tag | line | file | source code |
outb | 394 | arch/alpha/kernel/bios32.c | outb((1<<(9-8)) | (1<<(10-8)) | (1<<(11-8)) | (1<<(15-8)), 0x4d1); |
outb | 480 | arch/alpha/kernel/bios32.c | outb(0, 0x26e); /* set the index register for reg #0 */ |
outb | 485 | arch/alpha/kernel/bios32.c | outb(0, 0x26e); /* set the index register for reg #0 */ |
outb | 486 | arch/alpha/kernel/bios32.c | outb(data | 0x40, 0x26f); /* turn on IDE */ |
outb | 487 | arch/alpha/kernel/bios32.c | outb(data | 0x40, 0x26f); /* yes, we really mean it... */ |
outb | 489 | arch/alpha/kernel/bios32.c | outb(0, 0x26e); data = inb(0x26f); |
outb | 40 | arch/alpha/kernel/irq.c | outb(cache_21,0x21); |
outb | 46 | arch/alpha/kernel/irq.c | outb(cache_A1,0xA1); |
outb | 60 | arch/alpha/kernel/irq.c | outb(cache_21,0x21); |
outb | 66 | arch/alpha/kernel/irq.c | outb(cache_A1,0xA1); |
outb | 112 | arch/alpha/kernel/irq.c | outb(0xE0 | (irq - 8), 0xa0); |
outb | 116 | arch/alpha/kernel/irq.c | outb(0xE0 | irq, 0x20); |
outb | 123 | arch/alpha/kernel/irq.c | outb(cache_21, 0x21); |
outb | 126 | arch/alpha/kernel/irq.c | outb(cache_A1, 0xA1); |
outb | 134 | arch/alpha/kernel/irq.c | outb(cache_21, 0x21); |
outb | 137 | arch/alpha/kernel/irq.c | outb(cache_A1, 0xA1); |
outb | 163 | arch/alpha/kernel/irq.c | outb(cache_21,0x21); |
outb | 168 | arch/alpha/kernel/irq.c | outb(cache_21,0x21); |
outb | 169 | arch/alpha/kernel/irq.c | outb(cache_A1,0xA1); |
outb | 217 | arch/alpha/kernel/irq.c | outb(0x0c, 0x3fc); |
outb | 218 | arch/alpha/kernel/irq.c | outb(0x0c, 0x2fc); |
outb | 219 | arch/alpha/kernel/irq.c | outb(0,0x61); |
outb | 220 | arch/alpha/kernel/irq.c | outb(0,0x461); |
outb | 204 | arch/alpha/lib/io.c | outb(*(char *)src, port); |
outb | 47 | arch/i386/kernel/irq.c | outb(cache_21,0x21); |
outb | 53 | arch/i386/kernel/irq.c | outb(cache_A1,0xA1); |
outb | 67 | arch/i386/kernel/irq.c | outb(cache_21,0x21); |
outb | 73 | arch/i386/kernel/irq.c | outb(cache_A1,0xA1); |
outb | 236 | arch/i386/kernel/irq.c | outb(cache_21,0x21); |
outb | 240 | arch/i386/kernel/irq.c | outb(cache_21,0x21); |
outb | 241 | arch/i386/kernel/irq.c | outb(cache_A1,0xA1); |
outb | 264 | arch/i386/kernel/irq.c | outb(cache_21,0x21); |
outb | 267 | arch/i386/kernel/irq.c | outb(cache_A1,0xA1); |
outb | 290 | arch/i386/kernel/irq.c | outb(0,0xF0); |
outb | 357 | arch/i386/kernel/irq.c | outb(LATCH >> 8 , 0x40); /* MSB */ |
outb | 96 | arch/i386/kernel/process.c | outb(0xfe,0x64); /* pulse reset low */ |
outb | 53 | arch/mips/kernel/irq.c | outb(cache_21,0x21); |
outb | 59 | arch/mips/kernel/irq.c | outb(cache_A1,0xA1); |
outb | 73 | arch/mips/kernel/irq.c | outb(cache_21,0x21); |
outb | 79 | arch/mips/kernel/irq.c | outb(cache_A1,0xA1); |
outb | 188 | arch/mips/kernel/irq.c | outb(cache_21,0x21); |
outb | 192 | arch/mips/kernel/irq.c | outb(cache_21,0x21); |
outb | 193 | arch/mips/kernel/irq.c | outb(cache_A1,0xA1); |
outb | 216 | arch/mips/kernel/irq.c | outb(cache_21,0x21); |
outb | 219 | arch/mips/kernel/irq.c | outb(cache_A1,0xA1); |
outb | 290 | arch/mips/kernel/irq.c | outb(LATCH >> 8 , 0x40); /* MSB */ |
outb | 398 | drivers/block/aztcd.c | outb(POLLED,MODE_PORT); |
outb | 406 | drivers/block/aztcd.c | { outb((unsigned char) cmd,CMD_PORT); |
outb | 438 | drivers/block/aztcd.c | outb(params -> start.min,CMD_PORT); |
outb | 439 | drivers/block/aztcd.c | outb(params -> start.sec,CMD_PORT); |
outb | 440 | drivers/block/aztcd.c | outb(params -> start.frame,CMD_PORT); |
outb | 441 | drivers/block/aztcd.c | outb(params -> end.min,CMD_PORT); |
outb | 442 | drivers/block/aztcd.c | outb(params -> end.sec,CMD_PORT); |
outb | 443 | drivers/block/aztcd.c | outb(params -> end.frame,CMD_PORT); |
outb | 1454 | drivers/block/aztcd.c | outb(POLLED,MODE_PORT); /*???*/ |
outb | 1457 | drivers/block/aztcd.c | outb(ACMD_GET_VERSION,CMD_PORT); /*Try to get version info*/ |
outb | 1465 | drivers/block/aztcd.c | outb(POLLED,MODE_PORT); /*???*/ |
outb | 1468 | drivers/block/aztcd.c | outb(ACMD_SOFT_RESET,CMD_PORT); /*send reset*/ |
outb | 1490 | drivers/block/aztcd.c | outb(POLLED,MODE_PORT); /*???*/ |
outb | 1493 | drivers/block/aztcd.c | outb(ACMD_GET_VERSION,CMD_PORT); /*GetVersion*/ |
outb | 355 | drivers/block/cdu31a.c | outb(curr_control_reg, sony_cd_control_reg); |
outb | 364 | drivers/block/cdu31a.c | outb(curr_control_reg, sony_cd_control_reg); |
outb | 457 | drivers/block/cdu31a.c | outb(SONY_DRIVE_RESET_BIT, sony_cd_control_reg); |
outb | 463 | drivers/block/cdu31a.c | outb(curr_control_reg | SONY_ATTN_CLR_BIT, sony_cd_control_reg); |
outb | 469 | drivers/block/cdu31a.c | outb(curr_control_reg | SONY_RES_RDY_CLR_BIT, sony_cd_control_reg); |
outb | 475 | drivers/block/cdu31a.c | outb(curr_control_reg | SONY_DATA_RDY_CLR_BIT, sony_cd_control_reg); |
outb | 481 | drivers/block/cdu31a.c | outb(curr_control_reg | SONY_PARAM_CLR_BIT, sony_cd_control_reg); |
outb | 505 | drivers/block/cdu31a.c | outb(param, sony_cd_param_reg); |
outb | 511 | drivers/block/cdu31a.c | outb(curr_control_reg | SONY_RES_RDY_INT_EN_BIT, sony_cd_control_reg); |
outb | 512 | drivers/block/cdu31a.c | outb(cmd, sony_cd_cmd_reg); |
outb | 2852 | drivers/block/cdu31a.c | outb(0xbc, 0x9a01); |
outb | 2853 | drivers/block/cdu31a.c | outb(0xe2, 0x9a01); |
outb | 1679 | drivers/block/floppy.c | outb(FDCS->dor, FD_DOR); |
outb | 542 | drivers/block/gscd.c | outb ( curr_drv_state, GSCDPORT(0)); |
outb | 583 | drivers/block/gscd.c | outb ( result, GSCDPORT(2)); |
outb | 682 | drivers/block/gscd.c | outb ( *pstr, GSCDPORT(2) ); |
outb | 699 | drivers/block/gscd.c | outb ( curr_drv_state, GSCDPORT(0)); |
outb | 230 | drivers/block/ide.c | #define OUT_BYTE(b,p) outb((b),IDE_PORT(p,DEV_HWIF)) |
outb | 252 | drivers/block/mcd.c | outb(MCMD_GET_STATUS, MCDPORT(0)); /* send get-status cmd */ |
outb | 332 | drivers/block/mcd.c | outb(MCMD_STOP, MCDPORT(0)); |
outb | 344 | drivers/block/mcd.c | outb(MCMD_STOP, MCDPORT(0)); |
outb | 416 | drivers/block/mcd.c | outb(MCMD_STOP, MCDPORT(0)); |
outb | 552 | drivers/block/mcd.c | outb(MCMD_SET_VOLUME, MCDPORT(0)); |
outb | 553 | drivers/block/mcd.c | outb(volctrl.channel0, MCDPORT(0)); |
outb | 554 | drivers/block/mcd.c | outb(255, MCDPORT(0)); |
outb | 555 | drivers/block/mcd.c | outb(volctrl.channel1, MCDPORT(0)); |
outb | 556 | drivers/block/mcd.c | outb(255, MCDPORT(0)); |
outb | 576 | drivers/block/mcd.c | outb(MCMD_STOP, MCDPORT(0)); |
outb | 582 | drivers/block/mcd.c | outb(MCMD_EJECT, MCDPORT(0)); |
outb | 793 | drivers/block/mcd.c | outb(MCMD_GET_STATUS, MCDPORT(0)); |
outb | 829 | drivers/block/mcd.c | outb(MCMD_SET_MODE, MCDPORT(0)); |
outb | 830 | drivers/block/mcd.c | outb(1, MCDPORT(0)); |
outb | 997 | drivers/block/mcd.c | outb(MCMD_STOP, MCDPORT(0)); |
outb | 1005 | drivers/block/mcd.c | outb(MCMD_STOP, MCDPORT(0)); |
outb | 1011 | drivers/block/mcd.c | outb(MCMD_STOP, MCDPORT(0)); |
outb | 1221 | drivers/block/mcd.c | outb(0, MCDPORT(1)); /* send reset */ |
outb | 1225 | drivers/block/mcd.c | outb(0x40, MCDPORT(0)); /* send get-stat cmd */ |
outb | 1241 | drivers/block/mcd.c | outb(MCMD_GET_VERSION,MCDPORT(0)); |
outb | 1273 | drivers/block/mcd.c | outb(4,MCDPORT(2)); /* magic happens */ |
outb | 1288 | drivers/block/mcd.c | outb(MCMD_CONFIG_DRIVE, MCDPORT(0)); |
outb | 1289 | drivers/block/mcd.c | outb(0x02,MCDPORT(0)); |
outb | 1290 | drivers/block/mcd.c | outb(0x00,MCDPORT(0)); |
outb | 1293 | drivers/block/mcd.c | outb(MCMD_CONFIG_DRIVE, MCDPORT(0)); |
outb | 1294 | drivers/block/mcd.c | outb(0x10,MCDPORT(0)); |
outb | 1295 | drivers/block/mcd.c | outb(0x04,MCDPORT(0)); |
outb | 1369 | drivers/block/mcd.c | outb(cmd, MCDPORT(0)); |
outb | 1370 | drivers/block/mcd.c | outb(params -> start.min, MCDPORT(0)); |
outb | 1371 | drivers/block/mcd.c | outb(params -> start.sec, MCDPORT(0)); |
outb | 1372 | drivers/block/mcd.c | outb(params -> start.frame, MCDPORT(0)); |
outb | 1373 | drivers/block/mcd.c | outb(params -> end.min, MCDPORT(0)); |
outb | 1374 | drivers/block/mcd.c | outb(params -> end.sec, MCDPORT(0)); |
outb | 1375 | drivers/block/mcd.c | outb(params -> end.frame, MCDPORT(0)); |
outb | 1480 | drivers/block/mcd.c | outb(MCMD_GET_Q_CHANNEL, MCDPORT(0)); |
outb | 1535 | drivers/block/mcd.c | outb(MCMD_GET_DISK_INFO, MCDPORT(0)); |
outb | 1591 | drivers/block/mcd.c | outb(MCMD_STOP, MCDPORT(0)); |
outb | 1601 | drivers/block/mcd.c | outb(MCMD_SET_MODE, MCDPORT(0)); |
outb | 1602 | drivers/block/mcd.c | outb(0x05, MCDPORT(0)); /* mode: toc */ |
outb | 1632 | drivers/block/mcd.c | outb(MCMD_SET_MODE, MCDPORT(0)); |
outb | 1633 | drivers/block/mcd.c | outb(0x01, MCDPORT(0)); |
outb | 1062 | drivers/block/mcdx.c | outb(0x50, (unsigned int) stuffp->wreg_chn); /* irq 11 -> channel register */ |
outb | 1512 | drivers/block/mcdx.c | outb(0, (unsigned int) stuffp->wreg_chn); /* no dma, no irq -> hardware */ |
outb | 1513 | drivers/block/mcdx.c | outb(0, (unsigned int) stuffp->wreg_reset); /* hw reset */ |
outb | 182 | drivers/block/optcd.c | outb(HCON_DTS, HCON_PORT); /* Enable Suspend Data Transfer */ |
outb | 183 | drivers/block/optcd.c | outb(cmd, COMIN_PORT); /* Send command code */ |
outb | 190 | drivers/block/optcd.c | outb(HCON_SDRQB, HCON_PORT); /* Disable Suspend Data Transfer */ |
outb | 202 | drivers/block/optcd.c | outb(params -> start.min, COMIN_PORT); |
outb | 203 | drivers/block/optcd.c | outb(params -> start.sec, COMIN_PORT); |
outb | 204 | drivers/block/optcd.c | outb(params -> start.frame, COMIN_PORT); |
outb | 205 | drivers/block/optcd.c | outb(params -> end.min, COMIN_PORT); |
outb | 206 | drivers/block/optcd.c | outb(params -> end.sec, COMIN_PORT); |
outb | 207 | drivers/block/optcd.c | outb(params -> end.frame, COMIN_PORT); |
outb | 287 | drivers/block/optcd.c | outb(0, RESET_PORT); |
outb | 302 | drivers/block/optcd.c | outb(HCON_SDRQB, HCON_PORT); /* Disable Suspend Data Transfer */ |
outb | 249 | drivers/block/sjcd.c | outb( cmd, SJCDPORT( 0 ) ); |
outb | 262 | drivers/block/sjcd.c | outb( cmd, SJCDPORT( 0 ) ); |
outb | 263 | drivers/block/sjcd.c | outb( a, SJCDPORT( 0 ) ); |
outb | 277 | drivers/block/sjcd.c | outb( cmd, SJCDPORT( 0 ) ); |
outb | 278 | drivers/block/sjcd.c | outb( a, SJCDPORT( 0 ) ); |
outb | 279 | drivers/block/sjcd.c | outb( b, SJCDPORT( 0 ) ); |
outb | 280 | drivers/block/sjcd.c | outb( c, SJCDPORT( 0 ) ); |
outb | 281 | drivers/block/sjcd.c | outb( d, SJCDPORT( 0 ) ); |
outb | 294 | drivers/block/sjcd.c | outb( cmd, SJCDPORT( 0 ) ); |
outb | 295 | drivers/block/sjcd.c | outb( pms->start.min, SJCDPORT( 0 ) ); |
outb | 296 | drivers/block/sjcd.c | outb( pms->start.sec, SJCDPORT( 0 ) ); |
outb | 297 | drivers/block/sjcd.c | outb( pms->start.frame, SJCDPORT( 0 ) ); |
outb | 298 | drivers/block/sjcd.c | outb( pms->end.min, SJCDPORT( 0 ) ); |
outb | 299 | drivers/block/sjcd.c | outb( pms->end.sec, SJCDPORT( 0 ) ); |
outb | 300 | drivers/block/sjcd.c | outb( pms->end.frame, SJCDPORT( 0 ) ); |
outb | 1455 | drivers/block/sjcd.c | #define ISP16_IN(p) (outb(isp16_ctrl,ISP16_CTRL_PORT), inb(p)) |
outb | 1456 | drivers/block/sjcd.c | #define ISP16_OUT(p,b) (outb(isp16_ctrl,ISP16_CTRL_PORT), outb(b,p)) |
outb | 314 | drivers/block/sonycd535.c | outb(curr_control_reg, sony_cd_control_reg); |
