsi/53c7,8xx.cprintk("scsi%d : no command\n", host->host_no);
printk4213drivers/scsi/53c7,8xx.cprintk("scsi%d : target %d lun %d unexpected disconnect\n",
printk4218drivers/scsi/53c7,8xx.cprintk("scsi%d : unexpected disconnect (no command)\n",
printk4229drivers/scsi/53c7,8xx.cprintk("scsi%d : target %d lun %d parity error.\n",
printk4233drivers/scsi/53c7,8xx.cprintk("scsi%d : parity error\n", host->host_no);
printk4245drivers/scsi/53c7,8xx.cprintk("scsi%d : gross error\n", host->host_no);
printk4276drivers/scsi/53c7,8xx.cprintk ("scsi%d : SSTAT0_MA\n", host->host_no);
printk4282drivers/scsi/53c7,8xx.cprintk ("scsi%d : Oh no Mr. Bill!\n", host->host_no);
printk4298drivers/scsi/53c7,8xx.cprintk ("scsi%d : DMA FIFO not empty\n", host->host_no);
printk4300drivers/scsi/53c7,8xx.cprintk ("scsi%d: Flushing DMA FIFO\n", 
printk4392drivers/scsi/53c7,8xx.cprintk ("scsi%d : INTFLY\n", host->host_no); 
printk4413drivers/scsi/53c7,8xx.cprintk("scsi%d : very weird.\n", host->host_no);
printk4418drivers/scsi/53c7,8xx.cprintk("scsi%d : weird.  NCR53c7x0_cmd has no Scsi_Cmnd\n",
printk4423drivers/scsi/53c7,8xx.cprintk ("scsi%d : looking at result of 0x%x\n",
printk4444drivers/scsi/53c7,8xx.cprintk ("scsi%d : command complete : pid %lu, id %d,lun %d result 0x%x ", 
printk4486drivers/scsi/53c7,8xx.cprintk ("scsi%d : WARNING : INTFLY with no completed commands.\n",
printk4501drivers/scsi/53c7,8xx.cprintk ("scsi%d : SCSI FIFO not empty\n", 
printk4526drivers/scsi/53c7,8xx.cprintk("scsi%d : interrupt for pid %lu, id %d, lun %d ", 
printk4531drivers/scsi/53c7,8xx.cprintk("scsi%d : no active command\n", host->host_no);
printk4537drivers/scsi/53c7,8xx.cprintk ("scsi%d : ISTAT_SIP\n", host->host_no);
printk4543drivers/scsi/53c7,8xx.cprintk ("scsi%d : ISTAT_DIP\n", host->host_no);
printk4554drivers/scsi/53c7,8xx.cprintk ("scsi%d : DMA FIFO not empty\n", host->host_no);
printk4556drivers/scsi/53c7,8xx.cprintk ("scsi%d: Flushing DMA FIFO\n", 
printk4577drivers/scsi/53c7,8xx.cprintk("scsi%d : too many interrupts, halting", host->host_no);
printk4589drivers/scsi/53c7,8xx.cprintk("scsi%d : new dsp is 0x%lx (virt 0x%p)\n",
printk4634drivers/scsi/53c7,8xx.cprintk ("scsi%d : DANGER : abort_connected() called \n",
printk4859drivers/scsi/53c7,8xx.cprintk ("scsi%d : handling residual transfer (+ %d bytes from DMA FIFO)\n", 
printk4919drivers/scsi/53c7,8xx.cprintk ("scsi%d : target %d ignored SDTR and went into COMMAND OUT\n", 
printk4963drivers/scsi/53c7,8xx.cprintk ("scsi%d: Flushing DMA FIFO\n", 
printk4978drivers/scsi/53c7,8xx.cprintk("scsi%d : %s : unexpected phase %s.\n",
printk4992drivers/scsi/53c7,8xx.cprintk("scsi%d: new dsp 0x%p\n", host->host_no, hostdata->dsp);
printk5065drivers/scsi/53c7,8xx.cprintk ("scsi%d : couldn't read status register : %s\n",
printk5075drivers/scsi/53c7,8xx.cprintk(KERN_ALERT "scsi%d : BUS FAULT reason = %s\n",
printk5094drivers/scsi/53c7,8xx.cprintk(KERN_ALERT "          mail drew@PoohSticks.ORG\n");
printk5132drivers/scsi/53c7,8xx.cprintk("scsi%d : DSTAT=0x%x\n", host->host_no, (int) dstat);
printk5159drivers/scsi/53c7,8xx.cprintk(KERN_ALERT "scsi%d : unexpected abort interrupt at\n" 
printk5183drivers/scsi/53c7,8xx.cprintk(KERN_ALERT "scsi%d : unexpected single step interrupt at\n"
printk5186drivers/scsi/53c7,8xx.cprintk(KERN_ALERT "         mail drew@colorado.edu\n");
printk5218drivers/scsi/53c7,8xx.cprintk ("scsi%d : ignoring DSTAT_IID for SSTAT_STO\n",
printk5250drivers/scsi/53c7,8xx.cprintk("scsi%d: REQ before WAIT DISCONNECT IID\n", 
printk5255drivers/scsi/53c7,8xx.cprintk(KERN_ALERT "scsi%d : illegal instruction\n", host->host_no);
printk5257drivers/scsi/53c7,8xx.cprintk(KERN_ALERT "         mail drew@PoohSticks.ORG with ALL\n"
printk5282drivers/scsi/53c7,8xx.cprintk ("scsi%d : DSTAT_SIR\n", host->host_no);
printk5291drivers/scsi/53c7,8xx.cprintk(KERN_ALERT "scsi%d : failure at ", host->host_no);
printk5293drivers/scsi/53c7,8xx.cprintk(KERN_ALERT "          dstat_sir_intr() returned SPECIFIC_INT_PANIC\n");
printk5300drivers/scsi/53c7,8xx.cprintk(KERN_ALERT "scsi%d : failure at ", host->host_no);
printk5302drivers/scsi/53c7,8xx.cprintk(KERN_ALERT"          dstat_sir_intr() returned unknown value %d\n", 
printk5309drivers/scsi/53c7,8xx.cprintk(KERN_ALERT "scsi%d : Master Data Parity Error\n",
printk5386drivers/scsi/53c7,8xx.cprintk ("%s", buf);
printk5445drivers/scsi/53c7,8xx.cprintk ("Bogus SCSI command pid %ld; no host structure\n",
printk5449drivers/scsi/53c7,8xx.cprintk ("Bogus SCSI host %d; no hostdata\n", host->host_no);
printk5470drivers/scsi/53c7,8xx.cprintk ("scsi%d : dropped interrupt for command %ld\n", host->host_no,
printk5510drivers/scsi/53c7,8xx.cprintk ("scsi%d : found command %ld in Linux issue queue\n", 
printk5535drivers/scsi/53c7,8xx.cprintk ("scsi%d : found finished command %ld in running list\n", 
printk5540drivers/scsi/53c7,8xx.cprintk ("scsi%d : DANGER : command running, can not abort.\n",
printk5561drivers/scsi/53c7,8xx.cprintk ("scsi%d : did this command ever run?\n", host->host_no);
printk5564drivers/scsi/53c7,8xx.cprintk ("scsi%d : probably lost INTFLY, normal completion\n", 
printk5645drivers/scsi/53c7,8xx.cprintk ("scsi%d: lost command %ld\n", host->host_no, cmd->pid);
printk5716drivers/scsi/53c7,8xx.cprintk("scsi%d: comparing 0x%p to 0x%p\n", 
printk5772drivers/scsi/53c7,8xx.cprintk ("scsi%d : %s data pointer at offset %d\n",
printk5776drivers/scsi/53c7,8xx.cprintk ("scsi%d : can't determine %s data pointer offset\n",
printk5800drivers/scsi/53c7,8xx.cprintk("scsi%d : bad dsa virt 0x%p\n", host->host_no, dsa);
printk5803drivers/scsi/53c7,8xx.cprintk("%sscsi%d : dsa at phys 0x%lx (virt 0x%p)\n"
printk5815drivers/scsi/53c7,8xx.cprintk("               ");
printk5817drivers/scsi/53c7,8xx.cprintk("\n");
printk5822drivers/scsi/53c7,8xx.cprintk("        + %d : select_indirect = 0x%x\n",
printk5825drivers/scsi/53c7,8xx.cprintk("        + %d : dsa_cmnd = 0x%x ", hostdata->dsa_cmnd,
printk5828drivers/scsi/53c7,8xx.cprintk("               result = 0x%x, target = %d, lun = %d, cmd = ",
printk5832drivers/scsi/53c7,8xx.cprintk("\n");
printk5833drivers/scsi/53c7,8xx.cprintk("        + %d : dsa_next = 0x%x\n", hostdata->dsa_next,
printk5836drivers/scsi/53c7,8xx.cprintk("scsi%d target %d : sxfer_sanity = 0x%x, scntl3_sanity = 0x%x\n"
printk5842drivers/scsi/53c7,8xx.cprintk ("0x%x ", hostdata->sync[cmd->target].script[i]);
printk5843drivers/scsi/53c7,8xx.cprintk ("\n");
printk5866drivers/scsi/53c7,8xx.cprintk ("scsi%d : issue queue\n", host->host_no);
printk5877drivers/scsi/53c7,8xx.cprintk ("scsi%d: scsi pid %ld bad pointer to NCR53c7x0_cmd\n",
printk5884drivers/scsi/53c7,8xx.cprintk ("scsi%d : scsi pid %ld for target %d lun %d has no NCR53c7x0_cmd\n",
printk5890drivers/scsi/53c7,8xx.cprintk ("scsi%d : loop detected in issue queue\n",
printk5902drivers/scsi/53c7,8xx.cprintk ("scsi%d : schedule dsa array :\n", host->host_no);
printk5910drivers/scsi/53c7,8xx.cprintk ("scsi%d : end schedule dsa array\n", host->host_no);
printk5912drivers/scsi/53c7,8xx.cprintk ("scsi%d : reconnect_dsa_head :\n", host->host_no);
printk5921drivers/scsi/53c7,8xx.cprintk ("scsi%d: bad DSA pointer 0x%p", host->host_no,
printk5932drivers/scsi/53c7,8xx.cprintk ("scsi%d : end reconnect_dsa_head\n", host->host_no);
printk5934drivers/scsi/53c7,8xx.cprintk("scsi%d: possible loop in ncr reconnect list\n",
printk5956drivers/scsi/53c7,8xx.cprintk ("scsi%d : DCMD|DBC=0x%x, DSA=0x%lx (virt 0x%p)\n"
printk5975drivers/scsi/53c7,8xx.cprintk ("scsi%d : DSP 0x%lx (virt 0x%p) ->\n", host->host_no, 
printk5980drivers/scsi/53c7,8xx.cprintk ("scsi%d : connected (SDID=0x%x, SSID=0x%x)\n",
printk6099drivers/scsi/53c7,8xx.cprintk ("scsi%d : loop detected in running list!\n", host->host_no);
printk6102drivers/scsi/53c7,8xx.cprintk ("The sti() implicit in a printk() prevents hangs\n");
printk6126drivers/scsi/53c7,8xx.cprintk ("scsi%d : loop detected in issue queue!\n", 
printk6168drivers/scsi/53c7,8xx.cprintk ("scsi%d : nuking commands\n", host->host_no);
printk6174drivers/scsi/53c7,8xx.cprintk ("scsi%d : done. \n", host->host_no);
printk6175drivers/scsi/53c7,8xx.cprintk (KERN_ALERT "scsi%d : disabled.  Unload and reload\n",
printk6228drivers/scsi/53c7,8xx.cprintk(KERN_ALERT "scsi%d : could not halt NCR chip\n", 
printk6305drivers/scsi/53c7,8xx.cprintk ("scsi%d : %s event %d at %ld secs %ld usecs target %d lun %d\n",
printk6310drivers/scsi/53c7,8xx.cprintk ("         event for dsa 0x%lx (virt 0x%p)\n", 
printk6313drivers/scsi/53c7,8xx.cprintk ("         event for pid %ld ", event.pid);
printk6374drivers/scsi/53c7,8xx.cprintk ("scsi%d : leaked %d NCR53c7x0_cmd structures\n",
printk1545drivers/scsi/53c7,8xx.hprintk("scsi%d : %s reference %d at 0x%x in %s is now 0x%x\n",\
printk1577drivers/scsi/53c7,8xx.hprintk("scsi : dsa %s symbol %s(%d) word %d now 0x%x\n",  \
printk147drivers/scsi/BusLogic.cprintk("scsi: ***** BusLogic SCSI Driver Version "
printk149drivers/scsi/BusLogic.cprintk("scsi: Copyright 1995 by Leonard N. Zubkoff "
printk272drivers/scsi/BusLogic.cprintk("scsi%d: UNABLE TO ALLOCATE CCB %d - DETACHING\n",
printk328drivers/scsi/BusLogic.cprintk("scsi%d: Failed to allocate an additional CCB\n",
printk332drivers/scsi/BusLogic.cprintk("scsi%d: Allocated an additional CCB\n", HostAdapter->HostNumber);
printk489drivers/scsi/BusLogic.cprintk("BusLogic_Command(%02X) Status = %02X: %2d ==> %2d:",
printk492drivers/scsi/BusLogic.cprintk(" %02X", ((unsigned char *) ReplyData)[i]);
printk493drivers/scsi/BusLogic.cprintk("\n");
printk512drivers/scsi/BusLogic.cprintk("While configuring BusLogic Host Adapter at I/O Address 0x%X:\n",
printk514drivers/scsi/BusLogic.cprintk("%s FAILED - DETACHING\n", ErrorMessage);
printk516drivers/scsi/BusLogic.cprintk("ADDITIONAL FAILURE INFO - %s\n", BusLogic_CommandFailureReason);
printk536drivers/scsi/BusLogic.cprintk("BusLogic_Probe(0x%X): Status 0x%02X\n",
printk555drivers/scsi/BusLogic.cprintk("BusLogic_Probe(0x%X): Geometry 0x%02X\n",
printk590drivers/scsi/BusLogic.cprintk("BusLogic_HardReset(0x%X): Diagnostic Active, Status 0x%02X\n",
printk602drivers/scsi/BusLogic.cprintk("BusLogic_HardReset(0x%X): Diagnostic Completed, Status 0x%02X\n",
printk618drivers/scsi/BusLogic.cprintk("BusLogic_HardReset(0x%X): Host Adapter Ready, Status 0x%02X\n",
printk631drivers/scsi/BusLogic.cprintk("HOST ADAPTER STATUS REGISTER = %02X\n", StatusRegister);
printk635drivers/scsi/BusLogic.cprintk("HOST ADAPTER ERROR CODE = %d\n", ErrorCode);
printk676drivers/scsi/BusLogic.cprintk("BusLogic_Check(0x%X): Result %d\n",
printk984drivers/scsi/BusLogic.cprintk("scsi%d: Configuring BusLogic Model %s %s%s%s SCSI Host Adapter\n",
printk989drivers/scsi/BusLogic.cprintk("scsi%d:   Firmware Version: %s, I/O Address: 0x%X, "
printk994drivers/scsi/BusLogic.cprintk("scsi%d:   DMA Channel: ", HostAdapter->HostNumber);
printk996drivers/scsi/BusLogic.cprintk("%d, ", HostAdapter->DMA_Channel);
printk997drivers/scsi/BusLogic.celse printk("None, ");
printk999drivers/scsi/BusLogic.cprintk("BIOS Address: 0x%lX, ", HostAdapter->BIOS_Address);
printk1000drivers/scsi/BusLogic.celse printk("BIOS Address: None, ");
printk1001drivers/scsi/BusLogic.cprintk("Host Adapter SCSI ID: %d\n", HostAdapter->SCSI_ID);
printk1002drivers/scsi/BusLogic.cprintk("scsi%d:   Scatter/Gather Limit: %d segments, "
printk1006drivers/scsi/BusLogic.cprintk("scsi%d:   SCSI Parity Checking: %s, "
printk1012drivers/scsi/BusLogic.cprintk("scsi%d:   Disconnect/Reconnect: ", HostAdapter->HostNumber);
printk1014drivers/scsi/BusLogic.cprintk("Disabled");
printk1016drivers/scsi/BusLogic.cprintk("Enabled");
printk1019drivers/scsi/BusLogic.cprintk("%c", (DisconnectPermitted & (1 << TargetID)) ? 'Y' : 'N');
printk1020drivers/scsi/BusLogic.cprintk(", Tagged Queuing: ");
printk1024drivers/scsi/BusLogic.cprintk("Disabled");
printk1026drivers/scsi/BusLogic.cprintk("Enabled");
printk1029drivers/scsi/BusLogic.cprintk("%c", (TaggedQueuingPermitted & (1 << TargetID)) ? 'Y' : 'N');
printk1030drivers/scsi/BusLogic.cprintk("\n");
printk1039drivers/scsi/BusLogic.cprintk("scsi%d:   Error Recovery: ", HostAdapter->HostNumber);
printk1041drivers/scsi/BusLogic.cprintk("%s", BusLogic_ErrorRecoveryOptions[
printk1045drivers/scsi/BusLogic.cprintk("%s", BusLogic_ErrorRecoveryOptions2[
printk1047drivers/scsi/BusLogic.cprintk(", Mailboxes: %d, Initial CCBs: %d\n",
printk1049drivers/scsi/BusLogic.cprintk("scsi%d:   Driver Scatter/Gather Limit: %d segments, "
printk1081drivers/scsi/BusLogic.cprintk("scsi%d: UNABLE TO ACQUIRE IRQ CHANNEL %d - DETACHING\n",
printk1114drivers/scsi/BusLogic.cprintk("scsi%d: UNABLE TO ACQUIRE DMA CHANNEL %d - DETACHING\n",
printk1203drivers/scsi/BusLogic.cprintk("scsi%d: HOST ADAPTER INTERRUPT TEST FAILED - DETACHING\n",
printk1205drivers/scsi/BusLogic.cprintk("scsi%d:  Interrupts are not getting through "
printk1207drivers/scsi/BusLogic.cprintk("scsi%d:  BusLogic Driver Interrupt Handler.  "
printk1209drivers/scsi/BusLogic.cprintk("scsi%d:  either the Host Adapter or Motherboard "
printk1211drivers/scsi/BusLogic.cprintk("scsi%d:  Please check the Host Adapter configuration "
printk1213drivers/scsi/BusLogic.cprintk("scsi%d:  examining any dip switch and jumper settings "
printk1215drivers/scsi/BusLogic.cprintk("scsi%d:  verify that no other device is attempting to "
printk1217drivers/scsi/BusLogic.cprintk("scsi%d:  For PCI Host Adapters, it may also be necessary "
printk1219drivers/scsi/BusLogic.cprintk("scsi%d:  manually set the PCI interrupt assignments "
printk1221drivers/scsi/BusLogic.cprintk("scsi%d:  type selection in the BIOS Setup Program or "
printk1280drivers/scsi/BusLogic.cprintk("scsi%d: MAILBOX INITIALIZATION FAILED - DETACHING\n",
printk1306drivers/scsi/BusLogic.cprintk("scsi%d: ENABLE WIDE MODE CCB FAILED - DETACHING\n",
printk1329drivers/scsi/BusLogic.cprintk("scsi%d: MODIFY I/O ADDRESS FAILED - DETACHING\n",
printk1338drivers/scsi/BusLogic.cprintk("scsi%d: *** %s Initialized Successfully ***\n",
printk1432drivers/scsi/BusLogic.cprintk("scsi%d:   Target %d: Synchronous at "
printk1444drivers/scsi/BusLogic.cprintk("scsi%d:   Target %d: Synchronous at "
printk1451drivers/scsi/BusLogic.celse printk("scsi%d:   Target %d: Asynchronous\n",
printk1456drivers/scsi/BusLogic.cprintk("scsi%d:   No Target Devices Found\n", HostAdapter->HostNumber);
printk1649drivers/scsi/BusLogic.cprintk("BusLogic: BusLogic Driver Protocol Error 0x%02X\n",
printk1673drivers/scsi/BusLogic.cprintk("BusLogic: unknown Host Adapter Status 0x%02X\n",
printk1776drivers/scsi/BusLogic.celse printk("scsi%d: Aborted CCB #%d Not Found\n",
printk1828drivers/scsi/BusLogic.cprintk("scsi%d: Bus Device Reset CCB #%d to Target %d Completed\n",
printk1841drivers/scsi/BusLogic.cprintk("scsi%d: CCB #%d Impossible State\n",
printk1849drivers/scsi/BusLogic.cprintk("scsi%d: CCB #%d Aborted\n",
printk1861drivers/scsi/BusLogic.cprintk("scsi%d: CCB #%d Target %d: Result %X "
printk1866drivers/scsi/BusLogic.cprintk("scsi%d: CDB   ", HostAdapter->HostNumber);
printk1868drivers/scsi/BusLogic.cprintk(" %02X", CCB->CDB[i]);
printk1869drivers/scsi/BusLogic.cprintk("\n");
printk1870drivers/scsi/BusLogic.cprintk("scsi%d: Sense ", HostAdapter->HostNumber);
printk1872drivers/scsi/BusLogic.cprintk(" %02X", (*CCB->SenseDataPointer)[i]);
printk1873drivers/scsi/BusLogic.cprintk("\n");
printk2027drivers/scsi/BusLogic.cprintk("scsi%d: Tagged Queuing now active for Target %d\n",
printk2051drivers/scsi/BusLogic.cprintk("scsi%d: cannot write Outgoing Mailbox Entry\n",
printk2082drivers/scsi/BusLogic.cprintk("scsi%d: Recovering Lost Interrupt for IRQ Channel %d\n",
printk2118drivers/scsi/BusLogic.cprintk("scsi%d: Aborting CCB #%d\n",
printk2142drivers/scsi/BusLogic.cprintk("scsi%d: Resetting %s due to SCSI Reset State Interrupt\n",
printk2144drivers/scsi/BusLogic.celse printk("scsi%d: Resetting %s due to Target %d\n",
printk2153drivers/scsi/BusLogic.cprintk("scsi%d: Resetting %s Failed\n",
printk2205drivers/scsi/BusLogic.cprintk("scsi%d: Sending Bus Device Reset CCB #%d to Target %d\n",
printk2234drivers/scsi/BusLogic.cprintk("scsi%d: cannot write Outgoing Mailbox Entry for "
printk2271drivers/scsi/BusLogic.cprintk("scsi%d: Error Recovery Suppressed\n", HostAdapter->HostNumber);
printk2437drivers/scsi/BusLogic.cprintk("BusLogic: Unexpected Command Line Integers ignored\n");
printk2446drivers/scsi/BusLogic.cprintk("BusLogic: Invalid Command Line Entry "
printk2453drivers/scsi/BusLogic.cprintk("BusLogic: Invalid Command Line Entry "
printk2468drivers/scsi/BusLogic.cprintk("BusLogic: Invalid Command Line Entry "
printk2481drivers/scsi/BusLogic.cprintk("BusLogic: Invalid Command Line Entry "
printk2576drivers/scsi/BusLogic.cprintk("BusLogic: Unexpected Command Line String '%s' ignored\n", Strings);
printk359drivers/scsi/NCR5380.cprintk(" %s", signals[i].name);
printk362drivers/scsi/NCR5380.cprintk(" %s", basrs[i].name);
printk365drivers/scsi/NCR5380.cprintk(" %s", icrs[i].name);
printk368drivers/scsi/NCR5380.cprintk(" %s", mrs[i].name);
printk369drivers/scsi/NCR5380.cprintk("\n");
printk396drivers/scsi/NCR5380.cprintk("scsi%d : REQ not asserted, phase unknown.\n", 
printk401drivers/scsi/NCR5380.cprintk("scsi%d : phase %s\n", instance->host_no, phases[i].name);
printk577drivers/scsi/NCR5380.cprintk("scsi : NCR5380_all_init()\n");
printk663drivers/scsi/NCR5380.cprintk(" generic options"
printk693drivers/scsi/NCR5380.cprintk(" USLEEP, USLEEP_POLL=%d USLEEP_SLEEP=%d", USLEEP_POLL, USLEEP_SLEEP);
printk695drivers/scsi/NCR5380.cprintk(" generic release=%d", NCR5380_PUBLIC_RELEASE);
printk698drivers/scsi/NCR5380.cprintk(" ncr53c400 release=%d", NCR53C400_PUBLIC_RELEASE);
printk718drivers/scsi/NCR5380.cprintk("NCR5380 : coroutine is%s running.\n",
printk728drivers/scsi/NCR5380.cprintk ("scsi%d: no currently connected command\n",
printk734drivers/scsi/NCR5380.cprintk ("scsi%d: issue_queue\n", instance->host_no);
printk740drivers/scsi/NCR5380.cprintk ("scsi%d: disconnected_queue\n", instance->host_no);
printk810drivers/scsi/NCR5380.cprintk("scsi%d : WARNING : support for multiple outstanding commands enabled\n"
printk857drivers/scsi/NCR5380.cprintk("scsi%d : WRITE attempted with NO_WRITE debugging flag set\n",
printk894drivers/scsi/NCR5380.cprintk("scsi%d : command added to %s of queue\n", instance->host_no,
printk942drivers/scsi/NCR5380.cprintk("scsi%d : not connected\n", instance->host_no);
printk970drivers/scsi/NCR5380.cprintk("scsi%d : main() : command for target %d lun %d removed from issue_queue\n",
printk991drivers/scsi/NCR5380.cprintk("scsi%d : main(): select() failed, returned to issue_queue\n",
printk1008drivers/scsi/NCR5380.cprintk("scsi%d : main() : performing information transfer\n",
printk1013drivers/scsi/NCR5380.cprintk("scsi%d : main() : done set false\n", instance->host_no);
printk1040drivers/scsi/NCR5380.cprintk("scsi : NCR5380 irq %d triggered\n", irq);
printk1061drivers/scsi/NCR5380.cprintk("scsi%d : SEL interrupt\n", instance->host_no);
printk1067drivers/scsi/NCR5380.cprintk("scsi%d : PARITY interrupt\n", instance->host_no);
printk1072drivers/scsi/NCR5380.cprintk("scsi%d : RESET interrupt\n", instance->host_no);
printk1111drivers/scsi/NCR5380.cprintk("scsi: timeout at %d\n", __LINE__);
printk1122drivers/scsi/NCR5380.cprintk("scsi : unknown interrupt, BASR 0x%X, MR 0x%X, SR 0x%x\n", basr, NCR5380_read(MODE_REG), NCR5380_read(STATUS_REG));
printk1179drivers/scsi/NCR5380.cprintk("scsi%d : starting arbitration, id = %d\n", instance->host_no,
printk1211drivers/scsi/NCR5380.cprintk("scsi: arbitration timeout at %d\n", __LINE__);
printk1222drivers/scsi/NCR5380.cprintk("scsi%d : arbitration complete\n", instance->host_no);
printk1242drivers/scsi/NCR5380.cprintk("scsi%d : lost arbitration, deasserting MR_ARBITRATE\n", 
printk1256drivers/scsi/NCR5380.cprintk("scsi%d : lost arbitration, deasserting ICR_ASSERT_SEL\n", 
printk1270drivers/scsi/NCR5380.cprintk("scsi%d : won arbitration\n", instance->host_no);
printk1318drivers/scsi/NCR5380.cprintk("scsi%d : selecting target %d\n", instance->host_no, cmd->target);
printk1341drivers/scsi/NCR5380.cprintk ("scsi%d : reselection after won arbitration?\n",
printk1352drivers/scsi/NCR5380.cprintk("scsi%d : weirdness\n", instance->host_no);
printk1354drivers/scsi/NCR5380.cprintk("\trestart select\n");
printk1365drivers/scsi/NCR5380.cprintk("scsi%d : target did not respond within 250ms\n", 
printk1393drivers/scsi/NCR5380.cprintk("scsi%d : target %d selected, going into MESSAGE OUT phase.\n",
printk1425drivers/scsi/NCR5380.cprintk("scsi%d : nexus established.\n", instance->host_no);
printk1489drivers/scsi/NCR5380.cprintk("scsi%d : REQ detected\n", instance->host_no);
printk1495drivers/scsi/NCR5380.cprintk("scsi%d : phase mismatch\n", instance->host_no);
printk1544drivers/scsi/NCR5380.cprintk("scsi%d : req false, handshake complete\n", instance->host_no);
printk1567drivers/scsi/NCR5380.cprintk("scsi%d : residual %d\n", instance->host_no, c);
printk1634drivers/scsi/NCR5380.cprintk("scsi%d : initializing DMA channel %d for %s, %d bytes %s %0x\n",
printk1663drivers/scsi/NCR5380.cprintk("scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG));
printk1756drivers/scsi/NCR5380.cprintk("scsi%d : polled DMA transfer complete, basr 0x%X, sr 0x%X\n",
printk1773drivers/scsi/NCR5380.cprintk("Got an input overrun, using saved byte\n");
printk1780drivers/scsi/NCR5380.cprintk("No overrun??\n");
printk1784drivers/scsi/NCR5380.cprintk("Doing %d-byte PIO to 0x%X\n", cnt, *data);
printk1792drivers/scsi/NCR5380.cprintk("Return with data ptr = 0x%X, count %d, last 0x%X, next 0x%X\n",
printk1856drivers/scsi/NCR5380.cprintk("scsi%d : timed out on last byte\n",
printk1866drivers/scsi/NCR5380.cprintk("scsi%d : last bit sent works\n", 
printk1953drivers/scsi/NCR5380.cprintk("scsi%d : NDEBUG_NO_DATAOUT set, attempted DATAOUT aborted\n",
printk1971drivers/scsi/NCR5380.cprintk("scsi%d : %d bytes and %d buffers left\n",
printk2010drivers/scsi/NCR5380.cprintk("scsi%d : switching target %d lun %d to slow handshake\n",
printk2050drivers/scsi/NCR5380.cprintk("scsi%d : target %d lun %d linked command complete.\n",
printk2060drivers/scsi/NCR5380.cprintk("scsi%d : target %d lun %d linked command complete, no next_link\n"
printk2074drivers/scsi/NCR5380.cprintk("scsi%d : target %d lun %d linked request done, calling scsi_done().\n",
printk2087drivers/scsi/NCR5380.cprintk("scsi%d : command for target %d, lun %d completed\n",
printk2117drivers/scsi/NCR5380.cprintk("scsi%d : performing request sense\n", 
printk2138drivers/scsi/NCR5380.cprintk("scsi%d : REQUEST SENSE added to head of issue queue\n");
printk2178drivers/scsi/NCR5380.cprintk("scsi%d : command for target %d lun %d was moved from connected to"
printk2227drivers/scsi/NCR5380.cprintk("scsi%d : receiving extended message\n",
printk2237drivers/scsi/NCR5380.cprintk("scsi%d : length=%d, code=0x%02x\n", 
printk2253drivers/scsi/NCR5380.cprintk("scsi%d : message received, residual %d\n",
printk2265drivers/scsi/NCR5380.cprintk("scsi%d: error receiving extended message\n",
printk2269drivers/scsi/NCR5380.cprintk("scsi%d: extended message code %02x length %d is too long\n",
printk2281drivers/scsi/NCR5380.cprintk("scsi%d: rejecting message ", instance->host_no);
printk2283drivers/scsi/NCR5380.cprintk("\n");
printk2285drivers/scsi/NCR5380.cprintk("scsi%d: rejecting unknown message %02x from target %d, lun %d\n",
printk2288drivers/scsi/NCR5380.cprintk("scsi%d: rejecting unknown extended message code %02x, length %d from target %d, lun %d\n",
printk2326drivers/scsi/NCR5380.cprintk("scsi%d : issued command, sleeping until %ul\n", instance->host_no,
printk2341drivers/scsi/NCR5380.cprintk("scsi%d : unknown phase\n", instance->host_no);
printk2353drivers/scsi/NCR5380.cprintk("scsi%d : poll timed out, sleeping until %ul\n", instance->host_no,
printk2403drivers/scsi/NCR5380.cprintk("scsi%d : reselect\n", instance->host_no);
printk2433drivers/scsi/NCR5380.cprintk("scsi%d : expecting IDENTIFY message, got ",
printk2475drivers/scsi/NCR5380.cprintk("scsi%d : warning : target bitmask %02x lun %d tag %d not in disconnect_queue.\n",
printk2478drivers/scsi/NCR5380.cprintk("scsi%d : warning : target bitmask %02x lun %d not in disconnect_queue.\n",
printk2499drivers/scsi/NCR5380.cprintk"scsi%d : nexus established, target = %d, lun = %d, tag = %d\n",
printk2582drivers/scsi/NCR5380.cprintk("scsi%d : aborting command\n", instance->host_no);
printk2591drivers/scsi/NCR5380.cprintk("scsi%d : abort called\n", instance->host_no);
printk2592drivers/scsi/NCR5380.cprintk("        basr 0x%X, sr 0x%X\n", 
printk2605drivers/scsi/NCR5380.cprintk("scsi%d : aborting connected command\n", instance->host_no);
printk2643drivers/scsi/NCR5380.cprintk("scsi%d : abort removed command from issue queue.\n", 
printk2664drivers/scsi/NCR5380.cprintk("scsi%d : abort failed, command connected.\n", instance->host_no);
printk2699drivers/scsi/NCR5380.cprintk("scsi%d : aborting disconnected command.\n", instance->host_no);
printk2706drivers/scsi/NCR5380.cprintk("scsi%d : nexus reestablished.\n", instance->host_no);
printk2742drivers/scsi/NCR5380.cprintk("scsi%d : warning : SCSI command probably completed successfully\n"
printk293drivers/scsi/NCR53c406a.cVDEB(printk("dma: before count=%d   ", count));
printk306drivers/scsi/NCR53c406a.cVDEB(printk("after count=%d\n", count));
printk474drivers/scsi/NCR53c406a.cprintk("NCR53c406a: BIOS signature not found\n");
printk478drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a BIOS found at %X\n", (unsigned int) bios_base););
printk493drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a: port %x in use\n", ports[i]));
printk496drivers/scsi/NCR53c406a.cVDEB(printk("NCR53c406a: port %x available\n", ports[i]));
printk501drivers/scsi/NCR53c406a.cVDEB(printk("NCR53c406a: Sig register valid\n"));
printk502drivers/scsi/NCR53c406a.cVDEB(printk("port_base=%x\n", port_base));
printk511drivers/scsi/NCR53c406a.cprintk("NCR53c406a: no available ports found\n");
printk515drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a detected\n"));
printk524drivers/scsi/NCR53c406a.cprintk("NCR53c406a: IRQ problem, irq_level=%d, giving up\n", irq_level);
printk530drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a: using port_base %x\n", port_base));
printk535drivers/scsi/NCR53c406a.cprintk("NCR53c406a: unable to allocate IRQ %d\n", irq_level);
printk539drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a: allocated IRQ %d\n", irq_level));
printk543drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a: No interrupts detected\n"));
printk545drivers/scsi/NCR53c406a.cprintk("NCR53c406a: No interrupts found and DMA mode defined. Giving up.\n");
printk550drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a: Shouldn't get here!\n"));
printk557drivers/scsi/NCR53c406a.cprintk("NCR53c406a: unable to allocate DMA channel %d\n", dma_chan);
printk561drivers/scsi/NCR53c406a.cDEB(printk("Allocated DMA channel %d\n", dma_chan));
printk589drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a: Setup called\n"););
printk592drivers/scsi/NCR53c406a.cprintk("NCR53c406a: Setup called too many times.  Bad LILO params?\n");
printk596drivers/scsi/NCR53c406a.cprintk("NCR53c406a: Malformed command line\n");
printk597drivers/scsi/NCR53c406a.cprintk("NCR53c406a: Usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]\n");
printk603drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a: Specified port_base 0x%X\n", port_base);)
printk606drivers/scsi/NCR53c406a.cprintk("NCR53c406a: Invalid PORTBASE 0x%X specified\n", ints[1]);
printk613drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a: Specified irq %d\n", irq_level);)
printk619drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a: Specified irq %d\n", port_base);)
printk622drivers/scsi/NCR53c406a.cprintk("NCR53c406a: Invalid IRQ %d specified\n", ints[2]);
printk628drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a: port_base=0x%X, irq=%d, fast_pio=%d\n", port_base, irq_level, fast_pio);)
printk633drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a_info called\n"));
printk661drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a_command called\n"));
printk679drivers/scsi/NCR53c406a.cVDEB(printk("NCR53c406a_queue called\n"));
printk680drivers/scsi/NCR53c406a.cDEB(printk("cmd=%02x, cmd_len=%02x, target=%02x, lun=%02x, bufflen=%d\n", 
printk689drivers/scsi/NCR53c406a.cprintk("cmd[%d]=%02x  ", i, SCpnt->cmnd[i]));
printk690drivers/scsi/NCR53c406a.cVDEB(printk("\n"));
printk717drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a_abort called\n"));
printk723drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a_reset called\n"));
printk741drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a_biosparm called\n"));
printk767drivers/scsi/NCR53c406a.cVDEB(printk("NCR53c406a_intr called\n"));
printk783drivers/scsi/NCR53c406a.cprintk("status=%02x, seq_reg=%02x, int_reg=%02x, fifo_size=%02x", 
printk786drivers/scsi/NCR53c406a.cprintk("\n");
printk788drivers/scsi/NCR53c406a.cprintk(", pio=%02x\n", pio_status);
printk794drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a: reset intr received\n"));
printk803drivers/scsi/NCR53c406a.cprintk("NCR53C406A: Warning: PIO error!\n");
printk812drivers/scsi/NCR53c406a.cprintk("NCR53c406a: Warning: parity error!\n");
printk820drivers/scsi/NCR53c406a.cprintk("NCR53c406a: Warning: gross error!\n");
printk828drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a: disconnect intr received\n"));
printk848drivers/scsi/NCR53c406a.cVDEB(printk("NCR53c406a: Data-Out phase\n"));
printk877drivers/scsi/NCR53c406a.cVDEB(printk("NCR53c406a: Data-In phase\n"));
printk904drivers/scsi/NCR53c406a.cprintk("NCR53c406a: Warning: Unknown interupt occured in command phase!\n");
printk910drivers/scsi/NCR53c406a.cVDEB(printk("NCR53c406a: Status phase\n"));
printk913drivers/scsi/NCR53c406a.cprintk("request_buffer=");
printk915drivers/scsi/NCR53c406a.cprintk("%02x ", *((unsigned char*)current_SC->request_buffer + i));
printk916drivers/scsi/NCR53c406a.cprintk("\n");
printk918drivers/scsi/NCR53c406a.cprintk("dma residue = %d\n", NCR53c406a_dma_residual());
printk929drivers/scsi/NCR53c406a.cprintk("NCR53c406a: WARNING: Reserved phase!!!\n");
printk933drivers/scsi/NCR53c406a.cDEB(printk("NCR53c406a: Message-Out phase\n"));
printk941drivers/scsi/NCR53c406a.cVDEB(printk("NCR53c406a: Message-In phase\n"));
printk947drivers/scsi/NCR53c406a.cVDEB(printk("SCSI FIFO size=%d\n", inb(FIFO_FLAGS) & 0x1f));
printk948drivers/scsi/NCR53c406a.cDEB(printk("Status = %02x  Message = %02x\n", 
printk954drivers/scsi/NCR53c406a.cDEB(printk("Discarding SAVE_POINTERS message\n"));
printk534drivers/scsi/aha152x.cprintk("aha152x: RESET IN\n");
printk574drivers/scsi/aha152x.cprintk("aha152x: usage: aha152x=<IOBASE>[,<IRQ>[,<SCSI ID>"
printk579drivers/scsi/aha152x.cprintk("aha152x: usage: aha152x=<IOBASE>[,<IRQ>[,<SCSI ID>"
printk656drivers/scsi/aha152x.cprintk("aha152x: processing commandline: ");
printk661drivers/scsi/aha152x.cprintk("\naha152x: %s\n", setup[i].conf);
printk662drivers/scsi/aha152x.cprintk("aha152x: invalid line (controller=%d)\n", i+1);
printk665drivers/scsi/aha152x.cprintk("ok\n");
printk676drivers/scsi/aha152x.cprintk("\naha152x: SETUP0 (0x%x, %d, %d, %d, %d, %d, %d) invalid\n",
printk698drivers/scsi/aha152x.cprintk("\naha152x: SETUP1 (0x%x, %d, %d, %d, %d, %d, %d) invalid\n",
printk726drivers/scsi/aha152x.cprintk("aha152x: BIOS test: passed, ");
printk728drivers/scsi/aha152x.cprintk("aha152x: ");
printk753drivers/scsi/aha152x.cprintk("auto configuration: ok, ");
printk757drivers/scsi/aha152x.cprintk("detection complete\n");
printk796drivers/scsi/aha152x.cprintk("aha152x%d: bad IRQ %d.\n", i, setup[i].irq);
printk797drivers/scsi/aha152x.cprintk("         Contact author.\n");
printk801drivers/scsi/aha152x.cprintk("aha152x%d: IRQ %d already in use. Configure another.\n",
printk805drivers/scsi/aha152x.cprintk("\naha152x%d: Unexpected error code on"
printk807drivers/scsi/aha152x.cprintk("         Contact author.\n");
printk809drivers/scsi/aha152x.cprintk("aha152x: driver needs an IRQ.\n");
printk827drivers/scsi/aha152x.cprintk("aha152x%d: vital data: PORTBASE=0x%03x, IRQ=%d, SCSI ID=%d,"
printk863drivers/scsi/aha152x.cprintk("aha152x: queue(), ");
printk870drivers/scsi/aha152x.cprintk("SCpnt (target = %d lun = %d cmnd = ",
printk873drivers/scsi/aha152x.cprintk(", cmd_len=%d, pieces = %d size = %u), ",
printk918drivers/scsi/aha152x.cprintk("i+ (%d), ", HOSTDATA(shpnt)->commands);
printk942drivers/scsi/aha152x.cprintk("aha152x: interrupt driven driver; use aha152x_queue()\n");
printk962drivers/scsi/aha152x.cprintk("aha152x: abort(), SCpnt=0x%08x, ", (unsigned int) SCpnt);
printk995drivers/scsi/aha152x.cprintk("bus busy w/o current command, ");
printk1064drivers/scsi/aha152x.cprintk("command not found\n");
printk1123drivers/scsi/aha152x.cprintk("aha152x: reset(), bus not free: SCSI RESET OUT\n");
printk1168drivers/scsi/aha152x.cprintk("commands on targets w/ soft-resets:\n");
printk1197drivers/scsi/aha152x.cprintk("aha152x_biosparam: dev=%s, size=%d, ", kdevname(dev), size);
printk1209drivers/scsi/aha152x.cprintk("bios geometry: head=%d, sec=%d, cyl=%d\n",
printk1211drivers/scsi/aha152x.cprintk("WARNING: check, if the bios geometry is correct.\n");
printk1229drivers/scsi/aha152x.cprintk("\naha152x: done(), ");
printk1238drivers/scsi/aha152x.cprintk("done(%x), ", error);
printk1254drivers/scsi/aha152x.cprintk("ok (%d), ", HOSTDATA(shpnt)->commands);
printk1263drivers/scsi/aha152x.cprintk("BUS FREE loop, ");
printk1269drivers/scsi/aha152x.cprintk("BUS FREE\n");
printk1277drivers/scsi/aha152x.cprintk("calling scsi_done, ");
printk1282drivers/scsi/aha152x.cprintk("done returned, ");
printk1306drivers/scsi/aha152x.cprintk("\naha152x: intr(), ");
printk1333drivers/scsi/aha152x.cprintk("i+, ");
printk1349drivers/scsi/aha152x.cprintk("reselected, ");
printk1362drivers/scsi/aha152x.cprintk("SELID=%02x, target=%d, ", GETPORT(SELID), target);
printk1377drivers/scsi/aha152x.cprintk("target doesn't enter MSGI to identify (phase=%02x)\n", i);
printk1388drivers/scsi/aha152x.cprintk("target=%d, inbound message (%02x) != IDENTIFY\n",