outb | 328 | drivers/block/sonycd535.c | outb(curr_control_reg, sony_cd_control_reg); |
outb | 375 | drivers/block/sonycd535.c | outb(select_mask, select_unit_reg); |
outb | 448 | drivers/block/sonycd535.c | outb(SONY535_REQUEST_AUDIO_STATUS, command_reg); |
outb | 467 | drivers/block/sonycd535.c | outb(SONY535_REQUEST_DRIVE_STATUS_2, command_reg); |
outb | 552 | drivers/block/sonycd535.c | outb(cmd[i], command_reg); |
outb | 640 | drivers/block/sonycd535.c | outb(cmd_buff[i], command_reg); |
outb | 1577 | drivers/block/sonycd535.c | outb(0, read_status_reg); /* does a reset? */ |
outb | 1610 | drivers/block/sonycd535.c | outb(0, read_status_reg); /* does a reset? */ |
outb | 390 | drivers/block/xd.c | outb(0,XD_CONTROL); /* acknowledge interrupt */ |
outb | 454 | drivers/block/xd.c | outb(0,XD_SELECT); |
outb | 455 | drivers/block/xd.c | outb(mode,XD_CONTROL); |
outb | 470 | drivers/block/xd.c | outb(outdata ? *outdata++ : 0,XD_DATA); |
outb | 484 | drivers/block/xd.c | outb(command ? *command++ : 0,XD_DATA); |
outb | 535 | drivers/block/xd.c | outb(0,XD_RESET); /* reset the controller */ |
outb | 618 | drivers/block/xd.c | outb(0,XD_RESET); /* reset the controller */ |
outb | 652 | drivers/block/xd.c | outb(0,XD_RESET); /* reset the controller */ |
outb | 38 | drivers/char/atixlmouse.c | #define ATIXL_MSE_DISABLE_UPDATE() { outb( 0x07, ATIXL_MSE_CONTROL_PORT ); \ |
outb | 39 | drivers/char/atixlmouse.c | outb( (0x20 | inb( ATIXL_MSE_DATA_PORT )), ATIXL_MSE_DATA_PORT ); } |
outb | 42 | drivers/char/atixlmouse.c | #define ATIXL_MSE_ENABLE_UPDATE() { outb( 0x07, ATIXL_MSE_CONTROL_PORT ); \ |
outb | 43 | drivers/char/atixlmouse.c | outb( (0xdf & inb( ATIXL_MSE_DATA_PORT )), ATIXL_MSE_DATA_PORT ); } |
outb | 46 | drivers/char/atixlmouse.c | #define ATIXL_MSE_INT_OFF() { outb( 0x07, ATIXL_MSE_CONTROL_PORT ); \ |
outb | 47 | drivers/char/atixlmouse.c | outb( (0xe7 & inb( ATIXL_MSE_DATA_PORT )), ATIXL_MSE_DATA_PORT ); } |
outb | 50 | drivers/char/atixlmouse.c | #define ATIXL_MSE_INT_ON() { outb( 0x07, ATIXL_MSE_CONTROL_PORT ); \ |
outb | 51 | drivers/char/atixlmouse.c | outb( (0x08 | inb( ATIXL_MSE_DATA_PORT )), ATIXL_MSE_DATA_PORT ); } |
outb | 71 | drivers/char/atixlmouse.c | outb(ATIXL_MSE_READ_X, ATIXL_MSE_CONTROL_PORT); /* Select IR1 - X movement */ |
outb | 73 | drivers/char/atixlmouse.c | outb(ATIXL_MSE_READ_Y, ATIXL_MSE_CONTROL_PORT); /* Select IR2 - Y movement */ |
outb | 75 | drivers/char/atixlmouse.c | outb(ATIXL_MSE_READ_BUTTONS, ATIXL_MSE_CONTROL_PORT); /* Select IR0 - Button Status */ |
outb | 187 | drivers/char/atixlmouse.c | outb(0x80, ATIXL_MSE_CONTROL_PORT); /* Reset the Inport device */ |
outb | 188 | drivers/char/atixlmouse.c | outb(0x07, ATIXL_MSE_CONTROL_PORT); /* Select Internal Register 7 */ |
outb | 189 | drivers/char/atixlmouse.c | outb(0x0a, ATIXL_MSE_DATA_PORT); /* Data Interrupts 8+, 1=30hz, 2=50hz, 3=100hz, 4=200hz rate */ |
outb | 53 | drivers/char/busmouse.c | outb(MSE_READ_X_LOW, MSE_CONTROL_PORT); |
outb | 55 | drivers/char/busmouse.c | outb(MSE_READ_X_HIGH, MSE_CONTROL_PORT); |
outb | 57 | drivers/char/busmouse.c | outb(MSE_READ_Y_LOW, MSE_CONTROL_PORT ); |
outb | 59 | drivers/char/busmouse.c | outb(MSE_READ_Y_HIGH, MSE_CONTROL_PORT); |
outb | 221 | drivers/char/busmouse.c | outb(MSE_CONFIG_BYTE, MSE_CONFIG_PORT); |
outb | 222 | drivers/char/busmouse.c | outb(MSE_SIGNATURE_BYTE, MSE_SIGNATURE_PORT); |
outb | 229 | drivers/char/busmouse.c | outb(MSE_DEFAULT_MODE, MSE_CONFIG_PORT); |
outb | 178 | drivers/char/keyboard.c | outb(c,0x64); |
outb | 1189 | drivers/char/keyboard.c | outb(0x60,0x64); /* write PS/2 Mode Register */ |
outb | 1191 | drivers/char/keyboard.c | outb(0x65,0x60); /* KCC | DMS | SYS | EKI */ |
outb | 143 | drivers/char/mem.c | outb(get_user(tmp),i); |
outb | 49 | drivers/char/msbusmouse.c | outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT); |
outb | 50 | drivers/char/msbusmouse.c | outb((inb(MS_MSE_DATA_PORT) | 0x20), MS_MSE_DATA_PORT); |
outb | 52 | drivers/char/msbusmouse.c | outb(MS_MSE_READ_X, MS_MSE_CONTROL_PORT); |
outb | 55 | drivers/char/msbusmouse.c | outb(MS_MSE_READ_Y, MS_MSE_CONTROL_PORT); |
outb | 58 | drivers/char/msbusmouse.c | outb(MS_MSE_READ_BUTTONS, MS_MSE_CONTROL_PORT); |
outb | 61 | drivers/char/msbusmouse.c | outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT); |
outb | 62 | drivers/char/msbusmouse.c | outb((inb(MS_MSE_DATA_PORT) & 0xdf), MS_MSE_DATA_PORT); |
outb | 93 | drivers/char/msbusmouse.c | outb(MS_MSE_START, MS_MSE_CONTROL_PORT); |
outb | 239 | drivers/char/serial.c | outb(info->hub6 - 1 + offset, info->port); |
outb | 250 | drivers/char/serial.c | outb(info->hub6 - 1 + offset, info->port); |
outb | 265 | drivers/char/serial.c | outb(info->hub6 - 1 + offset, info->port); |
outb | 266 | drivers/char/serial.c | outb(value, info->port+1); |
outb | 269 | drivers/char/serial.c | outb(value, info->port+offset); |
outb | 277 | drivers/char/serial.c | outb(info->hub6 - 1 + offset, info->port); |
outb | 282 | drivers/char/serial.c | outb(value, info->port+offset); |
outb | 2458 | drivers/char/serial.c | outb(0xff, 0x080); |
outb | 151 | drivers/char/vt.c | outb(inb_p(0x61)&0xFC, 0x61); |
outb | 169 | drivers/char/vt.c | outb((count >> 8) & 0xff, 0x42); |
outb | 258 | drivers/net/3c501.c | outb(AX_LOOP + 1, AX_CMD); |
outb | 260 | drivers/net/3c501.c | outb(0x00, AX_CMD); |
outb | 271 | drivers/net/3c501.c | outb(AX_RESET+AX_LOOP, AX_CMD); /* Loopback mode. */ |
outb | 327 | drivers/net/3c501.c | outb(AX_RX, AX_CMD); /* Aux control, irq and receive enabled */ |
outb | 349 | drivers/net/3c501.c | outb(TX_NORM, TX_CMD); |
outb | 350 | drivers/net/3c501.c | outb(RX_NORM, RX_CMD); |
outb | 351 | drivers/net/3c501.c | outb(AX_OFF, AX_CMD); /* Just trigger a false interrupt. */ |
outb | 352 | drivers/net/3c501.c | outb(AX_RX, AX_CMD); /* Aux control, irq and receive enabled */ |
outb | 385 | drivers/net/3c501.c | outb(AX_SYS, AX_CMD); |
outb | 406 | drivers/net/3c501.c | outb(AX_XMIT, AX_CMD); /* fire ... Trigger xmit. */ |
outb | 473 | drivers/net/3c501.c | outb(AX_SYS, AX_CMD); |
outb | 481 | drivers/net/3c501.c | outb(AX_SYS, AX_CMD); |
outb | 483 | drivers/net/3c501.c | outb(AX_XMIT, AX_CMD); |
outb | 538 | drivers/net/3c501.c | outb(AX_RX, AX_CMD); |
outb | 573 | drivers/net/3c501.c | outb(AX_SYS, AX_CMD); |
outb | 609 | drivers/net/3c501.c | outb(AX_RESET, AX_CMD); /* Reset the chip */ |
outb | 610 | drivers/net/3c501.c | outb(AX_LOOP, AX_CMD); /* Aux control, irq and loopback enabled */ |
outb | 614 | drivers/net/3c501.c | outb(dev->dev_addr[i], ioaddr + i); |
outb | 619 | drivers/net/3c501.c | outb(TX_NORM, TX_CMD); /* tx irq on done, collision */ |
outb | 620 | drivers/net/3c501.c | outb(RX_NORM, RX_CMD); /* Set Rx commands. */ |
outb | 641 | drivers/net/3c501.c | outb(AX_RESET, AX_CMD); /* Reset the chip */ |
outb | 667 | drivers/net/3c501.c | outb(RX_MULT, RX_CMD); |
outb | 670 | drivers/net/3c501.c | outb(RX_PROM, RX_CMD); |
outb | 673 | drivers/net/3c501.c | outb(RX_NORM, RX_CMD); |
outb | 166 | drivers/net/3c503.c | outb(ECNTRL_SAPROM|ECNTRL_THIN, ioaddr + 0x406); |
outb | 171 | drivers/net/3c503.c | outb(saved_406, ioaddr + 0x406); |
outb | 193 | drivers/net/3c503.c | outb(ECNTRL_THIN, ioaddr + 0x406); |
outb | 197 | drivers/net/3c503.c | outb(EGACFR_NORM, ioaddr + 0x405); /* Enable RAM */ |
outb | 286 | drivers/net/3c503.c | outb(EGACFR_NORM, E33G_GACFR); /* Enable RAM and interrupts. */ |
outb | 299 | drivers/net/3c503.c | outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */ |
outb | 317 | drivers/net/3c503.c | outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */ |
outb | 353 | drivers/net/3c503.c | outb(ei_status.rx_start_page, E33G_STARTPG); |
outb | 354 | drivers/net/3c503.c | outb(ei_status.stop_page, E33G_STOPPG); |
outb | 357 | drivers/net/3c503.c | outb(0xff, E33G_VP2); /* Point at the ROM restart location 0xffff0 */ |
outb | 358 | drivers/net/3c503.c | outb(0xff, E33G_VP1); |
outb | 359 | drivers/net/3c503.c | outb(0x00, E33G_VP0); |
outb | 363 | drivers/net/3c503.c | outb(EGACFR_NORM, E33G_GACFR); |
outb | 383 | drivers/net/3c503.c | outb(EGACFR_NORM, E33G_GACFR); /* Enable RAM and interrupts. */ |
outb | 396 | drivers/net/3c503.c | outb(0x00, E33G_DMAAL); |
outb | 412 | drivers/net/3c503.c | outb(buf[i], E33G_FIFOH); |
outb | 441 | drivers/net/3c503.c | outb(ring_offset & 0xff, E33G_DMAAL); |
outb | 156 | drivers/net/3c505.c | outb(val, base_addr+PORT_CONTROL); |
outb | 162 | drivers/net/3c505.c | outb(val, base_addr+PORT_COMMAND); |
outb | 335 | drivers/net/3c507.c | outb(0x00, ID_PORT); |
outb | 337 | drivers/net/3c507.c | outb(lrs_state, ID_PORT); |
outb | 342 | drivers/net/3c507.c | outb(0x00, ID_PORT); |
outb | 376 | drivers/net/3c507.c | outb(0x01, ioaddr + MISC_CTRL); |
outb | 472 | drivers/net/3c507.c | outb(0, ioaddr + SIGNAL_CA); /* Issue channel-attn. */ |
outb | 495 | drivers/net/3c507.c | outb(0x80, ioaddr + MISC_CTRL); |
outb | 499 | drivers/net/3c507.c | outb(0x84, ioaddr + MISC_CTRL); |
outb | 537 | drivers/net/3c507.c | outb(0x80, ioaddr + MISC_CTRL); |
outb | 600 | drivers/net/3c507.c | outb(0, ioaddr + SIGNAL_CA); /* Issue channel-attn. */ |
outb | 603 | drivers/net/3c507.c | outb(0, ioaddr + RESET_IRQ); |
outb | 606 | drivers/net/3c507.c | outb(0x84, ioaddr + MISC_CTRL); |
outb | 622 | drivers/net/3c507.c | outb(0, ioaddr + SIGNAL_CA); |
outb | 625 | drivers/net/3c507.c | outb(0x80, ioaddr + MISC_CTRL); |
outb | 705 | drivers/net/3c507.c | outb(0x20, ioaddr + MISC_CTRL); |
outb | 728 | drivers/net/3c507.c | outb(0xA0, ioaddr + MISC_CTRL); |
outb | 732 | drivers/net/3c507.c | outb(0, ioaddr + SIGNAL_CA); |
outb | 744 | drivers/net/3c507.c | outb(0, ioaddr + SIGNAL_CA); |
outb | 748 | drivers/net/3c507.c | outb(0x84, ioaddr + MISC_CTRL); |
outb | 174 | drivers/net/3c509.c | outb(0x00, ID_PORT); |
outb | 175 | drivers/net/3c509.c | outb(0x00, ID_PORT); |
outb | 177 | drivers/net/3c509.c | outb(lrs_state, ID_PORT); |
outb | 184 | drivers/net/3c509.c | outb(0xd0, ID_PORT); |
outb | 186 | drivers/net/3c509.c | outb(0xd8, ID_PORT); |
outb | 212 | drivers/net/3c509.c | outb(0xd0 + ++current_tag, ID_PORT); |
outb | 215 | drivers/net/3c509.c | outb(0xff, ID_PORT); |
outb | 282 | drivers/net/3c509.c | outb(EEPROM_READ + index, ID_PORT); |
outb | 330 | drivers/net/3c509.c | outb(dev->dev_addr[i], ioaddr + i); |
outb | 455 | drivers/net/3c509.c | outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */ |
outb | 444 | drivers/net/8390.c | outb(ei_local->current_page-1, e8390_base+EN0_BOUNDARY); |
outb | 155 | drivers/net/ac3200.c | outb((inb(ioaddr + AC_CONFIG) & ~7) | i, ioaddr + AC_CONFIG); |
outb | 207 | drivers/net/ac3200.c | outb(AC_RESET, ioaddr + AC_RESET_PORT); |
outb | 211 | drivers/net/ac3200.c | outb(AC_ENABLE, ioaddr + AC_RESET_PORT); |
outb | 256 | drivers/net/ac3200.c | outb(0x00, ioaddr + 6); /* Disable interrupts. */ |
outb | 264 | drivers/net/apricot.c | outb(4, ioaddr+0xf); |
outb | 281 | drivers/net/apricot.c | outb(4, ioaddr+0xf); |
outb | 910 | drivers/net/apricot.c | outb (4, ioaddr+0xf); |
outb | 316 | drivers/net/arcnet.c | #define EnableReceiver() outb(RXcmd|(recbuf<<3)|RXbcasts,COMMAND) |