printk1398drivers/scsi/aha152x.cprintk("identify=%02x, lun=%d, ", identify_msg, identify_msg & 0x3f);
printk1406drivers/scsi/aha152x.cprintk("d-, ");
printk1414drivers/scsi/aha152x.cprintk("lun=%d, ", identify_msg & 0x3f);
printk1440drivers/scsi/aha152x.cprintk("i-, ");
printk1447drivers/scsi/aha152x.cprintk("issuing command, ");
printk1453drivers/scsi/aha152x.cprintk("selecting %d, ", CURRENT_SC->target); 
printk1471drivers/scsi/aha152x.cprintk("aha152x: ignoring spurious interrupt, nothing to do\n");
printk1473drivers/scsi/aha152x.cprintk("aha152x: SWINT is set!  Why?\n");
printk1512drivers/scsi/aha152x.cprintk("aha152x: passing bus free condition\n");
printk1530drivers/scsi/aha152x.cprintk("SELDO (SELID=%x), ", GETPORT(SELID));
printk1538drivers/scsi/aha152x.cprintk("(ABORT) target selected, ");
printk1554drivers/scsi/aha152x.cprintk("outbound SDTR: ");
printk1579drivers/scsi/aha152x.cprintk("SELTO, ");
printk1598drivers/scsi/aha152x.cprintk("(ABORT) selection timeout, ");
printk1632drivers/scsi/aha152x.cprintk("MESSAGE OUT, ");
printk1639drivers/scsi/aha152x.cprintk("unexpected MSGO; rejecting, ");
printk1658drivers/scsi/aha152x.cprintk("messages (");
printk1659drivers/scsi/aha152x.cfor(i=0; i<MSGLEN; i+=print_msg(&MSG(i)), printk(" "))
printk1661drivers/scsi/aha152x.cprintk("), ");
printk1669drivers/scsi/aha152x.cprintk("%x ", MSG(i));
printk1717drivers/scsi/aha152x.cprintk("COMMAND, ");
printk1755drivers/scsi/aha152x.cprintk("MESSAGE IN, ");
printk1770drivers/scsi/aha152x.cprintk("target disconnected, ");
printk1781drivers/scsi/aha152x.cprintk("inbound message (COMMAND COMPLETE), ");
printk1791drivers/scsi/aha152x.cprintk("synchronous rejected, ");
printk1794drivers/scsi/aha152x.cprintk("inbound message (MESSAGE REJECT), ");
printk1797drivers/scsi/aha152x.cprintk("inbound message (MESSAGE REJECT), ");
printk1804drivers/scsi/aha152x.cprintk("inbound message (SAVE DATA POINTERS), ");
printk1815drivers/scsi/aha152x.cprintk("inbound message (EXTENDED MESSAGE), ");
printk1845drivers/scsi/aha152x.cprintk("inbound SDTR: "); print_msg(buffer);
printk1875drivers/scsi/aha152x.cprintk("outbound SDTR: ");
printk1906drivers/scsi/aha152x.cprintk("unsupported inbound message %x, ", 
printk1934drivers/scsi/aha152x.cprintk("d+, ");
printk1954drivers/scsi/aha152x.cprintk("STATUS, ");
printk1962drivers/scsi/aha152x.cprintk("aha152x: passing STATUS phase");
printk1971drivers/scsi/aha152x.cprintk("inbound status ");
printk1973drivers/scsi/aha152x.cprintk(", ");
printk1984drivers/scsi/aha152x.cprintk("DATA IN, ");
printk1989drivers/scsi/aha152x.cprintk("aha152x: P_DATAI: %d(%d) bytes left in FIFO, resetting\n",
printk2010drivers/scsi/aha152x.cprintk("expecting data, ");
printk2018drivers/scsi/aha152x.cprintk("ok, ");
printk2033drivers/scsi/aha152x.cprintk("last transfer, ");
printk2040drivers/scsi/aha152x.cprintk("fifodata=%d, ", fifodata);
printk2055drivers/scsi/aha152x.cprintk("data_count=%d, ", data_count);
printk2080drivers/scsi/aha152x.cprintk("data on last transfer (%d bytes) ",
printk2083drivers/scsi/aha152x.cprintk("data on last transfer (%d bytes: ",
printk2087drivers/scsi/aha152x.cprintk("%2x ", *data++);
printk2088drivers/scsi/aha152x.cprintk("), ");
printk2115drivers/scsi/aha152x.cprintk("aha152x: more data than expected (%d bytes)\n",
printk2118drivers/scsi/aha152x.cprintk("aha152x: data (");
printk2120drivers/scsi/aha152x.cprintk("%2x ", GETPORT(DATAPORT));
printk2121drivers/scsi/aha152x.cprintk(")\n");
printk2127drivers/scsi/aha152x.cprintk("fifo empty, ");
printk2129drivers/scsi/aha152x.cprintk("something left in fifo, ");
printk2137drivers/scsi/aha152x.cprintk("left buffers (buffers=%d, bytes=%d), ",
printk2149drivers/scsi/aha152x.cprintk("got %d bytes, ", GETSTCNT());
printk2162drivers/scsi/aha152x.cprintk("DATA OUT, ");
printk2166drivers/scsi/aha152x.cprintk("got data to send (bytes=%d, buffers=%d), ",
printk2173drivers/scsi/aha152x.cprintk("%d(%d) left in FIFO, ",
printk2195drivers/scsi/aha152x.cprintk("sending data (left: bytes=%d, buffers=%d), waiting, ",
printk2206drivers/scsi/aha152x.cprintk("data_count=%d, ", data_count);
printk2231drivers/scsi/aha152x.cprintk("fifo (%d bytes), transfered (%d bytes), ",
printk2263drivers/scsi/aha152x.cprintk("left data (bytes=%d, buffers=%d), fifos (bytes=%d), "
printk2277drivers/scsi/aha152x.cprintk("waiting for SCSI fifo to get empty, ");
printk2284drivers/scsi/aha152x.cprintk("ok, left data (bytes=%d, buffers=%d) ",
printk2299drivers/scsi/aha152x.cprintk("sent %d data bytes, ", GETSTCNT());
printk2310drivers/scsi/aha152x.cprintk("unexpected BUS FREE, ");
printk2322drivers/scsi/aha152x.cprintk("PARITY error in DATA phase, ");
printk2332drivers/scsi/aha152x.cprintk("aha152x: unexpected phase\n");
printk2340drivers/scsi/aha152x.cprintk("command done.\n");
printk2358drivers/scsi/aha152x.cprintk("done returned (DID_OK: Status=%x; Message=%x).\n",
printk2386drivers/scsi/aha152x.cprintk("\naha152x: %s\n", msg);
printk2404drivers/scsi/aha152x.cprintk("\n%s: ", CURRENT_SC ? "on bus" : "waiting");
printk2407drivers/scsi/aha152x.cprintk("SCSISEQ (");
printk2408drivers/scsi/aha152x.cif(s & TEMODEO)     printk("TARGET MODE ");
printk2409drivers/scsi/aha152x.cif(s & ENSELO)      printk("SELO ");
printk2410drivers/scsi/aha152x.cif(s & ENSELI)      printk("SELI ");
printk2411drivers/scsi/aha152x.cif(s & ENRESELI)    printk("RESELI ");
printk2412drivers/scsi/aha152x.cif(s & ENAUTOATNO)  printk("AUTOATNO ");
printk2413drivers/scsi/aha152x.cif(s & ENAUTOATNI)  printk("AUTOATNI ");
printk2414drivers/scsi/aha152x.cif(s & ENAUTOATNP)  printk("AUTOATNP ");
printk2415drivers/scsi/aha152x.cif(s & SCSIRSTO)    printk("SCSIRSTO ");
printk2416drivers/scsi/aha152x.cprintk(");");
printk2418drivers/scsi/aha152x.cprintk(" SCSISIG (");
printk2423drivers/scsi/aha152x.cprintk("DATA OUT");
printk2426drivers/scsi/aha152x.cprintk("DATA IN");
printk2429drivers/scsi/aha152x.cprintk("COMMAND"); 
printk2432drivers/scsi/aha152x.cprintk("STATUS"); 
printk2435drivers/scsi/aha152x.cprintk("MESSAGE OUT");
printk2438drivers/scsi/aha152x.cprintk("MESSAGE IN");
printk2441drivers/scsi/aha152x.cprintk("*illegal*");
printk2445drivers/scsi/aha152x.cprintk("); ");
printk2447drivers/scsi/aha152x.cprintk("INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo");
printk2449drivers/scsi/aha152x.cprintk("SSTAT (");
printk2451drivers/scsi/aha152x.cif(s & TARGET)   printk("TARGET ");
printk2452drivers/scsi/aha152x.cif(s & SELDO)    printk("SELDO ");
printk2453drivers/scsi/aha152x.cif(s & SELDI)    printk("SELDI ");
printk2454drivers/scsi/aha152x.cif(s & SELINGO)  printk("SELINGO ");
printk2455drivers/scsi/aha152x.cif(s & SWRAP)    printk("SWRAP ");
printk2456drivers/scsi/aha152x.cif(s & SDONE)    printk("SDONE ");
printk2457drivers/scsi/aha152x.cif(s & SPIORDY)  printk("SPIORDY ");
printk2458drivers/scsi/aha152x.cif(s & DMADONE)  printk("DMADONE ");
printk2461drivers/scsi/aha152x.cif(s & SELTO)     printk("SELTO ");
printk2462drivers/scsi/aha152x.cif(s & ATNTARG)   printk("ATNTARG ");
printk2463drivers/scsi/aha152x.cif(s & SCSIRSTI)  printk("SCSIRSTI ");
printk2464drivers/scsi/aha152x.cif(s & PHASEMIS)  printk("PHASEMIS ");
printk2465drivers/scsi/aha152x.cif(s & BUSFREE)   printk("BUSFREE ");
printk2466drivers/scsi/aha152x.cif(s & SCSIPERR)  printk("SCSIPERR ");
printk2467drivers/scsi/aha152x.cif(s & PHASECHG)  printk("PHASECHG ");
printk2468drivers/scsi/aha152x.cif(s & REQINIT)   printk("REQINIT ");
printk2469drivers/scsi/aha152x.cprintk("); ");
printk2472drivers/scsi/aha152x.cprintk("SSTAT (");
printk2476drivers/scsi/aha152x.cif(s & TARGET)    printk("TARGET ");
printk2477drivers/scsi/aha152x.cif(s & SELDO)     printk("SELDO ");
printk2478drivers/scsi/aha152x.cif(s & SELDI)     printk("SELDI ");
printk2479drivers/scsi/aha152x.cif(s & SELINGO)   printk("SELINGO ");
printk2480drivers/scsi/aha152x.cif(s & SWRAP)     printk("SWRAP ");
printk2481drivers/scsi/aha152x.cif(s & SDONE)     printk("SDONE ");
printk2482drivers/scsi/aha152x.cif(s & SPIORDY)   printk("SPIORDY ");
printk2483drivers/scsi/aha152x.cif(s & DMADONE)   printk("DMADONE ");
printk2487drivers/scsi/aha152x.cif(s & SELTO)     printk("SELTO ");
printk2488drivers/scsi/aha152x.cif(s & ATNTARG)   printk("ATNTARG ");
printk2489drivers/scsi/aha152x.cif(s & SCSIRSTI)  printk("SCSIRSTI ");
printk2490drivers/scsi/aha152x.cif(s & PHASEMIS)  printk("PHASEMIS ");
printk2491drivers/scsi/aha152x.cif(s & BUSFREE)   printk("BUSFREE ");
printk2492drivers/scsi/aha152x.cif(s & SCSIPERR)  printk("SCSIPERR ");
printk2493drivers/scsi/aha152x.cif(s & PHASECHG)  printk("PHASECHG ");
printk2494drivers/scsi/aha152x.cif(s & REQINIT)   printk("REQINIT ");
printk2495drivers/scsi/aha152x.cprintk("); ");
printk2497drivers/scsi/aha152x.cprintk("SXFRCTL0 (");
printk2500drivers/scsi/aha152x.cif(s & SCSIEN)    printk("SCSIEN ");
printk2501drivers/scsi/aha152x.cif(s & DMAEN)     printk("DMAEN ");
printk2502drivers/scsi/aha152x.cif(s & CH1)       printk("CH1 ");
printk2503drivers/scsi/aha152x.cif(s & CLRSTCNT)  printk("CLRSTCNT ");
printk2504drivers/scsi/aha152x.cif(s & SPIOEN)    printk("SPIOEN ");
printk2505drivers/scsi/aha152x.cif(s & CLRCH1)    printk("CLRCH1 ");
printk2506drivers/scsi/aha152x.cprintk("); ");
printk2508drivers/scsi/aha152x.cprintk("SIGNAL (");
printk2511drivers/scsi/aha152x.cif(s & ATNI)  printk("ATNI ");
printk2512drivers/scsi/aha152x.cif(s & SELI)  printk("SELI ");
printk2513drivers/scsi/aha152x.cif(s & BSYI)  printk("BSYI ");
printk2514drivers/scsi/aha152x.cif(s & REQI)  printk("REQI ");
printk2515drivers/scsi/aha152x.cif(s & ACKI)  printk("ACKI ");
printk2516drivers/scsi/aha152x.cprintk("); ");
printk2518drivers/scsi/aha152x.cprintk("SELID (%02x), ", GETPORT(SELID));
printk2520drivers/scsi/aha152x.cprintk("SSTAT2 (");
printk2523drivers/scsi/aha152x.cif(s & SOFFSET)  printk("SOFFSET ");
printk2524drivers/scsi/aha152x.cif(s & SEMPTY)   printk("SEMPTY ");
printk2525drivers/scsi/aha152x.cif(s & SFULL)    printk("SFULL ");
printk2526drivers/scsi/aha152x.cprintk("); SFCNT (%d); ", s & (SFULL|SFCNT));
printk2529drivers/scsi/aha152x.cprintk("SCSICNT (%d), OFFCNT(%d), ", (s&0xf0)>>4, s&0x0f);
printk2531drivers/scsi/aha152x.cprintk("SSTAT4 (");
printk2533drivers/scsi/aha152x.cif(s & SYNCERR)   printk("SYNCERR ");
printk2534drivers/scsi/aha152x.cif(s & FWERR)     printk("FWERR ");
printk2535drivers/scsi/aha152x.cif(s & FRERR)     printk("FRERR ");
printk2536drivers/scsi/aha152x.cprintk("); ");
printk2538drivers/scsi/aha152x.cprintk("DMACNTRL0 (");
printk2540drivers/scsi/aha152x.cprintk("%s ", s & _8BIT      ? "8BIT"  : "16BIT");
printk2541drivers/scsi/aha152x.cprintk("%s ", s & DMA        ? "DMA"   : "PIO"  );
printk2542drivers/scsi/aha152x.cprintk("%s ", s & WRITE_READ ? "WRITE" : "READ" );
printk2543drivers/scsi/aha152x.cif(s & ENDMA)    printk("ENDMA ");
printk2544drivers/scsi/aha152x.cif(s & INTEN)    printk("INTEN ");
printk2545drivers/scsi/aha152x.cif(s & RSTFIFO)  printk("RSTFIFO ");
printk2546drivers/scsi/aha152x.cif(s & SWINT)    printk("SWINT ");
printk2547drivers/scsi/aha152x.cprintk("); ");
printk2551drivers/scsi/aha152x.cprintk("DMACNTRL1 (");
printk2554drivers/scsi/aha152x.cif(s & PWRDWN)    printk("PWRDN ");
printk2555drivers/scsi/aha152x.cprintk("); ");
printk2558drivers/scsi/aha152x.cprintk("STK (%d); ", s & 0xf);
printk2562drivers/scsi/aha152x.cprintk("DMASTAT (");
printk2564drivers/scsi/aha152x.cif(s & ATDONE)     printk("ATDONE ");
printk2565drivers/scsi/aha152x.cif(s & WORDRDY)    printk("WORDRDY ");
printk2566drivers/scsi/aha152x.cif(s & DFIFOFULL)  printk("DFIFOFULL ");
printk2567drivers/scsi/aha152x.cif(s & DFIFOEMP)   printk("DFIFOEMP ");
printk2568drivers/scsi/aha152x.cprintk(")");
printk2570drivers/scsi/aha152x.cprintk("\n");
printk2581drivers/scsi/aha152x.cprintk("enabled interrupts (");
printk2584drivers/scsi/aha152x.cif(s & ENSELDO)    printk("ENSELDO ");
printk2585drivers/scsi/aha152x.cif(s & ENSELDI)    printk("ENSELDI ");
printk2586drivers/scsi/aha152x.cif(s & ENSELINGO)  printk("ENSELINGO ");
printk2587drivers/scsi/aha152x.cif(s & ENSWRAP)    printk("ENSWRAP ");
printk2588drivers/scsi/aha152x.cif(s & ENSDONE)    printk("ENSDONE ");
printk2589drivers/scsi/aha152x.cif(s & ENSPIORDY)  printk("ENSPIORDY ");
printk2590drivers/scsi/aha152x.cif(s & ENDMADONE)  printk("ENDMADONE ");
printk2593drivers/scsi/aha152x.cif(s & ENSELTIMO)    printk("ENSELTIMO ");
printk2594drivers/scsi/aha152x.cif(s & ENATNTARG)    printk("ENATNTARG ");
printk2595drivers/scsi/aha152x.cif(s & ENPHASEMIS)   printk("ENPHASEMIS ");
printk2596drivers/scsi/aha152x.cif(s & ENBUSFREE)    printk("ENBUSFREE ");
printk2597drivers/scsi/aha152x.cif(s & ENSCSIPERR)   printk("ENSCSIPERR ");
printk2598drivers/scsi/aha152x.cif(s & ENPHASECHG)   printk("ENPHASECHG ");
printk2599drivers/scsi/aha152x.cif(s & ENREQINIT)    printk("ENREQINIT ");
printk2600drivers/scsi/aha152x.cprintk(")\n");
printk2617drivers/scsi/aha152x.cprintk("aha152x: entering %s() (%x)\n", func, jiffies);
printk2620drivers/scsi/aha152x.cprintk("%s should leave first.\n", should_leave);
printk2635drivers/scsi/aha152x.cprintk("\naha152x: leaving %s() (%x)\n", func, jiffies);
printk2638drivers/scsi/aha152x.cprintk("aha152x: %s already left.\n", should_leave);
printk2653drivers/scsi/aha152x.cprintk("0x%08x: target=%d; lun=%d; cmnd=(",
printk2658drivers/scsi/aha152x.cprintk("); residual=%d; buffers=%d; phase |",
printk2661drivers/scsi/aha152x.cif(ptr->SCp.phase & not_issued  )  printk("not issued|");
printk2662drivers/scsi/aha152x.cif(ptr->SCp.phase & in_selection)  printk("in selection|");
printk2663drivers/scsi/aha152x.cif(ptr->SCp.phase & disconnected)  printk("disconnected|");
printk2664drivers/scsi/aha152x.cif(ptr->SCp.phase & aborted     )  printk("aborted|");
printk2665drivers/scsi/aha152x.cif(ptr->SCp.phase & sent_ident  )  printk("send_ident|");
printk2668drivers/scsi/aha152x.cprintk("; in other(");
printk2672drivers/scsi/aha152x.cprintk("DATA OUT");
printk2675drivers/scsi/aha152x.cprintk("DATA IN");
printk2678drivers/scsi/aha152x.cprintk("COMMAND");
printk2681drivers/scsi/aha152x.cprintk("STATUS");
printk2684drivers/scsi/aha152x.cprintk("MESSAGE OUT");
printk2687drivers/scsi/aha152x.cprintk("MESSAGE IN");
printk2690drivers/scsi/aha152x.cprintk("*illegal*");
printk2693drivers/scsi/aha152x.cprintk(")");
printk2695drivers/scsi/aha152x.cprintk("; phaseend");
printk2697drivers/scsi/aha152x.cprintk("; next=0x%08x\n", (unsigned int) ptr->host_scribble);
printk2710drivers/scsi/aha152x.cprintk("QUEUE STATUS:\nissue_SC:\n");
printk2714drivers/scsi/aha152x.cprintk("current_SC:\n");
printk2718drivers/scsi/aha152x.cprintk("none\n");
printk2720drivers/scsi/aha152x.cprintk("disconnected_SC:\n");
printk188drivers/scsi/aha1542.cprintk("aha1542_out failed(%d): ", len+1); aha1542_stat();
printk209drivers/scsi/aha1542.cprintk("aha1542_in failed(%d): ", len+1); aha1542_stat();
printk273drivers/scsi/aha1542.cDEB(printk("Aha1542: %x %x\n", hosterr, scsierr));
printk284drivers/scsi/aha1542.cprintk("makecode: unknown hoststatus %x\n", hosterr);
printk381drivers/scsi/aha1542.cprintk("aha1542_intr_handle: ");
printk382drivers/scsi/aha1542.cif (!(flag&ANYINTR)) printk("no interrupt?");
printk383drivers/scsi/aha1542.cif (flag&MBIF) printk("MBIF ");
printk384drivers/scsi/aha1542.cif (flag&MBOA) printk("MBOF ");
printk385drivers/scsi/aha1542.cif (flag&HACC) printk("HACC ");
printk386drivers/scsi/aha1542.cif (flag&SCRD) printk("SCRD ");
printk387drivers/scsi/aha1542.cprintk("status %02x\n", inb(STATUS(shost->io_port)));
printk401drivers/scsi/aha1542.cif (flag&MBOA) printk("MBOF ");
printk402drivers/scsi/aha1542.cif (flag&HACC) printk("HACC ");
printk405drivers/scsi/aha1542.cprintk("SCRD ");
printk426drivers/scsi/aha1542.cprintk("aha1542.c: interrupt received, but no mail.\n");
printk442drivers/scsi/aha1542.cprintk("aha1542_command: returning %x (status %d)\n", 
printk450drivers/scsi/aha1542.cprintk("...done %d %d\n",mbo, mbi);
printk456drivers/scsi/aha1542.cprintk("aha1542_intr_handle: Unexpected interrupt\n");
printk457drivers/scsi/aha1542.cprintk("tarstat=%x, hastat=%x idlun=%x ccb#=%d \n", ccb[mbo].tarstat, 
printk483drivers/scsi/aha1542.cif(errstatus) printk("(aha1542 error:%x %x %x) ",errstatus, 
printk491drivers/scsi/aha1542.cDEB(printk("aha1542_intr_handle: sense:"));
printk494drivers/scsi/aha1542.cprintk("%02x ", ccb[mbo].cdb[ccb[mbo].cdblen+i]);
printk495drivers/scsi/aha1542.cprintk("\n");
printk504drivers/scsi/aha1542.cDEB(if (errstatus) printk("aha1542_intr_handle: returning %6x\n", errstatus));
printk539drivers/scsi/aha1542.cprintk("Wrong buffer length supplied for request sense (%d)\n",bufflen);
printk555drivers/scsi/aha1542.cprintk("aha1542_queuecommand: dev %d cmd %02x pos %d len %d ", target, *cmd, i, bufflen);
printk557drivers/scsi/aha1542.cprintk("aha1542_command: dev %d cmd %02x pos %d len %d ", target, *cmd, i, bufflen);
printk559drivers/scsi/aha1542.cprintk("aha1542_queuecommand: dumping scsi cmd:");
printk560drivers/scsi/aha1542.cfor (i = 0; i < SCpnt->cmd_len; i++) printk("%02x ", cmd[i]);
printk561drivers/scsi/aha1542.cprintk("\n");
printk590drivers/scsi/aha1542.cprintk("Sending command (%d %x)...",mbo, done);
printk623drivers/scsi/aha1542.cprintk("Bad segment list supplied to aha1542.c (%d, %d)\n",SCpnt->use_sg,i);
printk625drivers/scsi/aha1542.cprintk("%d: %x %x %d\n",i,(unsigned int) sgpnt[i].address, (unsigned int) sgpnt[i].alt_address,
printk628drivers/scsi/aha1542.cprintk("cptr %x: ",(unsigned int) cptr);
printk630drivers/scsi/aha1542.cfor(i=0;i<18;i++) printk("%02x ", ptr[i]);
printk640drivers/scsi/aha1542.cprintk("cptr %x: ",cptr);
printk642drivers/scsi/aha1542.cfor(i=0;i<18;i++) printk("%02x ", ptr[i]);
printk658drivers/scsi/aha1542.cprintk("aha1542_command: sending.. ");
printk660drivers/scsi/aha1542.cprintk("%02x ", ((unchar *)&ccb[mbo])[i]);
printk665drivers/scsi/aha1542.cDEB(printk("aha1542_queuecommand: now waiting for interrupt "); aha1542_stat());
printk672drivers/scsi/aha1542.cprintk("aha1542_queuecommand: done can't be NULL\n");
printk686drivers/scsi/aha1542.cDEB(printk("aha1542_command: ..calling aha1542_queuecommand\n"));
printk718drivers/scsi/aha1542.cprintk("aha1542_detect: failed setting up mailboxes\n");
printk737drivers/scsi/aha1542.cprintk("aha1542_detect: query board settings\n");
printk751drivers/scsi/aha1542.cprintk("DMA priority 0 not available for Adaptec driver\n");
printk759drivers/scsi/aha1542.cprintk("Unable to determine Adaptec DMA priority.  Disabling board\n");
printk782drivers/scsi/aha1542.cprintk("Unable to determine Adaptec IRQ level.  Disabling board\n");
printk817drivers/scsi/aha1542.cprintk("aha1542_mbenable: Mailbox init failed\n");
printk838drivers/scsi/aha1542.cprintk("aha1542_detect: query card type\n");
printk851drivers/scsi/aha1542.cprintk("aha1542.c: Emulation mode not supported for AHA 174N hardware.\n");
printk872drivers/scsi/aha1542.cprintk("aha1542: aha1542_setup called too many times! Bad LILO params ?\n");
printk873drivers/scsi/aha1542.cprintk("   Entryline 1: %s\n",setup_str[0]);
printk874drivers/scsi/aha1542.cprintk("   Entryline 2: %s\n",setup_str[1]);
printk875drivers/scsi/aha1542.cprintk("   This line:   %s\n",str);
printk880drivers/scsi/aha1542.cprintk("aha1542: %s\n", str );
printk881drivers/scsi/aha1542.cprintk(ahausage);
printk882drivers/scsi/aha1542.cprintk("aha1542: Wrong parameters may cause system malfunction.. We try anyway..\n");
printk910drivers/scsi/aha1542.cprintk("aha1542: %s\n", str );
printk911drivers/scsi/aha1542.cprintk(ahausage);
printk912drivers/scsi/aha1542.cprintk("aha1542: Valid values for DMASPEED are 5-8, 10 MB/s.  Using jumper defaults.\n");
printk937drivers/scsi/aha1542.cDEB(printk("aha1542_detect: \n"));
printk949drivers/scsi/aha1542.cprintk("Invalid address for shpnt with 1542.\n");
printk985drivers/scsi/aha1542.cprintk("aha1542_detect: setting bus on/off-time failed\n");
printk993drivers/scsi/aha1542.cprintk("Configuring Adaptec (SCSI-ID %d) at IO:%x, IRQ %d", scsi_id, base_io, irq_level);
printk995drivers/scsi/aha1542.cprintk(", DMA priority %d", dma_chan);
printk996drivers/scsi/aha1542.cprintk("\n");
printk1003drivers/scsi/aha1542.cDEB(printk("aha1542_detect: enable interrupt channel %d\n", irq_level));
printk1007drivers/scsi/aha1542.cprintk("Unable to allocate IRQ for adaptec controller.\n");
printk1013drivers/scsi/aha1542.cprintk("Unable to allocate DMA channel for Adaptec.\n");
printk1032drivers/scsi/aha1542.cprintk("aha1542.c: Using extended bios translation\n");
printk1038drivers/scsi/aha1542.cDEB(printk(" *** READ CAPACITY ***\n"));
printk1048drivers/scsi/aha1542.cprintk("aha_detect: LU %d sector_size %d device_size %d\n",
printk1053drivers/scsi/aha1542.cDEB(printk(" *** NOW RUNNING MY OWN TEST *** \n"));
printk1100drivers/scsi/aha1542.cprintk("Potential to restart %d stalled commands...\n", count);
printk1120drivers/scsi/aha1542.cprintk("In aha1542_abort: %x %x\n",
printk1138drivers/scsi/aha1542.cprintk("Lost interrupt discovered on irq %d - attempting to recover\n", 
printk1151drivers/scsi/aha1542.cprintk("Timed out command pending for %s\n",
printk1154drivers/scsi/aha1542.cprintk("OGMB still full - restarting\n");
printk1158drivers/scsi/aha1542.cprintk("Other pending command %s\n",
printk1164drivers/scsi/aha1542.cDEB(printk("aha1542_abort\n"));
printk1225drivers/scsi/aha1542.cprintk("Sent BUS RESET to scsi host %d\n", SCpnt->host->host_no);
printk1234drivers/scsi/aha1542.cprintk("Sending DID_RESET for target %d\n", SCpnt->target);
printk1247drivers/scsi/aha1542.cprintk("aha1542.c: Unable to perform hard reset.\n");
printk1248drivers/scsi/aha1542.cprintk("Power cycle machine to reset\n");
printk1268drivers/scsi/aha1542.cprintk("Sent BUS DEVICE RESET to target %d\n", SCpnt->target);
printk1281drivers/scsi/aha1542.cprintk("Sending DID_RESET for target %d\n", SCpnt->target);
printk91drivers/scsi/aha1740.cprintk("makecode from %x,%x,%x,%x %x,%x,%x,%x",status[0],status[1],status[2],status[3],
printk129drivers/scsi/aha1740.cprintk("aha1740.c: WARNING: AHA1740 queue overflow!\n");
printk164drivers/scsi/aha1740.cprintk("aha1740: Board detected, but EBCNTRL = %x, so disabled it.\n",
printk172drivers/scsi/aha1740.cprintk("aha1740: Board detected, but not in enhanced mode, so disabled it.\n");
printk189drivers/scsi/aha1740.cDEB(printk("aha1740_intr top of loop.\n"));
printk202drivers/scsi/aha1740.cprintk("Aha1740 null ecbptr in interrupt (%x,%x,%x,%d)\n",
printk209drivers/scsi/aha1740.cprintk("Aha1740 null SCtmp in interrupt (%x,%x,%x,%d)\n",
printk226drivers/scsi/aha1740.cDEB(if (errstatus) printk("aha1740_intr_handle: returning %6x\n", errstatus));
printk234drivers/scsi/aha1740.cprintk("aha1740 hardware failure!\n");
printk237drivers/scsi/aha1740.cprintk("aha1740 asynchronous event: %02x %02x %02x %02x %02x\n",adapstat,
printk268drivers/scsi/aha1740.cprintk("Wrong buffer length supplied for request sense (%d)\n",bufflen);
printk282drivers/scsi/aha1740.cprintk("aha1740_queuecommand: dev %d cmd %02x pos %d len %d ", target, *cmd, i, bufflen);
printk283drivers/scsi/aha1740.cprintk("scsi cmd:");
printk284drivers/scsi/aha1740.cfor (i = 0; i < SCpnt->cmd_len; i++) printk("%02x ", cmd[i]);
printk285drivers/scsi/aha1740.cprintk("\n");
printk311drivers/scsi/aha1740.cprintk("Sending command (%d %x)...",ecbno, done);
printk345drivers/scsi/aha1740.cprintk("cptr %x: ",cptr);
printk347drivers/scsi/aha1740.cfor(i=0;i<24;i++) printk("%02x ", ptr[i]);
printk368drivers/scsi/aha1740.cprintk("aha1740_command: sending.. ");
printk370drivers/scsi/aha1740.cprintk("%02x ", ((unchar *)&ecb[ecbno])[i]);
printk372drivers/scsi/aha1740.cprintk("\n");
printk385drivers/scsi/aha1740.cDEB(printk("aha1740[%d] critical section\n",ecbno));
printk390drivers/scsi/aha1740.cprintk("aha1740[%d]_mbxout wait!\n",ecbno);
printk398drivers/scsi/aha1740.cprintk("aha1740[%d]_attn wait!\n",ecbno);
printk404drivers/scsi/aha1740.cDEB(printk("aha1740[%d] request queued.\n",ecbno));
printk407drivers/scsi/aha1740.cprintk("aha1740_queuecommand: done can't be NULL\n");
printk446drivers/scsi/aha1740.cDEB(printk("aha1740_detect: \n"));
printk470drivers/scsi/aha1740.cprintk("Configuring Adaptec at IO:%x, IRQ %d\n",base,
printk473drivers/scsi/aha1740.cDEB(printk("aha1740_detect: enable interrupt channel %d\n", irq_level));
printk477drivers/scsi/aha1740.cprintk("Unable to allocate IRQ for adaptec controller.\n");
printk494drivers/scsi/aha1740.cDEB(printk("aha1740_abort called\n"));
printk504drivers/scsi/aha1740.cDEB(printk("aha1740_reset called\n"));
printk511drivers/scsi/aha1740.cDEB(printk("aha1740_biosparam\n"));
printk1157drivers/scsi/aic7xxx.cprintk(buf);
printk1201drivers/scsi/aic7xxx.cprintk("%s%s AT EISA SLOT %d:\n", board_names[p->type], BUSW[p->bus_type],
printk1206drivers/scsi/aic7xxx.cprintk("%s%s AT VLB SLOT %d:\n", board_names[p->type], BUSW[p->bus_type],
printk1221drivers/scsi/aic7xxx.cprintk("%s%s (PCI-bus):\n", board_names[p->type], BUSW[p->bus_type]);
printk1228drivers/scsi/aic7xxx.cprintk("    irq %d\n"
printk1235drivers/scsi/aic7xxx.cprintk("    SCSI CHANNEL A:\n"
printk1252drivers/scsi/aic7xxx.cprintk("        scsi bus parity %sabled\n",
printk1262drivers/scsi/aic7xxx.cprintk("        scsi bus termination (low byte) %sabled\n",
printk1267drivers/scsi/aic7xxx.cprintk("        scsi bus termination (high byte) %sabled\n",
printk1276drivers/scsi/aic7xxx.cprintk("control 0x%x, tcl 0x%x, sg_count %d, sg_ptr 0x%x, cmdp 0x%x, cmdlen %d\n",
printk1283drivers/scsi/aic7xxx.cprintk("reserved 0x%x, target status 0x%x, resid SG count %d, resid data count %d\n",
printk1287drivers/scsi/aic7xxx.cprintk("data ptr 0x%x, data count %d, host scb 0x%x, next waiting %d\n",
printk1292drivers/scsi/aic7xxx.cprintk("next ptr 0x%lx, Scsi Cmnd 0x%lx, state 0x%x, position %d\n",
printk1571drivers/scsi/aic7xxx.cprintk ("aic7xxx: Target %d, channel %c, requests %sMB/s transfers, "
printk1594drivers/scsi/aic7xxx.cprintk("aic7xxx: Target %d, channel %c, now synchronous at %sMB/s, "
printk1605drivers/scsi/aic7xxx.cprintk("aic7xxx: Target %d, channel %c, using asynchronous transfers.\n",
printk1697drivers/scsi/aic7xxx.cprintk ("aic7xxx: (match_scb) comparing target/channel %d/%c to scb %d/%c\n",
printk1724drivers/scsi/aic7xxx.cprintk ("aic7xxx: (unbusy_target) target/channel %d/%c\n",
printk1754drivers/scsi/aic7xxx.cprintk ("aic7xxx: (done) target/channel %d/%d\n",
printk1918drivers/scsi/aic7xxx.cprintk ("aic7xxx: (abort_waiting_scb) target/channel %d/%c, prev %d, "
printk1948drivers/scsi/aic7xxx.cprintk ("aic7xxx: (reset_device) target/channel %d/%c, to_scb %d, "
printk2053drivers/scsi/aic7xxx.cprintk ("aic7xxx: (reset_current_bus)\n");
printk2078drivers/scsi/aic7xxx.cprintk ("aic7xxx: (reset_channel) channel %c, to_scb %d\n",
printk2142drivers/scsi/aic7xxx.cprintk ("aic7xxx: (reset_channel) Stealthily resetting channel %c\n",
printk2160drivers/scsi/aic7xxx.cprintk ("aic7xxx: (reset_channel) Resetting current channel %c\n",
printk2220drivers/scsi/aic7xxx.cprintk("aic7xxx: (aic7xxx_isr) Encountered spurious interrupt.\n");
printk2246drivers/scsi/aic7xxx.cprintk("aic7xxx: (aic7xxx_isr) Encountered spurious interrupt.\n");
printk2262drivers/scsi/aic7xxx.cprintk("aic7xxx: (aic7xxx_isr) BRKADRINT error(0x%x):\n", errno);
printk2267drivers/scsi/aic7xxx.cprintk("  %s\n", hard_error[i].errmesg);
printk2311drivers/scsi/aic7xxx.cprintk("aic7xxx: Warning - Tagged message rejected for target %d,"
printk2325drivers/scsi/aic7xxx.cprintk("aic7xxx: No active SCB for reconnecting target %d, "
printk2390drivers/scsi/aic7xxx.cprintk("aic7xxx: Sending SDTR!!\n");
printk2410drivers/scsi/aic7xxx.cprintk("aic7xxx: Received MSG_WDTR, Target %d, channel %c "
printk2427drivers/scsi/aic7xxx.cprintk("aic7xxx: Target %d, channel %c, using 16 bit "
printk2438drivers/scsi/aic7xxx.cprintk("aic7xxx: Will send WDTR!!\n");
printk2453drivers/scsi/aic7xxx.cprintk("aic7xxx: Target %d, channel %c, using 16 bit "
printk2487drivers/scsi/aic7xxx.cprintk("aic7xxx: Target %d, channel %c, refusing WIDE negotiation. "
printk2501drivers/scsi/aic7xxx.cprintk("aic7xxx: Target %d, channel %c, refusing synchronous "
printk2520drivers/scsi/aic7xxx.cprintk("aic7xxx: Referenced SCB not valid during SEQINT(0x%x) "
printk2535drivers/scsi/aic7xxx.cprintk("aic7xxx: Interrupted for status of GOOD???\n");
printk2609drivers/scsi/aic7xxx.cprintk("aic7xxx: Target busy.\n");
printk2617drivers/scsi/aic7xxx.cprintk("aic7xxx: Queue full.\n");
printk2625drivers/scsi/aic7xxx.cprintk("aic7xxx: Unexpected target status(0x%x).\n",
printk2641drivers/scsi/aic7xxx.cprintk("aic7xxx: Referenced SCB not valid during SEQINT(0x%x) "
printk2668drivers/scsi/aic7xxx.cprintk("aic7xxx: Target %d underflow - "
printk2684drivers/scsi/aic7xxx.cprintk("aic7xxx: Referenced SCB not valid during SEQINT(0x%x) "
printk2695drivers/scsi/aic7xxx.cprintk("aic7xxx: Invalid tag received on target %d, channel %c, "
printk2709drivers/scsi/aic7xxx.cprintk("aic7xxx: Referenced SCB not valid during SEQINT(0x%x) "
printk2723drivers/scsi/aic7xxx.cprintk ("aic7xxx: (isr) sending bus device reset to target %d\n",
printk2741drivers/scsi/aic7xxx.cprintk ("aic7xxx: (isr) received IMMEDDONE for target %d, scb %d, state %d\n",
printk2784drivers/scsi/aic7xxx.cprintk("aic7xxx: No command for SCB (SCSIINT).\n");
printk2870drivers/scsi/aic7xxx.cprintk("aic7xxx: SELTO SCB(%d) state(0x%x) cmd(0x%x).\n",
printk2882drivers/scsi/aic7xxx.cprintk("aic7xxx: Parity error on target %d, channel %d, lun %d.\n",
printk2903drivers/scsi/aic7xxx.cprintk("aic7xxx: SSTAT1(0x%x).\n", status);
printk2929drivers/scsi/aic7xxx.cprintk("aic7xxx: Warning - No command for SCB %d (CMDCMPLT).\n"
printk2947drivers/scsi/aic7xxx.cprintk("aic7xxx: (complete) State(%d) cmd(0x%x) free(0x%x).\n",
printk2965drivers/scsi/aic7xxx.cprintk("aic7xxx: (complete) Address mismatch, pos(%d).\n", scb->position);
printk2967drivers/scsi/aic7xxx.cprintk("aic7xxx: (complete) State(%d) cmd(0x%x) free(0x%x).\n",
printk3078drivers/scsi/aic7xxx.cprintk("aic7xxx: Disabled at slot %d, ignored.\n", slot);
printk3208drivers/scsi/aic7xxx.cprintk("Computed checksum 0x%x, checksum read 0x%x\n", checksum, sc->checksum);
printk3209drivers/scsi/aic7xxx.cprintk("Serial EEPROM:");
printk3214drivers/scsi/aic7xxx.cprintk("\n              ");
printk3216drivers/scsi/aic7xxx.cprintk(" 0x%x", seeprom[k]);
printk3218drivers/scsi/aic7xxx.cprintk("\n");
printk3223drivers/scsi/aic7xxx.cprintk("aic7xxx: SEEPROM checksum error, ignoring SEEPROM settings.\n");
printk3406drivers/scsi/aic7xxx.cprintk("Computed checksum 0x%x, checksum read 0x%x\n", checksum, sc->checksum);
printk3407drivers/scsi/aic7xxx.cprintk("Serial EEPROM:");
printk3412drivers/scsi/aic7xxx.cprintk("\n              ");
printk3414drivers/scsi/aic7xxx.cprintk(" 0x%x", seeprom[k]);
printk3416drivers/scsi/aic7xxx.cprintk("\n");
printk3421drivers/scsi/aic7xxx.cprintk("aic7xxx: SEEPROM checksum error, ignoring SEEPROM settings.\n");
printk3463drivers/scsi/aic7xxx.cprintk("aic7770: Rev E and subsequent; using 4 SCB's.\n");
printk3469drivers/scsi/aic7xxx.cprintk("aic7770: Rev C and previous; using 4 SCB's.\n");
printk3580drivers/scsi/aic7xxx.cprintk("aic7xxx: Chip reset not cleared; clearing manually.\n");
printk3603drivers/scsi/aic7xxx.cprintk("aic7xxx: Extended translation %sabled.\n",
printk3622drivers/scsi/aic7xxx.cprintk("aic7xxx: Reading SEEPROM...");
printk3626drivers/scsi/aic7xxx.cprintk("aic7xxx: Unable to read SEEPROM.\n");
printk3631drivers/scsi/aic7xxx.cprintk("done.\n");
printk3653drivers/scsi/aic7xxx.cprintk("aic7xxx: Extended translation %sabled.\n",
printk3677drivers/scsi/aic7xxx.cprintk("aic7xxx: Reading SEEPROM...");
printk3681drivers/scsi/aic7xxx.cprintk("aic7xxx: Unable to read SEEPROM.\n");
printk3685drivers/scsi/aic7xxx.cprintk("done.\n");
printk3699drivers/scsi/aic7xxx.cprintk ("aic7xxx: Enabling support for Ultra SCSI speed.\n");
printk3716drivers/scsi/aic7xxx.cprintk("aic7xxx: Extended translation %sabled.\n",
printk3730drivers/scsi/aic7xxx.cprintk("aic7xxx: Using level sensitive interrupts.\n");
printk3734drivers/scsi/aic7xxx.cprintk("aic7xxx: Using edge triggered interrupts.\n");
printk3754drivers/scsi/aic7xxx.cprintk("aic7xxx: Enabling wide channel of %s-Wide.\n",
printk3764drivers/scsi/aic7xxx.cprintk("aic7xxx: Enabled channel B of %s-Twin.\n",
printk3769drivers/scsi/aic7xxx.cprintk("aic7xxx: Channel B of %s-Twin will be ignored.\n",
printk3776drivers/scsi/aic7xxx.cprintk("aic7xxx: Unsupported type 0x%x, please "
printk3801drivers/scsi/aic7xxx.cprintk("aic7xxx: Host adapter uses unsupported IRQ level, ignoring.\n");
printk3815drivers/scsi/aic7xxx.cprintk("aic7xxx: Sharing of IRQ's is not configured.\n");
printk3840drivers/scsi/aic7xxx.cprintk("aic7xxx: Warning - Kernel scatter-gather structures changed, "
printk3916drivers/scsi/aic7xxx.cprintk("aic7xxx: Couldn't register IRQ %d, ignoring.\n", config->irq);
printk3939drivers/scsi/aic7xxx.cprintk("aic7xxx: Downloading sequencer code...");
printk3952drivers/scsi/aic7xxx.cprintk("done.\n");
printk4019drivers/scsi/aic7xxx.cprintk("aic7xxx : Host adapter BIOS disabled. Using default SCSI "
printk4076drivers/scsi/aic7xxx.cprintk("NeedSdtr = 0x%x, 0x%x\n", p->needsdtr_copy, p->needsdtr);
printk4077drivers/scsi/aic7xxx.cprintk("NeedWdtr = 0x%x, 0x%x\n", p->needwdtr_copy, p->needwdtr);
printk4123drivers/scsi/aic7xxx.cprintk("aic7xxx: Resetting the SCSI bus...");
printk4147drivers/scsi/aic7xxx.cprintk("done.\n");
printk4345drivers/scsi/aic7xxx.cprintk("aic7xxx: %s Rev %c.\n", board_names[config.type],
printk4365drivers/scsi/aic7xxx.cprintk("aic7xxx: devconfig(0x%x) devstatus(0x%x).\n",
printk4436drivers/scsi/aic7xxx.cprintk("aic7xxx: Enabling tagged queuing for target %d, "
printk4456drivers/scsi/aic7xxx.cprintk("aic7xxx: Sending WDTR request to target %d.\n", cmd->target);
printk4466drivers/scsi/aic7xxx.cprintk("aic7xxx: Sending SDTR request to target %d.\n", cmd->target);
printk4472drivers/scsi/aic7xxx.cprintk("aic7xxx: (build_scb) Target %d, cmd(0x%x) size(%u) wdtr(0x%x) "
printk4564drivers/scsi/aic7xxx.cprintk("aic7xxx: Scanning channel A for devices.\n");
printk4571drivers/scsi/aic7xxx.cprintk("aic7xxx: Scanning channel B for devices.\n");
printk4663drivers/scsi/aic7xxx.cprintk("aic7xxx: (queue) Address of SCB by position does not match SCB "
printk4666drivers/scsi/aic7xxx.cprintk("aic7xxx: (queue) SCB pos(%d) cmdptr(0x%x) state(%d) freescb(0x%x)\n",
printk4700drivers/scsi/aic7xxx.cprintk("aic7xxx: (queue) After - cmd(0x%lx) scb->cmd(0x%lx) pos(%d).\n",
printk4734drivers/scsi/aic7xxx.cprintk ("aic7xxx: (abort_scb) scb %d, scb_aborted 0x%x\n",
printk4779drivers/scsi/aic7xxx.cprintk ("aic7xxx: (abort_scb) scb %d is disconnected.\n", scb->position);
printk4810drivers/scsi/aic7xxx.cprintk ("aic7xxx: (abort_scb) scb is active, needs DMA, "
printk4824drivers/scsi/aic7xxx.cprintk ("aic7xxx: (abort_scb) scb is active, needs DMA, "
printk4852drivers/scsi/aic7xxx.cprintk ("aic7xxx: (abort_scb) no active command.\n");
printk4888drivers/scsi/aic7xxx.cprintk ("aic7xxx: (abort_reset) scb state 0x%x\n", scb->state);
printk4919drivers/scsi/aic7xxx.cprintk ("aic7xxx: (abort_reset) called with no active scb, errcode 0x%x\n",
printk4950drivers/scsi/aic7xxx.cprintk ("aic7xxx: (abort) target/channel %d/%d\n", cmd->target, cmd->channel);
printk4982drivers/scsi/aic7xxx.cprintk ("aic7xxx: (reset) target/channel %d/%d\n", cmd->target, cmd->channel);
printk45drivers/scsi/aic7xxx_proc.cprintk(buf);
printk95drivers/scsi/constants.cprintk("%s(0x%02x) ", reserved, opcode); 
printk98drivers/scsi/constants.cprintk("%s(0x%02x) ", unknown, opcode); 
printk101drivers/scsi/constants.cprintk("%s(0x%02x) ", vendor, opcode); 
printk104drivers/scsi/constants.cprintk("%s ",table[opcode & 0x1f]);
printk109drivers/scsi/constants.cprintk("0x%02x ", opcode);
printk117drivers/scsi/constants.cprintk("%02x ", command[i]);
printk118drivers/scsi/constants.cprintk("\n");
printk133drivers/scsi/constants.cprintk("%s ",statuses[status]);
printk135drivers/scsi/constants.cprintk("0x%0x ", status); 
printk392drivers/scsi/constants.cprintk("extra data not valid ");
printk394drivers/scsi/constants.cif (sense_buffer[2] & 0x80) printk( "FMK ");
printk395drivers/scsi/constants.cif (sense_buffer[2] & 0x40) printk( "EOM ");
printk396drivers/scsi/constants.cif (sense_buffer[2] & 0x20) printk( "ILI ");
printk409drivers/scsi/constants.cprintk("%s error ", error);
printk412drivers/scsi/constants.cprintk( "%s%s: sense key %s\n", devclass,
printk415drivers/scsi/constants.cprintk("%s%s: sns = %2x %2x\n", devclass,
printk427drivers/scsi/constants.cprintk("Additional sense indicates %s\n", additional[i].text);
printk433drivers/scsi/constants.cprintk("Additional sense indicates ");
printk434drivers/scsi/constants.cprintk(additional2[i].text, sense_buffer[13]);
printk435drivers/scsi/constants.cprintk("\n");
printk438drivers/scsi/constants.cprintk("ASC=%2x ASCQ=%2x\n", sense_buffer[12], sense_buffer[13]);
printk444drivers/scsi/constants.cprintk("%s%s: old sense key %s\n", devclass,
printk448drivers/scsi/constants.cprintk("%s%s: sns = %2x %2x\n", devclass,
printk451drivers/scsi/constants.cprintk("Non-extended sense class %d code 0x%0x ", sense_class, code);
printk457drivers/scsi/constants.cprintk("Raw sense data:");
printk459drivers/scsi/constants.cprintk("0x%02x ", sense_buffer[i]);
printk460drivers/scsi/constants.cprintk("\n");
printk498drivers/scsi/constants.cprintk ("%s ", extended_msgs[msg[2]]); 
printk500drivers/scsi/constants.cprintk ("Extended Message, reserved code (0x%02x) ", (int) msg[2]);
printk503drivers/scsi/constants.cprintk("pointer = %d", (int) (msg[3] << 24) | (msg[4] << 16) | 
printk507drivers/scsi/constants.cprintk("period = %d ns, offset = %d", (int) msg[3] * 4, (int) 
printk511drivers/scsi/constants.cprintk("width = 2^%d bytes", msg[3]);
printk515drivers/scsi/constants.cprintk("%02x ", msg[i]);
printk519drivers/scsi/constants.cprintk("%02x ", msg[i]);
printk524drivers/scsi/constants.cprintk("Identify disconnect %sallowed %s %d ",
printk529drivers/scsi/constants.cprintk("%02x ", msg[0]);
printk536drivers/scsi/constants.cprintk(one_byte_msgs[msg[0]]);
printk538drivers/scsi/constants.cprintk("reserved (%02x) ", msg[0]);
printk540drivers/scsi/constants.cprintk("%02x ", msg[0]);
printk547drivers/scsi/constants.cprintk("%s %02x ", two_byte_msgs[msg[0] - 0x20], 
printk550drivers/scsi/constants.cprintk("reserved two byte (%02x %02x) ", 
printk553drivers/scsi/constants.cprintk("%02x %02x", msg[0], msg[1]);
printk558drivers/scsi/constants.cprintk(reserved);
printk560drivers/scsi/constants.cprintk("%02x ", msg[0]);
printk566drivers/scsi/constants.cprintk("scsi%d : destination target %d, lun %d\n", 
printk570drivers/scsi/constants.cprintk("        command = ");
printk587drivers/scsi/constants.cprintk("Hostbyte=0x%02x",host_byte(scsiresult));
printk589drivers/scsi/constants.cprintk("is invalid "); 
printk592drivers/scsi/constants.cprintk("(%s) ",hostbyte_table[host_byte(scsiresult)]);
printk596drivers/scsi/constants.c{   printk("Hostbyte=0x%02x ",host_byte(scsiresult));
printk621drivers/scsi/constants.cprintk("Driverbyte=0x%02x",driver_byte(scsiresult));
printk622drivers/scsi/constants.cprintk("(%s,%s) ",
printk628drivers/scsi/constants.c{   printk("Driverbyte=0x%02x ",driver_byte(scsiresult));
printk383drivers/scsi/eata.cprintk("%s: address 0x%03x in use, skipping probe.\n", 
printk398drivers/scsi/eata.cprintk("%s: config structure size (%ld bytes) too short, detaching.\n", 
printk410drivers/scsi/eata.cprintk("%s: warning, only scsi channel 0 is supported.\n", name);
printk417drivers/scsi/eata.cprintk("%s: unusable EISA board found (%d%d%d), detaching.\n", 
printk428drivers/scsi/eata.cprintk("%s: unusable ISA board found (%d%d%d), detaching.\n",
printk438drivers/scsi/eata.cprintk("%s: warning, DMA protocol support not asserted.\n", name);
printk441drivers/scsi/eata.cprintk("%s: warning, LEVEL triggering is suggested for IRQ %u.\n",
printk452drivers/scsi/eata.cprintk("%s: unable to allocate IRQ %u, detaching.\n", name, irq);
printk457drivers/scsi/eata.cprintk("%s: unable to allocate DMA channel %u, detaching.\n",
printk473drivers/scsi/eata.cprintk("%s: busy timeout sending configuration, detaching.\n", name);
printk482drivers/scsi/eata.cprintk("%s: unable to register host, detaching.\n", name);
printk522drivers/scsi/eata.cprintk("%s: 2.0%c, %s, ID %d, PORT 0x%03x, IRQ %u, DMA %u, SG %d, "\
printk529drivers/scsi/eata.cprintk("%s: detect, forcing to use %d SG lists.\n", BN(j), MAX_SGLIST);
printk535drivers/scsi/eata.cprintk("%s: detect, forcing to use %d Mbox.\n", BN(j), MAX_MAILBOXES);
printk541drivers/scsi/eata.cprintk("%s: EATA 2.0%c, isaena %u, forcaddr %u, max_id %u,"\
printk545drivers/scsi/eata.cprintk("%s: Version 0x%x, SYNC 0x%x, infol %ld, cpl %ld spl %ld.\n", 
printk584drivers/scsi/eata.cprintk("EATA/DMA 2.0x: Copyright (C) 1994, 1995 Dario Ballabio.\n");
printk638drivers/scsi/eata.cprintk("%s: qcomm, no free mailbox, resetting.\n", BN(j));
printk641drivers/scsi/eata.cprintk("%s: qcomm, already in reset.\n", BN(j));
printk647drivers/scsi/eata.cprintk("%s: qcomm, pid %ld, DID_BUS_BUSY, done.\n", BN(j), SCpnt->pid);
printk670drivers/scsi/eata.cif (do_trace) printk("%s: qcomm, mbox %d, target %d, pid %ld.\n",
printk704drivers/scsi/eata.cprintk("%s: qcomm, target %d, pid %ld, adapter busy, DID_ERROR, done.\n", 
printk724drivers/scsi/eata.cprintk("%s: abort, target %d, pid %ld inactive.\n",
printk731drivers/scsi/eata.cprintk("%s: abort, mbox %d, target %d, pid %ld.\n", 
printk738drivers/scsi/eata.cprintk("%s: abort, timeout error.\n", BN(j));
printk744drivers/scsi/eata.cprintk("%s: abort, mbox %d is free.\n", BN(j), i);
printk750drivers/scsi/eata.cprintk("%s: abort, mbox %d is in use.\n", BN(j), i);
printk761drivers/scsi/eata.cprintk("%s: abort, mbox %d is in reset.\n", BN(j), i);
printk767drivers/scsi/eata.cprintk("%s: abort, mbox %d is locked.\n", BN(j), i);
printk783drivers/scsi/eata.cprintk("%s: reset, enter, target %d, pid %ld.\n", 
printk787drivers/scsi/eata.cprintk("%s: reset, pid %ld inactive.\n", BN(j), SCarg->pid);
printk790drivers/scsi/eata.cprintk("%s: reset, exit, already in reset.\n", BN(j));
printk796drivers/scsi/eata.cprintk("%s: reset, exit, timeout error.\n", BN(j));
printk811drivers/scsi/eata.cprintk("%s: reset, locked mbox %d forced free.\n", BN(j), i);
printk817drivers/scsi/eata.cprintk("%s: reset, mbox %d in reset, pid %ld.\n",
printk836drivers/scsi/eata.cprintk("%s: reset, cannot reset, timeout error.\n", BN(j));
printk841drivers/scsi/eata.cprintk("%s: reset, board reset done, enabling interrupts.\n", BN(j));
printk852drivers/scsi/eata.cprintk("%s: reset, interrupts disabled, loops %d.\n", BN(j), limit);
printk866drivers/scsi/eata.cprintk("%s, reset, mbox %d locked, DID_RESET, pid %ld done.\n",
printk878drivers/scsi/eata.cprintk("%s: reset, exit, success.\n", BN(j));
printk882drivers/scsi/eata.cprintk("%s: reset, exit, wakeup.\n", BN(j));
printk897drivers/scsi/eata.cprintk("%s, ihdlr, irq %d, unexpected interrupt.\n", driver_name, irq);
printk902drivers/scsi/eata.cif (do_trace) printk("%s: ihdlr, enter, irq %d, calls %d.\n", 
printk917drivers/scsi/eata.cif (do_trace) printk("%s: ihdlr, start service, count %d.\n",
printk938drivers/scsi/eata.cprintk("%s: ihdlr, mbox %d unlocked, count %d.\n",
printk943drivers/scsi/eata.cprintk("%s: ihdlr, mbox %d is free, count %d.\n", 
printk948drivers/scsi/eata.cprintk("%s: ihdlr, mbox %d is in reset.\n", BN(j), i);
printk1000drivers/scsi/eata.cprintk("%s: ihdlr, target %d:%d, pid %ld, target_status "\
printk1057drivers/scsi/eata.cprintk("%s: ihdlr, mbox %d, err 0x%x:%x,"\
printk1078drivers/scsi/eata.cprintk("%s: ihdlr, irq %d, no command completed, calls %d.\n",
printk1081drivers/scsi/eata.cif (do_trace) printk("%s: ihdlr, exit, irq %d, calls %d.\n", 
printk1087drivers/scsi/eata.cprintk("%s: ihdlr, calls %d, count %d, multi %d.\n", BN(j),
printk121drivers/scsi/eata_dma.cDBG(DBG_INTR3, printk("eata_fake_int_handler called irq%d base %p"
printk181drivers/scsi/eata_dma.cprintk("eata_dma: int_handler, Spurious IRQ %d "
printk194drivers/scsi/eata_dma.cprintk("eata_dma: int_handler, board: %x cmd %lx returned "
printk206drivers/scsi/eata_dma.cprintk("eata_dma: int_handler, freeing locked queueslot\n");
printk212drivers/scsi/eata_dma.cDBG(DBG_INTR, printk("IRQ %d received, base %#.4x, pid %ld, "
printk291drivers/scsi/eata_dma.cprintk("HBA: %d, channel %d, id: %d, lun %d, pid %ld:\n" 
printk376drivers/scsi/eata_dma.cprintk(KERN_EMERG "eata_dma: run out of queue slots cmdno:%ld"
printk379drivers/scsi/eata_dma.cprintk(KERN_EMERG "Status of queueslots:");
printk383drivers/scsi/eata_dma.cprintk(KERN_EMERG "Slot %2d is FREE  \t", z);
printk386drivers/scsi/eata_dma.cprintk(KERN_EMERG "Slot %2d is USED  \t", z);
printk389drivers/scsi/eata_dma.cprintk(KERN_EMERG "Slot %2d is LOCKED\t", z);
printk392drivers/scsi/eata_dma.cprintk(KERN_EMERG "Slot %2d is UNKNOWN\t", z);
printk403drivers/scsi/eata_dma.cDBG(DBG_QUEUE, printk("eata_queue pid %ld, target: %x, lun: %x, y %d\n",
printk513drivers/scsi/eata_dma.cprintk("eata_queue target %d, pid %ld, HBA busy, "
printk520drivers/scsi/eata_dma.cDBG(DBG_QUEUE, printk("Queued base %#.4x pid: %ld target: %x lun: %x "
printk537drivers/scsi/eata_dma.cDBG(DBG_ABNORM, printk("eata_abort called pid: %ld target: %x lun: %x"
printk544drivers/scsi/eata_dma.cprintk("eata_dma: abort, timeout error.\n");
printk552drivers/scsi/eata_dma.cprintk("eata_dma: abort, command reset error.\n");
printk558drivers/scsi/eata_dma.cDBG(DBG_ABNORM, printk("eata_dma: abort, queue slot locked.\n"));
printk563drivers/scsi/eata_dma.cDBG(DBG_ABNORM, printk("Returning: SCSI_ABORT_BUSY\n"));
printk568drivers/scsi/eata_dma.cDBG(DBG_ABNORM, printk("Returning: SCSI_ABORT_NOT_RUNNING\n")); 
printk588drivers/scsi/eata_dma.cDBG(DBG_ABNORM, printk("eata_reset called pid:%ld target: %x lun: %x"
printk593drivers/scsi/eata_dma.cprintk("eata_reset: exit, already in reset.\n");
printk601drivers/scsi/eata_dma.cprintk("eata_reset: exit, timeout error.\n");
printk620drivers/scsi/eata_dma.cprintk("eata_reset: locked slot %d forced free.\n", x);
printk626drivers/scsi/eata_dma.cprintk("eata_reset: slot %d in reset, pid %ld.\n", x, sp->pid);
printk641drivers/scsi/eata_dma.cDBG(DBG_ABNORM, printk("eata_reset: board reset done, enabling interrupts.\n"));
printk653drivers/scsi/eata_dma.cDBG(DBG_ABNORM, printk("eata_reset: interrupts disabled, loops %ld.\n", 
printk669drivers/scsi/eata_dma.cprintk("eata_reset: slot %d locked, DID_RESET, pid %ld done.\n",
printk681drivers/scsi/eata_dma.cDBG(DBG_ABNORM, printk("eata_reset: exit, success.\n"));
printk685drivers/scsi/eata_dma.cDBG(DBG_ABNORM, printk("eata_reset: exit, wakeup.\n"));
printk740drivers/scsi/eata_dma.cDBG(DBG_INTR3, printk("fake_int_result: %#x hbastat %#x scsistat %#x,"
printk773drivers/scsi/eata_dma.cDBG(DBG_BLINK, printk("Did Blink check. Status: %d\n",
printk797drivers/scsi/eata_dma.cprintk("Issuing PIO READ CONFIG to HBA at %#x\n", base));
printk813drivers/scsi/eata_dma.cDBG(DBG_PIO&&DBG_PROBE, printk("EATA Controller found at %x "
printk822drivers/scsi/eata_dma.cDBG(DBG_PROBE, printk("eata_dma: get_conf_PIO, error during transfer "
printk830drivers/scsi/eata_dma.cprintk("LEN: %d ver:%d OCS:%d TAR:%d TRNXFR:%d MORES:%d DMAS:%d\n",
printk834drivers/scsi/eata_dma.cprintk("DMAV:%d HAAV:%d SCSIID0:%d ID1:%d ID2:%d QUEUE:%d SG:%d SEC:%d\n",
printk837drivers/scsi/eata_dma.cprintk("IRQ:%d IRQT:%d DMAC:%d FORCADR:%d SG_64K:%d SG_UAE:%d MID:%d "
printk841drivers/scsi/eata_dma.cprintk("RIDQ:%d PCI:%d EISA:%d\n",
printk861drivers/scsi/eata_dma.cprintk("The EATA HBA at %#.4x does not support DMA.\n" 
printk875drivers/scsi/eata_dma.cprintk("Couldn't allocate IRQ %d, Sorry.", gc->IRQ);
printk880drivers/scsi/eata_dma.cprintk("Can't support more than one HBA on this IRQ,\n"
printk891drivers/scsi/eata_dma.cprintk("Unable to allocate DMA channel %d for ISA HBA at %#.4x.\n",
printk914drivers/scsi/eata_dma.cprintk("HBA at %#.4x doesn't support DMA. Sorry\n", base);
printk916drivers/scsi/eata_dma.cprintk("HBA at %#.4x does not react on INQUIRY. Sorry.\n", 
printk932drivers/scsi/eata_dma.cprintk("HBA %.12sat %#.4x doesn't set the DMA_support flag correctly.\n",
printk942drivers/scsi/eata_dma.cprintk("Warning: Queue size has to be corrected. Assuming 64 queueslots\n"
printk949drivers/scsi/eata_dma.cDBG(DBG_REGISTER, printk("scsi_register size: %ld\n", size));
printk1072drivers/scsi/eata_dma.cprintk("Warning: SG size had to be corrected.\n"
printk1129drivers/scsi/eata_dma.cDBG(DBG_PROBE, printk("EISA EATA id tags found: %x %x %x \n",
printk1134drivers/scsi/eata_dma.cDBG(DBG_EISA, printk("Registering EISA HBA\n"));
printk1137drivers/scsi/eata_dma.cprintk("eata_dma: No valid IRQ. HBA removed from list\n");
printk1140drivers/scsi/eata_dma.cprintk("HBA is in BLINK state. Consult your HBAs "
printk1160drivers/scsi/eata_dma.cDBG(DBG_ISA, printk("Registering ISA HBA\n"));
printk1164drivers/scsi/eata_dma.cprintk("HBA is in BLINK state. Consult your HBAs "
printk1177drivers/scsi/eata_dma.cprintk("eata_dma: kernel PCI support not enabled. Skipping scan for PCI HBAs.\n");
printk1194drivers/scsi/eata_dma.cprintk("eata_dma: find_PCI, HBA at bus %d, device %d,"
printk1207drivers/scsi/eata_dma.cprintk("eata_dma: find_PCI, HBA has IO or BUSMASTER mode disabled\n");
printk1211drivers/scsi/eata_dma.cprintk("eata_dma: find_PCI, error %x while reading "
printk1214drivers/scsi/eata_dma.cprintk("eata_dma: find_PCI, DEVICECLASSID %x didn't match\n", 
printk1217drivers/scsi/eata_dma.cprintk("eata_dma: find_PCI, error %x while reading PCI_CLASS_BASE\n", 
printk1249drivers/scsi/eata_dma.cDBG(DBG_PCI, printk("Registering PCI HBA\n"));
printk1263drivers/scsi/eata_dma.cprintk("eata_dma: HBA is in BLINK state.\n"
printk1269drivers/scsi/eata_dma.cprintk("eata_dma: error %x while reading "
printk1274drivers/scsi/eata_dma.cprintk("eata_dma: No BIOS32 extensions present. This driver release "
printk1289drivers/scsi/eata_dma.cprintk("Using lots of delays to let you read the debugging output\n"));
printk1297drivers/scsi/eata_dma.cprintk("eata_dma: can't allocate enough memory to probe for hosts !\n");
printk1316drivers/scsi/eata_dma.cprintk("EATA (Extended Attachment) driver version: %d.%d%s\n"
printk1320drivers/scsi/eata_dma.cprintk("Registered HBAs:");
printk1321drivers/scsi/eata_dma.cprintk("\nHBA no. Boardtype: Revis: EATA: Bus: BaseIO: IRQ: DMA: Ch: "
printk1324drivers/scsi/eata_dma.cprintk("scsi%-2d: %.10s v%s 2.0%c  %s %#.4x   %2d",
printk1330drivers/scsi/eata_dma.cprintk("   %2x ", HBA_ptr->dma_channel);
printk1332drivers/scsi/eata_dma.cprintk("  %s", "BMST");
printk1333drivers/scsi/eata_dma.cprintk("  %d   %d   %c  %2d  %2d   %2d\n", SD(HBA_ptr)->channel, 
printk49drivers/scsi/eata_dma_proc.cprintk("Unknown command:%s length: %d\n", buffer, length);
printk51drivers/scsi/eata_dma_proc.cprintk("Wrong Signature:%10s\n", buffer);
printk462drivers/scsi/eata_dma_proc.cDBG(DBG_PROC, printk("2pos: %ld offset: %ld len: %d\n", pos, offset, len));
printk467drivers/scsi/eata_dma_proc.cDBG(DBG_PROC, printk("3pos: %ld offset: %ld len: %d\n", pos, offset, len));
printk243drivers/scsi/eata_pio.cprintk("eata_pio: int_handler, freeing locked queueslot\n");
printk251drivers/scsi/eata_pio.cprintk("stat: %#.2x, result: %#.8x\n", stat, cmd->result); 
printk304drivers/scsi/eata_pio.cDBG(DBG_QUEUE, printk("can_queue %d, x %d, y %d\n",sh->can_queue,x,y));
printk320drivers/scsi/eata_pio.cDBG(DBG_QUEUE, printk("eata_pio_queue pid %ld, target: %x, lun: %x, y %d\n",
printk381drivers/scsi/eata_pio.cprintk("eata_pio_queue target %d, pid %ld, HBA busy, returning "
printk393drivers/scsi/eata_pio.cDBG(DBG_QUEUE,printk("Queued base %#.4lx pid: %ld target: %x lun: %x "
printk410drivers/scsi/eata_pio.cDBG(DBG_ABNORM, printk("eata_pio_abort called pid: %ld target: %x lun: %x"
printk418drivers/scsi/eata_pio.cprintk("eata_pio: abort, timeout error.\n");
printk424drivers/scsi/eata_pio.cDBG(DBG_ABNORM, printk("Returning: SCSI_ABORT_NOT_RUNNING\n")); 
printk429drivers/scsi/eata_pio.cDBG(DBG_ABNORM, printk("Returning: SCSI_ABORT_BUSY\n"));
printk435drivers/scsi/eata_pio.cprintk("eata_pio: abort, command reset error.\n");
printk441drivers/scsi/eata_pio.cDBG(DBG_ABNORM, printk("eata_pio: abort, queue slot locked.\n"));
printk459drivers/scsi/eata_pio.cDBG(DBG_ABNORM, printk("eata_pio_reset called pid:%ld target: %x lun: %x "
printk464drivers/scsi/eata_pio.cprintk("eata_pio_reset: exit, already in reset.\n");
printk484drivers/scsi/eata_pio.cprintk("eata_pio_reset: slot %d in reset, pid %ld.\n", x, sp->pid);
printk495drivers/scsi/eata_pio.cDBG(DBG_ABNORM, printk("eata_pio_reset: board reset done.\n"));
printk501drivers/scsi/eata_pio.cDBG(DBG_ABNORM, printk("eata_pio_reset: interrupts disabled, loops %d.\n", limit));
printk514drivers/scsi/eata_pio.cprintk("eata_pio_reset: resetted ccb %d.\n",x);
printk526drivers/scsi/eata_pio.cDBG(DBG_ABNORM, printk("eata_pio_reset: exit, success.\n"));
printk530drivers/scsi/eata_pio.cDBG(DBG_ABNORM, printk("eata_pio_reset: exit, wakeup.\n"));
printk597drivers/scsi/eata_pio.cprintk("Issuing PIO READ CONFIG to HBA at %#x\n", base));
printk612drivers/scsi/eata_pio.cDBG(DBG_PIO&&DBG_PROBE, printk("EATA Controller found at %#4x "
printk628drivers/scsi/eata_pio.cDBG(DBG_PROBE, printk("eata_dma: get_conf_PIO, error during transfer "
printk636drivers/scsi/eata_pio.cprintk("Please check values: (read config data)\n");
printk637drivers/scsi/eata_pio.cprintk("LEN: %d ver:%d OCS:%d TAR:%d TRNXFR:%d MORES:%d\n",
printk640drivers/scsi/eata_pio.cprintk("HAAV:%d SCSIID0:%d ID1:%d ID2:%d QUEUE:%d SG:%d SEC:%d\n",
printk643drivers/scsi/eata_pio.cprintk("IRQ:%d IRQT:%d FORCADR:%d MCH:%d RIDQ:%d\n",
printk656drivers/scsi/eata_pio.cprintk("eata_pio: executing controller self test & setup...\n");
printk668drivers/scsi/eata_pio.cif (buffer[z] != 7) printk("%c", buffer[z]);
printk688drivers/scsi/eata_pio.cprintk("HBA at %#.4lx supports DMA. Please use EATA-DMA driver.\n",base);
printk697drivers/scsi/eata_pio.cprintk("HBA at %#lx didn't react on INQUIRY. Sorry.\n", (ulong) base);
printk703drivers/scsi/eata_pio.cprintk("HBA at %#lx failed while performing self test & setup.\n", 
printk715drivers/scsi/eata_pio.cprintk("Couldn't allocate IRQ %d, Sorry.", gc->IRQ);
printk720drivers/scsi/eata_pio.cprintk("Can't support more than one HBA on this IRQ,\n"
printk855drivers/scsi/eata_pio.cDBG(DBG_PROBE, printk("EISA EATA id tags found: %x %x %x \n",
printk863drivers/scsi/eata_pio.cprintk("eata_dma: No valid IRQ. HBA removed from list\n");
printk879drivers/scsi/eata_pio.cprintk("eata_pio: kernel PCI support not enabled. Skipping scan for PCI HBAs.\n");
printk895drivers/scsi/eata_pio.cprintk("eata_pio: HBA at bus %d, device %d,"
printk908drivers/scsi/eata_pio.cprintk("HBA has IO or BUSMASTER mode disabled\n");
printk912drivers/scsi/eata_pio.cprintk("eata_pio: error %x while reading "
printk915drivers/scsi/eata_pio.cprintk("DEVICECLASSID %x didn't match\n", rev_device);
printk917drivers/scsi/eata_pio.cprintk("eata_pio: error %x while reading PCI_CLASS_BASE\n", 
printk961drivers/scsi/eata_pio.cprintk("eata_pio: error %x while reading "
printk965drivers/scsi/eata_pio.cprintk("eata_pio: No BIOS32 extensions present. This driver release "
printk980drivers/scsi/eata_pio.cprintk("Using lots of delays to let you read the debugging output\n"));
printk997drivers/scsi/eata_pio.cprintk("EATA (Extended Attachment) PIO driver version: %d.%d%s\n"
printk1003drivers/scsi/eata_pio.cprintk("Registered HBAs:\n");
printk1004drivers/scsi/eata_pio.cprintk("HBA no. Boardtype: Revis: EATA: Bus: BaseIO: IRQ: Ch: ID: Pr:"
printk1007drivers/scsi/eata_pio.cprintk("scsi%-2d: %.10s v%s 2.0%c  %s %#.4x   %2d   %d   %d   %c"
printk25drivers/scsi/eata_pio_proc.cDBG(DBG_PROC_WRITE, printk("%s\n", buffer));
printk123drivers/scsi/eata_pio_proc.cDBG(DBG_PROC, printk("2pos: %ld offset: %ld len: %d\n", pos, offset, len));
printk128drivers/scsi/eata_pio_proc.cDBG(DBG_PROC, printk("3pos: %ld offset: %ld len: %d\n", pos, offset, len));
printk433drivers/scsi/fdomain.cprintk( "scsi%d <fdomain>: No BIOS; using scsi id %d\n",
printk436drivers/scsi/fdomain.cprintk( "scsi%d <fdomain>: BIOS version ", shpnt->host_no );
printk438drivers/scsi/fdomain.cif (bios_major >= 0) printk( "%d.", bios_major );
printk439drivers/scsi/fdomain.celse                 printk( "?." );
printk441drivers/scsi/fdomain.cif (bios_minor >= 0) printk( "%d", bios_minor );
printk442drivers/scsi/fdomain.celse                 printk( "?." );
printk444drivers/scsi/fdomain.cprintk( " at 0x%x using scsi id %d\n",
printk452drivers/scsi/fdomain.cprintk( "scsi%d <fdomain>: %s chip at 0x%x irq ",
printk461drivers/scsi/fdomain.cif (interrupt_level) printk( "%d", interrupt_level );
printk462drivers/scsi/fdomain.celse                 printk( "<none>" );
printk464drivers/scsi/fdomain.cprintk( "\n" );
printk470drivers/scsi/fdomain.cprintk( "fdomain: usage: fdomain=<PORT_BASE>,<IRQ>[,<ADAPTER_ID>]\n" );
printk471drivers/scsi/fdomain.cprintk( "fdomain: bad LILO parameters?\n" );
printk502drivers/scsi/fdomain.cprintk( " (%x%x),",
printk585drivers/scsi/fdomain.cprintk( " Options = %x\n", options );
printk632drivers/scsi/fdomain.cprintk( " %x,", base );
printk651drivers/scsi/fdomain.cprintk( " RAM FAILED, " );
printk668drivers/scsi/fdomain.cprintk( " (%x inuse),", base );
printk673drivers/scsi/fdomain.cprintk( " %x,", base );
printk704drivers/scsi/fdomain.cprintk( " (%x inuse)," , i );
printk755drivers/scsi/fdomain.cprintk( "\nINFO: cat /proc/pci to see list of PCI devices from bios32\n" );
printk756drivers/scsi/fdomain.cprintk( "\nTMC-3260 detect:"
printk801drivers/scsi/fdomain.cprintk( "Future Domain 36C70 : at PCI bus %u, device %u, function %u\n",
printk818drivers/scsi/fdomain.cprintk ( "PCI ERROR: Future Domain 36C70 not initializing"
printk823drivers/scsi/fdomain.cprintk( "TMC-3260 PCI: IRQ = %u, I/O base = 0x%lx\n", 
printk840drivers/scsi/fdomain.cprintk( "TMC-3260 fix: Masking I/O base address with 0xff00.\n" ); 
printk841drivers/scsi/fdomain.cprintk( "TMC-3260: IRQ = %d, I/O base = 0x%x\n", *irq, *iobase );
printk867drivers/scsi/fdomain.cprintk( "fdomain_16x0_detect()," );
printk873drivers/scsi/fdomain.cprintk( "no BIOS, using port_base = 0x%x, irq = %d\n",
printk877drivers/scsi/fdomain.cprintk( "fdomain: cannot locate chip at port base 0x%x\n",
printk879drivers/scsi/fdomain.cprintk( "fdomain: bad LILO parameters?\n" );
printk887drivers/scsi/fdomain.cprintk( " %x(%x),", (unsigned)addresses[i], (unsigned)bios_base );
printk903drivers/scsi/fdomain.cprintk( " FAILED: NO BIOS\n" );
printk920drivers/scsi/fdomain.cprintk( " FAILED: NO PORT\n" );
printk923drivers/scsi/fdomain.cprintk( "\nTMC-3260 36C70 PCI scsi chip detection failed.\n" );
printk924drivers/scsi/fdomain.cprintk( "Send mail to mckinley@msupa.pa.msu.edu.\n" );
printk948drivers/scsi/fdomain.cprintk( "fdomain: LOOPBACK TEST FAILED, FAILING DETECT!\n" );
printk951drivers/scsi/fdomain.cprintk( "fdomain: loopback test failed at port base 0x%x\n",
printk953drivers/scsi/fdomain.cprintk( "fdomain: bad LILO parameters?\n" );
printk988drivers/scsi/fdomain.cprintk( "fdomain: IRQ %d is bad!\n", interrupt_level );
printk989drivers/scsi/fdomain.cprintk( "         This shouldn't happen!\n" );
printk990drivers/scsi/fdomain.cprintk( "         Send mail to faith@cs.unc.edu\n" );
printk992drivers/scsi/fdomain.cprintk( "fdomain: IRQ %d is already in use!\n", interrupt_level );
printk993drivers/scsi/fdomain.cprintk( "         Please use another IRQ!\n" );
printk995drivers/scsi/fdomain.cprintk( "fdomain: Error getting IRQ %d\n", interrupt_level );
printk996drivers/scsi/fdomain.cprintk( "         This shouldn't happen!\n" );
printk997drivers/scsi/fdomain.cprintk( "         Send mail to faith@cs.unc.edu\n" );
printk1020drivers/scsi/fdomain.cprintk( "fdomain: detection routine scanning for devices:\n" );
printk1031drivers/scsi/fdomain.cprintk( "     SCSI ID %d: ", i );
printk1033drivers/scsi/fdomain.cprintk( "%c", buf[j] >= 20 ? buf[j] : ' ' );
printk1044drivers/scsi/fdomain.cprintk( "%lu MB (%lu byte blocks)",
printk1050drivers/scsi/fdomain.cprintk ("\n" );
printk1129drivers/scsi/fdomain.cprintk( "fdomain_arbitrate()\n" );
printk1147drivers/scsi/fdomain.cprintk( "Arbitration failed, status = %x\n", status );
printk1150drivers/scsi/fdomain.cprintk( "fdomain: Arbitration failed, status = %x\n", status );
printk1183drivers/scsi/fdomain.cif (!target) printk( "Selection failed\n" );
printk1190drivers/scsi/fdomain.cprintk( "fdomain: Selection failed\n" );
printk1233drivers/scsi/fdomain.cprintk( "Spurious interrupt, in_command = %d, current_SC = %x\n",
printk1242drivers/scsi/fdomain.cprintk( "Interrupt after abort, ignoring\n" );
printk1256drivers/scsi/fdomain.cprintk( " AFAIL " );
printk1280drivers/scsi/fdomain.cprintk( " SFAIL " );
printk1286drivers/scsi/fdomain.cprintk( " AltSel " );
printk1313drivers/scsi/fdomain.cprintk( "CMD = %x,",
printk1332drivers/scsi/fdomain.cprintk( "Status = %x, ", current_SC->SCp.Status );
printk1336drivers/scsi/fdomain.cprintk( "fdomain: target = %d, command = %x, status = %x\n",
printk1349drivers/scsi/fdomain.cprintk( "Message = %x, ", current_SC->SCp.Message );
printk1354drivers/scsi/fdomain.cprintk( "fdomain: message = %x\n", current_SC->SCp.Message );
printk1528drivers/scsi/fdomain.cprintk( "DC=%d, ", data_count ) ;
printk1534drivers/scsi/fdomain.cprintk( "%d OUT, ", data_count );
printk1561drivers/scsi/fdomain.cprintk( "DC=%d, ", data_count );
printk1567drivers/scsi/fdomain.cprintk( "%d IN, ", data_count );
printk1591drivers/scsi/fdomain.cprintk( " ** IN DONE %d ** ", current_SC->SCp.have_data_in );
printk1615drivers/scsi/fdomain.cprintk( "fdomain: REQUEST SENSE "
printk1622drivers/scsi/fdomain.cprintk( "BEFORE MY_DONE. . ." );
printk1627drivers/scsi/fdomain.cprintk( "RETURNING.\n" );
printk1650drivers/scsi/fdomain.cprintk( "queue: target = %d cmnd = 0x%02x pieces = %d size = %u\n",
printk1727drivers/scsi/fdomain.cprintk( "fdomain: cannot provide detailed information\n" );
printk1730drivers/scsi/fdomain.cprintk( "%s\n", fdomain_16x0_info( SCpnt->host ) );
printk1733drivers/scsi/fdomain.ccase in_arbitration: printk( "arbitration " ); break;
printk1734drivers/scsi/fdomain.ccase in_selection:   printk( "selection " );   break;
printk1735drivers/scsi/fdomain.ccase in_other:       printk( "other " );       break;
printk1736drivers/scsi/fdomain.cdefault:             printk( "unknown " );     break;
printk1739drivers/scsi/fdomain.cprintk( "(%d), target = %d cmnd = 0x%02x pieces = %d size = %u\n",
printk1745drivers/scsi/fdomain.cprintk( "sent_command = %d, have_data_in = %d, timeout = %d\n",
printk1750drivers/scsi/fdomain.cprintk( "in_interrupt_flag = %d\n", in_interrupt_flag );
printk1764drivers/scsi/fdomain.cprintk( "IMR = 0x%04x", imr );
printk1766drivers/scsi/fdomain.cprintk( " (masked)" );
printk1767drivers/scsi/fdomain.cprintk( ", IRR = 0x%04x, ISR = 0x%04x\n", irr, isr );
printk1769drivers/scsi/fdomain.cprintk( "SCSI Status      = 0x%02x\n", inb( SCSI_Status_port ) );
printk1770drivers/scsi/fdomain.cprintk( "TMC Status       = 0x%02x", inb( TMC_Status_port ) );
printk1772drivers/scsi/fdomain.cprintk( " (interrupt)" );
printk1773drivers/scsi/fdomain.cprintk( "\n" );
printk1774drivers/scsi/fdomain.cprintk( "Interrupt Status = 0x%02x", inb( Interrupt_Status_port ) );
printk1776drivers/scsi/fdomain.cprintk( " (enabled)" );
printk1777drivers/scsi/fdomain.cprintk( "\n" );
printk1779drivers/scsi/fdomain.cprintk( "FIFO Status      = 0x%02x\n", inb( port_base + FIFO_Status ) );
printk1780drivers/scsi/fdomain.cprintk( "Int. Condition   = 0x%02x\n",
printk1783drivers/scsi/fdomain.cprintk( "Configuration 1  = 0x%02x\n", inb( port_base + Configuration1 ) );
printk1785drivers/scsi/fdomain.cprintk( "Configuration 2  = 0x%02x\n",
printk1793drivers/scsi/fdomain.cprintk( "fdomain: abort " );
printk1800drivers/scsi/fdomain.cprintk( " (not in command)\n" );
printk1804drivers/scsi/fdomain.c} else printk( "\n" );
printk1831drivers/scsi/fdomain.cif (SCpnt) printk( "fdomain: SCSI Bus Reset\n" );
printk103drivers/scsi/g_NCR5380.cprintk("generic_NCR5380_setup : usage ncr5380=port,irq,dma\n");
printk148drivers/scsi/g_NCR5380.cprintk("scsi%d : IRQ%d not free, interrupts disabled\n", 
printk154drivers/scsi/g_NCR5380.cprintk("scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk155drivers/scsi/g_NCR5380.cprintk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
printk158drivers/scsi/g_NCR5380.cprintk("scsi%d : at port %d", instance->host_no, instance->io_port);
printk160drivers/scsi/g_NCR5380.cprintk (" interrupts disabled");
printk162drivers/scsi/g_NCR5380.cprintk (" irq %d", instance->irq);
printk163drivers/scsi/g_NCR5380.cprintk(" options CAN_QUEUE=%d  CMD_PER_LUN=%d release=%d",
printk166drivers/scsi/g_NCR5380.cprintk("\n");
printk298drivers/scsi/hosts.cprintk("Register %x %x: %d\n", (int)retval, (int)retval->hostt, j);
printk378drivers/scsi/hosts.cprintk ("scsi%d : %s\n", /* And print a little message */
printk382drivers/scsi/hosts.cprintk ("scsi : %d host%s.\n", next_scsi_host,
printk147drivers/scsi/in2000.cprintk("IN-2000 probe got dip setting of %02X\n", tmp);
printk153drivers/scsi/in2000.cprintk("IN-2000 probe found hdw. vers. %02x, BIOS at %06x\n",
printk157drivers/scsi/in2000.cprintk("in2000 BIOS not found.\n");
printk238drivers/scsi/in2000.cDEB(printk("FIir:%d %02x %08x\n", in2000_datalen,fic,(unsigned int )in2000_dataptr));
printk241drivers/scsi/in2000.cDEB(printk("FIr:%d %02x %08x %08x\n", in2000_datalen,fic,count2,(unsigned int)in2000_dataptr));
printk267drivers/scsi/in2000.cDEB(printk("FIer:%d %02x %08x\n", in2000_datalen,fic,(unsigned int )in2000_dataptr));
printk288drivers/scsi/in2000.cDEB(printk("INT:%d %02x %08x\n", in2000_datalen, inb(INFCNT),(unsigned int)in2000_dataptr));
printk300drivers/scsi/in2000.cDEB(printk("(int2000:%02x %02x %02x %02x %02x)\n",count,auxstatus,
printk307drivers/scsi/in2000.cprintk("int2000: dataptr=NULL datalen=%d\n",
printk450drivers/scsi/in2000.cprintk("in2000qcmd: pos %d len %d ", i, bufflen);
printk451drivers/scsi/in2000.cprintk("scsi cmd:");
printk452drivers/scsi/in2000.cfor (i = 0; i < SCpnt->cmd_len; i++) printk("%02x ", cmd[i]);
printk453drivers/scsi/in2000.cprintk("\n");
printk473drivers/scsi/in2000.cprintk("in2000_queue_command waiting for free command block!\n");
printk496drivers/scsi/in2000.cprintk("in2000_queue_command timeout!\n");
printk590drivers/scsi/in2000.cDEB(printk("in2000_detect: \n"));
printk608drivers/scsi/in2000.cprintk("The IN-2000 is not configured for interrupt operation\n");
printk609drivers/scsi/in2000.cprintk("Change the DIP switch settings to enable interrupt operation\n");
printk613drivers/scsi/in2000.cprintk("IN-2000 probe found floppy controller on IN-2000 ");
printk615drivers/scsi/in2000.cprintk("enabled\n");
printk617drivers/scsi/in2000.cprintk("disabled\n");
printk620drivers/scsi/in2000.cprintk("IN-2000 probe found IN-2000 in ");
printk622drivers/scsi/in2000.cprintk("synchronous mode\n");
printk624drivers/scsi/in2000.cprintk("asynchronous mode\n");
printk628drivers/scsi/in2000.cprintk("Configuring IN2000 at IO:%x, IRQ %d"
printk637drivers/scsi/in2000.cprintk("in2000_detect: Unable to allocate IRQ.\n");
printk658drivers/scsi/in2000.cDEB(printk("in2000_abort\n"));
printk675drivers/scsi/in2000.cDEB(printk("in2000_reset called\n"));
printk698drivers/scsi/in2000.cDEB(printk("in2000_biosparam\n"));
printk236drivers/scsi/pas16.cprintk( "pas16: WARNING: Can't use same irq as sound "
printk325drivers/scsi/pas16.cprintk("pas16_setup : usage pas16=io_port,irq\n");
printk373drivers/scsi/pas16.cprintk("scsi-pas16 : probing io_port %04x\n", (unsigned int) bases[current_base].io_port);
printk380drivers/scsi/pas16.cprintk("scsi-pas16 : detected board.\n");
printk387drivers/scsi/pas16.cprintk("scsi-pas16 : io_port = %04x\n", (unsigned int) io_port);
printk405drivers/scsi/pas16.cprintk("scsi%d : IRQ%d not free, interrupts disabled\n", 
printk411drivers/scsi/pas16.cprintk("scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk412drivers/scsi/pas16.cprintk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