outb | 716 | drivers/net/arcnet.c | outb(CFLAGScmd|RESETclear|CONFIGclear,COMMAND); |
outb | 736 | drivers/net/arcnet.c | outb(NORXflag,INTMASK); |
outb | 738 | drivers/net/arcnet.c | outb(0,INTMASK); |
outb | 741 | drivers/net/arcnet.c | outb(CFLAGScmd|RESETclear|CONFIGclear,COMMAND); |
outb | 762 | drivers/net/arcnet.c | outb(CFLAGScmd|RESETclear|CONFIGclear,COMMAND); |
outb | 844 | drivers/net/arcnet.c | outb(0,INTMASK); /* no IRQ's, please! */ |
outb | 853 | drivers/net/arcnet.c | outb(CFLAGScmd|RESETclear, COMMAND); /* clear flags & end reset */ |
outb | 854 | drivers/net/arcnet.c | outb(CFLAGScmd|CONFIGclear,COMMAND); |
outb | 873 | drivers/net/arcnet.c | outb(CONFIGcmd|EXTconf,COMMAND); |
outb | 883 | drivers/net/arcnet.c | outb(NORXflag|RECON_flag,INTMASK); |
outb | 988 | drivers/net/arcnet.c | outb(0,INTMASK); /* no IRQ's */ |
outb | 989 | drivers/net/arcnet.c | outb(NOTXcmd,COMMAND); /* disable transmit */ |
outb | 990 | drivers/net/arcnet.c | outb(NORXcmd,COMMAND); /* disable receive */ |
outb | 1070 | drivers/net/arcnet.c | outb(0,INTMASK); |
outb | 1072 | drivers/net/arcnet.c | if (!(status&TXFREEflag)) outb(NOTXcmd,COMMAND); |
outb | 1090 | drivers/net/arcnet.c | outb(NORXflag|RECON_flag,INTMASK); |
outb | 1112 | drivers/net/arcnet.c | outb(0,INTMASK); |
outb | 1113 | drivers/net/arcnet.c | outb(NOTXcmd,COMMAND); /* abort current send */ |
outb | 1397 | drivers/net/arcnet.c | outb(TXcmd|(lp->txready<<3),COMMAND); |
outb | 1399 | drivers/net/arcnet.c | outb(TXFREEflag|NORXflag|RECON_flag,INTMASK); |
outb | 1594 | drivers/net/arcnet.c | outb(0,INTMASK); |
outb | 1611 | drivers/net/arcnet.c | outb(NORXflag|RECON_flag,INTMASK); |
outb | 1622 | drivers/net/arcnet.c | outb(CFLAGScmd|RESETclear,COMMAND); |
outb | 1630 | drivers/net/arcnet.c | outb(CFLAGScmd|CONFIGclear,COMMAND); |
outb | 1758 | drivers/net/arcnet.c | outb(NORXflag|TXFREEflag|RECON_flag,INTMASK); |
outb | 1760 | drivers/net/arcnet.c | outb(NORXflag|RECON_flag,INTMASK); |
outb | 191 | drivers/net/at1700.c | outb(0, ioaddr + RESET); |
outb | 239 | drivers/net/at1700.c | outb(0xe0, ioaddr + 7); |
outb | 241 | drivers/net/at1700.c | outb(dev->dev_addr[i], ioaddr + 8 + i); |
outb | 244 | drivers/net/at1700.c | outb(0xe4, ioaddr + 7); |
outb | 246 | drivers/net/at1700.c | outb(0x00, ioaddr + 8 + i); |
outb | 250 | drivers/net/at1700.c | outb(0xda, ioaddr + CONFIG_0); |
outb | 253 | drivers/net/at1700.c | outb(0xe8, ioaddr + 7); |
outb | 254 | drivers/net/at1700.c | outb(dev->if_port, MODE13); |
outb | 257 | drivers/net/at1700.c | outb(0x00, ioaddr + CONFIG_1); |
outb | 288 | drivers/net/at1700.c | outb(ctrl_val, ee_addr); |
outb | 293 | drivers/net/at1700.c | outb(dataval, ee_daddr); |
outb | 294 | drivers/net/at1700.c | outb(EE_CS | EE_SHIFT_CLK, ee_addr); /* EEPROM clock tick. */ |
outb | 296 | drivers/net/at1700.c | outb(EE_CS, ee_addr); /* Finish EEPROM a clock tick. */ |
outb | 299 | drivers/net/at1700.c | outb(EE_CS, ee_addr); |
outb | 302 | drivers/net/at1700.c | outb(EE_CS | EE_SHIFT_CLK, ee_addr); |
outb | 305 | drivers/net/at1700.c | outb(EE_CS, ee_addr); |
outb | 311 | drivers/net/at1700.c | outb(ctrl_val | EE_SHIFT_CLK, ee_addr); |
outb | 313 | drivers/net/at1700.c | outb(ctrl_val, ee_addr); |
outb | 327 | drivers/net/at1700.c | outb(0xe0, ioaddr + CONFIG_1); |
outb | 331 | drivers/net/at1700.c | outb(dev->dev_addr[i], ioaddr + 8 + i); |
outb | 334 | drivers/net/at1700.c | outb(0xe4, ioaddr + 7); |
outb | 336 | drivers/net/at1700.c | outb(0x00, ioaddr + 8 + i); |
outb | 340 | drivers/net/at1700.c | outb(0xda, ioaddr + CONFIG_0); |
outb | 343 | drivers/net/at1700.c | outb(0x5a, ioaddr + CONFIG_0); |
outb | 345 | drivers/net/at1700.c | outb(0xe8, ioaddr + CONFIG_1); |
outb | 352 | drivers/net/at1700.c | outb(0x00, ioaddr + TX_INTR); |
outb | 353 | drivers/net/at1700.c | outb(0x81, ioaddr + RX_INTR); |
outb | 411 | drivers/net/at1700.c | outb(0x00, ioaddr + TX_INTR); |
outb | 421 | drivers/net/at1700.c | outb(0x80 | lp->tx_queue, ioaddr + TX_START); |
outb | 432 | drivers/net/at1700.c | outb(0x82, ioaddr + TX_INTR); |
outb | 469 | drivers/net/at1700.c | outb(0x80 | lp->tx_queue, ioaddr + TX_START); |
outb | 478 | drivers/net/at1700.c | outb(0x00, ioaddr + TX_INTR); |
outb | 506 | drivers/net/at1700.c | outb(0x05, ioaddr + 14); |
outb | 526 | drivers/net/at1700.c | outb(0x05, ioaddr + 14); |
outb | 536 | drivers/net/at1700.c | outb(0x05, ioaddr + 14); |
outb | 561 | drivers/net/at1700.c | outb(0x05, ioaddr + 14); |
outb | 581 | drivers/net/at1700.c | outb(0xda, ioaddr + CONFIG_0); |
outb | 586 | drivers/net/at1700.c | outb(0x00, ioaddr + CONFIG_1); |
outb | 616 | drivers/net/at1700.c | outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */ |
outb | 618 | drivers/net/at1700.c | outb(2, ioaddr + RX_MODE); /* Disable promiscuous, use normal mode */ |
outb | 165 | drivers/net/atp.c | outb(0x57, ioaddr + PAR_DATA); |
outb | 179 | drivers/net/atp.c | outb(0xff, ioaddr + PAR_DATA); |
outb | 184 | drivers/net/atp.c | outb(0x04, ioaddr + PAR_CONTROL); |
outb | 191 | drivers/net/atp.c | outb(saved_ctrl_reg, ioaddr + PAR_CONTROL); |
outb | 196 | drivers/net/atp.c | outb(saved_ctrl_reg, ioaddr + PAR_CONTROL); |
outb | 362 | drivers/net/atp.c | outb(Ctrl_SelData + Ctrl_IRQEN, ioaddr + PAR_CONTROL); |
outb | 386 | drivers/net/atp.c | outb(EOC+MAR, ioaddr + PAR_DATA); |
outb | 389 | drivers/net/atp.c | outb(WrAddr+MAR, ioaddr + PAR_DATA); |
outb | 397 | drivers/net/atp.c | outb(Ctrl_LNibWrite + Ctrl_IRQEN, ioaddr + PAR_CONTROL); |
outb | 398 | drivers/net/atp.c | outb(WrAddr+MAR, ioaddr + PAR_DATA); |
outb | 400 | drivers/net/atp.c | outb((outbyte & 0x0f)|0x40, ioaddr + PAR_DATA); |
outb | 401 | drivers/net/atp.c | outb(outbyte & 0x0f, ioaddr + PAR_DATA); |
outb | 403 | drivers/net/atp.c | outb(outbyte & 0x0f, ioaddr + PAR_DATA); |
outb | 404 | drivers/net/atp.c | outb(Ctrl_HNibWrite + Ctrl_IRQEN, ioaddr + PAR_CONTROL); |
outb | 409 | drivers/net/atp.c | outb(0xff, ioaddr + PAR_DATA); |
outb | 410 | drivers/net/atp.c | outb(Ctrl_HNibWrite | Ctrl_SelData | Ctrl_IRQEN, ioaddr + PAR_CONTROL); |
outb | 502 | drivers/net/atp.c | outb(Ctrl_SelData, ioaddr + PAR_CONTROL); |
outb | 596 | drivers/net/atp.c | outb(Ctrl_SelData + Ctrl_IRQEN, ioaddr + PAR_CONTROL); |
outb | 655 | drivers/net/atp.c | outb(EOC+MAR, ioaddr + PAR_DATA); |
outb | 705 | drivers/net/atp.c | outb(Ctrl_LNibRead, ioaddr + PAR_CONTROL); |
outb | 706 | drivers/net/atp.c | outb(length == 8 ? RdAddr | HNib | MAR : RdAddr | MAR, |
outb | 717 | drivers/net/atp.c | outb(EOC+HNib+MAR, ioaddr + PAR_DATA); |
outb | 718 | drivers/net/atp.c | outb(Ctrl_SelData, ioaddr + PAR_CONTROL); |
outb | 736 | drivers/net/atp.c | outb(0x00, ioaddr + PAR_CONTROL); |
outb | 96 | drivers/net/atp.h | outb(EOC+offset, port + PAR_DATA); |
outb | 97 | drivers/net/atp.h | outb(RdAddr+offset, port + PAR_DATA); |
outb | 100 | drivers/net/atp.h | outb(EOC+offset, port + PAR_DATA); |
outb | 111 | drivers/net/atp.h | outb(Ctrl_LNibRead, ioaddr + PAR_CONTROL); |
outb | 114 | drivers/net/atp.h | outb(Ctrl_HNibRead, ioaddr + PAR_CONTROL); |
outb | 125 | drivers/net/atp.h | outb(Ctrl_LNibRead, ioaddr + PAR_CONTROL); |
outb | 128 | drivers/net/atp.h | outb(Ctrl_HNibRead, ioaddr + PAR_CONTROL); |
outb | 138 | drivers/net/atp.h | outb(RdAddr | MAR, ioaddr + PAR_DATA); |
outb | 140 | drivers/net/atp.h | outb(RdAddr | HNib | MAR, ioaddr + PAR_DATA); |
outb | 149 | drivers/net/atp.h | outb(RdAddr | MAR, ioaddr + PAR_DATA); |
outb | 152 | drivers/net/atp.h | outb(RdAddr | HNib | MAR, ioaddr + PAR_DATA); |
outb | 161 | drivers/net/atp.h | outb(EOC | reg, port + PAR_DATA); |
outb | 163 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 164 | drivers/net/atp.h | outb(outval, port + PAR_DATA); /* Double write for PS/2. */ |
outb | 168 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 170 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 171 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 173 | drivers/net/atp.h | outb(EOC | outval, port + PAR_DATA); |
outb | 181 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 183 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 184 | drivers/net/atp.h | outb(outval, port + PAR_DATA); /* Double write for PS/2. */ |
outb | 187 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 189 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 190 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 192 | drivers/net/atp.h | outb(EOC | HNib | outval, port + PAR_DATA); |
outb | 200 | drivers/net/atp.h | outb(EOC | reg, port + PAR_DATA); /* Reset the address register. */ |
outb | 202 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 203 | drivers/net/atp.h | outb(outval, port + PAR_DATA); /* Double write for PS/2. */ |
outb | 205 | drivers/net/atp.h | outb((outval & 0xf0) | (value & 0x0f), port + PAR_DATA); |
outb | 206 | drivers/net/atp.h | outb(value & 0x0f, port + PAR_DATA); |
outb | 208 | drivers/net/atp.h | outb(value, port + PAR_DATA); |
outb | 209 | drivers/net/atp.h | outb(0x10 | value, port + PAR_DATA); |
outb | 210 | drivers/net/atp.h | outb(0x10 | value, port + PAR_DATA); |
outb | 212 | drivers/net/atp.h | outb(EOC | value, port + PAR_DATA); /* Reset the address register. */ |
outb | 224 | drivers/net/atp.h | outb(value & 0x0f, ioaddr + PAR_DATA); |
outb | 225 | drivers/net/atp.h | outb((value>>4) | 0x10, ioaddr + PAR_DATA); |
outb | 230 | drivers/net/atp.h | outb(value & 0x0f, ioaddr + PAR_DATA); |
outb | 231 | drivers/net/atp.h | outb(Ctrl_IRQEN | Ctrl_LNibWrite, ioaddr + PAR_CONTROL); |
outb | 232 | drivers/net/atp.h | outb((value>>4) | 0x10, ioaddr + PAR_DATA); |
outb | 233 | drivers/net/atp.h | outb(Ctrl_IRQEN | Ctrl_HNibWrite, ioaddr + PAR_CONTROL); |
outb | 239 | drivers/net/atp.h | outb(value & 0x0f, ioaddr + PAR_DATA); |
outb | 241 | drivers/net/atp.h | outb((value & 0x0f) | 0x10, ioaddr + PAR_DATA); |
outb | 243 | drivers/net/atp.h | outb(value & 0x0f, ioaddr + PAR_DATA); |
outb | 245 | drivers/net/atp.h | outb((value & 0x0f) | 0x10, ioaddr + PAR_DATA); |
outb | 2552 | drivers/net/de4x5.c | outb(omr, DE4X5_OMR); |
outb | 225 | drivers/net/de620.c | #define de620_flip_ds() NIC_Cmd ^= DS0 | DS1; outb(NIC_Cmd, COMMAND_PORT); |
outb | 251 | drivers/net/de620.c | outb(NIC_Cmd, COMMAND_PORT); |
outb | 253 | drivers/net/de620.c | outb(cmd, DATA_PORT); |
outb | 255 | drivers/net/de620.c | outb(NIC_Cmd ^ CS0, COMMAND_PORT); |
outb | 257 | drivers/net/de620.c | outb(NIC_Cmd, COMMAND_PORT); |
outb | 265 | drivers/net/de620.c | outb(value, DATA_PORT); |
outb | 308 | drivers/net/de620.c | outb(*buffer++, DATA_PORT); |
outb | 309 | drivers/net/de620.c | outb(uflip, COMMAND_PORT); |
outb | 310 | drivers/net/de620.c | outb(*buffer++, DATA_PORT); |
outb | 311 | drivers/net/de620.c | outb(dflip, COMMAND_PORT); |
outb | 345 | drivers/net/de620.c | outb(uflip, COMMAND_PORT); |
outb | 347 | drivers/net/de620.c | outb(dflip , COMMAND_PORT); |
outb | 356 | drivers/net/de620.c | outb(W_DFR, DATA_PORT); |
outb | 357 | drivers/net/de620.c | outb(NIC_Cmd ^ CS0, COMMAND_PORT); |
outb | 361 | drivers/net/de620.c | outb(WRITE_DELAY, DATA_PORT); |
outb | 363 | drivers/net/de620.c | outb(0, DATA_PORT); |
outb | 369 | drivers/net/de620.c | outb(READ_DELAY, DATA_PORT); |