printk419drivers/scsi/pas16.cprintk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
printk422drivers/scsi/pas16.cprintk("scsi%d : at 0x%04x", instance->host_no, (int) 
printk425drivers/scsi/pas16.cprintk (" interrupts disabled");
printk427drivers/scsi/pas16.cprintk (" irq %d", instance->irq);
printk428drivers/scsi/pas16.cprintk(" options CAN_QUEUE=%d  CMD_PER_LUN=%d release=%d",
printk431drivers/scsi/pas16.cprintk("\n");
printk502drivers/scsi/pas16.cprintk("scsi%d : watchdog timer fired in NCR5380_pread()\n",
printk534drivers/scsi/pas16.cprintk("scsi%d : watchdog timer fired in NCR5380_pwrite()\n",
printk170drivers/scsi/pas16.h(((unsigned char) printk("scsi%d : read register %d at io_port %04x\n"\
printk174drivers/scsi/pas16.h(printk("scsi%d : write %02x to register %d at io_port %04x\n",   \
printk358drivers/scsi/qlogic.cprintk("Ql:Bad Interrupt status:%02x\n", i);
printk368drivers/scsi/qlogic.cprintk("Ql:Bad sequence for command %d, int %02X, cmdleft = %d\n", j, i, inb( qbase+7 ) & 0x1f );
printk427drivers/scsi/qlogic.cprintk("Ql:Error during status phase, int=%02X, %d bytes recd\n", i, j);
printk566drivers/scsi/qlogic.cprintk( "Ql: Using preset base address of %03x\n", qbase );
printk610drivers/scsi/qlogic.cprintk( "Ql: Using preset IRQ %d\n", qlirq );
printk323drivers/scsi/scsi.cprintk("scsi%d : added to blocked host list.\n",
printk328drivers/scsi/scsi.cprintk("scsi%d : added to blocked host list.\n",
printk339drivers/scsi/scsi.cprintk ("scan_scsis_done(%p, %06x)\n", SCpnt->host, SCpnt->result);
printk355drivers/scsi/scsi.cprintk("scsi_luns_setup : usage max_scsi_luns=n (n should be between 1 and 8)\n");
printk387drivers/scsi/scsi.cprintk ("Unable to obtain scsi_result buffer\n");
printk537drivers/scsi/scsi.cprintk ("scsi: scan_scsis_single id %d lun %d. Return code 0x%08x\n",
printk540drivers/scsi/scsi.cprintk("\n");
printk556drivers/scsi/scsi.cprintk ("scsi: performing INQUIRY\n");
printk579drivers/scsi/scsi.cprintk ("scsi: INQUIRY %s with code 0x%x\n",
printk640drivers/scsi/scsi.cprintk ("scsi: unknown type %d\n", type);
printk698drivers/scsi/scsi.cprintk ("Unlocked floptical drive.\n");
printk727drivers/scsi/scsi.cprintk ("scsi: scan_scsis_single: Cannot malloc\n");
printk790drivers/scsi/scsi.cprintk("SCSI host %d abort() timed out - resetting\n",
printk800drivers/scsi/scsi.cprintk("Unable to reset scsi host %d - ", SCpnt->host->host_no);
printk801drivers/scsi/scsi.cprintk("probably a SCSI bus hang.\n");
printk1021drivers/scsi/scsi.cprintk("Attempt to allocate device channel %d, target %d, "
printk1121drivers/scsi/scsi.cprintk("internal_cmnd (host = %d, channel = %d, target = %d, "
printk1130drivers/scsi/scsi.cprintk("queuecommand : routine at %p\n",
printk1154drivers/scsi/scsi.cprintk("command() :  routine at %p\n", host->hostt->command);
printk1161drivers/scsi/scsi.cprintk("done(host = %d, result = %04x) : routine at %p\n", 
printk1167drivers/scsi/scsi.cprintk("leaving internal_cmnd()\n");
printk1215drivers/scsi/scsi.cprintk ("scsi_do_cmd (host = %d, channel = %d target = %d, "
printk1221drivers/scsi/scsi.cprintk ("%02x  ", ((unsigned char *) cmnd)[i]);
printk1222drivers/scsi/scsi.cprintk("\n");
printk1296drivers/scsi/scsi.cprintk ("Leaving scsi_do_cmd()\n");
printk1316drivers/scsi/scsi.cprintk("scsi%d, channel%d : ", SCpnt->host->host_no, SCpnt->channel);
printk1318drivers/scsi/scsi.cprintk("\n");
printk1395drivers/scsi/scsi.cif(result) printk("Non-zero result in scsi_done %x %d:%d\n",
printk1413drivers/scsi/scsi.cprintk("In scsi_done(host = %d, result = %06x)\n", host->host_no, result);
printk1433drivers/scsi/scsi.cprintk("scsi%d : channel %d target %d lun %d request sense"
printk1455drivers/scsi/scsi.cprintk ("In scsi_done, GOOD status, COMMAND COMPLETE, parsing sense information.\n");
printk1465drivers/scsi/scsi.cprintk("NO SENSE.  status = REDO\n");
printk1475drivers/scsi/scsi.cprintk("SENSE SUGGEST REMAP or SUGGEST RETRY - status = MAYREDO\n");
printk1482drivers/scsi/scsi.cprintk("SENSE SUGGEST ABORT - status = FINISHED");
printk1488drivers/scsi/scsi.cprintk ("Internal error %s %d \n", __FILE__,
printk1495drivers/scsi/scsi.cprintk("COMMAND COMPLETE message returned, status = FINISHED. \n");
printk1536drivers/scsi/scsi.cprintk("scsi%d, channel %d : RESERVATION CONFLICT performing"
printk1546drivers/scsi/scsi.cprintk ("Internal error %s %d \n"
printk1559drivers/scsi/scsi.cprintk("Host returned DID_TIME_OUT - ");
printk1565drivers/scsi/scsi.cprintk("Aborting\n");
printk1579drivers/scsi/scsi.cprintk ("Retrying.\n");
printk1592drivers/scsi/scsi.cprintk("Couldn't connect.\n");
printk1649drivers/scsi/scsi.cprintk("In MAYREDO, allowing %d retries, have %d\n",
printk1658drivers/scsi/scsi.cprintk("scsi%d channel %d : resetting for second half of retries.\n",
printk1694drivers/scsi/scsi.cprintk("Calling done function - at address %p\n", SCpnt->done);
printk1776drivers/scsi/scsi.cprintk("Stale command on %d %d:%d appears to have died when"
printk1787drivers/scsi/scsi.cprintk("scsi : aborting command due to timeout : pid %lu, scsi%d,"
printk1876drivers/scsi/scsi.cprintk("SCSI bus is being reset for host %d.\n",
printk1963drivers/scsi/scsi.cprintk("scsi reset function returned %d\n", temp);
printk2175drivers/scsi/scsi.cprintk("SMalloc: %d %p\n",len, dma_malloc_pages[i] + (j << 9));
printk2191drivers/scsi/scsi.cprintk("scsi_free %p %d\n",obj, len);
printk2338drivers/scsi/scsi.cprintk("scsi : detected ");
printk2341drivers/scsi/scsi.cprintk("%d SCSI %s%s ", sdtpnt->dev_noticed, sdtpnt->name,
printk2343drivers/scsi/scsi.cprintk("total.\n");
printk2378drivers/scsi/scsi.cprintk("  Vendor: ");
printk2382drivers/scsi/scsi.cprintk("%c", data[i]);
printk2384drivers/scsi/scsi.cprintk(" ");
printk2387drivers/scsi/scsi.cprintk("  Model: ");
printk2391drivers/scsi/scsi.cprintk("%c", data[i]);
printk2393drivers/scsi/scsi.cprintk(" ");
printk2396drivers/scsi/scsi.cprintk("  Rev: ");
printk2400drivers/scsi/scsi.cprintk("%c", data[i]);
printk2402drivers/scsi/scsi.cprintk(" ");
printk2405drivers/scsi/scsi.cprintk("\n");
printk2409drivers/scsi/scsi.cprintk("  Type:   %s ",
printk2411drivers/scsi/scsi.cprintk("                 ANSI SCSI revision: %02x", data[2] & 0x07);
printk2413drivers/scsi/scsi.cprintk(" CCS\n");
printk2415drivers/scsi/scsi.cprintk("\n");
printk2493drivers/scsi/scsi.cprintk("scsi singledevice %d %d %d %d\n", parameter[0], parameter[1],
printk2665drivers/scsi/scsi.cprintk("Failure to register low-level scsi driver");
printk2689drivers/scsi/scsi.cprintk ("scsi%d : %s\n", /* And print a little message */
printk2693drivers/scsi/scsi.cprintk ("scsi : %d host%s.\n", next_scsi_host,
printk2731drivers/scsi/scsi.cprintk ("SCSI memory: total %ldKb, used %ldKb, free %ldKb.\n",
printk2774drivers/scsi/scsi.cprintk("Device busy???\n");
printk2790drivers/scsi/scsi.cprintk("Attached usage count = %d\n", sdpnt->attached);
printk2864drivers/scsi/scsi.cprintk ("scsi : %d host%s.\n", next_scsi_host,
printk2868drivers/scsi/scsi.cprintk ("SCSI memory: total %ldKb, used %ldKb, free %ldKb.\n",
printk3060drivers/scsi/scsi.cprintk("Dump of scsi parameters:\n");
printk3066drivers/scsi/scsi.cprintk("(%d) %d:%d:%d:%d (%s %ld %ld %ld %d) (%d %d %x) (%d %d %d) %x %x %x\n",
printk3086drivers/scsi/scsi.cprintk("wait_for_request = %p\n", wait_for_request);
printk3088drivers/scsi/scsi.cprintk("Dump of pending block device requests\n");
printk3093drivers/scsi/scsi.cprintk("%d: ", i);
printk3096drivers/scsi/scsi.cprintk("(%s %d %ld %ld %ld) ",
printk3104drivers/scsi/scsi.cprintk("\n");
printk466drivers/scsi/scsi.hprintk(DEVICE_NAME " I/O error: dev %s, sector %lu\n",
printk483drivers/scsi/scsi.hprintk("end_scsi_request: buffer-list destroyed\n");
printk85drivers/scsi/scsi_debug.cif (bufflen != 1024) {printk("%d", bufflen); panic("(1)Bad bufflen");};         \
printk91drivers/scsi/scsi_debug.c{   printk("Wrong bh block# %d %d ",bh->b_blocknr, block);  \
printk99drivers/scsi/scsi_debug.cif (bufflen != 1024 && (!SCpnt->use_sg)) {printk("%x %d\n ",bufflen, SCpnt->use_sg); panic("Bad bufflen");};    \
printk109drivers/scsi/scsi_debug.c{   printk("Wrong bh block# %d %d ",SCpnt->request.bh->b_blocknr, block);  \
printk138drivers/scsi/scsi_debug.cprintk("use_sg: %d",SCpnt->use_sg);
printk143drivers/scsi/scsi_debug.cprintk(":%x %x %d\n",sgpnt[i].alt_address, sgpnt[i].address, sgpnt[i].length);
printk144drivers/scsi/scsi_debug.cif (lpnt) printk(" (Alt %x) ",lpnt[15]);
printk147drivers/scsi/scsi_debug.cprintk("nosg: %x %x %d\n",SCpnt->request.buffer, SCpnt->buffer,
printk150drivers/scsi/scsi_debug.cif (lpnt) printk(" (Alt %x) ",lpnt[15]);
printk154drivers/scsi/scsi_debug.cif ((i & 7) == 0) printk("\n");
printk155drivers/scsi/scsi_debug.cprintk("%x ",*lpnt++);
printk157drivers/scsi/scsi_debug.cprintk("\n");
printk161drivers/scsi/scsi_debug.cif ((i & 7) == 0) printk("\n");
printk162drivers/scsi/scsi_debug.cprintk("%x ",*lpnt++);
printk165drivers/scsi/scsi_debug.cprintk("\n");
printk168drivers/scsi/scsi_debug.cif ((i & 7) == 0) printk("\n");
printk169drivers/scsi/scsi_debug.cprintk("%x ",*lpnt++);
printk171drivers/scsi/scsi_debug.cprintk("\n");
printk173drivers/scsi/scsi_debug.cprintk("DMA free %d sectors.\n", dma_free_sectors);
printk214drivers/scsi/scsi_debug.cprintk("Request sense...\n");
printk218drivers/scsi/scsi_debug.cprintk("scsi_debug: Requesting sense buffer (%x %x %x %d):", SCpnt, buff, done, bufflen);
printk219drivers/scsi/scsi_debug.cfor(i=0;i<12;i++) printk("%d ",sense_buffer[i]);
printk220drivers/scsi/scsi_debug.cprintk("\n");
printk230drivers/scsi/scsi_debug.cif(cmd[4]) printk("Medium removal inhibited...");
printk231drivers/scsi/scsi_debug.celse printk("Medium removal enabled...");
printk235drivers/scsi/scsi_debug.cprintk("Inquiry...(%x %d)\n", buff, bufflen);
printk247drivers/scsi/scsi_debug.cprintk("Test unit ready(%x %d)\n", buff, bufflen);
printk253drivers/scsi/scsi_debug.cprintk("Read Capacity\n");
printk266drivers/scsi/scsi_debug.cprintk("Read...");
printk286drivers/scsi/scsi_debug.cprintk("(r%d)",SCpnt->request.nr_sectors);
printk321drivers/scsi/scsi_debug.cif (SCpnt->use_sg) printk("Block %x (%d %d)\n",block, SCpnt->request.nr_sectors,
printk337drivers/scsi/scsi_debug.cprintk("scsi_debug: Filling sense buffer:");
printk338drivers/scsi/scsi_debug.cfor(i=0;i<12;i++) printk("%d ",sense_buffer[i]);
printk339drivers/scsi/scsi_debug.cprintk("\n");
printk379drivers/scsi/scsi_debug.cprintk("Write\n");
printk395drivers/scsi/scsi_debug.cprintk("%x %x :",block,  *((unsigned long *) (buff+60)));
printk403drivers/scsi/scsi_debug.cprintk("Unknown command %d\n",*cmd);
printk421drivers/scsi/scsi_debug.cDEB(printk("scsi_debug_queuecommand: now waiting for interrupt "););
printk423drivers/scsi/scsi_debug.cprintk("scsi_debug_queuecommand: Two concurrent queuecommand?\n");
printk428drivers/scsi/scsi_debug.cprintk("scsi_debug_queuecommand: done cant be NULL\n");
printk450drivers/scsi/scsi_debug.cprintk("Sending command (%d %x %d %d)...", i, done, timeout[i],jiffies);
printk467drivers/scsi/scsi_debug.cDEB(printk("scsi_debug_command: ..calling scsi_debug_queuecommand\n"));
printk537drivers/scsi/scsi_debug.cprintk("scsi_debug_intr_handle: Unexpected interrupt\n"); 
printk542drivers/scsi/scsi_debug.cprintk("In intr_handle...");
printk543drivers/scsi/scsi_debug.cprintk("...done %d %x %d %d\n",i , my_done, to, jiffies);
printk544drivers/scsi/scsi_debug.cprintk("In intr_handle: %d %x %x\n",i, SCtmp, my_done);
printk549drivers/scsi/scsi_debug.cprintk("Called done.\n");
printk572drivers/scsi/scsi_debug.cDEB(printk("scsi_debug_abort\n"));
printk606drivers/scsi/scsi_debug.cprintk("Bus unlocked by reset(%d)\n", SCpnt->host->suggest_bus_reset);
printk608drivers/scsi/scsi_debug.cDEB(printk("scsi_debug_reset called\n"));
printk662drivers/scsi/scsi_debug.cprintk("Unknown command:%s\n", buffer);
printk664drivers/scsi/scsi_debug.cprintk("Wrong Signature:%10s\n", (char *) ((ulong)buffer-11));
printk123drivers/scsi/scsi_ioctl.celse printk("SCSI device (ioctl) reports ILLEGAL REQUEST.\n");
printk127drivers/scsi/scsi_ioctl.cprintk("Device not ready.  Make sure there is a disc in the drive.\n");
printk134drivers/scsi/scsi_ioctl.cprintk("Disc change detected.\n");
printk138drivers/scsi/scsi_ioctl.cprintk("SCSI error: host %d id %d lun %d return code = %x\n",
printk143drivers/scsi/scsi_ioctl.cprintk("\tSense class %x, sense error %x, extended sense %x\n",
printk280drivers/scsi/scsi_ioctl.cprintk("scsi_ioctl : device %d.  command = ", dev->id);
printk282drivers/scsi/scsi_ioctl.cprintk("%02x ", cmd[i]);
printk283drivers/scsi/scsi_ioctl.cprintk("\nbuffer =");
printk285drivers/scsi/scsi_ioctl.cprintk("%02x ", buf[i]);
printk286drivers/scsi/scsi_ioctl.cprintk("\n");
printk287drivers/scsi/scsi_ioctl.cprintk("inlen = %d, outlen = %d, cmdlen = %d\n",
printk289drivers/scsi/scsi_ioctl.cprintk("buffer = %d, cmd_in = %d\n", buffer, cmd_in);
printk57drivers/scsi/scsicam.cprintk ("scsicam_bios_param : trying existing mapping\n");
printk65drivers/scsi/scsicam.cprintk ("scsicam_bios_param : trying optimal mapping\n");
printk99drivers/scsi/scsicam.cprintk ("scsicam_bios_param : partition %d has system \n",
printk116drivers/scsi/scsicam.cprintk ("scsicam_bios_param : end at h = %d, c = %d, s = %d\n",
printk133drivers/scsi/scsicam.cprintk("scsicam_bios_param : logical_end=%d physical_end=%d ext_physical_end=%d ext_cyl=%d\n"
printk146drivers/scsi/scsicam.cprintk ("scsicam_bios_param : logical (%u) != physical (%u)\n",
printk222drivers/scsi/sd.cprintk("sd%c : rw_intr(%d, %d)\n", 'a' + MINOR(SCpnt->request.rq_dev), 
printk235drivers/scsi/sd.cprintk("sd%c : %d sectors remain.\n", 'a' + MINOR(SCpnt->request.rq_dev),
printk237drivers/scsi/sd.cprintk("use_sg is %d\n ",SCpnt->use_sg);
printk245drivers/scsi/sd.cprintk(":%x %x %d\n",sgpnt[i].alt_address, sgpnt[i].address, 
printk261drivers/scsi/sd.cprintk("nosg: %x %x %d\n",SCpnt->request.buffer, SCpnt->buffer,
printk282drivers/scsi/sd.cprintk("sd%c : handling page request, no buffer\n",
printk305drivers/scsi/sd.cprintk("err: %x %x %d\n",SCpnt->request.buffer, SCpnt->buffer,
printk315drivers/scsi/sd.cprintk("nosgerr: %x %x %d\n",SCpnt->request.buffer, SCpnt->buffer,
printk386drivers/scsi/sd.cprintk("SCSI disk error : host %d channel %d id %d lun %d return code = %x\n",
printk529drivers/scsi/sd.cprintk("Doing sd request, dev = %d, block = %d\n", devm, block);
printk554drivers/scsi/sd.cprintk("sd%c : real dev = /dev/sd%c, block = %d\n", 
printk571drivers/scsi/sd.cprintk("sd.c:Bad block number requested");
printk644drivers/scsi/sd.cprintk("Warning: SCSI DMA buffer space running low.  Using non scatter-gather I/O.\n");
printk689drivers/scsi/sd.cprintk("Warning - running *really* short on DMA buffers\n");
printk730drivers/scsi/sd.cprintk("Warning: Running low on SCSI DMA buffers");
printk791drivers/scsi/sd.cprintk("Use sg, count %d %x %d\n", 
printk793drivers/scsi/sd.cprintk("maxsg = %x, counted = %d this_count = %d\n", 
printk796drivers/scsi/sd.cprintk("[%p %lx] ", bh->b_data, bh->b_size);
printk801drivers/scsi/sd.cprintk("{%d:%p %p %d}  ", count,
printk835drivers/scsi/sd.cprintk("sd%c : %s %d/%d 512 byte blocks.\n", 
printk907drivers/scsi/sd.cprintk("SCSI disk request error: invalid device.\n");
printk1008drivers/scsi/sd.cprintk( "sd%c: Spinning up disk...", 'a' + i );
printk1035drivers/scsi/sd.cprintk( "." );
printk1040drivers/scsi/sd.cprintk( "not responding...\n" );
printk1042drivers/scsi/sd.cprintk( "ready\n" );
printk1096drivers/scsi/sd.cprintk ("sd%c : READ CAPACITY failed.\n"
printk1105drivers/scsi/sd.cprintk("sd%c : extended sense code = %1x \n", 
printk1108drivers/scsi/sd.cprintk("sd%c : sense not available. \n", 'a' + i);
printk1110drivers/scsi/sd.cprintk("sd%c : block size assumed to be 512 bytes, disk size 1GB.  \n",
printk1139drivers/scsi/sd.cprintk("sd%c : sector size 0 reported, assuming 512.\n", 'a' + i);
printk1147drivers/scsi/sd.cprintk ("sd%c : unsupported sector size %d.\n",
printk1152drivers/scsi/sd.cprintk ("scsi : deleting disk entry.\n");
printk1170drivers/scsi/sd.cprintk ("SCSI Hardware sector size is %d bytes on device sd%c\n",
printk1220drivers/scsi/sd.cprintk ("sd%c: test WP failed, assume Write Protected\n",i+'a');
printk1224drivers/scsi/sd.cprintk ("sd%c: Write Protect is %s\n",i+'a',
printk1251drivers/scsi/sd.cprintk("Unable to get major %d for SCSI disk\n",MAJOR_NR);
printk1333drivers/scsi/sd.cprintk("Detected scsi disk sd%c at scsi%d, channel %d, id %d, lun %d\n", 
printk1392drivers/scsi/sd.cprintk("Device busy for revalidation (usage=%d)\n", USAGE);
printk1508drivers/scsi/sd.cprintk("sd_gendisk not in disk chain.\n");
printk267drivers/scsi/seagate.cprintk("scsi%d : borken calibrated to %dK/sec, %d cycles per transfer\n", 
printk278drivers/scsi/seagate.cprintk("scsi%d : borken timeout\n", hostno);
printk296drivers/scsi/seagate.cprintk("Autodetecting ST0x / TMC-8xx\n");
printk301drivers/scsi/seagate.cprintk ("ERROR : seagate_st0x_detect() called twice.\n");
printk319drivers/scsi/seagate.cprintk("Base address overridden to %x, controller type is %s\n",
printk352drivers/scsi/seagate.cprintk("%s detected. Base address = %x, cr = %x, dr = %x\n", tpnt->name, base_address, st0x_cr_sr, st0x_dr);
printk362drivers/scsi/seagate.cprintk("scsi%d : unable to allocate IRQ%d\n",
printk372drivers/scsi/seagate.cprintk("%s options:"
printk395drivers/scsi/seagate.cprintk("ST0x / TMC-8xx not detected.\n");
printk504drivers/scsi/seagate.cprintk("scsi%d : seagate_reconnect_intr() called\n", hostno);
printk508drivers/scsi/seagate.cprintk("scsi%d: unexpected interrupt.\n", hostno);
printk513drivers/scsi/seagate.cprintk("scsi%d : internal_command("
printk525drivers/scsi/seagate.cprintk("scsi%d : done_fn(%d,%08x)", hostno, 
printk534drivers/scsi/seagate.cprintk("done_fn() not defined.\n");
printk577drivers/scsi/seagate.cprintk("scsi%d : using linked commands, current I_T_L nexus is ",
printk583drivers/scsi/seagate.cprintk("correct\n");
printk588drivers/scsi/seagate.cprintk("incorrect\n");
printk660drivers/scsi/seagate.cprintk ("scsi%d : target = %d, command = ", hostno, target);
printk662drivers/scsi/seagate.cprintk("\n");
printk668drivers/scsi/seagate.cprintk("scsi%d : reconnecting\n", hostno);
printk672drivers/scsi/seagate.cprintk("scsi%d : connected, can reconnect\n", hostno);
printk675drivers/scsi/seagate.cprintk("scsi%d : connected to wrong target, can reconnect\n",
printk680drivers/scsi/seagate.cprintk("scsi%d : allowed to reconnect\n", hostno);
printk683drivers/scsi/seagate.cprintk("scsi%d : not allowed to reconnect\n", hostno);
printk700drivers/scsi/seagate.cprintk("scsi%d : phase RESELECT \n", hostno);
printk719drivers/scsi/seagate.cprintk("scsi%d : RESELECT timed out while waiting for IO .\n",
printk734drivers/scsi/seagate.cprintk("scsi%d : detected reconnect request to different target.\n" 
printk742drivers/scsi/seagate.cprintk("scsi%d : Unexpected reselect interrupt.  Data bus = %d\n",
printk775drivers/scsi/seagate.cprintk("scsi%d : RESELECT timed out while waiting for SEL.\n",
printk803drivers/scsi/seagate.cprintk ("scsi%d : phase = BUS FREE \n", hostno);
printk829drivers/scsi/seagate.cprintk("scsi%d : phase = SELECTION\n", hostno);
printk857drivers/scsi/seagate.cprintk("scsi%d : arbitration lost\n", hostno);
printk859drivers/scsi/seagate.cprintk("scsi%d : arbitration timeout.\n", hostno);
printk866drivers/scsi/seagate.cprintk("scsi%d : arbitration complete\n", hostno);
printk896drivers/scsi/seagate.cprintk("seagate_st0x_timeout : %d            \r",temp);
printk899drivers/scsi/seagate.cprintk("Done.                                             \n");
printk900drivers/scsi/seagate.cprintk("scsi%d : status = %02x, seagate_st0x_timeout = %d, aborted = %02x \n", 
printk910drivers/scsi/seagate.cprintk ("scsi%d : NO CONNECT with target %d, status = %x \n", 
printk925drivers/scsi/seagate.cprintk("scsi%d : BST asserted after we've been aborted.\n",
printk939drivers/scsi/seagate.cprintk("scsi%d : scatter gather requested, using %d buffers.\n",
printk942drivers/scsi/seagate.cprintk("scsi%d : buffer %d address = %08x length = %d\n",
printk952drivers/scsi/seagate.cprintk("scsi%d : scatter gather not requested.\n", hostno);
printk960drivers/scsi/seagate.cprintk("scsi%d : len = %d\n", hostno, len);
printk999drivers/scsi/seagate.cprintk("scsi%d : phase = INFORMATION TRANSFER\n", hostno);
printk1020drivers/scsi/seagate.cprintk("scsi%d : got parity error\n", hostno);
printk1034drivers/scsi/seagate.cprintk("scsi%d : phase = DATA OUT\n",
printk1038drivers/scsi/seagate.cprintk("scsi%d : phase = DATA IN\n",
printk1042drivers/scsi/seagate.cprintk("scsi%d : phase = COMMAND OUT\n",
printk1046drivers/scsi/seagate.cprintk("scsi%d : phase = STATUS IN\n",
printk1050drivers/scsi/seagate.cprintk("scsi%d : phase = MESSAGE OUT\n",
printk1054drivers/scsi/seagate.cprintk("scsi%d : phase = MESSAGE IN\n",
printk1058drivers/scsi/seagate.cprintk("scsi%d : phase = UNKNOWN\n",
printk1075drivers/scsi/seagate.cprintk("scsi%d: underflow to target %d lun %d \n", 
printk1089drivers/scsi/seagate.cprintk("scsi%d : FAST transfer, underflow = %d, transfersize = %d\n"
printk1117drivers/scsi/seagate.cprintk("scsi%d : FAST transfer complete len = %d data = %08x\n", 
printk1187drivers/scsi/seagate.cprintk("scsi%d : next scatter-gather buffer len = %d address = %08x\n",
printk1216drivers/scsi/seagate.cprintk("scsi%d : FAST transfer, underflow = %d, transfersize = %d\n"
printk1244drivers/scsi/seagate.cprintk("scsi%d: transfered += %d\n", hostno, transfersize);
printk1249drivers/scsi/seagate.cprintk("scsi%d : FAST transfer complete len = %d data = %08x\n", 
printk1258drivers/scsi/seagate.cprintk("scsi%d: transfered += %d\n", hostno, len);
printk1321drivers/scsi/seagate.cprintk("scsi%d: transfered -= %d\n", hostno, len);
printk1333drivers/scsi/seagate.cprintk("scsi%d : next scatter-gather buffer len = %d address = %08x\n",
printk1373drivers/scsi/seagate.cprintk("scsi%d : sent IDENTIFY message.\n", hostno);
printk1383drivers/scsi/seagate.cprintk("scsi%d : sent ABORT message to cancel incorrect I_T_L nexus.\n", hostno);
printk1387drivers/scsi/seagate.cprintk("correct\n");
printk1391drivers/scsi/seagate.cprintk("scsi%d : target %d requested MSGOUT, sent NOP message.\n", hostno, target);
printk1408drivers/scsi/seagate.cprintk("scsi%d : disconnected.\n", hostno);
printk1421drivers/scsi/seagate.cprintk("scsi%d : command complete.\n", hostno);
printk1427drivers/scsi/seagate.cprintk("scsi%d : abort message.\n", hostno);
printk1437drivers/scsi/seagate.cprintk("scsi%d : pointers saved.\n", hostno);
printk1447drivers/scsi/seagate.cprintk("scsi%d : pointers restored.\n", hostno);
printk1463drivers/scsi/seagate.cprintk("scsi%d : IDENTIFY message received from id %d, lun %d.\n",
printk1475drivers/scsi/seagate.cprintk("scsi%d : unknown message %d from target %d.\n",
printk1483drivers/scsi/seagate.cprintk("scsi%d : unknown phase.\n", hostno); 
printk1501drivers/scsi/seagate.cprintk("scsi%d : Transfered %d bytes\n", hostno, transfered);
printk1506drivers/scsi/seagate.cprintk("Buffer : \n");
printk1508drivers/scsi/seagate.cprintk ("%02x  ", ((unsigned char *) data)[i]);  /* WDE mod */
printk1509drivers/scsi/seagate.cprintk("\n");
printk1511drivers/scsi/seagate.cprintk("scsi%d : status = ", hostno);
printk1513drivers/scsi/seagate.cprintk("message = %02x\n", message);
printk1548drivers/scsi/seagate.cprintk("scsi%d : keeping I_T_L nexus established for linked command.\n", 
printk1567drivers/scsi/seagate.cprintk("scsi%d : closing I_T_L nexus.\n", hostno);
printk1579drivers/scsi/seagate.cprintk("scsi%d : exiting seagate_st0x_queue_command() with reconnect enabled.\n",
printk1609drivers/scsi/seagate.cprintk("In seagate_st0x_reset()\n");
printk1628drivers/scsi/seagate.cprintk("SCSI bus reset.\n");
printk1706drivers/scsi/seagate.cprintk("scsi%d : heads = %d cylinders = %d sectors = %d total = %d formatted = %d\n",
printk272drivers/scsi/sg.cprintk("unexpected done for sg %d\n",dev);
printk331drivers/scsi/sg.cprintk("sg_write: sleeping on pending request\n");
printk393drivers/scsi/sg.cprintk("allocating device\n");
printk409drivers/scsi/sg.cprintk("device allocated\n");
printk462drivers/scsi/sg.cprintk("do cmd\n");
printk475drivers/scsi/sg.cprintk("done cmd\n");
printk531drivers/scsi/sg.cprintk("Detected scsi generic sg%c at scsi%d, channel %d, id %d, lun %d\n",
printk549drivers/scsi/sg.cprintk("Unable to get major %d for generic SCSI device\n",
printk560drivers/scsi/sg.cprintk("sg: Init generic device.\n");
printk117drivers/scsi/sr.cprintk("CD-ROM request error: invalid device.\n");
printk155drivers/scsi/sr.cprintk("sr.c done: %x %x\n",result, SCpnt->request.bh->b_data);
printk204drivers/scsi/sr.cprintk("(%x %x %x) ",SCpnt->request.bh, SCpnt->request.nr_sectors, 
printk252drivers/scsi/sr.cprintk("CD-ROM error: ");
printk254drivers/scsi/sr.cprintk("command was: ");
printk270drivers/scsi/sr.cprintk("CDROM not ready.  Make sure you have a disc in the drive.\n");
printk279drivers/scsi/sr.cprintk("SCSI CD error : host %d id %d lun %d return code = %03x\n", 
printk328drivers/scsi/sr.cprintk("sr_photocd: CDROM and/or the driver does not support multisession CD's");
printk356drivers/scsi/sr.cprintk("sr_photocd: use NEC code\n");
printk367drivers/scsi/sr.cprintk("sr_photocd: ioctl error (NEC): 0x%x\n",rc);
printk371drivers/scsi/sr.cprintk("sr_photocd: (NEC) Hmm, seems the CDROM doesn't support multisession CD's\n");
printk382drivers/scsi/sr.cprintk("sr_photocd: multisession CD detected. start: %lu\n",sector);
printk389drivers/scsi/sr.cprintk("sr_photocd: use TOSHIBA code\n");
printk408drivers/scsi/sr.cprintk("sr_photocd: drive not ready\n");
printk410drivers/scsi/sr.cprintk("sr_photocd: (TOSHIBA) Hmm, seems the CDROM doesn't support multisession CD's\n");
printk414drivers/scsi/sr.cprintk("sr_photocd: ioctl error (TOSHIBA #1): 0x%x\n",rc);
printk425drivers/scsi/sr.cprintk("sr_photocd: multisession CD detected: start: %lu\n",sector);
printk439drivers/scsi/sr.cprintk("sr_photocd: ioctl error (TOSHIBA #2): 0x%x\n",rc);
printk443drivers/scsi/sr.cprintk("sr_photocd: get_density: 0x%x\n",rec[4]);
printk449drivers/scsi/sr.cprintk("sr_photocd: doing set_density\n");
printk464drivers/scsi/sr.cprintk("sr_photocd: ioctl error (TOSHIBA #3): 0x%x\n",rc);
printk474drivers/scsi/sr.cprintk("sr_photocd: use SONY/PIONEER code\n");
printk486drivers/scsi/sr.cprintk("sr_photocd: ioctl error (SONY): 0x%x\n",rc);
printk490drivers/scsi/sr.cprintk("sr_photocd: (SONY) Hmm, seems the CDROM doesn't support multisession CD's\n");
printk498drivers/scsi/sr.cprintk ("sr_photocd: multisession CD detected. start: %lu\n",sector);
printk757drivers/scsi/sr.cprintk("Warning - running *really* short on DMA buffers\n");
printk801drivers/scsi/sr.cprintk("Warning: Running low on SCSI DMA buffers");
printk814drivers/scsi/sr.cprintk("SR: %d %d %d %d %d *** ",SCpnt->use_sg, SCpnt->request.sector,
printk819drivers/scsi/sr.cprintk("SGlist: %d %x %x %x\n", count,
printk899drivers/scsi/sr.cprintk("ReadCD: %d %d %d %d\n",block, realcount, buffer, this_count);
printk900drivers/scsi/sr.cprintk("Use sg: %d\n", SCpnt->use_sg);
printk901drivers/scsi/sr.cprintk("Dumping command: ");
printk902drivers/scsi/sr.cfor(i=0; i<12; i++) printk("%2.2x ", cmd[i]);
printk903drivers/scsi/sr.cprintk("\n");
printk930drivers/scsi/sr.cprintk("Detected scsi CD-ROM sr%d at scsi%d, channel %d, id %d, lun %d\n", 
printk1028drivers/scsi/sr.cprintk ("scd%d : unsupported sector size %d.\n",
printk1051drivers/scsi/sr.cprintk("Unable to get major %d for SCSI-CD\n",MAJOR_NR);
printk1091drivers/scsi/sr.cprintk("Scd sectorsize = %d bytes.\n", scsi_CDs[i].sector_size);
printk1154drivers/scsi/sr.cprintk(KERN_INFO __FILE__ ": module is in use, remove rejected\n");
printk59drivers/scsi/sr_ioctl.cprintk("Disc change detected.\n");
printk62drivers/scsi/sr_ioctl.cprintk("CDROM not ready.  Make sure there is a disc in the drive.\n");
printk65drivers/scsi/sr_ioctl.cprintk("CDROM (ioctl) reports ILLEGAL REQUEST.\n");
printk68drivers/scsi/sr_ioctl.cprintk("SCSI CD error: host %d id %d lun %d return code = %03x\n", 
printk73drivers/scsi/sr_ioctl.cprintk("\tSense class %x, sense error %x, extended sense %x\n",
printk336drivers/scsi/sr_ioctl.cprintk ("Hosed while obtaining audio mode page\n");
printk355drivers/scsi/sr_ioctl.cprintk ("Hosed while obtaining mask for audio mode page\n");
printk122drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Error: %x, cmd: %x %x %x %x %x %x Len: %d\n",
printk130drivers/scsi/st.cprintk("\n");
printk145drivers/scsi/st.cprintk(KERN_WARNING "st%d: Error with sense data: ", dev);
printk149drivers/scsi/st.cprintk(KERN_WARNING "st%d: Error %x.\n", dev, result);
printk170drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Recovered %s error (%d).\n", dev, stp,
printk223drivers/scsi/st.cprintk(KERN_ERR "st?: Illegal interrupt device %x\n", st_nbr);
printk235drivers/scsi/st.cprintk(KERN_ERR "st%d: Can't get SCSI request.\n", TAPE_NR(STp->devt));
printk309drivers/scsi/st.cprintk(KERN_ERR "st%d: Backing over filemark failed.\n", TAPE_NR(STp->devt));
printk333drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Async write error (flush) %x.\n",
printk353drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Flushing %d bytes.\n", TAPE_NR(STp->devt), transfer);
printk370drivers/scsi/st.cprintk(KERN_ERR "st%d: Error on flush.\n", TAPE_NR(STp->devt));
printk462drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Device already in use.\n", dev);
printk475drivers/scsi/st.cprintk(KERN_WARNING "st%d: No free buffers.\n", dev);
printk523drivers/scsi/st.cprintk(KERN_NOTICE "st%d: No tape.\n", dev);
printk554drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Block limits %d - %d bytes.\n", dev, STp->min_block,
printk562drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Can't read block limits.\n", dev);
printk575drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: No Mode Sense.\n", dev);
printk585drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Mode sense. Length %d, medium %x, WBS %x, BLL %d\n",
printk598drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Density %x, tape length: %x, drv buffer: %d\n",
printk607drivers/scsi/st.cprintk(KERN_NOTICE "st%d: Blocksize %d too large for buffer.\n", dev,
printk625drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Block size: %d, buffer size: %d (%d blocks).\n", dev,
printk634drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Write protected\n", dev);
printk672drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: File length %ld bytes.\n",
printk674drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Async write waits %d, finished %d.\n",
printk692drivers/scsi/st.cprintk(KERN_ERR "st%d: Error on write filemark.\n", dev);
printk704drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Buffer flushed, %d EOF(s) written\n",
printk763drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Incorrect device.\n", dev);
printk795drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Async write error (write) %x.\n", dev,
printk865drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Error on write:\n", dev);
printk893drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: EOM with %d bytes unwritten.\n",
printk903drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: EOM with lost data.\n", dev);
printk1007drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Incorrect device.\n", dev);
printk1036drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: EOF flag up. Bytes %d\n", dev,
printk1083drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n",
printk1111drivers/scsi/st.cprintk(KERN_NOTICE "st%d: Incorrect block size.\n", dev);
printk1125drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: EOM detected (%d bytes read).\n", dev,
printk1138drivers/scsi/st.cprintk(ST_DEB_MSG
printk1147drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Tape error while reading.\n", dev);
printk1157drivers/scsi/st.cprintk(ST_DEB_MSG
printk1190drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: EOF up. Left %d, needed %d.\n", dev,
printk1251drivers/scsi/st.cprintk(ST_DEB_MSG
printk1254drivers/scsi/st.cprintk(ST_DEB_MSG
printk1262drivers/scsi/st.cprintk(KERN_WARNING "st: Write threshold %d too small or too large.\n",
printk1268drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Write threshold set to %d bytes.\n", dev,
printk1312drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Spacing tape forward over %d filemarks.\n",
printk1333drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Spacing tape backward over %ld filemarks.\n",
printk1350drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Spacing tape forward %d blocks.\n", dev,
printk1369drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Spacing tape backward %ld blocks.\n", dev, (-ltmp));
printk1384drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Spacing tape forward %d setmarks.\n", dev,
printk1404drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Spacing tape backward %ld setmarks.\n",
printk1427drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Writing %d filemarks.\n", dev,
printk1430drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Writing %d setmarks.\n", dev,
printk1447drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Rewinding tape.\n", dev);
printk1465drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Unloading tape.\n", dev);
printk1472drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: No op on tape.\n", dev);
printk1485drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Retensioning tape.\n", dev);
printk1507drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Spacing to end of recorded medium.\n", dev);
printk1525drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Erasing tape.\n", dev);
printk1534drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Locking drive door.\n", dev);
printk1542drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Unlocking drive door.\n", dev);
printk1567drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Seeking tape to block %ld.\n", dev, arg);
printk1581drivers/scsi/st.cprintk(KERN_WARNING "st%d: Illegal block size.\n", dev);
printk1609drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Setting block size to %d bytes.\n", dev,
printk1614drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Setting density code to %x.\n", dev,
printk1617drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Setting drive buffer code to %d.\n", dev,
printk1760drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Incorrect device.\n", dev);
printk1823drivers/scsi/st.cprintk(KERN_NOTICE "st%d: Could not relock door after bus reset.\n",
printk1902drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: get tape position.\n", dev);
printk1932drivers/scsi/st.cprintk(ST_DEB_MSG "st%d: Can't read tape position.\n", dev);
printk1988drivers/scsi/st.cprintk(KERN_NOTICE "st: Can't allocate new tape buffer (nbr %d).\n",
printk1995drivers/scsi/st.cprintk(ST_DEB_MSG "st: Allocated tape buffer %d (%d bytes).\n",
printk2025drivers/scsi/st.cprintk(ST_DEB_MSG "st: Buffer enlarged to %d bytes.\n", a_size);
printk2050drivers/scsi/st.cprintk(ST_DEB_MSG "st: Buffer normalized to %d bytes.\n",
printk2137drivers/scsi/st.cprintk(KERN_NOTICE "Detected scsi tape st%d at scsi%d, channel %d, id %d, lun %d\n", 
printk2159drivers/scsi/st.cprintk(KERN_ERR "Unable to get major %d for SCSI tapes\n",MAJOR_NR);
printk2173drivers/scsi/st.cprintk(KERN_ERR "Unable to allocate descriptors for SCSI tapes.\n");
printk2179drivers/scsi/st.cprintk(ST_DEB_MSG "st: Buffer size %d bytes, write threshold %d bytes.\n",
printk2215drivers/scsi/st.cprintk(KERN_ERR "Unable to allocate tape buffer pointers.\n");
printk2234drivers/scsi/st.cprintk(KERN_ERR "Can't continue without at least one tape buffer.\n");
printk2242drivers/scsi/st.cprintk(KERN_INFO "Number of tape buffers adjusted.\n");
printk172drivers/scsi/t128.cprintk("t128_setup : usage t128=address,irq\n");
printk215drivers/scsi/t128.cprintk("scsi : probing address %08x\n", (unsigned int) bases[current_base].address);
printk223drivers/scsi/t128.cprintk("scsi-t128 : detected board.\n");
printk230drivers/scsi/t128.cprintk("scsi-t128 : base = %08x\n", (unsigned int) base);
printk248drivers/scsi/t128.cprintk("scsi%d : IRQ%d not free, interrupts disabled\n", 
printk254drivers/scsi/t128.cprintk("scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk255drivers/scsi/t128.cprintk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
printk259drivers/scsi/t128.cprintk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
printk262drivers/scsi/t128.cprintk("scsi%d : at 0x%08x", instance->host_no, (int) 
printk265drivers/scsi/t128.cprintk (" interrupts disabled");
printk267drivers/scsi/t128.cprintk (" irq %d", instance->irq);
printk268drivers/scsi/t128.cprintk(" options CAN_QUEUE=%d  CMD_PER_LUN=%d release=%d",
printk271drivers/scsi/t128.cprintk("\n");
printk345drivers/scsi/t128.cprintk("scsi%d : watchdog timer fired in NCR5380_pread()\n",
printk388drivers/scsi/t128.cprintk("scsi%d : watchdog timer fired in NCR5380_pwrite()\n",
printk148drivers/scsi/t128.h(((unsigned char) printk("scsi%d : read register %d at address %08x\n"\
printk152drivers/scsi/t128.hprintk("scsi%d : write %02x to register %d at address %08x\n",   \
printk316drivers/scsi/u14-34f.cprintk("%s: board_inquiry, adapter busy.\n", BN(j));
printk338drivers/scsi/u14-34f.cprintk("%s: board_inquiry, err 0x%x.\n", BN(j), cpp->adapter_status);
printk390drivers/scsi/u14-34f.cprintk("%s: address 0x%03x in use, skipping probe.\n", 
printk411drivers/scsi/u14-34f.cprintk("%s: unable to allocate IRQ %u, detaching.\n", name, irq);
printk416drivers/scsi/u14-34f.cprintk("%s: unable to allocate DMA channel %u, detaching.\n",
printk425drivers/scsi/u14-34f.cprintk("%s: unable to register host, detaching.\n", name);
printk449drivers/scsi/u14-34f.cprintk("SYS_MASK 0x%x, LCL_MASK 0x%x.\n", sys_mask, lcl_mask);
printk497drivers/scsi/u14-34f.cprintk("%s: %s.\n", BN(j), &HD(j)->board_id[8]);
printk498drivers/scsi/u14-34f.cprintk("%s: firmware %s is outdated, FW PROM should be 28004-006.\n",
printk505drivers/scsi/u14-34f.cprintk("%s: PORT 0x%03x, BIOS 0x%05x, IRQ %u, DMA %u, SG %d, "\
printk543drivers/scsi/u14-34f.cprintk("UltraStor 14F/34F: Copyright (C) 1994, 1995 Dario Ballabio.\n");
printk592drivers/scsi/u14-34f.cprintk("%s: qcomm, no free mailbox, resetting.\n", BN(j));
printk595drivers/scsi/u14-34f.cprintk("%s: qcomm, already in reset.\n", BN(j));
printk601drivers/scsi/u14-34f.cprintk("%s: qcomm, pid %ld, DID_BUS_BUSY, done.\n", BN(j), SCpnt->pid);
printk615drivers/scsi/u14-34f.cif (do_trace) printk("%s: qcomm, mbox %d, target %d, pid %ld.\n",
printk641drivers/scsi/u14-34f.cprintk("%s: qcomm, target %d, pid %ld, adapter busy, DID_ERROR, done.\n", 
printk667drivers/scsi/u14-34f.cprintk("%s: abort, target %d, pid %ld inactive.\n",
printk674drivers/scsi/u14-34f.cprintk("%s: abort, mbox %d, target %d, pid %ld.\n",
printk681drivers/scsi/u14-34f.cprintk("%s: abort, timeout error.\n", BN(j));
printk687drivers/scsi/u14-34f.cprintk("%s: abort, mbox %d is free.\n", BN(j), i);
printk693drivers/scsi/u14-34f.cprintk("%s: abort, mbox %d is in use.\n", BN(j), i);
printk704drivers/scsi/u14-34f.cprintk("%s: abort, mbox %d is in reset.\n", BN(j), i);
printk710drivers/scsi/u14-34f.cprintk("%s: abort, mbox %d is locked.\n", BN(j), i);
printk726drivers/scsi/u14-34f.cprintk("%s: reset, enter, target %d, pid %ld.\n", 
printk730drivers/scsi/u14-34f.cprintk("%s: reset, pid %ld inactive.\n", BN(j), SCarg->pid);
printk733drivers/scsi/u14-34f.cprintk("%s: reset, exit, already in reset.\n", BN(j));
printk739drivers/scsi/u14-34f.cprintk("%s: reset, exit, timeout error.\n", BN(j));
printk754drivers/scsi/u14-34f.cprintk("%s: reset, locked mbox %d forced free.\n", BN(j), i);
printk760drivers/scsi/u14-34f.cprintk("%s: reset, mbox %d in reset, pid %ld.\n",
printk779drivers/scsi/u14-34f.cprintk("%s: reset, cannot reset, timeout error.\n", BN(j));
printk785drivers/scsi/u14-34f.cprintk("%s: reset, board reset done, enabling interrupts.\n", BN(j));
printk796drivers/scsi/u14-34f.cprintk("%s: reset, interrupts disabled, loops %d.\n", BN(j), limit);
printk810drivers/scsi/u14-34f.cprintk("%s, reset, mbox %d locked, DID_RESET, pid %ld done.\n",
printk822drivers/scsi/u14-34f.cprintk("%s: reset, exit, success.\n", BN(j));
printk826drivers/scsi/u14-34f.cprintk("%s: reset, exit, wakeup.\n", BN(j));
printk850drivers/scsi/u14-34f.cprintk("%s, ihdlr, irq %d, unexpected interrupt.\n", driver_name, irq);
printk855drivers/scsi/u14-34f.cif (do_trace) printk("%s: ihdlr, enter, irq %d, calls %d.\n", 
printk870drivers/scsi/u14-34f.cif (do_trace) printk("%s: ihdlr, start service, count %d.\n",
printk889drivers/scsi/u14-34f.cprintk("%s: ihdlr, mbox %d unlocked, count %d.\n",
printk894drivers/scsi/u14-34f.cprintk("%s: ihdlr, mbox %d is free, count %d.\n", 
printk899drivers/scsi/u14-34f.cprintk("%s: ihdlr, mbox %d is in reset.\n", BN(j), i);
printk946drivers/scsi/u14-34f.cprintk("%s: ihdlr, target %d:%d, pid %ld, target_status "\
printk1004drivers/scsi/u14-34f.cprintk("%s: ihdlr, mbox %d, err 0x%x:%x,"\
printk1023drivers/scsi/u14-34f.cprintk("%s: ihdlr, irq %d, no command completed, calls %d.\n",
printk1026drivers/scsi/u14-34f.cif (do_trace) printk("%s: ihdlr, exit, irq %d, calls %d.\n",
printk1032drivers/scsi/u14-34f.cprintk("%s: ihdlr, calls %d, count %d, multi %d.\n", BN(j),
printk350drivers/scsi/ultrastor.cprintk(fmt, command, &config->mscp[command], config->mscp_free);
printk373drivers/scsi/ultrastor.cprintk("US14F: detect: called\n");
printk382drivers/scsi/ultrastor.cprintk("Ultrastor I/O space already in use\n");
printk393drivers/scsi/ultrastor.cprintk("US14F: detect: testing port address %03X\n", config.port_address);
printk400drivers/scsi/ultrastor.cprintk("US14F: detect: wrong product ID 0 - %02X\n", in_byte);
printk402drivers/scsi/ultrastor.cprintk("US14F: detect: no adapter at port %03X\n", config.port_address);
printk416drivers/scsi/ultrastor.cprintk("US14F: detect: wrong product ID 1 - %02X\n", in_byte);
printk418drivers/scsi/ultrastor.cprintk("US14F: detect: no adapter at port %03X\n", config.port_address);
printk433drivers/scsi/ultrastor.cprintk("US14F: detect: no port address found!\n");
printk440drivers/scsi/ultrastor.cprintk("US14F: detect: adapter found at port address %03X\n",
printk473drivers/scsi/ultrastor.cprintk("US14F: detect: not detected.\n");
printk482drivers/scsi/ultrastor.cprintk("US14F: detect: consistency check failed\n");
printk493drivers/scsi/ultrastor.cprintk("US14F: detect: detect succeeded\n"
printk511drivers/scsi/ultrastor.cprintk("Unable to allocate IRQ%u for UltraStor controller.\n",
printk516drivers/scsi/ultrastor.cprintk("Unable to allocate DMA channel %u for UltraStor controller.\n",
printk522drivers/scsi/ultrastor.cprintk("UltraStor driver version" VERSION ".  Using %d SG lists.\n",
printk534drivers/scsi/ultrastor.cprintk("US24F: detect");
printk553drivers/scsi/ultrastor.cprintk("U24F: found disabled card in slot %u\n", i);
printk558drivers/scsi/ultrastor.cprintk("U24F: found card in slot %u\n", i);
printk577drivers/scsi/ultrastor.cprintk("U24F: invalid IRQ\n");
printk582drivers/scsi/ultrastor.cprintk("Unable to allocate IRQ%u for UltraStor controller.\n",
printk597drivers/scsi/ultrastor.cprintk("US24F: detect: detect succeeded\n"
printk625drivers/scsi/ultrastor.cprintk("UltraStor driver version " VERSION ".  Using %d SG lists.\n",
printk773drivers/scsi/ultrastor.cprintk("USx4F: queuecommand: aborted\n");
printk808drivers/scsi/ultrastor.cprintk("USx4F: queuecommand: returning\n");
printk884drivers/scsi/ultrastor.cprintk("Ux4F: abort while completed command pending\n");
printk914drivers/scsi/ultrastor.cprintk(out, ogm_status, ogm_addr, icm_status, icm_addr);
printk936drivers/scsi/ultrastor.cprintk("abort: command mismatch, %p != %p\n",
printk959drivers/scsi/ultrastor.cprintk("US14F: reset: called\n");
printk1044drivers/scsi/ultrastor.cprintk("Ux4F interrupt: bad MSCP address %x\n", (unsigned int) mscp);
printk1057drivers/scsi/ultrastor.cprintk("US24F: ICM status %x for MSCP %d (%x)\n", icm_status,
printk1065drivers/scsi/ultrastor.cprintk("UltraStor abort command failed\n");
printk1087drivers/scsi/ultrastor.cprintk("MSCP %d (%x): no command\n", mscp_index, (unsigned int) mscp);
printk1137drivers/scsi/ultrastor.cprintk("Ux4 interrupt: MSCP %d (%x) aborted = %d\n",
printk1145drivers/scsi/ultrastor.cprintk("US14F: interrupt: unexpected interrupt\n");
printk1148drivers/scsi/ultrastor.cprintk("Ux4F: multiple commands completed\n");
printk1151drivers/scsi/ultrastor.cprintk("USx4F: interrupt: returning\n");
printk591drivers/scsi/wd7000.cprintk("wd7000 command_out: WAIT failed(%d)\n", len+1);
printk702drivers/scsi/wd7000.cprintk("wd7000 mail_out: %06x",(unsigned int) scbptr);
printk711drivers/scsi/wd7000.cprintk(" using OGMB %x",ogmb);
printk723drivers/scsi/wd7000.cprintk(", scb is %x",(unsigned int) scbptr);
printk735drivers/scsi/wd7000.cprintk(", no free OGMBs.\n");
printk745drivers/scsi/wd7000.cprintk(", awaiting interrupt.\n");
printk793drivers/scsi/wd7000.cprintk("\nSCSI command error: SCSI %02x host %04x return %d",
printk803drivers/scsi/wd7000.cprintk("wd7000_scsi_done: %06x\n",(unsigned int) SCpnt);
printk822drivers/scsi/wd7000.cprintk("wd7000_intr_handle: irq = %d, host = %06x\n", irq, host);
printk827drivers/scsi/wd7000.cprintk("wd7000_intr_handle: intr stat = %02x\n",flag);
printk840drivers/scsi/wd7000.cprintk("wd7000_intr_handle: phantom interrupt...\n");
printk850drivers/scsi/wd7000.cprintk("wd7000_intr_handle: free outgoing mailbox");
printk865drivers/scsi/wd7000.cprintk("wd7000_intr_handle: unsolicited interrupt %02xh\n",
printk928drivers/scsi/wd7000.cprintk("Using scatter/gather with %d elements.\n",SCpnt->use_sg);
printk982drivers/scsi/wd7000.cprintk("wd7000_diagnostics: timed out.\n");
printk986drivers/scsi/wd7000.cprintk("wd7000_diagnostics: failed (%02x,%02x)\n",
printk1013drivers/scsi/wd7000.cprintk("wd7000_init: ");
printk1016drivers/scsi/wd7000.cprintk("RAM failure.\n");
printk1019drivers/scsi/wd7000.cprintk("FIFO R/W failed\n");
printk1022drivers/scsi/wd7000.cprintk("SBIC register R/W failed\n");
printk1025drivers/scsi/wd7000.cprintk("Initialization D-FF failed.\n");
printk1028drivers/scsi/wd7000.cprintk("Host IRQ D-FF failed.\n");
printk1031drivers/scsi/wd7000.cprintk("ROM checksum error.\n");
printk1034drivers/scsi/wd7000.cprintk("diagnostic code %02Xh received.\n", diag);
printk1046drivers/scsi/wd7000.cprintk("wd7000_init: adapter initialization failed.\n"); 
printk1052drivers/scsi/wd7000.cprintk("wd7000_init: can't get IRQ %d.\n", host->irq);
printk1056drivers/scsi/wd7000.cprintk("wd7000_init: can't get DMA channel %d.\n", host->dma);
printk1072drivers/scsi/wd7000.cprintk("wd7000_init: WAIT timed out.\n"); 
printk1126drivers/scsi/wd7000.cprintk("WD-7000 SST BIOS detected at %04X: checking...\n",
printk1135drivers/scsi/wd7000.cprintk("IO %xh already in use.\n", host->iobase);
printk1148drivers/scsi/wd7000.cprintk("wd7000_detect: adapter allocated at %06x\n",
printk1168drivers/scsi/wd7000.cprintk("Western Digital WD-7000 (%d.%d) ",
printk1170drivers/scsi/wd7000.cprintk("using IO %xh IRQ %d DMA %d.\n",
printk1199drivers/scsi/wd7000.cprintk("wd7000_abort: lost interrupt\n");
printk183drivers/sound/ad1848.cprintk ("ad1848: Auto calibration timed out(1).\n");
printk195drivers/sound/ad1848.cprintk ("ad1848: Auto calibration timed out(3).\n");
printk558drivers/sound/ad1848.cprintk ("ad1848: Already opened\n");
printk588drivers/sound/ad1848.cDEB (printk ("ad1848_close(void)\n"));
printk680drivers/sound/ad1848.cprintk ("ad1848: Can't find speed???\n");
printk1124drivers/sound/ad1848.cDDB (printk ("ad1848 detect error - step 0\n"));
printk1129drivers/sound/ad1848.cprintk ("\n\nad1848.c: Port %x not free.\n\n", io_base);
printk1154drivers/sound/ad1848.cDDB (printk ("ad1848 detect error - step A (%02x)\n",
printk1170drivers/sound/ad1848.cDDB (printk ("ad1848 detect error - step B (%x/%x)\n", tmp1, tmp2));
printk1179drivers/sound/ad1848.cDDB (printk ("ad1848 detect error - step C (%x/%x)\n", tmp1, tmp2));
printk1193drivers/sound/ad1848.cDDB (printk ("ad1848 detect error - step D (%x)\n", tmp1));
printk1214drivers/sound/ad1848.cDDB (printk ("ad1848 detect error - step F(%d/%x/%x)\n", i, tmp1, tmp2));
printk1250drivers/sound/ad1848.cDDB (printk ("ad1848 detect error - step H(%x)\n", tmp1));
printk1423drivers/sound/ad1848.cprintk (" <%s>", ad1848_pcm_operations[nr_ad1848_devs].name);
printk1436drivers/sound/ad1848.cprintk ("ad1848: IRQ in use\n");
printk1455drivers/sound/ad1848.cprintk ("[IRQ conflict???]");
printk1484drivers/sound/ad1848.cprintk ("ad1848.c: Can't allocate DMA%d\n", dma_playback);
printk1488drivers/sound/ad1848.cprintk ("ad1848.c: Can't allocate DMA%d\n", dma_capture);
printk1507drivers/sound/ad1848.cprintk ("AD1848: Too many PCM devices available\n");
printk1539drivers/sound/ad1848.cprintk ("ad1848: Can't find device to be undoaded. Base=%x\n",
printk1565drivers/sound/ad1848.cprintk ("ad1848.c: Bogus interrupt %d\n", irq);
printk1578drivers/sound/ad1848.cprintk ("ad1848_interrupt: Why?\n");
printk1625drivers/sound/ad1848.cprintk ("MSS: I/O port conflict\n");
printk1653drivers/sound/ad1848.cDDB (printk ("No MSS signature detected on port 0x%x (0x%x)\n",
printk1660drivers/sound/ad1848.cprintk ("MSS: Bad IRQ %d\n", hw_config->irq);
printk1666drivers/sound/ad1848.cprintk ("MSS: Bad DMA %d\n", hw_config->dma);
printk1676drivers/sound/ad1848.cprintk ("MSS: Can't use DMA0 with a 8 bit card/slot\n");
printk1682drivers/sound/ad1848.cprintk ("MSS: Can't use IRQ%d with a 8 bit card/slot\n", hw_config->irq);
printk1718drivers/sound/ad1848.cprintk ("[IRQ Conflict?]");
printk50drivers/sound/adlib_card.cprintk ("\n\nopl3.c: I/O port %x already in use\n\n", hw_config->io_base);
printk433drivers/sound/aedsp16.cprintk ("[aedsp16] DSP Command (0x%x) timeout.\n", cmd);
printk445drivers/sound/aedsp16.cprintk ("[aedsp16] CMD 0x%x: failed!\n", CMD6);
printk463drivers/sound/aedsp16.cprintk ("[aedsp16] CMD 0x%x: failed!\n", CMD3);
printk475drivers/sound/aedsp16.cprintk ("[aedsp16]     CheckDSPOkay: failed\n");
printk481drivers/sound/aedsp16.cprintk ("[aedsp16] ReadData after CMD 0x%x: failed\n", CMD3);
printk488drivers/sound/aedsp16.cprintk ("[aedsp16] CMD 0x%x: failed!\n", CMD4);
printk494drivers/sound/aedsp16.cprintk ("[aedsp16] CMD 0x%x: failed!\n", CMD5);
printk500drivers/sound/aedsp16.cprintk ("[aedsp16] Initialization of (M)IRQ and DMA: failed!\n");
printk579drivers/sound/aedsp16.cprintk ("[aedsp16] ResetBoard: failed!\n");
printk586drivers/sound/aedsp16.cprintk ("[aedsp16] CheckDSPOkay: failed!\n");
printk593drivers/sound/aedsp16.cprintk ("[aedsp16] CMD 0x%x: failed!\n", CMD1);
printk599drivers/sound/aedsp16.cprintk ("[aedsp16] GetCardName: failed!\n");
printk608drivers/sound/aedsp16.cprintk ("[aedsp16] Warning: non SC-6000 audio card!\n");
printk612drivers/sound/aedsp16.cprintk ("[aedsp16] CMD 0x%x: failed!\n", CMD2);
printk618drivers/sound/aedsp16.cprintk ("[aedsp16] GetCardVersion: failed!\n");
printk624drivers/sound/aedsp16.cprintk ("[aedsp16] SetUpBoard: failed!\n");
printk632drivers/sound/aedsp16.cprintk ("[aedsp16] Can't initialize Microsoft Sound System mode.\n");
printk652drivers/sound/aedsp16.cprintk ("Audio Excel DSP 16 init v%s (%s %s) [%s]\n",
printk685drivers/sound/aedsp16.cprintk ("AEDSP16/SBPRO I/O port region is alredy in use.\n");
printk738drivers/sound/aedsp16.cprintk ("MSS I/O port region is alredy in use.\n");
printk750drivers/sound/aedsp16.cprintk ("AEDSP16 I/O port region is alredy in use.\n");
printk803drivers/sound/aedsp16.cprintk ("SB I/O port region is alredy in use.\n");
printk815drivers/sound/aedsp16.cprintk ("AEDSP16 I/O port region is alredy in use.\n");
printk861drivers/sound/aedsp16.cprintk ("[aedsp16] ResetAEDSP16 called.\n");
printk109drivers/sound/audio.cprintk ("Sound: Can't access coprocessor device\n");
printk369drivers/sound/audio.cprintk ("/dev/dsp%d: No coprocessor for this device\n", dev);
printk87drivers/sound/cs4232.cprintk ("cs4232.c: I/O port 0x%03x not free\n", base);
printk59drivers/sound/dev_table.cprintk ("Sound initialization started\n");
printk88drivers/sound/dev_table.cprintk ("snd%d",
printk92drivers/sound/dev_table.cprintk (" at 0x%x",
printk96drivers/sound/dev_table.cprintk (" irq %d",
printk100drivers/sound/dev_table.cprintk (" drq %d",
printk103drivers/sound/dev_table.cprintk (",%d\n",
printk106drivers/sound/dev_table.cprintk ("\n");
printk114drivers/sound/dev_table.cprintk ("Sound initialization complete\n");
printk133drivers/sound/dev_table.cprintk ("Sound unload started\n");
printk144drivers/sound/dev_table.cprintk ("Sound unload complete\n");
printk154drivers/sound/dev_table.cDDB (printk ("unload driver %d: ", type));
printk248drivers/sound/dev_table.cDDB (printk ("sndtable_init_card(%d) entered\n", unit));
printk280drivers/sound/dev_table.cDDB (printk ("Located card - calling attach routine\n"));
printk281drivers/sound/dev_table.cprintk ("snd%d", unit);
printk285drivers/sound/dev_table.cDDB (printk ("attach routine finished\n"));
printk286drivers/sound/dev_table.cprintk (" at 0x%x irq %d drq %d",
printk291drivers/sound/dev_table.cprintk (",%d\n",
printk294drivers/sound/dev_table.cprintk ("\n");
printk299drivers/sound/dev_table.cprintk ("sndtable_init_card: No card defined with type=%d, num cards: %d\n",
printk380drivers/sound/dev_table.cprintk ("Sound: Invalid setup parameter 0x%08x\n", val);
printk90drivers/sound/dmabuf.cprintk ("Warning: Invalid PCM parameters[%d] sr=%d, nc=%d, sz=%d\n",
printk191drivers/sound/dmabuf.cprintk ("Unable to grab(2) DMA%d for the audio driver\n", chan);
printk227drivers/sound/dmabuf.cprintk ("PCM device %d not installed.\n", dev);
printk233drivers/sound/dmabuf.cprintk ("PCM device %d not initialized\n", dev);
printk537drivers/sound/dmabuf.cprintk ("Sound: DMA (input) timed out - IRQ/DRQ config error?\n");
printk566drivers/sound/dmabuf.cprintk ("\nSound: Audio queue1 corrupted for dev%d (%d/%d)\n",
printk796drivers/sound/dmabuf.cprintk ("Sound: Device doesn't have full duplex capability\n");
printk1000drivers/sound/dmabuf.cprintk ("Sound: DMA (output) timed out - IRQ/DRQ config error?\n");
printk1038drivers/sound/dmabuf.cprintk ("Sound warning: DMA buffers out of sync %d != %d\n", buff_no, dmap->qtail);
printk1042drivers/sound/dmabuf.cprintk ("\nSound: Audio queue2 corrupted for dev%d (%d/%d)\n",
printk1178drivers/sound/dmabuf.cprintk ("\nSound: Audio queue3 corrupted for dev%d (%d/%d)\n",
printk1244drivers/sound/dmabuf.cprintk ("Sound: Recording overrun\n");
printk1262drivers/sound/dmabuf.cprintk ("\nSound: Audio queue4 corrupted for dev%d (%d/%d)\n",
printk1312drivers/sound/dmabuf.cprintk ("Unable to grab DMA%d for the audio driver\n",
printk63drivers/sound/gus_card.cprintk ("gus_card.c: Can't allocate DMA channel\n");
printk66drivers/sound/gus_card.cprintk ("gus_card.c: Can't allocate DMA channel2\n");
printk87drivers/sound/gus_card.cprintk (" WARNING! GUS found at %x, config was %x ", io_addr, hw_config->io_base);
printk92drivers/sound/gus_card.cprintk ("gus_card.c: Can't allocate DMA channel\n");
printk95drivers/sound/gus_card.cprintk ("gus_card.c: Can't allocate DMA channel2\n");
printk147drivers/sound/gus_card.cDDB (printk ("unload_gus(%x)\n", hw_config->io_base));
printk62drivers/sound/gus_midi.cprintk ("GUS: Midi busy\n");
printk259drivers/sound/gus_midi.cprintk ("Sound: Too many midi devices detected\n");
printk767drivers/sound/gus_wave.cprintk ("Warning! GUS IRQ not selected\n");
printk779drivers/sound/gus_wave.cprintk ("Warning! GUS DMA not selected\n");
printk788drivers/sound/gus_wave.cprintk ("Warning! GUS DMA not selected\n");
printk793drivers/sound/gus_wave.cprintk ("Warning! Invalid GUS MAX DMA\n");
printk942drivers/sound/gus_wave.cprintk ("GUS: Undefined patch %d for voice %d\n", instr_no, voice);
printk948drivers/sound/gus_wave.cprintk ("GUS: Sample #%d not loaded for patch %d (voice %d)\n",
printk1203drivers/sound/gus_wave.cprintk ("GUS: Invalid voice\n");
printk1263drivers/sound/gus_wave.cprintk ("GUS: Patch %d not defined for note %d\n", patch, note_num);
printk1312drivers/sound/gus_wave.cprintk ("GUS: Sample address error\n");
printk1481drivers/sound/gus_wave.cprintk ("GUS: Loading saples without DMA\n");
printk1521drivers/sound/gus_wave.cprintk ("GUS Error: Invalid patch format (key) 0x%x\n", format);
printk1527drivers/sound/gus_wave.cprintk ("GUS Error: Patch header too short\n");
printk1535drivers/sound/gus_wave.cprintk ("GUS: Sample table full\n");
printk1550drivers/sound/gus_wave.cprintk ("GUS: Invalid patch number %d\n", instr);
printk1556drivers/sound/gus_wave.cprintk ("GUS Warning: Patch record too short (%d<%d)\n",
printk1563drivers/sound/gus_wave.cprintk ("GUS: Invalid sample length %d\n", (int) patch.len);
printk1571drivers/sound/gus_wave.cprintk ("GUS: Invalid loop start\n");
printk1577drivers/sound/gus_wave.cprintk ("GUS: Invalid loop end\n");
printk1593drivers/sound/gus_wave.cprintk ("GUS: Sample (16 bit) too long %d\n", (int) patch.len);
printk1750drivers/sound/gus_wave.cprintk ("GUS: DMA Transfer timed out\n");
printk2273drivers/sound/gus_wave.cprintk ("GUS Warning: PCM buffers out of sync\n");
printk2382drivers/sound/gus_wave.cprintk ("GUS Error: 16 bit recording not supported\n");
printk2993drivers/sound/gus_wave.cprintk ("ERROR! Invalid IRQ#%d. GUS Disabled", irq);
printk2999drivers/sound/gus_wave.cprintk ("ERROR! Invalid DMA#%d. GUS Disabled", dma);
printk3087drivers/sound/gus_wave.cprintk ("[Where's the CS4231?]");
printk3089drivers/sound/gus_wave.cprintk ("\n\n\nGUS MAX support was not compiled in!!!\n\n\n\n");
printk3102drivers/sound/gus_wave.cprintk (" <Gravis UltraSound %s (%dk)>", model_num, (int) gus_mem_size / 1024);
printk3107drivers/sound/gus_wave.cprintk ("GUS Error: Too many synthesizers\n");
printk3136drivers/sound/gus_wave.cprintk ("GUS: Too many PCM devices available\n");
printk173drivers/sound/mad16.cDDB (printk ("MC1_PORT returned 0xff\n"));
printk183drivers/sound/mad16.cDDB (printk ("MC1_PORT didn't close after read (0x%02x)\n", tmp2));
printk192drivers/sound/mad16.cDDB (printk ("Bit revert test failed (0x%02x, 0x%02x)\n", tmp, tmp2));
printk221drivers/sound/mad16.cDDB (printk ("--- Detecting MAD16 / Mozart ---\n"));
printk229drivers/sound/mad16.cDDB (printk ("Detect using password = 0xE2\n"));
printk235drivers/sound/mad16.cDDB (printk ("Detect using password = 0xE3\n"));
printk240drivers/sound/mad16.cDDB (printk ("mad16.c: 82C929 detected\n"));
printk248drivers/sound/mad16.cDDB (printk ("mad16.c: Mozart detected\n"));
printk253drivers/sound/mad16.cDDB (printk ("mad16.c: 82C928 detected???\n"));
printk259drivers/sound/mad16.cDDB (printk ("port %03x = %03x\n", i, mad_read (i)));
printk271drivers/sound/mad16.cprintk ("MAD16/Mozart: Bad WSS base address 0x%x\n", hw_config->io_base);
printk323drivers/sound/mad16.cDDB (printk ("port %03x after init = %03x\n", i, mad_read (i)));
printk331drivers/sound/mad16.cprintk ("MSS: I/O port conflict\n");
printk344drivers/sound/mad16.cDDB (printk ("No MSS signature detected on port 0x%x (0x%x)\n",
printk351drivers/sound/mad16.cprintk ("MSS: Bad IRQ %d\n", hw_config->irq);
printk357drivers/sound/mad16.cprintk ("MSS: Bad DMA %d\n", hw_config->dma);
printk367drivers/sound/mad16.cprintk ("MSS: Can't use DMA0 with a 8 bit card/slot\n");
printk373drivers/sound/mad16.cprintk ("MSS: Can't use IRQ%d with a 8 bit card/slot\n", hw_config->irq);
printk414drivers/sound/mad16.cprintk ("[IRQ Conflict?]");
printk430drivers/sound/mad16.cprintk ("MAD16: Invalid capture DMA\n");
printk528drivers/sound/mad16.cprintk ("mad16/Mozart: Invalid MIDI IRQ\n");
printk549drivers/sound/mad16.cprintk ("MAD16 / Mozart: Invalid MIDI port 0x%x\n", hw_config->io_base);
printk568drivers/sound/mad16.cprintk ("MAD16 / Mozart: Invalid MIDI IRQ %d\n", hw_config->irq);
printk81drivers/sound/mad16_sb_midi.cprintk ("MAD16 (SBP mode): DSP Command(%x) Timeout.\n", val);
printk82drivers/sound/mad16_sb_midi.cprintk ("IRQ conflict???\n");
printk146drivers/sound/mad16_sb_midi.cprintk ("MAD16 SB MIDI: I/O base %x not free\n", hw_config->io_base);
printk171drivers/sound/mad16_sb_midi.cprintk ("MAD16 SB MIDI: IRQ not free\n");
printk177drivers/sound/mad16_sb_midi.cprintk (" <MAD16 MIDI (SB mode)>");
printk193drivers/sound/mad16_sb_midi.cprintk ("MAD16_SB Error: MIDI hardware not installed\n");
printk203drivers/sound/mad16_sb_midi.cprintk ("MAD16 (SBP mode): Midi input not currently supported\n");
printk260drivers/sound/mad16_sb_midi.cprintk ("MAD16_SB Error: Unable to send a MIDI byte\n");
printk276drivers/sound/mad16_sb_midi.cprintk ("MAD16 (SBP mode): MIDI input not implemented.\n");
printk331drivers/sound/mad16_sb_midi.cprintk ("Sound: Too many midi devices detected\n");
printk69drivers/sound/maui.cprintk ("Maui: Receive timeout\n");
printk88drivers/sound/maui.cprintk ("Maui: Write timeout\n");
printk115drivers/sound/maui.cprintk ("Maui: Unknown patch format\n");
printk120drivers/sound/maui.cprintk ("Maui error: Patch header too short\n");
printk135drivers/sound/maui.cprintk ("Maui warning: Host command record too short (%d<%d)\n",
printk158drivers/sound/maui.cprintk ("Maui: Error status %02x\n", i);
printk194drivers/sound/maui.cprintk ("WaveFront hardware version %d.%d\n", tmp1, tmp2);
printk200drivers/sound/maui.cprintk ("WaveFront firmware version %d.%d\n", tmp1, tmp2);
printk209drivers/sound/maui.cprintk ("Available DRAM %dk\n", tmp1 / 1024);
printk225drivers/sound/maui.cprintk (" <Maui>");
printk247drivers/sound/maui.cprintk ("Maui: Can't install patch loader\n");
printk134drivers/sound/midi_synth.cprintk ("Midi send timed out\n");
printk248drivers/sound/midi_synth.cprintk ("MIDI%d: Unexpected state %d (%02x)\n", orig_dev, inc->m_state,
printk517drivers/sound/midi_synth.cprintk ("MIDI Error: Invalid patch format (key) 0x%x\n", format);
printk523drivers/sound/midi_synth.cprintk ("MIDI Error: Patch header too short\n");
printk538drivers/sound/midi_synth.cprintk ("MIDI Warning: Sysex record too short (%d<%d)\n",
printk563drivers/sound/midi_synth.cprintk ("Error: Sysex start missing\n");
printk213drivers/sound/midibuf.cprintk ("Sound: FATAL ERROR: Too many midi interfaces\n");
printk219drivers/sound/midibuf.cprintk ("Sound: Nonexistent MIDI interface %d\n", dev);
printk245drivers/sound/midibuf.cprintk ("midi: Can't allocate buffer\n");
printk256drivers/sound/midibuf.cprintk ("midi: Can't allocate buffer\n");
printk480drivers/sound/midibuf.cprintk ("/dev/midi%d: No coprocessor for this device\n", dev);
printk78drivers/sound/mpu401.c{printk("MPU: Invalid buffer pointer %d/%d, s=%d\n", dc->m_ptr, dc->m_left, dc->m_state);dc->m_ptr--;}
printk186drivers/sound/mpu401.cprintk ("<all end>");
printk206drivers/sound/mpu401.cprintk ("<Trk data rq #%d>", midic & 0x0f);
printk210drivers/sound/mpu401.cprintk ("<conductor rq>");
printk224drivers/sound/mpu401.cprintk ("<MPU: Unknown event %02x> ", midic);
printk271drivers/sound/mpu401.cprintk ("Unknown MPU mark %02x\n", midic);
printk298drivers/sound/mpu401.cprintk ("<SYX>");
printk354drivers/sound/mpu401.cprintk ("unknown MIDI sysmsg %0x\n", midic);
printk361drivers/sound/mpu401.cprintk ("MTC frame %x02\n", midic);
printk367drivers/sound/mpu401.cprintk ("<EOX>");
printk371drivers/sound/mpu401.cprintk ("%02x ", midic);
printk399drivers/sound/mpu401.cprintk ("Bad state %d ", devc->m_state);
printk468drivers/sound/mpu401.cprintk ("MPU-401: Bogus interrupt #%d?\n", origirq);
printk504drivers/sound/mpu401.cprintk ("MPU-401: Midi busy\n");
printk519drivers/sound/mpu401.cprintk ("MPU-401: Device not initialized properly\n");
printk531drivers/sound/mpu401.cprintk ("MPU-401: Can't access coprocessor device\n");
printk589drivers/sound/mpu401.cprintk ("MPU-401: Send data timeout\n");
printk613drivers/sound/mpu401.cprintk ("MPU-401 commands not possible in the UART mode\n");
printk632drivers/sound/mpu401.cprintk ("MPU-401: Command (0x%x) timeout\n", (int) cmd->cmd);
printk675drivers/sound/mpu401.cprintk ("MPU: Command (0x%x), parm send failed.\n", (int) cmd->cmd);
printk790drivers/sound/mpu401.cprintk ("MPU-401: Intelligent mode not supported by the HW\n");
printk888drivers/sound/mpu401.cprintk ("MPU-401: Device not initialized properly\n");
printk896drivers/sound/mpu401.cprintk ("MPU-401: Midi busy\n");
printk910drivers/sound/mpu401.cprintk ("MPU-401: Can't access coprocessor device\n");
printk1031drivers/sound/mpu401.cprintk ("MPU-401: Too many midi devices detected\n");
printk1094drivers/sound/mpu401.cprintk ("mpu401: Can't allocate memory\n");
printk1132drivers/sound/mpu401.cprintk (" <MQX-%d%c MIDI Interface>",
printk1150drivers/sound/mpu401.cprintk (" <MPU-401 MIDI Interface %d.%d%c>",
printk1248drivers/sound/mpu401.cprintk ("MPU%d: Can't enter UART mode\n", devc->devno);
printk1265drivers/sound/mpu401.cprintk ("\n\nmpu401.c: I/O port %x already in use\n\n",
printk1288drivers/sound/mpu401.cDDB (printk ("MPU401: Port %x looks dead.\n", hw_config->io_base));
printk1296drivers/sound/mpu401.cDDB (printk ("MPU401: Reset failed on port %x\n", hw_config->io_base));
printk1354drivers/sound/mpu401.cprintk ("MPU: Can't set HW timebase to %d\n", hw_val * 24);
printk1544drivers/sound/mpu401.cprintk ("MPU: Can't set tempo to %d\n", (int) parm);
printk1646drivers/sound/mpu401.cprintk ("MPU: Can't set tempo to %d\n", (int) val);
printk1733drivers/sound/mpu401.cprintk ("<MIDI clk>");
printk1737drivers/sound/mpu401.cprintk ("Ext MIDI start\n");
printk1749drivers/sound/mpu401.cprintk ("Ext MIDI stop\n");
printk1759drivers/sound/mpu401.cprintk ("Ext MIDI continue\n");
printk1769drivers/sound/mpu401.cprintk ("Songpos: %d\n", parm);
printk137drivers/sound/opl3.cprintk ("FM Error: Invalid instrument number %d\n", ins.channel);
printk196drivers/sound/opl3.cprintk ("OPL3: Can't allocate memory for the device control structure\n");
printk330drivers/sound/opl3.cDEB (printk ("Kill note %d\n", voice));
printk363drivers/sound/opl3.cprintk ("FM warning: Invalid patch format field (key) 0x%x\n", instr->key);
printk577drivers/sound/opl3.cprintk (
printk886drivers/sound/opl3.cprintk ("FM Error: Patch record too short\n");
printk894drivers/sound/opl3.cprintk ("FM Error: Invalid instrument number %d\n", ins.channel);
printk930drivers/sound/opl3.cDEB (printk ("Aftertouch %d\n", voice));
printk1180drivers/sound/opl3.cprintk ("OPL3 Error: Too many synthesizers\n");
printk1186drivers/sound/opl3.cprintk ("OPL3: Device control structure not initialized.\n");
printk1225drivers/sound/opl3.cprintk (" <Yamaha OPL4/OPL3 FM>");
printk1227drivers/sound/opl3.cprintk (" <Yamaha OPL-3 FM>");
printk1245drivers/sound/opl3.cprintk (" <Yamaha 2-OP FM>");
printk79drivers/sound/pas2_card.cprintk ("    PAS2: %s.\n", foo);
printk185drivers/sound/pas2_card.cprintk ("PAS2: Invalid IRQ %d", pas_irq);
printk195drivers/sound/pas2_card.cprintk ("PAS2: Invalid IRQ %d", pas_irq);
printk207drivers/sound/pas2_card.cprintk ("PAS2: Invalid DMA selection %d", hw_config->dma);
printk215drivers/sound/pas2_card.cprintk ("PAS2: Invalid DMA selection %d", hw_config->dma);
printk222drivers/sound/pas2_card.cprintk ("pas2_card.c: Can't allocate DMA channel\n");
printk288drivers/sound/pas2_card.cprintk ("\n\nPAS16 Warning: Invalid SB DMA %d\n\n",
printk292drivers/sound/pas2_card.cprintk ("\n\nPAS16 Warning: Invalid SB IRQ %d\n\n",
printk372drivers/sound/pas2_card.cprintk (" <%s rev %d>", pas_model_names[(int) pas_model], pas_read (BOARD_REV_ID));
printk61drivers/sound/pas2_midi.cprintk ("PAS2: Midi busy\n");
printk265drivers/sound/pas2_midi.cprintk ("Sound: Too many midi devices detected\n");
printk330drivers/sound/pas2_midi.cprintk ("MIDI output overrun %x,%x,%d \n", pas_read (MIDI_FIFO_STATUS), stat, ofifo_bytes);
printk140drivers/sound/pas2_mixer.cTRACE (printk ("static int pas_mixer_set(int whichDev = %d, unsigned int level = %X)\n", whichDev, level));
printk252drivers/sound/pas2_mixer.cTRACE (printk ("pas2_mixer.c: void pas_mixer_reset(void)\n"));
printk263drivers/sound/pas2_mixer.cTRACE (printk ("pas2_mixer.c: int pas_mixer_ioctl(unsigned int cmd = %X, unsigned int arg = %X)\n", cmd, arg));