outb | 371 | drivers/net/de620.c | outb(0, DATA_PORT); |
outb | 380 | drivers/net/de620.c | outb(reg, DATA_PORT); |
outb | 381 | drivers/net/de620.c | outb(NIC_Cmd ^ CS0, COMMAND_PORT); |
outb | 461 | drivers/net/depca.c | outb(nicsr, DEPCA_NICSR); |
outb | 509 | drivers/net/depca.c | outb(nicsr, DEPCA_NICSR); |
outb | 559 | drivers/net/depca.c | outb(nicsr, DEPCA_NICSR); |
outb | 673 | drivers/net/depca.c | outb(nicsr, DEPCA_NICSR); |
outb | 747 | drivers/net/depca.c | outb(nicsr, DEPCA_NICSR); |
outb | 892 | drivers/net/depca.c | outb(nicsr, DEPCA_NICSR); |
outb | 913 | drivers/net/depca.c | outb(nicsr, DEPCA_NICSR); |
outb | 1085 | drivers/net/depca.c | outb(nicsr, DEPCA_NICSR); |
outb | 1502 | drivers/net/depca.c | outb(nicsr, DEPCA_NICSR); |
outb | 74 | drivers/net/e2100.c | outb(E21_MEM_ON, port + E21_MEM_ENABLE + E21_MEM_ON); |
outb | 80 | drivers/net/e2100.c | outb(0x00, port + E21_MEM_ENABLE); |
outb | 143 | drivers/net/e2100.c | outb(E8390_NODMA + E8390_STOP, ioaddr); |
outb | 157 | drivers/net/e2100.c | outb(0, ioaddr + E21_ASIC); /* and disable the secondary interface. */ |
outb | 244 | drivers/net/e2100.c | outb(0, ioaddr + E21_ASIC + (dev->irq & 7)); |
outb | 246 | drivers/net/e2100.c | outb(0, ioaddr + E21_ASIC + (dev->irq > 7 ? 1:0) |
outb | 249 | drivers/net/e2100.c | outb(0, ioaddr + E21_ASIC + ((dev->mem_start >> 17) & 7)); |
outb | 259 | drivers/net/e2100.c | outb(0x01, ioaddr); |
outb | 322 | drivers/net/e2100.c | outb(0, ioaddr + E21_ASIC); |
outb | 324 | drivers/net/e2100.c | outb(0, ioaddr + E21_ASIC); |
outb | 362 | drivers/net/eepro.c | outb(BANK2_SELECT, ioaddr); /* be CAREFULL, BANK 2 now */ |
outb | 426 | drivers/net/eepro.c | outb(RESET_CMD, ioaddr); /* RESET the 82595 */ |
outb | 451 | drivers/net/eepro.c | outb(BANK1_SELECT, ioaddr); /* be CAREFULL, BANK 1 now */ |
outb | 455 | drivers/net/eepro.c | outb(temp_reg | INT_ENABLE, ioaddr + REG1); |
outb | 457 | drivers/net/eepro.c | outb(BANK0_SELECT, ioaddr); /* be CAREFULL, BANK 0 now */ |
outb | 460 | drivers/net/eepro.c | outb(ALL_MASK, ioaddr + STATUS_REG); |
outb | 462 | drivers/net/eepro.c | outb(ALL_MASK & ~(EXEC_MASK), ioaddr + INT_MASK_REG); |
outb | 465 | drivers/net/eepro.c | outb(BANK1_SELECT, ioaddr); /* be CAREFULL, BANK 1 now */ |
outb | 468 | drivers/net/eepro.c | outb((temp_reg & 0xf8) | irqrmap[*irqp], ioaddr + INT_NO_REG); |
outb | 470 | drivers/net/eepro.c | outb(BANK0_SELECT, ioaddr); /* Switch back to Bank 0 */ |
outb | 476 | drivers/net/eepro.c | outb(DIAGNOSE_CMD, ioaddr); /* RESET the 82595 */ |
outb | 483 | drivers/net/eepro.c | outb(ALL_MASK, ioaddr + STATUS_REG); |
outb | 487 | drivers/net/eepro.c | outb(BANK1_SELECT, ioaddr); /* Switch back to Bank 1 */ |
outb | 491 | drivers/net/eepro.c | outb(temp_reg & 0x7f, ioaddr + REG1); |
outb | 493 | drivers/net/eepro.c | outb(BANK0_SELECT, ioaddr); /* Switch back to Bank 0 */ |
outb | 496 | drivers/net/eepro.c | outb(ALL_MASK, ioaddr + INT_MASK_REG); |
outb | 499 | drivers/net/eepro.c | outb(ALL_MASK, ioaddr + STATUS_REG); |
outb | 532 | drivers/net/eepro.c | outb(BANK2_SELECT, ioaddr); /* be CAREFULL, BANK 2 now */ |
outb | 535 | drivers/net/eepro.c | outb(temp_reg & 0xef, ioaddr + EEPROM_REG); |
outb | 537 | drivers/net/eepro.c | outb(dev->dev_addr[i] , ioaddr + I_ADD_REG0 + i); |
outb | 540 | drivers/net/eepro.c | outb(temp_reg | XMT_Chain_Int | XMT_Chain_ErrStop /* and discard bad RCV frames */ |
outb | 544 | drivers/net/eepro.c | outb(temp_reg | 0x14, ioaddr + REG2); |
outb | 547 | drivers/net/eepro.c | outb(temp_reg & 0x3f, ioaddr + REG3); /* clear test mode */ |
outb | 550 | drivers/net/eepro.c | outb(BANK1_SELECT, ioaddr); /* be CAREFULL, BANK 1 now */ |
outb | 553 | drivers/net/eepro.c | outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG); |
outb | 556 | drivers/net/eepro.c | outb(RCV_LOWER_LIMIT, ioaddr + RCV_LOWER_LIMIT_REG); |
outb | 557 | drivers/net/eepro.c | outb(RCV_UPPER_LIMIT, ioaddr + RCV_UPPER_LIMIT_REG); |
outb | 558 | drivers/net/eepro.c | outb(XMT_LOWER_LIMIT, ioaddr + XMT_LOWER_LIMIT_REG); |
outb | 559 | drivers/net/eepro.c | outb(XMT_UPPER_LIMIT, ioaddr + XMT_UPPER_LIMIT_REG); |
outb | 563 | drivers/net/eepro.c | outb(temp_reg | INT_ENABLE, ioaddr + REG1); |
outb | 565 | drivers/net/eepro.c | outb(BANK0_SELECT, ioaddr); /* Switch back to Bank 0 */ |
outb | 568 | drivers/net/eepro.c | outb(ALL_MASK & ~(RX_MASK | TX_MASK), ioaddr + INT_MASK_REG); |
outb | 570 | drivers/net/eepro.c | outb(ALL_MASK, ioaddr + STATUS_REG); |
outb | 580 | drivers/net/eepro.c | outb(SEL_RESET_CMD, ioaddr); |
outb | 595 | drivers/net/eepro.c | outb(RCV_ENABLE_CMD, ioaddr); |
outb | 623 | drivers/net/eepro.c | outb(SEL_RESET_CMD, ioaddr); |
outb | 635 | drivers/net/eepro.c | outb(RCV_ENABLE_CMD, ioaddr); |
outb | 697 | drivers/net/eepro.c | outb(RX_INT, ioaddr + STATUS_REG); |
outb | 707 | drivers/net/eepro.c | outb(TX_INT, ioaddr + STATUS_REG); |
outb | 733 | drivers/net/eepro.c | outb(BANK1_SELECT, ioaddr); /* Switch back to Bank 1 */ |
outb | 737 | drivers/net/eepro.c | outb(temp_reg & 0x7f, ioaddr + REG1); |
outb | 739 | drivers/net/eepro.c | outb(BANK0_SELECT, ioaddr); /* Switch back to Bank 0 */ |
outb | 742 | drivers/net/eepro.c | outb(STOP_RCV_CMD, ioaddr); |
outb | 747 | drivers/net/eepro.c | outb(ALL_MASK, ioaddr + INT_MASK_REG); |
outb | 750 | drivers/net/eepro.c | outb(ALL_MASK, ioaddr + STATUS_REG); |
outb | 753 | drivers/net/eepro.c | outb(RESET_CMD, ioaddr); |
outb | 799 | drivers/net/eepro.c | outb(BANK2_SELECT, ioaddr); /* be CAREFULL, BANK 2 now */ |
outb | 801 | drivers/net/eepro.c | outb(mode | PRMSC_Mode, ioaddr + REG2); |
outb | 803 | drivers/net/eepro.c | outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */ |
outb | 804 | drivers/net/eepro.c | outb(BANK0_SELECT, ioaddr); /* Return to BANK 0 now */ |
outb | 808 | drivers/net/eepro.c | outb(BANK2_SELECT, ioaddr); /* be CAREFULL, BANK 2 now */ |
outb | 810 | drivers/net/eepro.c | outb(mode & 0xd6, ioaddr + REG2); /* Turn off Multi-IA and PRMSC_Mode bits */ |
outb | 812 | drivers/net/eepro.c | outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */ |
outb | 813 | drivers/net/eepro.c | outb(BANK0_SELECT, ioaddr); /* Return to BANK 0 now */ |
outb | 822 | drivers/net/eepro.c | outb(ALL_MASK, ioaddr + INT_MASK_REG); |
outb | 824 | drivers/net/eepro.c | outb(BANK2_SELECT, ioaddr); /* be CAREFULL, BANK 2 now */ |
outb | 826 | drivers/net/eepro.c | outb(mode | Multi_IA, ioaddr + REG2); |
outb | 828 | drivers/net/eepro.c | outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */ |
outb | 829 | drivers/net/eepro.c | outb(BANK0_SELECT, ioaddr); /* Return to BANK 0 now */ |
outb | 845 | drivers/net/eepro.c | outb(MC_SETUP, ioaddr); |
outb | 866 | drivers/net/eepro.c | outb(0x08, ioaddr + STATUS_REG); |
outb | 880 | drivers/net/eepro.c | outb(ALL_MASK & ~(RX_MASK | TX_MASK), ioaddr + INT_MASK_REG); |
outb | 883 | drivers/net/eepro.c | outb(RCV_ENABLE_CMD, ioaddr); |
outb | 902 | drivers/net/eepro.c | outb(BANK2_SELECT, ioaddr); |
outb | 903 | drivers/net/eepro.c | outb(ctrl_val, ee_addr); |
outb | 909 | drivers/net/eepro.c | outb(outval, ee_addr); |
outb | 910 | drivers/net/eepro.c | outb(outval | EESK, ee_addr); /* EEPROM clock tick. */ |
outb | 912 | drivers/net/eepro.c | outb(outval, ee_addr); /* Finish EEPROM a clock tick. */ |
outb | 915 | drivers/net/eepro.c | outb(ctrl_val, ee_addr); |
outb | 918 | drivers/net/eepro.c | outb(ctrl_val | EESK, ee_addr); eeprom_delay(); |
outb | 920 | drivers/net/eepro.c | outb(ctrl_val, ee_addr); eeprom_delay(); |
outb | 925 | drivers/net/eepro.c | outb(ctrl_val | EESK, ee_addr); |
outb | 927 | drivers/net/eepro.c | outb(ctrl_val, ee_addr); |
outb | 929 | drivers/net/eepro.c | outb(BANK0_SELECT, ioaddr); |
outb | 955 | drivers/net/eepro.c | outb(ALL_MASK, ioaddr + INT_MASK_REG); |
outb | 997 | drivers/net/eepro.c | outb(ALL_MASK & ~(RX_MASK | TX_MASK), ioaddr + INT_MASK_REG); |
outb | 1001 | drivers/net/eepro.c | outb(XMT_CMD, ioaddr); |
outb | 1004 | drivers/net/eepro.c | else outb(RESUME_XMT_CMD, ioaddr); |
outb | 388 | drivers/net/eexpress.c | outb(0x00, ioaddr + SET_IRQ); |
outb | 392 | drivers/net/eexpress.c | outb(ASIC_RESET, ioaddr + EEPROM_Ctrl); |
outb | 440 | drivers/net/eexpress.c | outb(irqrmap[dev->irq] | 0x08, ioaddr + SET_IRQ); |
outb | 477 | drivers/net/eexpress.c | outb(0, ioaddr + SIGNAL_CA); |
outb | 500 | drivers/net/eexpress.c | outb(irqrmap[dev->irq], ioaddr + SET_IRQ); |
outb | 504 | drivers/net/eexpress.c | outb(0x08 | irqrmap[dev->irq], ioaddr + SET_IRQ); |
outb | 541 | drivers/net/eexpress.c | outb(irqrmap[dev->irq], ioaddr + SET_IRQ); |
outb | 627 | drivers/net/eexpress.c | outb(0, ioaddr + SIGNAL_CA); |
outb | 634 | drivers/net/eexpress.c | outb(irqrmap[dev->irq] | 0x08, ioaddr + SET_IRQ); |
outb | 648 | drivers/net/eexpress.c | outb(0, ioaddr + SIGNAL_CA); |
outb | 651 | drivers/net/eexpress.c | outb(0, ioaddr + SET_IRQ); |
outb | 725 | drivers/net/eexpress.c | outb(ctrl_val, ee_addr); |
outb | 731 | drivers/net/eexpress.c | outb(outval, ee_addr); |
outb | 732 | drivers/net/eexpress.c | outb(outval | EE_SHIFT_CLK, ee_addr); /* EEPROM clock tick. */ |
outb | 734 | drivers/net/eexpress.c | outb(outval, ee_addr); /* Finish EEPROM a clock tick. */ |
outb | 737 | drivers/net/eexpress.c | outb(ctrl_val, ee_addr); |
outb | 740 | drivers/net/eexpress.c | outb(ctrl_val | EE_SHIFT_CLK, ee_addr); eeprom_delay(); |
outb | 742 | drivers/net/eexpress.c | outb(ctrl_val, ee_addr); eeprom_delay(); |
outb | 747 | drivers/net/eexpress.c | outb(ctrl_val | EE_SHIFT_CLK, ee_addr); |
outb | 749 | drivers/net/eexpress.c | outb(ctrl_val, ee_addr); |
outb | 762 | drivers/net/eexpress.c | outb(inb(ioaddr + Config) | 0x02, ioaddr + Config); |
outb | 765 | drivers/net/eexpress.c | outb(_586_RESET, ioaddr + EEPROM_Ctrl); |
outb | 786 | drivers/net/eexpress.c | outb(0x00, ioaddr + EEPROM_Ctrl); |
outb | 790 | drivers/net/eexpress.c | outb(0, ioaddr + SIGNAL_CA); |
outb | 801 | drivers/net/eexpress.c | outb(0, ioaddr + SIGNAL_CA); |
outb | 805 | drivers/net/eexpress.c | outb(inb(ioaddr + Config) & ~0x02, ioaddr + Config); |
outb | 235 | drivers/net/ewrk3.c | outb(icr, EWRK3_ICR) /* Enable the IRQs */ |
outb | 240 | drivers/net/ewrk3.c | outb(icr, EWRK3_ICR) /* Disable the IRQs */ |
outb | 248 | drivers/net/ewrk3.c | outb(csr, EWRK3_CSR) /* Enable the TX and/or RX */ |
outb | 252 | drivers/net/ewrk3.c | outb(csr, EWRK3_CSR) /* Disable the TX and/or RX */ |
outb | 286 | drivers/net/ewrk3.c | outb(((mem_start - 0x80000) >> 11), EWRK3_MBR) |
outb | 336 | drivers/net/ewrk3.c | outb(EEPROM_INIT, EWRK3_IOPR);\ |
outb | 451 | drivers/net/ewrk3.c | outb(eisa_cr, EISA_CR); /* Rewrite the EISA CR */ |
outb | 475 | drivers/net/ewrk3.c | outb(eeprom_image[EEPROM_PADDR0 + i], EWRK3_PAR0 + i); |
outb | 478 | drivers/net/ewrk3.c | outb(eeprom_image[EEPROM_PADDR0 + i], EWRK3_PAR0 + i); |
outb | 483 | drivers/net/ewrk3.c | outb(dev->dev_addr[i], EWRK3_PAR0 + i); |
outb | 486 | drivers/net/ewrk3.c | outb(dev->dev_addr[i], EWRK3_PAR0 + i); |
outb | 502 | drivers/net/ewrk3.c | outb(cmr, EWRK3_CMR); |
outb | 509 | drivers/net/ewrk3.c | outb(cr, EWRK3_CR); |
outb | 566 | drivers/net/ewrk3.c | outb(icr, EWRK3_ICR); |