printk159drivers/sound/pas2_pcm.cTRACE (printk ("pas2_pcm.c: static int pas_pcm_ioctl(unsigned int cmd = %X, unsigned int arg = %X)\n", cmd, arg));
printk226drivers/sound/pas2_pcm.cTRACE (printk ("pas2_pcm.c: static void pas_pcm_reset(void)\n"));
printk236drivers/sound/pas2_pcm.cTRACE (printk ("pas2_pcm.c: static int pas_pcm_open(int mode = %X)\n", mode));
printk252drivers/sound/pas2_pcm.cTRACE (printk ("pas2_pcm.c: static void pas_pcm_close(void)\n"));
printk270drivers/sound/pas2_pcm.cTRACE (printk ("pas2_pcm.c: static void pas_pcm_output_block(char *buf = %P, int count = %X)\n", buf, count));
printk320drivers/sound/pas2_pcm.cTRACE (printk ("pas2_pcm.c: static void pas_pcm_start_input(char *buf = %P, int count = %X)\n", buf, count));
printk393drivers/sound/pas2_pcm.cTRACE (printk ("pas2_pcm.c: long pas_pcm_init(long mem_start = %X)\n", mem_start));
printk408drivers/sound/pas2_pcm.cprintk ("PAS2: Too many PCM devices available\n");
printk443drivers/sound/pas2_pcm.cprintk ("PAS: Unexpected PCM interrupt\n");
printk101drivers/sound/patmgr.cprintk ("PATMGR%d: Invalid read count\n", dev);
printk155drivers/sound/patmgr.cprintk ("PATMGR%d: Write count < 4\n", dev);
printk175drivers/sound/patmgr.cprintk ("PATMGR%d: Invalid write count\n", dev);
printk216drivers/sound/patmgr.cprintk ("  PATMGR: Server %d mbox full. Why?\n", dev);
printk284drivers/sound/patmgr.cprintk ("  PATMGR: Server %d mbox full. Why?\n", dev);
printk290drivers/sound/patmgr.cprintk ("pmgr: Couldn't allocate memory for a message\n");
printk108drivers/sound/pss.cprintk ("PSS: I/O port conflict\n");
printk149drivers/sound/pss.cprintk ("PSS: Invalid IRQ %d\n", irq);
printk186drivers/sound/pss.cprintk ("PSS: Invalid DMA %d\n", dma);
printk284drivers/sound/pss.cprintk ("\nPSS: DownLoad timeout problems, byte %d=%d\n",
printk355drivers/sound/pss.cprintk ("pss.c: Can't allocate DMA channel\n");
printk361drivers/sound/pss.cprintk ("PSS: IRQ error\n");
printk367drivers/sound/pss.cprintk ("PSS: DRQ error\n");
printk373drivers/sound/pss.cprintk (" <ECHO-PSS  Rev. %d>", id);
printk388drivers/sound/pss.cprintk ("PSS: MPU I/O port conflict\n");
printk394drivers/sound/pss.cprintk ("PSS: MIDI base error.\n");
printk400drivers/sound/pss.cprintk ("PSS: MIDI IRQ error.\n");
printk406drivers/sound/pss.cprintk ("PSS: Can't enable MPU. MIDI synth microcode not available.\n");
printk412drivers/sound/pss.cprintk ("PSS: Unable to load MIDI synth microcode to DSP.\n");
printk445drivers/sound/pss.cprintk ("PSS: MIDI synth microcode not available.\n");
printk452drivers/sound/pss.cprintk ("PSS: Unable to load MIDI synth microcode to DSP.\n");
printk475drivers/sound/pss.cprintk ("PSS: Unable to load MIDI synth microcode to DSP.\n");
printk488drivers/sound/pss.cprintk ("PSS: Unable to load microcode block to DSP.\n");
printk723drivers/sound/pss.cprintk ("PSS: WSS I/O port conflict\n");
printk729drivers/sound/pss.cprintk ("PSS: WSS base error.\n");
printk735drivers/sound/pss.cprintk ("PSS: WSS IRQ error.\n");
printk741drivers/sound/pss.cprintk ("PSS: WSS DRQ error\n");
printk104drivers/sound/sb16_dsp.cprintk ("SB16 sb_dsp_command01 Timeout\n");
printk111drivers/sound/sb16_dsp.cDEB (printk ("dsp_set_speed(%d)\n", mode));
printk126drivers/sound/sb16_dsp.cDEB (printk ("dsp_set_stereo(%d)\n", mode));
printk136drivers/sound/sb16_dsp.cDEB (printk ("dsp_set_bits(%d)\n", arg));
printk210drivers/sound/sb16_dsp.cDEB (printk ("sb16_dsp_open()\n"));
printk213drivers/sound/sb16_dsp.cprintk ("SB16 Error: SoundBlaster board not installed\n");
printk229drivers/sound/sb16_dsp.cprintk ("SB16: Unable to grab DMA%d\n", dma16);
printk246drivers/sound/sb16_dsp.cDEB (printk ("sb16_dsp_close()\n"));
printk274drivers/sound/sb16_dsp.cprintk ("output_block: %x %d %d\n", buf, count, intrflag);
printk286drivers/sound/sb16_dsp.cprintk ("dmapos=%d %x\n", pos, pos);
printk333drivers/sound/sb16_dsp.cprintk ("start_input: %x %d %d\n", buf, count, intrflag);
printk345drivers/sound/sb16_dsp.cprintk ("dmapos=%d %x\n", pos, pos);
printk478drivers/sound/sb16_dsp.cprintk ("SB16_IRQ_LEVEL %d does not exist\n", level);
printk494drivers/sound/sb16_dsp.cprintk (" <%s>", sb16_dsp_operations.name);
printk504drivers/sound/sb16_dsp.cprintk ("SB16: Unable to grab DMA%d\n", dma8);
printk510drivers/sound/sb16_dsp.cprintk ("SB16: Unable to grab DMA%d\n", dma16);
printk514drivers/sound/sb16_dsp.cprintk ("SB: Too many DSP devices available\n");
printk530drivers/sound/sb16_dsp.cprintk ("SB16 Error: Plain SB not configured\n");
printk547drivers/sound/sb16_dsp.cprintk ("SB16 Error: Invalid DMA channel %d/%d\n",
printk557drivers/sound/sb16_dsp.cDEB (printk ("SoundBlaster 16: IRQ %d DMA %d OK\n", sb_config->irq, hw_config->dma));
printk597drivers/sound/sb16_dsp.cprintk ("SoundBlaster: Unexpected interrupt\n");
printk139drivers/sound/sb16_midi.cprintk ("MPU-401: Timeout\n");
printk228drivers/sound/sb16_midi.cprintk ("Sound: Too many midi devices detected\n");
printk232drivers/sound/sb16_midi.cprintk (" <SoundBlaster MPU-401>");
printk57drivers/sound/sb_card.cprintk ("\n\nsb_dsp.c: I/O port %x already in use\n\n",
printk156drivers/sound/sb_dsp.cprintk ("SoundBlaster: DSP Command(%x) Timeout.\n", val);
printk157drivers/sound/sb_dsp.cprintk ("IRQ conflict???\n");
printk223drivers/sound/sb_dsp.cprintk ("SoundBlaster: Unexpected interrupt\n");
printk315drivers/sound/sb_dsp.cprintk ("SB Warning: High speed DSP not possible simultaneously with MIDI output\n");
printk386drivers/sound/sb_dsp.cprintk ("SB Warning: Stereo DSP not possible simultaneously with MIDI output\n");
printk429drivers/sound/sb_dsp.cprintk ("SB Error: Unable to start (high speed) DAC\n");
printk444drivers/sound/sb_dsp.cprintk ("SB Error: Unable to start DAC\n");
printk458drivers/sound/sb_dsp.cprintk ("SB Error: This device doesn't support recording\n");
printk493drivers/sound/sb_dsp.cprintk ("SB Error: Unable to start (high speed) ADC\n");
printk508drivers/sound/sb_dsp.cprintk ("SB Error: Unable to start ADC\n");
printk626drivers/sound/sb_dsp.cprintk ("SB Error: SoundBlaster board not installed\n");
printk632drivers/sound/sb_dsp.cprintk ("SB Warning: Recording not supported by this device\n");
printk637drivers/sound/sb_dsp.cprintk ("SB: PCM not possible during MIDI input\n");
printk647drivers/sound/sb_dsp.cprintk ("SB Warning: Incorrect IRQ setting %d\n",
printk930drivers/sound/sb_dsp.cprintk ("\nSM Wave: No microcontroller RAM detected (%02x, %02x)\n",
printk943drivers/sound/sb_dsp.cprintk ("\nSM Wave: Invalid microcode (MIDI0001.BIN) length\n");
printk961drivers/sound/sb_dsp.cprintk ("SM Wave: Microcode verification failed\n");
printk1044drivers/sound/sb_dsp.cprintk ("Jazz16: No MPU401 devices configured - MIDI port not initialized\n");
printk1148drivers/sound/sb_dsp.cprintk ("\n\nFailed to get SB version (%x) - possible I/O conflict\n\n",
printk1188drivers/sound/sb_dsp.cprintk ("Hmm... Could this be an ESS488 based card (rev %d)\n",
printk1191drivers/sound/sb_dsp.cprintk ("Hmm... Could this be an ESS688 based card (rev %d)\n",
printk1196drivers/sound/sb_dsp.cprintk ("sb_dsp: Can't allocate IRQ\n");;
printk1203drivers/sound/sb_dsp.cprintk ("\n\n\n\nNOTE! SB Pro support is required with your soundcard!\n\n\n");
printk1241drivers/sound/sb_dsp.cprintk (" <%s>", sb_dsp_operations.name);
printk1255drivers/sound/sb_dsp.cprintk ("sb_dsp.c: Can't allocate DMA channel\n");
printk1264drivers/sound/sb_dsp.cprintk ("Jazz16: Can't allocate 16 bit DMA channel\n");
printk1270drivers/sound/sb_dsp.cprintk ("SB: Too many DSP devices available\n");
printk1272drivers/sound/sb_dsp.cprintk (" <SoundBlaster (configured without audio support)>");
printk78drivers/sound/sb_midi.cprintk ("SB Error: MIDI hardware not installed\n");
printk88drivers/sound/sb_midi.cprintk ("SoundBlaster: Midi input not currently supported\n");
printk102drivers/sound/sb_midi.cprintk ("SB Error: Midi output not possible during stereo or high speed audio\n");
printk161drivers/sound/sb_midi.cprintk ("SB Error: Unable to send a MIDI byte\n");
printk177drivers/sound/sb_midi.cprintk ("SoundBlaster: MIDI input not implemented.\n");
printk248drivers/sound/sb_midi.cprintk ("Sound: Too many midi devices detected\n");
printk579drivers/sound/sb_mixer.cprintk ("SB Warning: Unsupported mixer type\n");
printk274drivers/sound/sequencer.cDEB (printk ("sequencer_write(dev=%d, count=%d)\n", dev, count));
printk313drivers/sound/sequencer.cprintk ("Sequencer: Invalid level 2 event %x\n", ev_code);
printk333drivers/sound/sequencer.cprintk ("Sequencer: 4 byte event in level 2 mode\n");
printk349drivers/sound/sequencer.cprintk ("Sequencer Error: Nonexistent MIDI device %d\n", dev);
printk359drivers/sound/sequencer.cprintk ("Sequencer Error: Unable to open Midi #%d\n", dev);
printk1104drivers/sound/sequencer.cDEB (printk ("sequencer_open(dev=%d)\n", dev));
printk1108drivers/sound/sequencer.cprintk ("Soundcard: Sequencer not initialized\n");
printk1118drivers/sound/sequencer.cprintk ("Patch manager interface is currently broken. Sorry\n");
printk1138drivers/sound/sequencer.cprintk ("Sequencer busy\n");
printk1175drivers/sound/sequencer.cprintk ("sequencer: No timer for level 2\n");
printk1184drivers/sound/sequencer.cprintk ("Sequencer: No Midi devices. Input not possible\n");
printk1207drivers/sound/sequencer.cprintk ("Sequencer: Warning! Cannot open synth device #%d (%d)\n", i, tmp);
printk1209drivers/sound/sequencer.cprintk ("(Maps to MIDI dev #%d)\n", synth_devs[i]->midi_dev);
printk1309drivers/sound/sequencer.cDEB (printk ("sequencer_release(dev=%d)\n", dev));
printk1803drivers/sound/sequencer.cprintk ("patmgr: Can't allocate memory for a message\n");
printk1841drivers/sound/sequencer.cprintk ("patmgr: Can't allocate memory for a message\n");
printk52drivers/sound/sound_pnp.cprintk ("Sound: More than 20 PnP drivers defined\n");
printk64drivers/sound/sound_pnp.cprintk ("CS4232 driver waking up\n");
printk74drivers/sound/sound_pnp.cprintk ("Sound: MSS/WSS device detected but no driver enabled\n");
printk79drivers/sound/sound_pnp.cprintk ("Sound: OPL3/4 device detected but no driver enabled\n");
printk81drivers/sound/sound_pnp.cprintk ("WSS driver %d, OPL3 driver %d\n", wss_driver, opl3_driver);
printk87drivers/sound/sound_pnp.cprintk ("Device activation failed\n");
printk95drivers/sound/sound_pnp.cprintk ("Device activation OK\n");
printk102drivers/sound/sound_pnp.cprintk ("I/O0 %03x\n", wss_base);
printk103drivers/sound/sound_pnp.cprintk ("I/O1 %03x\n", opl3_base);
printk104drivers/sound/sound_pnp.cprintk ("IRQ %d\n", irq);
printk105drivers/sound/sound_pnp.cprintk ("DMA0 %d\n", dma1);
printk106drivers/sound/sound_pnp.cprintk ("DMA1 %d\n", dma2);
printk155drivers/sound/sound_pnp.cprintk ("PnP dev: %08x, %s\n", id,
printk179drivers/sound/sound_pnp.cprintk ("Sound: Can't connect to kernel PnP services.\n");
printk334drivers/sound/sound_switch.cDEB (printk ("sound_read_sw(dev=%d, count=%d)\n", dev, count));
printk363drivers/sound/sound_switch.cprintk ("Sound: Undefined minor device %d\n", dev);
printk373drivers/sound/sound_switch.cDEB (printk ("sound_write_sw(dev=%d, count=%d)\n", dev, count));
printk410drivers/sound/sound_switch.cDEB (printk ("sound_open_sw(dev=%d) : usecount=%d\n", dev, sbc_devices[dev].usecount));
printk414drivers/sound/sound_switch.cprintk ("Invalid minor device %d\n", dev);
printk459drivers/sound/sound_switch.cprintk ("Invalid minor device %d\n", dev);
printk473drivers/sound/sound_switch.cDEB (printk ("sound_release_sw(dev=%d)\n", dev));
printk509drivers/sound/sound_switch.cprintk ("Sound error: Releasing unknown device 0x%02x\n", dev);
printk520drivers/sound/sound_switch.cDEB (printk ("sound_ioctl_sw(dev=%d, cmd=0x%x, arg=0x%x)\n", dev, cmd, arg));
printk113drivers/sound/soundcard.cprintk ("Sound: Driver partially removed. Can't open device\n");
printk122drivers/sound/soundcard.cprintk ("SoundCard Error: The soundcard system has not been configured\n");
printk209drivers/sound/soundcard.cDEB (printk ("sound_select(dev=%d, type=0x%x)\n", dev, sel_type));
printk306drivers/sound/soundcard.cprintk ("Sound warning: IRQ%d was left allocated. Fixed.\n", i);
printk328drivers/sound/soundcard.cprintk ("Sound: Incompatible kernel (wrapper) version\n");
printk346drivers/sound/soundcard.cprintk ("sound: driver already loaded/included in kernel\n");
printk354drivers/sound/soundcard.cprintk ("Sound warning: Deallocation table was too small.\n");
printk366drivers/sound/soundcard.cprintk ("sound: module busy -- remove delayed\n");
printk387drivers/sound/soundcard.cprintk ("Sound: Hmm, DMA%d was left allocated\n", i);
printk416drivers/sound/soundcard.cprintk ("Sound: IRQ%d already in use\n", interrupt_level);
printk454drivers/sound/soundcard.cprintk ("sound_open_dma: DMA channel %d busy or not allocated\n", chn);
printk469drivers/sound/soundcard.cprintk ("sound_free_dma: Bad access to DMA channel %d\n", chn);
printk486drivers/sound/soundcard.cprintk ("sound_close_dma: Bad access to DMA channel %d\n", chn);
printk552drivers/sound/soundcard.cprintk ("sound: buffsize%d %lu\n", dev, audio_devs[dev]->buffsize);
printk582drivers/sound/soundcard.cprintk ("Sound error: Couldn't allocate DMA buffer\n");
printk591drivers/sound/soundcard.cprintk ("sound: start 0x%lx, end 0x%lx\n",
printk600drivers/sound/soundcard.cprintk (
printk649drivers/sound/soundcard.cprintk ("Entered sound_map_buffer()\n");
printk650drivers/sound/soundcard.cprintk ("Exited sound_map_buffer()\n");
printk270drivers/sound/sscape.cprintk ("SNDSCAPE: Setting MT32 mode failed\n");
printk282drivers/sound/sscape.cprintk ("SNDSCAPE: Setting control (%d) failed\n", ctrl);
printk307drivers/sound/sscape.cprintk ("sscapeintr(0x%02x)\n", (bits = sscape_read (devc, GA_INTSTAT_REG)));
printk318drivers/sound/sscape.cprintk ("SSCAPE: Host interrupt, data=%02x\n", host_read (devc));
printk378drivers/sound/sscape.cprintk ("SSCAPE: Tried to use DMA channel  != A. Why?\n");
printk420drivers/sound/sscape.cprintk ("SoundScape: The device is not in the MPU-401 mode\n");
printk592drivers/sound/sscape.cprintk ("SoundScape: The OBP didn't respond after code download\n");
printk625drivers/sound/sscape.cprintk ("SoundScape: OBP Initialization failed.\n");
printk629drivers/sound/sscape.cprintk ("SoundScape board of type %d initialized OK\n",
printk644drivers/sound/sscape.cprintk ("I%d = %02x (new value)\n", i, sscape_read (devc, i));
printk661drivers/sound/sscape.cprintk ("SSCAPE: Unable to load microcode block to the OBP.\n");
printk734drivers/sound/sscape.cprintk ("I%d = %02x\n", i, sscape_read (devc, i));
printk747drivers/sound/sscape.cDEB (printk ("sscape_audio_close(void)\n"));
printk920drivers/sound/sscape.cprintk (" <Ensoniq Soundscape (old)>");
printk923drivers/sound/sscape.cprintk (" <Ensoniq Soundscape>");
printk934drivers/sound/sscape.cprintk ("Invalid IRQ%d\n", hw_config->irq);
printk985drivers/sound/sscape.cprintk ("I%d = %02x (new value)\n", i, sscape_read (devc, i));
printk1017drivers/sound/sscape.cprintk ("Error: Can't allocate IRQ for SoundScape\n");
printk1022drivers/sound/sscape.cprintk ("SoundScape: More than enough audio devices detected\n");
printk1085drivers/sound/sscape.cprintk ("I%d = %02x (old value)\n", i, sscape_read (devc, i));
printk1107drivers/sound/sscape.cprintk ("sscape.c: Can't allocate DMA channel\n");
printk1126drivers/sound/sscape.cprintk ("SoundScape: Invalid initialization order.\n");
printk1138drivers/sound/sscape.cprintk ("SoundScape: Invalid MSS IRQ%d\n", hw_config->irq);
printk1186drivers/sound/sscape.cprintk ("SoundScape: Warning! The WSS mode can't share IRQ with MIDI\n");
printk1208drivers/sound/sscape.cprintk ("I%d = %02x\n", i, sscape_read (devc, i));
printk92drivers/sound/trix.cprintk ("AudioTriX: Config port I/O conflict\n");
printk101drivers/sound/trix.cDDB (printk ("No AudioTriX ASIC signature found\n"));
printk157drivers/sound/trix.cprintk ("AudioTriX: MSS I/O port conflict\n");
printk168drivers/sound/trix.cDDB (printk ("No MSS signature detected on port 0x%x\n", hw_config->io_base));
printk174drivers/sound/trix.cprintk ("AudioTriX: Bad WSS IRQ %d\n", hw_config->irq);
printk180drivers/sound/trix.cprintk ("AudioTriX: Bad WSS DMA %d\n", hw_config->dma);
printk187drivers/sound/trix.cprintk ("AudioTriX: Bad capture DMA %d\n", hw_config->dma2);
printk197drivers/sound/trix.cprintk ("AudioTriX: Can't use DMA0 with a 8 bit card\n");
printk203drivers/sound/trix.cprintk ("AudioTriX: Can't use IRQ%d with a 8 bit card\n", hw_config->irq);
printk227drivers/sound/trix.cDDB (printk ("AudioTriX: Attach called but not probed yet???\n"));
printk238drivers/sound/trix.cprintk ("AudioTriX: Bad IRQ (%d)\n", hw_config->irq);
printk244drivers/sound/trix.cprintk ("[IRQ Conflict?]");
printk294drivers/sound/trix.cprintk ("AudioTriX: SB I/O port conflict\n");
printk333drivers/sound/trix.cprintk (" <AudioTriX (SB)>");
printk357drivers/sound/trix.cDDB (printk ("Trix: WSS and SB modes must be initialized before MPU\n"));
printk363drivers/sound/trix.cDDB (printk ("Trix: SB mode must be initialized before MPU\n"));
printk369drivers/sound/trix.cDDB (printk ("Trix: MPU mode already initialized\n"));
printk375drivers/sound/trix.cprintk ("AudioTriX: MPU I/O port conflict\n");
printk381drivers/sound/trix.cprintk ("AudioTriX: Bad MPU IRQ %d\n", hw_config->irq);
printk387drivers/sound/trix.cprintk ("AudioTriX: Bad MPU IRQ %d\n", hw_config->irq);
printk149drivers/sound/uart6850.cprintk ("Midi6850: Midi busy\n");
printk204drivers/sound/uart6850.cprintk ("Midi6850: Timeout\n");
printk278drivers/sound/uart6850.cprintk ("Sound: Too many midi devices detected\n");
printk301drivers/sound/uart6850.cprintk (" <6850 Midi Interface>");
printk455fs/binfmt_elf.cprintk("Using ELF interpreter %s\n", elf_interpreter);
printk572fs/binfmt_elf.cprintk("Unable to load interpreter\n");
printk666fs/binfmt_elf.cprintk("(start_brk) %x\n" , current->mm->start_brk);
printk667fs/binfmt_elf.cprintk("(end_code) %x\n" , current->mm->end_code);
printk668fs/binfmt_elf.cprintk("(start_code) %x\n" , current->mm->start_code);
printk669fs/binfmt_elf.cprintk("(end_data) %x\n" , current->mm->end_data);
printk670fs/binfmt_elf.cprintk("(start_stack) %x\n" , current->mm->start_stack);
printk671fs/binfmt_elf.cprintk("(brk) %x\n" , current->mm->brk);
printk894fs/binfmt_elf.cprintk("Registers: %s\n", str);
printk899fs/binfmt_elf.cprintk("   %-2d %-5s=%08lx %lu\n", i, regs[i], val, val);
printk986fs/binfmt_elf.cprintk("elf_core_dump: %d segs taking %d bytes\n", segs, size);
printk1072fs/binfmt_elf.cprintk("sizeof(elf_gregset_t) (%d) != sizeof(struct pt_regs) (%d)\n",
printk1200fs/binfmt_elf.cprintk("elf_core_dump: writing %08lx %lx\n", addr, len);
printk1207fs/binfmt_elf.cprintk("elf_core_dump: file.f_pos (%ld) != offset (%ld)\n",
printk201fs/buffer.cprintk("[%d %s %ld] ", nlist,
printk210fs/buffer.cprintk("sys_sync: %d dirty buffers not on dirty list\n", ncount);
printk446fs/buffer.cprintk("VFS: Wrong blocksize on device %s\n",
printk782fs/buffer.cprintk("Attempt to refile free buffer\n");
printk828fs/buffer.cprintk("VFS: brelse: Trying to free free buffer\n");
printk856fs/buffer.cprintk("VFS: bread: READ error on device %s\n",
printk1114fs/buffer.cprintk("VFS: grow_buffers: size = %d\n",size);
printk1318fs/buffer.cif(size) printk("Shrinking buffers of size %d\n", size);
printk1400fs/buffer.cprintk("Buffer memory:   %6dkB\n",buffermem>>10);
printk1401fs/buffer.cprintk("Buffer heads:    %6d\n",nr_buffer_heads);
printk1402fs/buffer.cprintk("Buffer blocks:   %6d\n",nr_buffers);
printk1421fs/buffer.cprintk("Buffer[%d] mem: %d buffers, %d used (last=%d), %d locked, "
printk1425fs/buffer.cprintk("Size    [LAV]     Free  Clean  Unshar     Lck    Lck1   Dirty  Shared \n");
printk1427fs/buffer.cprintk("%5d [%5d]: %7d ", bufferindex_size[isize],
printk1430fs/buffer.cprintk("%7d ", nr_buffers_st[isize][nlist]);
printk1431fs/buffer.cprintk("\n");
printk1699fs/buffer.cprintk("Dirty list empty %d\n", i);
printk1725fs/buffer.cif (ncount) printk("sync_old_buffers: %d dirty buffers not on dirty list\n", ncount);
printk1726fs/buffer.cprintk("Wrote %d/%d buffers\n", nwritten, ndirty);
printk1802fs/buffer.cprintk("bdflush() activated...");
printk1822fs/buffer.cprintk("Dirty list empty %d\n", i);
printk1848fs/buffer.cif (ncount) printk("sys_bdflush: %d dirty buffers not on dirty list\n", ncount);
printk1849fs/buffer.cprintk("sleeping again.\n");
printk155fs/devices.cprintk(KERN_DEBUG "VFS: Disk change detected on device %s\n",
printk306fs/dquot.cprintk("VFS: dquot busy on removed device %s\n", kdevname(dev));
printk460fs/dquot.cprintk("VFS: dqput: trying to free free dquot\n");
printk461fs/dquot.cprintk("VFS: device %s, dquot of %s %d\n", kdevname(dquot->dq_dev),
printk512fs/dquot.cprintk("VFS: No free dquots - contact mvw@mcs.ow.org\n");
printk530fs/dquot.cprintk ("VFS: get_empty_dquot: bad free dquot count.\n");
printk889fs/dquot.cprintk("VFS: Diskquotas version %s initialized\r\n", __DQUOT_VERSION__);
printk844fs/exec.cprintk(KERN_NOTICE "N_TXTOFF != BLOCK_SIZE. See a.out.h.\n");
printk850fs/exec.cprintk(KERN_NOTICE "N_TXTOFF < BLOCK_SIZE. Please convert binary.\n");
printk895fs/exec.cprintk(KERN_NOTICE "executable not page aligned\n");
printk1003fs/exec.cprintk("N_TXTOFF < BLOCK_SIZE. Please convert library\n");
printk99fs/ext/dir.cprintk ("ext_readdir: bad dir entry, skipping\n");
printk100fs/ext/dir.cprintk ("dev=%s, dir=%ld, "
printk85fs/ext/file.cprintk("ext_file_read: inode = NULL\n");
printk89fs/ext/file.cprintk("ext_file_read: mode = %07o\n",inode->i_mode);
printk207fs/ext/file.cprintk("ext_file_write: inode = NULL\n");
printk211fs/ext/file.cprintk("ext_file_write: mode = %07o\n",inode->i_mode);
printk46fs/ext/freelists.cprintk("trying to free block on non-existent device\n");
printk52fs/ext/freelists.cprintk("trying to free block not in datazone\n");
printk63fs/ext/freelists.cprintk("ext_free_block: block full, skipping to %d\n", block);
printk91fs/ext/freelists.cprintk("trying to get new block from non-existent device\n");
printk103fs/ext/freelists.cprintk("ext_new_block: block empty, skipping to %d\n", efb->next);
printk118fs/ext/freelists.cprintk ("ext_new_block: blk = %d\n", j);
printk119fs/ext/freelists.cprintk("allocating block not in data zone\n");
printk126fs/ext/freelists.cprintk("new_block: cannot get block");
printk134fs/ext/freelists.cprintk("ext_new_block: allocating block %d\n", j);
printk156fs/ext/freelists.cprintk ("ext_count_free: error while reading free blocks list\n");
printk166fs/ext/freelists.cprintk("ext_count_free_blocks: stored = %d, computed = %d\n",
printk187fs/ext/freelists.cprintk("free_inode: inode has no device\n");
printk191fs/ext/freelists.cprintk("free_inode: inode has count=%d\n",inode->i_count);
printk195fs/ext/freelists.cprintk("free_inode: inode has nlink=%d\n",inode->i_nlink);
printk199fs/ext/freelists.cprintk("free_inode: inode on non-existent device\n");
printk208fs/ext/freelists.cprintk("free_inode: inode 0 or non-existent inode\n");
printk217fs/ext/freelists.cprintk("ext_free_inode: inode full, skipping to %d\n", ino);
printk262fs/ext/freelists.cprintk("ext_free_inode: inode empty, skipping to %d\n", efi->next);
printk266fs/ext/freelists.cprintk ("efi->next = %ld\n", efi->next);
printk294fs/ext/freelists.cprintk("ext_new_inode : allocating inode %d\n", inode->i_ino);
printk317fs/ext/freelists.cprintk ("u.ext_sb.s_firstfreeinodenumber = %d, ino = %d\n", 
printk323fs/ext/freelists.cprintk ("ext_count_free_inodes: error while reading free inodes list\n");
printk334fs/ext/freelists.cprintk("ext_count_free_inodes: stored = %d, computed = %d\n",
printk74fs/ext/inode.cprintk("EXT-fs: unable to read superblock\n");
printk96fs/ext/inode.cprintk("VFS: Can't find an extfs filesystem on dev "
printk106fs/ext/inode.cprintk("ext_read_super: unable to read first free block\n");
printk117fs/ext/inode.cprintk("ext_read_super: unable to read first free inode block\n");
printk131fs/ext/inode.cprintk("EXT-fs: get root inode failed\n");
printk144fs/ext/inode.cprintk ("ext_write_super: bread failed\n");
printk190fs/ext/inode.cprintk("ext_bmap: block<0");
printk194fs/ext/inode.cprintk("ext_bmap: block>big");
printk317fs/ext/inode.cprintk("ext_getblk: block<0\n");
printk321fs/ext/inode.cprintk("ext_getblk: block>big\n");
printk442fs/ext/inode.cprintk ("IO error syncing ext inode ["
printk120fs/ext/namei.cprintk ("ext_find_entry: bad dir entry\n");
printk121fs/ext/namei.cprintk ("dev=%s, dir=%ld, offset=%ld, "
printk219fs/ext/namei.cprintk ("ext_add_entry: skipping to next block\n");
printk251fs/ext/namei.cprintk ("ext_add_entry : creating next block\n");
printk270fs/ext/namei.cprintk ("ext_addr_entry: bad dir entry\n");
printk271fs/ext/namei.cprintk ("dev=%s, dir=%ld, offset=%ld, "
printk478fs/ext/namei.cprintk("warning - bad directory on dev %s\n",
printk486fs/ext/namei.cprintk("warning - bad directory on dev %s\n",
printk504fs/ext/namei.cprintk ("empty_dir: bad dir entry\n");
printk505fs/ext/namei.cprintk ("dev=%s, dir=%ld, offset=%ld, "
printk568fs/ext/namei.cprintk("empty directory has nlink!=2 (%d)\n",inode->i_nlink);
printk608fs/ext/namei.cprintk("Deleting nonexistent file (%s:%ld), %d\n",
printk251fs/ext/truncate.cprintk("ext_release not implemented\n");
printk183fs/ext2/balloc.cprintk ("ext2_free_blocks: nonexistent device");
printk274fs/ext2/balloc.cprintk ("ext2_new_block: nonexistent device");
printk517fs/ext2/balloc.cprintk ("group %d: stored = %d, counted = %lu\n",
printk521fs/ext2/balloc.cprintk("ext2_count_free_blocks: stored = %lu, computed = %lu, %lu\n",
printk97fs/ext2/file.cprintk ("ext2_file_read: inode = NULL\n");
printk249fs/ext2/file.cprintk("ext2_file_write: inode = NULL\n");
printk203fs/ext2/ialloc.cprintk ("ext2_free_inode: inode has no device\n");
printk207fs/ext2/ialloc.cprintk ("ext2_free_inode: inode has count=%d\n",
printk212fs/ext2/ialloc.cprintk ("ext2_free_inode: inode has nlink=%d\n",
printk217fs/ext2/ialloc.cprintk("ext2_free_inode: inode on nonexistent device\n");
printk524fs/ext2/ialloc.cprintk ("group %d: stored = %d, counted = %lu\n",
printk528fs/ext2/ialloc.cprintk("ext2_count_free_inodes: stored = %lu, computed = %lu, %lu\n",
printk663fs/ext2/inode.cprintk ("IO error syncing ext2 inode ["
printk54fs/ext2/super.cprintk (KERN_CRIT "EXT2-fs error (device %s): %s: %s\n",
printk59fs/ext2/super.cprintk ("Remounting filesystem read-only\n");
printk90fs/ext2/super.cprintk (KERN_WARNING "EXT2-fs warning (device %s): %s: %s\n",
printk167fs/ext2/super.cprintk ("EXT2-fs: Invalid check option: %s\n",
printk176fs/ext2/super.cprintk ("EXT2-fs: the errors option requires "
printk196fs/ext2/super.cprintk ("EXT2-fs: Invalid errors option: %s\n",
printk215fs/ext2/super.cprintk ("EXT2-fs: the resgid option requires "
printk221fs/ext2/super.cprintk ("EXT2-fs: Invalid resgid option: %s\n",
printk228fs/ext2/super.cprintk ("EXT2-fs: the resuid option requires "
printk234fs/ext2/super.cprintk ("EXT2-fs: Invalid resuid option: %s\n",
printk241fs/ext2/super.cprintk ("EXT2-fs: the sb option requires "
printk247fs/ext2/super.cprintk ("EXT2-fs: Invalid sb option: %s\n",
printk259fs/ext2/super.cprintk ("EXT2-fs: Unrecognized mount option %s\n", this_char);
printk270fs/ext2/super.cprintk ("EXT2-fs warning: revision level too high, "
printk276fs/ext2/super.cprintk ("EXT2-fs warning: mounting unchecked fs, "
printk279fs/ext2/super.cprintk ("EXT2-fs warning: mounting fs with errors, "
printk283fs/ext2/super.cprintk ("EXT2-fs warning: maximal mount count reached, "
printk287fs/ext2/super.cprintk ("EXT2-fs warning: checktime reached, "
printk297fs/ext2/super.cprintk ("[EXT II FS %s, %s, bs=%lu, fs=%lu, gc=%lu, "
printk387fs/ext2/super.cprintk ("EXT2-fs: unable to read superblock\n");
printk403fs/ext2/super.cprintk ("VFS: Can't find an ext2 filesystem on dev "
printk429fs/ext2/super.cprintk ("EXT2-fs: Magic mismatch, very weird !\n");
printk473fs/ext2/super.cprintk ("VFS: Can't find an ext2 filesystem on dev "
printk484fs/ext2/super.cprintk ("VFS: Unsupported blocksize on dev "
printk494fs/ext2/super.cprintk ("EXT2-fs: fragsize %lu != blocksize %lu (not supported yet)\n",
printk504fs/ext2/super.cprintk ("EXT2-fs: #blocks per group too big: %lu\n",
printk513fs/ext2/super.cprintk ("EXT2-fs: #fragments per group too big: %lu\n",
printk522fs/ext2/super.cprintk ("EXT2-fs: #inodes per group too big: %lu\n",
printk539fs/ext2/super.cprintk ("EXT2-fs: not enough memory\n");
printk554fs/ext2/super.cprintk ("EXT2-fs: unable to read group descriptors\n");
printk567fs/ext2/super.cprintk ("EXT2-fs: group descriptors corrupted !\n");
printk594fs/ext2/super.cprintk ("EXT2-fs: get root inode failed\n");
printk168fs/fcntl.cprintk("kill_fasync: bad magic number in "
printk114fs/filesystems.cprintk(KERN_ERR "Root-NFS: Unable to contact NFS server for root fs, using /dev/fd0 instead\n");
printk361fs/hpfs/hpfs_fs.cprintk("HPFS: syntax error in mount options.  Not mounted.\n");
printk402fs/hpfs/hpfs_fs.cprintk("HPFS: hpfs_read_super: Not HPFS\n");
printk443fs/hpfs/hpfs_fs.cprintk("HPFS: Proceeding, but operation may be unreliable\n");
printk493fs/hpfs/hpfs_fs.cprintk("HPFS: hpfs_read_super: inode get failed\n");
printk507fs/hpfs/hpfs_fs.cprintk("HPFS: "
printk538fs/hpfs/hpfs_fs.cprintk("HPFS: %s %s. Please %s\n", p1, p2, p3);
printk645fs/hpfs/hpfs_fs.cprintk("HPFS: read_inode: bad ino\n");
printk705fs/hpfs/hpfs_fs.cprintk("HPFS: read_inode: no fnode\n");
printk844fs/hpfs/hpfs_fs.cprintk("HPFS: bit map pointer missing\n");
printk1102fs/hpfs/hpfs_fs.cprintk("HPFS: bplus_lookup: sector not found\n");
printk1612fs/hpfs/hpfs_fs.cprintk("HPFS: missing fnode\n");
printk1619fs/hpfs/hpfs_fs.cprintk("HPFS: map_fnode: bad fnode pointer\n");
printk1634fs/hpfs/hpfs_fs.cprintk("HPFS: missing anode\n");
printk1641fs/hpfs/hpfs_fs.cprintk("HPFS: map_anode: bad anode pointer\n");
printk1656fs/hpfs/hpfs_fs.cprintk("HPFS: missing dnode\n");
printk1663fs/hpfs/hpfs_fs.cprintk("HPFS: map_dnode: bad dnode pointer\n");
printk1679fs/hpfs/hpfs_fs.cprintk("HPFS: map_sector: read error\n");
printk1693fs/hpfs/hpfs_fs.cprintk("HPFS: map_4sectors: unaligned read\n");
printk1732fs/hpfs/hpfs_fs.cprintk("HPFS: map_4sectors: read error\n");
printk356fs/inode.cprintk("VFS: inode busy on removed device %s\n",
printk385fs/inode.cprintk("VFS: iput: trying to free free inode\n");
printk386fs/inode.cprintk("VFS: device %s, inode %lu, mode=0%07o\n",
printk424fs/inode.cprintk("iput: inode %lu on device %s still has mappings.\n",
printk471fs/inode.cprintk("VFS: No free inodes - contact Linus\n");
printk494fs/inode.cprintk ("VFS: get_empty_inode: bad free inode count.\n");
printk566fs/inode.cprintk("Whee.. inode changed from under us. Tell Linus\n");
printk134fs/isofs/dir.cprintk("Block, offset, f_pos: %x %x %x\n",
printk130fs/isofs/file.cprintk("isofs_file_read: inode = NULL\n");
printk134fs/isofs/file.cprintk("isofs_file_read: mode = %07o\n",inode->i_mode);
printk38fs/isofs/inode.cprintk("Outstanding mallocs:%d, outstanding buffers: %d\n", 
printk182fs/isofs/inode.cprintk("isofs.inode: CDROMMULTISESSION: rc=%d\n",i);
printk185fs/isofs/inode.cprintk("isofs.inode: XA disk: %s\n", ms_info.xa_flag ? "yes":"no");
printk186fs/isofs/inode.cprintk("isofs.inode: vol_desc_start = %d\n", ms_info.addr.lba);
printk223fs/isofs/inode.cprintk("map = %c\n", opt.map);
printk224fs/isofs/inode.cprintk("rock = %c\n", opt.rock);
printk225fs/isofs/inode.cprintk("check = %c\n", opt.check);
printk226fs/isofs/inode.cprintk("cruft = %c\n", opt.cruft);
printk227fs/isofs/inode.cprintk("unhide = %c\n", opt.unhide);
printk228fs/isofs/inode.cprintk("conversion = %c\n", opt.conversion);
printk229fs/isofs/inode.cprintk("blocksize = %d\n", opt.blocksize);
printk230fs/isofs/inode.cprintk("gid = %d\n", opt.gid);
printk231fs/isofs/inode.cprintk("uid = %d\n", opt.uid);
printk252fs/isofs/inode.cprintk("isofs.inode: iso_blknum=%d\n", iso_blknum);
printk256fs/isofs/inode.cprintk("isofs_read_super: bread failed, dev "
printk295fs/isofs/inode.cprintk("Unable to identify CD-ROM format.\n");
printk306fs/isofs/inode.cprintk("Multi-volume disks not (yet) supported.\n");
printk315fs/isofs/inode.cprintk("Multi-volume disks not (yet) supported.\n");
printk333fs/isofs/inode.cprintk("Bad logical zone size %ld\n", s -> u.isofs_sb.s_log_zone_size);
printk352fs/isofs/inode.cprintk(KERN_DEBUG "Max size:%ld   Log zone size:%ld\n",
printk355fs/isofs/inode.cprintk(KERN_DEBUG "First datazone:%ld   Root inode number %d\n",
printk358fs/isofs/inode.cif(high_sierra) printk(KERN_DEBUG "Disc in High Sierra format.\n");
printk384fs/isofs/inode.cprintk("get root inode failed\n");
printk419fs/isofs/inode.cprintk("_isofs_bmap: block<0");
printk439fs/isofs/inode.cprintk("unable to read i-node block");
printk455fs/isofs/inode.cprintk(KERN_INFO "NoMem ISO inode %lu\n",inode->i_ino);
printk463fs/isofs/inode.cprintk("unable to read i-node block");
printk498fs/isofs/inode.cprintk("Warning: defective cdrom.  Enabling \"cruft\" mount option.\n");
printk513fs/isofs/inode.cprintk("Interleaved files not (yet) supported.\n");
printk520fs/isofs/inode.cprintk("File unit size != 0 for ISO file (%ld).\n",inode->i_ino);
printk527fs/isofs/inode.cprintk("Unusual flag settings for ISO file (%ld %x).\n",
printk533fs/isofs/inode.cprintk("Get inode %d: %d %d: %d\n",inode->i_ino, block, 
printk567fs/isofs/inode.cprintk("Inode: %x extent: %x\n",inode->i_ino, inode->u.isofs_i.i_first_extent);
printk584fs/isofs/inode.cprintk("Warning: defective cdrom.  Enabling \"cruft\" mount option.\n");
printk590fs/isofs/inode.cprintk("Multi volume CD somehow got mounted.\n");
printk671fs/isofs/inode.cprintk(".. Directory not in first block"
printk686fs/isofs/inode.cprintk("Parent dir:%x\n",parent_dir);
printk769fs/isofs/inode.cprintk("Resultant Inode %d\n",result);
printk45fs/isofs/namei.cif (len <= 2) printk("Match: %d %d %s %d %d \n",len,dlen,compare,de->name[0], dlen);
printk142fs/isofs/namei.cprintk("Doing .. (%d %d)",
printk202fs/isofs/namei.cprintk("Backlink not properly set.\n");
printk225fs/isofs/namei.cprintk("lookup: %x %d\n",dir->i_ino, len);
printk69fs/isofs/rock.cif(!bh) {printk("Unable to read continuation Rock Ridge record\n"); \
printk91fs/isofs/rock.cprintk("Unable to read rock-ridge attributes\n");    \
printk139fs/isofs/rock.cprintk("RR: CL\n");
printk148fs/isofs/rock.cprintk("RR: PL\n");
printk207fs/isofs/rock.cprintk("Unsupported NM flag settings (%d)\n",rr->u.NM.flags);
printk231fs/isofs/rock.cprintk("RR: RE (%x)\n", inode->i_ino);
printk289fs/isofs/rock.cprintk("ISO9660 Extensions: ");
printk291fs/isofs/rock.cfor(p=0;p<rr->u.ER.len_id;p++) printk("%c",rr->u.ER.data[p]);
printk293fs/isofs/rock.cprintk("\n");
printk355fs/isofs/rock.cprintk("Symlink component flag not implemented\n");
printk366fs/isofs/rock.cprintk("Attempt to read inode for relocated directory\n");
printk370fs/isofs/rock.cprintk("RR CL (%x)\n",inode->i_ino);
printk426fs/isofs/rock.cprintk("unable to read i-node block");
printk445fs/isofs/rock.cprintk("unable to read i-node block");
printk502fs/isofs/rock.cprintk("Symlink component flag not implemented (%d)\n",slen);
printk362fs/locks.cprintk("locks_conflict(): impossible lock type - %d\n",
printk52fs/minix/bitmap.cprintk("trying to free block on nonexistent device\n");
printk57fs/minix/bitmap.cprintk("trying to free block not in datazone\n");
printk69fs/minix/bitmap.cprintk("minix_free_block: nonexistent bitmap buffer\n");
printk73fs/minix/bitmap.cprintk("free_block (%s:%d): bit already cleared\n",
printk85fs/minix/bitmap.cprintk("trying to get new block from nonexistent device\n");
printk97fs/minix/bitmap.cprintk("new_block: bit already set");
printk106fs/minix/bitmap.cprintk("new_block: cannot get block");
printk130fs/minix/bitmap.cprintk("free_inode: inode has no device\n");
printk134fs/minix/bitmap.cprintk("free_inode: inode has count=%d\n",inode->i_count);
printk138fs/minix/bitmap.cprintk("free_inode: inode has nlink=%d\n",inode->i_nlink);
printk142fs/minix/bitmap.cprintk("free_inode: inode on nonexistent device\n");
printk146fs/minix/bitmap.cprintk("free_inode: inode 0 or nonexistent inode\n");
printk151fs/minix/bitmap.cprintk("free_inode: nonexistent imap in superblock\n");
printk156fs/minix/bitmap.cprintk("free_inode: bit %lu already cleared.\n",ino);
printk182fs/minix/bitmap.cprintk("new_inode: bit already set");
printk79fs/minix/file.cprintk("minix_file_read: inode = NULL\n");
printk83fs/minix/file.cprintk("minix_file_read: mode = %07o\n",inode->i_mode);
printk199fs/minix/file.cprintk("minix_file_write: inode = NULL\n");
printk203fs/minix/file.cprintk("minix_file_write: mode = %07o\n",inode->i_mode);
printk108fs/minix/inode.cprintk ("MINIX-fs warning: remounting unchecked fs, "
printk111fs/minix/inode.cprintk ("MINIX-fs warning: remounting fs with errors, "
printk134fs/minix/inode.cprintk("MINIX-fs: unable to read superblock\n");
printk163fs/minix/inode.cprintk("VFS: Can't find a minix filesystem on dev "
printk191fs/minix/inode.cprintk("MINIX-fs: bad superblock or unable to read bitmaps\n");
printk205fs/minix/inode.cprintk("MINIX-fs: get root inode failed\n");
printk215fs/minix/inode.cprintk ("MINIX-fs: mounting unchecked file system, "
printk218fs/minix/inode.cprintk ("MINIX-fs: mounting file system with errors, "
printk256fs/minix/inode.cprintk("minix_bmap: block<0");
printk260fs/minix/inode.cprintk("minix_bmap: block>big");
printk370fs/minix/inode.cprintk("minix_getblk: block<0");
printk374fs/minix/inode.cprintk("minix_getblk: block>big");
printk415fs/minix/inode.cprintk("Bad inode number on dev %s"
printk424fs/minix/inode.cprintk("Major problem: unable to read inode from dev "
printk464fs/minix/inode.cprintk("Bad inode number on dev %s"
printk473fs/minix/inode.cprintk("unable to read i-node block\n");
printk513fs/minix/inode.cprintk ("IO error syncing minix inode ["
printk425fs/minix/namei.cprintk("Bad directory on device %s\n",
printk470fs/minix/namei.cprintk("empty directory has nlink!=2 (%d)\n",inode->i_nlink);
printk521fs/minix/namei.cprintk("Deleting nonexistent file (%s:%lu), %d\n",
printk34fs/msdos/fat.cprintk("bread in fat_access failed\n");
printk43fs/msdos/fat.cprintk("bread in fat_access failed\n");
printk124fs/msdos/fat.cprintk("cache lookup: <%s,%d> %d (%d,%d) -> ", kdevname(inode->i_dev),
printk134fs/msdos/fat.cprintk("cache hit: %d (%d)\n",walk->file_cluster,*d_clu);
printk139fs/msdos/fat.cprintk("cache miss\n");
printk151fs/msdos/fat.cprintk("<%s,%d>(%d,%d) ", kdevname(walk->device),
printk153fs/msdos/fat.celse printk("-- ");
printk155fs/msdos/fat.cprintk("\n");
printk165fs/msdos/fat.cprintk("cache add: <%s,%d> %d (%d)\n", kdevname(inode->i_dev),
printk174fs/msdos/fat.cprintk("FAT cache corruption");
printk273fs/msdos/fat.cprintk("fat_free: skipped EOF\n");
printk27fs/msdos/file.c#define Printk(x) printk x
printk168fs/msdos/file.cprintk("msdos_file_read: inode = NULL\n");
printk173fs/msdos/file.cprintk("msdos_file_read: mode = %07o\n",inode->i_mode);
printk282fs/msdos/file.cprintk("msdos_file_write: inode = NULL\n");
printk287fs/msdos/file.cprintk("msdos_file_write: mode = %07o\n",inode->i_mode);
printk41fs/msdos/inode.cprintk("Invalid link (0x%p): expected 0x%p, got 0x%p\n",
printk157fs/msdos/inode.cprintk ("MSDOS FS: Invalid blocksize (512 or 1024)\n");
printk185fs/msdos/inode.cprintk ("MSDOS: Hardware sector size is %d\n",blksize);
printk205fs/msdos/inode.cprintk("MSDOS bread failed\n");
printk270fs/msdos/inode.cprintk("[MS-DOS FS Rel. 12,FAT %d,check=%c,conv=%c,"
printk274fs/msdos/inode.cprintk("[me=0x%x,cs=%d,#f=%d,fs=%d,fl=%d,ds=%d,de=%d,data=%d,"
printk280fs/msdos/inode.cprintk ("Transaction block size = %d\n",blksize);
printk286fs/msdos/inode.cprintk("VFS: Can't find a valid MSDOS filesystem on dev "
printk308fs/msdos/inode.cprintk("get root inode failed\n");
printk391fs/msdos/inode.cprintk("dev = %s, ino = %ld\n",
printk406fs/msdos/inode.cprintk("directory %d: i_nlink == 0\n",inode->i_ino);
printk416fs/msdos/inode.cprintk("Directory %ld: bad FAT\n",
printk457fs/msdos/inode.cprintk("dev = %s, ino = %ld\n",
printk18fs/msdos/misc.c#define Printk(x)  printk x
printk42fs/msdos/misc.cprintk("Filesystem panic (dev %s, ", kdevname(s->s_dev));
printk43fs/msdos/misc.cprintk("mounted on %s:%ld)\n  %s\n", /* note: kdevname returns & static char[] */
printk46fs/msdos/misc.cprintk("  File system has been set read-only\n");
printk69fs/msdos/misc.cprintk("Invalid conversion mode - defaulting to "
printk134fs/msdos/misc.cprintk("free cluster: %d\n",nr);
printk149fs/msdos/misc.cprintk("set to %x\n",fat_access(inode->i_sb,nr,-1));
printk178fs/msdos/misc.cprintk("last = %d\n",last);
printk186fs/msdos/misc.cif (last) printk("next set to %d\n",fat_access(inode->i_sb,last,-1));
printk192fs/msdos/misc.cprintk("zeroing sector %d\n",sector);
printk195fs/msdos/misc.cprintk("getblk failed\n");
printk204fs/msdos/misc.cprintk ("file_cluster badly computed!!! %d <> %ld\n"
printk218fs/msdos/misc.cprintk("size is %d now (%x)\n",inode->i_size,inode);
printk302fs/msdos/misc.cprintk("Directory sread (sector %d) failed\n",sector);
printk439fs/msdos/misc.cprintk("raw_scan_nonroot: start=%d\n",start);
printk453fs/msdos/misc.cprintk("next start: %d\n",start);
printk64fs/msdos/mmap.cprintk ("MSDOS: Error while reading an mmap file %d <> %d\n"
printk291fs/msdos/namei.cprintk("[");
printk293fs/msdos/namei.cprintk("%d ",start);
printk296fs/msdos/namei.cprintk("ERROR");
printk301fs/msdos/namei.cprintk("]\n");
printk102fs/nfs/dir.cprintk("nfs_readdir: inode is NULL or not a directory\n");
printk112fs/nfs/dir.cprintk("nfs_readdir: no MEMORY for cache\n");
printk119fs/nfs/dir.cprintk("nfs_readdir: no MEMORY for cache\n");
printk339fs/nfs/dir.cprintk("nfs_lookup: inode is NULL or not a directory\n");
printk380fs/nfs/dir.cprintk("nfs_create: inode is NULL or not a directory\n");
printk414fs/nfs/dir.cprintk("nfs_mknod: inode is NULL or not a directory\n");
printk445fs/nfs/dir.cprintk("nfs_mkdir: inode is NULL or not a directory\n");
printk469fs/nfs/dir.cprintk("nfs_rmdir: inode is NULL or not a directory\n");
printk489fs/nfs/dir.cprintk("nfs_unlink: inode is NULL or not a directory\n");
printk511fs/nfs/dir.cprintk("nfs_symlink: inode is NULL or not a directory\n");
printk538fs/nfs/dir.cprintk("nfs_link: old inode is NULL\n");
printk544fs/nfs/dir.cprintk("nfs_link: dir is NULL or not a directory\n");
printk569fs/nfs/dir.cprintk("nfs_rename: old inode is NULL or not a directory\n");
printk575fs/nfs/dir.cprintk("nfs_rename: new inode is NULL or not a directory\n");
printk608fs/nfs/dir.cprintk("nfs_refresh_inode: inode or fattr is NULL\n");
printk612fs/nfs/dir.cprintk("nfs_refresh_inode: inode number mismatch\n");
printk105fs/nfs/file.cprintk("nfs_file_read: inode = NULL\n");
printk109fs/nfs/file.cprintk("nfs_file_read: read from non-file, mode %07o\n",
printk198fs/nfs/file.cprintk("nfs_file_write: inode = NULL\n");
printk202fs/nfs/file.cprintk("nfs_file_write: write to non-file, mode %07o\n",
printk83fs/nfs/inode.cprintk("nfs_read_super: missing data argument\n");
printk90fs/nfs/inode.cprintk("nfs warning: mount version %s than kernel\n",
printk94fs/nfs/inode.cprintk("nfs_read_super: invalid file descriptor\n");
printk100fs/nfs/inode.cprintk("nfs_read_super: not a socket\n");
printk140fs/nfs/inode.cprintk("NFS: Error passed unconnected socket and no address\n") ;
printk162fs/nfs/inode.cprintk("NFS: cannot create RPC socket.\n");
printk171fs/nfs/inode.cprintk("nfs_read_super: get root inode failed\n");
printk187fs/nfs/inode.cprintk("nfs_statfs: statfs error = %d\n", -error);
printk218fs/nfs/inode.cprintk("nfs_fhget: super block is NULL\n");
printk225fs/nfs/inode.cprintk("nfs_fhget: getattr error = %d\n", -error);
printk231fs/nfs/inode.cprintk("nfs_fhget: iget failed\n");
printk236fs/nfs/inode.cprintk("nfs_fhget: unexpected inode from iget\n");
printk122fs/nfs/nfsroot.cprintk(KERN_ERR "NFS: Unable to open at least one network device\n");
printk126fs/nfs/nfsroot.cprintk(KERN_NOTICE "NFS: Opened %d network interfaces\n", num);
printk292fs/nfs/nfsroot.cprintk(KERN_NOTICE "NFS: Sending RARP request...\n");
printk305fs/nfs/nfsroot.cprintk(KERN_ERR "NFS: Couldn't find device to send RARP request to\n");
printk342fs/nfs/nfsroot.cprintk(KERN_ERR "NFS: Timed out while waiting for RARP answer\n");
printk345fs/nfs/nfsroot.cprintk(KERN_NOTICE "NFS: ");
printk346fs/nfs/nfsroot.cprintk("Got RARP answer from %s, ", in_ntoa(server.sin_addr.s_addr));
printk347fs/nfs/nfsroot.cprintk("my address is %s\n", in_ntoa(myaddr.sin_addr.s_addr));
printk435fs/nfs/nfsroot.cprintk(KERN_ERR "NFS: Pathname for remote directory too long\n");
printk486fs/nfs/nfsroot.cprintk(KERN_NOTICE "NFS: Mounting %s on server %s as root\n",
printk488fs/nfs/nfsroot.cprintk(KERN_NOTICE "NFS:     rsize = %d, wsize = %d, timeo = %d, retrans = %d\n",
printk490fs/nfs/nfsroot.cprintk(KERN_NOTICE "NFS:     acreg (min,max) = (%d,%d), acdir (min,max) = (%d,%d)\n",
printk493fs/nfs/nfsroot.cprintk(KERN_NOTICE "NFS:     port = %d, flags = %08x\n",
printk527fs/nfs/nfsroot.cprintk(KERN_NOTICE "NFS: IP address num %d is \"%s\"\n", num, ip);
printk643fs/nfs/nfsroot.cprintk(KERN_ERR "NFS: Unable to find routing to server\n");
printk691fs/nfs/nfsroot.cprintk(KERN_ERR "NFS: Cannot open UDP socket\n");
printk768fs/nfs/nfsroot.cprintk(KERN_ERR "NFS: Cannot find a suitable listening port\n");
printk773fs/nfs/nfsroot.cprintk(KERN_NOTICE "NFS: Binding to listening port %d\n", port);
printk844fs/nfs/nfsroot.cprintk(KERN_ERR "NFS: Cannot allocate UDP buffer\n");
printk888fs/nfs/nfsroot.cprintk(KERN_ERR "NFS: Unable to get nfsd port number from server, using default\n");
printk893fs/nfs/nfsroot.cprintk(KERN_NOTICE "NFS: Portmapper on server returned %d as nfsd port\n", port);
printk897fs/nfs/nfsroot.cprintk(KERN_ERR "NFS: Unable to get mountd port number from server, using default\n");
printk902fs/nfs/nfsroot.cprintk(KERN_NOTICE "NFS: Portmapper on server returned %d as mountd port\n", port);
printk939fs/nfs/nfsroot.cprintk(KERN_NOTICE "NFS: ");
printk940fs/nfs/nfsroot.cprintk("Got file handle for %s via RPC\n", nfs_path);
printk942fs/nfs/nfsroot.cprintk(KERN_ERR "NFS: Server returned error %d while mounting %s\n",
printk53fs/nfs/proc.cprintk(format , ## args);  \
printk358fs/nfs/proc.cprintk("nfs_proc_readlink: giant pathname\n");
printk401fs/nfs/proc.cprintk("nfs_proc_read: giant data size\n"); 
printk756fs/nfs/proc.cprintk("nfs_proc_readdir: giant filename\n");
printk870fs/nfs/proc.cprintk("nfs_rpc_verify: not an RPC reply: %d\n", n);
printk874fs/nfs/proc.cprintk("nfs_rpc_verify: RPC call rejected: %d\n", n);
printk881fs/nfs/proc.cprintk("nfs_rpc_verify: bad RPC authentication type: %d\n", n);
printk885fs/nfs/proc.cprintk("nfs_rpc_verify: giant auth size\n");
printk890fs/nfs/proc.cprintk("nfs_rpc_verify: RPC call failed: %d\n", n);
printk945fs/nfs/proc.cprintk("nfs_stat_to_errno: bad nfs status return value: %d\n", stat);
printk42fs/nfs/rpcsock.c#define dprintk(x)    printk(x)
printk200fs/nfs/rpcsock.cprintk("RPC: aborting call due to shutdown.\n");
printk232fs/nfs/rpcsock.cprintk("RPC: loop in request Q!!\n");
printk401fs/nfs/rpcsock.cprintk("RPC: hanging in rpc_closesock.\n");
printk83fs/nfs/sock.cprintk("NFS server %s not responding, "
printk89fs/nfs/sock.cprintk("NFS server %s not responding, "
printk96fs/nfs/sock.cprintk("NFS: notice message: result = %d.\n", result);
printk101fs/nfs/sock.cprintk("NFS server %s OK.\n", server->hostname);
printk104fs/nfs/sock.cprintk("NFS: too small read memory size (%d bytes)\n", result);
printk575fs/open.cprintk("VFS: Close: file count is 0\n");
printk325fs/proc/array.cprintk("bad page directory entry %08lx\n", pgd_val(*page_dir));
printk333fs/proc/array.cprintk("bad page middle entry %08lx\n", pmd_val(*page_middle));
printk560fs/proc/array.cprintk("statm_pte_range: bad pmd (%08lx)\n", pmd_val(*pmd));
printk598fs/proc/array.cprintk("statm_pmd_range: bad pgd (%08lx)\n", pgd_val(*pgd));
printk111fs/proc/inode.cprintk("get root inode failed\n");
printk88fs/proc/mem.cprintk("Bad page dir entry %08lx\n", pgd_val(*page_dir));
printk96fs/proc/mem.cprintk("Bad page middle entry %08lx\n", pmd_val(*page_middle));
printk150fs/proc/mem.cprintk("Bad page dir entry %08lx\n", pgd_val(*page_dir));
printk158fs/proc/mem.cprintk("Bad page middle entry %08lx\n", pmd_val(*page_middle));
printk243fs/proc/mem.cprintk("Bad source page dir entry %08lx\n", pgd_val(*src_dir));
printk250fs/proc/mem.cprintk("Bad source page middle entry %08lx\n", pmd_val(*src_middle));
printk171fs/smbfs/dir.cprintk("smb_readdir: inode is NULL or not a directory\n");
printk180fs/smbfs/dir.cprintk("smb_readdir: no MEMORY for cache\n");
printk351fs/smbfs/dir.cprintk("get_pname: parent->finfo.len = %d instead of %d\n",
printk390fs/smbfs/dir.cprintk("smb_make_name: Bad parent SMB-name: %s",
printk444fs/smbfs/dir.cprintk("get_pname: Out of memory while allocating name.");
printk473fs/smbfs/dir.cprintk("smb_iget: dir is NULL\n");
printk478fs/smbfs/dir.cprintk("smb_iget: path is NULL\n");
printk488fs/smbfs/dir.cprintk("smb_iget: getattr error = %d\n", -error);
printk500fs/smbfs/dir.cprintk("smb_iget: could not alloc mem for %s\n", path);
printk527fs/smbfs/dir.cprintk("smb_iget: iget failed!");
printk538fs/smbfs/dir.cprintk("smb_free_inode: i == NULL\n");
printk603fs/smbfs/dir.cprintk("smb_free_all_inodes: INODES LEFT!!!\n");
printk607fs/smbfs/dir.cprintk("smb_free_all_inodes: freeing inode\n");
printk670fs/smbfs/dir.cprintk("smb_lookup: inode is NULL or not a directory.\n");
printk772fs/smbfs/dir.cprintk("smb_create: inode is NULL or not a directory\n");
printk814fs/smbfs/dir.cprintk("smb_mkdir: inode is NULL or not a directory\n");
printk840fs/smbfs/dir.cprintk("smb_rmdir: inode is NULL or not a directory\n");
printk865fs/smbfs/dir.cprintk("smb_unlink: inode is NULL or not a directory\n");
printk891fs/smbfs/dir.cprintk("smb_rename: old inode is NULL or not a directory\n");
printk897fs/smbfs/dir.cprintk("smb_rename: new inode is NULL or not a directory\n");
printk33fs/smbfs/file.cprintk("smb_make_open: got NULL inode\n");
printk70fs/smbfs/inode.cprintk("smb_read_inode: "
printk80fs/smbfs/inode.cprintk("smb_read_inode: inode info not found\n");
printk133fs/smbfs/inode.cprintk("smb_put_inode: could not close\n");
printk184fs/smbfs/inode.cprintk("smb_read_super: missing data argument\n");
printk190fs/smbfs/inode.cprintk("smb warning: mount version %s than kernel\n",
printk195fs/smbfs/inode.cprintk("smb_read_super: invalid file descriptor\n");
printk200fs/smbfs/inode.cprintk("smb_read_super: not a socket!\n");
printk210fs/smbfs/inode.cprintk("smb_read_super: could not alloc smb_sb_info\n");
printk257fs/smbfs/inode.cprintk("smb_read_super: Failed connection, bailing out "
printk269fs/smbfs/inode.cprintk("smb_read_super: could not get super block "
printk277fs/smbfs/inode.cprintk("smb_read_super: could not get root dir attributes\n");
printk292fs/smbfs/inode.cprintk("smb_read_super: get root inode failed\n");
printk316fs/smbfs/inode.cprintk("smb_statfs: dskattr error = %d\n", -error);
printk433fs/smbfs/inode.cprintk("smb_malloced: %d\n", smb_malloced);
printk434fs/smbfs/inode.cprintk("smb_current_malloced: %d\n", smb_current_malloced);
printk110fs/smbfs/proc.cprintk("smb_decode_data: Warning! Data block not starting "
printk276fs/smbfs/proc.cprintk("smb_errno: ");
printk278fs/smbfs/proc.cprintk("\n");
printk352fs/smbfs/proc.cprintk("smb_len = %d  valid = %d    \n", 
printk354fs/smbfs/proc.cprintk("smb_cmd = %d  smb_wct = %d  smb_bcc = %d\n", 
printk356fs/smbfs/proc.cprintk("smb_rcls = %d smb_err = %d\n", errcls, error);
printk360fs/smbfs/proc.cprintk("\n");
printk367fs/smbfs/proc.cprintk("%03d:", i);
printk370fs/smbfs/proc.cprintk("%02x ", packet[j]);
printk372fs/smbfs/proc.cprintk("   ");
printk373fs/smbfs/proc.cprintk(": ");
printk376fs/smbfs/proc.cprintk("%c", print_char(packet[j]));
printk377fs/smbfs/proc.cprintk("\n");
printk394fs/smbfs/proc.cprintk("smb_unlock_server: was not locked!\n");
printk635fs/smbfs/proc.cprintk("smb_proc_read: Warning, returned_count != data_len\n");
printk636fs/smbfs/proc.cprintk("smb_proc_read: ret_c=%d, data_len=%d\n",
printk1196fs/smbfs/proc.cprintk("smb_proc_readdir_long: "
printk1631fs/smbfs/proc.cprintk("smb_proc_connect: No memory! Bailing out.\n");
printk1652fs/smbfs/proc.cprintk("smb_proc_connect: could not catch_keepalives\n");
printk1656fs/smbfs/proc.cprintk("smb_proc_connect: Failed to send SESSION REQUEST.\n");
printk1662fs/smbfs/proc.cprintk("smb_proc_connect: Did not recieve positive response "
printk1692fs/smbfs/proc.cprintk("smb_proc_connect: Failure requesting SMBnegprot\n");
printk1839fs/smbfs/proc.cprintk("smb_proc_connect: No memory left in end of "
printk2004fs/smbfs/proc.cprintk("%s - %d", err_classes[i].class, num);
printk2012fs/smbfs/proc.cprintk("%s - %s (%s)",
printk2019fs/smbfs/proc.cprintk("Unknown error - (%d,%d)", class, num);
printk119fs/smbfs/sock.cprintk("smb_catch_keepalive: did not get valid server!\n");
printk127fs/smbfs/sock.cprintk("smb_catch_keepalive: did not get SOCK_STREAM\n");
printk135fs/smbfs/sock.cprintk("smb_catch_keepalive: sk == NULL");
printk145fs/smbfs/sock.cprintk("smb_catch_keepalive: already done\n");
printk167fs/smbfs/sock.cprintk("smb_dont_catch_keepalive: "
printk175fs/smbfs/sock.cprintk("smb_dont_catch_keepalive: did not get SOCK_STREAM\n");
printk182fs/smbfs/sock.cprintk("smb_dont_catch_keepalive: sk == NULL");
printk187fs/smbfs/sock.cprintk("smb_dont_catch_keepalive: "
printk193fs/smbfs/sock.cprintk("smb_dont_catch_keepalive: "
printk252fs/smbfs/sock.cprintk("smb_receive_raw: Invalid packet\n");
printk259fs/smbfs/sock.cprintk("smb_receive_raw: Received length (%d) > max_xmit (%d)!\n", 
printk279fs/smbfs/sock.cprintk("smb_receive_raw: recvfrom error = %d\n",
printk304fs/smbfs/sock.cprintk("smb_receive: receive error: %d\n", result);
printk351fs/smbfs/sock.cprintk("smb_receive_trans2: data/param too long\n");
printk357fs/smbfs/sock.cprintk("smb_receive_trans2: could not alloc data area\n");
printk362fs/smbfs/sock.cprintk("smb_receive_trans2: could not alloc param area\n");
printk374fs/smbfs/sock.cprintk("smb_receive_trans2: invalid parameters\n");
printk385fs/smbfs/sock.cprintk("smb_receive_trans2: invalid data block\n");
printk401fs/smbfs/sock.cprintk("smb_receive_trans2: data/params grew!\n");
printk502fs/smbfs/sock.cprintk("smb_request: Bad server!\n");
printk526fs/smbfs/sock.cprintk("smb_request: send error = %d\n", result);
printk570fs/smbfs/sock.cprintk("smb_trans2_request: Bad server!\n");
printk594fs/smbfs/sock.cprintk("smb_trans2_request: send error = %d\n", result);
printk636fs/smbfs/sock.cprintk("smb_request_read_raw: Bad server!\n");
printk670fs/smbfs/sock.cprintk("smb_request_read_raw: send error = %d\n", result);
printk711fs/smbfs/sock.cprintk("smb_request_write_raw: Bad server!\n");
printk21fs/stat.cprintk("VFS: Warning: %s using old stat() call. Recompile your binary.\n",
printk346fs/super.cprintk("VFS: Root device %s: prepare for armageddon\n",
printk353fs/super.cprintk("VFS: Mounted device %s - tssk, tssk\n",
printk406fs/super.cprintk("VFS: on device %s: get_fs_type(%s) failed\n",
printk455fs/super.cprintk("VFS: put_unnamed_dev: freeing unused device %s\n",
printk489fs/super.cprintk("VFS: umount(%s): mounted inode has i_mount=NULL\n",
printk822fs/super.cprintk (KERN_NOTICE "VFS: Mounted root (nfs filesystem).\n");
printk828fs/super.cprintk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n");
printk836fs/super.cprintk(KERN_NOTICE "VFS: Insert root floppy and press ENTER\n");
printk869fs/super.cprintk ("VFS: Mounted root (%s filesystem)%s.\n",
printk38fs/sysv/balloc.cprintk("sysv_free_block: trying to free block on nonexistent device\n");
printk42fs/sysv/balloc.cprintk("sysv_free_block: trying to free block not in datazone\n");
printk47fs/sysv/balloc.cprintk("sysv_free_block: flc_count > flc_size\n");
printk60fs/sysv/balloc.cprintk("sysv_free_block: getblk() failed\n");
printk97fs/sysv/balloc.cprintk("sysv_free_block: getblk() failed\n");
printk135fs/sysv/balloc.cprintk("sysv_new_block: trying to get new block from nonexistent device\n");
printk152fs/sysv/balloc.cprintk("sysv_new_block: new block %d is not in data zone\n",block);
printk161fs/sysv/balloc.cprintk("sysv_new_block: cannot read free-list block\n");
printk188fs/sysv/balloc.cprintk("sysv_new_block: free-list block with >flc_size entries\n");
printk200fs/sysv/balloc.cprintk("sysv_new_block: getblk() failed\n");
printk205fs/sysv/balloc.cprintk("sysv_new_block: block already in use\n");
printk254fs/sysv/balloc.cprintk("sysv_count_free_blocks: new block %d is not in data zone\n",block);
printk258fs/sysv/balloc.cprintk("sysv_count_free_blocks: cannot read free-list block\n");
printk282fs/sysv/balloc.cprintk("sysv_count_free_blocks: free-list block with >flc_size entries\n");
printk311fs/sysv/balloc.cprintk("sysv_count_free_blocks: free block count was %d, correcting to %d\n",old_count,count);
printk97fs/sysv/dir.cprintk("sysv_readdir: Bad inode number on dev "
printk87fs/sysv/file.cprintk("sysv_file_read: inode = NULL\n");
printk91fs/sysv/file.cprintk("sysv_file_read: mode = %07o\n",inode->i_mode);
printk210fs/sysv/file.cprintk("sysv_file_write: inode = NULL\n");
printk214fs/sysv/file.cprintk("sysv_file_write: mode = %07o\n",inode->i_mode);
printk62fs/sysv/ialloc.cprintk("sysv_free_inode: inode has no device\n");
printk66fs/sysv/ialloc.cprintk("sysv_free_inode: inode has count=%d\n", inode->i_count);
printk70fs/sysv/ialloc.cprintk("sysv_free_inode: inode has nlink=%d\n", inode->i_nlink);
printk74fs/sysv/ialloc.cprintk("sysv_free_inode: inode on nonexistent device\n");
printk79fs/sysv/ialloc.cprintk("sysv_free_inode: inode 0,1,2 or nonexistent inode\n");
printk83fs/sysv/ialloc.cprintk("sysv_free_inode: unable to read inode block on device "
printk129fs/sysv/ialloc.cprintk("sysv_new_inode: unable to read inode table\n");
printk195fs/sysv/ialloc.cprintk("sysv_count_free_inodes: unable to read inode table\n");
printk206fs/sysv/ialloc.cprintk("sysv_count_free_inodes: free inode count was %d, correcting to %d\n",(short)(*sb->sv_sb_total_free_inodes),count);
printk397fs/sysv/inode.cprintk("VFS: unable to read Xenix/SystemV/Coherent superblock on device "
printk423fs/sysv/inode.cprintk("SysV FS: cannot read superblock in 1024 byte mode\n");
printk469fs/sysv/inode.cprintk("SysV FS: cannot read superblock in 512 byte mode\n");
printk475fs/sysv/inode.cprintk("VFS: Found a %s FS (block size = %d) on device %s\n",
printk487fs/sysv/inode.cprintk("SysV FS: get root inode failed\n");
printk624fs/sysv/inode.cprintk("sysv_bmap: block<0");
printk627fs/sysv/inode.cprintk("sysv_bmap: block>big");
printk751fs/sysv/inode.cprintk("sysv_getblk: block<0");
printk754fs/sysv/inode.cprintk("sysv_getblk: block>big");
printk810fs/sysv/inode.cprintk("Bad inode number on dev %s"
printk817fs/sysv/inode.cprintk("Major problem: unable to read inode from dev "
printk897fs/sysv/inode.cprintk("Bad inode number on dev %s"
printk905fs/sysv/inode.cprintk("unable to read i-node block\n");
printk960fs/sysv/inode.cprintk ("IO error syncing sysv inode ["
printk417fs/sysv/namei.cprintk("Bad directory on device %s\n",
printk462fs/sysv/namei.cprintk("empty directory has nlink!=2 (%d)\n",inode->i_nlink);
printk512fs/sysv/namei.cprintk("Deleting nonexistent file (%s:%lu), %d\n",
printk280fs/sysv/truncate.cprintk("sysv_truncate: truncating symbolic link\n");
printk39fs/umsdos/check.cif (stack_level < 1500) printk ("** %d ** ",stack_level);
printk47fs/umsdos/check.cprintk ("|%d:%08lx| ",i, page_dir->pgd);
printk50fs/umsdos/check.cif (err) printk ("\nErreur MM %d\n",err);
printk23fs/umsdos/dir.c#define Printk(x) printk x
printk399fs/umsdos/dir.cprintk ("UMSDOS: lookup_patch entry->nlink < 1 ???\n");
printk405fs/umsdos/dir.cif (inode->u.umsdos_i.i_emd_owner==0) printk ("emd_owner still 0 ???\n");
printk503fs/umsdos/dir.cprintk ("UMSDOS: can't locate inode %ld in EMD file???\n"
printk693fs/umsdos/dir.cprintk ("UMSDOS: Erase entry %s, out of sync with MsDOS\n"
printk21fs/umsdos/emd.c#define Printk(x) printk x
printk90fs/umsdos/emd.cprintk ("UMSDOS: problem with EMD file. Can't read pos = %Ld (%d != %d)\n"
printk125fs/umsdos/emd.cprintk ("UMSDOS: Can't create EMD file\n");
printk196fs/umsdos/emd.cprintk ("UMSDOS: problem with EMD file. Can't write\n");
printk23fs/umsdos/file.c#define Printk(x)  printk x
printk36fs/umsdos/inode.c#define Printk(x) printk x
printk45fs/umsdos/inode.cprintk ("Umsdos: Oops releasing pseudo_root. Notify jacques@solucorp.qc.ca\n");
printk191fs/umsdos/inode.cprintk ("UMSDOS: *** EMD_OWNER ??? *** ino = %ld %ld <> %ld "
printk209fs/umsdos/inode.cprintk ("UMSDOS: umsdos_get_dirowner ino == 0\n");
printk311fs/umsdos/inode.cprintk ("UMSDOS: emd_owner = NULL ???");
printk404fs/umsdos/inode.cprintk ("UMSDOS Beta 0.6 (compatibility level %d.%d, fast msdos)\n"
printk19fs/umsdos/ioctl.c#define Printk(x) printk x
printk90fs/umsdos/mangle.cprintk ("UMSDOS: More than 9216 file in a directory.\n"
printk22fs/umsdos/namei.c#define Printk(x)  printk x
printk134fs/umsdos/namei.cprintk ("UMSDOS: dir->u.umsdos_i.u.dir_info.creating < 0: %d"
printk146fs/umsdos/namei.cprintk ("UMSDOS: dir->u.umsdos_i.u.dir_info.looking < 0: %d"
printk261fs/umsdos/namei.cprintk ("UMSDOS: out of sync, Creation error [%ld], "
printk299fs/umsdos/namei.cprintk(KERN_ALERT "UMSDOS: %s magic %x != %lx ligne %d\n" \
printk383fs/umsdos/namei.cprintk ("UMSDOS: partial rename for file %s\n"
printk454fs/umsdos/namei.cprintk ("UMSDOS: "
printk728fs/umsdos/namei.cprintk ("UMSDOS: Can't create empty --linux-.---\n");
printk22fs/umsdos/rdir.c#define Printk(x) printk x
printk23fs/umsdos/symlink.c#define Printk(x)  printk x
printk116fs/xiafs/bitmap.cprintk("XIA-FS: bad inode/zone number (%s %d)\n", WHERE_ERR);
printk136fs/xiafs/bitmap.cprintk("XIA-FS: read bitmap failed (%s %d)\n", WHERE_ERR);
printk220fs/xiafs/bitmap.cprintk(INTERN_ERR);
printk225fs/xiafs/bitmap.cprintk("XIA-FS: bad zone number (%s %d)\n", WHERE_ERR);
printk238fs/xiafs/bitmap.cprintk("XIA-FS: dev %s"
printk251fs/xiafs/bitmap.cprintk(INTERN_ERR);
printk264fs/xiafs/bitmap.cprintk("XIA-FS: I/O error (%s %d)\n", WHERE_ERR);
printk268fs/xiafs/bitmap.cprintk(INTERN_ERR);
printk289fs/xiafs/bitmap.cprintk("XIA-FS: bad inode (%s %d)\n", WHERE_ERR);
printk299fs/xiafs/bitmap.cprintk("XIA-FS: dev %s"
printk102fs/xiafs/dir.cprintk("XIA-FS: bad directory entry (%s %d)\n", WHERE_ERR);
printk122fs/xiafs/dir.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk82fs/xiafs/file.cprintk("XIA-FS: inode = NULL (%s %d)\n", WHERE_ERR);
printk86fs/xiafs/file.cprintk("XIA-FS: mode != regular (%s %d)\n", WHERE_ERR);
printk200fs/xiafs/file.cprintk("XIA-FS: inode = NULL (%s %d)\n", WHERE_ERR);
printk204fs/xiafs/file.cprintk("XIA-FS: mode != regular (%s %d)\n", WHERE_ERR);
printk79fs/xiafs/inode.cprintk("XIA-FS: read super_block failed (%s %d)\n", WHERE_ERR);
printk90fs/xiafs/inode.cprintk("VFS: Can't find a xiafs filesystem on dev "
printk164fs/xiafs/inode.cprintk("XIA-FS: read bitmaps failed (%s %d)\n", WHERE_ERR);
printk200fs/xiafs/inode.cprintk("XIA-FS: block < 0 (%s %d)\n", WHERE_ERR);
printk204fs/xiafs/inode.cprintk("XIA-FS: zone > big (%s %d)\n", WHERE_ERR);
printk330fs/xiafs/inode.cprintk("XIA-FS: zone < 0 (%s %d)\n", WHERE_ERR);
printk335fs/xiafs/inode.cprintk("XIA-FS: zone > big (%s %d)\n", WHERE_ERR);
printk383fs/xiafs/inode.cprintk("XIA-FS: bad inode number (%s %d)\n", WHERE_ERR);
printk390fs/xiafs/inode.cprintk("XIA-FS: read i-node zone failed (%s %d)\n", WHERE_ERR);
printk437fs/xiafs/inode.cprintk("XIA-FS: write_inode on a read-only filesystem (%s %d)\n", WHERE_ERR);
printk444fs/xiafs/inode.cprintk("XIA-FS: bad inode number (%s %d)\n", WHERE_ERR);
printk452fs/xiafs/inode.cprintk("XIA-FS: read i-node zone failed (%s %d)\n", WHERE_ERR);
printk503fs/xiafs/inode.cprintk ("IO error syncing xiafs inode [%s:%lu]\n",
printk72fs/xiafs/namei.cprintk("XIA-FS: bad dir size (%s %d)\n", WHERE_ERR);
printk83fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk109fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk167fs/xiafs/namei.cprintk("XIA-FS: bad dir size (%s %d)\n", WHERE_ERR);
printk179fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk201fs/xiafs/namei.cprintk("XIA-FS: bad directory entry (%s %d)\n", WHERE_ERR);
printk237fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk413fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk422fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk428fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk434fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk451fs/xiafs/namei.cprintk("XIA-FS: bad directory (%s %d)\n", WHERE_ERR);
printk474fs/xiafs/namei.cprintk("XIA-FS: bad directory entry (%s %d)\n", WHERE_ERR);
printk480fs/xiafs/namei.cprintk("XIA-FS: bad directory entry (%s %d)\n", WHERE_ERR);
printk522fs/xiafs/namei.cprintk("XIA-FS: empty directory has nlink!=2 (%s %d)\n", WHERE_ERR);
printk568fs/xiafs/namei.cprintk("XIA-FS: Deleting nonexistent file (%s %d)\n", WHERE_ERR);
printk355include/asm-alpha/pgtable.hprintk("Bad pmd in pte_alloc: %08lx\n", pmd_val(*pmd));
printk385include/asm-alpha/pgtable.hprintk("Bad pgd in pmd_alloc: %08lx\n", pgd_val(*pgd));
printk413include/asm-alpha/pgtable.hprintk("Bad pmd in pte_alloc: %08lx\n", pmd_val(*pmd));
printk441include/asm-alpha/pgtable.hprintk("Bad pgd in pmd_alloc: %08lx\n", pgd_val(*pgd));
printk38include/asm-i386/bugs.hprintk("387 failed: trying to reset\n");
printk52include/asm-i386/bugs.hprintk("No coprocessor found and no math emulation present.\n");
printk53include/asm-i386/bugs.hprintk("Giving up.\n");
printk67include/asm-i386/bugs.hprintk("Checking 386/387 coupling... ");
printk80include/asm-i386/bugs.hprintk("Ok, fpu using old IRQ13 error reporting\n");
printk95include/asm-i386/bugs.hprintk("Ok, fpu using exception 16 error reporting.\n");
printk99include/asm-i386/bugs.hprintk("Hmm, FDIV bug i%c86 system\n", '0'+x86);
printk104include/asm-i386/bugs.hprintk("Checking 'hlt' instruction... ");
printk106include/asm-i386/bugs.hprintk("disabled\n");
printk110include/asm-i386/bugs.hprintk("Ok.\n");
printk121include/asm-i386/bugs.hprintk("CPU is a 386 and this kernel was compiled for 486 or better.\n");
printk122include/asm-i386/bugs.hprintk("Giving up.\n");
printk355include/asm-i386/pgtable.hprintk("Bad pmd in pte_alloc: %08lx\n", pmd_val(*pmd));
printk397include/asm-i386/pgtable.hprintk("Bad pmd in pte_alloc: %08lx\n", pmd_val(*pmd));
printk131include/asm-mips/asm.hjal  printk;                 \
printk20include/asm-mips/bugs.hprintk("Checking for 'wait' instruction... ");
printk25include/asm-mips/bugs.hprintk(" available.\n");
printk28include/asm-mips/bugs.hprintk(" unavailable.\n");
printk399include/asm-mips/pgtable.hprintk("Bad pmd in pte_alloc_kernel: %08lx\n", pmd_val(*pmd));
printk449include/asm-mips/pgtable.hprintk("Bad pmd in pte_alloc: %08lx\n", pmd_val(*pmd));
printk404include/asm-ppc/pgtable.hprintk("Bad pmd in pte_alloc: %08lx\n", pmd_val(*pmd));
printk446include/asm-ppc/pgtable.hprintk("Bad pmd in pte_alloc: %08lx\n", pmd_val(*pmd));
printk487include/asm-ppc/pgtable.hprintk("Update MMU cache - VMA: %x, Addr: %x, PTE: %x\n", vma, address, *(long *)&_pte);
printk102include/asm-sparc/floppy.hprintk("floppy: Asked to read unknown port %d\n", port);
printk121include/asm-sparc/floppy.hprintk("floppy: Asked to write to unknown port %d\n", port);
printk158include/asm-sparc/floppy.hprintk("floppy: Asked to read unknown port %d\n", port);
printk177include/asm-sparc/floppy.hprintk("floppy: Asked to write to unknown port %d\n", port);
printk231include/asm-sparc/floppy.hprintk("Unknown dma mode %d\n", mode);
printk109include/asm-sparc/io.hprintk("mapioaddr: Trying to map IO space for unsupported machine.\n");
printk110include/asm-sparc/io.hprintk("mapioaddr: sparc_cpu_model = %d\n", sparc_cpu_model);
printk111include/asm-sparc/io.hprintk("mapioaddr: Halting...\n");
printk358include/linux/blk.hprintk("end_request: I/O error, dev %s, sector %lu\n",
printk375include/linux/blk.hprintk("end_request: buffer-list destroyed\n");
printk46include/linux/ext2_fs.hprintk ("EXT2-fs DEBUG (%s, %d): %s:", \
printk48include/linux/ext2_fs.hprintk (f, ## a); \
printk54include/linux/kernel.hasmlinkage int printk(const char * fmt, ...)