outb | 583 | drivers/net/ewrk3.c | outb(1,EWRK3_TDQ); /* Write to the TX done queue */ |
outb | 584 | drivers/net/ewrk3.c | outb(icr, EWRK3_ICR); /* Unmask the TXD interrupt */ |
outb | 748 | drivers/net/ewrk3.c | outb(page, EWRK3_FMQ); /* to the Free Memory Queue */ |
outb | 824 | drivers/net/ewrk3.c | outb(page, EWRK3_IOPR); |
outb | 827 | drivers/net/ewrk3.c | outb(page, EWRK3_MPR); |
outb | 830 | drivers/net/ewrk3.c | outb((page >> 4), EWRK3_MPR); |
outb | 833 | drivers/net/ewrk3.c | outb((page >> 5), EWRK3_MPR); |
outb | 850 | drivers/net/ewrk3.c | outb((char)(QMODE | PAD | IFC), EWRK3_DATA); |
outb | 851 | drivers/net/ewrk3.c | outb((char)(skb->len & 0xff), EWRK3_DATA); |
outb | 852 | drivers/net/ewrk3.c | outb((char)((skb->len >> 8) & 0xff), EWRK3_DATA); |
outb | 853 | drivers/net/ewrk3.c | outb((char)0x04, EWRK3_DATA); |
outb | 855 | drivers/net/ewrk3.c | outb(*p++, EWRK3_DATA); |
outb | 857 | drivers/net/ewrk3.c | outb(page, EWRK3_TQ); /* Start sending pkt */ |
outb | 866 | drivers/net/ewrk3.c | outb(page, EWRK3_TQ); /* Start sending pkt */ |
outb | 873 | drivers/net/ewrk3.c | outb(page, EWRK3_TQ); /* Start sending pkt */ |
outb | 882 | drivers/net/ewrk3.c | outb(page, EWRK3_FMQ); |
outb | 937 | drivers/net/ewrk3.c | outb(cr, EWRK3_CR); |
outb | 954 | drivers/net/ewrk3.c | outb(csr, EWRK3_CSR); |
outb | 963 | drivers/net/ewrk3.c | outb(cr, EWRK3_CR); |
outb | 1001 | drivers/net/ewrk3.c | outb(page, EWRK3_IOPR); |
outb | 1004 | drivers/net/ewrk3.c | outb(page, EWRK3_MPR); |
outb | 1007 | drivers/net/ewrk3.c | outb((page >> 4), EWRK3_MPR); |
outb | 1010 | drivers/net/ewrk3.c | outb((page >> 5), EWRK3_MPR); |
outb | 1097 | drivers/net/ewrk3.c | outb(page, EWRK3_FMQ); |
outb | 1101 | drivers/net/ewrk3.c | outb(tmpPage, EWRK3_IOPR); |
outb | 1103 | drivers/net/ewrk3.c | outb(tmpPage, EWRK3_MPR); |
outb | 1235 | drivers/net/ewrk3.c | outb(csr, EWRK3_CSR); |
outb | 1239 | drivers/net/ewrk3.c | outb(csr, EWRK3_CSR); |
outb | 1263 | drivers/net/ewrk3.c | outb(0, EWRK3_IOPR); |
outb | 1266 | drivers/net/ewrk3.c | outb(0, EWRK3_MPR); |
outb | 1272 | drivers/net/ewrk3.c | outb(0xff, EWRK3_DATA); |
outb | 1282 | drivers/net/ewrk3.c | outb(0x00, EWRK3_DATA); |
outb | 1284 | drivers/net/ewrk3.c | outb(0x80, EWRK3_DATA); i++; /* insert the broadcast bit */ |
outb | 1286 | drivers/net/ewrk3.c | outb(0x00, EWRK3_DATA); |
outb | 1315 | drivers/net/ewrk3.c | outb(tmp, EWRK3_DATA); |
outb | 1463 | drivers/net/ewrk3.c | outb((eaddr & 0x3f), EWRK3_PIR1); /* set up 6 bits of address info */ |
outb | 1464 | drivers/net/ewrk3.c | outb(EEPROM_RD, EWRK3_IOPR); /* issue read command */ |
outb | 1477 | drivers/net/ewrk3.c | outb(EEPROM_WR_EN, EWRK3_IOPR); /* issue write enable command */ |
outb | 1480 | drivers/net/ewrk3.c | outb((eaddr & 0x3f), EWRK3_PIR1); /* set up 6 bits of address info */ |
outb | 1481 | drivers/net/ewrk3.c | outb(EEPROM_WR, EWRK3_IOPR); /* issue write command */ |
outb | 1483 | drivers/net/ewrk3.c | outb(EEPROM_WR_DIS, EWRK3_IOPR); /* issue write disable command */ |
outb | 1639 | drivers/net/ewrk3.c | outb(csr, EWRK3_CSR); /* Disable the TX and RX */ |
outb | 1646 | drivers/net/ewrk3.c | outb(tmp.addr[i], EWRK3_PAR0 + i); |
outb | 1650 | drivers/net/ewrk3.c | outb(csr, EWRK3_CSR); |
outb | 1661 | drivers/net/ewrk3.c | outb(csr, EWRK3_CSR); |
outb | 1671 | drivers/net/ewrk3.c | outb(csr, EWRK3_CSR); |
outb | 1687 | drivers/net/ewrk3.c | outb(0, EWRK3_IOPR); |
outb | 1693 | drivers/net/ewrk3.c | outb(0, EWRK3_MPR); |
outb | 1728 | drivers/net/ewrk3.c | outb(csr, EWRK3_CSR); |
outb | 1768 | drivers/net/ewrk3.c | outb(tmp.addr[0], EWRK3_CSR); |
outb | 347 | drivers/net/hp100.h | outb( data, ioaddr + HP100_REG_##reg ) |
outb | 353 | drivers/net/hp100.h | outb( inb( ioaddr + HP100_REG_##reg ) | (data), ioaddr + HP100_REG_##reg ) |
outb | 357 | drivers/net/hp100.h | outb( inb( ioaddr + HP100_REG_##reg ) & (data), ioaddr + HP100_REG_##reg ) |
outb | 536 | drivers/net/ibmtr.c | outb(0,ti->global_int_enable); |
outb | 804 | drivers/net/ibmtr.c | outb(0,ti->global_int_enable); |
outb | 869 | drivers/net/ibmtr.c | outb(0,PIOaddr+ADAPTRESET); |
outb | 871 | drivers/net/ibmtr.c | outb(0,PIOaddr+ADAPTRESETREL); |
outb | 179 | drivers/net/ne.c | outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET); |
outb | 352 | drivers/net/ne.c | outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); |
outb | 100 | drivers/net/ni52.c | #define ni_attn586() {outb(0,dev->base_addr+NI52_ATTENTION);} |
outb | 101 | drivers/net/ni52.c | #define ni_reset586() {outb(0,dev->base_addr+NI52_RESET);} |
outb | 214 | drivers/net/plip.c | outb(0, PAR_DATA(dev)); |
outb | 231 | drivers/net/plip.c | outb(0x00, PAR_CONTROL(dev)); |
outb | 233 | drivers/net/plip.c | outb(PAR_INTR_OFF, PAR_CONTROL(dev)); |
outb | 234 | drivers/net/plip.c | outb(PAR_INTR_ON, PAR_CONTROL(dev)); |
outb | 235 | drivers/net/plip.c | outb(PAR_INTR_OFF, PAR_CONTROL(dev)); |
outb | 409 | drivers/net/plip.c | outb(PAR_INTR_OFF, PAR_CONTROL(dev)); |
outb | 412 | drivers/net/plip.c | outb(0x00, PAR_DATA(dev)); |
outb | 449 | drivers/net/plip.c | outb(0x10, --status_addr); /* send ACK */ |
outb | 467 | drivers/net/plip.c | outb(0x00, --status_addr); /* send ACK */ |
outb | 488 | drivers/net/plip.c | outb(PAR_INTR_OFF, PAR_CONTROL(dev)); |
outb | 490 | drivers/net/plip.c | outb(0x01, PAR_DATA(dev)); /* send ACK */ |
outb | 505 | drivers/net/plip.c | outb(PAR_INTR_ON, PAR_CONTROL(dev)); |
outb | 570 | drivers/net/plip.c | outb (0x00, PAR_DATA(dev)); |
outb | 576 | drivers/net/plip.c | outb(PAR_INTR_ON, PAR_CONTROL(dev)); |
outb | 582 | drivers/net/plip.c | outb(PAR_INTR_ON, PAR_CONTROL(dev)); |
outb | 601 | drivers/net/plip.c | outb((data & 0x0f), data_addr); |
outb | 605 | drivers/net/plip.c | outb(0x10 | (data & 0x0f), data_addr); |
outb | 616 | drivers/net/plip.c | outb(0x10 | (data >> 4), --data_addr); |
outb | 620 | drivers/net/plip.c | outb((data >> 4), data_addr); |
outb | 658 | drivers/net/plip.c | outb(0x08, data_addr); |
outb | 674 | drivers/net/plip.c | outb(PAR_INTR_OFF, PAR_CONTROL(dev)); |
outb | 685 | drivers/net/plip.c | outb(0x00, data_addr); |
outb | 726 | drivers/net/plip.c | outb (0x00, data_addr); |
outb | 733 | drivers/net/plip.c | outb(PAR_INTR_ON, PAR_CONTROL(dev)); |
outb | 768 | drivers/net/plip.c | outb(PAR_INTR_ON, PAR_CONTROL(dev)); |
outb | 930 | drivers/net/plip.c | outb (0x00, PAR_DATA(dev)); |
outb | 933 | drivers/net/plip.c | outb(PAR_INTR_ON, PAR_CONTROL(dev)); |
outb | 969 | drivers/net/plip.c | outb(0x00, PAR_DATA(dev)); |
outb | 984 | drivers/net/plip.c | outb(0x00, PAR_CONTROL(dev)); |
outb | 653 | drivers/net/seeq8005.c | outb(dev->dev_addr[i], SEEQ_BUFFER); |
outb | 658 | drivers/net/seeq8005.c | outb( DEFAULT_TEA, SEEQ_BUFFER); /* this gives us 16K of send buffer and 48K of recv buffer */ |
outb | 674 | drivers/net/sk_g16.c | outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */ |
outb | 675 | drivers/net/sk_g16.c | outb(POS_ADDR, SK_POS3); /* Set RAM address */ |
outb | 676 | drivers/net/sk_g16.c | outb(SK_RAM_ON, SK_POS2); /* enable RAM */ |
outb | 684 | drivers/net/sk_g16.c | outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off*/ |
outb | 685 | drivers/net/sk_g16.c | outb(POS_ADDR, SK_POS3); /* Set RAM address */ |
outb | 686 | drivers/net/sk_g16.c | outb(SK_RAM_ON, SK_POS2); /* enable RAM */ |
outb | 702 | drivers/net/sk_g16.c | outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */ |
outb | 703 | drivers/net/sk_g16.c | outb(POS_ADDR, SK_POS3); /* Set RAM address */ |
outb | 704 | drivers/net/sk_g16.c | outb(SK_ROM_RAM_ON, SK_POS2); /* RAM on, BOOT_ROM on */ |
outb | 722 | drivers/net/sk_g16.c | outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */ |
outb | 733 | drivers/net/sk_g16.c | outb(POS_ADDR, SK_POS3); /* Set RAM on Boot_ROM address */ |
outb | 746 | drivers/net/sk_g16.c | outb(POS_ADDR, SK_POS3); /* Set RAM address */ |
outb | 748 | drivers/net/sk_g16.c | outb(SK_RAM_ON, SK_POS2); /* enable RAM */ |
outb | 902 | drivers/net/sk_g16.c | outb(i<<2, SK_POS4); /* Set Card on probed IRQ */ |
outb | 919 | drivers/net/sk_g16.c | outb(0x08, SK_POS4); /* set card to IRQ2 */ |
outb | 952 | drivers/net/sk_g16.c | outb(i<<2, SK_POS4); /* Set IRQ on card */ |
outb | 298 | drivers/net/skeleton.c | outb(0x00, ioaddr); |
outb | 127 | drivers/net/smc-ultra.c | outb(reg4, ioaddr + 4); |
outb | 146 | drivers/net/smc-ultra.c | outb(0x80 | reg4, ioaddr + 4); |
outb | 149 | drivers/net/smc-ultra.c | outb(0x80 | inb(ioaddr + 0x0c), ioaddr + 0x0c); |
outb | 155 | drivers/net/smc-ultra.c | outb(reg4, ioaddr + 4); |
outb | 222 | drivers/net/smc-ultra.c | outb(ULTRA_MEMENB, ioaddr); /* Enable memory, 16 bit mode. */ |
outb | 223 | drivers/net/smc-ultra.c | outb(0x80, ioaddr + 5); |
outb | 224 | drivers/net/smc-ultra.c | outb(0x01, ioaddr + 6); /* Enable interrupts and memory. */ |
outb | 233 | drivers/net/smc-ultra.c | outb(ULTRA_RESET, cmd_port); |
outb | 237 | drivers/net/smc-ultra.c | outb(ULTRA_MEMENB, cmd_port); |
outb | 253 | drivers/net/smc-ultra.c | outb(ULTRA_MEMENB, dev->base_addr - ULTRA_NIC_OFFSET); |
outb | 261 | drivers/net/smc-ultra.c | outb(0x00, dev->base_addr - ULTRA_NIC_OFFSET); /* Disable memory. */ |
outb | 266 | drivers/net/smc-ultra.c | outb(0x00, dev->base_addr - ULTRA_NIC_OFFSET); /* Disable memory. */ |
outb | 278 | drivers/net/smc-ultra.c | outb(ULTRA_MEMENB, dev->base_addr - ULTRA_NIC_OFFSET); |
outb | 282 | drivers/net/smc-ultra.c | outb(0x00, dev->base_addr - ULTRA_NIC_OFFSET); /* Disable memory. */ |
outb | 296 | drivers/net/smc-ultra.c | outb(0x00, ioaddr + 6); /* Disable interrupts. */ |
outb | 260 | drivers/net/wavelan.c | outb(*b, PIOP2(ioaddr)); |
outb | 155 | drivers/net/wd.c | outb( tmp ^ 0x01, ioaddr+1 ); /* attempt to clear 16bit bit */ |
outb | 160 | drivers/net/wd.c | outb( NIC16 | (asic_reg5&0x1f), ioaddr+WD_CMDREG5); |
outb | 161 | drivers/net/wd.c | outb(tmp, ioaddr+1); |
outb | 168 | drivers/net/wd.c | outb(tmp, ioaddr+1); /* Restore original reg1 value. */ |
outb | 212 | drivers/net/wd.c | outb(0x00, nic_addr+EN0_IMR); /* Disable all intrs. */ |
outb | 217 | drivers/net/wd.c | outb(E8390_RREAD+E8390_START, nic_addr); /* Trigger it... */ |
outb | 268 | drivers/net/wd.c | outb(inb(ioaddr+4)|0x80, ioaddr+4); |
outb | 285 | drivers/net/wd.c | outb(ei_status.reg5, ioaddr+WD_CMDREG5); |
outb | 286 | drivers/net/wd.c | outb(ei_status.reg0, ioaddr); /* WD_CMDREG */ |
outb | 296 | drivers/net/wd.c | outb(WD_RESET, wd_cmd_port); |
outb | 301 | drivers/net/wd.c | outb((((dev->mem_start>>13) & 0x3f)|WD_MEMENB), wd_cmd_port); |
outb | 303 | drivers/net/wd.c | outb(NIC16 | ((dev->mem_start>>19) & 0x1f), wd_cmd_port+WD_CMDREG5); |
outb | 324 | drivers/net/wd.c | outb(ISA16 | ei_status.reg5, wd_cmdreg+WD_CMDREG5); |
outb | 340 | drivers/net/wd.c | outb(ei_status.reg5, wd_cmdreg+WD_CMDREG5); |
outb | 355 | drivers/net/wd.c | outb(ISA16 | ei_status.reg5, wd_cmdreg+WD_CMDREG5); |
outb | 357 | drivers/net/wd.c | outb(ei_status.reg5, wd_cmdreg+WD_CMDREG5); |
outb | 374 | drivers/net/wd.c | outb(ei_status.reg5, wd_cmdreg + WD_CMDREG5 ); |
outb | 377 | drivers/net/wd.c | outb(ei_status.reg0 & ~WD_MEMENB, wd_cmdreg); |