printk358include/linux/sched.hprintk("add_wait_queue (%08lx): wait->next = %08lx\n",pc,(unsigned long) wait->next);
printk406include/linux/sched.hprintk("removed wait_queue not on list.\n");
printk407include/linux/sched.hprintk("list = %08lx, queue = %08lx\n",(unsigned long) p, (unsigned long) wait);
printk409include/linux/sched.hprintk("eip = %08lx\n",ok);
printk87include/linux/smb_fs.h#define DPRINTK(format, args...) printk(format , ## args)
printk93include/linux/smb_fs.h#define DDPRINTK(format, args...) printk(format , ## args)
printk344init/main.cprintk("Calibrating delay loop.. ");
printk375init/main.cprintk("ok - %lu.%02lu BogoMIPS\n",
printk638init/main.cprintk(linux_banner);
printk225ipc/sem.cprintk("do_semop: race\n");
printk230ipc/sem.cprintk("do_semop: race\n");
printk236ipc/sem.cprintk("do_semop: race\n");
printk692ipc/sem.cprintk ("sem_exit undo list error id=%d\n", u->semid);
printk169ipc/shm.cprintk ("shm nono: killseg called on unused seg id=%d\n", id);
printk179ipc/shm.cprintk ("shm nono: killseg shp->pages=NULL. id=%d\n", id);
printk394ipc/shm.cprintk("shm_close: shm segment (id=%ld) attach list inconsistent\n",
printk396ipc/shm.cprintk("shm_close: %08lx-%08lx %c%c%c%c %08lx %08lx\n",
printk554ipc/shm.cprintk("shm_open: unused id=%d PANIC\n", id);
printk612ipc/shm.cprintk ("shm_swap_in: code id = %d and shmd id = %ld differ\n",
printk617ipc/shm.cprintk ("shm_swap_in: id=%d too big. proc mem corrupted\n", id);
printk622ipc/shm.cprintk ("shm_swap_in: id=%d invalid. Race.\n", id);
printk627ipc/shm.cprintk ("shm_swap_in: code idx = %u and shmd idx = %lu differ\n",
printk632ipc/shm.cprintk ("shm_swap_in : too large page index. id=%d\n", id);
printk731ipc/shm.cprintk ("shm_swap: id=%ld does not match shmd->vm_pte.id=%ld\n",
printk740ipc/shm.cprintk("shm_swap: bad pgtbl! id=%ld start=%lx idx=%ld\n",
printk747ipc/shm.cprintk("shm_swap: bad pgmid! id=%ld start=%lx idx=%ld\n",
printk761ipc/shm.cprintk("shm_swap_out: page and pte mismatch\n");
printk90kernel/dma.cprintk("Trying to free DMA%d\n", dmanr);
printk95kernel/dma.cprintk("Trying to free free DMA%d\n", dmanr);
printk66kernel/exec_domain.cprintk(KERN_ERR "No execution domain for personality 0x%02lx\n", pers);
printk88kernel/exit.cprintk("task releasing itself\n");
printk98kernel/exit.cprintk(KERN_ALERT "release: %s kernel stack corruption. Aiee\n", p->comm);
printk143kernel/exit.cprintk("Warning, pid %d's parent link is bad\n",
printk146kernel/exit.cprintk("Warning, pid %d's child link is bad\n",
printk149kernel/exit.cprintk("Warning, pid %d's ys link is bad\n",
printk152kernel/exit.cprintk("Warning, pid %d's os link is bad\n",
printk155kernel/exit.cprintk("Warning, pid %d parent link points to self\n",
printk158kernel/exit.cprintk("Warning, pid %d child link points to self\n",
printk161kernel/exit.cprintk("Warning, pid %d ys link points to self\n",
printk164kernel/exit.cprintk("Warning, pid %d os link points to self\n",
printk168kernel/exit.cprintk(
printk173kernel/exit.cprintk(
printk179kernel/exit.cprintk(
printk184kernel/exit.cprintk(
printk190kernel/exit.cprintk(
printk194kernel/exit.cprintk(
printk507kernel/exit.cprintk("Aiee, killing interrupt handler\n");
printk364kernel/ksyms.cX(printk),
printk50kernel/module.c#define PRINTK(a) printk a
printk100kernel/module.cprintk("rename %s to %s failed!\n", old_name, new_name);
printk212kernel/module.cprintk("warning: you are using an old insmod, no symbols will be inserted!\n");
printk268kernel/module.cprintk("Rejecting illegal symbol table (n_symbols=%d,n_refs=%d)\n",
printk277kernel/module.cprintk("Rejecting illegal symbol table\n");
printk303kernel/module.cprintk("Non-module reference! Rejected!\n");
printk688kernel/module.cprintk("Out of memory for new symbol table!\n");
printk724kernel/module.cprintk("Warning, dropping old symbols\n");
printk751kernel/module.cprintk("Out of memory for new symbol table!\n");
printk26kernel/panic.cprintk(KERN_EMERG "Kernel panic: %s\n",buf);
printk28kernel/panic.cprintk(KERN_EMERG "In swapper task - not syncing\n");
printk81kernel/resource.cprintk("warning: ioport table is full\n");
printk102kernel/sched.cprintk("task already on run-queue\n");
printk121kernel/sched.cprintk("task not on run-queue\n");
printk129kernel/sched.cprintk("idle task may not sleep\n");
printk257kernel/sched.cprintk("Aiee: scheduling in interrupt\n");
printk376kernel/sched.cprintk("wait_queue is bad (eip = %p)\n",
printk378kernel/sched.cprintk("        q = %p\n",q);
printk379kernel/sched.cprintk("       *q = %p\n",*q);
printk380kernel/sched.cprintk("      tmp = %p\n",tmp);
printk400kernel/sched.cprintk("wait_queue is bad (eip = %p)\n",
printk402kernel/sched.cprintk("        q = %p\n",q);
printk403kernel/sched.cprintk("       *q = %p\n",*q);
printk404kernel/sched.cprintk("      tmp = %p\n",tmp);
printk466kernel/sched.cprintk("add_timer() called with non-zero list from %p\n",
printk503kernel/sched.cprintk("del_timer() called from %p with timer not initialized\n",
printk606kernel/sched.cprintk("Clock: inserting leap second 23:59:60 UTC\n");
printk614kernel/sched.cprintk("Clock: deleting leap second 23:59:59 UTC\n");
printk944kernel/sched.cprintk("%-8s %3d ", p->comm, (p == current) ? -nr : nr);
printk946kernel/sched.cprintk(stat_nam[p->state]);
printk948kernel/sched.cprintk(" ");
printk951kernel/sched.cprintk(" current  ");
printk953kernel/sched.cprintk(" %08lX ", thread_saved_pc(&p->tss));
printk956kernel/sched.cprintk("   current task   ");
printk958kernel/sched.cprintk(" %016lx ", thread_saved_pc(&p->tss));
printk964kernel/sched.cprintk("%5lu %5d %6d ", free*sizeof(long), p->pid, p->p_pptr->pid);
printk966kernel/sched.cprintk("%5d ", p->p_cptr->pid);
printk968kernel/sched.cprintk("      ");
printk970kernel/sched.cprintk("%7d", p->p_ysptr->pid);
printk972kernel/sched.cprintk("       ");
printk974kernel/sched.cprintk(" %5d\n", p->p_osptr->pid);
printk976kernel/sched.cprintk("\n");
printk984kernel/sched.cprintk("\n"
printk986kernel/sched.cprintk("  task             PC    stack   pid father child younger older\n");
printk988kernel/sched.cprintk("\n"
printk990kernel/sched.cprintk("  task                 PC        stack   pid father child younger older\n");
printk54kernel/softirq.cprintk ("irq.c:bad bottom half entry %08lx\n", mask);
printk176kernel/sys.cprintk(KERN_EMERG "System halted\n");
printk345mm/filemap.cprintk("filemap_sync_pte_range: bad pmd (%08lx)\n", pmd_val(*pmd));
printk375mm/filemap.cprintk("filemap_sync_pmd_range: bad pgd (%08lx)\n", pgd_val(*pgd));
printk149mm/kmalloc.cprintk("Cannot use %d bytes out of %d in order = %d block mallocs\n",
printk184mm/kmalloc.cprintk("kmalloc of too large a block (%d bytes).\n", (int) size);
printk203mm/kmalloc.cprintk("kmalloc called nonatomically from interrupt %p\n",
printk216mm/kmalloc.cprintk("Problem: block on freelist at %08lx isn't free.\n", (long) p);
printk236mm/kmalloc.cprintk("Couldn't get a free page.....\n");
printk299mm/kmalloc.cprintk("kfree of non-kmalloced memory: %p, next= %p, order=%d\n",
printk321mm/kmalloc.cprintk("Ooops. page %p doesn't show on freelist.\n", page);
printk86mm/memory.cprintk("\nOut of memory for %s.\n", current->comm);
printk103mm/memory.cprintk("free_one_pmd: bad directory entry %08lx\n", pmd_val(*dir));
printk119mm/memory.cprintk("free_one_pgd: bad directory entry %08lx\n", pgd_val(*dir));
printk144mm/memory.cprintk("%s trying to clear kernel page-directory: not good\n", tsk->comm);
printk165mm/memory.cprintk("%s trying to free kernel page-directory: not good\n", tsk->comm);
printk224mm/memory.cprintk("copy_pte_range: bad pmd (%08lx)\n", pmd_val(*src_pmd));
printk257mm/memory.cprintk("copy_pmd_range: bad pgd (%08lx)\n", pgd_val(*src_pgd));
printk332mm/memory.cprintk("zap_pte_range: bad pmd (%08lx)\n", pmd_val(*pmd));
printk358mm/memory.cprintk("zap_pmd_range: bad pgd (%08lx)\n", pgd_val(*dir));
printk528mm/memory.cprintk("put_page: page already exists %08lx\n", pte_val(*page_table));
printk547mm/memory.cprintk("put_dirty_page: trying to put page %08lx at %08lx\n",page,address);
printk549mm/memory.cprintk("mem_map disagrees with %08lx at %08lx\n",page,address);
printk564mm/memory.cprintk("put_dirty_page: page already exists\n");
printk644mm/memory.cprintk("do_wp_page: bogus page at address %08lx (%08lx)\n",address,old_page);
printk648mm/memory.cprintk("do_wp_page: bogus page-middle at address %08lx (%08lx)\n", address, pmd_val(*page_middle));
printk652mm/memory.cprintk("do_wp_page: bogus page-dir entry at address %08lx (%08lx)\n", address, pgd_val(*page_dir));
printk776mm/memory.cprintk("try_to_share: bad page directory %08lx\n", pgd_val(*from_dir));
printk785mm/memory.cprintk("try_to_share: bad mid directory %08lx\n", pmd_val(*from_middle));
printk810mm/memory.cprintk("try_to_share: bad page directory %08lx\n", pgd_val(*to_dir));
printk818mm/memory.cprintk("try_to_share: bad mid directory %08lx\n", pmd_val(*to_middle));
printk896mm/memory.cprintk("Aiee! Corrupt vm_area_struct i_mmap ring\n");
printk931mm/memory.cprintk("bad page table directory entry %p:[%lx]\n", page_dir, pgd_val(*page_dir));
printk939mm/memory.cprintk("bad page table directory entry %p:[%lx]\n", page_dir, pgd_val(*page_dir));
printk264mm/mmap.cprintk("avl_neighbours: node not found in the tree\n");
printk278mm/mmap.cprintk("avl_neighbours: node not exactly found in the tree\n");
printk294mm/mmap.cprintk("avl_neighbours: tree inconsistent with list\n");
printk449mm/mmap.cprintk("avl_remove: node to delete not found in tree\n");
printk492mm/mmap.cprintk("[");
printk494mm/mmap.cprintk("%08lX-%08lX", vma->vm_start, vma->vm_end);
printk498mm/mmap.cprintk(" ");
printk500mm/mmap.cprintk("]");
printk507mm/mmap.cprintk("(");
printk510mm/mmap.cprintk("<");
printk512mm/mmap.cprintk("%08lX-%08lX", tree->vm_start, tree->vm_end);
printk514mm/mmap.cprintk(">");
printk517mm/mmap.cprintk(")");
printk539mm/mmap.cprintk("%s: avl_checkheights: heights inconsistent\n",avl_check_point);
printk551mm/mmap.cprintk("%s: avl_checkleft: left key %lu >= top key %lu\n",avl_check_point,tree->vm_avl_key,key);
printk563mm/mmap.cprintk("%s: avl_checkright: right key %lu <= top key %lu\n",avl_check_point,tree->vm_avl_key,key);
printk623mm/mmap.cprintk("unmap_fixup: area=%lx-%lx, unmap %lx-%lx!!\n",
printk810mm/mmap.cprintk("insert_vm_struct: overlapping memory areas\n");
printk820mm/mmap.cprintk("insert_vm_struct: tree inconsistent with list\n");
printk854mm/mmap.cprintk("Inode i_mmap ring corrupted\n");
printk893mm/mmap.cprintk("looping in merge_segments, mpnt=0x%lX\n", (unsigned long) mpnt);
printk29mm/mprotect.cprintk("change_pte_range: bad pmd (%08lx)\n", pmd_val(*pmd));
printk56mm/mprotect.cprintk("change_pmd_range: bad pgd (%08lx)\n", pgd_val(*pgd));
printk97mm/swap.cprintk("Swap cache: add %ld/%ld, delete %ld/%ld, find %ld/%ld\n",
printk114mm/swap.cprintk("swap_cache: replacing non-NULL entry\n");
printk185mm/swap.cprintk("Internal error: bad swap-device\n");
printk191mm/swap.cprintk("rw_swap_page: weirdness\n");
printk195mm/swap.cprintk("Hmm.. Trying to use unallocated swap (%08lx)\n", entry);
printk199mm/swap.cprintk("Trying to swap to unused swap-device\n");
printk233mm/swap.cprintk("rw_swap_page: bad swap file\n");
printk244mm/swap.cprintk("rw_swap_page: bad swap file\n");
printk250mm/swap.cprintk("re_swap_page: no swap file or device\n");
printk252mm/swap.cprintk("rw_swap_page: lock already cleared\n");
printk314mm/swap.cprintk("Trying to duplicate nonexistent swap-page\n");
printk319mm/swap.cprintk("swap_duplicate: weirdness\n");
printk323mm/swap.cprintk("swap_duplicate: trying to duplicate unused page\n");
printk341mm/swap.cprintk("Trying to free nonexistent swap-page\n");
printk347mm/swap.cprintk("swap_free: weirdness\n");
printk351mm/swap.cprintk("Trying to free swap from unused swap-device\n");
printk359mm/swap.cprintk("swap_free: swap-space map bad (entry %08lx)\n",entry);
printk470mm/swap.cprintk("Aiee.. duplicated cached swap-cache entry\n");
printk510mm/swap.cprintk("swap_out_pmd: bad pmd (%08lx)\n", pmd_val(*dir));
printk542mm/swap.cprintk("swap_out_pgd: bad pgd (%08lx)\n", pgd_val(*dir));
printk789mm/swap.cprintk("Trying to free free memory (%08lx): memory probably corrupted\n",addr);
printk790mm/swap.cprintk("PC = %p\n", __builtin_return_address(0));
printk844mm/swap.cprintk("gfp called nonatomically from interrupt %p\n",
printk876mm/swap.cprintk("Free pages:      %6dkB\n ( ",nr_free_pages<<(PAGE_SHIFT-10));
printk886mm/swap.cprintk("%lu*%lukB ", nr, (PAGE_SIZE>>10) << order);
printk889mm/swap.cprintk("= %lukB)\n", total);
printk946mm/swap.cprintk("unuse_pmd: bad pmd (%08lx)\n", pmd_val(*dir));
printk975mm/swap.cprintk("unuse_pgd: bad pgd (%08lx)\n", pgd_val(*dir));
printk1201mm/swap.cprintk("Unable to start swapping: out of memory :-)\n");
printk1207mm/swap.cprintk("Unable to find swap-space signature\n");
printk1225mm/swap.cprintk("Empty swap-file\n");
printk1245mm/swap.cprintk("Adding Swap: %dk swap-space\n",j<<(PAGE_SHIFT-10));
printk49mm/vmalloc.cprintk("free_area_pte: bad pmd (%08lx)\n", pmd_val(*pmd));
printk69mm/vmalloc.cprintk("Whee.. Swapped out page in kernel page table\n");
printk81mm/vmalloc.cprintk("free_area_pmd: bad pgd (%08lx)\n", pgd_val(*dir));
printk122mm/vmalloc.cprintk("alloc_area_pte: page already exists\n");
printk184mm/vmalloc.cprintk("remap_area_pte: page already exists\n");
printk263mm/vmalloc.cprintk("Trying to vfree() bad address (%p)\n", addr);
printk274mm/vmalloc.cprintk("Trying to vfree() nonexistent vm area (%p)\n", addr);
printk89net/802/psnap.cprintk("SNAP - unable to register with 802.2\n");
printk78net/802/tr.cprintk("tr_rebuild_header: Don't know how to resolve type %04X addresses ?\n",(unsigned int)htons(  trllc->ethertype));
printk141net/802/tr.cprintk("source routing for %02X %02X %02X %02X %02X %02X\n",trh->daddr[0],
printk174net/802/tr.cprintk("hash: %d\n",hash);
printk180net/802/tr.cprintk("adding rif_entry: addr:%02X:%02X:%02X:%02X:%02X:%02X rcf:%04X\n",
printk187net/802/tr.cprintk("tr.c: Couldn't malloc rif cache entry !\n");
printk202net/802/tr.cprintk("updating rif_entry: addr:%02X:%02X:%02X:%02X:%02X:%02X rcf:%04X\n",
printk753net/appletalk/aarp.cprintk("Unable to register AARP with SNAP.\n");
printk782net/appletalk/ddp.cprintk("Too many routes/iface.\n");
printk1563net/appletalk/ddp.cprintk("SK %p: Got address.\n",sk);
printk1586net/appletalk/ddp.cprintk("SK %p: Size needed %d, device %s\n", sk, size, dev->name);
printk1603net/appletalk/ddp.cprintk("SK %p: Begin build.\n", sk);
printk1624net/appletalk/ddp.cprintk("SK %p: Copy user data (%d bytes).\n", sk, len);
printk1657net/appletalk/ddp.cprintk("SK %p: send out(copy).\n", sk);
printk1668net/appletalk/ddp.cprintk("SK %p: Loop back.\n", sk);
printk1682net/appletalk/ddp.cprintk("SK %p: send out.\n", sk);
printk1694net/appletalk/ddp.cprintk("SK %p: Done write (%d).\n", sk, len);
printk1882net/appletalk/ddp.cprintk("Unable to register DDP with SNAP.\n");
printk1905net/appletalk/ddp.cprintk("Appletalk 0.14 for Linux NET3.032\n");
printk1133net/ax25/af_ax25.cprintk("AX25: bind failed: in use\n");
printk1157net/ax25/af_ax25.cprintk("AX25 bind failed: no device\n");
printk1167net/ax25/af_ax25.cprintk("AX25: socket is bound\n");
printk1758net/ax25/af_ax25.cprintk("AX.25: sendto: Addresses built.\n");
printk1762net/ax25/af_ax25.cprintk("AX.25: sendto: building packet.\n");
printk1777net/ax25/af_ax25.cprintk("AX.25: Appending user data\n");
printk1787net/ax25/af_ax25.cprintk("AX.25: Transmitting buffer\n");
printk1803net/ax25/af_ax25.cprintk("Building AX.25 Header (dp=%p).\n", dp);
printk1805net/ax25/af_ax25.cprintk("Num digipeaters=%d\n", dp->ndigi);
printk1812net/ax25/af_ax25.cprintk("Built header (%d bytes)\n",lv);
printk1817net/ax25/af_ax25.cprintk("base=%p pos=%p\n", skb->data, asmptr);
printk2159net/ax25/af_ax25.cprintk("G4KLX/GW4PTS AX.25 for Linux. Version 0.30 BETA for Linux NET3.032 (Linux 1.3.35)\n");
printk2169net/ax25/af_ax25.cprintk("G8BPQ Encapsulation of AX.25 frames enabled\n");
printk2199net/ax25/af_ax25.cprintk("ax25_queue_xmit: not enough space to add BPQ Ether header\n");
printk676net/ax25/ax25_in.cprintk("ax25_process_rx_frame: frame received - state = %d\n", ax25->state);
printk228net/ax25/ax25_out.cprintk("ax25_transmit_buffer: not enough room for digi-peaters\n");
printk446net/ax25/ax25_route.cprintk("ax25_dev_get_flag called with invalid device\n");
printk184net/core/dev.cprintk("dev_remove_pack: %p not found.\n", pt);
printk348net/core/dev.cprintk("bad priority in dev_queue_xmit.\n");
printk521net/core/dev.cprintk("INET: dev_rint: no longer dropping packets.\n");
printk528net/core/dev.cprintk("dev_rint: packet dropped on %s (no memory) !\n",
printk152net/core/net_alias.cprintk("net_alias: tried to set n_attach < 0 for (family==%d) nat object.\n",
printk210net/core/net_alias.cprintk("net_alias_devinit(%s) called.\n", dev->name);
printk224net/core/net_alias.cprintk("net_alias: net_alias_hard_start_xmit() for %s called (ignored)!!\n", dev->name);
printk351net/core/net_alias.cprintk("net_alias_dev_create(%s:%d): unregistered family==%d\n",
printk494net/core/net_alias.cprintk("ERROR: net_alias_dev_delete(): incorrect non-alias device after maindev\n");
printk519net/core/net_alias.cprintk("net_alias_dev_delete(%s): bad hashing recovered\n", alias->name);
printk522net/core/net_alias.cprintk("ERROR: net_alias_dev_delete(%s): unhashed alias!\n",alias->name);
printk639net/core/net_alias.cprintk("net_alias_free(%s): '%s' is not my alias\n",
printk643net/core/net_alias.cprintk("net_alias_free(%s): found a non-alias after device!\n",
printk745net/core/net_alias.cprintk("ERROR: net_alias_rehash(): NULL sockaddr passed\n");
printk755net/core/net_alias.cprintk("ERROR: net_alias_rehash for %s: NULL maindev\n", alias->name);
printk765net/core/net_alias.cprintk("ERROR: net_alias_rehash for %s: NULL alias_info\n", alias->name);
printk776net/core/net_alias.cprintk("ERROR: net_alias_rehash(%s): unbound alias.\n", alias->name);
printk791net/core/net_alias.cprintk("ERROR: net_alias_rehash(%s): unreg family==%d.\n", alias->name, sa->sa_family);
printk817net/core/net_alias.cprintk("net_alias_rehash(%s): bad hashing recovered\n", alias->name);
printk820net/core/net_alias.cprintk("ERROR: net_alias_rehash(%s): unhashed alias!\n", alias->name);
printk971net/core/net_alias.cprintk("net_alias: NETDEV_DOWN for %s received\n", dev->name);
printk980net/core/net_alias.cprintk("net_alias: NETDEV_UP for %s received\n", dev->name);
printk1294net/core/net_alias.cprintk("register_net_alias_type(): NULL arg\n");
printk1319net/core/net_alias.cprintk("unregister_net_alias_type(): NULL arg\n");
printk1328net/core/net_alias.cprintk("unregister_net_alias_type(): has %d attachments. failed\n",
printk1345net/core/net_alias.cprintk("unregister_net_alias_type(type=%d): not found!\n", nat->type);
printk61net/core/skbuff.cprintk("Networking buffers in use          : %lu\n",net_skbcount);
printk62net/core/skbuff.cprintk("Network buffers locked by drivers  : %lu\n",net_locked);
printk63net/core/skbuff.cprintk("Total network buffer allocations   : %lu\n",net_allocs);
printk64net/core/skbuff.cprintk("Total failed network buffer allocs : %lu\n",net_fails);
printk65net/core/skbuff.cprintk("Total free while locked events     : %lu\n",net_free_locked);
printk67net/core/skbuff.cprintk("IP fragment buffer size            : %lu\n",ip_frag_mem);
printk81net/core/skbuff.cprintk("File: %s Line %d, found a bad skb-head\n",
printk86net/core/skbuff.cprintk("skb_check: head without next or prev\n");
printk91net/core/skbuff.cprintk("File: %s Line %d, bad next head-skb member\n",
printk97net/core/skbuff.cprintk("File: %s Line %d, bad prev head-skb member\n",
printk107net/core/skbuff.cprintk("bad queue element in whole queue\n");
printk119net/core/skbuff.cprintk("File: %s Line %d, bad next skb member\n",
printk125net/core/skbuff.cprintk("File: %s Line %d, bad prev skb member\n",
printk133net/core/skbuff.cprintk("File: %s Line %d, found a freed skb lurking in the undergrowth!\n",
printk135net/core/skbuff.cprintk("skb=%p, real size=%d, free=%d\n",
printk141net/core/skbuff.cprintk("File: %s Line %d, passed a non skb!\n", file,line);
printk142net/core/skbuff.cprintk("skb=%p, real size=%d, free=%d\n",
printk148net/core/skbuff.cprintk("File: %s Line %d, head > data !\n", file,line);
printk149net/core/skbuff.cprintk("skb=%p, head=%p, data=%p\n",
printk155net/core/skbuff.cprintk("File: %s Line %d, tail > end!\n", file,line);
printk156net/core/skbuff.cprintk("skb=%p, tail=%p, end=%p\n",
printk162net/core/skbuff.cprintk("File: %s Line %d, data > tail!\n", file,line);
printk163net/core/skbuff.cprintk("skb=%p, data=%p, tail=%p\n",
printk169net/core/skbuff.cprintk("File: %s Line %d, wrong length\n", file,line);
printk170net/core/skbuff.cprintk("skb=%p, data=%p, end=%p len=%ld\n",
printk176net/core/skbuff.cprintk("File: %s Line %d, control overrun\n", file,line);
printk177net/core/skbuff.cprintk("skb=%p, end=%p\n",
printk211net/core/skbuff.cprintk("Suspicious queue head: sk_buff on list!\n");
printk234net/core/skbuff.cprintk("Suspicious queue tail: sk_buff on list!\n");
printk292net/core/skbuff.cprintk("insert before unlisted item!\n");
printk294net/core/skbuff.cprintk("inserted item is already on a list.\n");
printk317net/core/skbuff.cprintk("append before unlisted item!\n");
printk319net/core/skbuff.cprintk("append item is already on a list.\n");
printk356net/core/skbuff.cprintk("skb_unlink: not a linked element\n");
printk445net/core/skbuff.cprintk("kfree_skb: skb = NULL (from %p)\n",
printk459net/core/skbuff.cprintk("Warning: kfree_skb passed an skb that nobody set the free flag on! (from %p)\n",
printk462net/core/skbuff.cprintk("Warning: kfree_skb passed an skb still on a list (from %p).\n",
printk512net/core/skbuff.cprintk("alloc_skb called nonatomically from interrupt %p\n",
printk533net/core/skbuff.cprintk("Kernel kmalloc handed us an existing skb (%p)\n",skb);
printk702net/core/skbuff.cprintk("double lock on device queue!\n");
printk711net/core/skbuff.cprintk("double unlock on device queue!\n");
printk512net/core/sock.cprintk("sock.c: Look where I am %ld<%ld\n", tmp, sk->wmem_alloc);
printk150net/ethernet/eth.cprintk("eth_rebuild_header: Don't know how to resolve type %d addresses?\n",(int)eth->h_proto);
printk233net/ethernet/eth.cprintk("eth_header_cache_bind: %04x cache is not implemented\n", htype);
printk254net/ethernet/eth.cprintk("eth_header_cache_update: %04x cache is not implemented\n", hh->hh_type);
printk258net/ipv4/af_inet.cNETDEBUG(printk("sock.c: remove_sock: sk1->prot == NULL\n"));
printk1474net/ipv4/af_inet.cprintk("Swansea University Computer Society TCP/IP for NET3.033\n");
printk1501net/ipv4/af_inet.cprintk("IP Protocols: ");
printk1506net/ipv4/af_inet.cprintk("%s%s",p->name,tmp?", ":"\n");
printk429net/ipv4/arp.cprintk("arp_expire: %08x expired\n", entry->ip);
printk450net/ipv4/arp.cprintk("arp_expire: %08x requires confirmation\n", entry->ip);
printk501net/ipv4/arp.cprintk("arp_expire_request: %08x postponed\n", entry->ip);
printk518net/ipv4/arp.cprintk("arp_expire_request: %08x timed out\n", entry->ip);
printk537net/ipv4/arp.cprintk("arp_expire_request: %08x is dead\n", entry->ip);
printk565net/ipv4/arp.cprintk("arp_expire_request: %08x is killed\n", entry->ip);
printk573net/ipv4/arp.cprintk("arp_expire_request: bug: ARP entry is lost!\n");
printk594net/ipv4/arp.cprintk("arp_device_event: bug\n");
printk648net/ipv4/arp.cprintk("ARP: no memory to send an arp packet\n");
printk711net/ipv4/arp.cprintk("arp_send_q: incomplete entry for %s\n",
printk853net/ipv4/arp.cprintk("ARP: dev->type mangled!\n");
printk1031net/ipv4/arp.cprintk("ARP: no memory for new arp entry\n");
printk1063net/ipv4/arp.cprintk("arp_rcv: %08x backlogged\n", entry->ip);
printk1146net/ipv4/arp.cprintk("ARP: arp called for own IP address\n");
printk1291net/ipv4/arp.cprintk("arp_find: %08x backlogged\n", entry->ip);
printk1528net/ipv4/arp.cprintk("arp_cache_bind: %08x backlogged\n", entry->ip);
printk1581net/ipv4/arp.cprintk("arp_run_bh: %08x reinstalled\n", sip);
printk1616net/ipv4/arp.cprintk("arp_run_bh: entry %08x was born dead\n", entry->ip);
printk1692net/ipv4/arp.cprintk("arp_req_set: bug\n");
printk1785net/ipv4/arp.cprintk("arp_req_set: bug\n");
printk1817net/ipv4/arp.cprintk("arp_req_delete: bug\n");
printk359net/ipv4/icmp.cprintk(KERN_INFO "ICMP: %s:%d: protocol unreachable.\n",
printk366net/ipv4/icmp.cprintk(KERN_INFO "ICMP: %s: fragmentation needed and DF set.\n",
printk411net/ipv4/icmp.cprintk(KERN_INFO "ICMP: %s: Source Route Failed.\n", in_ntoa(iph->daddr));
printk486net/ipv4/icmp.cprintk(KERN_INFO "icmp: ICMP redirect from %s on %s ignored.\n", in_ntoa(source), dev->name);
printk514net/ipv4/icmp.cprintk(KERN_INFO "ICMP redirect from %s\n", in_ntoa(source));
printk519net/ipv4/icmp.cprintk(KERN_INFO "ICMP: cannot handle TOS redirects yet!\n");
printk651net/ipv4/icmp.cprintk(KERN_INFO "ICMP: failed checksum from %s!\n", in_ntoa(saddr));
printk440net/ipv4/igmp.cprintk("Broken multicast host using 0.0.0.0 heard on %s\n",
printk47net/ipv4/ip_alias.cprintk("alias_init(%s) called.\n", alias->name);
printk60net/ipv4/ip_alias.cprintk("alias_done(%s) called.\n", alias->name);
printk159net/ipv4/ip_alias.cprintk("ip_alias: can't remove module");
printk268net/ipv4/ip_forward.cNETDEBUG(printk("\nIP: No memory available for IP forward\n"));
printk326net/ipv4/ip_forward.cprintk("ip_forward: hh miss %08x via %08x\n", target_addr, rt->rt_gateway);
printk375net/ipv4/ip_forward.cprintk("ip_forward(): Argh! Destination lost!\n");
printk99net/ipv4/ip_fragment.cNETDEBUG(printk("IP: frag_create: no memory left !\n"));
printk261net/ipv4/ip_fragment.cNETDEBUG(printk("IP: create: no memory left !\n"));
printk275net/ipv4/ip_fragment.cNETDEBUG(printk("IP: create: no memory left !\n"));
printk357net/ipv4/ip_fragment.cNETDEBUG(printk("IP: queue_glue: no memory for gluing queue %p\n", qp));
printk380net/ipv4/ip_fragment.cNETDEBUG(printk("Invalid fragment list: Fragment over size.\n"));
printk657net/ipv4/ip_fragment.cprintk("ip_queue_xmit: frag needed\n");
printk713net/ipv4/ip_fragment.cNETDEBUG(printk("IP: frag: no memory for new fragment!\n"));
printk724net/ipv4/ip_fragment.cprintk("IP fragmenter: BUG free!=1 in fragmenter\n");
printk101net/ipv4/ip_fw.c#define dprintf1(a)    printk(a)
printk102net/ipv4/ip_fw.c#define dprintf2(a1,a2)    printk(a1,a2)
printk103net/ipv4/ip_fw.c#define dprintf3(a1,a2,a3)  printk(a1,a2,a3)
printk104net/ipv4/ip_fw.c#define dprintf4(a1,a2,a3,a4)  printk(a1,a2,a3,a4)
printk112net/ipv4/ip_fw.c#define print_ip(a)   printk("%ld.%ld.%ld.%ld",(ntohl(a)>>24)&0xFF,\
printk430net/ipv4/ip_fw.cprintk("Accept ");
printk432net/ipv4/ip_fw.cprintk("Reject ");
printk434net/ipv4/ip_fw.cprintk("Deny ");
printk439net/ipv4/ip_fw.cprintk("TCP ");
printk442net/ipv4/ip_fw.cprintk("UDP ");
printk444net/ipv4/ip_fw.cprintk("ICMP ");
printk447net/ipv4/ip_fw.cprintk("p=%d ",ip->protocol);
printk452net/ipv4/ip_fw.cprintk(":%d", src_port);
printk453net/ipv4/ip_fw.cprintk(" ");
printk456net/ipv4/ip_fw.cprintk(":%d",dst_port);
printk457net/ipv4/ip_fw.cprintk("\n");
printk512net/ipv4/ip_fw.cprintk("Masqueraded %s %lX:%X expired\n",
printk623net/ipv4/ip_fw.cprintk("masq_revamp : added delta (%d) to seq\n",ftp->delta);
printk630net/ipv4/ip_fw.cprintk("masq_revamp : added previous_delta (%d) to seq\n",ftp->previous_delta);
printk665net/ipv4/ip_fw.cprintk("PORT %lX:%X detected\n",from,port);
printk735net/ipv4/ip_fw.cprintk("MASQUERADE: resizing needed for %d bytes (%ld)\n",diff, skb->len);
printk739net/ipv4/ip_fw.cprintk("MASQUERADE: No memory available\n");
printk813net/ipv4/ip_fw.cprintk("Outgoing %s %lX:%X -> %lX:%X\n",
printk839net/ipv4/ip_fw.cprintk("MASQUERADE: no memory left !\n");
printk895net/ipv4/ip_fw.cprintk("O-routed from %lX:%X over %s\n",ntohl(dev->pa_addr),ntohs(ms->mport),dev->name);
printk924net/ipv4/ip_fw.cprintk("Incoming %s %lX:%X -> %lX:%X\n",
printk956net/ipv4/ip_fw.cprintk("demasq : Filled out dport entry (%d) based on initial connect attempt from FTP deamon\n",ntohs(ms->dport));
printk974net/ipv4/ip_fw.cprintk("demasq : delta=%d ; previous_delta=%d ; init_seq=%lX ; ack_seq=%lX ; after=%d\n",ms->delta,ms->previous_delta,ntohl(ms->init_seq),ntohl(th->ack_seq),after(ntohl(th->ack_seq),ntohl(ms->init_seq)));
printk983net/ipv4/ip_fw.cprintk("demasq : substracted delta (%d) from ack_seq\n",ms->delta);
printk990net/ipv4/ip_fw.cprintk("demasq : substracted previous_delta (%d) from ack_seq\n",ms->previous_delta);
printk998net/ipv4/ip_fw.cprintk("I-routed to %lX:%X\n",ntohl(iph->daddr),ntohs(portptr[1]));
printk1059net/ipv4/ip_fw.cprintk("ip_fw_ctl:  malloc said no\n");
printk1243net/ipv4/ip_fw.cprintk("ip_fw_ctl:  chain is empty\n");
printk1310net/ipv4/ip_fw.cprintk("ip_fw_ctl: len=%d, want %d\n",len, sizeof(struct ip_fw));
printk1318net/ipv4/ip_fw.cprintk("ip_fw_ctl: undefined flag bits set (flags=%x)\n",
printk1327net/ipv4/ip_fw.cprintk("ip_fw_ctl: src range set but fw_nsp=%d\n",
printk1336net/ipv4/ip_fw.cprintk("ip_fw_ctl: dst range set but fw_ndp=%d\n",
printk1345net/ipv4/ip_fw.cprintk("ip_fw_ctl: too many ports (%d+%d)\n",
printk1399net/ipv4/ip_fw.cprintk("ip_acct_ctl:  unknown request %d\n",stage);
printk1405net/ipv4/ip_fw.cprintk("ip_acct_ctl:  unknown request %d\n",stage);
printk1460net/ipv4/ip_fw.cprintk("ip_fw_ctl: length=%d, expected %d\n",
printk1472net/ipv4/ip_fw.cprintk("ip_fw_ctl: ip->ihl=%d, want %d\n",ip->ihl,
printk1522net/ipv4/ip_fw.cprintk("ip_fw_ctl:  unknown request %d\n",stage);
printk1529net/ipv4/ip_fw.cprintk("ip_fw_ctl:  unknown request %d\n",stage);
printk133net/ipv4/ip_output.cprintk("ip_send: hh miss %08x via %08x\n", daddr, rt->rt_gateway);
printk166net/ipv4/ip_output.cprintk("ip_send_room: hh miss %08x via %08x\n", daddr, rt->rt_gateway);
printk342net/ipv4/ip_output.cNETDEBUG(printk("IP: ip_queue_xmit dev = NULL\n"));
printk418net/ipv4/ip_output.cNETDEBUG(printk("ip_queue_xmit: next != NULL\n"));
printk442net/ipv4/ip_output.cNETDEBUG(printk("ip.c: link3 != NULL\n"));
printk670net/ipv4/ip_output.cprintk("ip_build_xmit: hh miss %08x via %08x\n", rt->rt_dst, rt->rt_gateway);
printk846net/ipv4/ip_output.cprintk("ip_build_xmit: hh miss %08x via %08x\n", rt->rt_dst, rt->rt_gateway);
printk62net/ipv4/ipip.cprintk("ipip_rcv: got a packet!\n");
printk141net/ipv4/ipip.cprintk("ipip close: can't remove protocol\n");
printk902net/ipv4/ipmr.cprintk("Linux IP multicast router 0.04-might-work 8)\n");
printk322net/ipv4/rarp.cprintk("RARP: SETRARP: requested PA is 0.0.0.0 !\n");
printk191net/ipv4/route.cprintk("fib_free_node: fi %08x/%s is free\n", fi->fib_gateway, fi->fib_dev->name);
printk485net/ipv4/route.cprintk("fib_create_info: fi %08x/%s is duplicate\n", fi->fib_gateway, fi->fib_dev->name);
printk506net/ipv4/route.cprintk("fib_create_info: fi %08x/%s is created\n", fi->fib_gateway, fi->fib_dev->name);
printk536net/ipv4/route.cprintk("Dynamic route to my own net rejected\n");
printk628net/ipv4/route.cprintk("fib_add_1: hashing for zone %d started\n", logmask);
printk970net/ipv4/route.cprintk("rt_free: %08x\n", rt->rt_dst);
printk1003net/ipv4/route.cprintk("rt_kick_free_queue: %08x is free\n", daddr);
printk1068net/ipv4/route.cprintk("rt_check_expire clean %02x@%08x\n", i, rth->rt_dst);
printk1087net/ipv4/route.cprintk("rt_check_expire bubbled %02x@%08x<->%08x\n", i, rth->rt_dst, rth_next->rt_dst);
printk1165net/ipv4/route.cprintk("rt_cache_flush: %d@%02x\n", nr, i);
printk1171net/ipv4/route.cprintk("rt_cache_flush: bug rt_cache_size=%d\n", rt_cache_size);
printk1379net/ipv4/route.cprintk("rt_cache_add: ip_rt_lock==%d\n", ip_rt_lock);
printk1420net/ipv4/route.cprintk("rt_cache @%02x: %08x", hash, daddr);
printk1422net/ipv4/route.cprintk(" . %08x", trth->rt_dst);
printk1423net/ipv4/route.cprintk("\n");
printk1446net/ipv4/route.cprintk("rt_cache clean %02x@%08x\n", hash, rth->rt_dst);
printk1474net/ipv4/route.cprintk("rt_cache miss @%08x\n", daddr);
printk1498net/ipv4/route.cprintk("rt_route failed @%08x\n", daddr);
printk1550net/ipv4/route.cprintk("rt_cache: route to %08x was born dead\n", daddr);
printk500net/ipv4/tcp.cprintk("TCP sk=%p, State %s -> %s\n",sk, statename[sk->state],statename[state]);
printk714net/ipv4/tcp.cprintk("tcp_do_retransmit: hh miss %08x via %08x\n", iph->daddr, rt->rt_gateway);
printk801net/ipv4/tcp.cprintk("Error: Negative timer in xmit_timer\n");
printk1043net/ipv4/tcp.cprintk ("rexmit_timer: timer expired - reason unknown\n");
printk1153net/ipv4/tcp.cprintk("tcp_readable: %p - ",sk);
printk1161net/ipv4/tcp.cprintk("empty\n");
printk1211net/ipv4/tcp.cprintk("got %lu bytes.\n",amount);
printk1389net/ipv4/tcp.cprintk("tcp_send_skb: bad skb (skb = %p, data = %p, th = %p, len = %lu)\n",
printk1405net/ipv4/tcp.cprintk("tcp_send_skb: attempt to queue a bogon.\n");
printk1436net/ipv4/tcp.cprintk("tcp_send_partial: next != NULL\n");
printk1661net/ipv4/tcp.cprintk("\rtcp_ack: seq %x ack %x\n", sequence, ack);
printk1869net/ipv4/tcp.cprintk("TCP: **bug**: \"copy\" <= 0\n");
printk2153net/ipv4/tcp.cprintk("cleaning rbuf for sk=%p\n", sk);
printk2184net/ipv4/tcp.cprintk("sk->rspace = %lu, was %lu\n", sock_rspace(sk),
printk2612net/ipv4/tcp.cprintk("tcp_send_fin: Impossible malloc failure");
printk2679net/ipv4/tcp.cprintk("tcp_send_fin: next != NULL\n");
printk2951net/ipv4/tcp.cprintk("Reset on %p: Connect on dead socket.\n",sk);
printk3443net/ipv4/tcp.cprintk("Ack ignored %u %u\n",ack,sk->sent_seq);
printk3651net/ipv4/tcp.cprintk("INET: tcp.c: *** bug send_list out of order.\n");
printk3875net/ipv4/tcp.cprintk("rcv_ack_seq: %X==%X, acked_seq: %X==%X\n",
printk4158net/ipv4/tcp.cprintk("Data arrived on %p after close [Data right edge %X, Socket shut on %X] %d\n",
printk4201net/ipv4/tcp.cprintk("skb1=%p :", skb1);
printk4202net/ipv4/tcp.cprintk("skb1->seq = %d: ", skb1->seq);
printk4203net/ipv4/tcp.cprintk("skb->seq = %d\n",skb->seq);
printk4204net/ipv4/tcp.cprintk("copied_seq = %d acked_seq = %d\n", sk->copied_seq,
printk4253net/ipv4/tcp.cprintk("*** tcp.c:tcp_data bug acked < copied\n");
printk4339net/ipv4/tcp.cprintk("Ack queued.\n");
printk4365net/ipv4/tcp.cprintk("INET: tcp.c:tcp_data memory leak detected.\n");
printk4397net/ipv4/tcp.cprintk("Data wakeup.\n");
printk4834net/ipv4/tcp.cprintk("Cache mismatch on TCP.\n");
printk4931net/ipv4/tcp.cprintk("IMPOSSIBLE 3\n");
printk5103net/ipv4/tcp.cprintk("Doing a BSD time wait\n");
printk123net/ipv4/timer.cprintk ("non dead socket in time_done\n");
printk156net/ipv4/timer.cprintk ("net_timer: timer expired - reason %d is unknown\n", why);
printk622net/ipv4/udp.cNETDEBUG(printk("UDP: short packet: %d/%d\n", ulen, len));
printk647net/ipv4/udp.cNETDEBUG(printk("UDP: bad checksum. From %08lX:%d to %08lX:%d ulen %d\n",
printk639net/ipx/af_ipx.cprintk("IPX: Network number collision %lx\n\t%s %s and %s %s\n",
printk1584net/ipx/af_ipx.cprintk("IPX: bind failed because port %X in use.\n",
printk1593net/ipx/af_ipx.cprintk("IPX: socket is bound.\n");
printk1712net/ipx/af_ipx.cprintk("%s-%04X: %s\n",str,l*8,b);
printk1717net/ipx/af_ipx.cprintk("%s: %08X:%02X%02X%02X%02X%02X%02X:%04X\n",
printk1723net/ipx/af_ipx.cprintk("%s: CHKSUM=%04X SIZE=%d (%04X) HOPS=%d (%02X) TYPE=%02X\n",
printk2023net/ipx/af_ipx.cprintk("IPX: Unable to register with 802.2\n");
printk2026net/ipx/af_ipx.cprintk("IPX: Unable to register with SNAP\n");
printk2049net/ipx/af_ipx.cprintk("Swansea University Computer Society IPX 0.33 for NET3.032\n");
printk2050net/ipx/af_ipx.cprintk("IPX Portions Copyright (c) 1995 Caldera, Inc.\n");
printk220net/netlink.cprintk("netlink: unable to get major %d\n", NETLINK_MAJOR);
printk235net/netlink.cprintk("Network Kernel/User communications module 0.03\n");
printk692net/netrom/af_netrom.cprintk("NET/ROM: bind failed: in use\n");
printk699net/netrom/af_netrom.cprintk("NET/ROM: bind failed: invalid node callsign\n");
printk730net/netrom/af_netrom.cprintk("NET/ROM: socket is bound\n");
printk1066net/netrom/af_netrom.cprintk("NET/ROM: sendto: Addresses built.\n");
printk1070net/netrom/af_netrom.cprintk("NET/ROM: sendto: building packet.\n");
printk1090net/netrom/af_netrom.cprintk("Building NET/ROM Header.\n");
printk1101net/netrom/af_netrom.cprintk("Built header.\n");
printk1112net/netrom/af_netrom.cprintk("NET/ROM: Appending user data\n");
printk1118net/netrom/af_netrom.cprintk("NET/ROM: Transmitting buffer\n");
printk1371net/netrom/af_netrom.cprintk("G4KLX NET/ROM for Linux. Version 0.4 ALPHA for AX25.030 Linux 1.3.45\n");
printk174net/netrom/nr_dev.cprintk("netrom: xmit call when iface is down\n");
printk319net/netrom/nr_in.cprintk("nr_process_rx_frame: frame received - state: %d\n", sk->nr->state);
printk171net/netrom/nr_subr.cprintk("nr_write_internal: invalid frame type %d\n", frametype);
printk549net/socket.cprintk("NET: sys_socket: no more sockets\n");
printk724net/socket.cprintk("NET: sock_accept: no more sockets\n");
printk1344net/socket.cprintk("Swansea University Computer Society NET3.033 for Linux 1.3.50\n");
printk1039net/unix/af_unix.cprintk("NET3: Unix domain sockets 0.10 BETA for Linux NET3.033.\n");