outb | 294 | drivers/net/znet.c | outb(0x10, 0xe6); /* Select LAN control register */ |
outb | 295 | drivers/net/znet.c | outb(inb(0xe7) | 0x84, 0xe7); /* Turn on LAN power (bit 2). */ |
outb | 330 | drivers/net/znet.c | outb(CMD0_STAT0, ioaddr); event = inb(ioaddr); |
outb | 331 | drivers/net/znet.c | outb(CMD0_STAT1, ioaddr); tx_status = inw(ioaddr); |
outb | 332 | drivers/net/znet.c | outb(CMD0_STAT2, ioaddr); rx_offset = inw(ioaddr); |
outb | 333 | drivers/net/znet.c | outb(CMD0_STAT3, ioaddr); state = inb(ioaddr); |
outb | 339 | drivers/net/znet.c | outb(CMD0_RESET, ioaddr); |
outb | 349 | drivers/net/znet.c | outb(CMD0_STAT0, ioaddr); |
outb | 393 | drivers/net/znet.c | outb(CMD0_TRANSMIT + CMD0_CHNL_1,ioaddr); |
outb | 419 | drivers/net/znet.c | outb(CMD0_STAT0, ioaddr); |
outb | 424 | drivers/net/znet.c | outb(CMD0_STAT1, ioaddr); |
outb | 426 | drivers/net/znet.c | outb(CMD0_STAT2, ioaddr); |
outb | 428 | drivers/net/znet.c | outb(CMD0_STAT3, ioaddr); |
outb | 439 | drivers/net/znet.c | outb(CMD0_STAT1, ioaddr); |
outb | 463 | drivers/net/znet.c | outb(CMD0_ACK,ioaddr); |
outb | 479 | drivers/net/znet.c | outb(CMD0_STAT2, ioaddr); |
outb | 601 | drivers/net/znet.c | outb(CMD0_RESET, ioaddr); /* CMD0_RESET */ |
outb | 611 | drivers/net/znet.c | outb(0x10, 0xe6); /* Select LAN control register */ |
outb | 612 | drivers/net/znet.c | outb(inb(0xe7) & ~0x84, 0xe7); /* Turn on LAN power (bit 2). */ |
outb | 658 | drivers/net/znet.c | outb(CMD0_CONFIGURE+CMD0_CHNL_1, ioaddr); |
outb | 664 | drivers/net/znet.c | outb(CMD0_MULTICAST_LIST+CMD0_CHNL_1, ioaddr); |
outb | 689 | drivers/net/znet.c | outb(CMD0_RESET, ioaddr); |
outb | 715 | drivers/net/znet.c | outb(CMD0_CONFIGURE+CMD0_CHNL_1, ioaddr); |
outb | 720 | drivers/net/znet.c | outb(CMD0_CONFIGURE+CMD0_CHNL_1, ioaddr); |
outb | 725 | drivers/net/znet.c | outb(CMD0_IA_SETUP + CMD0_CHNL_1, ioaddr); |
outb | 730 | drivers/net/znet.c | outb(CMD0_Rx_ENABLE+CMD0_CHNL_0, ioaddr); |
outb | 736 | drivers/net/znet.c | outb(CMD0_PORT_1, ioaddr); |
outb | 740 | drivers/net/znet.c | outb((rx_stop_offset >> 6) | 0x80, ioaddr); |
outb | 741 | drivers/net/znet.c | outb(CMD1_PORT_0, ioaddr); |
outb | 1346 | drivers/scsi/53c7,8xx.h | outb((value), NCR53c7x0_address_io + (address))) |
outb | 314 | drivers/scsi/aha152x.h | outb( (VAL), (PORT) ) |
outb | 329 | drivers/scsi/aha152x.h | outb( (inb(PORT) | (BITS)), (PORT) ) |
outb | 332 | drivers/scsi/aha152x.h | outb( (inb(PORT) & ~(BITS)), (PORT) ) |
outb | 335 | drivers/scsi/aha152x.h | outb( (inb(PORT) & ~(CLR)) | (SET) , (PORT) ) |
outb | 117 | drivers/scsi/aha1542.c | #define aha1542_intr_reset(base) outb(IRST, CONTROL(base)) |
outb | 164 | drivers/scsi/aha1542.c | outb(*cmdp, DATA(base)); |
outb | 174 | drivers/scsi/aha1542.c | outb(*cmdp++, DATA(base)); |
outb | 302 | drivers/scsi/aha1542.c | outb(SRST|IRST/*|SCRST*/, CONTROL(bse)); |
outb | 342 | drivers/scsi/aha1542.c | outb(IRST, CONTROL(bse)); |
outb | 1008 | drivers/scsi/aha1542.c | outb((dma_chan - 4) | CASCADE, DMA_MODE_REG); |
outb | 1009 | drivers/scsi/aha1542.c | outb(dma_chan - 4, DMA_MASK_REG); |
outb | 1177 | drivers/scsi/aha1542.c | outb(SCRST, CONTROL(SCpnt->host->io_port)); |
outb | 186 | drivers/scsi/aha1740.c | outb(G2CNTRL_IRST,G2CNTRL); /* interrupt reset */ |
outb | 193 | drivers/scsi/aha1740.c | outb(G2CNTRL_HRDY,G2CNTRL); /* Host Ready -> Mailbox in complete */ |
outb | 233 | drivers/scsi/aha1740.c | outb(G2CNTRL_HRDY,G2CNTRL); /* Host Ready -> Mailbox in complete */ |
outb | 396 | drivers/scsi/aha1740.c | outb(ATTN_START | (target & 7), ATTN); /* Start it up */ |
outb | 432 | drivers/scsi/aha1740.c | outb(inb(INTDEF) | 0x10, INTDEF); |
outb | 458 | drivers/scsi/aha1740.c | outb(G2CNTRL_HRST,G2CNTRL); |
outb | 459 | drivers/scsi/aha1740.c | outb(0,G2CNTRL); |
outb | 666 | drivers/scsi/aic7xxx.c | outb(p->pause, HCNTRL(p->base)); \ |
outb | 675 | drivers/scsi/aic7xxx.c | outb(p->unpause, HCNTRL(p->base)) |
outb | 682 | drivers/scsi/aic7xxx.c | outb(SEQRESET | FASTMODE, SEQCTL(p->base)); \ |
outb | 1086 | drivers/scsi/aic7xxx.c | outb(PERRORDIS | SEQRESET | LOADRAM, SEQCTL(base)); |
outb | 1111 | drivers/scsi/aic7xxx.c | outb(SEQRESET | FASTMODE, SEQCTL(base)); |
outb | 1225 | drivers/scsi/aic7xxx.c | outb(scb->position, QINFIFO(base)); |
outb | 1233 | drivers/scsi/aic7xxx.c | outb(SCBAUTO, SCBCNT(base)); |
outb | 1242 | drivers/scsi/aic7xxx.c | outb(0, SCBCNT(base)); |
outb | 1262 | drivers/scsi/aic7xxx.c | outb(SCBAUTO, SCBCNT(base)); |
outb | 1271 | drivers/scsi/aic7xxx.c | outb(0, SCBCNT(base)); |
outb | 1287 | drivers/scsi/aic7xxx.c | outb(SCBAUTO, SCBCNT(base)); |
outb | 1296 | drivers/scsi/aic7xxx.c | outb(0, SCBCNT(base)); |
outb | 1494 | drivers/scsi/aic7xxx.c | outb(active, HA_ACTIVE1(base)); |
outb | 1500 | drivers/scsi/aic7xxx.c | outb(active, HA_ACTIVE0(base)); |
outb | 1503 | drivers/scsi/aic7xxx.c | outb(SCB_NEEDDMA, SCBARRAY(base)); |
outb | 1510 | drivers/scsi/aic7xxx.c | outb(CLRSELTIMEO, CLRSINT1(base)); |
outb | 1547 | drivers/scsi/aic7xxx.c | outb(rate, HA_TARG_SCRATCH(base) + scsi_id); |
outb | 1548 | drivers/scsi/aic7xxx.c | outb(rate, SCSIRATE(base)); |
outb | 1556 | drivers/scsi/aic7xxx.c | outb(SEND_REJ, HA_RETURN_1(base)); |
outb | 1568 | drivers/scsi/aic7xxx.c | outb(0, HA_RETURN_1(base)); |
outb | 1576 | drivers/scsi/aic7xxx.c | outb(SEND_SDTR, HA_RETURN_1(base)); |
outb | 1604 | drivers/scsi/aic7xxx.c | outb(0, HA_RETURN_1(base)); |
outb | 1641 | drivers/scsi/aic7xxx.c | outb(bus_width | SEND_WDTR, HA_RETURN_1(base)); |
outb | 1645 | drivers/scsi/aic7xxx.c | outb(scratch, HA_TARG_SCRATCH(base) + scsi_id); |
outb | 1646 | drivers/scsi/aic7xxx.c | outb(scratch, SCSIRATE(base)); |
outb | 1680 | drivers/scsi/aic7xxx.c | outb(targ_scratch, HA_TARG_SCRATCH(base) + scsi_id); |
outb | 1694 | drivers/scsi/aic7xxx.c | outb(targ_scratch, HA_TARG_SCRATCH(base) + scsi_id); |
outb | 1702 | drivers/scsi/aic7xxx.c | outb(targ_scratch, HA_TARG_SCRATCH(base) + scsi_id); |
outb | 1703 | drivers/scsi/aic7xxx.c | outb(targ_scratch, SCSIRATE(base)); |
outb | 1711 | drivers/scsi/aic7xxx.c | outb(0, HA_RETURN_1(base)); /* CHECK_CONDITION may change this */ |
outb | 1781 | drivers/scsi/aic7xxx.c | outb(SCBAUTO, SCBCNT(base)); |
outb | 1788 | drivers/scsi/aic7xxx.c | outb(0, SCBCNT(base)); |
outb | 1789 | drivers/scsi/aic7xxx.c | outb(SCB_LIST_NULL, (SCBARRAY(base) + 30)); |
outb | 1806 | drivers/scsi/aic7xxx.c | outb(head, SCBPTR(base)); |
outb | 1807 | drivers/scsi/aic7xxx.c | outb(tail, (SCBARRAY(base) + 30)); |
outb | 1811 | drivers/scsi/aic7xxx.c | outb(tail, SCBPTR(base)); |
outb | 1813 | drivers/scsi/aic7xxx.c | outb(tail, (SCBARRAY(base) + 30)); |
outb | 1816 | drivers/scsi/aic7xxx.c | outb(head, WAITING_SCBH(base)); |
outb | 1817 | drivers/scsi/aic7xxx.c | outb(tail, WAITING_SCBT(base)); |
outb | 1818 | drivers/scsi/aic7xxx.c | outb(SEND_SENSE, HA_RETURN_1(base)); |
outb | 1962 | drivers/scsi/aic7xxx.c | outb(MSG_BUS_DEVICE_RESET, HA_MSG_START(base)); |
outb | 1963 | drivers/scsi/aic7xxx.c | outb(1, HA_MSG_LEN(base)); |
outb | 1978 | drivers/scsi/aic7xxx.c | outb(CLRSEQINT, CLRINT(base)); |
outb | 1996 | drivers/scsi/aic7xxx.c | outb(status, CLRSINT1(base)); |
outb | 1998 | drivers/scsi/aic7xxx.c | outb(CLRSCSIINT, CLRINT(base)); |
outb | 2022 | drivers/scsi/aic7xxx.c | outb(ENRSELI, SCSISEQ(base)); |
outb | 2029 | drivers/scsi/aic7xxx.c | outb(ha_flags & ~ACTIVE_MSG, HA_FLAGS(base)); |
outb | 2035 | drivers/scsi/aic7xxx.c | outb(active, HA_ACTIVE1(base)); |
outb | 2041 | drivers/scsi/aic7xxx.c | outb(active, HA_ACTIVE0(base)); |
outb | 2045 | drivers/scsi/aic7xxx.c | outb(SCB_NEEDDMA, SCBARRAY(base)); |
outb | 2063 | drivers/scsi/aic7xxx.c | outb(CLRSELTIMEO, CLRSINT1(base)); |
outb | 2065 | drivers/scsi/aic7xxx.c | outb(CLRSCSIINT, CLRINT(base)); |
outb | 2069 | drivers/scsi/aic7xxx.c | outb(waiting, SCBPTR(base)); |
outb | 2071 | drivers/scsi/aic7xxx.c | outb(waiting, WAITING_SCBH(base)); |
outb | 2116 | drivers/scsi/aic7xxx.c | outb(CLRSCSIPERR, CLRSINT1(base)); |
outb | 2119 | drivers/scsi/aic7xxx.c | outb(CLRSCSIINT, CLRINT(base)); |
outb | 2131 | drivers/scsi/aic7xxx.c | outb(status, CLRSINT1(base)); |
outb | 2133 | drivers/scsi/aic7xxx.c | outb(CLRSCSIINT, CLRINT(base)); |
outb | 2161 | drivers/scsi/aic7xxx.c | outb(CLRCMDINT, CLRINT(base)); |
outb | 2208 | drivers/scsi/aic7xxx.c | outb(CLRCMDINT, CLRINT(base)); |
outb | 2258 | drivers/scsi/aic7xxx.c | outb(0x80 + i, base); |
outb | 2357 | drivers/scsi/aic7xxx.c | outb(SEEMS, SEECTL(base)); |
outb | 2365 | drivers/scsi/aic7xxx.c | outb (0, SEECTL(base)); |
outb | 2378 | drivers/scsi/aic7xxx.c | outb(SEEMS | SEECK | SEECS, SEECTL(base)); |
outb | 2388 | drivers/scsi/aic7xxx.c | outb(temp, SEECTL(base)); |
outb | 2391 | drivers/scsi/aic7xxx.c | outb(temp, SEECTL(base)); |
outb | 2400 | drivers/scsi/aic7xxx.c | outb(temp, SEECTL(base)); |
outb | 2403 | drivers/scsi/aic7xxx.c | outb(temp, SEECTL(base)); |
outb | 2416 | drivers/scsi/aic7xxx.c | outb(temp, SEECTL(base)); |
outb | 2420 | drivers/scsi/aic7xxx.c | outb(temp, SEECTL(base)); |
outb | 2436 | drivers/scsi/aic7xxx.c | outb(SEEMS, SEECTL(base)); |
outb | 2438 | drivers/scsi/aic7xxx.c | outb(SEEMS | SEECK, SEECTL(base)); |
outb | 2440 | drivers/scsi/aic7xxx.c | outb(SEEMS, SEECTL(base)); |
outb | 2465 | drivers/scsi/aic7xxx.c | outb(0, SEECTL(base)); |
outb | 2496 | drivers/scsi/aic7xxx.c | outb(sblkctl_reg, SBLKCTL(base)); |
outb | 2500 | drivers/scsi/aic7xxx.c | outb(sblkctl_reg ^ AUTOFLUSHDIS, SBLKCTL(base)); |
outb | 2612 | drivers/scsi/aic7xxx.c | outb(config.pause | CHIPRST, HCNTRL(config.base)); |
outb | 2618 | drivers/scsi/aic7xxx.c | outb(config.pause, HCNTRL(config.base)); |
outb | 2638 | drivers/scsi/aic7xxx.c | outb(CHIPRST, HCNTRL(config.base)); |
outb | 2658 | drivers/scsi/aic7xxx.c | outb(CHIPRST, HCNTRL(config.base)); |
outb | 2688 | drivers/scsi/aic7xxx.c | outb(inb(DSPCISTATUS(config.base)) | DFTHRESH, DSPCISTATUS(config.base)); |
outb | 2689 | drivers/scsi/aic7xxx.c | outb(config.scsi_id | DFTHRESH, HA_SCSICONF(config.base)); |
outb | 2694 | drivers/scsi/aic7xxx.c | outb(config.scsi_id, (HA_SCSICONF(config.base) + 1)); |
outb | 2731 | drivers/scsi/aic7xxx.c | outb(0, HA_FLAGS(base)); |
outb | 2739 | drivers/scsi/aic7xxx.c | outb(WIDE_BUS, HA_FLAGS(base)); |
outb | 2749 | drivers/scsi/aic7xxx.c | outb(TWIN_BUS, HA_FLAGS(base)); |
outb | 2754 | drivers/scsi/aic7xxx.c | outb(0, HA_FLAGS(base)); |
outb | 2761 | drivers/scsi/aic7xxx.c | outb(0, HA_FLAGS(base)); |
outb | 2771 | drivers/scsi/aic7xxx.c | outb(sblkctl, SBLKCTL(base)); |
outb | 2918 | drivers/scsi/aic7xxx.c | outb(FASTMODE, SEQCTL(base)); |
outb | 2922 | drivers/scsi/aic7xxx.c | outb(ENABLE, BCTL(base)); |
outb | 2936 | drivers/scsi/aic7xxx.c | outb(config.scsi_id_b, SCSIID(base)); |
outb | 2939 | drivers/scsi/aic7xxx.c | outb(scsi_conf, SXFRCTL1(base)); |
outb | 2940 | drivers/scsi/aic7xxx.c | outb(ENSELTIMO | ENSCSIPERR, SIMODE1(base)); |
outb | 2942 | drivers/scsi/aic7xxx.c | outb(0, SBLKCTL(base)); |
outb | 2944 | drivers/scsi/aic7xxx.c | outb(config.scsi_id, SCSIID(base)); |
outb | 2946 | drivers/scsi/aic7xxx.c | outb(scsi_conf | ENSTIMER | ACTNEGEN | STPWEN, SXFRCTL1(base)); |
outb | 2947 | drivers/scsi/aic7xxx.c | outb(ENSELTIMO | ENSCSIPERR, SIMODE1(base)); |
outb | 3005 | drivers/scsi/aic7xxx.c | outb(target_settings, (HA_TARG_SCRATCH(base) + i)); |
outb | 3019 | drivers/scsi/aic7xxx.c | outb(i, SCBPTR(base)); |
outb | 3020 | drivers/scsi/aic7xxx.c | outb(0, SCBARRAY(base)); |
outb | 3027 | drivers/scsi/aic7xxx.c | outb(config.maxscb, HA_SCBCOUNT(base)); |
outb | 3032 | drivers/scsi/aic7xxx.c | outb(0, HA_ACTIVE0(base)); |
outb | 3033 | drivers/scsi/aic7xxx.c | outb(0, HA_ACTIVE1(base)); |
outb | 3036 | drivers/scsi/aic7xxx.c | outb (SCB_LIST_NULL, WAITING_SCBH(base)); |
outb | 3037 | drivers/scsi/aic7xxx.c | outb (SCB_LIST_NULL, WAITING_SCBT(base)); |
outb | 3055 | drivers/scsi/aic7xxx.c | outb(SCSIRSTO, SCSISEQ(base)); |
outb | 3057 | drivers/scsi/aic7xxx.c | outb(0, SCSISEQ(base)); |
outb | 3118 | drivers/scsi/aic7xxx.c | outb(inb(HCNTRL(base)) | CHIPRST, HCNTRL(base)); |
outb | 3216 | drivers/scsi/aic7xxx.c | outb(inb(HCNTRL(base)) | CHIPRST, HCNTRL(base)); |
outb | 3467 | drivers/scsi/aic7xxx.c | outb(scb->position, SCBPTR(p->base)); |
outb | 3469 | drivers/scsi/aic7xxx.c | outb(curscb, SCBPTR(p->base)); |
outb | 3511 | drivers/scsi/aic7xxx.c | outb(scb->position, SCBPTR(p->base)); |
outb | 3515 | drivers/scsi/aic7xxx.c | outb(scb->position, QINFIFO(p->base)); |
outb | 3516 | drivers/scsi/aic7xxx.c | outb(old_scbptr, SCBPTR(p->base)); |
outb | 3606 | drivers/scsi/aic7xxx.c | outb(scbsave[queued], QINFIFO(p->base)); |
outb | 3626 | drivers/scsi/aic7xxx.c | outb(scb->position, SCBPTR(p->base)); |
outb | 3629 | drivers/scsi/aic7xxx.c | outb(scb_control, SCBARRAY(p->base)); |
outb | 3630 | drivers/scsi/aic7xxx.c | outb(active_scb, SCBPTR(p->base)); |
outb | 3639 | drivers/scsi/aic7xxx.c | outb(scb_control, SCBARRAY(p->base)); |
outb | 3661 | drivers/scsi/aic7xxx.c | outb(0, HA_ACTIVE1(p->base)); |
outb | 3671 | drivers/scsi/aic7xxx.c | outb(0, HA_ACTIVE0(p->base)); |
outb | 3672 | drivers/scsi/aic7xxx.c | outb(0, HA_ACTIVE1(p->base)); |
outb | 3678 | drivers/scsi/aic7xxx.c | outb(0, HA_ACTIVE0(p->base)); |
outb | 3682 | drivers/scsi/aic7xxx.c | outb(SCSIRSTO, SCSISEQ(p->base)); |
outb | 3684 | drivers/scsi/aic7xxx.c | outb(0, SCSISEQ(p->base)); |
outb | 3691 | drivers/scsi/aic7xxx.c | outb(flags | ACTIVE_MSG, HA_FLAGS(p->base)); /* active message */ |
outb | 3692 | drivers/scsi/aic7xxx.c | outb(1, HA_MSG_LEN(p->base)); /* length = 1 */ |
outb | 3693 | drivers/scsi/aic7xxx.c | outb(message, HA_MSG_START(p->base)); /* message body */ |
outb | 3700 | drivers/scsi/aic7xxx.c | outb(inb(HA_SIGSTATE(p->base)) | 0x10, SCSISIGO(p->base)); |
outb | 3818 | drivers/scsi/aic7xxx.c | outb(SCSIRSTO, SCSISEQ(p->base)); |
outb | 3820 | drivers/scsi/aic7xxx.c | outb(0, SCSISEQ(p->base)); |
outb | 189 | drivers/scsi/buslogic.c | #define INTR_RESET(base) outb(RINT, CONTROL(base)) |
outb | 260 | drivers/scsi/buslogic.c | outb(*cmdp, COMMAND_PARAMETER(base)); |
outb | 271 | drivers/scsi/buslogic.c | outb(*cmdp++, COMMAND_PARAMETER(base)); |
outb | 972 | drivers/scsi/buslogic.c | outb(RSOFT | RINT/* | RSBUS*/, CONTROL(base)); |
outb | 1446 | drivers/scsi/buslogic.c | outb(RSBUS, CONTROL(scpnt->host->io_port)); |
outb | 336 | drivers/scsi/eata.c | outb((char) addr, iobase + REG_LOW); |
outb | 337 | drivers/scsi/eata.c | outb((char) (addr >> 8), iobase + REG_LM); |
outb | 338 | drivers/scsi/eata.c | outb((char) (addr >> 16), iobase + REG_MID); |
outb | 339 | drivers/scsi/eata.c | outb((char) (addr >> 24), iobase + REG_MSB); |
outb | 342 | drivers/scsi/eata.c | outb(cmd, iobase + REG_CMD); |
outb | 316 | drivers/scsi/eata_dma.c | outb( addr & 0x000000ff, base + HA_WDMAADDR); |
outb | 317 | drivers/scsi/eata_dma.c | outb((addr & 0x0000ff00) >> 8, base + HA_WDMAADDR + 1); |
outb | 318 | drivers/scsi/eata_dma.c | outb((addr & 0x00ff0000) >> 16, base + HA_WDMAADDR + 2); |
outb | 319 | drivers/scsi/eata_dma.c | outb((addr & 0xff000000) >> 24, base + HA_WDMAADDR + 3); |
outb | 320 | drivers/scsi/eata_dma.c | outb(command, base + HA_WCOMMAND); |
outb | 329 | drivers/scsi/eata_dma.c | outb( addr & 0x000000ff, base + HA_WDMAADDR); |
outb | 330 | drivers/scsi/eata_dma.c | outb((addr & 0x0000ff00) >> 8, base + HA_WDMAADDR + 1); |
outb | 331 | drivers/scsi/eata_dma.c | outb((addr & 0x00ff0000) >> 16, base + HA_WDMAADDR + 2); |
outb | 332 | drivers/scsi/eata_dma.c | outb((addr & 0xff000000) >> 24, base + HA_WDMAADDR + 3); |
outb | 334 | drivers/scsi/eata_dma.c | outb(id, base + HA_WSUBCODE); |
outb | 335 | drivers/scsi/eata_dma.c | outb(lun, base + HA_WSUBLUN); |
outb | 338 | drivers/scsi/eata_dma.c | outb(cmnd2, base + HA_WCOMMAND2); |
outb | 339 | drivers/scsi/eata_dma.c | outb(cmnd, base + HA_WCOMMAND); |
outb | 277 | drivers/scsi/eata_pio.c | outb(command, base + HA_WCOMMAND); |
outb | 400 | drivers/scsi/eata_pio.c | outb(EATA_CMD_PIO_TRUNC, base + HA_WCOMMAND); |
outb | 501 | drivers/scsi/eata_pio.c | outb((uint) cmd->host->base+HA_WCOMMAND, EATA_CMD_RESET); |
outb | 572 | drivers/scsi/eata_pio.c | outb(EATA_CMD_PIO_TRUNC, base + HA_WCOMMAND); |
outb | 665 | drivers/scsi/eata_pio.c | outb(EATA_CMD_PIO_SETUPTEST,base+HA_WCOMMAND); |
outb | 454 | drivers/scsi/fdomain.c | outb( 0, SCSI_Cntl_port ); |
outb | 455 | drivers/scsi/fdomain.c | outb( 0, SCSI_Mode_Cntl_port ); |
outb | 457 | drivers/scsi/fdomain.c | outb( 0x21 | PARITY_MASK, TMC_Cntl_port ); /* Clear forced intr. */ |
outb | 459 | drivers/scsi/fdomain.c | outb( 0x01 | PARITY_MASK, TMC_Cntl_port ); |
outb | 490 | drivers/scsi/fdomain.c | outb( 0x80, port + IO_Control ); |
outb | 492 | drivers/scsi/fdomain.c | outb( 0x00, port + IO_Control ); |
outb | 521 | drivers/scsi/fdomain.c | outb( i, port_base + Write_Loopback ); |
outb | 1028 | drivers/scsi/fdomain.c | outb( 0x00, SCSI_Cntl_port ); /* Disable data drivers */ |
outb | 1029 | drivers/scsi/fdomain.c | outb( adapter_mask, port_base + SCSI_Data_NoACK ); /* Set our id bit */ |
outb | 1030 | drivers/scsi/fdomain.c | outb( 0x04 | PARITY_MASK, TMC_Cntl_port ); /* Start arbitration */ |
outb | 1059 | drivers/scsi/fdomain.c | outb( 0x82, SCSI_Cntl_port ); /* Bus Enable + Select */ |
outb | 1060 | drivers/scsi/fdomain.c | outb( adapter_mask | (1 << target), SCSI_Data_NoACK_port ); |
outb | 1063 | drivers/scsi/fdomain.c | outb( PARITY_MASK, TMC_Cntl_port ); |
outb | 1072 | drivers/scsi/fdomain.c | outb( 0x80, SCSI_Cntl_port ); |
outb | 1096 | drivers/scsi/fdomain.c | outb( 0x00, Interrupt_Cntl_port ); |
outb | 1124 | drivers/scsi/fdomain.c | outb( 0x00, Interrupt_Cntl_port ); |
outb | 1159 | drivers/scsi/fdomain.c | outb( 0x40 | FIFO_COUNT, Interrupt_Cntl_port ); |
outb | 1161 | drivers/scsi/fdomain.c | outb( 0x82, SCSI_Cntl_port ); /* Bus Enable + Select */ |
outb | 1162 | drivers/scsi/fdomain.c | outb( adapter_mask | (1 << current_SC->target), SCSI_Data_NoACK_port ); |
outb | 1165 | drivers/scsi/fdomain.c | outb( 0x10 | PARITY_MASK, TMC_Cntl_port ); |
outb | 1185 | drivers/scsi/fdomain.c | outb( 0x10 | PARITY_MASK, TMC_Cntl_port ); |
outb | 1189 | drivers/scsi/fdomain.c | outb( 0x90 | FIFO_COUNT, Interrupt_Cntl_port ); |
outb | 1190 | drivers/scsi/fdomain.c | outb( 0x80, SCSI_Cntl_port ); |
outb | 1206 | drivers/scsi/fdomain.c | outb( current_SC->cmnd[current_SC->SCp.sent_command++], |
outb | 1216 | drivers/scsi/fdomain.c | outb( 0xd0 | PARITY_MASK, TMC_Cntl_port ); |
outb | 1222 | drivers/scsi/fdomain.c | outb( 0x90 | PARITY_MASK, TMC_Cntl_port ); |
outb | 1240 | drivers/scsi/fdomain.c | outb( MESSAGE_REJECT, Write_SCSI_Data_port ); /* Reject */ |
outb | 1409 | drivers/scsi/fdomain.c | outb( 0xd0 | PARITY_MASK, TMC_Cntl_port ); |
outb | 1416 | drivers/scsi/fdomain.c | outb( 0x90 | PARITY_MASK, TMC_Cntl_port ); |
outb | 1433 | drivers/scsi/fdomain.c | outb( *current_SC->SCp.ptr++, Write_FIFO_port ); |
outb | 1528 | drivers/scsi/fdomain.c | outb( 0xd0 | FIFO_COUNT, Interrupt_Cntl_port ); |
outb | 1529 | drivers/scsi/fdomain.c | outb( 0x00, SCSI_Cntl_port ); |
outb | 1531 | drivers/scsi/fdomain.c | outb( 0x90 | FIFO_COUNT, Interrupt_Cntl_port ); |
outb | 1581 | drivers/scsi/fdomain.c | outb( 0x00, Interrupt_Cntl_port ); |
outb | 1582 | drivers/scsi/fdomain.c | outb( 0x00, SCSI_Cntl_port ); /* Disable data drivers */ |
outb | 1583 | drivers/scsi/fdomain.c | outb( adapter_mask, SCSI_Data_NoACK_port ); /* Set our id bit */ |
outb | 1585 | drivers/scsi/fdomain.c | outb( 0x20, Interrupt_Cntl_port ); |
outb | 1586 | drivers/scsi/fdomain.c | outb( 0x14 | PARITY_MASK, TMC_Cntl_port ); /* Start arbitration */ |
outb | 1650 | drivers/scsi/fdomain.c | outb( 0x0a, 0xa0 ); |
outb | 1652 | drivers/scsi/fdomain.c | outb( 0x0a, 0x20 ); |
outb | 1654 | drivers/scsi/fdomain.c | outb( 0x0b, 0xa0 ); |
outb | 1656 | drivers/scsi/fdomain.c | outb( 0x0b, 0x20 ); |
outb | 1735 | drivers/scsi/fdomain.c | outb( 1, SCSI_Cntl_port ); |
outb | 1737 | drivers/scsi/fdomain.c | outb( 0, SCSI_Cntl_port ); |
outb | 1739 | drivers/scsi/fdomain.c | outb( 0, SCSI_Mode_Cntl_port ); |
outb | 1740 | drivers/scsi/fdomain.c | outb( PARITY_MASK, TMC_Cntl_port ); |
outb | 75 | drivers/scsi/g_NCR5380.h | #define NCR5380_write(reg, value) (outb((value), (port + (reg)))) |
outb | 165 | drivers/scsi/in2000.c | outb(TXCNTH,INSTAT); /* then autoincrement */ |
outb | 167 | drivers/scsi/in2000.c | outb(TXCNTM,INSTAT); |
outb | 169 | drivers/scsi/in2000.c | outb(TXCNTL,INSTAT); |
outb | 219 | drivers/scsi/in2000.c | outb(2, ININTR); /* Mask FIFO Interrupts when done */ |
outb | 271 | drivers/scsi/in2000.c | outb(2, ININTR); /* Mask FIFO Interrupts when done */ |
outb | 288 | drivers/scsi/in2000.c | outb(SCSIST,INSTAT); |
outb | 290 | drivers/scsi/in2000.c | outb(TARGETU,INSTAT); /* then autoincrement */ |
outb | 292 | drivers/scsi/in2000.c | outb(CMDPHAS,INSTAT); |
outb | 310 | drivers/scsi/in2000.c | outb(2,ININTR); /* Disable fifo interrupts */ |
outb | 354 | drivers/scsi/in2000.c | outb(0,INFLED); |
outb | 358 | drivers/scsi/in2000.c | outb(COMMAND,INSTAT); |
outb | 359 | drivers/scsi/in2000.c | outb(1,INDATA); /* ABORT COMMAND */ |
outb | 371 | drivers/scsi/in2000.c | outb(CMDPHAS,INSTAT); |
outb | 380 | drivers/scsi/in2000.c | outb(0x41,INDATA); /* rdy to disconn */ |
outb | 383 | drivers/scsi/in2000.c | outb(0x30,INDATA); /* rdy to send cmd bytes */ |
outb | 386 | drivers/scsi/in2000.c | outb(0x45,INDATA); /* To go to status phase,*/ |
outb | 387 | drivers/scsi/in2000.c | outb(TXCNTH,INSTAT); /* elim. data, autoinc */ |
outb | 388 | drivers/scsi/in2000.c | outb(0,INDATA); |
outb | 389 | drivers/scsi/in2000.c | outb(0,INDATA); |
outb | 390 | drivers/scsi/in2000.c | outb(0,INDATA); |
outb | 395 | drivers/scsi/in2000.c | outb(COMMAND,INSTAT); |
outb | 396 | drivers/scsi/in2000.c | outb(8,INDATA); /* RESTART THE COMMAND */ |
outb | 399 | drivers/scsi/in2000.c | outb(TIMEOUT,INSTAT); /* I got these values */ |
outb | 401 | drivers/scsi/in2000.c | outb(IN2000_TMOUT,INDATA); /* the Always' bios. */ |
outb | 402 | drivers/scsi/in2000.c | outb(CONTROL,INSTAT); |
outb | 403 | drivers/scsi/in2000.c | outb(0,INDATA); |
outb | 404 | drivers/scsi/in2000.c | outb(SYNCTXR,INSTAT); |
outb | 405 | drivers/scsi/in2000.c | outb(0x40,INDATA); /* async, 4 cyc xfer per. */ |
outb | 481 | drivers/scsi/in2000.c | outb(SCSIST,INSTAT); |
outb | 483 | drivers/scsi/in2000.c | outb(TARGETU,INSTAT); /* then autoinc */ |
outb | 512 | drivers/scsi/in2000.c | outb(TOTSECT, INSTAT); /* start here then autoincrement */ |
outb | 514 | drivers/scsi/in2000.c | outb(cmd[loop],INDATA); |
outb | 515 | drivers/scsi/in2000.c | outb(TARGETU,INSTAT); |
outb | 516 | drivers/scsi/in2000.c | outb(SCpnt->lun & 7,INDATA); |
outb | 518 | drivers/scsi/in2000.c | outb(TXCNTH,INSTAT); /* then autoincrement */ |
outb | 519 | drivers/scsi/in2000.c | outb(bufflen>>16,INDATA); |
outb | 520 | drivers/scsi/in2000.c | outb(bufflen>>8,INDATA); |
outb | 521 | drivers/scsi/in2000.c | outb(bufflen,INDATA); |
outb | 522 | drivers/scsi/in2000.c | outb(target&7,INDATA); |
outb | 528 | drivers/scsi/in2000.c | outb(0,INFRST); |
outb | 532 | drivers/scsi/in2000.c | outb(0,INFWRT); |
outb | 547 | drivers/scsi/in2000.c | outb(CONTROL,INSTAT); /* WD BUS Mode */ |
outb | 548 | drivers/scsi/in2000.c | outb(0x4C,INDATA); |
outb | 550 | drivers/scsi/in2000.c | outb(0,ININTR); /* Enable FIFO intrpt some boards? */ |
outb | 551 | drivers/scsi/in2000.c | outb(COMMAND,INSTAT); |
outb | 552 | drivers/scsi/in2000.c | outb(0,INNLED); |
outb | 553 | drivers/scsi/in2000.c | outb(8,INDATA); /* Select w/ATN & Transfer */ |
outb | 626 | drivers/scsi/in2000.c | outb(2,ININTR); /* Shut off the FIFO first, so it won't ask for data.*/ |
outb | 632 | drivers/scsi/in2000.c | outb(0,INFWRT); /* read mode so WD can intrpt */ |
outb | 633 | drivers/scsi/in2000.c | outb(SCSIST,INSTAT); |
outb | 635 | drivers/scsi/in2000.c | outb(OWNID,INSTAT); |
outb | 636 | drivers/scsi/in2000.c | outb(0x7,INDATA); /* we use addr 7 */ |
outb | 637 | drivers/scsi/in2000.c | outb(COMMAND,INSTAT); |
outb | 638 | drivers/scsi/in2000.c | outb(0,INDATA); /* do chip reset */ |
outb | 654 | drivers/scsi/in2000.c | outb(COMMAND,INSTAT); |
outb | 655 | drivers/scsi/in2000.c | outb(1,INDATA); /* Abort Command */ |
outb | 671 | drivers/scsi/in2000.c | outb(0,INFWRT); /* read mode so WD can intrpt */ |
outb | 672 | drivers/scsi/in2000.c | outb(SCSIST,INSTAT); |
outb | 674 | drivers/scsi/in2000.c | outb(OWNID,INSTAT); |
outb | 675 | drivers/scsi/in2000.c | outb(0x7,INDATA); /* ID=7,noadv, no parity, clk div=2 (8-10Mhz clk) */ |
outb | 676 | drivers/scsi/in2000.c | outb(COMMAND,INSTAT); |
outb | 677 | drivers/scsi/in2000.c | outb(0,INDATA); /* reset WD chip */ |
outb | 191 | drivers/scsi/pas16.c | outb( 0xbc + board_num, MASTER_ADDRESS_PTR ); |
outb | 192 | drivers/scsi/pas16.c | outb( port >> 2, MASTER_ADDRESS_PTR ); |
outb | 215 | drivers/scsi/pas16.c | outb( 0x30, io_port + P_TIMEOUT_COUNTER_REG ); /* Timeout counter */ |
outb | 216 | drivers/scsi/pas16.c | outb( 0x01, io_port + P_TIMEOUT_STATUS_REG_OFFSET ); /* Reset TC */ |
outb | 217 | drivers/scsi/pas16.c | outb( 0x01, io_port + WAIT_STATE ); /* 1 Wait state */ |
outb | 233 | drivers/scsi/pas16.c | outb( 0x4d, io_port + SYS_CONFIG_4 ); |
outb | 238 | drivers/scsi/pas16.c | outb( tmp, io_port + IO_CONFIG_3 ); |
outb | 241 | drivers/scsi/pas16.c | outb( 0x6d, io_port + SYS_CONFIG_4 ); |
outb | 278 | drivers/scsi/pas16.c | outb( tmp, io_port + PCB_CONFIG ); |
outb | 280 | drivers/scsi/pas16.c | outb( board_rev, io_port + PCB_CONFIG ); |
outb | 293 | drivers/scsi/pas16.c | outb( 0x01, io_port + WAIT_STATE ); /* 1 Wait state */ |
outb | 406 | drivers/scsi/pas16.c | outb( 0x4d, io_port + SYS_CONFIG_4 ); |
outb | 407 | drivers/scsi/pas16.c | outb( (inb(io_port + IO_CONFIG_3) & 0x0f), io_port + IO_CONFIG_3 ); |
outb | 493 | drivers/scsi/pas16.c | outb( P_TS_CT, instance->io_port + P_TIMEOUT_STATUS_REG_OFFSET); |
outb | 525 | drivers/scsi/pas16.c | outb( P_TS_CT, instance->io_port + P_TIMEOUT_STATUS_REG_OFFSET); |
outb | 166 | drivers/scsi/pas16.h | #define NCR5380_write(reg, value) ( outb((value),PAS16_io_port(reg)) ) |
outb | 175 | drivers/scsi/pas16.h | outb( (value),PAS16_io_port(reg) ) ) |
outb | 153 | drivers/scsi/qlogic.c | #define REG0 ( outb( inb( qbase + 0xd ) & 0x7f , qbase + 0xd ), outb( 4 , qbase + 0xd )) |
outb | 154 | drivers/scsi/qlogic.c | #define REG1 ( outb( inb( qbase + 0xd ) | 0x80 , qbase + 0xd ), outb( 0xb4 | QL_INT_ACTIVE_HIGH , qbase + 0xd )) |
outb | 164 | drivers/scsi/qlogic.c | #define rtrc(i) {inb(0x3da);outb(0x31,0x3c0);outb((i),0x3c0);} |
outb | 182 | drivers/scsi/qlogic.c | outb(3, qbase + 3); /* reset SCSI */ |
outb | 183 | drivers/scsi/qlogic.c | outb(2, qbase + 3); /* reset chip */ |
outb | 257 | drivers/scsi/qlogic.c | outb(*request++, qbase + 4); |
outb | 305 | drivers/scsi/qlogic.c | outb(2, qbase + 3); /* reset chip */ |
outb | 307 | drivers/scsi/qlogic.c | outb(1, qbase + 3); /* clear fifo */ |
outb | 310 | drivers/scsi/qlogic.c | outb(1, qbase + 8); /* set for PIO pseudo DMA */ |
outb | 311 | drivers/scsi/qlogic.c | outb(0, qbase + 0xb); /* disable ints */ |
outb | 314 | drivers/scsi/qlogic.c | outb(0x40, qbase + 0xb); /* enable features */ |
outb | 317 | drivers/scsi/qlogic.c | outb( qlcfgc , qbase + 0xc); |
outb | 319 | drivers/scsi/qlogic.c | outb( 0x40 | qlcfg8 | qinitid, qbase + 8); |
outb | 320 | drivers/scsi/qlogic.c | outb( qlcfg7 , qbase + 7 ); |
outb | 321 | drivers/scsi/qlogic.c | outb( qlcfg6 , qbase + 6 ); |
outb | 323 | drivers/scsi/qlogic.c | outb(qlcfg5, qbase + 5); /* select timer */ |
outb | 324 | drivers/scsi/qlogic.c | outb(qlcfg9 & 7, qbase + 9); /* prescaler */ |
outb | 326 | drivers/scsi/qlogic.c | outb(cmd->target, qbase + 4); |
outb | 329 | drivers/scsi/qlogic.c | outb(cmd->cmnd[i], qbase + 2); |
outb | 331 | drivers/scsi/qlogic.c | outb(0x41, qbase + 3); /* select and send command */ |
outb | 371 | drivers/scsi/qlogic.c | outb(1, qbase + 3); /* clear fifo */ |
outb | 377 | drivers/scsi/qlogic.c | outb(reqlen, qbase); /* low-mid xfer cnt */ |
outb | 378 | drivers/scsi/qlogic.c | outb(reqlen >> 8, qbase+1); /* low-mid xfer cnt */ |
outb | 379 | drivers/scsi/qlogic.c | outb(reqlen >> 16, qbase + 0xe); /* high xfer cnt */ |
outb | 380 | drivers/scsi/qlogic.c | outb(0x90, qbase + 3); /* command do xfer */ |
outb | 415 | drivers/scsi/qlogic.c | outb(0x11, qbase + 3); /* get status and message */ |
outb | 427 | drivers/scsi/qlogic.c | outb(0x12, qbase + 3); /* done, disconnect */ |
outb | 567 | drivers/scsi/qlogic.c | outb(1, qbase + 8); /* set for PIO pseudo DMA */ |
outb | 569 | drivers/scsi/qlogic.c | outb(0x40 | qlcfg8 | qinitid, qbase + 8); /* (ini) bus id, disable scsi rst */ |
outb | 570 | drivers/scsi/qlogic.c | outb(qlcfg5, qbase + 5); /* select timer */ |
outb | 571 | drivers/scsi/qlogic.c | outb(qlcfg9, qbase + 9); /* prescaler */ |
outb | 573 | drivers/scsi/qlogic.c | outb( 3 , qbase + 3 ); |
outb | 586 | drivers/scsi/qlogic.c | outb(0x90, qbase + 3); /* illegal command - cause interrupt */ |
outb | 588 | drivers/scsi/qlogic.c | outb(10, 0x20); /* access pending interrupt map */ |
outb | 589 | drivers/scsi/qlogic.c | outb(10, 0xa0); |
outb | 591 | drivers/scsi/qlogic.c | outb(0xb0 | QL_INT_ACTIVE_HIGH , qbase + 0xd); /* int pin off */ |
outb | 593 | drivers/scsi/qlogic.c | outb(0xb4 | QL_INT_ACTIVE_HIGH , qbase + 0xd); /* int pin on */ |
outb | 317 | drivers/scsi/u14-34f.c | outb(CMD_CLR_INTR, sh[j]->io_port + REG_SYS_INTR); |
outb | 323 | drivers/scsi/u14-34f.c | outb(CMD_OGM_INTR, sh[j]->io_port + REG_LCL_INTR); |
outb | 448 | drivers/scsi/u14-34f.c | if (sh[j]->base == 0) outb(CMD_ENA_INTR, sh[j]->io_port + REG_SYS_MASK); |
outb | 644 | drivers/scsi/u14-34f.c | outb(CMD_OGM_INTR, sh[j]->io_port + REG_LCL_INTR); |
outb | 775 | drivers/scsi/u14-34f.c | outb(CMD_RESET, sh[j]->io_port + REG_LCL_INTR); |
outb | 867 | drivers/scsi/u14-34f.c | outb(CMD_CLR_INTR, sh[j]->io_port + REG_SYS_INTR); |
outb | 440 | drivers/scsi/ultrastor.c | outb(ultrastor_bus_reset ? 0xc2 : 0x82, LCL_DOORBELL_MASK(config.port_address)); |
outb | 612 | drivers/scsi/ultrastor.c | outb(0, addr + 0x16); |
outb | 613 | drivers/scsi/ultrastor.c | outb(0, addr + 0x1B); |
outb | 617 | drivers/scsi/ultrastor.c | outb(ultrastor_bus_reset ? 0xc2 : 0x82, LCL_DOORBELL_MASK(addr+12)); |
outb | 618 | drivers/scsi/ultrastor.c | outb(0x02, SYS_DOORBELL_MASK(addr+12)); |
outb | 792 | drivers/scsi/ultrastor.c | outb(1, config.ogm_address - 1); |
outb | 793 | drivers/scsi/ultrastor.c | outb(0x2, LCL_DOORBELL_INTR(config.doorbell_address)); |
outb | 795 | drivers/scsi/ultrastor.c | outb(0x1, LCL_DOORBELL_INTR(config.doorbell_address)); |
outb | 903 | drivers/scsi/ultrastor.c | outb(0x80, config.ogm_address - 1); |
outb | 904 | drivers/scsi/ultrastor.c | outb(0x2, LCL_DOORBELL_INTR(config.doorbell_address)); |
outb | 963 | drivers/scsi/ultrastor.c | outb(0xc0, LCL_DOORBELL_INTR(config.doorbell_address)); |
outb | 966 | drivers/scsi/ultrastor.c | outb(0, config.ogm_address - 1); |
outb | 967 | drivers/scsi/ultrastor.c | outb(0, config.icm_address - 1); |
outb | 1055 | drivers/scsi/ultrastor.c | outb(2, SYS_DOORBELL_INTR(config.doorbell_address)); |
outb | 1056 | drivers/scsi/ultrastor.c | outb(0, config.icm_address - 1); |
outb | 1071 | drivers/scsi/ultrastor.c | outb(1, SYS_DOORBELL_INTR(config.doorbell_address)); |
outb | 536 | drivers/scsi/wd7000.c | outb(host->control, host->iobase+ASC_CONTROL); |
outb | 543 | drivers/scsi/wd7000.c | outb(host->control,host->iobase+ASC_CONTROL); |
outb | 576 | drivers/scsi/wd7000.c | outb(*cmd, host->iobase+ASC_COMMAND); |
outb | 802 | drivers/scsi/wd7000.c | #define wd7000_intr_ack(host) outb(0,host->iobase+ASC_INTR_ACK) |
outb | 999 | drivers/scsi/wd7000.c | outb(ASC_RES, host->iobase+ASC_CONTROL); |
outb | 1001 | drivers/scsi/wd7000.c | outb(0,host->iobase+ASC_CONTROL); |
outb | 163 | drivers/sound/os.h | #define OUTB outb |
outb | 23 | include/asm-alpha/dma.h | #define dma_outb outb |
outb | 258 | include/asm-alpha/jensen.h | extern void outb(unsigned char b, unsigned long addr); |
outb | 274 | include/asm-alpha/jensen.h | (__builtin_constant_p((port))?__outb((x),(port)):(outb)((x),(port))) |
outb | 277 | include/asm-alpha/jensen.h | #define outb_p outb |
outb | 288 | include/asm-alpha/lca.h | extern void outb(unsigned char b, unsigned long addr); |
outb | 302 | include/asm-alpha/lca.h | (__builtin_constant_p((port))?__outb((x),(port)):(outb)((x),(port))) |
outb | 305 | include/asm-alpha/lca.h | #define outb_p outb |
outb | 17 | include/asm-i386/dma.h | #define dma_outb outb |
outb | 17 | include/asm-mips/dma.h | #define dma_outb outb |
outb | 90 | include/asm-sparc/io.h | #define outb_p outb |
outb | 57 | include/linux/busmouse.h | #define MSE_INT_OFF() outb(MSE_DISABLE_INTERRUPTS, MSE_CONTROL_PORT) |
outb | 58 | include/linux/busmouse.h | #define MSE_INT_ON() outb(MSE_ENABLE_INTERRUPTS, MSE_CONTROL_PORT) |
outb | 79 | include/linux/busmouse.h | #define MS_MSE_INT_OFF() {outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT); \ |
outb | 80 | include/linux/busmouse.h | outb(MS_MSE_DISABLE_INTERRUPTS, MS_MSE_DATA_PORT);} |
outb | 81 | include/linux/busmouse.h | #define MS_MSE_INT_ON() {outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT); \ |
outb | 82 | include/linux/busmouse.h | outb(MS_MSE_ENABLE_INTERRUPTS, MS_MSE_DATA_PORT);} |
outb | 401 | include/linux/sbpcd.h | #define OUT(x,y) outb(y,x) |
outb | 123 | include/linux/scc.h | #define Outb(port, val) outb(val, port) |